The error paths set err, but it's not returned.
I wondered if we should fix all of the callers to check the returned
value, but Ben explains why the code is this way:
> Most call sites ignore it on purpose. There's nothing we can do if
> we fail to get a buffer at interrupt time, so we point the buffer to
> the scratch page so the HW doesn't DMA into lalaland and lose the
> packet.
>
> The one call site that tests and can fail is the one used when brining
> the interface up. If we fail to allocate at that point, we fail the
> ifup. But as you noticed, I do have a bug not returning the error.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 2465 defines ipv6IfStatsOutFragFails as:
"The number of IPv6 datagrams that have been discarded
because they needed to be fragmented at this output
interface but could not be."
The existing implementation, instead, would increase the counter
twice in case we fail to allocate room for single fragments:
once for the fragment, once for the datagram.
This didn't look intentional though. In one of the two affected
affected failure paths, the double increase was simply a result
of a new 'goto fail' statement, introduced to avoid a skb leak.
The other path appears to be affected since at least 2.6.12-rc2.
Reported-by: Sabrina Dubroca <sdubroca@redhat.com>
Fixes: 1d325d217c ("ipv6: ip6_fragment: fix headroom tests and skb leak")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three small fixes. The transfer size fixes are actually correcting
some performance drops on the hpsa and smartpqi cards. The cards
actually have an internal cache for request speed up but bypass it for
transfers > 1MB. Since 4.3 the efficiency of our merges has rendered
the cache mostly unused, so limit transfers to under 1MB to recover
the cache boost.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=7jN6
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes.
The transfer size fixes are actually correcting some performance drops
on the hpsa and smartpqi cards. The cards actually have an internal
cache for request speed up but bypass it for transfers > 1MB. Since
4.3 the efficiency of our merges has rendered the cache mostly unused,
so limit transfers to under 1MB to recover the cache boost"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: smartpqi: limit transfer length to 1MB
scsi: hpsa: limit transfer length to 1MB
- add a missing "!" in the uuid tests
- remove the last remaining user of the uuid_be type, and then
the type and its helpers
-----BEGIN PGP SIGNATURE-----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=FeA7
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid
Pull uuid fixes from Christoph Hellwig:
- add a missing "!" in the uuid tests
- remove the last remaining user of the uuid_be type, and then the type
and its helpers
* tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid:
uuid: remove uuid_be
thunderbolt: use uuid_t instead of uuid_be
uuid: fix incorrect uuid_equal conversion in test_uuid_test
- split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool. (Vladimir Murzin).
-----BEGIN PGP SIGNATURE-----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=fJWP
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma mapping fixes from Christoph Hellwig:
"split the global dma coherent pool from the per-device pool.
This fixes a regression in the earlier 4.13 pull requests where the
global pool would override a per-device CMA pool (Vladimir Murzin)"
* tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping:
ARM: NOMMU: Wire-up default DMA interface
dma-coherent: introduce interface for default DMA pool
Partially overlapping regions cause platform device creation
to fail. The latter of two overlapping resources will fail to be
reserved. Fix this by merging overlapping resource ranges while
enumerating WDAT table entries.
Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Flow control autonegotiation is not supported for XFI. Make sure that
ixgbe_device_supports_autoneg_fc() returns false and
hw->fc.disable_fc_autoneg is set to true to avoid running the fc_autoneg
function for that device.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Flow control autonegotiation is not supported for fiber on X553. Add
device ID checks in ixgbe_device_supports_autoneg_fc() to return the
appropriate value.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The MAC register NW_MNG_IF_SEL fields have been redefined for
X553. These changes impact the iXFI driver code flow. Since iXFI is
only supported in X552, add MAC checks for iXFI flows.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Enable LASI interrupts on X552 devices in order to receive notifications of
link configurations of the external PHY and support the configuration of
the internal iXFI link since iXFI does not support auto-negotiation. This
is not required for X553 devices; add a check to avoid enabling LASI
interrupts for X553 devices.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds a check to ensure that adding the MAC filter was
successful before setting the MACVLAN. If it was unsuccessful, propagate
the error.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
It's always bothered me that we only disable preemption in
copy_user_page around the call to flush_dcache_page_asm.
This patch extends this to after the copy.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
Helge noticed that we flush the TLB page in flush_cache_page but not in
flush_cache_range or flush_cache_mm.
For a long time, we have had random segmentation faults building
packages on machines with PA8800/8900 processors. These machines only
support equivalent aliases. We don't see these faults on machines that
don't require strict coherency. So, it appears TLB speculation
sometimes leads to cache corruption on machines that require coherency.
This patch adds TLB flushes to flush_cache_range and flush_cache_mm when
coherency is required. We only flush the TLB in flush_cache_page when
coherency is required.
The patch also optimizes flush_cache_range. It turns out we always have
the right context to use flush_user_dcache_range_asm and
flush_user_icache_range_asm.
The patch has been tested for some time on rp3440, rp3410 and A500-44.
It's been boot tested on c8000. No random segmentation faults were
observed during testing.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
Mic mute led does not work on HP ProBook 440 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
BugLink: https://bugs.launchpad.net/bugs/1705586
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy the approach taken by gfx8, which simplifies the code, and set the
instance index properly. The latter is required for debugging, e.g. for
reading wave status by UMR.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If our device loses its connection for longer than the dead timeout we
will set NBD_DISCONNECTED in order to quickly fail any pending IO's that
flood in after the IO's that were waiting during the dead timer.
However if we re-connect at some point in the future we'll still see
this DISCONNECTED flag set if we then lose our connection again after
that, which means we won't get notifications for our newly lost
connections. Fix this by just clearing the DISCONNECTED flag on
reconnect in order to make sure everything works as it's supposed to.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Michael Chan says:
====================
bnxt_en: Fix kbuild errors and rename phys_port_name.
Fix 2 more kbuild errors (the first one already fixed by DaveM), and rename
the physical port name.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the phys_port_name for the external physical port to be in
"pA" format and that of VF-rep to be in "pCvfD" format as
suggested by Jakub Kicinski.
Fixes: c124a62ff2 ("bnxt_en: add support for port_attr_get and get_phys_port_name")
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the build error:
‘struct net_device’ has no member named ‘switchdev_ops’
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: c124a62ff2 ("bnxt_en: add support for port_attr_get and and get_phys_port_name")
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And define empty functions in bnxt_vfr.h when CONFIG_BNXT_SRIOV is not
defined.
This fixes build error when CONFIG_BNXT_SRIOV is switched off:
>> drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:165:16: error: 'struct
>> bnxt' has no member named 'sriov_lock'
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 4ab0c6a8ff ("bnxt_en: add support to enable VF-representors")
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some machines can't power off the machine, so disable the lockup detectors to
avoid this watchdog BUG to show up every few seconds:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1]
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+
The Page Deallocation Table (PDT) holds the physical addresses of all broken
memory addresses. With the physical address we now are able to show which DIMM
slot (e.g. 1a, 3c) actually holds the broken memory module so that users are
able to replace it.
Signed-off-by: Helge Deller <deller@gmx.de>
I forgot one spot when introducing struct test_obj_val.
Fixes: e859afe1ee ("lib: test_rhashtable: fix for large entry counts")
Reported by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e5a03bfd87 ("phy: Add an mdio_device structure")
introduced a spurious trailing semicolon. Remove it.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger says:
====================
network related warning fixes
Various fixes for warnings in network code and drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable owned_by_user is always set, but only used
when kernel is configured with LOCKDEP enabled.
Get rid of the warning by moving the code to put the call
to owned_by_user into the the rcu_protected call.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warning: ‘recent_old_fops’ defined but not used
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warning: variable ‘netdev’ set but not used
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a couple of warnings where variable ‘txq’ set but not used
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>v, i);
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes warning because location is u32 and can never be netative
warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netdev (PF netdev or representor) is opened or closed, set the
physical port config bit appropriately - which powers UP/DOWN the PHY
module for the physical interface.
The PHY is powered first in the HW/FW configuration step when opening
the netdev and again last in the HW/FW configuration step when closing
the netdev.
This is only applicable when there is a physical port associated with
the netdev and if the NSP support this. Otherwise we silently ignore
this step.
The 'nfp_eth_set_configured' can actually return positive values -
updated the function documentation appropriately.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
we can use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
1. drivers/net/appletalk/ipddp.c
2. drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value REQ_OP_FLUSH is only used by the block code for
request-based devices.
Remove the tests for REQ_OP_FLUSH from the bio-based dm-zoned-target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c78c
("md: fix deadlock between mddev_suspend() and md_write_start()") is
available.
This version change allows userspace to detect that MD fix is available.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Use runtime flag to ensure that an mddev gets suspended/resumed just once.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
During growing reshapes (i.e. stripes being added to a raid set), the
new stripe images are not in-sync and not part of the raid set until
the reshape is started.
LVM2 has to request multiple table reloads involving superblock updates
in order to reflect proper size of SubLVs in the cluster. Before a stripe
adding reshape starts, validate_raid_redundancy() fails as a result of that
because it checks the total number of devices against the number of rebuild
ones rather than the actual ones in the raid set (as retrieved from the
superblock) thus resulting in failed raid4/5/6/10 redundancy checks.
E.g. convert 3 stripes -> 7 stripes raid5 (which only allows for maximum
1 device to fail) requesting +4 delta disks causing 4 devices to rebuild
during reshaping thus failing activation.
To fix this, move validate_raid_redundancy() to get access to the
current raid_set members.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1. Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.
This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Add a firmware wrapper function, which asks PDC firmware for the DIMM slot of a
physical address. This is needed to show users which DIMM module needs
replacement in case a broken DIMM was encountered.
Signed-off-by: Helge Deller <deller@gmx.de>
Paul Moore reported a SELinux/IP_PASSSEC regression
caused by missing skb->sp at recvmsg() time. We need to
preserve the skb head state to process the IP_CMSG_PASSSEC
cmsg.
With this commit we avoid releasing the skb head state in the
BH even if a secpath is attached to the current skb, and stores
the skb status (with/without head states) in the scratch area,
so that we can access it at skb deallocation time, without
incurring in cache-miss penalties.
This also avoids misusing the skb CB for ipv6 packets,
as introduced by the commit 0ddf3fb2c4 ("udp: preserve
skb->dst if required for IP options processing").
Clean a bit the scratch area helpers implementation, to
reduce the code differences between 32 and 64 bits build.
Reported-by: Paul Moore <paul@paul-moore.com>
Fixes: 0a463c78d2 ("udp: avoid a cache miss on dequeue")
Fixes: 0ddf3fb2c4 ("udp: preserve skb->dst if required for IP options processing")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c9c2877d08 ("parisc: Add Page Deallocation Table (PDT) support")
introduced the pdc_pat_mem_read_pd_pdt() firmware helper function, which
crashed the system because it trashed the stack if the
pdc_pat_mem_read_pd_retinfo struct was located on the stack (and which is
in size less than the required 32 64-bit values).
Fix it by using the pdc_result struct instead when calling firmware and copy
the return values back into the result struct when finished sucessfully.
While debugging this code I noticed that the pdc_type wasn't set correctly
either, so let's fix that too.
Fixes: c9c2877d08 ("parisc: Add Page Deallocation Table (PDT) support")
Signed-off-by: Helge Deller <deller@gmx.de>
It's possible the preferred HMB size may not be a multiple of the
chunk_size. This patch moves len to function scope and uses that in
the for loop increment so the last iteration doesn't cause the total
size to exceed the allocated HMB size.
Based on an earlier patch from Keith Busch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Fixes: 87ad72a59a ("nvme-pci: implement host memory buffer support")
The FC-NVME spec hasn't locked down on the format string for TRADDR.
Currently the spec is lobbying for "nn-<16hexdigits>:pn-<16hexdigits>"
where the wwn's are hex values but not prefixed by 0x.
Most implementations so far expect a string format of
"nn-0x<16hexdigits>:pn-0x<16hexdigits>" to be used. The transport
uses the match_u64 parser which requires a leading 0x prefix to set
the base properly. If it's not there, a match will either fail or return
a base 10 value.
The resolution in T11 is pushing out. Therefore, to fix things now and
to cover any eventuality and any implementations already in the field,
this patch adds support for both formats.
The change consists of replacing the token matching routine with a
routine that validates the fixed string format, and then builds
a local copy of the hex name with a 0x prefix before calling
the system parser.
Note: the same parser routine exists in both the initiator and target
transports. Given this is about the only "shared" item, we chose to
replicate rather than create an interdendency on some shared code.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are cases where threads are in the process of submitting new
io when the LLDD calls in to remove the remote port. In some cases,
the next io actually goes to the LLDD, who knows the remoteport isn't
present and rejects it. To properly recovery/restart these i/o's we
don't want to hard fail them, we want to treat them as temporary
resource errors in which a delayed retry will work.
Add a couple more checks on remoteport connectivity and commonize the
busy response handling when it's seen.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
