Commit Graph

741 Commits

Author SHA1 Message Date
Antonio Quartulli
5d2c05b213 batman-adv: add per VLAN interface attribute framework
Since batman-adv is now fully VLAN-aware, a proper framework
able to handle per-vlan-interface attributes is needed.

Those attributes will affect the associated VLAN interface
only, rather than the real soft_iface (which would result
in every vlan interface having the same attribute
configuration).

To make the code simpler and easier to extend, attributes
associated to the standalone soft_iface are now treated
like belonging to yet another vlan having a special vid.
This vid is different from the others because it is made up
by all zeros and the VLAN_HAS_TAG bit is not set.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:28:08 +02:00
Antonio Quartulli
be1db4f661 batman-adv: make the Distributed ARP Table vlan aware
The same IP subnet can be used on different VLANs, therefore
DAT has to differentiate whether the IP to resolve belongs
to one or the other virtual LAN.
To accomplish this task DAT has to deal with the VLAN tag
and store it together with each ARP entry.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:28:07 +02:00
Antonio Quartulli
bbb877ed77 batman-adv: make the GW module correctly talk to the new VLAN-TT
The gateway code is now adapted in order to correctly
interact with the Translation Table component by using the
vlan ID

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:27:11 +02:00
Antonio Quartulli
1605278901 batman-adv: print the VID together with the TT entries
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 15:11:25 +02:00
Antonio Quartulli
0ffa9e8d86 batman-adv: use vid when computing local and global TT CRC
now that each TT entry is characterised by a VLAN ID, the
latter has to be taken into consideration when computing the
local/global table CRC as it would be theoretically possible
to have the same client in two different VLANs

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 15:11:24 +02:00
Antonio Quartulli
c018ad3de6 batman-adv: add the VLAN ID attribute to the TT entry
To make the translation table code VLAN-aware, each entry
must carry the VLAN ID which it belongs to. This patch adds
such attribute to the related TT structures.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 15:11:21 +02:00
Marek Lindner
bc58eeef74 batman-adv: update email address for Marek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19 14:53:48 +02:00
Simon Wunderlich
c679ff8fb2 batman-adv: update email address for Simon Wunderlich
My university will stop email service for alumni in january 2014, please
use my new e-mail address instead.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-19 14:53:41 +02:00
Antonio Quartulli
33faa04547 batman-adv: check skb preparation return value
Fix bogus merge conflict resolution by checking the return
values of the skb preparation routines.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19 14:46:32 +02:00
Linus Lüssing
a4deee1ad4 batman-adv: Add dummy soft-interface rx mode handler
We do not actually need to set any rx filters for the virtual batman
soft interface. However a dummy handler enables a user to set static
multicast listeners for instance.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 17:17:12 +02:00
Antonio Quartulli
e8cf234a4e batman-adv: make batadv_tt_save_orig_buffer() generic
This is a simple batadv_tt_save_orig_buffer() refactoring
aiming to make it more generic and avoid useless casts.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 17:17:11 +02:00
Antonio Quartulli
298e6e685b batman-adv: implement batadv_tt_entries
Implement batadv_tt_entries() to get the number of entries
fitting in a given amount of bytes. This computation is done
several times in the code and therefore it is useful to have
an helper function.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 17:17:11 +02:00
Simon Wunderlich
56a5ca8409 batman-adv: remove useless find_router look up
This is not used anymore with the new fragmentation, and it might
actually mess up the bonding code because find_router() assumes it
is only called once per packet.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 17:17:10 +02:00
Marek Lindner
411d6ed93a batman-adv: consider network coding overhead when calculating required mtu
The module prints a warning when the MTU on the hard interface is too
small to transfer payload traffic without fragmentation. The required
MTU is calculated based on the encapsulation header size. If network
coding is compild into the module its header size is taken into
account as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 17:17:09 +02:00
Antonio Quartulli
0bf84c160a batman-adv: create common header for ICMP packets
the icmp and the icmp_rr packets share the same initial
fields since they use the same code to be processed and
forwarded.

Extract the common fields and put them into a separate
struct so that future ICMP packets can be easily added
without bloating the packet definition.

However, keep the seqno field outside of the newly created
common header because future ICMP types may require a
bigger sequence number space.

This change breaks compatibility due to fields reordering
in the ICMP headers.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 17:17:09 +02:00
Antonio Quartulli
293e93385e batman-adv: use htons when possible
When comparing a network ordered value with a constant, it
is better to convert the constant at compile time by means
of htons() instead of converting the value at runtime using
ntohs().

This refactoring may slightly improve the code performance.

Moreover substitute __constant_htons() with htons() since
the latter increase readability and it is smart enough to be
as efficient as the former

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-10-12 11:59:23 +02:00
Martin Hundebøll
ee75ed8887 batman-adv: Fragment and send skbs larger than mtu
Non-broadcast packets larger than MTU are fragmented and sent with
an encapsulating header. Up to 16 fragments are supported, which are
sent in reverse order on the wire to allow minimal memory copying when
creating fragments.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 11:58:35 +02:00
Martin Hundebøll
610bfc6bc9 batman-adv: Receive fragmented packets and merge
Fragments arriving at their destination are buffered for later merge.
Merged packets are passed to the main receive function as had they never
been fragmented.

Fragments are forwarded without merging if the MTU of the outgoing
interface is smaller than the size of the merged packet.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 11:58:34 +02:00
Martin Hundebøll
f097e25dbe batman-adv: Remove old fragmentation code
Remove the existing fragmentation code before adding the new version
and delete unicast.{h,c}.

batadv_unicast_send_skb() is moved to send.c and renamed to
batadv_send_skb_unicast().

fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in
the new fragmentation code.

BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the
new fragmentation code.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 11:58:33 +02:00
Antonio Quartulli
2c598663e8 batman-adv: use VLAN_ETH_HLEN instead of sizeof(struct vlan_eth_hdr)
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 11:58:33 +02:00
Antonio Quartulli
f7f8ed5695 batman-adv: h_vlan_encapsulated_proto access refactoring
In case of a VLAN tagged frame the ethhdr pointer is
moved forward by 4 bytes so that the offset of h_proto
in struct ethhdr matches the real
h_vlan_encapsulated_proto address in the skb. While this
trickery is correct it makes the code harder to understand
and may lead to bugs in case of re-use of ethhdr for other
purposes.

This patch introduces a proto variable to make things
cleaner and easier to understand.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 11:58:30 +02:00
Antonio Quartulli
2102605947 batman-adv: don't use call_rcu if not needed
batadv_tt_global_entry_free_ref uses call_rcu to schedule a
function which will only free the global entry itself.

For this reason call_rcu is useless and kfree_rcu can be
used to simplify the code.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 09:51:28 +02:00
Antonio Quartulli
d7ee88d048 batman-adv: remove batadv_tt_global_add_orig declaration
batadv_tt_global_add_orig is neither used nor implemented
anymore, therefore it is possible to remove its declaration

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 09:51:28 +02:00
Antonio Quartulli
1e5d49fce3 batman-adv: make tt_global_add static and return bool
batadv_tt_global_add is not used anymore outside of the TT
code thanks to the TVLV implementation. It can therefore be
declared as static

Last user has been removed by 3de4e64df0f1326db7cc0ef25f5af8522850252d
("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")

Moreover make it return bool since its result can be either 0 or 1.

Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12 09:51:27 +02:00
Simon Wunderlich
97dbc03b47 batman-adv: only add recordroute information to icmp request/reply
Adding host information for record route is only required for ICMP
requests and replys, and should not be added to just any (future?)
packet type.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12 09:51:26 +02:00
Simon Wunderlich
18c68d5960 batman-adv: reorder batadv_iv_flags
The vis flag is not needed anymore, and since we do a compat bump we
can start with the first bit again

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:35 +02:00
Simon Wunderlich
9284a47e8b batman-adv: remove packed from batadv_ogm_packet
As we decreased the struct size from 26 to 24 byte, we can remove
__packed as the compiler will not add any more padding.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:34 +02:00
Simon Wunderlich
a1f1ac5c4d batman-adv: reorder packet types
Reordering the packet type numbers allows us to handle unicast
packets in a general way - even if we don't know the specific packet
type, we can still forward it. There was already code handling
this for a couple of unicast packets, and this is the more
generalized version to do that.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:34 +02:00
Simon Wunderlich
80067c8320 batman-adv: add build check macros for packet member offset
Since we removed the __packed from most of the packets, we should
make sure that the offset generated by the compiler are correct for
sent/received data.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:33 +02:00
Simon Wunderlich
9f4980e68b batman-adv: remove vis functionality
This is replaced by a userspace program, we don't need this
functionality to bloat the kernel.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:32 +02:00
Antonio Quartulli
0035f97e65 batman-adv: move BATADV_TT_CLIENT_TEMP to higher bit
Client flags from bit 0 to 7 are sent over the wire.
BATADV_TT_CLIENT_TEMP is a local flag and is not supposed
to be sent to the network. Therefore it has occupy a
higher bit.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-09 21:22:32 +02:00
Antonio Quartulli
ced72933a5 batman-adv: use CRC32C instead of CRC16 in TT code
CRC32C has to be preferred to CRC16 because of its possible
HW native support and because of the reduced collision
probability. With this change the Translation Table
component now uses CRC32C to compute the local and global
table checksum.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-09 21:22:31 +02:00
Marek Lindner
122edaa059 batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets
Instead of generating roaming specific packets the TVLV unicast API is
used to send roaming information.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:30 +02:00
Marek Lindner
335fbe0f5d batman-adv: tvlv - convert tt query packet to use tvlv unicast packets
Instead of generating TT specific packets the TVLV unicast API is used
to send translation table data.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:30 +02:00
Marek Lindner
e1bf0c1409 batman-adv: tvlv - convert tt data sent within OGMs
The translation table meta data (version number, crc checksum, etc)
as well as the translation table diff propgated within OGMs now uses
the newly introduced tvlv infrastructure.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:29 +02:00
Marek Lindner
3f4841ffb3 batman-adv: tvlv - add network coding container
Create network coding container to announce network coding
capabilities (if enabled).

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:28 +02:00
Marek Lindner
17cf0ea455 batman-adv: tvlv - add distributed arp table container
Create DAT container to announce DAT capabilities (if enabled).

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:27 +02:00
Marek Lindner
414254e342 batman-adv: tvlv - gateway download/upload bandwidth container
Prior to this patch batman-adv read the advertised uplink bandwidth
from userspace and compressed this information into a single byte
called "gateway class".
Now the download & upload bandwidth information is sent as-is. No
userspace change is necessary since the sysfs API always allowed
to specify a bandwidth.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:27 +02:00
Marek Lindner
ef26157747 batman-adv: tvlv - basic infrastructure
The goal is to provide the infrastructure for sending, receiving and
parsing information 'containers' while preserving backward
compatibility. TVLV (based on the commonly known Type Length Value
technique) was chosen as the format for those containers. Even if a
node does not know the tvlv type of a certain container it can simply
skip the current container and proceed with the next. Past experience
has shown features evolve over time, so a 'version' field was added
right from the start to allow differentiating between feature
variants - hence the name: T(ype) V(ersion) L(ength) V(alue).

This patch introduces the basic TVLV infrastructure:
 * register / unregister tvlv containers to be sent with each OGM
   (on primary interfaces only)
 * register / unregister callback handlers to be called upon
   finding the corresponding tvlv type in a tvlv buffer
 * unicast tvlv send / receive API calls

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:26 +02:00
Antonio Quartulli
60cf7981b7 batman-adv: switch to a new packet compatibility version
With this change batman-adv is breaking compatibility with
older versions and it is moving to compat-version 15.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-10-09 21:22:25 +02:00
Matthias Schiffer
6c519bad7b batman-adv: set up network coding packet handlers during module init
batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).

The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).

Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-02 13:46:19 +02:00
Antonio Quartulli
4c18c425b2 batman-adv: set the TAG flag for the vid passed to BLA
When receiving or sending a packet a packet on a VLAN, the
vid has to be marked with the TAG flag in order to make any
component in batman-adv understand that the packet is coming
from a really tagged network.

This fix the Bridge Loop Avoidance behaviour which was not
able to send announces over VLAN interfaces.

Introduced by 0b1da1765fdb00ca5d53bc95c9abc70dfc9aae5b
("batman-adv: change VID semantic in the BLA code")

Signed-off-by: Antonio Quartulli <antonio@open-mesh.org>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-09-17 21:15:16 +02:00
Joe Perches
c3923b7a3d batman: Remove reference to compare_ether_addr
This function is being removed, rename the reference.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:34:48 -04:00
Antonio Quartulli
c6eaa3f067 batman-adv: send GW_DEL event when the gw client mode is deselected
Whenever the GW client mode is deselected, a DEL event has
to be sent in order to tell userspace that the current
gateway has been lost. Send the uevent on state change only
if a gateway was currently selected.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-28 11:33:00 +02:00
Simon Wunderlich
c00a072d3f batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28 11:31:52 +02:00
Antonio Quartulli
791c2a2d3f batman-adv: move enum definition at the top of the file
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28 11:31:51 +02:00
Simon Wunderlich
c54f38c9aa batman-adv: set skb priority according to content
The skb priority field may help the wireless driver to choose the right
queue (e.g. WMM queues). This should be set in batman-adv, as this
information is only available here.

This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that
only VLAN PCP is used if a VLAN header is present. Also initially set
TC_PRIO_CONTROL only for self-generated packets, and keep the priority
set by higher layers.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28 11:31:50 +02:00
Linus Lüssing
50fa3b31f4 batman-adv: check return type of unicast packet preparations
batadv_unicast(_4addr)_prepare_skb  might reallocate the skb's data.
And if it tries to do so then this can potentially fail.

We shouldn't continue working on this skb in such a case.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-17 20:02:32 +02:00
Linus Lüssing
9d2c9488ce batman-adv: fix potential kernel paging errors for unicast transmissions
There are several functions which might reallocate skb data. Currently
some places keep reusing their old ethhdr pointer regardless of whether
they became invalid after such a reallocation or not. This potentially
leads to kernel paging errors.

This patch fixes these by refetching the ethdr pointer after the
potential reallocations.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-10 22:55:42 +02:00
Wedson Almeida Filho
aeb193ea6c net: Unmap fragment page once iterator is done
Callers of skb_seq_read() are currently forced to call skb_abort_seq_read()
even when consuming all the data because the last call to skb_seq_read (the
one that returns 0 to indicate the end) fails to unmap the last fragment page.

With this patch callers will be allowed to traverse the SKB data by calling
skb_prepare_seq_read() once and repeatedly calling skb_seq_read() as originally
intended (and documented in the original commit 677e90eda), that is, only call
skb_abort_seq_read() if the sequential read is actually aborted.

Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24 01:46:01 -07:00
David S. Miller
d98cae64e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 16:49:39 -07:00
Simon Wunderlich
d5b4c93e67 batman-adv: Don't handle address updates when bla is disabled
The bridge loop avoidance has a hook to handle address updates of the
originator. These should not be handled when bridge loop avoidance is
disabled - it might send some bridge loop avoidance packets which should
not appear if bla is disabled.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-06-10 08:42:18 +02:00
Simon Wunderlich
7c24bbbeab batman-adv: forward late OGMs from best next hop
When a packet is received from another node first and later from the
best next hop, this packet is dropped. However the first OGM was sent
with the BATADV_NOT_BEST_NEXT_HOP flag and thus dropped by neighbors.
The late OGM from the best neighbor is then dropped because it is a
duplicate.

If this situation happens constantly, a node might end up not forwarding
the "valid" OGMs anymore, and nodes behind will starve from not getting
valid OGMs.

Fix this by refining the duplicate checking behaviour: The actions
should depend on whether it was a duplicate for a neighbor only or for
the originator. OGMs which are not duplicates for a specific neighbor
will now be considered in batadv_iv_ogm_forward(), but only actually
forwarded for the best next hop. Therefore, late OGMs from the best
next hop are forwarded now and not dropped as duplicates anymore.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-06-10 08:42:17 +02:00
Matthias Schiffer
ac16d1484e batman-adv: wait for rtnl in batadv_store_mesh_iface instead of failing if it is taken
The rtnl_lock in batadv_store_mesh_iface has been converted to a rtnl_trylock
some time ago to avoid a possible deadlock between rtnl and s_active on removal
of the sysfs nodes.

The behaviour introduced by that was quite confusing as it could lead to the
sysfs store to fail, making batman-adv setup scripts unreliable. As recently the
sysfs removal was postponed to a worker not running with the rtnl taken, the
deadlock can't occur any more and it is safe to change the trylock back to a
lock to make the sysfs store reliable again.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-06-10 08:42:16 +02:00
Simon Wunderlich
6715fd3f05 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:56 +02:00
Martin Hundebøll
e91ecfc64a batman-adv: Move call to batadv_nc_skb_forward() from routing.c to send.c
The call to batadv_nc_skb_forward() fits better in
batadv_send_skb_to_orig(), as this is where the actual next hop is
looked up.

To let the caller of batadv_send_skb_to_orig() know wether the skb is
transmitted, buffered or failed, the return value is changed from
boolean to int.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:55 +02:00
Antonio Quartulli
5f80df6705 batman-adv: print the VID properly
Since the MSB bits of any vid variable are now used for
storing flags, print the vid properly by taking the flags
away and printing -1 in case of VID representing no real
VLAN.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:55 +02:00
Antonio Quartulli
eb2deb6b39 batman-adv: change VID semantic in the BLA code
In order to make batman-adv fully vlan aware later, the
semantic used for variables storing the VLAN ID values has
to be changed in order to be adapted to the new one which
will be used batman-adv wide.

In particular, the VID has to be an "_unsigned_ short int"
and its 4 MSB will be used as a flag bitfield, while the
remaining 12 bits are used to store the real VID value

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-05-29 02:44:55 +02:00
Marek Lindner
aa27c31265 batman-adv: do not print orig nodes without nc neighbors on nc table print
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:55 +02:00
Linus Lüssing
e54c77f08e batman-adv: Remove unnecessary INIT_HLIST_NODE() calls
There's no need to for an explicit hlist_node initialization if it is
added to a list right away, like it's the case with the
hlist_add_head()s here.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:55 +02:00
Antonio Quartulli
d4ff40f683 batman-adv: pass a 16bit long flag argument to tt_global_add()
it may be the case that we want to store some local TT client flags in a global
entry, therefore the tt_global_add needs to get a proper argument for this

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:55 +02:00
Antonio Quartulli
41ab6c4891 batman-adv: don't deal with NET_IP_ALIGN manually
Instead of dealing with NET_IP_ALIGN during allocation and
headroom reservation, it is possible to use
netdev_alloc_skb_ip_align() which transparently allocate
and reserve the correct amount of data

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
3abe4adbfb batman-adv: refactor batadv_tt_local_event()
Instead of passing a generic combination of flags as
argument, it is easier to pass the entire tt_common
structure (containing the flags already set) plus a
bitfield of event flags that will be unified with
the already existing ones before inserting the client
in the event queue.
In this way invocations of the modified function can be
simplified.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
d989661732 batman-adv: move batadv_slide_own_bcast_window to bat_iv_ogm.c
batadv_slide_own_bcast_window() is used only in bat_iv_ogm.c
and it is currently touching only batman_iv specific
attributes.

Move it into bat_iv_ogm.c and make it static.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
24a5deeb8a batman-adv: move ring_buffer helper functions in bat_iv_ogm
the two lonely ring_buffer helper functions are used by the
bat_iv_ogm module only and therefore they can be moved
inside it.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
7ed4be9523 batman-adv: use eth_hdr() when it makes sense
Instead of casting the result of skb_mac_header() to
"struct ethhdr *" every time, the eth_hdr inline function
can be use to beautify the code and improve its readability.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
7db3fc291b batman-adv: don't initialise batman_iv private members in hard-interface.c
hard-interface.c has to do not contain any routing algorithm
specific code.

Allocate the hard-interface with kzalloc() and remove any
useless and algorithm specific member initialisation

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
38dc40ef52 batman-adv: do not silently ignore wrong condition
Only one neigh_node per orig_node should match a given
neighbor address, therefore, if more than one matching
neigh_node is found, a WARNING has to be triggered to let
the user know that something is wrong in the originator
state instead of silently skipping the error.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:54 +02:00
Antonio Quartulli
a3b81b67de batman-adv: don't check compat version twice
Compatibility version is checked upon packet reception
before calling any handler. For this reason it does need to
be checked once more in the handler itself.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:53 +02:00
Antonio Quartulli
281581d3e7 batman-adv: don't check the source address twice
The source address has already been checked in
batadv_check_management_packet() upon packet reception and
therefore it does not need to be checked again in
ogm_process()

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:53 +02:00
Antonio Quartulli
d1dc30739c batman-adv: slightly improve neighbor creation debug message
print the interface along with the new neighbor mac address

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:53 +02:00
Antonio Quartulli
863dd7a82a batman-adv: drop useless argument seqno in neighbor creation
the sequence number is not stored in struct neigh_node,
therefore there is no need to pass such value to the
neigh_node creation procedure.

At the moment the value is only used by a debug message, but
given the fact that the seqno is not related to the neighbor
object, it is better to print it elsewhere.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29 02:44:53 +02:00
Marek Lindner
93178018eb batman-adv: fix typos in kernel doc & comments
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:53 +02:00
Matthias Schiffer
caf65bfcc5 batman-adv: send each broadcast only once on non-wireless interfaces
While it makes sense to send each broadcast thrice on 802.11 (WLAN) interfaces
as broadcasts are often unreliable on these, there is no reason to do so on
other interface types.

The increased the overhead can be harmful on low-bandwidth links like VPN
connections over slow internet lines, therefore it is better to reduce the
number of broadcast packets sent on non-wireless links to one.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:53 +02:00
Matthias Schiffer
de68d1003d batman-adv: split batadv_is_wifi_iface() into two functions
Previously batadv_is_wifi_iface() did two things at once: looking up a
net_device from an interface index, and determining if it is a wifi device.

The second part is useful itself when the caller already has a net_device
reference.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29 02:44:53 +02:00
Jiri Pirko
351638e7de net: pass info struct via netdevice notifier
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 13:11:01 -07:00
Martin Hundebøll
f69ae770e7 batman-adv: Avoid double freeing of bat_counters
On errors in batadv_mesh_init(), bat_counters will be freed in both
batadv_mesh_free() and batadv_softif_init_late(). This patch fixes this
by returning earlier from batadv_softif_init_late() in case of errors in
batadv_mesh_init() and by setting bat_counters to NULL after freeing.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-21 21:34:36 +02:00
Linus Lüssing
72822225bd batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code
rcu_barrier() only waits for the currently scheduled rcu functions
to finish - it won't wait for any function scheduled via another
call_rcu() within an rcu scheduled function.

Unfortunately our batadv_tt_orig_list_entry_free_ref() does just that,
via a batadv_orig_node_free_ref() call, leading to our rcu_barrier()
call potentially missing such a batadv_orig_node_free_ref().

This patch fixes this issue by calling the batadv_orig_node_free_rcu()
directly from the rcu callback, removing the unnecessary, additional
call_rcu() layer here.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-05-17 09:54:28 +02:00
Antonio Quartulli
a436186035 batman-adv: reorder clean up routine in order to avoid race conditions
nc_worker accesses the originator table during its periodic
work, but since the originator table is freed before
stopping the worker this leads to a global protection fault.

Fix this by killing the worker (in nc_free) before freeing
the originator table.

Moreover tidy up the entire clean up routine by running all
the subcomponents freeing procedures first and then killing
the TT and the originator tables at the end.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-09 12:39:45 +02:00
Antonio Quartulli
88e48d7b33 batman-adv: make DAT drop ARP requests targeting local clients
In the outgoing ARP request snooping routine in DAT, ARP
Request sent by local clients which are supposed to be
replied by other local clients can be silently dropped.

The destination host will reply by itself through the LAN
and therefore there is no need to involve DAT.

Reported-by: Carlos Quijano <carlos@crqgestion.es>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Tested-by: Carlos Quijano <carlos@crqgestion.es>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-09 12:39:45 +02:00
Marek Lindner
7da19971a9 batman-adv: check return value of pskb_trim_rcsum()
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-09 12:39:44 +02:00
Marek Lindner
293c9c1cef batman-adv: check proto length before accessing proto string buffer
batadv_param_set_ra() strips the trailing '\n' from the supplied
string buffer without checking the length of the buffer first. This
patches avoids random memory access and associated potential
crashes.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-09 12:39:44 +02:00
David S. Miller
58717686cf Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
	drivers/net/ethernet/emulex/benet/be.h
	include/net/tcp.h
	net/mac802154/mac802154.h

Most conflicts were minor overlapping stuff.

The be2net driver brought in some fixes that added __vlan_put_tag
calls, which in net-next take an additional argument.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30 03:55:20 -04:00
Antonio Quartulli
0c501345ce batman-adv: fix global protection fault during soft_iface destruction
batadv_mesh_free() schedules some RCU callbacks which need the bat_priv struct
to do their jobs, while free_netdev(), which is called immediately after, is
destroying the private data.

Put an rcu_barrier() in the middle so that free_netdev() is invoked only after
all the callbacks returned.

This bug has been introduced by ab8f433dd39be94e8617cff2dfe9f7eca162eb15
("batman-adv: Move deinitialization of soft-interface to destructor")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22 20:40:48 -04:00
David S. Miller
6e0895c2ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	drivers/net/ethernet/intel/igb/igb_main.c
	drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
	include/net/scm.h
	net/batman-adv/routing.c
	net/ipv4/tcp_input.c

The e{uid,gid} --> {uid,gid} credentials fix conflicted with the
cleanup in net-next to now pass cred structs around.

The be2net driver had a bug fix in 'net' that overlapped with the VLAN
interface changes by Patrick McHardy in net-next.

An IGB conflict existed because in 'net' the build_skb() support was
reverted, and in 'net-next' there was a comment style fix within that
code.

Several batman-adv conflicts were resolved by making sure that all
calls to batadv_is_my_mac() are changed to have a new bat_priv first
argument.

Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO
rewrite in 'net-next', mostly overlapping changes.

Thanks to Stephen Rothwell and Antonio Quartulli for help with several
of these merge resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22 20:32:51 -04:00
Antonio Quartulli
dd981ab091 batman-adv: use the proper header len when checking the TTVN
Unicast packet might be of type either UNICAST or
UNICAST4ADDR.
In the two cases the header size is different, but the
mechanism checking the TTVN field was assuming it to be
always of the same type (UNICAST), so failing to access the
inner Ethernet header in case of UNICAST4ADDR.

Fix this by passing the real header length as argument.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-22 09:55:23 +02:00
Patrick McHardy
86a9bad3ab net: vlan: add protocol argument to packet tagging functions
Add a protocol argument to the VLAN packet tagging functions. In case of HW
tagging, we need that protocol available in the ndo_start_xmit functions,
so it is stored in a new field in the skb. The new field fits into a hole
(on 64 bit) and doesn't increase the sks's size.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:46:06 -04:00
Antonio Quartulli
fe8a93b951 batman-adv: make is_my_mac() check for the current mesh only
On a multi-mesh node (a node running more than one batman-adv
virtual interface) batadv_is_my_mac() has to check MAC
addresses of hard interfaces belonging to the current mesh
only.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-17 22:31:22 +02:00
Antonio Quartulli
0c81465357 batman-adv: use seq_puts instead of seq_printf when the format is constant
As reported by checkpatch, seq_puts has to be preferred with
respect to seq_printf when the format is a constant string
(no va_args)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27 10:29:55 +01:00
Antonio Quartulli
9cb812c54e batman-adv: update Makefile copyright years
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:29:54 +01:00
Simon Wunderlich
9998bb7300 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:29:54 +01:00
Antonio Quartulli
cb4b0d4864 batman-adv: free an hard-interface before adding it
When adding a new hard interface (e.g. wlan0) to a soft interface (e.g. bat0)
and the former is already enslaved in another virtual interface (e.g. a software
bridge) batman-adv has to free it first and then continue with the adding
mechanism.

In this way the behaviour becomes consistent with what "ip link set master"
does. At the moment batman-adv enslaves the hard interface without checking for
the master device, possibly causing strange behaviours which are never wanted by
the users.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27 10:29:53 +01:00
Sven Eckelmann
3dbd550b8b batman-adv: Allow to modify slaves of soft-interfaces through rntl_link
The sysfs configuration interface of batman-adv to add/remove slaves of an
soft-iface is not deadlock free and doesn't follow the currently common way to
modify slaves of an interface.

An additional configuration interface though rtnl_link is introduced which
provides easy device adding/removing with tools like "ip":
$ ip link set dev eth0 master bat0
$ ip link set dev eth0 nomaster

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:29:52 +01:00
Sven Eckelmann
a4ac28c0d0 batman-adv: Allow to use rntl_link for device creation/deletion
The sysfs configuration interface of batman-adv to add/remove soft-interfaces
is not deadlock free and doesn't follow the currently common way to create new
virtual interfaces.

An additional interface though rtnl_link is introduced which provides easy device
creation/deletion with tools like "ip":

$ ip link add dev bat0 type batadv
$ ip link del dev bat0

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:27:34 +01:00
Marek Lindner
e07932ae6f batman-adv: rename batadv_softif_destroy to reflect sysfs use case
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
CC: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:27:33 +01:00
Sven Eckelmann
a15fd3612d batman-adv: Don't always delete softif when last slave was removed
batman-adv has an unusual way to manage softinterfaces. These will be created
automatically when a user writes to the batman-adv/mesh_iface file in sysfs and
removed when no slave device exists anymore.

This behaviour cannot be changed without breaking compatibility with existing
code. Instead other interfaces should be able to slightly reduce this behaviour
and provide a more common reaction to a removal of a slave interface.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:27:32 +01:00
Sven Eckelmann
b3246020e2 batman-adv: Move deinitialization of soft-interface to destructor
The deinitialization of the soft-interface created in ndo_init/constructor
should be done in the destructor and not directly before calling
unregister_netdevice

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:27:32 +01:00
Sven Eckelmann
37130293fd batman-adv: Move soft-interface initialization to ndo_init
The initialization of an net_device object should be done in the
init/constructor function and not from the outside after the register_netdevice
was done to avoid race conditions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:27:31 +01:00
Martin Hundebøll
e6a0b495ff batman-adv: Fix endianness errors for network coding
Add a htonl() in network_coding.c when reading the sequence number
from received ogm_packet, to avoid wrong byte ordering when comparing
with a host value. This bug was introduced in
3ed7ada3f0bbcd058567bc0a8f9729a73eba7db6 ("batman-adv: network coding -
detect coding nodes and remove these after timeout").

Change the type of coded_packet->coded_len from uint16 to __be16 to
avoid wrong assumptions about endianness in later uses. Introduced in
c3289f3650d34b60296000a629c99f2488f7c3dd ("batman-adv: network coding -
code and transmit packets if possible").

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27 10:27:31 +01:00
Martin Hundebøll
2df5278b02 batman-adv: network coding - receive coded packets and decode them
When receiving a network coded packet, the decoding buffer is searched
for a packet to use for decoding. The source, destination, and crc32 from
the coded packet is used to identify the wanted packet. The decoded
packet is passed to the usual unicast receiver function, as had it never
been network coded.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:51 +01:00
Martin Hundebøll
612d2b4fe0 batman-adv: network coding - save overheard and tx packets for decoding
To be able to decode a network coded packet, a node must already know
one of the two coded packets. This is done by buffering skbs before
transmission and buffering packets sniffed with promiscuous mode from
other hosts.

Packets are kept in a buffer similar to the one with forward-skbs: A
hash table, where each entry, which corresponds to a src-dst pair, has a
linked list packets.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:50 +01:00
Martin Hundebøll
3c12de9a5c batman-adv: network coding - code and transmit packets if possible
Before adding forward-skbs to the coding buffer, the buffer is searched
for a potential coding opportunity. If one is found, the two packets are
network coded and transmitted right away. If not, the forward-skb is
added to the buffer.

Network coded packets are transmitted with information about the two
receivers and the two coded packets. The first receiver is given by the
MAC header, while the second is given in the payload/bat-header. The
second receiver uses promiscuous mode to receive the packet and check
the second destination.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:50 +01:00
Martin Hundebøll
953324776d batman-adv: network coding - buffer unicast packets before forward
Two be able to network code two packets, one packet must be buffered
until the next is available. This is done in a "coding buffer", which is
essentially a hash table with lists of packets. Each entry in the hash
table corresponds to a specific src-dst pair, which has a linked list of
packets that are buffered.

This patch adds skbs to the buffer just before forwarding them. The
buffer is traversed every 10 ms, where timed skbs are removed from the
buffer and transmitted. To allow experiments with the network coding
scheme, the timeout is tunable through a file in debugfs.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:49 +01:00
Martin Hundebøll
d56b1705e2 batman-adv: network coding - detect coding nodes and remove these after timeout
To use network coding efficiently, a relay must know when neighbor nodes
are likely to have enough information to be able to decode a network
coded packet. This is detected by using OGMs from batman-adv to discover
when one neighbor is in range of another neighbor. The relay check the
TLL to detect when an OGM is forwarded from one neighbor by another
neighbor, and thereby knows that the two neighbors are in range and thus
overhear packets sent by each other.

This information is saved in the orig_node struct to be used when
searching for coding opportunities. Two lists are added to the
orig_node struct: One for neighbors that can hear the orig_node
(outgoing nc_nodes) and one for neighbors that the orig_node can hear
(incoming nc_nodes).

Information about nc_nodes is kept for 10 seconds and is available
through debugfs in batman_adv/nc_nodes to use when debugging network
coding.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:49 +01:00
Martin Hundebøll
d353d8d4d9 batman-adv: network coding - add the initial infrastructure code
Network coding exploits the 802.11 shared medium to allow multiple
packets to be sent in a single transmission. In brief, a relay can XOR
two packets, and send the coded packet to two destinations. The
receivers can decode one of the original packets by XOR'ing the coded
packet with the other original packet. This will lead to increased
throughput in topologies where two packets cross one relay.

In a simple topology with three nodes, it takes four transmissions
without network coding to get one packet from Node A to Node B and one
from Node B to Node A:

 1.  Node A  ---- p1 --->  Node R                Node B
 2.  Node A                Node R  <--- p2 ----  Node B
 3.  Node A  <--- p2 ----  Node R                Node B
 4.  Node A                Node R  ---- p1 --->  Node B

With network coding, the relay only needs one transmission, which saves
us one slot of valuable airtime:

 1.  Node A  ---- p1 --->  Node R                Node B
 2.  Node A                Node R  <--- p2 ----  Node B
 3.  Node A  <- p1 x p2 -  Node R  - p1 x p2 ->  Node B

The same principle holds for a topology including five nodes. Here the
packets from Node A and Node B are overheard by Node C and Node D,
respectively. This allows Node R to send a network coded packet to save
one transmission:

   Node A                  Node B

    |     \              /    |
    |      p1          p2     |
    |       \          /      |
    p1       > Node R <       p2
    |                         |
    |         /      \        |
    |    p1 x p2    p1 x p2   |
    v       /          \      v
           /            \
   Node C <              > Node D

More information is available on the open-mesh.org wiki[1].

This patch adds the initial code to support network coding in
batman-adv. It sets up a worker thread to do house keeping and adds a
sysfs file to enable/disable network coding. The feature is disabled by
default, as it requires a wifi-driver with working promiscuous mode, and
also because it adds a small delay at each hop.

[1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:48 +01:00
Antonio Quartulli
c1d07431b9 batman-adv: don't use !! in bool conversion
In C standard any expression different from 0 will be converted to
'true' when casting to bool (whatever is the length of the value).
Therefore all the "!!" conversions can be removed.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-13 22:53:48 +01:00
Martin Hundebøll
f86ce0ad10 batman-adv: Return reason for failure in batadv_check_unicast_packet()
batadv_check_unicast_packet() is changed to return a value based on the
reason to drop the packet, which will be useful information for
future users of batadv_check_unicast_packet().

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:47 +01:00
Marek Lindner
736292c2e8 batman-adv: replace redundant primary_if_get calls
The batadv_priv struct carries a pointer to its own interface
struct. Therefore, it is not necessary to retrieve the soft_iface
via the primary interface.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13 22:53:47 +01:00
Marek Lindner
b47506d912 batman-adv: verify tt len does not exceed packet len
batadv_iv_ogm_process() accesses the packet using the tt_num_changes
attribute regardless of the real packet len (assuming the length check
was done before). Therefore a length check is needed to avoid reading
random memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-11 22:59:47 +01:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
David S. Miller
6338a53a2b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into net
Pull in 'net' to take in the bug fixes that didn't make it into
3.8-final.

Also, deal with the semantic conflict of the change made to
net/ipv6/xfrm6_policy.c   A missing rt6->n neighbour release
was added to 'net', but in 'net-next' we no longer cache the
neighbour entries in the ipv6 routes so that change is not
appropriate there.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18 23:34:21 -05:00
Pau Koning
816cd5b83e batman-adv: Fix NULL pointer dereference in DAT hash collision avoidance
An entry in DAT with the hashed position of 0 can cause a NULL pointer
dereference when the first entry is checked by batadv_choose_next_candidate.
This first candidate automatically has the max value of 0 and the max_orig_node
of NULL. Not checking max_orig_node for NULL in batadv_is_orig_node_eligible
will lead to a NULL pointer dereference when checking for the lowest address.

This problem was added in 785ea11441
("batman-adv: Distributed ARP Table - create DHT helper functions").

Signed-off-by: Pau Koning <paukoning@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 13:35:24 -05:00
David S. Miller
b53c47dd4f Included changes:
- fix recently introduced output behaviour
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRBtWEAAoJEADl0hg6qKeO5P0P/1SvRNUjavJkZp5G7Yb/HhEQ
 66rwst3tC6Bo0d7jpi0IX/EQd9KpQNPqmq/DzDiwPtNEYEA2obI8fKeUMvT6wXR+
 +tdviD0biz7tzKoy8kFlRv2eQEs7ibvjsmdOaqoiFzfBfdDJjxmME6iFuyyNbbU1
 3Yvb81lUpnT2+kw3vG5+yjvwlzrBal9Jwigeah3ok0TkzdvRmrU92TSt6KGhRvyx
 r6E2q8PA7pQvSPgRWjGW+8hye/6XzTsqe+zCT7yOe/LT+epMjn5rrgEzRdUvjzFS
 RGjAIMW82Cqn00h6PtacjOVecL3RjyfAmDamvPym8/6x2FxbfR00zkSPX/AX6F8T
 pxq4QhmMWP4YDYG8oHL1N2PUMqMODmhuDivrBfqTSpQO7h7KMZ0T4LHBXRoSuWSy
 W46/QuO/xazQzgoAZlO/CDM2ZNMAee6ol2wvN30uX9JmLb+12OTjD/7Isn4LP5oO
 rdJXhELwxd5oowo+NDXVIq0YmXjMNO9iukMhURBMNKXr/U+i0N9O124ba9p8ahFM
 voI19Iflhtl2nzMP4WsycNaaLVKVAalhV8hAu4y75aOA7Z6PwqcIHv4aSjOWwJmb
 2jhH+PKyvddyJaduWLCYcAqvDZ8Gj2fVl9yf9uFcWJKgO3BbrNN69eOdOtLoCHkO
 ixJSGwm8lvUnXc0jOThJ
 =os3V
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Included changes:
- fix recently introduced output behaviour

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29 15:59:45 -05:00
David S. Miller
f1e7b73acc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug
fixes that some net-next work will build upon.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29 15:32:13 -05:00
Antonio Quartulli
a7966d908a batman-adv: fix local translation table output
The last-seen field has to be printed for all the local
entries but the one marked with the no-purge flag

Introduced by 15727323d9f8864b2d41930940acc38de987045a
("batman-adv: don't print the last_seen time for bat0 TT local entry")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-28 20:46:03 +01:00
Matthias Schiffer
b618ad1103 batman-adv: filter ARP packets with invalid MAC addresses in DAT
We never want multicast MAC addresses in the Distributed ARP Table, so it's
best to completely ignore ARP packets containing them where we expect unicast
addresses.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-27 14:02:39 +01:00
Matthias Schiffer
757dd82ea7 batman-adv: check for more types of invalid IP addresses in DAT
There are more types of IP addresses that may appear in ARP packets that we
don't want to process. While some of these should never appear in sane ARP
packets, a 0.0.0.0 source is used for duplicate address detection and thus seen
quite often.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-27 14:02:39 +01:00
Matthias Schiffer
0d15becee5 batman-adv: fix skb leak in batadv_dat_snoop_incoming_arp_reply()
The callers of batadv_dat_snoop_incoming_arp_reply() assume the skb has been
freed when it returns true; fix this by calling kfree_skb before returning as
it is done in batadv_dat_snoop_incoming_arp_request().

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-27 14:02:39 +01:00
Antonio Quartulli
5ac2a17729 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:13 +08:00
Antonio Quartulli
0b87393146 batman-adv: update copyright years
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19 21:18:12 +08:00
Simon Wunderlich
5bc44dc845 batman-adv: postpone sysfs removal when unregistering
When processing the unregister notify for a hard interface, removing
the sysfs files may lead to a circular deadlock (rtnl mutex <->
s_active).

To overcome this problem, postpone the sysfs removal in a worker.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:12 +08:00
Akinobu Mita
e76e4320a2 batman-adv: rename random32() to prandom_u32()
Use more preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Antonio Quartulli <ordex@autistici.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:12 +08:00
Marek Lindner
88a32c9a8a batman-adv: kernel doc for types.h
Thanks to Sven Eckelmann and Simon Wunderlich for their support.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:11 +08:00
Marek Lindner
712bbfe46b batman-adv: rename batadv_claim struct to make clear it is used by bla
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:11 +08:00
Marek Lindner
bae9877471 batman-adv: rename batadv_backbone_gw struct to make clear it is used by bla
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:11 +08:00
Marek Lindner
28500f07ab batman-adv: rename batadv_recvlist_node struct to make clear it is used by vis
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:10 +08:00
Marek Lindner
015b4ae4a3 batman-adv: rename batadv_if_list_entry struct to make clear it is used by vis
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:10 +08:00
Marek Lindner
2006fea820 batman-adv: group tt type definitions together
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:10 +08:00
Marek Lindner
0abf5d8117 batman-adv: mark debug_log struct as bat_priv only struct
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:10 +08:00
Marek Lindner
b6d0ab7ca3 batman-adv: align kernel doc properly
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19 21:18:09 +08:00
Antonio Quartulli
7241444209 batman-adv: a delayed_work has to be initialised once
A delayed_work struct does not need to be initialized each
every time before being enqueued. Therefore the
INIT_DELAYED_WORK() macro should be used during the
initialization process only.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19 21:18:09 +08:00
Marek Lindner
0c430d0d7b batman-adv: unbloat batadv_priv if debug is not enabled
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-12 20:58:23 +10:00
Marek Lindner
9338026107 batman-adv: remove unused variable from orig_node struct
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-12 20:58:23 +10:00
Antonio Quartulli
c0275e243c batman-adv: fix typo in debug message
in bat_iv_ogm.c a debug message should print "tq" instead of "td"

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:23 +10:00
Antonio Quartulli
467b5fe697 batman-adv: use the const qualifier in hash functions
The data argument in each hash function should carry the
"const" qualifier as it is never modified.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:22 +10:00
Antonio Quartulli
fa706554d6 batman-adv: don't compile the BLA switch if not requested
When the Bridge Loop Avoidance component is not compiled-in, its boolean switch
should be not compiled as well. This patch surrounds the switch with a proper
ifdef.

This behaviour was introduced by 9fd6b0615b5499b270d39a92b8790e206cf75833
("batman-adv: add bridge loop avoidance compile option")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:22 +10:00
Antonio Quartulli
3f87c4239f batman-adv: remove useless NULL check
debugfs_remove_recursive() checks whether its argument is not null
on its own, therefore it is possible to remove the external check.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:22 +10:00
Antonio Quartulli
46d160ef88 batman-adv: remove useless blank lines before and after brackets
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:21 +10:00
Antonio Quartulli
dec05074b1 batman-adv: Initialize lockdep class keys for hashes
Different hashes have the same class key because they get
initialised with the same one. For this reason lockdep can create
false warning when they are used recursively.

Re-initialise the key for each hash after the invocation to hash_new()
to avoid this problem.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Tested-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:21 +10:00
Antonio Quartulli
8425ec6aea batman-adv: remove useless assignment in tt_local_add()
The flag field of the tt_local_entry->common structure in
tt_local_add() is first assigned NO_FLAGS and then TT_CLIENT_NEW so
nullifying the first operation. For this reason it is safe to remove
the first assignment.

This was introuduced by ("batman-adv: keep local table consistency for
further TT_RESPONSE")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:20 +10:00
Antonio Quartulli
39a3299158 batman-adv: unify and properly print hex values
Values are printed in hexadecimal format in several points in the
code, but they are not printed using the same format string.

This patches unifies the format used for such numbers so that they
look the same everywhere.

Given the fact that all the variables printed as hexadecimal are 16
bit long, this is the chosen printing format: %#.4x

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:20 +10:00
Antonio Quartulli
f9d8a53784 batman-adv: print the CRC together with the translation tables
To simplify debugging operations, it is better to print the related
CRC together with the translation table (local CRC for the local
table and global CRC for each entry in the global table)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:20 +10:00
Antonio Quartulli
85766a8200 batman-adv: improve local translation table output
This patch adds a nice header to the local translation table and
the last_seen time for each local entry

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:20 +10:00
Antonio Quartulli
7cf4d520fd batman-adv: reduce local TT entry timeout to 10 minutes
The current timeout is set to one hour. However a client connected to the mesh
network will always generate traffic. In the worst case it will send ARP
requests every 4 or 5 minutes. On the other hand having a long timeout means
storing dead entries for one hour and it leads to very big trans-tables
containing useless clients.

This patch reduces the timeout to 10 minutes

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12 20:58:19 +10:00
Linus Lüssing
02233e0c75 batman-adv: Do not add multicast MAC addresses to translation table
The current translation table mechanism is not suitable for multicast
addresses and we are currently flooding such frames anyway.

Therefore this patch prevents multicast MAC addresses being added to the
translation table.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-12 20:58:19 +10:00
Shan Wei
569174433d batman-adv: use per_cpu_add helper
this_cpu_add is an atomic operation.
and be more faster than per_cpu_ptr operation.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-12 20:58:19 +10:00
Jiri Pirko
7826d43f2d ethtool: fix drvinfo strings set in drivers
Use strlcpy where possible to ensure the string is \0 terminated.
Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN
and custom defines.
Use snprintf instead of sprint.
Remove unnecessary inits of ->fw_version
Remove unnecessary inits of drvinfo struct.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06 21:06:31 -08:00
Jiri Pirko
15c6ff3bc0 net: remove unnecessary NET_ADDR_RANDOM "bitclean"
NET_ADDR_SET is set in dev_set_mac_address() no need to alter
dev->addr_assign_type value in drivers.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03 22:37:36 -08:00
Akinobu Mita
143cdd8f33 batman-adv: fix random jitter calculation
batadv_iv_ogm_emit_send_time() attempts to calculates a random integer
in the range of 'orig_interval +- BATADV_JITTER' by the below lines.

        msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER;
        msecs += (random32() % 2 * BATADV_JITTER);

But it actually gets 'orig_interval' or 'orig_interval - BATADV_JITTER'
because '%' and '*' have same precedence and associativity is
left-to-right.

This adds the parentheses at the appropriate position so that it matches
original intension.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Antonio Quartulli <ordex@autistici.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26 14:13:23 -08:00
Antonio Quartulli
af5d4f7737 batman-adv: use ETH_P_BATMAN
The ETH_P_BATMAN ethertype is now defined kernel-wide. Use it instead
of the private BATADV_ETH_P_BATMAN define.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-30 10:50:22 +01:00
Sven Eckelmann
e022b956c1 batman-adv: Use packing of 2 for all headers before an ethernet header
All packet headers in front of an ethernet header have to be completely
divisible by 2 but not by 4 to make the payload after the ethernet header again
4 bytes boundary aligned.

A packing of 2 is necessary to avoid extra padding at the end of the struct
caused by a structure member which is larger than two bytes. Otherwise the
structure would not fulfill the previously mentioned rule to avoid the
misalignment of the payload after the ethernet header. It may also lead to
leakage of information when the padding it not initialized before sending.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:35:47 +01:00
Sven Eckelmann
d81f78ec37 batman-adv: Start new development cycle
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:35:46 +01:00
Simon Wunderlich
004e86fc58 batman-adv: Fix broadcast duplist for fragmentation
If the skb is fragmented, the checksum must be computed on the
individual fragments, just using skb->data may fail on fragmented
data. Instead of doing linearizing the packet, use the new
batadv_crc32 to do that more efficiently- it should not hurt
replacing the old crc16 by the new crc32.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:35:45 +01:00
Sven Eckelmann
95a066d82c batman-adv: Add function to calculate crc32c for the skb payload
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:35:41 +01:00
Martin Hundebøll
bb351ba0bb batman-adv: Add wrapper to look up neighbor and send skb
By adding batadv_send_skb_to_orig() in send.c, we can remove duplicate
code that looks up the next hop and then calls batadv_send_skb_packet().

Furthermore, this prepares the upcoming new implementation of
fragmentation, which requires the next hop to route packets.

Please note that this doesn't entirely remove the next-hop lookup in
routing.c and unicast.c, since it is used by the current fragmentation
code.

Also note that the next-hop info is removed from debug messages in
translation-table.c, since it is looked up elsewhere.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:34:50 +01:00
Antonio Quartulli
637fbd1294 batman-adv: support array of debugfs general attributes
This patch adds support for an array of debugfs general (not soft_iface
specific) attributes. With this change it will be possible to add more general
attributes by simply appending them to the array without touching the rest of
the code.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-21 12:34:49 +01:00
Simon Wunderlich
c76d15253a batman-adv: fix bla compare function
The address and the VLAN VID may not be packed in the respective
structs. Fix this by comparing the elements individually.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:34:48 +01:00
Sven Eckelmann
981d890029 batman-adv: Mark best gateway in transtable_global debugfs
The transtable_global debug file can show multiple entries for a single client
when multiple gateways exist. The chosen gateway isn't marked in the list and
therefore the user cannot easily debug the situation when there is a problem
with the currently used gateway.

The best gateway is now marked with "*" and secondary gateways are marked with
"+".

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21 12:34:48 +01:00
David S. Miller
67f4efdce7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor line offset auto-merges.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17 22:00:43 -05:00
Antonio Quartulli
74490f9691 batman-adv: process broadcast packets in BLA earlier
The logic in the BLA mechanism may decide to drop broadcast packets
because the node may still be in the setup phase. For this reason,
further broadcast processing like the early client detection mechanism
must be done only after the BLA check.

This patches moves the invocation to BLA before any other broadcast
processing.

This was introduced 30cfd02b60
("batman-adv: detect not yet announced clients")

Reported-by: Glen Page <glen.page@thet.net>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16 09:36:54 +01:00
Antonio Quartulli
1f36aebcc5 batman-adv: don't add TEMP clients belonging to other backbone nodes
The "early client detection" mechanism must not add clients belonging
to other backbone nodes. Such clients must be reached by directly
using the LAN instead of the mesh.

This was introduced by 30cfd02b60
("batman-adv: detect not yet announced clients")

Reported-by: Glen Page <glen.page@thet.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16 09:36:43 +01:00
Antonio Quartulli
27b37ebfa2 batman-adv: correctly pass the client flag on tt_response
When a TT response with the full table is sent, the client flags
should be sent as well. This patch fix the flags assignment when
populating the tt_response to send back

This was introduced by 30cfd02b60
("batman-adv: detect not yet announced clients")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16 09:36:27 +01:00
Antonio Quartulli
e9c00136a4 batman-adv: fix tt_global_entries flags update
Flags carried by a change_entry have to be always copied into the
client entry as they may contain important attributes (e.g.
TT_CLIENT_WIFI).

For instance, a client added by means of the "early detection
mechanism" has no flag set at the beginning, so they must be updated once the
proper ADD event is received.

This was introduced by 30cfd02b60
("batman-adv: detect not yet announced clients")

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-16 09:28:03 +01:00
Sven Eckelmann
170173bf37 batman-adv: Remove instant overwritten variable initialization
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:37 +01:00
Antonio Quartulli
068ee6e204 batman-adv: roaming handling mechanism redesign
This patch allows clients to roam multiple times within the same
originator-interval.

To enable this new feature two key aspects that have been introduced:
1) packets are always directed to the node that was originally
serving the roamed client which will then re-route the data
to the correct destination at any point in time;
2) the client flags handling mechanism has been properly modified
in order to allow multiple roamings withinin the same orig-int.
Therefore flags are now set properly even in this scenario.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:37 +01:00
Antonio Quartulli
be73b488d1 batman-adv: refactor tt_global_del_struct()
batadv_tt_global_del_struct() function is not properly named.
Having a more meaningful name which reflects the current behavior helps other
developers to easily understand what it does.

A parameter has also been renamed in order to let the function header better fit
the 80-chars line-width

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:36 +01:00
Antonio Quartulli
47c94655c3 batman-adv: refactor code to simplify long lines
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:36 +01:00
Antonio Quartulli
7c1fd91da5 batman-adv: substitute tt_poss_change with a per-tt_entry flag
tt_poss_change is a node-wide flag which tells whether the node is in a roaming
state (a client recently moved to/away from it) in order to let it apply special
re-routing rules. However this flag does not give a clear idea of the current
state because it is not possible to understand *which client* is actually
involved in the roaming. For this reason a better approach has been chosen:
instead of using a node-wide variable, the roaming state is now given by a
per-tt_entry ROAM flag which, in case of packet coming through the node, tells
the node whether the real destination is in roaming state or not.

With this flag change, batadv_check_unicast_ttvn() has also been rearranged in
order to better fit the new re-routing logic and to be much more readable.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:35 +01:00
Simon Wunderlich
28709878b6 batman-adv: wait multiple periods before activating bla
For some reasons (bridge forward delay, network device setup order, etc)
the initial bridge loop avoidance announcement packets may be lost. This
may lead to problems in finding other backbone gws, and therfore create
loops in the startup time.

Fix this by extending the waiting periods to 3 (define can be changed)
before allowing broadcast traffic.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:35 +01:00
Simon Wunderlich
d807f27287 batman-adv: allow bla traffic only after first worker period
When adding a backbone gateway for the first time, it might not yet
be known in the backbone, and therefore we should not forward
broadcasts yet. This behaviour is the same as when sending a request
to another backbone gw because of a CRC mismatch. The backbone gw
will operate normal after the next periodic bla work.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:34 +01:00
Simon Wunderlich
52aebd6a9f batman-adv: send announcement when backbone gw is registered
To avoid loops in the startup phase until the first announcement is
sent, send an announcement immediately as soon as a backbone gw is
added.

This may happen due to various reasons, e.g. a packet passes the rx
or tx path.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:33 +01:00
Antonio Quartulli
b7eddd0b39 batman-adv: prevent using any virtual device created on batman-adv as hard-interface
Any virtual device created on top of a batman-adv mesh interface must be
prevented to be used to create a new mesh network (this would lead to an
unwanted batman-over-batman configuration)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:33 +01:00
Antonio Quartulli
a7528f8ddd batman-adv: fix wrong spinlock inline comment
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:32 +01:00
Simon Wunderlich
07568d0369 batman-adv: don't rely on positions in struct for hashing
The hash functions in the bridge loop avoidance code expects the
VLAN vid to be right after the mac address, but this is not guaranteed.

Fix this by explicitly hashing over the right fields of the struct.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14 21:00:32 +01:00
Antonio Quartulli
9affec6be8 batman-adv: enable fast client detection using unicast_4addr packets
The "early client detection mechanism" can be extended to find new clients by
means of unicast_4addr packets.

The unicast_4addr packet contains as well as the broadcast packet (which is
currently used in this mechanism) the address of the originating node and can
therefore be used to install new entries in the Global Translation Table

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-07 20:00:24 +01:00
Martin Hundebøll
4046b24afa batman-adv: Add get_ethtool_stats() support for DAT
Added additional counters for D.A.T.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:23 +01:00
Antonio Quartulli
33af49ad8a batman-adv: Distributed ARP Table - add runtime switch
This patch adds a runtime switch that enables the user to turn the DAT feature
on or off at runtime

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:22 +01:00
Antonio Quartulli
1722447482 batman-adv: Distributed ARP Table - add compile option
This patch makes it possible to decide whether to include DAT within the
batman-adv binary or not.
It is extremely useful when the user wants to reduce the size of the resulting
module by cutting off any not needed feature.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:22 +01:00
Antonio Quartulli
c384ea3ec9 batman-adv: Distributed ARP Table - add snooping functions for ARP messages
In case of an ARP message going in or out the soft_iface, it is intercepted and
a special action is performed. In particular the DHT helper functions previously
implemented are used to store all the ARP entries belonging to the network in
order to provide a fast and unicast lookup instead of the classic broadcast
flooding mechanism.
Each node stores the entries it is responsible for (following the DHT rules) in
its soft_iface ARP table. This makes it possible to reuse the kernel data
structures and functions for ARP management.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:21 +01:00
Antonio Quartulli
5c3a0e5535 batman-adv: Distributed ARP Table - add ARP parsing functions
ARP messages are now parsed to make it possible to trigger special actions
depending on their types (snooping).

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:20 +01:00
Antonio Quartulli
2f1dfbe185 batman-adv: Distributed ARP Table - implement local storage
Since batman-adv cannot inter-operate with the host ARP table, this patch
introduces a batman-adv private storage for ARP entries exchanged within DAT.
This storage will represent the node local cache in the DAT protocol.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:20 +01:00
Antonio Quartulli
785ea11441 batman-adv: Distributed ARP Table - create DHT helper functions
Add all the relevant functions in order to manage a Distributed Hash Table over
the B.A.T.M.A.N.-adv network. It will later be used to store several ARP entries
and implement DAT (Distributed ARP Table)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:19 +01:00
Antonio Quartulli
0e861a3c4f batman-adv: Distributed ARP Table - add a new debug log level
A new log level has been added to concentrate messages regarding DAT: ARP
snooping, requests, response and DHT related messages.
The new log level is named BATADV_DBG_DAT

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:18 +01:00
Antonio Quartulli
7cdcf6dddc batman-adv: add UNICAST_4ADDR packet type
The current unicast packet type does not contain the orig source address. This
patches add a new unicast packet (called UNICAST_4ADDR) which provides two new
fields: the originator source address and the subtype (the type of the data
contained in the packet payload). The former is useful to identify the node
which injected the packet into the network and the latter is useful to avoid
creating new unicast packet types in the future: a macro defining a new subtype
will be enough.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:18 +01:00
Sven Eckelmann
f6c57a4609 batman-adv: Mark correctly aligned headers not as __packed
Headers which are already perfectly aligned and create a 4 byte boundary
non-ethernet header payload can have the __packed attribute removed. The
__packed attribute doesn't change the appeareance of the packet for these
headers because no extra padding is necessary to align the data members. The
compiler will also create slightly faster code for loads of multi-byte members.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:17 +01:00
Sven Eckelmann
5b24657443 batman-adv: Reserve extra bytes in skb for better alignment
The ethernet header is 14 bytes long. Therefore, the data after it is not 4
byte aligned and may cause problems on systems without unaligned data access.
Reserving NET_IP_ALIGN more byes can fix the misalignment of the ethernet
header.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:16 +01:00
Antonio Quartulli
0aca86cd92 batman-adv: add kernel-doc for enum batadv_dbg_level
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:51 +01:00
Antonio Quartulli
7f91d06c90 batman-adv: pass the WIFI flag from the local to global entry
in case of client roaming a new global entry is added while a corresponding
local one is still present. In this case the node can safely pass the WIFI flag
from the local to the global entry.

This change is required to let the AP-isolation correctly working in case of
roaming: if a generic WIFI client C roams from node A to B, A adds a global
entry for C without adding any WIFI flag. The latter will be set only later,
once A has received C's advertisement from B. In this time period the
AP-Isolation (if enabled) would not correctly work since C is not marked as
WIFI, so allowing it to communicate with other WIFI clients.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:49 +01:00
Antonio Quartulli
9f9ff08d26 batman-adv: properly convert flag into a boolean value
In order to properly convert a bitwise AND to a boolean value, the whole
expression must be prepended by "!!".

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:47 +01:00
Antonio Quartulli
b8fcfa42e4 batman-adv: check for more space before accessing the skb
In batadv_check_unicast_ttvn() the code accesses both the unicast header and the
Ethernet header in the payload. For this reason pskb_may_pull() must be invoked
to check for the required space.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:45 +01:00
Antonio Quartulli
60c39c7584 batman-adv: print packets re-routing on DBG_TT and ratelimit it
To simplify TranslationTable debugging it is better to print the packet
rerouting message on the DBG_TT log level. In this way a developer interested in
packets rerouting doesn't need to filter it out of the whole ROUTES log.

Moreover, since this message will appear for each rerouted message, it is now
"ratelimited".

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:43 +01:00
Antonio Quartulli
fdf7932052 batman-adv: properly store the roaming time
in case of a new global entry added because of roaming, the roam_at field must
be properly initiated with the current time. This value will be later use to
purge this entry out on time out (if nobody claims it). Instead roam_at field
is now set to zero in this situation leading to an immediate purging of the
related entry.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:41 +01:00
Simon Wunderlich
4934ab951b batman-adv: don't allow ECTP traffic on batman-adv
We have seen this to break networks when used with bridge loop
avoidance. As we can't see any benefit from sending these ancient frames
via our mesh, we just drop them.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:40 +01:00
Sven Eckelmann
fe3f4cfe8e batman-adv: Only increase refcounter once for alternate router
The test whether we can use a router for alternating bonding should only be
done once because it is already known that it is still usable and will not be
deleted from the list soon.

This patch addresses Coverity #712285: Unchecked return value

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:38 +01:00
Sven Eckelmann
bd5b80d51a batman-adv: Check return value of try_module_get
New operations should not be started when they need an increased module
reference counter and try_module_get failed.

This patch addresses Coverity #712284: Unchecked return value

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:36 +01:00
Sven Eckelmann
8e7c15d6b5 batman-adv: Remove extra check in batadv_bit_get_packet
batadv_bit_get_packet checks for all common situations before it decides that
the new received packet indicates that the host was restarted. This extra
condition check at the end of the function is not necessary because this
condition is always true.

This patch addresses Coverity #712296: Logically dead code

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:34 +01:00
Sven Eckelmann
36c1d15311 batman-adv: Set special lockdep classes to avoid lockdep warning
Transmissions over batman-adv devices always start another nested transmission
over devices attached to the batman-adv interface. These devices usually use
the ethernet lockdep class for the tx_queue lock which is also set by default
for all batman-adv devices. Lockdep will detect a nested locking attempt of two
locks with the same class and warn about a possible deadlock.

This is the default and expected behavior and should not alarm the locking
correctness prove mechanism. Therefore, the locks for all netdevice specific tx
queues get a special batman-adv lock class to avoid a false positive for each
transmission.

Reported-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:32 +01:00
Antonio Quartulli
c10dba051a batman-adv: return proper value in case of hash_add failure
In case of hash_add failure tt_global_add() must return 0 (which means on entry
insertion).

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:31 +01:00
Marek Lindner
30da63a6af batman-adv: consolidate duplicated primary_if checking code
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:29 +01:00
Sven Eckelmann
f03a13a716 batman-adv: Remove unused define BAT_ATTR_HIF_UINT
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29 09:42:21 +01:00