The variables msg_data and spad_data are being initialized with values
that are never read, they are being updated later on. The initializations
are redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present
in packet's header, reset it to 0. Then restore it back if packet
processing wasn't completed. Instead of bool variable for each
flag, bit mask variable was added: it has logical OR of 'MSG_EOR'
and 'MSG_EOM' if needed, to restore flags, this variable is ORed
with flags field of packet.
Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Link: https://lore.kernel.org/r/20210903123238.3273526-1-arseny.krasnov@kaspersky.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Multiqueue support requires additional virtio_net_q objects to be added
or removed per the configured number of queue pairs. In addition the RQ
tables needs to be modified to match the number of configured receive
queues so the packets are dispatched to the right virtqueue according to
the hash result.
Note: qemu v6.0.0 is broken when the device requests more than two data
queues; no net device will be created for the vdpa device. To avoid
this, one should specify mq=off to qemu. In this case it will end up
with a single queue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-7-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to handle control virtqueue configurations per virtio
specification. The control virtqueue is implemented in software and no
hardware offloading is involved.
Control VQ configuration need task context, therefore all configurations
are handled in a workqueue created for the purpose.
Modifications are made to the memory registration code to allow for
saving a copy of itolb to be used by the control VQ to access the vring.
The max number of data virtqueus supported by the driver has been
updated to 2 since multiqueue is not supported at this stage and we need
to ensure consistency of VQ indices mapping to either data or control
VQ.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following patches add control virtuqeue and multiqueue support. We want
to verify that the index value to callbacks referencing a virtqueue is
valid.
The logic defining valid indices is as follows:
CVQ clear: 0 and 1.
CVQ set, MQ clear: 0, 1 and 2
CVQ set, MQ set: 0..nvq where nvq is whatever provided to
_vdpa_register_device()
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead, define an array of struct vdpa_callback on struct mlx5_vdpa_net
and use it to store callbacks for any virtqueue provided. This is
required due to the fact that callback configurations arrive before feature
negotiation. With control VQ and multiqueue introduced next we want to
save the information until after feature negotiation where we know the
CVQ index.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use struct mlx5_vdpa_dev as an argument to setup_driver() and a few
others in preparation to control virtqueue support in a subsequent
patch. The control virtqueue is part of struct mlx5_vdpa_dev so this is
required.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210823052123.14909-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit implements the management netlink framework for ifcvf,
including register and add / remove a device
It works with iproute2:
[root@localhost lszhu]# vdpa mgmtdev show -jp
{
"mgmtdev": {
"pci/0000:01:00.5": {
"supported_classes": [ "net" ]
},
"pci/0000:01:00.6": {
"supported_classes": [ "net" ]
}
}
}
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.5 name vdpa0
[root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.6 name vdpa1
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210812032454.24486-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Recent work on converting address list to a tree made it obvious
we need an abstraction around writing netdev->dev_addr. Without
such abstraction updating the main device address is invisible
to the core.
Introduce a number of helpers which for now just wrap memcpy()
but in the future can make necessary changes to the address
tree.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Bug fixes
This series includes 3 fixes related to devlink firmware and chip
versions. The other 2 patches fix a UDP tunneling issue and an
error recovery issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If error recovery is already enabled, bnxt_timer() will periodically
check the heartbeat register and the reset counter. If we get an
error recovery async. notification from the firmware (e.g. change in
primary/secondary role), we will immediately read and update the
heartbeat register and the reset counter. If the timer for the next
health check expires soon after this, we may read the heartbeat register
again in quick succession and find that it hasn't changed. This will
trigger error recovery unintentionally.
The likelihood is small because we also reset fw_health->tmr_counter
which will reset the interval for the next health check. But the
update is not protected and bnxt_timer() can miss the update and
perform the health check without waiting for the full interval.
Fix it by only reading the heartbeat register and reset counter in
bnxt_async_event_process() if error recovery is trasitioning to the
enabled state. Also add proper memory barriers so that when enabling
for the first time, bnxt_timer() will see the tmr_counter interval and
perform the health check after the full interval has elapsed.
Fixes: 7e914027f7 ("bnxt_en: Enable health monitoring.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current logic assumes that when the driver sends the message to the
firmware to add the VXLAN or Geneve port, the firmware will never fail
the operation. The UDP ports are always stored and are used to check
the tunnel packets in .ndo_features_check(). These tunnnel packets
will fail to offload on the transmit side if firmware fails the call to
add the UDP ports.
To fix the problem, bp->vxlan_port and bp->nge_port will only be set to
the offloaded ports when the HWRM_TUNNEL_DST_PORT_ALLOC firmware call
succeeds. When deleting a UDP port, we check that the port was
previously added successfuly first by checking the FW ID.
Fixes: 1698d600b3 ("bnxt_en: Implement .ndo_features_check().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current asic.rev is incomplete and does not include the metal
revision. Add the metal revision and decode the complete asic
revision into the more common and readable form (A0, B0, etc).
Fixes: 7154917a12 ("bnxt_en: Refactor bnxt_dl_info_get().")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
P5 devices store NVM arrays using a different internal representation.
This implementation detail permeates into the HWRM API, requiring the
caller to explicitly index the array elements in HWRM_NVM_GET_VARIABLE
on these devices. Conversely, older devices do not support the indexed
mode of operation and require reading the raw NVM content.
Fixes: db28b6c77f ("bnxt_en: Fix devlink info's stored fw.psid version format.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help
quantify improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf
script's python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script'
pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded
shared object introduced in v5.14) fixes and a 'perf test' entry
for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure
originally lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf
record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading various 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to
help with the multithreading effort.
- Optimize the generation of the arch specific erno tables used in
'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first
arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and
Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake
servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support"
* tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (130 commits)
perf tests: Add test for PMU aliases
perf pmu: Add PMU alias support
perf session: Report collisions in AUX records
perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
perf build: Report failure for testing feature libopencsd
perf cs-etm: Show a warning for an unknown magic number
perf cs-etm: Print the decoder name
perf cs-etm: Create ETE decoder
perf cs-etm: Update OpenCSD decoder for ETE
perf cs-etm: Fix typo
perf cs-etm: Save TRCDEVARCH register
perf cs-etm: Refactor out ETMv4 header saving
perf cs-etm: Initialise architecture based on TRCIDR1
perf cs-etm: Refactor initialisation of decoder params.
tools build: Fix feature detect clean for out of source builds
perf evlist: Add evlist__for_each_entry_from() macro
perf evsel: Handle precise_ip fallback in evsel__open_cpu()
perf evsel: Move bpf_counter__install_pe() to success path in evsel__open_cpu()
perf evsel: Move test_attr__open() to success path in evsel__open_cpu()
perf evsel: Move ignore_missing_thread() to fallback code
...
Pull tracing updates from Steven Rostedt:
- simplify the Kconfig use of FTRACE and TRACE_IRQFLAGS_SUPPORT
- bootconfig can now start histograms
- bootconfig supports group/all enabling
- histograms now can put values in linear size buckets
- execnames can be passed to synthetic events
- introduce "event probes" that attach to other events and can retrieve
data from pointers of fields, or record fields as different types (a
pointer to a string as a string instead of just a hex number)
- various fixes and clean ups
* tag 'trace-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (35 commits)
tracing/doc: Fix table format in histogram code
selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes
selftests/ftrace: Add selftest for testing eprobe events on synthetic events
selftests/ftrace: Add test case to test adding and removing of event probe
selftests/ftrace: Fix requirement check of README file
selftests/ftrace: Add clear_dynamic_events() to test cases
tracing: Add a probe that attaches to trace events
tracing/probes: Reject events which have the same name of existing one
tracing/probes: Have process_fetch_insn() take a void * instead of pt_regs
tracing/probe: Change traceprobe_set_print_fmt() to take a type
tracing/probes: Use struct_size() instead of defining custom macros
tracing/probes: Allow for dot delimiter as well as slash for system names
tracing/probe: Have traceprobe_parse_probe_arg() take a const arg
tracing: Have dynamic events have a ref counter
tracing: Add DYNAMIC flag for dynamic events
tracing: Replace deprecated CPU-hotplug functions.
MAINTAINERS: Add an entry for os noise/latency
tracepoint: Fix kerneldoc comments
bootconfig/tracing/ktest: Update ktest example for boot-time tracing
tools/bootconfig: Use per-group/all enable option in ftrace2bconf script
...
Pull ARC updates from Vineet Gupta:
"Finally a big pile of changes for ARC (atomics/mm). These are from our
internal arc64 tree, preparing mainline for eventual arc64 support.
I'm spreading them out to avoid tsunami of patches in one release.
- MM rework:
- Implement up to 4 paging levels
- Enable STRICT_MM_TYPECHECK
- switch pgtable_t back to 'struct page *'
- Atomics rework / implement relaxed accessors
- Retire legacy MMUv1,v2; ARC750 cores
- A few other build errors, typos"
* tag 'arc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (33 commits)
ARC: mm: vmalloc sync from kernel to user table to update PMD ...
ARC: mm: support 4 levels of page tables
ARC: mm: support 3 levels of page tables
ARC: mm: switch to asm-generic/pgalloc.h
ARC: mm: switch pgtable_t back to struct page *
ARC: mm: hack to allow 2 level build with 4 level code
ARC: mm: disintegrate pgtable.h into levels and flags
ARC: mm: disintegrate mmu.h (arcv2 bits out)
ARC: mm: move MMU specific bits out of entry code ...
ARC: mm: move MMU specific bits out of ASID allocator
ARC: mm: non-functional code movement/cleanup
ARC: mm: pmd_populate* to use the canonical set_pmd (and drop pmd_set)
ARC: ioremap: use more commonly used PAGE_KERNEL based uncached flag
ARC: mm: Enable STRICT_MM_TYPECHECKS
ARC: mm: Fixes to allow STRICT_MM_TYPECHECKS
ARC: mm: move mmu/cache externs out to setup.h
ARC: mm: remove tlb paranoid code
ARC: mm: use SCRATCH_DATA0 register for caching pgdir in ARCv2 only
ARC: retire MMUv1 and MMUv2 support
ARC: retire ARC750 support
...
Pull RISC-V updates from Palmer Dabbelt:
- support PC-relative instructions (auipc and branches) in kprobes
- support for forced IRQ threading
- support for the hlt/nohlt kernel command line options, via the
generic idle loop
- show the edge/level triggered behavior of interrupts
in /proc/interrupts
- a handful of cleanups to our address mapping mechanisms
- support for allocating gigantic hugepages via CMA
- support for the undefined behavior sanitizer (UBSAN)
- a handful of cleanups to the VDSO that allow the kernel to build with
LLD.
- support for hugepage migration
* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
riscv: add support for hugepage migration
RISC-V: Fix VDSO build for !MMU
riscv: use strscpy to replace strlcpy
riscv: explicitly use symbol offsets for VDSO
riscv: Enable Undefined Behavior Sanitizer UBSAN
riscv: Keep the riscv Kconfig selects sorted
riscv: Support allocating gigantic hugepages using CMA
riscv: fix the global name pfn_base confliction error
riscv: Move early fdt mapping creation in its own function
riscv: Simplify BUILTIN_DTB device tree mapping handling
riscv: Use __maybe_unused instead of #ifdefs around variable declarations
riscv: Get rid of map_size parameter to create_kernel_page_table
riscv: Introduce va_kernel_pa_offset for 32-bit kernel
riscv: Optimize kernel virtual address conversion macro
dt-bindings: riscv: add starfive jh7100 bindings
riscv: Enable GENERIC_IRQ_SHOW_LEVEL
riscv: Enable idle generic idle loop
riscv: Allow forced irq threading
riscv: Implement thread_struct whitelist for hardened usercopy
riscv: kprobes: implement the branch instructions
...
... but make it a config option so that broken environments can disable
it when required.
We really should always have a clean build, and will disable specific
over-eager warnings as required, if we can't fix them. But while I
fairly religiously enforce that in my own tree, it doesn't get enforced
by various build robots that don't necessarily report warnings.
So this just makes '-Werror' a default compiler flag, but allows people
to disable it for their configuration if they have some particular
issues.
Occasionally, new compiler versions end up enabling new warnings, and it
can take a while before we have them fixed (or the warnings disabled if
that is what it takes), so the config option allows for that situation.
Hopefully this will mean that I get fewer pull requests that have new
warnings that were not noticed by various automation we have in place.
Knock wood.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more USB updates from Greg KH:
"Here are some straggler USB-serial changes for 5.15-rc1.
These were not included in the first pull request as they came in
"late" from Johan and I had missed them in my pull request earlier
this week.
Nothing big in here, just some USB to serial driver updates and fixes.
All of these were in linux-next before I pulled them into my tree, and
have been in linux-next all this week from my tree with no reported
problems"
* tag 'usb-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: fix GL type detection
USB: serial: replace symbolic permissions by octal permissions
USB: serial: cp210x: determine fw version for CP2105 and CP2108
USB: serial: cp210x: clean up type detection
USB: serial: cp210x: clean up set-chars request
USB: serial: cp210x: clean up control-request timeout
USB: serial: cp210x: fix flow-control error handling
USB: serial: cp210x: fix control-characters error handling
USB: serial: io_edgeport: drop unused descriptor helper
Broadcom's b53 switches have one IMP (Inband Management Port) that needs
to be programmed using its own designed register. IMP port may be
different than CPU port - especially on devices with multiple CPU ports.
For that reason it's required to explicitly note IMP port index and
check for it when choosing a register to use.
This commit fixes BCM5301x support. Those switches use CPU port 5 while
their IMP port is 8. Before this patch b53 was trying to program port 5
with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5).
It may be possible to also replace "cpu_port" usages with
dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix.
Fixes: 967dd82ffc ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
The GRE tunnel device can pull existing outer headers in ipge_xmit.
This is a rare path, apparently unique to this device. The below
commit ensured that pulling does not move skb->data beyond csum_start.
But it has a false positive if ip_summed is not CHECKSUM_PARTIAL and
thus csum_start is irrelevant.
Refine to exclude this. At the same time simplify and strengthen the
test.
Simplify, by moving the check next to the offending pull, making it
more self documenting and removing an unnecessary branch from other
code paths.
Strengthen, by also ensuring that the transport header is correct and
therefore the inner headers will be after skb_reset_inner_headers.
The transport header is set to csum_start in skb_partial_csum_set.
Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Fixes: 1d011c4803 ("ip_gre: add validation for csum_start")
Reported-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull MTD updates from Miquel Raynal:
"MTD changes:
- blkdevs:
- Simplify the refcounting in blktrans_{open, release}
- Simplify blktrans_getgeo
- Remove blktrans_ref_mutex
- Simplify blktrans_dev_get
- Use lockdep_assert_held
- Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
- ftl:
- Don't cast away the type when calling add_mtd_blktrans_dev
- Don't cast away the type when calling add_mtd_blktrans_dev
- Use container_of() rather than cast
- Fix use-after-free
- Add discard support
- Allow use of MTD_RAM for testing purposes
- concat:
- Check _read, _write callbacks existence before assignment
- Judge callback existence based on the master
- maps:
- Maps: remove dead MTD map driver for PMC-Sierra MSP boards
- mtdblock:
- Warn if added for a NAND device
- Add comment about UBI block devices
- Update old JFFS2 mention in Kconfig
- partitions:
- Redboot: convert to YAML
NAND core changes:
- Repair Miquel Raynal's email address in MAINTAINERS
- Fix a couple of spelling mistakes in Kconfig
- bbt: Skip bad blocks when searching for the BBT in NAND
- Remove never changed ret variable
Raw NAND changes:
- cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
- intel: Fix error handling in probe
- omap: Fix kernel doc warning on 'calcuate' typo
- gpmc: Fix the ECC bytes vs. OOB bytes equation
SPI-NAND core changes:
- Properly fill the OOB area.
- Fix comment
SPI-NAND drivers changes:
- macronix: Add Quad support for serial NAND flash"
* tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
mtd_blkdevs: simplify the refcounting in blktrans_{open, release}
mtd_blkdevs: simplify blktrans_getgeo
mtd_blkdevs: remove blktrans_ref_mutex
mtd_blkdevs: simplify blktrans_dev_get
mtd/rfd_ftl: don't cast away the type when calling add_mtd_blktrans_dev
mtd/ftl: don't cast away the type when calling add_mtd_blktrans_dev
mtd_blkdevs: use lockdep_assert_held
mtd_blkdevs: don't hold del_mtd_blktrans_dev in blktrans_{open, release}
mtd: rawnand: intel: Fix error handling in probe
mtd: mtdconcat: Check _read, _write callbacks existence before assignment
mtd: mtdconcat: Judge callback existence based on the master
mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards
mtd: rfd_ftl: use container_of() rather than cast
mtd: rfd_ftl: fix use-after-free
mtd: rfd_ftl: add discard support
mtd: rfd_ftl: allow use of MTD_RAM for testing purposes
mtdblock: Warn if added for a NAND device
mtd: spinand: macronix: Add Quad support for serial NAND flash
mtdblock: Add comment about UBI block devices
...
fs/binfmt_aout.c: In function ‘load_aout_library’:
fs/binfmt_aout.c:311:27: error: expected ‘)’ before ‘;’ token
311 | MAP_FIXED | MAP_PRIVATE;
| ^
fs/binfmt_aout.c:309:10: error: too few arguments to function ‘vm_mmap’
309 | error = vm_mmap(file, start_addr, ex.a_text + ex.a_data,
| ^~~~~~~
In file included from fs/binfmt_aout.c:12:
include/linux/mm.h:2626:35: note: declared here
2626 | extern unsigned long __must_check vm_mmap(struct file *, unsigned long,
| ^~~~~~~
Fix this by reverting the accidental replacement of a comma by a
semicolon.
Fixes: 42be8b4253 ("binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()")
Reported-by: noreply@ellerman.id.au
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On configs where there is no confirgured direct route to the target of
the ARP probes, these probes are still sent and may be replied to
properly, so no need to repeatedly complain about the missing route.
Signed-off-by: David Decotigny <ddecotig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GRE interfaces are not Ether-like and therefore it is not
possible to generate the v6LL address the same way as (for example)
GRETAP devices.
With default settings, a GRE interface will attempt generating its v6LL
address using the EUI64 approach, but this will fail when the local
endpoint of the GRE tunnel is set to "any". In this case the GRE
interface will end up with no v6LL address, thus violating RFC4291.
SIT interfaces already implement a different logic to ensure that a v6LL
address is always computed.
Change the GRE v6LL generation logic to follow the same approach as SIT.
This way GRE interfaces will always have a v6LL address as well.
Behaviour of GRETAP interfaces has not been changed as they behave like
classic Ether-like interfaces.
To avoid code duplication sit_add_v4_addrs() has been renamed to
add_v4_addrs() and adapted to handle also the IP6GRE/GRE cases.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
tx_done is not used for napi_complete_done(). Thus, NAPI busy polling
mechanism by gro_flush_timeout and napi_defer_hard_irqs will not able
be triggered after a packet is transmitted when there is no receive
packet.
Fix this by taking the maximum value between tx_done and rx_done as
overall budget completed by the rxtx NAPI poll to ensure XDP Tx ZC
operation is continuously polling for next Tx frame. This gives
benefit of lower packet submission processing latency and jitter
under XDP Tx ZC mode.
Performance of tx-only using xdp-sock on Intel ADL-S platform is
the same with and without this patch.
root@intel-corei7-64:~# ./xdpsock -i enp0s30f4 -t -z -q 1 -n 10
sock0@enp0s30f4:1 txonly xdp-drv
pps pkts 10.00
rx 0 0
tx 511630 8659520
sock0@enp0s30f4:1 txonly xdp-drv
pps pkts 10.00
rx 0 0
tx 511625 13775808
sock0@enp0s30f4:1 txonly xdp-drv
pps pkts 10.00
rx 0 0
tx 511619 18892032
Fixes: 132c32ee5b ("net: stmmac: Add TX via XDP zero-copy socket")
Cc: <stable@vger.kernel.org> # 5.13.x
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's raise the default msize value to 128k.
The 'msize' option defines the maximum message size allowed for any
message being transmitted (in both directions) between 9p server and 9p
client during a 9p session.
Currently the default 'msize' is just 8k, which is way too conservative.
Such a small 'msize' value has quite a negative performance impact,
because individual 9p messages have to be split up far too often into
numerous smaller messages to fit into this message size limitation.
A default value of just 8k also has a much higher probablity of hitting
short-read issues like: https://gitlab.com/qemu-project/qemu/-/issues/409
Unfortunately user feedback showed that many 9p users are not aware that
this option even exists, nor the negative impact it might have if it is
too low.
Link: http://lkml.kernel.org/r/61ea0f0faaaaf26dd3c762eabe4420306ced21b9.1630770829.git.linux_oss@crudebyte.com
Link: https://lists.gnu.org/archive/html/qemu-devel/2021-03/msg01003.html
Signed-off-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
