Commit Graph

165 Commits

Author SHA1 Message Date
Juergen Gross
82616f9599 xen: remove tests for pvh mode in pure pv paths
Remove the last tests for XENFEAT_auto_translated_physmap in pure
PV-domain specific paths. PVH V1 is gone and the feature will always
be "false" in PV guests.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-08-31 09:45:55 -04:00
Gustavo A. R. Silva
bf1b9ddf18 x86: xen: remove unnecessary variable in xen_foreach_remap_area()
Remove unnecessary variable mfn in function xen_foreach_remap_area() and,
refactor the code.

Variable mfn at line 518:mfn = xen_remap_buf.mfns[i];
is only being used to store a value to be passed as
an argument to the xen_update_mem_tables() function.
This value can be passed directly, which makes variable
mfn unnecessary. Also, value assigned to variable mfn
at line 534:mfn = xen_remap_mfn; is never used.

Addresses-Coverity-ID: 1260110
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-07-03 13:24:17 +02:00
Ingo Molnar
f9748fa045 x86/boot/e820: Simplify the e820__update_table() interface
The e820__update_table() parameters are pretty complex:

  arch/x86/include/asm/e820/api.h:extern int  e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map);

But 90% of the usage is trivial:

  arch/x86/kernel/e820.c:	if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries))
  arch/x86/kernel/e820.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/e820.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/e820.c:		if (e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries) < 0)
  arch/x86/kernel/e820.c:	e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr);
  arch/x86/kernel/early-quirks.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/setup.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/kernel/setup.c:		e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/platform/efi/efi.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/xen/setup.c:	e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries),
  arch/x86/xen/setup.c:	e820__update_table(e820_table->entries, ARRAY_SIZE(e820_table->entries), &e820_table->nr_entries);
  arch/x86/xen/setup.c:	e820__update_table(xen_e820_table.entries, ARRAY_SIZE(xen_e820_table.entries),

as it only uses an exiting struct e820_table's entries array, its size and
its current number of entries as input and output arguments.

Only one use is non-trivial:

  arch/x86/kernel/e820.c:	e820__update_table(boot_params.e820_table, ARRAY_SIZE(boot_params.e820_table), &new_nr);

... which call updates the E820 table in the zeropage in-situ, and the layout there does not
match that of 'struct e820_table' (in particular nr_entries is at a different offset,
hardcoded by the boot protocol).

Simplify all this by introducing a low level __e820__update_table() API that
the zeropage update call can use, and simplifying the main e820__update_table()
call signature down to:

	int e820__update_table(struct e820_table *table);

This visibly simplifies all the call sites:

  arch/x86/include/asm/e820/api.h:extern int  e820__update_table(struct e820_table *table);
  arch/x86/include/asm/e820/types.h: * call to e820__update_table() to remove duplicates.  The allowance
  arch/x86/kernel/e820.c: * The return value from e820__update_table() is zero if it
  arch/x86/kernel/e820.c:int __init e820__update_table(struct e820_table *table)
  arch/x86/kernel/e820.c:	if (e820__update_table(e820_table))
  arch/x86/kernel/e820.c:	e820__update_table(e820_table_firmware);
  arch/x86/kernel/e820.c:	e820__update_table(e820_table);
  arch/x86/kernel/e820.c:	e820__update_table(e820_table);
  arch/x86/kernel/e820.c:		if (e820__update_table(e820_table) < 0)
  arch/x86/kernel/early-quirks.c:	e820__update_table(e820_table);
  arch/x86/kernel/setup.c:	e820__update_table(e820_table);
  arch/x86/kernel/setup.c:		e820__update_table(e820_table);
  arch/x86/platform/efi/efi.c:	e820__update_table(e820_table);
  arch/x86/xen/setup.c:	e820__update_table(&xen_e820_table);
  arch/x86/xen/setup.c:	e820__update_table(e820_table);
  arch/x86/xen/setup.c:	e820__update_table(&xen_e820_table);

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:24 +01:00
Ingo Molnar
e7dbf7ad41 xen, x86/boot/e820: Simplify Xen's xen_e820_table construct
The Xen guest memory setup code has:

	static struct e820_entry xen_e820_table[E820_MAX_ENTRIES] __initdata;
	static u32 xen_e820_table_entries __initdata;

... which is really a 'struct e820_table', open-coded.

Convert the Xen code over to use a single struct e820_table, as this
will allow the simplification of the e820__update_table() API.

No intended change in functionality, but not runtime tested.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:23 +01:00
Ingo Molnar
08b46d5dd8 x86/boot/e820: Clean up the E820 table size define names
We've got a number of defines related to the E820 table and its size:

	E820MAP
	E820NR
	E820_X_MAX
	E820MAX

The first two denote byte offsets into the zeropage (struct boot_params),
and can are not used in the kernel and can be removed.

The E820_*_MAX values have an inconsistent structure and it's unclear in any
case what they mean. 'X' presuably goes for extended - but it's not very
expressive altogether.

Change these over to:

	E820_MAX_ENTRIES_ZEROPAGE
	E820_MAX_ENTRIES

... which are self-explanatory names.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:23 +01:00
Ingo Molnar
09821ff1d5 x86/boot/e820: Prefix the E820_* type names with "E820_TYPE_"
So there's a number of constants that start with "E820" but which
are not types - these create a confusing mixture when seen together
with 'enum e820_type' values:

	E820MAP
	E820NR
	E820_X_MAX
	E820MAX

To better differentiate the 'enum e820_type' values prefix them
with E820_TYPE_.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 22:55:22 +01:00
Ingo Molnar
ab6bc04cfd x86/boot/e820: Create coherent API function names for E820 range operations
We have these three related functions:

 extern void e820_add_region(u64 start, u64 size, int type);
 extern u64  e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type);
 extern u64  e820_remove_range(u64 start, u64 size, unsigned old_type, int checktype);

But it's not clear from the naming that they are 3 operations based around the
same 'memory range' concept. Rename them to better signal this, and move
the prototypes next to each other:

 extern void e820__range_add   (u64 start, u64 size, int type);
 extern u64  e820__range_update(u64 start, u64 size, unsigned old_type, unsigned new_type);
 extern u64  e820__range_remove(u64 start, u64 size, unsigned old_type, int checktype);

Note that this improved organization of the functions shows another problem that was easy
to miss before: sometimes the E820 entry type is 'int', sometimes 'unsigned int' - but this
will be fixed in a separate patch.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 14:42:32 +01:00
Ingo Molnar
f52355a99f x86/boot/e820: Rename sanitize_e820_table() to e820__update_table()
sanitize_e820_table() is a minor misnomer in that it suggests that
the E820 table requires sanitizing - which implies that it will only
do anything if the E820 table is irregular (not sane).

That is wrong, because sanitize_e820_table() also does a very regular
sorting of the E820 table, which is a necessity in the basic
append-only flow of E820 updates the kernel is allowed to perform to
it.

So rename it to e820__update_table() to include that purpose as well.

This also lines up all the table-update functions into a coherent
naming family:

  int  e820__update_table(struct e820_entry *biosmap, int max_nr_map, u32 *pnr_map);

  void e820__update_table_print(void);
  void e820__update_table_firmware(void);

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 14:42:31 +01:00
Ingo Molnar
bf495573fa x86/boot/e820: Harmonize the 'struct e820_table' fields
So the e820_table->map and e820_table->nr_map names are a bit
confusing, because it's not clear what a 'map' really means
(it could be a bitmap, or some other data structure), nor is
it clear what nr_map means (is it a current index, or some
other count).

Rename the fields from:

 e820_table->map        =>     e820_table->entries
 e820_table->nr_map     =>     e820_table->nr_entries

which makes it abundantly clear that these are entries
of the table, and that the size of the table is ->nr_entries.

Propagate the changes to all affected files. Where necessary,
adjust local variable names to better reflect the new field names.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 09:33:16 +01:00
Ingo Molnar
61a5010163 x86/boot/e820: Rename everything to e820_table
No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 09:33:16 +01:00
Ingo Molnar
acd4c04872 x86/boot/e820: Rename 'e820_map' variables to 'e820_array'
In line with the rename to 'struct e820_array', harmonize the naming of common e820
table variable names as well:

 e820          =>  e820_array
 e820_saved    =>  e820_array_saved
 e820_map      =>  e820_array
 initial_e820  =>  e820_array_init

This makes the variable names more consistent  and easier to grep for.

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 09:33:15 +01:00
Ingo Molnar
8ec67d97bf x86/boot/e820: Rename the basic e820 data types to 'struct e820_entry' and 'struct e820_array'
The 'e820entry' and 'e820map' names have various annoyances:

 - the missing underscore departs from the usual kernel style
   and makes the code look weird,

 - in the past I kept confusing the 'map' with the 'entry', because
   a 'map' is ambiguous in that regard,

 - it's not really clear from the 'e820map' that this is a regular
   C array.

Rename them to 'struct e820_entry' and 'struct e820_array' accordingly.

( Leave the legacy UAPI header alone but do the rename in the bootparam.h
  and e820/types.h file - outside tools relying on these defines should
  either adjust their code, or should use the legacy header, or should
  create their private copies for the definitions. )

No change in functionality.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 09:33:14 +01:00
Ingo Molnar
66441bd3cf x86/boot/e820: Move asm/e820.h to asm/e820/api.h
In line with asm/e820/types.h, move the e820 API declarations to
asm/e820/api.h and update all usage sites.

This is just a mechanical, obviously correct move & replace patch,
there will be subsequent changes to clean up the code and to make
better use of the new header organization.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 09:31:13 +01:00
Ross Lagerwall
7ecec8503a xen/setup: Don't relocate p2m over existing one
When relocating the p2m, take special care not to relocate it so
that is overlaps with the current location of the p2m/initrd. This is
needed since the full extent of the current location is not marked as a
reserved region in the e820.

This was seen to happen to a dom0 with a large initial p2m and a small
reserved region in the middle of the initial p2m.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-22 10:04:02 +01:00
Alex Thorlton
738662c35c xen/x86: Increase xen_e820_map to E820_X_MAX possible entries
On systems with sufficiently large e820 tables, and several IOAPICs, it
is possible for the XENMEM_machine_memory_map callback (and its
counterpart, XENMEM_memory_map) to attempt to return an e820 table with
more than 128 entries.  This callback adds entries to the BIOS-provided
e820 table to account for IOAPIC registers, which, on sufficiently large
systems, can result in an e820 table that is too large to copy back into
xen_e820_map.

This change simply increases the size of xen_e820_map to E820_X_MAX to
ensure that there is enough room to store the entire e820 map returned
from this callback.

Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
2016-12-09 10:59:08 +01:00
Denys Vlasenko
475339684e x86/e820: Prepare e280 code for switch to dynamic storage
This patch turns e820 and e820_saved into pointers to e820 tables,
of the same size as before.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160917213927.1787-2-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-21 15:02:12 +02:00
Paul Gortmaker
7a2463dcac x86/xen: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  The advantage
in doing so is that module.h itself sources about 15 other headers;
adding significantly to what we feed cpp, and it can obscure what
headers we are effectively using.

Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance
for the presence of either and replace as needed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20160714001901.31603-7-paul.gortmaker@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 15:06:59 +02:00
Juergen Gross
dd14be92fb xen: use same main loop for counting and remapping pages
Instead of having two functions for cycling through the E820 map in
order to count to be remapped pages and remap them later, just use one
function with a caller supplied sub-function called for each region to
be processed. This eliminates the possibility of a mismatch between
both loops which showed up in certain configurations.

Suggested-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-05-24 12:59:04 +01:00
Linus Torvalds
41ecf1404b xen: features for 4.4-rc0
- Improve balloon driver memory hotplug placement.
 - Use unpopulated hotplugged memory for foreign pages (if
   supported/enabled).
 - Support 64 KiB guest pages on arm64.
 - CPU hotplug support on arm/arm64.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWOeSkAAoJEFxbo/MsZsTRph0H/0nE8Tx0GyGtOyCYfBdInTvI
 WgjvL8VR1XrweZMVis3668MzhLSYg6b5lvJsoi+L3jlzYRyze43iHXsKfvp+8p0o
 TVUhFnlHEHF8ASEtPydAi6HgS7Dn9OQ9LaZ45R1Gk0rHnwJjIQonhTn2jB0yS9Am
 Hf4aZXP2NVZphjYcloqNsLH0G6mGLtgq8cS0uKcVO2YIrR4Dr3sfj9qfq9mflf8n
 sA/5ifoHRfOUD1vJzYs4YmIBUv270jSsprWK/Mi2oXIxUTBpKRAV1RVCAPW6GFci
 HIZjIJkjEPWLsvxWEs0dUFJQGp3jel5h8vFPkDWBYs3+9rILU2DnLWpKGNDHx3k=
 =vUfa
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.4-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from David Vrabel:

 - Improve balloon driver memory hotplug placement.

 - Use unpopulated hotplugged memory for foreign pages (if
   supported/enabled).

 - Support 64 KiB guest pages on arm64.

 - CPU hotplug support on arm/arm64.

* tag 'for-linus-4.4-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (44 commits)
  xen: fix the check of e_pfn in xen_find_pfn_range
  x86/xen: add reschedule point when mapping foreign GFNs
  xen/arm: don't try to re-register vcpu_info on cpu_hotplug.
  xen, cpu_hotplug: call device_offline instead of cpu_down
  xen/arm: Enable cpu_hotplug.c
  xenbus: Support multiple grants ring with 64KB
  xen/grant-table: Add an helper to iterate over a specific number of grants
  xen/xenbus: Rename *RING_PAGE* to *RING_GRANT*
  xen/arm: correct comment in enlighten.c
  xen/gntdev: use types from linux/types.h in userspace headers
  xen/gntalloc: use types from linux/types.h in userspace headers
  xen/balloon: Use the correct sizeof when declaring frame_list
  xen/swiotlb: Add support for 64KB page granularity
  xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlb
  arm/xen: Add support for 64KB page granularity
  xen/privcmd: Add support for Linux 64KB page granularity
  net/xen-netback: Make it running on 64KB page granularity
  net/xen-netfront: Make it running on 64KB page granularity
  block/xen-blkback: Make it running on 64KB page granularity
  block/xen-blkfront: Make it running on 64KB page granularity
  ...
2015-11-04 17:32:42 -08:00
Zhenzhong Duan
abed7d0710 xen: fix the check of e_pfn in xen_find_pfn_range
On some NUMA system, after dom0 up, we see below warning even if there are
enough pfn ranges that could be used for remapping:
"Unable to find available pfn range, not remapping identity pages"

Fix it to avoid getting a memory region of zero size in xen_find_pfn_range.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-02 17:47:38 +00:00
David Vrabel
f5775e0b61 x86/xen: discard RAM regions above the maximum reservation
During setup, discard RAM regions that are above the maximum
reservation (instead of marking them as E820_UNUSABLE).  This allows
hotplug memory to be placed at these addresses.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23 14:20:03 +01:00
Andy Lutomirski
0a6d1fa0d2 x86/vdso: Remove runtime 32-bit vDSO selection
32-bit userspace will now always see the same vDSO, which is
exactly what used to be the int80 vDSO.  Subsequent patches will
clean it up and make it support SYSENTER and SYSCALL using
alternatives.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/e7e6b3526fa442502e6125fe69486aab50813c32.1444091584.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-07 11:34:08 +02:00
Malcolm Crossley
64c98e7f49 x86/xen: Do not clip xen_e820_map to xen_e820_map_entries when sanitizing map
Sanitizing the e820 map may produce extra E820 entries which would result in
the topmost E820 entries being removed. The removed entries would typically
include the top E820 usable RAM region and thus result in the domain having
signicantly less RAM available to it.

Fix by allowing sanitize_e820_map to use the full size of the allocated E820
array.

Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-28 18:03:38 +01:00
Juergen Gross
24f775a660 xen: use correct type for HYPERVISOR_memory_op()
HYPERVISOR_memory_op() is defined to return an "int" value. This is
wrong, as the Xen hypervisor will return "long".

The sub-function XENMEM_maximum_reservation returns the maximum
number of pages for the current domain. An int will overflow for a
domain configured with 8TB of memory or more.

Correct this by using the correct type.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-28 14:48:52 +01:00
Juergen Gross
626d750866 xen: switch extra memory accounting to use pfns
Instead of using physical addresses for accounting of extra memory
areas available for ballooning switch to pfns as this is much less
error prone regarding partial pages.

Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08 16:28:06 +01:00
Juergen Gross
cb9e444b5a xen: limit memory to architectural maximum
When a pv-domain (including dom0) is started it tries to size it's
p2m list according to the maximum possible memory amount it ever can
achieve. Limit the initial maximum memory size to the architectural
limit of the hardware in order to avoid overflows during remapping
of memory.

This problem will occur when dom0 is started with an initial memory
size being a multiple of 1GB, but without specifying it's maximum
memory size. The kernel must be configured without
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen.

Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08 16:28:05 +01:00
Juergen Gross
ab24507cfa xen: avoid another early crash of memory limited dom0
Commit b1c9f169047b ("xen: split counting of extra memory pages...")
introduced an error when dom0 was started with limited memory occurring
only on some hardware.

The problem arises in case dom0 is started with initial memory and
maximum memory being the same. The kernel must be configured without
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. If all
of this is true and the E820 map of the machine is sparse (some areas
are not covered) then the machine might crash early in the boot
process.

An example E820 map triggering the problem looks like this:

[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf7fafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf7fb000-0x00000000cf95ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf960000-0x00000000cfb62fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfb63000-0x00000000cfd14fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfd15000-0x00000000cfd61fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfd62000-0x00000000cfd6cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfd6d000-0x00000000cfd6ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfd70000-0x00000000cfd70fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfd71000-0x00000000cfea8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfea9000-0x00000000cfeb9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfeba000-0x00000000cfecafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfecb000-0x00000000cfecbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfecc000-0x00000000cfedbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfedcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfedd000-0x00000000cfeddfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfede000-0x00000000cfee3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee4000-0x00000000cfef6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cfef7000-0x00000000cfefffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000020effffff] usable

In this case the area a0000-dffff isn't present in the map. This will
confuse the memory setup of the domain when remapping the memory from
such holes to populated areas.

To avoid the problem the accounting of to be remapped memory has to
count such holes in the E820 map as well.

Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08 16:28:04 +01:00
Juergen Gross
eafd72e016 xen: avoid early crash of memory limited dom0
Commit b1c9f169047b ("xen: split counting of extra memory pages...")
introduced an error when dom0 was started with limited memory.

The problem arises in case dom0 is started with initial memory and
maximum memory being the same and exactly a multiple of 1 GB. The
kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
for the problem to happen. In this case it will crash very early
during boot due to the virtual mapped p2m list not being large
enough to be able to remap any memory:

(XEN) Freed 304kB init memory.
mapping kernel into physical memory
about to get started...
(XEN) traps.c:459:d0v0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000]
(XEN) domain_crash_sync called from entry.S: fault at ffff82d080229a93 create_bounce_frame+0x12b/0x13a
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.5.2-pre  x86_64  debug=n Not tainted ]----
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff81d120cb>]
(XEN) RFLAGS: 0000000000000206   EM: 1 CONTEXT: pv guest (d0v0)
(XEN) rax: ffffffff81db2000   rbx: 000000004d000000   rcx: 0000000000000000
(XEN) rdx: 000000004d000000   rsi: 0000000000063000   rdi: 000000004d063000
(XEN) rbp: ffffffff81c03d78   rsp: ffffffff81c03d28   r8:  0000000000023000
(XEN) r9:  00000001040ff000   r10: 0000000000007ff0   r11: 0000000000000000
(XEN) r12: 0000000000063000   r13: 000000000004d000   r14: 0000000000000063
(XEN) r15: 0000000000000063   cr0: 0000000080050033   cr4: 00000000000006f0
(XEN) cr3: 0000000105c0f000   cr2: ffffc90000268000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81c03d28:
(XEN)   0000000000000000 0000000000000000 ffffffff81d120cb 000000010000e030
(XEN)   0000000000010006 ffffffff81c03d68 000000000000e02b ffffffffffffffff
(XEN)   0000000000000063 000000000004d063 ffffffff81c03de8 ffffffff81d130a7
(XEN)   ffffffff81c03de8 000000000004d000 00000001040ff000 0000000000105db1
(XEN)   00000001040ff001 000000000004d062 ffff8800092d6ff8 0000000002027000
(XEN)   ffff8800094d8340 ffff8800092d6ff8 00003ffffffff000 ffff8800092d7ff8
(XEN)   ffffffff81c03e48 ffffffff81d13c43 ffff8800094d8000 ffff8800094d9000
(XEN)   0000000000000000 ffff8800092d6000 00000000092d6000 000000004cfbf000
(XEN)   00000000092d6000 00000000052d5442 0000000000000000 0000000000000000
(XEN)   ffffffff81c03ed8 ffffffff81d185c1 0000000000000000 0000000000000000
(XEN)   ffffffff81c03e78 ffffffff810f8ca4 ffffffff81c03ed8 ffffffff8171a15d
(XEN)   0000000000000010 ffffffff81c03ee8 0000000000000000 0000000000000000
(XEN)   ffffffff81f0e402 ffffffffffffffff ffffffff81dae900 0000000000000000
(XEN)   0000000000000000 0000000000000000 ffffffff81c03f28 ffffffff81d0cf0f
(XEN)   0000000000000000 0000000000000000 0000000000000000 ffffffff81db82e0
(XEN)   0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)   ffffffff81c03f38 ffffffff81d0c603 ffffffff81c03ff8 ffffffff81d11c86
(XEN)   0300000100000032 0000000000000005 0000000000000020 0000000000000000
(XEN)   0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)   0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Domain 0 crashed: rebooting machine in 5 seconds.

This can be avoided by allocating aneough space for the p2m to cover
the maximum memory of dom0 plus the identity mapped holes required
for PCI space, BIOS etc.

Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-09-08 16:28:04 +01:00
Juergen Gross
cb3eb85013 xen: remove no longer needed p2m.h
Cleanup by removing arch/x86/xen/p2m.h as it isn't needed any more.

Most definitions in this file are used in p2m.c only. Move those into
p2m.c.

set_phys_range_identity() is already declared in
arch/x86/include/asm/xen/page.h, add __init annotation there.

MAX_REMAP_RANGES isn't used at all, just delete it.

The only define left is P2M_PER_PAGE which is moved to page.h as well.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:25 +01:00
Juergen Gross
c70727a5bc xen: allow more than 512 GB of RAM for 64 bit pv-domains
64 bit pv-domains under Xen are limited to 512 GB of RAM today. The
main reason has been the 3 level p2m tree, which was replaced by the
virtual mapped linear p2m list. Parallel to the p2m list which is
being used by the kernel itself there is a 3 level mfn tree for usage
by the Xen tools and eventually for crash dump analysis. For this tree
the linear p2m list can serve as a replacement, too. As the kernel
can't know whether the tools are capable of dealing with the p2m list
instead of the mfn tree, the limit of 512 GB can't be dropped in all
cases.

This patch replaces the hard limit by a kernel parameter which tells
the kernel to obey the 512 GB limit or not. The default is selected by
a configuration parameter which specifies whether the 512 GB limit
should be active per default for domUs (domain save/restore/migration
and crash dump analysis are affected).

Memory above the domain limit is returned to the hypervisor instead of
being identity mapped, which was wrong anyway.

The kernel configuration parameter to specify the maximum size of a
domain can be deleted, as it is not relevant any more.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:24 +01:00
Juergen Gross
70e6119955 xen: move p2m list if conflicting with e820 map
Check whether the hypervisor supplied p2m list is placed at a location
which is conflicting with the target E820 map. If this is the case
relocate it to a new area unused up to now and compliant to the E820
map.

As the p2m list might by huge (up to several GB) and is required to be
mapped virtually, set up a temporary mapping for the copied list.

For pvh domains just delete the p2m related information from start
info instead of reserving the p2m memory, as we don't need it at all.

For 32 bit kernels adjust the memblock_reserve() parameters in order
to cover the page tables only. This requires to memblock_reserve() the
start_info page on it's own.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:24 +01:00
Juergen Gross
4b9c15377f xen: check for initrd conflicting with e820 map
Check whether the initrd is placed at a location which is conflicting
with the target E820 map. If this is the case relocate it to a new
area unused up to now and compliant to the E820 map.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:22 +01:00
Juergen Gross
04414baab5 xen: check pre-allocated page tables for conflict with memory map
Check whether the page tables built by the domain builder are at
memory addresses which are in conflict with the target memory map.
If this is the case just panic instead of running into problems
later.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:21 +01:00
Juergen Gross
808fdb7193 xen: check for kernel memory conflicting with memory layout
Checks whether the pre-allocated memory of the loaded kernel is in
conflict with the target memory map. If this is the case, just panic
instead of run into problems later, as there is nothing we can do
to repair this situation.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:21 +01:00
Juergen Gross
9ddac5b724 xen: find unused contiguous memory area
For being able to relocate pre-allocated data areas like initrd or
p2m list it is mandatory to find a contiguous memory area which is
not yet in use and doesn't conflict with the memory map we want to
be in effect.

In case such an area is found reserve it at once as this will be
required to be done in any case.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:20 +01:00
Juergen Gross
e612b4a7db xen: check memory area against e820 map
Provide a service routine to check a physical memory area against the
E820 map. The routine will return false if the complete area is RAM
according to the E820 map and true otherwise.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:20 +01:00
Juergen Gross
5097cdf6ce xen: split counting of extra memory pages from remapping
Memory pages in the initial memory setup done by the Xen hypervisor
conflicting with the target E820 map are remapped. In order to do this
those pages are counted and remapped in xen_set_identity_and_remap().

Split the counting from the remapping operation to be able to setup
the needed memory sizes in time but doing the remap operation at a
later time. This enables us to simplify the interface to
xen_set_identity_and_remap() as the number of remapped and released
pages is no longer needed here.

Finally move the remapping further down to prepare relocating
conflicting memory contents before the memory might be clobbered by
xen_set_identity_and_remap(). This requires to not destroy the Xen
E820 map when the one for the system is being constructed.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:19 +01:00
Juergen Gross
69632ecfcd xen: move static e820 map to global scope
Instead of using a function local static e820 map in xen_memory_setup()
and calling various functions in the same source with the map as a
parameter use a map directly accessible by all functions in the source.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:18 +01:00
Juergen Gross
8f5b0c6398 xen: eliminate scalability issues from initial mapping setup
Direct Xen to place the initial P->M table outside of the initial
mapping, as otherwise the 1G (implementation) / 2G (theoretical)
restriction on the size of the initial mapping limits the amount
of memory a domain can be handed initially.

As the initial P->M table is copied rather early during boot to
domain private memory and it's initial virtual mapping is dropped,
the easiest way to avoid virtual address conflicts with other
addresses in the kernel is to use a user address area for the
virtual address of the initial P->M table. This allows us to just
throw away the page tables of the initial mapping after the copy
without having to care about address invalidation.

It should be noted that this patch won't enable a pv-domain to USE
more than 512 GB of RAM. It just enables it to be started with a
P->M table covering more memory. This is especially important for
being able to boot a Dom0 on a system with more than 512 GB memory.

Signed-off-by: Juergen Gross <jgross@suse.com>
Based-on-patch-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:18 +01:00
Juergen Gross
a3f5239650 x86/xen: add some __init and static annotations in arch/x86/xen/setup.c
Some more functions in arch/x86/xen/setup.c can be made "__init".
xen_ignore_unusable() can be made "static".

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-28 10:00:36 +00:00
Juergen Gross
3ba5c867ca x86/xen: use correct types for addresses in arch/x86/xen/setup.c
In many places in arch/x86/xen/setup.c wrong types are used for
physical addresses (u64 or unsigned long long). Use phys_addr_t
instead.

Use macros already defined instead of open coding them.

Correct some other type mismatches.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-28 10:00:10 +00:00
Juergen Gross
f0feed10aa x86/xen: cleanup arch/x86/xen/setup.c
Remove extern declarations in arch/x86/xen/setup.c which are either
not used or redundant. Move needed other extern declarations to
xen-ops.h

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-28 09:59:46 +00:00
Juergen Gross
9a17ad7f3d xen: check for zero sized area when invalidating memory
With the introduction of the linear mapped p2m list setting memory
areas to "invalid" had to be delayed. When doing the invalidation
make sure no zero sized areas are processed.

Signed-off-by: Juegren Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12 10:09:55 +00:00
Juergen Gross
e86f949667 xen: use correct type for physical addresses
When converting a pfn to a physical address be sure to use 64 bit
wide types or convert the physical address to a pfn if possible.

Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12 10:09:48 +00:00
David Vrabel
a97dae1a2e x86/xen: add extra memory for remapped frames during setup
If the non-RAM regions in the e820 memory map are larger than the size
of the initial balloon, a BUG was triggered as the frames are remaped
beyond the limit of the linear p2m.  The frames are remapped into the
initial balloon area (xen_extra_mem) but not enough of this is
available.

Ensure enough extra memory regions are added for these remapped
frames.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
2015-01-08 13:52:37 +00:00
David Vrabel
bc7142cf79 x86/xen: don't count how many PFNs are identity mapped
This accounting is just used to print a diagnostic message that isn't
very useful.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
2015-01-08 13:52:36 +00:00
Juergen Gross
76f0a486fa xen: annotate xen_set_identity_and_remap_chunk() with __init
Commit 5b8e7d8054 removed the __init
annotation from xen_set_identity_and_remap_chunk(). Add it again.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-08 10:55:30 +00:00
Juergen Gross
5b8e7d8054 xen: Delay invalidating extra memory
When the physical memory configuration is initialized the p2m entries
for not pouplated memory pages are set to "invalid". As those pages
are beyond the hypervisor built p2m list the p2m tree has to be
extended.

This patch delays processing the extra memory related p2m entries
during the boot process until some more basic memory management
functions are callable. This removes the need to create new p2m
entries until virtual memory management is available.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04 14:08:59 +00:00
Juergen Gross
1f3ac86b4c xen: Delay remapping memory of pv-domain
Early in the boot process the memory layout of a pv-domain is changed
to match the E820 map (either the host one for Dom0 or the Xen one)
regarding placement of RAM and PCI holes. This requires removing memory
pages initially located at positions not suitable for RAM and adding
them later at higher addresses where no restrictions apply.

To be able to operate on the hypervisor supported p2m list until a
virtual mapped linear p2m list can be constructed, remapping must
be delayed until virtual memory management is initialized, as the
initial p2m list can't be extended unlimited at physical memory
initialization time due to it's fixed structure.

A further advantage is the reduction in complexity and code volume as
we don't have to be careful regarding memory restrictions during p2m
updates.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04 14:08:48 +00:00
Martin Kelly
1ea644c8f9 x86/xen: panic on bad Xen-provided memory map
Panic if Xen provides a memory map with 0 entries. Although this is
unlikely, it is better to catch the error at the point of seeing the map
than later on as a symptom of some other crash.

Signed-off-by: Martin Kelly <martkell@amazon.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-10-23 16:24:02 +01:00