Commit Graph

93 Commits

Author SHA1 Message Date
Michael Ellerman
5853aef1ac powerpc: Add threads_per_subcore
On POWER8 we have a new concept of a subcore. This is what happens when
you take a regular core and split it. A subcore is a grouping of two or
four SMT threads, as well as a handfull of SPRs which allows the subcore
to appear as if it were a core from the point of view of a guest.

Unlike threads_per_core which is fixed at boot, threads_per_subcore can
change while the system is running. Most code will not want to use
threads_per_subcore.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-28 13:35:35 +10:00
Gautham R. Shenoy
2299d03a63 powerpc: powernv: Framework to show the correct clock in /proc/cpuinfo
Currently, the code in setup-common.c for powerpc assumes that all
clock rates are same in a smp system. This value is cached in the
variable named ppc_proc_freq and is the value that is reported in
/proc/cpuinfo.

However on the PowerNV platform, the clock rate is same only across
the threads of the same core. Hence the value that is reported in
/proc/cpuinfo is incorrect on PowerNV platforms. We need a better way
to query and report the correct value of the processor clock in
/proc/cpuinfo.

The patch achieves this by creating a machdep_call named
get_proc_freq() which is expected to returns the frequency in Hz. The
code in show_cpuinfo() can invoke this method to display the correct
clock rate on platforms that have implemented this method. On the
other powerpc platforms it can use the value cached in ppc_proc_freq.

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28 17:36:38 +10:00
Benjamin Herrenschmidt
36ae37e343 powerpc: Make boot_cpuid common between 32 and 64-bit
Move the definition to setup-common.c and set the init value
to -1 on both 32 and 64-bit (it was 0 on 64-bit).

Additionally add a check to prom.c to garantee that the init
value has been udpated after the DT scan.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-07 10:33:14 +10:00
Anton Blanchard
01666c8ee2 powerpc: Fix endian issue in setup-common.c
During on LE boot we see:

    Partition configured for 1073741824 cpus, operating system maximum is 2048.

Clearly missing a byteswap here.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-13 15:48:34 +11:00
Robert Jennings
b88c4767d9 powerpc: Move local setup.h declarations to arch includes
Move the few declarations from arch/powerpc/kernel/setup.h
into arch/powerpc/include/asm/setup.h.  This resolves a
sparse warning for arch/powerpc/mm/numa.c which defines
do_init_bootmem() but can't include the setup.h header
in the prior path.

Resolves:
arch/powerpc/mm/numa.c:998:13:
        warning: symbol 'do_init_bootmem' was not declared.
                 Should it be static?

Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 16:00:31 +11:00
Alistair Popple
43f8812027 powerpc: More little endian fixes for setup-common.c
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:24 +10:00
Anton Blanchard
ac13282dff powerpc: Make logical to real cpu mapping code endian safe
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 15:33:23 +10:00
Paul Bolle
933ee7119f powerpc: remove PReP platform
PPC_PREP is marked as BROKEN since v2.6.15. Remove all PReP specific
code now.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-04-18 13:03:53 +10:00
Shaohui Xie
c5f02bb422 powerpc/watchdog: move booke watchdog param related code to setup-common.c
Currently, BOOKE watchdog code for checking "wdt" and "wdt_period" is
in setup_32.c, it cannot be used in 64-bit, so move it to a common place
setup-common.c, which will be shared by 32-bit and 64-bit.

Also, replace the simple_strtoul with kstrtol.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11 07:44:03 -05:00
David Howells
ae3a197e3d Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PowerPC.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: linuxppc-dev@lists.ozlabs.org
2012-03-28 18:30:02 +01:00
Mahesh Salgaonkar
67b43b9d7c fadump: Invalidate the fadump registration during machine shutdown.
If dump is active during system reboot, shutdown or halt then invalidate
the fadump registration as it does not get invalidated automatically.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23 10:50:03 +11:00
Mahesh Salgaonkar
ebaeb5ae24 fadump: Convert firmware-assisted cpu state dump data into elf notes.
When registered for firmware assisted dump on powerpc, firmware preserves
the registers for the active CPUs during a system crash. This patch reads
the cpu register data stored in Firmware-assisted dump format (except for
crashing cpu) and converts it into elf notes and updates the PT_NOTE program
header accordingly. The exact register state for crashing cpu is saved to
fadump crash info structure in scratch area during crash_fadump() and read
during second kernel boot.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23 10:50:01 +11:00
Paul Gortmaker
4b16f8e2d6 powerpc: various straight conversions from module.h --> export.h
All these files were including module.h just for the basic
EXPORT_SYMBOL infrastructure.  We can shift them off to the
export.h header which is a way smaller footprint and thus
realize some compile time gains.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:30:44 -04:00
Linus Torvalds
184475029a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits)
  drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c
  powerpc/85xx: fix mpic configuration in CAMP mode
  powerpc: Copy back TIF flags on return from softirq stack
  powerpc/64: Make server perfmon only built on ppc64 server devices
  powerpc/pseries: Fix hvc_vio.c build due to recent changes
  powerpc: Exporting boot_cpuid_phys
  powerpc: Add CFAR to oops output
  hvc_console: Add kdb support
  powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon
  powerpc/irq: Quieten irq mapping printks
  powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs
  powerpc: Add mpt2sas driver to pseries and ppc64 defconfig
  powerpc: Disable IRQs off tracer in ppc64 defconfig
  powerpc: Sync pseries and ppc64 defconfigs
  powerpc/pseries/hvconsole: Fix dropped console output
  hvc_console: Improve tty/console put_chars handling
  powerpc/kdump: Fix timeout in crash_kexec_wait_realmode
  powerpc/mm: Fix output of total_ram.
  powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards
  powerpc: Correct annotations of pmu registration functions
  ...

Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and
drivers/cpufreq
2011-07-25 22:59:39 -07:00
Paul Mackerras
de56a948b9 KVM: PPC: Add support for Book3S processors in hypervisor mode
This adds support for KVM running on 64-bit Book 3S processors,
specifically POWER7, in hypervisor mode.  Using hypervisor mode means
that the guest can use the processor's supervisor mode.  That means
that the guest can execute privileged instructions and access privileged
registers itself without trapping to the host.  This gives excellent
performance, but does mean that KVM cannot emulate a processor
architecture other than the one that the hardware implements.

This code assumes that the guest is running paravirtualized using the
PAPR (Power Architecture Platform Requirements) interface, which is the
interface that IBM's PowerVM hypervisor uses.  That means that existing
Linux distributions that run on IBM pSeries machines will also run
under KVM without modification.  In order to communicate the PAPR
hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code
to include/linux/kvm.h.

Currently the choice between book3s_hv support and book3s_pr support
(i.e. the existing code, which runs the guest in user mode) has to be
made at kernel configuration time, so a given kernel binary can only
do one or the other.

This new book3s_hv code doesn't support MMIO emulation at present.
Since we are running paravirtualized guests, this isn't a serious
restriction.

With the guest running in supervisor mode, most exceptions go straight
to the guest.  We will never get data or instruction storage or segment
interrupts, alignment interrupts, decrementer interrupts, program
interrupts, single-step interrupts, etc., coming to the hypervisor from
the guest.  Therefore this introduces a new KVMTEST_NONHV macro for the
exception entry path so that we don't have to do the KVM test on entry
to those exception handlers.

We do however get hypervisor decrementer, hypervisor data storage,
hypervisor instruction storage, and hypervisor emulation assist
interrupts, so we have to handle those.

In hypervisor mode, real-mode accesses can access all of RAM, not just
a limited amount.  Therefore we put all the guest state in the vcpu.arch
and use the shadow_vcpu in the PACA only for temporary scratch space.
We allocate the vcpu with kzalloc rather than vzalloc, and we don't use
anything in the kvmppc_vcpu_book3s struct, so we don't allocate it.
We don't have a shared page with the guest, but we still need a
kvm_vcpu_arch_shared struct to store the values of various registers,
so we include one in the vcpu_arch struct.

The POWER7 processor has a restriction that all threads in a core have
to be in the same partition.  MMU-on kernel code counts as a partition
(partition 0), so we have to do a partition switch on every entry to and
exit from the guest.  At present we require the host and guest to run
in single-thread mode because of this hardware restriction.

This code allocates a hashed page table for the guest and initializes
it with HPTEs for the guest's Virtual Real Memory Area (VRMA).  We
require that the guest memory is allocated using 16MB huge pages, in
order to simplify the low-level memory management.  This also means that
we can get away without tracking paging activity in the host for now,
since huge pages can't be paged or swapped.

This also adds a few new exports needed by the book3s_hv code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-12 13:16:54 +03:00
Kumar Gala
314b02f503 powerpc: implement arch_setup_pdev_archdata
We have a long standing issues with platform devices not have a valid
dma_mask pointer.  This hasn't been an issue to date as no platform
device has tried to set its dma_mask value to a non-default value.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-08 00:21:36 -05:00
Dave Carroll
a9c0f41b3a powerpc: Add printk companion for ppc_md.progress
This patch adds a printk companion to replace the udbg progress function
when initmem is freed.

Suggested-by: Milton Miller <miltonm@bga.com>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Carroll <dcarroll@astekcorp.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-30 15:28:05 +10:00
Gabriel Paubert
2c78027a62 powerpc: Fix for Pegasos keyboard and mouse
[See http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-October/086424.html
and followups. Part of the commit message is directly copied from that.]

Commit 540c6c392f tries to find i8042 IRQs in
the device-tree but doesn't fall back to the old hardcoded 1 and 12 in all
failure cases.

Specifically, the case where the device-tree contains nothing matching
pnpPNP,303 or pnpPNP,f03 doesn't seem to be handled well. It sort of falls
through to the old code, but leaves the IRQs set to 0.

Signed-off-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 17:32:27 +10:00
Milton Miller
aa79bc2167 powerpc: Call no-longer static setup_nr_cpu_ids instead of replicating it
c1854e0072 (powerpc: Set nr_cpu_ids early
and use it to free PACAs) copied the formerly static setup_nr_cpu_ids
from init/main.c but 34db18a054 (smp:
move smp setup functions to kernel/smp.c) moved it to kernel/smp.c
with a declaration in include/linux/smp.h, so we can call it instead of
replicating it.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:45 +10:00
Milton Miller
8657ae28dd powerpc: Respect nr_cpu_ids when calling set_cpu_possible and set_cpu_present
We should not set cpus above nr_cpu_ids to possible.  While we
will trigger a warning with CONFIG_CPUMASK_DEBUG, even then the mask
initializers will set the bits beyond what the iterators check and cause
nr_cpu_ids to increase.

Respecting nr_cpu_ids during setup will allow us to use it in our initial
paca allocation.  It can be reduced from NR_CPUS by the existing early param
nr_cpus=, which was added in 2b633e3fac (smp:
Use nr_cpus= to set nr_cpu_ids early).  We already call parse_early_parms
between finding the command line and allocating the pacas.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 14:30:44 +10:00
KOSAKI Motohiro
104699c0ab powerpc: Convert old cpumask API into new one
Adapt new API.

Almost change is trivial. Most important change is the below line
because we plan to change task->cpus_allowed implementation.

-       ctx->cpus_allowed = current->cpus_allowed;

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-04 15:22:59 +10:00
Ryan Grimm
c1854e0072 powerpc: Set nr_cpu_ids early and use it to free PACAs
Without this, "holes" in the CPU numbering can cause us to
free too many PACAs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05 16:22:11 +10:00
Grant Likely
ee11006613 powerpc: fix i8042 module build error
of_i8042_{kbd,aux}_irq needs to be exported

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-06 20:49:20 -06:00
Linus Torvalds
03c0c29aff Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.
2010-08-05 15:57:35 -07:00
Benjamin Herrenschmidt
412a4ac5e9 Merge commit 'gcl/next' into next 2010-08-04 10:26:03 +10:00
Grant Likely
eca3930163 of: Merge of_platform_bus_type with platform_bus_type
of_platform_bus was being used in the same manner as the platform_bus.
The only difference being that of_platform_bus devices are generated
from data in the device tree, and platform_bus devices are usually
statically allocated in platform code.  Having them separate causes
the problem of device drivers having to be registered twice if it
was possible for the same device to appear on either bus.

This patch removes of_platform_bus_type and registers all of_platform
bus devices and drivers on the platform bus instead.  A previous patch
made the of_device structure an alias for the platform_device structure,
and a shim is used to adapt of_platform_drivers to the platform bus.

After all of of_platform_bus drivers are converted to be normal platform
drivers, the shim code can be removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:51 -06:00
Yinghai Lu
95f72d1ed4 lmb: rename to memblock
via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/

Suggested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14 17:14:00 +10:00
Martyn Welch
540c6c392f powerpc: Add i8042 keyboard and mouse irq parsing
Currently the irqs for the i8042, which historically provides keyboard and
mouse (aux) support, is hardwired in the driver rather than parsing the
dts.  This patch modifies the powerpc legacy IO code to attempt to parse
the device tree for this information, failing back to the hardcoded values
if it fails.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09 11:28:33 +10:00
Anton Blanchard
828a69869b powerpc/cpumask: Update some comments
Since the *_map cpumask variants are deprecated, change the comments to
instead refer to *_mask.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 17:41:59 +10:00
Anton Blanchard
e6532c63cc powerpc/cpumask: Convert /proc/cpuinfo to new cpumask API
Use new cpumask API in /proc/cpuinfo code.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 17:41:55 +10:00
Anton Blanchard
2c2df03845 powerpc/cpumask: Refactor /proc/cpuinfo code
This separates the per cpu output from the summary output at the end of the
file, making it easier to convert to the new cpumask API in a subsequent
patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 17:41:54 +10:00
Michael Ellerman
1426d5a3bd powerpc: Dynamically allocate pacas
On 64-bit kernels we currently have a 512 byte struct paca_struct for
each cpu (usually just called "the paca"). Currently they are statically
allocated, which means a kernel built for a large number of cpus will
waste a lot of space if it's booted on a machine with few cpus.

We can avoid that by only allocating the number of pacas we need at
boot. However this is complicated by the fact that we need to access
the paca before we know how many cpus there are in the system.

The solution is to dynamically allocate enough space for NR_CPUS pacas,
but then later in boot when we know how many cpus we have, we free any
unused pacas.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09 11:52:52 +11:00
Linus Torvalds
d0316554d3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c
2009-12-14 09:58:24 -08:00
Tejun Heo
6b7487fc65 percpu: make percpu symbols in powerpc unique
This patch updates percpu related symbols in powerpc such that percpu
symbols are unique and don't clash with local symbols.  This serves
two purposes of decreasing the possibility of global percpu symbol
collision and allowing dropping per_cpu__ prefix from percpu symbols.

* arch/powerpc/kernel/perf_callchain.c: s/callchain/cpu_perf_callchain/

* arch/powerpc/kernel/setup-common.c: s/pvr/cpu_pvr/

* arch/powerpc/platforms/pseries/dtl.c: s/dtl/cpu_dtl/

* arch/powerpc/platforms/cell/interrupt.c: s/iic/cpu_iic/

Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
2009-10-29 22:34:14 +09:00
Anton Blanchard
907b1f45d9 powerpc: Export powerpc_debugfs_root
Kernel modules should be able to place their debug output inside our
powerpc debugfs directory.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:04 +11:00
Linus Torvalds
94a8d5caba Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (39 commits)
  cpumask: Move deprecated functions to end of header.
  cpumask: remove unused deprecated functions, avoid accusations of insanity
  cpumask: use new-style cpumask ops in mm/quicklist.
  cpumask: use mm_cpumask() wrapper: x86
  cpumask: use mm_cpumask() wrapper: um
  cpumask: use mm_cpumask() wrapper: mips
  cpumask: use mm_cpumask() wrapper: mn10300
  cpumask: use mm_cpumask() wrapper: m32r
  cpumask: use mm_cpumask() wrapper: arm
  cpumask: Use accessors for cpu_*_mask: um
  cpumask: Use accessors for cpu_*_mask: powerpc
  cpumask: Use accessors for cpu_*_mask: mips
  cpumask: Use accessors for cpu_*_mask: m32r
  cpumask: remove arch_send_call_function_ipi
  cpumask: arch_send_call_function_ipi_mask: s390
  cpumask: arch_send_call_function_ipi_mask: powerpc
  cpumask: arch_send_call_function_ipi_mask: mips
  cpumask: arch_send_call_function_ipi_mask: m32r
  cpumask: arch_send_call_function_ipi_mask: alpha
  cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64
  ...
2009-09-23 18:14:11 -07:00
Alexey Dobriyan
2bcd57ab61 headers: utsname.h redux
* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 18:13:10 -07:00
Rusty Russell
ea0f1cab6e cpumask: Use accessors for cpu_*_mask: powerpc
Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-09-24 09:34:48 +09:30
James Morris
88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Huang Weiyi
85701e6ac1 powerpc: Remove duplicated #include's
Remove duplicated #include's in
  - arch/powerpc/include/asm/ps3fb.h
  - arch/powerpc/kernel/setup-common.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-04-07 15:18:58 +10:00
Kumar Gala
d746286c1f powerpc: setup default archdata for {of_}platform via bus_register_notifier
Since a number of powerpc chips are SoCs we end up having dma-able
devices that are registered as platform or of_platform devices.  We need
to hook the archdata to setup proper dma_ops for these devices.

Rather than having to add a bus_notify to each platform we add a default
one at the highest priority (called first) to set the default dma_ops for
of_platform and platform devices to dma_direct_ops.  This allows platform
code to override the ops by providing their own notifier call back.

In the future to enable >4G DMA support on ppc32 we can hook swiotlb ops.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:30 +11:00
Becky Bruce
f465df81a8 powerpc: Move memory size print into common show_cpuinfo for 32-bit
Most of the platforms were printing the size of the memory
in their show_cpuinfo implementations. This moves that to
the common show_cpuinfo, so that all 32-bit platforms will
now print the size of memory.  I also update the code
to deal with the fact that total_memory is now a phys_addr_t.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22 11:00:25 +11:00
Martin Langer
a501d8f30e powerpc: Fix major revision number for Freescale cores
Some 74xx cores by Freescale are using the configuration field instead
of the major revision field for their revision number.  This corrects
the wrong behaviour for those ppc cores including my one.

There is a reference document at Freecale.  It describes the PVR
register.  This is based on that pdf.  You can find the document at:

http://www.freescale.com/files/archives/doc/support_info/PPCPVR.pdf

Signed-off-by: Martin Langer <martin-langer@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15 11:08:48 -07:00
Nathan Lynch
e2075f79a9 powerpc: Update cpu_sibling_maps dynamically
Rather doing one initialization pass over all the per-cpu
cpu_sibling_maps at boot, update the maps at cpu online/offline time.

This is a behavior change -- the thread_siblings attribute now
reflects only online siblings, whereas it would display offline
siblings before.  The new behavior matches that of x86, and is
arguably more useful.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28 16:30:49 +10:00
Emil Medve
d33b78df14 powerpc: Add the PC speaker only when requested
This eliminates this minor boot-time debugging error message:

[    1.316451] calling  add_pcspkr+0x0/0x84
[    1.316478] initcall add_pcspkr+0x0/0x84 returned -19 after 0 msecs

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-09 13:42:30 +10:00
Marian Balakowicz
0276c1368f [POWERPC] Add 'model: ...' line to common show_cpuinfo()
Print out 'model' property of '/' node as a machine name
in generic show_cpuinfo() routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:04 +11:00
David S. Miller
d9b2b2a277 [LIB]: Make PowerPC LMB code generic so sparc64 can use it too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-13 16:56:49 -08:00
Benjamin Herrenschmidt
8d089085a4 [POWERPC] Cleanup SMT thread handling
This cleans up the SMT thread handling, removing some hard coded
assumptions and providing a set of helpers to convert between linux
cpu numbers, thread numbers and cores.

This implementation requires the number of threads per core to be a
power of 2 and identical on all cores in the system, but it's an
implementation detail, not an API requirement and so this limitation
can be lifted in the future if anybody ever needs it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:25 +11:00
Mike Travis
d5a7430ddc Convert cpu_sibling_map to be a per cpu variable
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu
variable.  This saves sizeof(cpumask_t) * NR unused cpus.  Access is mostly
from startup and CPU HOTPLUG functions.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:50 -07:00
Stephen Rothwell
19a8d97d89 [POWERPC] Remove cmd_line from head*.S
It is just a C char array, so declare it thusly.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00