Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.17 kernel cycle:
New drivers:
- Nintendo Wii GameCube GPIO, known as "Hollywood"
- Raspberry Pi mailbox service GPIO expander
- Spreadtrum main SC9860 SoC and IEC GPIO controllers.
Improvements:
- Implemented .get_multiple() callback for most of the
high-performance industrial GPIO cards for the ISA bus.
- ISA GPIO drivers now select the ISA_BUS_API instead of depending on
it. This is merged with the same pattern for all the ISA drivers
and some other Kconfig cleanups related to this.
Cleanup:
- Delete the TZ1090 GPIO drivers following the deletion of this SoC
from the ARM tree.
- Move the documentation over to driver-api to conform with the rest
of the kernel documentation build.
- Continue to make the GPIO drivers include only
<linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we
want to get rid of.
- Managed to remove VLA allocation from two drivers pending more
fixes in this area for the next merge window.
- Misc janitorial fixes"
* tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
gpio: Add Spreadtrum PMIC EIC driver support
gpio: Add Spreadtrum EIC driver support
dt-bindings: gpio: Add Spreadtrum EIC controller documentation
gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
pinctrl: qcom: Don't allow protected pins to be requested
gpiolib: Support 'gpio-reserved-ranges' property
gpiolib: Change bitmap allocation to kmalloc_array
gpiolib: Extract mask allocation into subroutine
dt-bindings: gpio: Add a gpio-reserved-ranges property
gpio: mockup: fix a potential crash when creating debugfs entries
gpio: pca953x: add compatibility for pcal6524 and pcal9555a
gpio: dwapb: Add support for a bus clock
gpio: Remove VLA from xra1403 driver
gpio: Remove VLA from MAX3191X driver
gpio: ws16c48: Implement get_multiple callback
gpio: gpio-mm: Implement get_multiple callback
gpio: 104-idi-48: Implement get_multiple callback
gpio: 104-dio-48e: Implement get_multiple callback
gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
gpio: pci-idio-16: Implement get_multiple callback
...
It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.
As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PC/104 device driver Kconfig options previously had an implicit EXPERT
dependency by way of an explicit ISA_BUS_API dependency. Now that these
driver Kconfig options select ISA_BUS_API rather than depend on it, the
PC104 Kconfig option should have an explicit EXPERT dependency.
The PC/104 form factor and bus architecture are common in embedded
and specialized systems, but uncommon in typical desktop setups. For
this reason, it is best to mask these devices and configurations via the
EXPERT Kconfig option because the majority of users will never need to
concern themselves with PC/104.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull scheduler fixes from Ingo Molnar:
"A Kconfig fix, a build fix and a membarrier bug fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
membarrier: Disable preemption when calling smp_call_function_many()
sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST
ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
Daniel Borkmann says:
====================
pull-request: bpf 2018-01-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Prevent out-of-bounds speculation in BPF maps by masking the
index after bounds checks in order to fix spectre v1, and
add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for
removing the BPF interpreter from the kernel in favor of
JIT-only mode to make spectre v2 harder, from Alexei.
2) Remove false sharing of map refcount with max_entries which
was used in spectre v1, from Daniel.
3) Add a missing NULL psock check in sockmap in order to fix
a race, from John.
4) Fix test_align BPF selftest case since a recent change in
verifier rejects the bit-wise arithmetic on pointers
earlier but test_align update was missing, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715.
A quote from goolge project zero blog:
"At this point, it would normally be necessary to locate gadgets in
the host kernel code that can be used to actually leak data by reading
from an attacker-controlled location, shifting and masking the result
appropriately and then using the result of that as offset to an
attacker-controlled address for a load. But piecing gadgets together
and figuring out which ones work in a speculation context seems annoying.
So instead, we decided to use the eBPF interpreter, which is built into
the host kernel - while there is no legitimate way to invoke it from inside
a VM, the presence of the code in the host kernel's text section is sufficient
to make it usable for the attack, just like with ordinary ROP gadgets."
To make attacker job harder introduce BPF_JIT_ALWAYS_ON config
option that removes interpreter from the kernel in favor of JIT-only mode.
So far eBPF JIT is supported by:
x64, arm64, arm32, sparc64, s390, powerpc64, mips64
The start of JITed program is randomized and code page is marked as read-only.
In addition "constant blinding" can be turned on with net.core.bpf_jit_harden
v2->v3:
- move __bpf_prog_ret0 under ifdef (Daniel)
v1->v2:
- fix init order, test_bpf and cBPF (Daniel's feedback)
- fix offloaded bpf (Jakub's feedback)
- add 'return 0' dummy in case something can invoke prog->bpf_func
- retarget bpf tree. For bpf-next the patch would need one extra hunk.
It will be sent when the trees are merged back to net-next
Considered doing:
int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT;
but it seems better to land the patch as-is and in bpf-next remove
bpf_jit_enable global variable from all JITs, consolidate in one place
and remove this jit_init() function.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
On uniprocessor systems, critical and non-critical tasks cannot be
isolated, as there is only a single CPU core. Hence enabling CPU
isolation by default on such systems does not make much sense.
Instead of changing the default for !SMP, fix this by making the feature
depend on SMP, with an override for compile-testing. Note that its sole
selector (NO_HZ_FULL) already depends on SMP.
This decreases kernel size for a default uniprocessor kernel by ca. 1 KiB.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2c43838c99 ("sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default")
Link: http://lkml.kernel.org/r/1514891590-20782-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
Localize PCI_QUIRKS in the PCI bus menu.
Move PCI_QUIRKS to the PCI bus menu instead of the (often broken) General
Setup EXPERT menu. The prompt still depends on EXPERT.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This was moved in commit 94e980cc45 ("Documentation/module-signing.txt:
convert to ReST markup") and was missed by commit 8c27ceff36 ("docs:
fix locations of several documents that got moved").
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The choice containing the CC_OPTIMIZE_FOR_PERFORMANCE symbol
accidentally added a "CONFIG_" prefix when trying to make it the
default, selecting an undefined symbol as the default.
The mistake is harmless here: Since the default symbol is not visible,
the choice falls back on using the visible symbol as the default
instead, which is CC_OPTIMIZE_FOR_PERFORMANCE, as intended.
A patch that makes Kconfig print a warning in this case has been
submitted separately:
http://www.spinics.net/lists/linux-kbuild/msg15566.html
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This SLUB free list pointer obfuscation code is modified from Brad
Spengler/PaX Team's code in the last public patch of grsecurity/PaX
based on my understanding of the code. Changes or omissions from the
original code are mine and don't reflect the original grsecurity/PaX
code.
This adds a per-cache random value to SLUB caches that is XORed with
their freelist pointer address and value. This adds nearly zero
overhead and frustrates the very common heap overflow exploitation
method of overwriting freelist pointers.
A recent example of the attack is written up here:
http://cyseclabs.com/blog/cve-2016-6187-heap-off-by-one-exploit
and there is a section dedicated to the technique the book "A Guide to
Kernel Exploitation: Attacking the Core".
This is based on patches by Daniel Micay, and refactored to minimize the
use of #ifdef.
With 200-count cycles of "hackbench -g 20 -l 1000" I saw the following
run times:
before:
mean 10.11882499999999999995
variance .03320378329145728642
stdev .18221905304181911048
after:
mean 10.12654000000000000014
variance .04700556623115577889
stdev .21680767106160192064
The difference gets lost in the noise, but if the above is to be taken
literally, using CONFIG_FREELIST_HARDENED is 0.07% slower.
Link: http://lkml.kernel.org/r/20170802180609.GA66807@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tycho Andersen <tycho@docker.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup changes from Tejun Heo:
- Waiman made the debug controller work and a lot more useful on
cgroup2
- There were a couple issues with cgroup subtree delegation. The
documentation on delegating to a non-root user was missing some part
and cgroup namespace support wasn't factoring in delegation at all.
The documentation is updated and the now there is a mount option to
make cgroup namespace fit for delegation
* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: implement "nsdelegate" mount option
cgroup: restructure cgroup_procs_write_permission()
cgroup: "cgroup.subtree_control" should be writeable by delegatee
cgroup: fix lockdep warning in debug controller
cgroup: refactor cgroup_masks_read() in the debug controller
cgroup: make debug an implicit controller on cgroup2
cgroup: Make debug cgroup support v2 and thread mode
cgroup: Make Kconfig prompt of debug cgroup more accurate
cgroup: Move debug cgroup to its own file
cgroup: Keep accurate count of tasks in each css_set
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
The Kconfig prompt and description of the debug cgroup controller
more accurate by saying that it is for debug purpose only and its
interfaces are unstable.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
RCU's Kconfig options are scattered, and there are enough of them
that it would be good for them to be more centralized. This commit
therefore extracts RCU's Kconfig options from init/Kconfig into a new
kernel/rcu/Kconfig file.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_NOCB_CPU_ALL, CONFIG_RCU_NOCB_CPU_NONE, and
CONFIG_RCU_NOCB_CPU_ZERO Kconfig options are used only in testing and
are redundant with the rcu_nocbs= boot parameter. This commit therefore
removes these three Kconfig options and adjusts the rcutorture scripts
to use the boot parameter instead.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU's debugfs tracing used to be the only reasonable low-level debug
information available, but ftrace and event tracing has since surpassed
the RCU debugfs level of usefulness. This commit therefore removes
RCU's debugfs tracing.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Classic SRCU was only ever intended to be a fallback in case of issues
with Tree/Tiny SRCU, and the latter two are doing quite well in testing.
This commit therefore removes Classic SRCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can
also be done with the rcutree.kthread_prio kernel boot parameter.
This commit therefore removes this Kconfig option.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
The rcu_segcblist structure provides quite a bit of functionality, and
Tiny SRCU needs almost none of it. So this commit replaces Tiny SRCU's
uses of rcu_segcblist with a simple singly linked list with tail pointer.
This change significantly reduces Tiny SRCU's memory footprint, more
than making up for the growth caused by the creation of rcu_segcblist.c
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit d160a727c4 ("srcu: Make SRCU be built by default") in response
to build errors, which were caused by code that included srcu.h
despite !SRCU. However, srcutiny.o is almost 2K of code, which is not
insignificant for those attempting to run the Linux kernel on IoT devices.
This commit therefore makes SRCU be once again optional, and adjusts
srcu.h to allow error-free inclusion in !SRCU kernel builds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
This commit creates a new kernel/rcu/rcu_segcblist.c file that
contains non-trivial segcblist functions. Trivial functions
remain as static inline functions in kernel/rcu/rcu_segcblist.h
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
SRCU is optional, and included only if there is a "select SRCU" in effect.
However, we now have Tiny SRCU, so this commit defaults CONFIG_SRCU=y.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If the CONFIG_SRCU option is not selected, for example, when building
arch/tile allnoconfig, the following build errors appear:
kernel/rcu/tree.o: In function `srcu_online_cpu':
tree.c:(.text+0x4248): multiple definition of `srcu_online_cpu'
kernel/rcu/srcutree.o:srcutree.c:(.text+0x2120): first defined here
kernel/rcu/tree.o: In function `srcu_offline_cpu':
tree.c:(.text+0x4250): multiple definition of `srcu_offline_cpu'
kernel/rcu/srcutree.o:srcutree.c:(.text+0x2160): first defined here
The corresponding .config file shows CONFIG_TREE_SRCU=y, but no sign
of CONFIG_SRCU, which fatally confuses SRCU's #ifdefs, resulting in
the above errors. The reason this occurs is the folowing line in
init/Kconfig's definition for TREE_SRCU:
default y if !TINY_RCU && !CLASSIC_SRCU
If CONFIG_CLASSIC_SRCU=n, as it will be in for allnoconfig, and if
CONFIG_SMP=y, then we will get CONFIG_TREE_SRCU=y but no CONFIG_SRCU,
as seen in the .config file, and which will result in the above errors.
This error did not show up during rcutorture testing because rcutorture
forces CONFIG_SRCU=y, as it must to prevent build errors in rcutorture.c.
This commit therefore conditions TREE_SRCU (and TINY_SRCU, while it is
at it) with SRCU, like this:
default y if SRCU && !TINY_RCU && !CLASSIC_SRCU
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170423162205.GP3956@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If you set RCU_FANOUT_LEAF too high, you can get lock contention
on the leaf rcu_node, and you should boot with the skew_tick kernel
parameter set in order to avoid this lock contention. This commit
therefore upgrades the RCU_FANOUT_LEAF help text to explicitly state
this.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The TREE_SRCU rewrite is large and a bit on the non-simple side, so
this commit helps reduce risk by allowing the old v4.11 SRCU algorithm
to be selected using a new CLASSIC_SRCU Kconfig option that depends
on RCU_EXPERT. The default is to use the new TREE_SRCU and TINY_SRCU
algorithms, in order to help get these the testing that they need.
However, if your users do not require the update-side scalability that
is to be provided by TREE_SRCU, select RCU_EXPERT and then CLASSIC_SRCU
to revert back to the old classic SRCU algorithm.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In response to automated complaints about modifications to SRCU
increasing its size, this commit creates a tiny SRCU that is
used in SMP=n && PREEMPT=n builds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull cgroup updates from Tejun Heo:
"Several noteworthy changes.
- Parav's rdma controller is finally merged. It is very straight
forward and can limit the abosolute numbers of common rdma
constructs used by different cgroups.
- kernel/cgroup.c got too chubby and disorganized. Created
kernel/cgroup/ subdirectory and moved all cgroup related files
under kernel/ there and reorganized the core code. This hurts for
backporting patches but was long overdue.
- cgroup v2 process listing reimplemented so that it no longer
depends on allocating a buffer large enough to cache the entire
result to sort and uniq the output. v2 has always mangled the sort
order to ensure that users don't depend on the sorted output, so
this shouldn't surprise anybody. This makes the pid listing
functions use the same iterators that are used internally, which
have to have the same iterating capabilities anyway.
- perf cgroup filtering now works automatically on cgroup v2. This
patch was posted a long time ago but somehow fell through the
cracks.
- misc fixes asnd documentation updates"
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits)
kernfs: fix locking around kernfs_ops->release() callback
cgroup: drop the matching uid requirement on migration for cgroup v2
cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy
cgroup: misc cleanups
cgroup: call subsys->*attach() only for subsystems which are actually affected by migration
cgroup: track migration context in cgroup_mgctx
cgroup: cosmetic update to cgroup_taskset_add()
rdmacg: Fixed uninitialized current resource usage
cgroup: Add missing cgroup-v2 PID controller documentation.
rdmacg: Added documentation for rdmacg
IB/core: added support to use rdma cgroup controller
rdmacg: Added rdma cgroup controller
cgroup: fix a comment typo
cgroup: fix RCU related sparse warnings
cgroup: move namespace code to kernel/cgroup/namespace.c
cgroup: rename functions for consistency
cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c
cgroup: separate out cgroup1_kf_syscall_ops
cgroup: refactor mount path and clearly distinguish v1 and v2 paths
cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c
...
Merge updates from Andrew Morton:
"142 patches:
- DAX updates
- various misc bits
- OCFS2 updates
- most of MM"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (142 commits)
mm/z3fold.c: limit first_num to the actual range of possible buddy indexes
mm: fix <linux/pagemap.h> stray kernel-doc notation
zram: remove obsolete sysfs attrs
mm/memblock.c: remove unnecessary log and clean up
oom-reaper: use madvise_dontneed() logic to decide if unmap the VMA
mm: drop unused argument of zap_page_range()
mm: drop zap_details::check_swap_entries
mm: drop zap_details::ignore_dirty
mm, page_alloc: warn_alloc nodemask is NULL when cpusets are disabled
mm: help __GFP_NOFAIL allocations which do not trigger OOM killer
mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically
mm: consolidate GFP_NOFAIL checks in the allocator slowpath
lib/show_mem.c: teach show_mem to work with the given nodemask
arch, mm: remove arch specific show_mem
mm, page_alloc: warn_alloc print nodemask
mm, page_alloc: do not report all nodes in show_mem
Revert "mm: bail out in shrink_inactive_list()"
mm, vmscan: consider eligible zones in get_scan_count
mm, vmscan: cleanup lru size claculations
mm, vmscan: do not count freed pages as PGDEACTIVATE
...
Pull printk updates from Petr Mladek:
- Add Petr Mladek, Sergey Senozhatsky as printk maintainers, and Steven
Rostedt as the printk reviewer. This idea came up after the
discussion about printk issues at Kernel Summit. It was formulated
and discussed at lkml[1].
- Extend a lock-less NMI per-cpu buffers idea to handle recursive
printk() calls by Sergey Senozhatsky[2]. It is the first step in
sanitizing printk as discussed at Kernel Summit.
The change allows to see messages that would normally get ignored or
would cause a deadlock.
Also it allows to enable lockdep in printk(). This already paid off.
The testing in linux-next helped to discover two old problems that
were hidden before[3][4].
- Remove unused parameter by Sergey Senozhatsky. Clean up after a past
change.
[1] http://lkml.kernel.org/r/1481798878-31898-1-git-send-email-pmladek@suse.com
[2] http://lkml.kernel.org/r/20161227141611.940-1-sergey.senozhatsky@gmail.com
[3] http://lkml.kernel.org/r/20170215044332.30449-1-sergey.senozhatsky@gmail.com
[4] http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: drop call_console_drivers() unused param
printk: convert the rest to printk-safe
printk: remove zap_locks() function
printk: use printk_safe buffers in printk
printk: report lost messages in printk safe/nmi contexts
printk: always use deferred printk when flush printk_safe lines
printk: introduce per-cpu safe_print seq buffer
printk: rename nmi.c and exported api
printk: use vprintk_func in vprintk()
MAINTAINERS: Add printk maintainers
