Commit Graph

473 Commits

Author SHA1 Message Date
Felipe Balbi
0b93a4c838 usb: dwc3: fix TRB completion when multiple TRBs are started
After commit 2ec2a8be (usb: dwc3: gadget:
always enable IOC on bulk/interrupt transfers)
we created a situation where it was possible to
hang a bulk/interrupt endpoint if we had more
than one pending request in our queue and they
were both started with a single Start Transfer
command.

The problems triggers because we had not enabled
Transfer In Progress event for those endpoints
and we were not able to process early giveback
of requests completed without LST bit set.

Fix the problem by finally enabling Xfer In Progress
event for all endpoint types, except control.

Fixes: 2ec2a8be (usb: dwc3: gadget: always
	enable IOC on bulk/interrupt transfers)
Cc: <stable@vger.kernel.org> # v3.14+
Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05 09:16:55 -05:00
Felipe Balbi
81a60b7f5c usb: dwc3: omap: fix ordering for runtime pm calls
we don't to gate clocks until our children are
done with their remove path.

Fixes: af310e9 (usb: dwc3: omap: use runtime API's to enable clocks)
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 16:50:44 -05:00
Felipe Balbi
dc99f16f07 usb: dwc3: core: fix ordering for PHY suspend
We can't suspend the PHYs before dwc3_core_exit_mode()
has been called, that's because the host and/or device
sides might still need to communicate with the far end
link partner.

Fixes: 8ba007a (usb: dwc3: core: enable the USB2 and USB3 phy in probe)
Cc: <stable@vger.kernel.org> # v3.9+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 16:50:44 -05:00
Felipe Balbi
fed33afce0 usb: dwc3: core: fix order of PM runtime calls
Currently, we disable pm_runtime before all register
accesses are done, this is dangerous and might lead
to abort exceptions due to the driver trying to access
a register which is clocked by a clock which was long
gated.

Fix that by moving pm_runtime_put_sync() and pm_runtime_disable()
as the last thing we do before returning from our ->remove()
method.

Fixes: 72246da (usb: Introduce DesignWare USB3 DRD Driver)
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 16:50:44 -05:00
Zhuang Jin Can
fdee4ebac9 usb: dwc3: gadget: Fix desc NULL pointer in dwc3_gadget_ep_queue()
dep->endpoint.desc is checked at the beginning of
dwc3_gadget_ep_queue(), but after that it may be set to NULL
by another thread and then accessed again in dwc3_gadget_ep_queue().
This will lead to kernel oops.

Expand spinlock protection area to aviod race condition.

Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Jiebing Li <jiebing.li@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-03 15:15:55 -05:00
Dan Carpenter
788b0bc465 usb: dwc3: omap: signedness bug in dwc3_omap_set_utmi_mode()
"ret" should be signed.  It's only used for zero and negative error
codes.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-19 09:24:48 -05:00
Greg Kroah-Hartman
61fe2d75f1 usb: patches for v3.17 merge window
Surprisingly enough, while a big set of patches, the majority is
 composed of cleanups (using devm_*, fixing sparse errors, moving
 code around, adding const, etc).
 
 The highlights are addition of new support for PLX USB338x devices,
 and support for USB 2.0-only configurations of the DWC3 IP core.
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTzTI9AAoJEIaOsuA1yqREIqcQAJbwMaDb5sp8dWst+nL1Vo8N
 08bhOOM+o2KLiIBSNQh1hYtujpa06RSQMiNYZ7F/+R4Q3OAoq+uC0dD69TLEQ3Sd
 1xi0UgUTAvtXo13TToRjIi0mYywrrkZ91Maqff5jZKdslOY4ZfAScpUQHyD3i1UO
 JNUqpayYAnp8JJIGQ8CG1wAeJh/J8JH3O607vaknKVjds+WMkeC5ubnuV4sgVw71
 8JTwxk22EkMTr2MKhHjZwcv016NMEvziinWVoTXcWN2Uwk42Dn1nhfaYWSvg7kZE
 8/3t6zzdFMdoeeTEn2xXIQGTjbHW0sBS5+S+6PAon2YbjS3x40cbyLJnZ+KoVXog
 iHDKAl5w53gd/7qMiv57dW+HRP0M7/m2iy/owIrY8H8DkM3uwFevaeq/G2raJKmA
 frB1k95bSyypN7wVkALYv4nurP5+d7ERy9hPj/49M5giJXPpEIbgKN2qGdafaEx7
 xzAI+GqYrFtmmg25+f6AQRicVczQNMCdDT8HPZ04099Z2JVY/4uOoqTl29CePMgo
 OXeQ45ECMoJuRSwpF56e8h+qmsXp6WD31IhlcHseTvUvFu0Ex4SgUJhFP2UaF9WP
 aOqz0w36yX/ME3VhQk9YImNqGoqEk6fYHIHhxfdDugt0n68+M56EiiwtKvd5v5BI
 hCJAMBrv+WCGnJvWunVW
 =aJY4
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.17 merge window

Surprisingly enough, while a big set of patches, the majority is
composed of cleanups (using devm_*, fixing sparse errors, moving
code around, adding const, etc).

The highlights are addition of new support for PLX USB338x devices,
and support for USB 2.0-only configurations of the DWC3 IP core.

Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-07-21 11:33:41 -07:00
George Cherian
025b431b0e usb: dwc3: omap: add dwc3_omap_extcon_register function
Move the extcon related code to its own function.
Improve code readability, decrease the dwc3_probe() size.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16 09:57:11 -05:00
George Cherian
d2f0cf89ca usb: dwc3: omap: add dwc3_omap_set_utmi_mode() function
Move find and set the utmi mode to its own separate function.
Improve code readability, decrease the dwc3_probe() size.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16 09:57:01 -05:00
George Cherian
30fef1a97f usb: dwc3: omap: add dwc3_omap_map_offset() function
Move map offset to its own separate function.
Improve code readability, decrease the dwc3_probe() size.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16 09:56:49 -05:00
George Cherian
ca632a0d2f usb: dwc3: omap: remove x_major calculation from revision register
Remove the x_major calculation logic from the wrapper revision register
to differentiate between OMAP5 and AM437x. This was done to find the
register offsets of wrapper register. Now that We do it using dt
compatible, remove the whole logic.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-16 09:35:30 -05:00
Jingoo Han
029d97ff54 usb: dwc3: gadget: remove unnecessary 'start_new' variable
Remove 'start_new' variable from dwc3_endpoint_transfer_complete(),
since this variable has not been used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-10 08:44:25 -05:00
Pratyush Anand
b2f463e130 dwc3: host: Enable USB3 LPM capability
All dwc3 based xhci host controller supports USB3.0 LPM functionality.
Therefore enable it in platform data for all dwc3 based xhci device if
DWC3_HOST_USB3_LPM_ENABLE is selected in Kconfig.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-of-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 15:41:34 -07:00
Paul Zimmerman
0e1e5c47f7 usb: dwc3: add support for USB 2.0-only core configuration
Newer DWC3 controllers can be built for USB 2.0-only mode, where
most of the USB 3.0 circuitry is left out. To support this mode,
the driver must limit the speed programmed into the DCFG register
to Hi-Speed or lower.

Reads and writes to the PIPECTL register are left as-is, since
they should be no-ops in USB 2.0-only mode. Calls to phy_init()
etc. for the USB3 phy are also left as-is, since the no-op USB3
phy should be used for USB 2.0-only mode controllers.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30 12:28:08 -05:00
Vivek Gautam
f32a5e2325 usb: dwc3: Keeping 'resource' related code together
Putting together the code related to getting the 'IORESOURCE_MEM'
and assigning the same to dwc->xhci_resources, for increasing
the readability.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30 12:26:36 -05:00
George Cherian
02dae36aa6 usb: dwc3: dwc3-omap: Disable/Enable only wrapper interrupts in prepare/complete
The dwc3 wrapper driver should not be fiddling with the core interrupts.
Disabling the core interrupts in prepare stops xhci from proper operation.
So remove disable/enable of core interrupts from prepare/complete.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19 10:06:45 -05:00
George Cherian
c5a1fbca6f usb: dwc3: dwc3-omap: Fix the crash on module removal
Following crash is seen on dwc3_omap removal
Unable to handle kernel NULL pointer dereference at virtual address 00000018
pgd = ec098000
[00000018] *pgd=ad1f9831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in: usb_f_ss_lb g_zero usb_f_acm u_serial usb_f_ecm u_ether libcomposite configfs snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_hwdep snd_soc_omap snd_pcm_dmaengine snd_soc_core snd_compress snd_pcm snd_tim]
CPU: 0 PID: 1296 Comm: rmmod Tainted: G        W     3.15.0-rc4-02716-g95c4e18-dirty #10
task: ed05a080 ti: ec368000 task.ti: ec368000
PC is at release_resource+0x14/0x7c
LR is at release_resource+0x10/0x7c
pc : [<c0044724>]    lr : [<c0044720>]    psr: 60000013
sp : ec369ec0  ip : 60000013  fp : 00021008
r10: 00000000  r9 : ec368000  r8 : c000e7a4
r7 : 00000081  r6 : bf0062c0  r5 : ed7cd000  r4 : ed7d85c0
r3 : 00000000  r2 : 00000000  r1 : 00000011  r0 : c086d08c
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: ac098059  DAC: 00000015
Process rmmod (pid: 1296, stack limit = 0xec368248)
Stack: (0xec369ec0 to 0xec36a000)
9ec0: 00000000 00000001 ed7cd000 c034de94 ed7cd010 ed7cd000 00000000 c034e194
9ee0: 00000000 bf0062cc ed7cd010 c03490b0 ed154cc0 ed4c2570 ed2b8410 ed156810
ed156810 bf006d24 c034db9c c034db84 c034c518
9f20: bf006d24 ed156810 bf006d24 c034cd2c bf006d24 bf006d68 00000800 c034c340
9f40: 00000000 c00a9e5c 00000020 00000000 bf006d68 00000800 ec369f4c 33637764
9f60: 616d6f5f 00000070 00000001 ec368000 ed05a080 c000e670 00000001 c0084010
9f80: 00021088 00000800 00021088 00000081 80000010 0000e6f4 00021088 00000800
9fa0: 00021088 c000e5e0 00021088 00000800 000210b8 00000800 e04f6d00 e04f6d00
9fc0: 00021088 00000800 00021088 00000081 00000001 00000000 be91de08 00021008
9fe0: 4d768880 be91dbb4 b6fc5984 4d76888c 80000010 000210b8 00000000 00000000
[<c0044724>] (release_resource) from [<c034de94>] (platform_device_del+0x6c/0x9c)
[<c034de94>] (platform_device_del) from [<c034e194>] (platform_device_unregister+0xc/0x18)
[<c034e194>] (platform_device_unregister) from [<bf0062cc>] (dwc3_omap_remove_core+0xc/0x14 [dwc3_omap])
[<bf0062cc>] (dwc3_omap_remove_core [dwc3_omap]) from [<c03490b0>] (device_for_each_child+0x34/0x74)
[<c03490b0>] (device_for_each_child) from [<bf0062b4>] (dwc3_omap_remove+0x6c/0x78 [dwc3_omap])
[<bf0062b4>] (dwc3_omap_remove [dwc3_omap]) from [<c034db9c>] (platform_drv_remove+0x18/0x1c)
[<c034db9c>] (platform_drv_remove) from [<c034c518>] (__device_release_driver+0x70/0xc8)
[<c034c518>] (__device_release_driver) from [<c034cd2c>] (driver_detach+0xb4/0xb8)
[<c034cd2c>] (driver_detach) from [<c034c340>] (bus_remove_driver+0x4c/0x90)
[<c034c340>] (bus_remove_driver) from [<c00a9e5c>] (SyS_delete_module+0x10c/0x198)
[<c00a9e5c>] (SyS_delete_module) from [<c000e5e0>] (ret_fast_syscall+0x0/0x48)
Code: e1a04000 e59f0068 eb14505e e5943010 (e5932018)
---[ end trace 7e2a8746ff4fc811 ]---
Segmentation fault

[ balbi@ti.com : add CONFIG_OF dependency ]

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19 10:06:28 -05:00
Zhuang Jin Can
5cd8c48d95 usb: dwc3: gadget: check link trb after free_slot is increased
In ISOC transfers, when free_slot points to the last TRB (i.e. Link
TRB), and all queued requests meet Missed Interval Isoc error, busy_slot
points to trb0.
	busy_slot->trb0
		   trb1
		   ...
	free_slot->trb31(Link TRB)

After end transfer and receiving the XferNotReady event, trb_left is
caculated as 1 which is wrong, and no TRB will be primed to the
endpoint.

The root cause is free_slot is not increased the same way as busy_slot.
When busy_slot is increased by one, it checks if points to a link TRB
after increasement, but free_slot checks it before increasement.
free_slot should behave the same as busy_slot to make the trb_left
caculation correct.

Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Jiebing Li <jiebing.li@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-19 08:51:07 -05:00
Greg Kroah-Hartman
f8712528ae usb: patches for v3.16 merge window
Not a lot here during this merge window. Mostly we just have
 the usual miscellaneous patches (removal of unnecessary prints,
 proper dependencies being added to Kconfig, build warning fixes,
 new device ID, etc.
 
 Other than those, the only important new features are the
 new support for OS Strings which should help Linux Gadget
 Drivers behave better under MS Windows. Also Babble Recovery
 implementation for MUSB on AM335x. Lastly, we also have
 ARCH_QCOM PHY support though phy-msm.
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTfSbVAAoJEIaOsuA1yqREGU0P/RthhfwpHVOKREnWFvUnRcNn
 MAPX1sv11gJiEs2Oe70/9YPL3ZLeV05mBgHoNUjyK5281TK9LDsUW8WwGLKbfe1u
 5JsOC+Gmk7aFMCwGfQQKVZpy4UNikpa517Bg+m9oY37rjT2BMsP32Sq1KbD47q1q
 0Ybn8iR0ZPAUDnpFc7OKyL9Ocko+AsQo1jmoR1epmhiByfDgzMPPIyE4MLv1SPXi
 VvuuWWknTD6xev9m9ELVTo+Or/RNabi04DVOBRV2Qa5csKvkILrBpnCpR0fMTlQ8
 ks8Zt0Fnwsre8/L/+HQj+2uOH3w+BDbe9qoVbkmkugZpFvrY0uFGrgGiqt8YOdiL
 mQAE+/8lOgnUU5YRTr38h0yIZ1JTHGP1yv9YZwatk65bp2R6o5k5ejf1WnzRqUhy
 HvXtILwZZiYknCCdPPEkyqpWEk8NcrLudw2k0EfU3q8JJnHeX+U4YNPhcFkjKido
 Oo+SES09gmh+UHAtC1EOtHYs8boNKhe58hL5FzyyKV8zbM2SXmYoDLyBsVyOQQJQ
 lDMKhS1+n8QLqBjZ2lypOqLuesHjk+E5iOjrXQZaEfA5eqUxaGezxOdbMkWwPLoS
 yKR/tMQ7+OVn8yKhfIyVuzFwQkxc2p4gXtsyDwui6qVVlSrim2+14d2lv5FGVZ48
 N8SCQis+ik6tShPOqccH
 =Q1jA
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.16 merge window

Not a lot here during this merge window. Mostly we just have
the usual miscellaneous patches (removal of unnecessary prints,
proper dependencies being added to Kconfig, build warning fixes,
new device ID, etc.

Other than those, the only important new features are the
new support for OS Strings which should help Linux Gadget
Drivers behave better under MS Windows. Also Babble Recovery
implementation for MUSB on AM335x. Lastly, we also have
ARCH_QCOM PHY support though phy-msm.

Signed-of-by: Felipe Balbi <balbi@ti.com>

Conflicts:
	drivers/usb/phy/phy-mv-u3d-usb.c
2014-05-23 11:28:21 +09:00
Andy Shevchenko
f1c7e71081 usb: dwc3: convert to pcim_enable_device()
This fixes a bug when dwc3_pci_register_phys() fails and leaves device enabled.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:26:38 -05:00
Andy Shevchenko
b09e99ee7c usb: dwc3: no need to initialize ret variable
First usage of ret variable will re-write initial value. Thus, there is no need
to initialize it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:26:21 -05:00
Felipe Balbi
427c3df684 usb: dwc3: gadget: pretty print Generic CMDs
this makes it slightly easier to read generic CMD
logs. It also helps make sure we're sending proper
parameters for each command.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25 14:22:00 -05:00
Felipe Balbi
e57ebc1db6 usb: dwc3: gadget: pretty print link states
this makes it slightly easier to read link state
change interrupt logs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25 14:21:25 -05:00
Felipe Balbi
40cc57c71b usb: dwc3: gadget: print both cmd string and number
That way it's easy for humans looking at dmesg
and humans(?) looking at Databooks.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-25 14:10:02 -05:00
Vivek Gautam
bd8ce544ec usb: dwc3: exynos: Make provision for vdd regulators
Facilitate getting required 3.3V and 1.0V VDD supply for
DWC3 controller on Exynos.

With patches for regulators' nodes merged in 3.15:
c8c253f ARM: dts: Add regulator entries to smdk5420
275dcd2 ARM: dts: add max77686 pmic node for smdk5250,

certain perripherals will now need to ensure that,
they request VDD regulators in their drivers, and enable
them so as to make them working.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21 14:07:30 -05:00
Jean Delvare
aea8928aba usb: dwc3: add glue layer dependencies
Glue layers for the DWC3 driver only make sense on specific platforms.
Add dependencies so that they are not built where they aren't needed.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: WingMan Kwok <w-kwok2@ti.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21 14:07:29 -05:00
Felipe Balbi
d7078df6be usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
now that all functions match the driver name,
the only missing piece is to rename the header
file itself.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21 14:07:24 -05:00
Felipe Balbi
4525beeb9a usb: phy: rename usb_nop_xceiv to usb_phy_generic
no functional changes, just renaming the function
in order to make it slightly clearer what it should
be used for, also matching the driver name.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21 14:07:24 -05:00
Felipe Balbi
5f94adfeed usb: dwc3: core: refactor mode initialization to its own function
Move mode (Host, Peripheral, OTG) initialization
to its own function in order to decrease the size
of our probe() routine.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21 10:53:01 -05:00
Felipe Balbi
3c9f94aca6 usb: dwc3: core: refactor PHY initialization
our probe() routine is too large and we can
easily refactor PHY-related code out to another
function to make it slightly less painful to read.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16 15:08:29 -05:00
Felipe Balbi
687ef9817d usb: dwc3: gadget: clear stall when disabling endpoint
so it seems like DWC3 IP doesn't clear stalls
automatically when we disable an endpoint, because
of that, we _must_ make sure stalls are cleared
before clearing the proper bit in DALEPENA register.

Cc: <stable@vger.kernel.org> # v3.4+
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16 10:30:33 -05:00
Roger Quadros
f45e5f00da usb: dwc3: core: Fix gadget for system suspend/resume
During system resume, if the event buffers are not setup before
the gadget controller starts then we start with invalid context
and this can lead to bus access errors. This is especially true for
platforms that loose the controller context during system suspend.
e.g. AM437x.

The following backtrace was found when the system is suspended
and resumed with g_zero loaded on AM437x-evm (USB cable connected
to host all the while).

[  120.981506] WARNING: CPU: 0 PID: 1656 at drivers/bus/omap_l3_noc.c:137 l3_interrupt_handler+0x198/0x28c()
[  120.981514] L3 custom error: MASTER:USB0 WR TARGET:GPMC
[  120.981638] Modules linked in: g_mass_storage usb_f_mass_storage libcomposite configfs bufferclass_ti(O) omaplfb(O) cryptodev(O) dwc3 snd_soc_evm snd_soc_omap snd_pe
[  120.981659] CPU: 0 PID: 1656 Comm: sh Tainted: G           O 3.12.10-gc559824 #1
[  120.981669] Backtrace:
[  120.981705] [<c0017880>] (dump_backtrace+0x0/0x10c) from [<c0017a1c>] (show_stack+0x18/0x1c)
[  120.981730]  r6:c02819ac r5:00000009 r4:ec137cb8 r3:00000000
[  120.981767] [<c0017a04>] (show_stack+0x0/0x1c) from [<c056c0b0>] (dump_stack+0x20/0x28)
[  120.981802] [<c056c090>] (dump_stack+0x0/0x28) from [<c0046d08>] (warn_slowpath_common+0x70/0x90)
[  120.981830] [<c0046c98>] (warn_slowpath_common+0x0/0x90) from [<c0046dcc>] (warn_slowpath_fmt+0x38/0x40)
[  120.981856]  r8:c0855eb0 r7:00000002 r6:f1000700 r5:00000007 r4:80080003
[  120.981886] [<c0046d94>] (warn_slowpath_fmt+0x0/0x40) from [<c02819ac>] (l3_interrupt_handler+0x198/0x28c)
[  120.981900]  r3:c0801ab8 r2:c06cb354
[  120.981936] [<c0281814>] (l3_interrupt_handler+0x0/0x28c) from [<c007162c>] (handle_irq_event_percpu+0x54/0x1b8)
[  120.981962] [<c00715d8>] (handle_irq_event_percpu+0x0/0x1b8) from [<c00717c0>] (handle_irq_event+0x30/0x40)
[  120.981993] [<c0071790>] (handle_irq_event+0x0/0x40) from [<c0074058>] (handle_fasteoi_irq+0x74/0x128)
[  120.982006]  r4:ed0056c0 r3:00000000
[  120.982033] [<c0073fe4>] (handle_fasteoi_irq+0x0/0x128) from [<c0070f34>] (generic_handle_irq+0x28/0x38)
[  120.982046]  r4:0000002a r3:c0073fe4
[  120.982085] [<c0070f0c>] (generic_handle_irq+0x0/0x38) from [<c0015560>] (handle_IRQ+0x38/0x8c)
[  120.982098]  r4:c080137c r3:00000182
[  120.982124] [<c0015528>] (handle_IRQ+0x0/0x8c) from [<c00087e0>] (gic_handle_irq+0x30/0x5c)
[  120.982145]  r6:ec137dd0 r5:c07ac480 r4:fa24010c r3:00000100
[  120.982169] [<c00087b0>] (gic_handle_irq+0x0/0x5c) from [<c056fcc0>] (__irq_svc+0x40/0x54)
[  120.982179] Exception stack(0xec137dd0 to 0xec137e18)
[  120.982195] 7dc0:                                     00000000 a00001d3 00000000 00000004
[  120.982216] 7de0: a0000153 ec1d9010 c080de90 ec137e30 c080debc 00000000 ed756e44 ec137e2c
[  120.982232] 7e00: ec137de0 ec137e18 bf1150e4 bf115474 60000153 ffffffff
[  120.982253]  r7:ec137e04 r6:ffffffff r5:60000153 r4:bf115474
[  120.982327] [<bf115438>] (dwc3_complete+0x0/0x40 [dwc3]) from [<c0338f50>] (dpm_complete+0xd4/0x19c)
[  120.982341]  r5:ed756e10 r4:ed756e64
[  120.982370] [<c0338e7c>] (dpm_complete+0x0/0x19c) from [<c0339034>] (dpm_resume_end+0x1c/0x20)
[  120.982400] [<c0339018>] (dpm_resume_end+0x0/0x20) from [<c006d4ec>] (suspend_devices_and_enter+0x118/0x33c)
[  120.982412]  r4:c0833da4 r3:00000000
[  120.982436] [<c006d3d4>] (suspend_devices_and_enter+0x0/0x33c) from [<c006d928>] (pm_suspend+0x218/0x254)
[  120.982458] [<c006d710>] (pm_suspend+0x0/0x254) from [<c006c594>] (state_store+0x70/0xc0)
[  120.982478]  r6:c057a6cc r5:c06a8320 r4:00000003 r3:0000006d
[  120.982515] [<c006c524>] (state_store+0x0/0xc0) from [<c0264cc0>] (kobj_attr_store+0x1c/0x28)
[  120.982546] [<c0264ca4>] (kobj_attr_store+0x0/0x28) from [<c012ccb8>] (sysfs_write_file+0x170/0x1a4)
[  120.982583] [<c012cb48>] (sysfs_write_file+0x0/0x1a4) from [<c00d17e4>] (vfs_write+0xb8/0x190)
[  120.982611] [<c00d172c>] (vfs_write+0x0/0x190) from [<c00d1bf8>] (SyS_write+0x44/0x78)
[  120.982641] [<c00d1bb4>] (SyS_write+0x0/0x78) from [<c0014660>] (ret_fast_syscall+0x0/0x30)

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16 10:11:45 -05:00
Jack Pham
32702e96a9 usb: dwc3: gadget: Iterate only over valid endpoints
Make dwc3_gadget_resize_tx_fifos() iterate only over IN
endpoints that are actually present, based on the
num_in_eps parameter. This terminates the loop so as to
prevent dereferencing a potential NULL dwc->eps[i] where
i >= (num_in_eps + num_out_eps).

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16 10:11:45 -05:00
Linus Torvalds
3e75c6de1a USB patches for 3.15-rc1
Here's the big USB pull request for 3.15-rc1.
 
 The normal set of patches, lots of controller driver updates, and a
 smattering of individual USB driver updates as well.
 
 All have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlM7AbcACgkQMUfUDdst+ymbZACgncdbZyPsVZ7ZUpBFNbO/vBVT
 T9UAmwciojEzjh7b+x4ylsWH+O3LWVN3
 =RpAF
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg KH:
 "Here's the big USB pull request for 3.15-rc1.

  The normal set of patches, lots of controller driver updates, and a
  smattering of individual USB driver updates as well.

  All have been in linux-next for a while"

* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
  xhci: Transition maintainership to Mathias Nyman.
  USB: disable reset-resume when USB_QUIRK_RESET is set
  USB: unbind all interfaces before rebinding any
  usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
  usb: gadget: tcm_usb_gadget: stop format strings
  usb: gadget: f_fs: add missing spinlock and mutex unlock
  usb: gadget: composite: switch over to ERR_CAST()
  usb: gadget: inode: switch over to memdup_user()
  usb: gadget: f_subset: switch over to PTR_RET
  usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
  USB: keyspan: remove dead debugging code
  USB: serial: add missing newlines to dev_<level> messages.
  USB: serial: add missing braces
  USB: serial: continue to write on errors
  USB: serial: continue to read on errors
  USB: serial: make bulk_out_size a lower limit
  USB: cypress_m8: fix potential scheduling while atomic
  devicetree: bindings: document lsi,zevio-usb
  usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
  usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
  ...
2014-04-01 17:06:09 -07:00
Chanwoo Choi
1ad94ffef2 extcon: Move OF helper function to extcon core and change function name
This patch move simply OF helper function to extcon core and change function
name as following:
- of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle()

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
2014-03-19 14:41:58 +09:00
Dan Carpenter
3f89204bae usb: dwc3: gadget: remove known conditions
We know what "value" is and it upsets static checkers that we appear to
have doubts about it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-07 10:03:24 -06:00
Dan Carpenter
73a30bfc0d usb: dwc3: gadget: cut and paste fixups in suspend/resume
These were cut and paste from the ->disconnect function.

Fixes commit 30d577b9bcc4 ('usb: dwc3: gadget: call gadget driver's
->suspend/->resume')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-07 10:03:24 -06:00
Kishon Vijay Abraham I
57303488cd usb: dwc3: adapt dwc3 core to use Generic PHY Framework
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().

However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:05 -06:00
Kishon Vijay Abraham I
122f06e60f usb: dwc3: core: support optional PHYs
Since PHYs for dwc3 is optional (not all SoCs having PHYs for DWC3
should be programmed), do not return from probe if the USB PHY library
returns -ENODEV as that indicates the platform does not have a
programmable PHY.

While this can be considered as a temporary fix, a long term solution
would be to add 'nop' PHY for platforms that does not have programmable
PHY.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:05 -06:00
Felipe Balbi
dbf5aaf7ce usb: dwc3: define more revisions
few new revisions of the core have been released,
add them to our list of revisions so we can apply
workarounds if necessary.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:04 -06:00
Felipe Balbi
610183051d usb: dwc3: fix randconfig build errors
commit 388e5c5 (usb: dwc3: remove dwc3 dependency
on host AND gadget.) created the possibility for
host-only and peripheral-only dwc3 builds but
left a possible randconfig build error when host-only
builds are selected.

Cc: <stable@vger.kernel.org> # v3.8+
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:04 -06:00
Felipe Balbi
b997ada5db usb: dwc3: gadget: pre-start Stream transfers when they're queued
we need to pre-start stream transfers otherwise we
will never know when to start them.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Felipe Balbi
bc5ba2e0b8 usb: dwc3: gadget: call gadget driver's ->suspend/->resume
When going into bus suspend/resume we _must_
call gadget driver's ->suspend/->resume callbacks
accordingly. This patch implements that very feature
which has been missing forever.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Paul Zimmerman
b992e6813e usb: dwc3: gadget: add 'force' argument to stop_active_transfer
It's not always we need to force a transfer to be removed
from the core's internal cache. This extra argument will
help differentiating those two cases.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Felipe Balbi
356363bf6b usb: dwc3: gadget: make sure HIRD threshold is 0 in superspeed
During superspeed, HIRD threshold should always
be zero. Curent driver wasn't making sure that
was the case.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:03 -06:00
Felipe Balbi
7b2a0368bb usb: dwc3: gadget: set KEEP_CONNECT in case of hibernation
if we have hibernation configured, Databook
instructs us to set KEEP_CONNECT bit together
with RUN_STOP bit, in step 9 of section 12.3.6.1
Initialization for Hibernation Support.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:02 -06:00
Felipe Balbi
835fadb40c usb: dwc3: core: fix indentation
no functional changes, just converting spaces
into tab.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:40:02 -06:00
Felipe Balbi
0ffcaf3798 usb: dwc3: core: allocate scratch buffers
We must read HWPARAMS4 register to figure out
how many scratch buffers we should allocate.

Later patch will use "Set Scratchpad Buffer
Array" command to pass the pointer to the
IP so it can be used during hibernation.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 14:39:55 -06:00
Paul Zimmerman
265b70a73a usb: dwc3: gadget: add a 'restore' argument to set_ep_config
That argument will be used in later patches when we
have working hibernation support. For now, always
pass it as false.

The idea of this patch is to decrease to size of
following patches and slowly add hibernation building
blocks to the gadget side of dwc3 so that it becomes
very easy to review the actual hibernation code.

[ balbi@ti.com : rewrote patch on top of current
	tree. Added commit log. ]

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 09:44:52 -06:00
Paul Zimmerman
911f1f88ca usb: dwc3: gadget: implement dwc3_gadget_get_link_state
This function will be used during hibernation to get
the current link state. It will be needed at least
for Hibernation support.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-03-05 09:44:51 -06:00