Commit Graph

306 Commits

Author SHA1 Message Date
Jernej Skrabec
48f68de00c clk: sunxi-ng: Make sure divider tables have sentinel
Two clock divider tables are missing sentinel at the end. Effect of that
is that clock framework reads past the last entry. Fix that with adding
sentinel at the end.

Issue was discovered with KASan.

Fixes: 0577e4853b ("clk: sunxi-ng: Add H3 clocks")
Fixes: c6a0637460 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20201202203817.438713-1-jernej.skrabec@siol.net
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19 15:54:02 -08:00
Jernej Skrabec
a3ba99a24b
clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL
Audio cores need specific clock rates which can't be simply obtained by
adjusting integer multipliers and dividers. HW for such cases supports
delta-sigma modulation which enables fractional multipliers.

Port H3 delta-sigma table to R40. They have identical audio PLLs.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200825131049.1277596-1-jernej.skrabec@siol.net
2020-08-25 16:42:55 +02:00
Yangtao Li
fb038ce4db
clk: sunxi-ng: add support for the Allwinner A100 CCU
Add support for a100 in the sunxi-ng CCU framework.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1eb41bf6c966a0e54820200650d27a5d4f2ac160.1595572867.git.frank@allwinnertech.com
2020-08-25 10:52:18 +02:00
Jernej Skrabec
b998b75f86
clk: sunxi-ng: sun8i-de2: Sort structures
V3s quirks are not in right place. Move it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:01:16 +01:00
Jernej Skrabec
11d0c436ff
clk: sunxi-ng: sun8i-de2: Add R40 specific quirks
R40 is actually very similar to A64, but it doesn't have mixer1 reset.
This means it's clocks and resets combination is unique and R40 specific
quirks are needed.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:01:11 +01:00
Jernej Skrabec
b0bfba905c
clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T
A83T structures don't have clocks and reset for rotation core. Add them.

Fixes: 763c5bd045 ("clk: sunxi-ng: add support for DE2 CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:01:07 +01:00
Jernej Skrabec
8f9b11a33a
clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets
Currently, V3s and H3 reuse A83T reset structure. However, A83T contains
additional core for rotation, which is not present in V3s and H3.

Make new reset structure for H3 and let V3s reuse it. A83T reset
structure will be amended in subsequent commit.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:01:04 +01:00
Jernej Skrabec
75250eb75c
clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core
DE3 documentation regarding presence of rotate core in H6 is a bit
confusing. Register descriptions mention bits for enabling rotate core
clocks and reset, but general overview doesn't list it as feature of H6
display engine, BSP kernel doesn't support it and there is no interrupt
listed for it. Manual poking registers also didn't reveal presence of
rotate core.

Let's assume there isn't any rotate core on H6 present and remove
related clocks. With that done, structures are same as those for H5, so
just reuse H5 structure.

Fixes: 56808da9f9 ("clk: sunxi-ng: Add support for H6 DE3 clocks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:01:02 +01:00
Jernej Skrabec
b4bbce660a
clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64
A64 has rotation core which needs clocks and reset. Because there is no
appropriate structures available, make a separate, A64 specific
structures.

Fixes: cf4881c129 ("clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:01:00 +01:00
Jernej Skrabec
2b48dcb7a8
clk: sunxi-ng: sun8i-de2: Split out H5 definitions
H5 has less clocks and resets than A64. Currently that's not obvious
because A64 is missing rotation core related clocks and reset.

Split out H5 definition. A64 structures will be fixed in subsequent
commit.

Note that this patch depends on commit 19368d9974 ("clk: sunxi-ng:
add support for Allwinner H3 DE2 CCU") for the H3 clock list.

Fixes: 763c5bd045 ("clk: sunxi-ng: add support for DE2 CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-12 19:00:58 +01:00
Jernej Skrabec
1de8493069
clk: sunxi-ng: a64: Export MBUS clock
MBUS clock will be referenced in MBUS controller node.

Export it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-11 07:49:14 +01:00
Linus Torvalds
f4a6365ae8 There are a few changes to the core framework this time around, in addition to
the normal collection of driver updates to support new SoCs, fix incorrect
 data, and convert various drivers to clk_hw based APIs.
 
 In the core, we allow clk_ops::init() to return an error code now so that we
 can fail clk registration if the callback does something like fail to allocate
 memory. We also add a new "terminate" clk_op so that things done in
 clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now
 when critical clks fail to enable and we support changing clk rates and
 enable/disable state through debugfs when developers compile the kernel
 themselves.
 
 On the driver front, we get support for what seems like a lot of Qualcomm and
 NXP SoCs given that those vendors dominate the diffstat. There are a couple new
 drivers for Xilinx and Amlogic SoCs too. The updates are all small things like
 fixing the way glitch free muxes switch parents, avoiding div-by-zero problems,
 or fixing data like parent names. See the updates section below for more
 details.
 
 Finally, the "basic" clk types have been converted to support specifying
 parents with clk_hw pointers. This work includes an overhaul of the fixed-rate
 clk type to be more modern by using clk_hw APIs.
 
 Core:
  - Let clk_ops::init() return an error code
  - Add a clk_ops::terminate() callback to undo clk_ops::init()
  - Warn about critical clks that fail to enable or prepare
  - Support dangerous debugfs actions on clks with dead code
 
 New Drivers:
  - Support for Xilinx Versal platform clks
  - Display clk controller on qcom sc7180
  - Video clk controller on qcom sc7180
  - Graphics clk controller on qcom sc7180
  - CPU PLLs for qcom msm8916
  - Move qcom msm8974 gfx3d clk to RPM control
  - Display port clk support on qcom sdm845 SoCs
  - Global clk controller on qcom ipq6018
  - Add a driver for BCLK of Freescale SAI cores
  - Add cam, vpe and sgx clock support for TI dra7
  - Add aess clock support for TI omap5
  - Enable clks for CPUfreq on Allwinner A64 SoCs
  - Add Amlogic meson8b DDR clock controller
  - Add input clocks to Amlogic meson8b controllers
  - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
  - i.MX8MP clk driver support
 
 Updates:
  - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
  - Detect more PRMCU variants in ux500 driver
  - Adjust the composite clk type to new way of describing clk parents
  - Fixes for clk controllers on qcom msm8998 SoCs
  - Fix gmac main clock for TI dra7
  - Move TI dra7-atl clock header to correct location
  - Fix hidden node name dependency on TI clkctrl clocks
  - Fix Amlogic meson8b mali clock update using the glitch free mux
  - Fix Amlogic pll driver division by zero at init
  - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols
  - Switch more i.MX clk drivers to clk_hw based APIs
  - Disable non-functional divider between pll4_audio_div and
    pll4_post_div on imx6q
  - Fix watchdog2 clock name typo in imx7ulp clock driver
  - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs
  - Suppress bind attrs for i.MX8M clock driver
  - Add a big comment in imx8qxp-lpcg driver to tell why
    devm_platform_ioremap_resource() shouldn't be used for the driver
  - A correction on i.MX8MN usb1_ctrl parent clock setting
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl44cXMRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVK5RAA2RUSUv8VI8Yg5ppZjJsQaVfTFBe6/djt
 fToQ81J2vDorCGAhJQmPPBob8Ylxbw903k7480LYHxe3jghf9rA9NtiTEF/1F/YJ
 6EebFMSppRo+UeUAHUp78VQmMS3xgVDyod9nfHacMKd1wM2GCPFW+Nlz/uc/Y6tC
 CEkeVIyRejatX0ZkNK8IhtQF5VGNXh//9DfWwPORJsJrXpJPLJLVkPC5xqfJaBTZ
 uh/y7VJnYvJ6Yw5fm5mhzGvwjevuR2jpej+pHnCVvTAn4reg5tXH982T/u5rf71T
 I+6QDpclCNRduz3HeYcLygDa5vSYlT/7A2eucAB+OURGFjN7dpaDf3nUgxwZOgv/
 LSV4g83rAob3mRofLKSfTwh2B/cBl9YKvMrZljnABg1RpFl03PUEZx437hPyT0vP
 S3uXdrH1yQpY/GZ94G2nBaV7AYzEYp5DJD72bWVNlAhhScIdblc5ANUQya7dHQdp
 EWMecfqt8PnBwj2WqHUXlz9uFdLQVughyp7bxUtJeD1+x91a05+sk2guntA4Ao6S
 Xn7eBIElbAIgMVUmVroKGEtJoA2JTDzQj4xQ337lp9MKOGAuytf6HHja/lBSanbu
 xB4gjrTuFHIHOPiiYpuG3UIX+NVwQzCfRvUZqcv0mUCTGwLrs620wMrzadUGMmIF
 +ajwSdMmS2o=
 =UjXu
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "There are a few changes to the core framework this time around, in
  addition to the normal collection of driver updates to support new
  SoCs, fix incorrect data, and convert various drivers to clk_hw based
  APIs.

  In the core, we allow clk_ops::init() to return an error code now so
  that we can fail clk registration if the callback does something like
  fail to allocate memory. We also add a new "terminate" clk_op so that
  things done in clk_ops::init() can be undone, e.g. free memory. We
  also spit out a warning now when critical clks fail to enable and we
  support changing clk rates and enable/disable state through debugfs
  when developers compile the kernel themselves.

  On the driver front, we get support for what seems like a lot of
  Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
  There are a couple new drivers for Xilinx and Amlogic SoCs too. The
  updates are all small things like fixing the way glitch free muxes
  switch parents, avoiding div-by-zero problems, or fixing data like
  parent names. See the updates section below for more details.

  Finally, the "basic" clk types have been converted to support
  specifying parents with clk_hw pointers. This work includes an
  overhaul of the fixed-rate clk type to be more modern by using clk_hw
  APIs.

  Core:
   - Let clk_ops::init() return an error code
   - Add a clk_ops::terminate() callback to undo clk_ops::init()
   - Warn about critical clks that fail to enable or prepare
   - Support dangerous debugfs actions on clks with dead code

  New Drivers:
   - Support for Xilinx Versal platform clks
   - Display clk controller on qcom sc7180
   - Video clk controller on qcom sc7180
   - Graphics clk controller on qcom sc7180
   - CPU PLLs for qcom msm8916
   - Move qcom msm8974 gfx3d clk to RPM control
   - Display port clk support on qcom sdm845 SoCs
   - Global clk controller on qcom ipq6018
   - Add a driver for BCLK of Freescale SAI cores
   - Add cam, vpe and sgx clock support for TI dra7
   - Add aess clock support for TI omap5
   - Enable clks for CPUfreq on Allwinner A64 SoCs
   - Add Amlogic meson8b DDR clock controller
   - Add input clocks to Amlogic meson8b controllers
   - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
   - i.MX8MP clk driver support

  Updates:
   - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
     based APIs
   - Detect more PRMCU variants in ux500 driver
   - Adjust the composite clk type to new way of describing clk parents
   - Fixes for clk controllers on qcom msm8998 SoCs
   - Fix gmac main clock for TI dra7
   - Move TI dra7-atl clock header to correct location
   - Fix hidden node name dependency on TI clkctrl clocks
   - Fix Amlogic meson8b mali clock update using the glitch free mux
   - Fix Amlogic pll driver division by zero at init
   - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
     symbols
   - Switch more i.MX clk drivers to clk_hw based APIs
   - Disable non-functional divider between pll4_audio_div and
     pll4_post_div on imx6q
   - Fix watchdog2 clock name typo in imx7ulp clock driver
   - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
     SoCs
   - Suppress bind attrs for i.MX8M clock driver
   - Add a big comment in imx8qxp-lpcg driver to tell why
     devm_platform_ioremap_resource() shouldn't be used for the driver
   - A correction on i.MX8MN usb1_ctrl parent clock setting"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
  dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
  clk: ls1028a: Fix warning on clamp() usage
  clk: qoriq: add ls1088a hwaccel clocks support
  clk: ls1028a: Add clock driver for Display output interface
  dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
  clk: fsl-sai: new driver
  dt-bindings: clock: document the fsl-sai driver
  clk: composite: add _register_composite_pdata() variants
  clk: qcom: rpmh: Sort OF match table
  dt-bindings: fix warnings in validation of qcom,gcc.yaml
  dt-binding: fix compilation error of the example in qcom,gcc.yaml
  clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
  clk: zynqmp: Fix divider calculation
  clk: zynqmp: Add support for get max divider
  clk: zynqmp: Warn user if clock user are more than allowed
  clk: zynqmp: Extend driver for versal
  dt-bindings: clock: Add bindings for versal clock driver
  clk: ti: clkctrl: Fix hidden dependency to node name
  clk: ti: add clkctrl data dra7 sgx
  clk: ti: omap5: Add missing AESS clock
  ...
2020-02-03 22:10:18 +00:00
Maxime Ripard
9c232d324b
clk: sunxi: a23/a33: Export the MIPI PLL
The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings
headers.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04 09:45:19 +01:00
Maxime Ripard
a655ede064
clk: sunxi: a31: Export the MIPI PLL
The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings
headers.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04 09:45:09 +01:00
Vasily Khoruzhick
a9b5c67178
clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS
Export CLK_CPUX so we can reference it in CPU node.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04 09:18:08 +01:00
Icenowy Zheng
ec97faff74
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
The A64 PLL_CPU clock has the same instability if some factor changed
without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the
problem.

Fixes: c6a0637460 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-04 09:17:06 +01:00
Chen-Yu Tsai
b406cadbc8
clk: sunxi-ng: r40: Export MBUS clock
The MBUS clock needs to be referenced in the MBUS device node.
Export it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-03 10:37:14 +01:00
Samuel Holland
0c545240ae
clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order
According to the BSP source code, both the AR100 and R_APB2 clocks have
PLL_PERIPH0 as mux index 3, not 2 as it was on previous chips. The pre-
divider used for PLL_PERIPH0 should be changed to index 3 to match.

This was verified by running a rough benchmark on the AR100 with various
clock settings:

        | mux | pre-divider | iterations/second | clock source |
        |=====|=============|===================|==============|
        |   0 |           0 |  19033   (stable) |       osc24M |
        |   2 |           5 |  11466 (unstable) |  iosc/osc16M |
        |   2 |          17 |  11422 (unstable) |  iosc/osc16M |
        |   3 |           5 |  85338   (stable) |  pll-periph0 |
        |   3 |          17 |  27167   (stable) |  pll-periph0 |

The relative performance numbers all match up (with pll-periph0 running
at its default 600MHz).

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02 10:28:47 +01:00
Samuel Holland
675a6d467b
clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition
Like the APB0 clock on previous chips, this is a simple single-parent
clock with an M divider. Use the equivalent helper macro instead of
writing out the whole clock description manually.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02 10:27:56 +01:00
Samuel Holland
47d64fef1f
clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock
According to the BSP source code, the APB0 clock on the H3 and H5 has a
normal M divider, not a power-of-two divider. This matches the hardware
in the A83T (as described in both the BSP source code and the manual).
Since the A83T and H3/A64 clocks are actually the same, we can merge the
definitions.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-01-02 10:27:47 +01:00
Chen-Yu Tsai
c7b305267e
clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs
One of the uses of the external clock outputs is to provide a stable
32768 Hz clock signal to WiFi and Bluetooth chips. On the R40, the RTC
has an internal RC oscillator that is muxed with the external crystal.

Allow setting the parent rate for the external clock outputs so that
requests for 32768 Hz get passed to the RTC's clock driver to mux in
the external crystal if it isn't already muxed correctly.

Fixes: cd030a78f7 ("clk: sunxi-ng: support R40 SoC")
Fixes: 01a7ea763f ("clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output")
Cc: <stable@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-18 23:06:51 +01:00
Yunhao Tian
4ff40d140e
clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
The hws field of sun8i_v3s_hw_clks has only 74
members. However, the number specified by CLK_NUMBER
is 77 (= CLK_I2S0 + 1). This leads to runtime segmentation
fault that is not always reproducible.

This patch fixes the problem by specifying correct clock number.

Signed-off-by: Yunhao Tian <18373444@buaa.edu.cn>
[Maxime: Also remove the CLK_NUMBER definition]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-09 08:49:31 +01:00
Linus Torvalds
ddebe839c6 This merge window we have one small clk provider API in the core framework and
then a bunch of driver updates and a handful of new drivers. In terms of
 diffstat the Qualcomm and Amlogic drivers are high up there because of all the
 clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work
 done this cycle too to support suspend/resume and memory controllers. And the
 OMAP clk driver got proper clk and reset handling in place.
 
 Rounding out the patches are various updates to remove unused data, mark things
 static, correct incorrect data in drivers, etc. All the little things that
 improve drivers and maintain code health. I will point out that there's a patch
 in here for the GPIO clk driver, that almost nobody uses, which changes
 behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent.
 Other than that things are fairly well SoC specific here.
 
 Core:
  - Add a clk provider API to get current parent index
  - Plug a memory leak in clk_unregister() path
 
 New Drivers:
  - CGU in Ingenix X1000
  - Bitmain BM1880 clks
  - Qualcomm MSM8998 GPU clk controllers
  - Qualcomm SC7180 GCC and RPMH clk controllers
  - Qualcomm QCS404 Q6SSTOP clk controllers
  - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
  - Add support for the Renesas RZ/G2N (r8a774b1) SoC
  - Add Tegra20/30 External Memory Clock (EMC) support
 
 Updates:
  - Make gpio gate clks propagate rate setting up to parent
  - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority
  - Drop unused variables, enums, etc. in various clk drivers
  - Convert various drivers to use devm_platform_ioremap_resource()
  - Use struct_size() some more in various clk drivers
  - Improve Rockchip px30 clk tree
  - Add suspend/resume support to Tegra210 clk driver
  - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
  - Allwinner DT exports and H6 clk tree fixes
  - Proper clk and reset handling for OMAP SoCs
  - Revamped TI divider clk to clamp max divider
  - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs
  - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
  - Add VIDEO2_PLL clock for imx8mq
  - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
  - Add sm1 support in the Amlogic audio clock controller
  - Switch some clocks on R-Car Gen2/3 to .determine_rate()
  - Remove Renesas R-Car Gen2 legacy DT clock support
  - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
  - Improve Renesas R-Car Gen3 SD clock handling
  - Add rate table for Samsung exynos542x GPU and VPLL clks
  - Fix potential CPU performance degradation after system suspend/resume cycle
    on exynos542x SoCs
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl3e6rMRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtWQ//a3epm5t5lQHZjhDJFLYXqavzkGTLcDnF
 2+HWNwxLGatvmFqvLAxpB9QlFUntLOdQwjsI47UGKLVNwtXzqafl2yQGrMNYsdR+
 6ka0zkytPRuRr+C6cUYUxaoLviDMKi/PXrluOawXbdQ1ZL/5TgURkmEgGglp4Mti
 QHp2HO7uSk9pYA8T3TUK+hd9cqLXqW4xMn8MohuWfF3JxoquixOg+N7pE/OeGUyW
 NueWWvwKJ86Gtx+OxY8bW3afAzstUynxCUDLC/t7a5y52jxGCwuhHTC/pNcDgYFC
 z1H0rnoKG3pE74mm11Mh//zneoqvyzrWYGU6TNcaTxVgODogklGYY6doRLelZ0qc
 4HFSqrtkUtx+lI++9Q73LcX5xdogTGxOnNv/hr3rCCR/w9tFmys14JKnfUDQCbhj
 qRTFlr9IkIkhfCiRw5+zNo0oRf/hE7IOgYdU2ju31j4w/V5r8TUKPTq2VBh2sJaG
 MJKQclaIBJOV5sxgJrI/XoocTes7H3WR0w5rSB1askbhzQnKkrhctPOEB6Rkvtyv
 27z5VZb1AmPdYaa6TtHVZ5SQOB3Y9JaEl6t89X61kxk7mgylZlwhASUuBVRZpz53
 WIjNfquYGpWnA+vc+SWnlMnaymqtlatGig8k8atdDn+eMiXphktL+gObIF1OFnm1
 AhGhUxXf/Aw=
 =qJNg
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This merge window we have one small clk provider API in the core
  framework and then a bunch of driver updates and a handful of new
  drivers. In terms of diffstat the Qualcomm and Amlogic drivers are
  high up there because of all the clk data introcued by new drivers.
  The Nvidia Tegra driver had a lot of work done this cycle too to
  support suspend/resume and memory controllers. And the OMAP clk driver
  got proper clk and reset handling in place.

  Rounding out the patches are various updates to remove unused data,
  mark things static, correct incorrect data in drivers, etc. All the
  little things that improve drivers and maintain code health. I will
  point out that there's a patch in here for the GPIO clk driver, that
  almost nobody uses, which changes behavior and causes clk_set_rate()
  to try to change the GPIO gate clk's parent. Other than that things
  are fairly well SoC specific here.

  Core:
   - Add a clk provider API to get current parent index
   - Plug a memory leak in clk_unregister() path

  New Drivers:
   - CGU in Ingenix X1000
   - Bitmain BM1880 clks
   - Qualcomm MSM8998 GPU clk controllers
   - Qualcomm SC7180 GCC and RPMH clk controllers
   - Qualcomm QCS404 Q6SSTOP clk controllers
   - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
   - Add support for the Renesas RZ/G2N (r8a774b1) SoC
   - Add Tegra20/30 External Memory Clock (EMC) support

  Updates:
   - Make gpio gate clks propagate rate setting up to parent
   - Prepare Armada 3700 for suspend to RAM by moving PCIe
     suspend/resume priority
   - Drop unused variables, enums, etc. in various clk drivers
   - Convert various drivers to use devm_platform_ioremap_resource()
   - Use struct_size() some more in various clk drivers
   - Improve Rockchip px30 clk tree
   - Add suspend/resume support to Tegra210 clk driver
   - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
   - Allwinner DT exports and H6 clk tree fixes
   - Proper clk and reset handling for OMAP SoCs
   - Revamped TI divider clk to clamp max divider
   - Make 1443X/1416X PLL clock structure common for reusing among i.MX8
     SoCs
   - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
   - Add VIDEO2_PLL clock for imx8mq
   - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
   - Add sm1 support in the Amlogic audio clock controller
   - Switch some clocks on R-Car Gen2/3 to .determine_rate()
   - Remove Renesas R-Car Gen2 legacy DT clock support
   - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
   - Improve Renesas R-Car Gen3 SD clock handling
   - Add rate table for Samsung exynos542x GPU and VPLL clks
   - Fix potential CPU performance degradation after system
     suspend/resume cycle on exynos542x SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits)
  clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
  MAINTAINERS: Add entry for BM1880 SoC clock driver
  clk: Add common clock driver for BM1880 SoC
  dt-bindings: clock: Add devicetree binding for BM1880 SoC
  clk: Add clk_hw_unregister_composite helper function definition
  clk: Zero init clk_init_data in helpers
  clk: ingenic: Allow drivers to be built with COMPILE_TEST
  MAINTAINERS: Update section for Ux500 clock drivers
  clk: mark clk_disable_unused() as __init
  clk: Fix memory leak in clk_unregister()
  clk: Ingenic: Add CGU driver for X1000.
  dt-bindings: clock: Add X1000 bindings.
  clk: tegra: Use match_string() helper to simplify the code
  clk: pxa: fix one of the pxa RTC clocks
  clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
  clk: armada-xp: remove unused code
  clk: tegra: Fix build error without CONFIG_PM_SLEEP
  clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
  clk: tegra: Optimize PLLX restore on Tegra20/30
  clk: tegra: Add suspend and resume support on Tegra210
  ...
2019-12-01 16:06:02 -08:00
Jernej Skrabec
4441b57ec2
clk: sunxi-ng: h3: Export MBUS clock
MBUS clock will be referenced in MBUS controller node.

Export it.

Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-05 11:34:41 +01:00
Colin Ian King
cdfc2e2086
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
The zero'ing of bits 16 and 18 is incorrect. Currently the code
is masking with the bitwise-and of BIT(16) & BIT(18) which is
0, so the updated value for val is always zero. Fix this by bitwise
and-ing value with the correct mask that will zero bits 16 and 18.

Addresses-Coverity: (" Suspicious &= or |= constant expression")
Fixes: b8eb71dcdd ("clk: sunxi-ng: Add A80 CCU")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-29 08:42:52 +01:00
Jernej Skrabec
834f65e18c
clk: sunxi-ng: h6: Allow GPU to change parent rate
GPU PLL was designed with dynamic frequency switching in mind so driver
can adjust rate based on the GPU load.

Allow GPU clock to change parent rate (GPU PLL is the only possible
parent of GPU clock).

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-02 08:05:40 +02:00
Jernej Skrabec
3ee5f8ab5e
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL
Audio devices needs exact clock rates in order to correctly reproduce
the sound. Until now, only integer factors were used to configure H6
audio PLL which resulted in inexact rates. Fix that by adding support
for fractional factors using sigma-delta modulation look-up table. It
contains values for two most commonly used audio base frequencies.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-30 22:12:27 +02:00
Stephen Boyd
a1ff1ce300 Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration

* clk-init-destroy:
  clk: Overwrite clk_hw::init with NULL during clk_register()
  clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered
  clk: ti: Don't reference clk_init_data after registration
  clk: qcom: Remove error prints from DFS registration
  rtc: sun6i: Don't reference clk_init_data after registration
  clk: zx296718: Don't reference clk_init_data after registration
  clk: milbeaut: Don't reference clk_init_data after registration
  clk: socfpga: deindent code to proper indentation
  phy: ti: am654-serdes: Don't reference clk_init_data after registration
  clk: sprd: Don't reference clk_init_data after registration
  clk: socfpga: Don't reference clk_init_data after registration
  clk: sirf: Don't reference clk_init_data after registration
  clk: qcom: Don't reference clk_init_data after registration
  clk: meson: axg-audio: Don't reference clk_init_data after registration
  clk: lochnagar: Don't reference clk_init_data after registration
  clk: actions: Don't reference clk_init_data after registration

* clk-doc:
  clk: remove extra ---help--- tags in Kconfig
  clk: add include guard to clk-conf.h
  clk: Document of_parse_clkspec() some more
  clk: Remove extraneous 'for' word in comments

* clk-imx: (32 commits)
  clk: imx: imx8mn: fix pll mux bit
  clk: imx: imx8mm: fix pll mux bit
  clk: imx: clk-pll14xx: unbypass PLL by default
  clk: imx: pll14xx: avoid glitch when set rate
  clk: imx: imx8mn: fix audio pll setting
  clk: imx8mn: Add necessary frequency support for ARM PLL table
  clk: imx8mn: Add missing rate_count assignment for each PLL structure
  clk: imx8mn: fix int pll clk gate
  clk: imx8mn: Add GIC clock
  clk: imx8mn: Fix incorrect parents
  clk: imx8mm: Fix incorrect parents
  clk: imx8mq: Fix sys3 pll references
  clk: imx8mq: Unregister clks when of_clk_add_provider failed
  clk: imx8mm: Unregister clks when of_clk_add_provider failed
  clk: imx8mq: Mark AHB clock as critical
  clk: imx8mn: Keep uart clocks on for early console
  clk: imx: Remove unused function statement
  clk: imx7ulp: Make sure earlycon's clock is enabled
  clk: imx8mm: Switch to platform driver
  clk: imx: imx8mm: fix audio pll setting
  ...

* clk-allwinner:
  clk: sunxi-ng: h6: Allow I2S to change parent rate
  clk: sunxi-ng: v3s: add Allwinner V3 support
  clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
  dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU
  clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-19 15:31:27 -07:00
Jernej Skrabec
65818ad081 clk: sunxi-ng: h6: Allow I2S to change parent rate
I2S doesn't work if parent rate couldn't be change. Difference between
wanted and actual rate is too big.

Fix this by adding CLK_SET_RATE_PARENT flag to I2S clocks.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-21 17:20:31 +08:00
Stephen Boyd
a7b85ad25a clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered
The implementation of clk_hw_get_name() relies on the clk_core
associated with the clk_hw pointer existing. If of_clk_hw_register()
fails, there isn't a clk_core created yet, so calling clk_hw_get_name()
here fails. Extract the name first so we can print it later.

Fixes: 1d80c14248 ("clk: sunxi-ng: Add common infrastructure")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-16 10:27:29 -07:00
Icenowy Zheng
0ed4c252bf
clk: sunxi-ng: v3s: add Allwinner V3 support
Allwinner V3 has the same main die with V3s, but with more pins wired.
There's a I2S bus on V3 that is not available on V3s.

Add the V3-only peripheral's clocks and reset to the V3s CCU driver,
bound to a new V3 compatible string. The driver name is not changed
because it's part of the device tree binding (the header file name).

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-12 10:05:48 +02:00
Icenowy Zheng
720099603d
clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
The MMC2 clock slices are currently not defined in V3s CCU driver, which
makes MMC2 not working.

Fix this issue.

Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-12 10:05:13 +02:00
Icenowy Zheng
c5ed9475c2
clk: sunxi-ng: v3s: add the missing PLL_DDR1
The user manual of V3/V3s/S3 declares a PLL_DDR1, however it's forgot
when developing the V3s CCU driver.

Add back the missing PLL_DDR1.

Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-22 08:33:20 +02:00
Linus Torvalds
916f562fb2 This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00
Stephen Boyd
f925a054f0 Allwinner sunxi-ng clk driver parent relation rewrite part 1 - take 2
The first part of ongoing work to convert the sunxi-ng clk driver from
 using global clock name strings to describe clk parenting, to having
 direct struct clk_hw pointers, or local names based on clock-names from
 the device tree binding.
 
 This is based on Stephen Boyd's recent work allowing clk drivers to
 specify clk parents using struct clk_hw * or parsing DT phandles in the
 clk node.
 
 This series can be split into a few major parts:
 
 1) The first patch is a small fix for clk debugfs representation.
 
 2) A bunch of CLK_HW_INIT_* helper macros are added. These cover the
    situations I encountered, or assume I will encounter, such as single
    internal (struct clk_hw *) parent, single DT (struct clk_parent_data
    .fw_name), multiple internal parents, and multiple mixed (internal +
    DT) parents. A special variant for just an internal single parent is
    added, CLK_HW_INIT_HWS, which lets the driver share the singular
    list, instead of having the compiler create a compound literal every
    time. It might even make sense to only keep this variant.
 
 3) A bunch of CLK_FIXED_FACTOR_* helper macros are added. The rationale
    is the same as the single parent CLK_HW_INIT_* helpers.
 
 4) Bulk conversion of CLK_FIXED_FACTOR to use local parent references,
    either struct clk_hw * or DT .fw_name types, whichever the hardware
    requires.
 
 5) The beginning of SUNXI_CCU_GATE conversion to local parent
    references. This part is not done. They are included as justification
    and examples for the shared list of clk parents case.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAl0NkFUOHHdlbnNAY3Np
 ZS5vcmcACgkQOJpUIZwPJDDs1A/8CxGjEgNUYTQZRfJRdOXARlfwBcejVbBt4YUV
 /BX4weCyrViT/9feOcHlalfdvleG7B3bmB7Q9s7M/UjDDL6uikoIw49idPqF5MLS
 ZK0O+rz4Ok5vsmAkn0cyeDy3W7difWA9/5ic+diLzonjl4j/isQIgiiaIUrjZ35w
 2LnFKLNPHhzfohNP8RdgvMUnZEric/4X5gx6cKUKMx5bBH2gyNaGxqYh5rq5o792
 63SpACc/sMpfhGHyY1c8SPqlL1HR6K6C5Ecp+jvc9Es7mdVeea1fF0qetNt5ZeH2
 kmvA3tWu7Dsy5yLcr/KLLdQjBfrg8dgcDC97t/Ks+u//QeKGaSqho6PskM+BwbnO
 kxSwziVcZC2ZQDjtB4VtLzcw1Td4Sph2+Q7Lt9MeDrLS3pwpimVLS6AtZZ9YIHWg
 tLh2FyxvZRhS/8h8pVb5LiJKqEx2q7e689fVuHAzmEFAiD0nHDzyDbVIjGM7Hqgd
 wp5pTi5NaZhAA416NjaZspzGXhuXubgg72zx9yaFtnrgdEHbCbmdCeAU8fubpcdr
 GAdrMG9k7Fn3Kr/bSXPTzjIlNuSQrB0Tzs6YP090DzaYSs05DbWh4KPVW5eOhjld
 vVXAb6O4467Hcn70hWoN17m2kFpWEE1C9aQbb2m7BexyXqtqsfaZqnCwP2HTLAZJ
 xBAOxqU=
 =VdZo
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-ng-parent-rewrite-part-1-take-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner

Pull Allwinner sunxi-ng clk driver parent relation rewrite part 1 - take 2
from Chen-Yu Tsai:

"The first part of ongoing work to convert the sunxi-ng clk driver from
using global clock name strings to describe clk parenting, to having
direct struct clk_hw pointers, or local names based on clock-names from
the device tree binding.

This is based on Stephen Boyd's recent work allowing clk drivers to
specify clk parents using struct clk_hw * or parsing DT phandles in the
clk node.

This series can be split into a few major parts:

1) The first patch is a small fix for clk debugfs representation.

2) A bunch of CLK_HW_INIT_* helper macros are added. These cover the
   situations I encountered, or assume I will encounter, such as single
   internal (struct clk_hw *) parent, single DT (struct clk_parent_data
   .fw_name), multiple internal parents, and multiple mixed (internal +
   DT) parents. A special variant for just an internal single parent is
   added, CLK_HW_INIT_HWS, which lets the driver share the singular
   list, instead of having the compiler create a compound literal every
   time. It might even make sense to only keep this variant.

3) A bunch of CLK_FIXED_FACTOR_* helper macros are added. The rationale
   is the same as the single parent CLK_HW_INIT_* helpers.

4) Bulk conversion of CLK_FIXED_FACTOR to use local parent references,
   either struct clk_hw * or DT .fw_name types, whichever the hardware
   requires.

5) The beginning of SUNXI_CCU_GATE conversion to local parent
   references. This part is not done. They are included as justification
   and examples for the shared list of clk parents case."

* tag 'sunxi-ng-parent-rewrite-part-1-take-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (25 commits)
  clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATE
  clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATE
  clk: sunxi-ng: gate: Add macros for referencing local clock parents
  clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: a10: Use local parent references for CLK_FIXED_FACTOR
  clk: sunxi-ng: sun8i-r: Use local parent references for CLK_HW_INIT_*
  clk: sunxi-ng: switch to of_clk_hw_register() for registering clks
  clk: fixed-factor: Add CLK_FIXED_FACTOR_FW_NAME for DT clock-names parent
  clk: fixed-factor: Add CLK_FIXED_FACTOR_HWS which takes list of struct clk_hw *
  ...
2019-06-24 18:28:31 -07:00
Chen-Yu Tsai
89f27fb2dd clk: sunxi-ng: sun8i-r: Use local parent references for SUNXI_CCU_GATE
With the new clk parenting code and SUNXI_CCU_GATE macros, we can
reference parents locally via pointers to struct clk_hw or DT
clock-names.

Convert existing SUNXI_CCU_GATE definitions to SUNXI_CCU_GATE_HWS
as the parent clock is internal to this clock unit.

To avoid duplication of clock definitions, we fix up the parent
reference for A83T in the A83T init function.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
4b88915184 clk: sunxi-ng: a80-usb: Use local parent references for SUNXI_CCU_GATE
With the new clk parenting code and SUNXI_CCU_GATE macros, we can
reference parents locally via pointers to struct clk_hw or DT
clock-names.

Convert existing SUNXI_CCU_GATE definitions to SUNXI_CCU_GATE_DATA to
specify the parent clock.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
4b751ffae7 clk: sunxi-ng: gate: Add macros for referencing local clock parents
With the new clk parenting code, clk_init_data was expanded to include
.parent_hws, for clk drivers to directly reference parents by clk_hw,
and .parent_data, for clk drivers to specify parents using a combination
of device tree clock-names, pointers to struct clk_hw, device tree clocks,
and/or fallback global clock names.

Add four new macros:

  - SUNXI_CCU_GATE_HW, that can take a struct clk_hw pointer, instead
    of a string, as its parent.

  - SUNXI_CCU_GATE_FW that takes a string to match a clock-names entry
    in the device tree to specify the clock parent.

  - SUNXI_CCU_GATE_HWS that takes an array of struct clk_hw * as its
    parent. This allows the array to be shared with other clk
    declarations.

  - SUNXI_CCU_GATE_DATA that takes an array of struct clk_parent_data *
    as its parent. This allows the array to be shared with other clk
    declarations.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
22ce173f76 clk: sunxi-ng: h6-r: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
8916d3fc3a clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk
is added as the definitions of the fixed factor clocks appear much later
in the file. The position of fixed factor clock definitions will be
moved for all drivers at a later time, before the conversion of all
other clock types.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
ecd73c04b3 clk: sunxi-ng: a64: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
4d34497ee4 clk: sunxi-ng: f1c100s: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-22 10:13:16 +08:00
Chen-Yu Tsai
45d0706ebf clk: sunxi-ng: sun8i-r: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:03 +08:00
Chen-Yu Tsai
707f601373 clk: sunxi-ng: v3s: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:03 +08:00
Chen-Yu Tsai
3fccf2ed6f clk: sunxi-ng: r40: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:03 +08:00
Chen-Yu Tsai
b28e3eb632 clk: sunxi-ng: h3: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:02 +08:00
Chen-Yu Tsai
cdaf8388ea clk: sunxi-ng: a33: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:01 +08:00
Chen-Yu Tsai
7a40e3d869 clk: sunxi-ng: a23: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:01 +08:00
Chen-Yu Tsai
8b1dd564b9 clk: sunxi-ng: a31: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:01 +08:00
Chen-Yu Tsai
260311bfb3 clk: sunxi-ng: sun5i: Use local parent references for CLK_FIXED_FACTOR
With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME}
macros, we can reference parents locally via pointers to struct clk_hw
or DT clock-names.

Convert existing CLK_FIXED_FACTOR definitions to either the _HW or
_FW_NAME variant based on whether the parent clock is internal or
external to the CCU.

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-06-18 19:39:01 +08:00