The low level index of raw branch records for the most recent branch can
be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX
branch_sample_type. Extend struct branch_stack to support it.
However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and
entries[] will be output by kernel. The pointer of entries[] could be
wrong, since the output format is different with new struct
branch_stack. Add a variable no_hw_idx in struct perf_sample to
indicate whether the hw_idx is output. Add get_branch_entry() to return
corresponding pointer of entries[0].
To make dummy branch sample consistent as new branch sample, add hw_idx
in struct dummy_branch_stack for cs-etm and intel-pt.
Apply the new struct branch_stack for synthetic events as well.
Extend test case sample-parsing to support new struct branch_stack.
Committer notes:
Renamed get_branch_entries() to perf_sample__branch_entries() to have
proper namespacing and pave the way for this to be moved to libperf,
eventually.
Add 'static' to that inline as it is in a header.
Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build
on arm64.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'nr_jumps' field in 'struct annotation' is not used since it's
inception in commit 2402e4a936 ("perf annotate browser: Show 'jumpy'
functions"). Get rid of it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-7-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in debugging, add this extra message:
detect_kbuild_dir: Couldn't find "/lib/modules/5.4.20-200.fc31.x86_64/build/include/generated/autoconf.h", missing kernel-devel package?.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have supported the event modifier "percore" which sums up the event
counts for all hardware threads in a core and show the counts per core.
For example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A -- sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 395,072 cpu/event=cpu-cycles,percore/
S0-D0-C1 851,248 cpu/event=cpu-cycles,percore/
S0-D0-C2 954,226 cpu/event=cpu-cycles,percore/
S0-D0-C3 1,233,659 cpu/event=cpu-cycles,percore/
This patch provides a new option "--percore-show-thread". It is used
with event modifier "percore" together to sum up the event counts for
all hardware threads in a core but show the counts per hardware thread.
This is essentially a replacement for the any bit (which is gone in
Icelake). Per core counts are useful for some formulas, e.g. CoreIPC.
The original percore version was inconvenient to post process. This
variant matches the output of the any bit.
With this patch, for example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1
Performance counter stats for 'system wide':
CPU0 2,453,061 cpu/event=cpu-cycles,percore/
CPU1 1,823,921 cpu/event=cpu-cycles,percore/
CPU2 1,383,166 cpu/event=cpu-cycles,percore/
CPU3 1,102,652 cpu/event=cpu-cycles,percore/
CPU4 2,453,061 cpu/event=cpu-cycles,percore/
CPU5 1,823,921 cpu/event=cpu-cycles,percore/
CPU6 1,383,166 cpu/event=cpu-cycles,percore/
CPU7 1,102,652 cpu/event=cpu-cycles,percore/
We can see counts are duplicated in CPU pairs (CPU0/CPU4, CPU1/CPU5,
CPU2/CPU6, CPU3/CPU7).
The interval mode also works. For example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -I 1000
# time CPU counts unit events
1.000425421 CPU0 925,032 cpu/event=cpu-cycles,percore/
1.000425421 CPU1 430,202 cpu/event=cpu-cycles,percore/
1.000425421 CPU2 436,843 cpu/event=cpu-cycles,percore/
1.000425421 CPU3 1,192,504 cpu/event=cpu-cycles,percore/
1.000425421 CPU4 925,032 cpu/event=cpu-cycles,percore/
1.000425421 CPU5 430,202 cpu/event=cpu-cycles,percore/
1.000425421 CPU6 436,843 cpu/event=cpu-cycles,percore/
1.000425421 CPU7 1,192,504 cpu/event=cpu-cycles,percore/
If we offline CPU5, the result is:
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1
Performance counter stats for 'system wide':
CPU0 2,752,148 cpu/event=cpu-cycles,percore/
CPU1 1,009,312 cpu/event=cpu-cycles,percore/
CPU2 2,784,072 cpu/event=cpu-cycles,percore/
CPU3 2,427,922 cpu/event=cpu-cycles,percore/
CPU4 2,752,148 cpu/event=cpu-cycles,percore/
CPU6 2,784,072 cpu/event=cpu-cycles,percore/
CPU7 2,427,922 cpu/event=cpu-cycles,percore/
1.001416041 seconds time elapsed
v4:
---
Ravi Bangoria reports an issue in v3. Once we offline a CPU,
the output is not correct. The issue is we should use the cpu
idx in print_percore_thread rather than using the cpu value.
v3:
---
1. Fix the interval mode output error
2. Use cpu value (not cpu index) in config->aggr_get_id().
3. Refine the code according to Jiri's comments.
v2:
---
Add the explanation in change log. This is essentially a replacement
for the any bit. No code change.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200214080452.26402-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move it from tools/perf/util/cgroup.c as it can be used by other places.
Note that cgroup filesystem is different from others since it's usually
mounted separately (in v1) for each subsystem.
I just copied the code with a little modification to pass a name of
subsystem.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200127100031.1368732-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang warns:
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string
comparison function instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/map.c:434:15: error: result of comparison against a string literal
is unspecified (use an explicit string comparison function instead)
[-Werror,-Wstring-compare]
if (srcline != SRCLINE_UNKNOWN)
^ ~~~~~~~~~~~~~~~
Reviewer Notes:
Looks good to me. Some more context:
https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare
The spec says:
J.1 Unspecified behavior
The following are unspecified:
.. Whether two string literals result in distinct arrays (6.4.5).
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/900
Link: http://lore.kernel.org/lkml/20200223193456.25291-1-nick.desaulniers@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dso->kernel value is now set to everything that is in
machine->kmaps, but that was being used to decide if vmlinux lookup is
needed, which ended up making that lookup be made for kernel modules,
that now have dso->kernel set, leading to these kinds of warnings when
running on a machine with compressed kernel modules, like fedora:31:
[root@five ~]# perf record -F 10000 -a sleep 2
[ perf record: Woken up 1 times to write data ]
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
[ perf record: Captured and wrote 1.024 MB perf.data (1366 samples) ]
[root@five ~]#
This happens when collecting the buildid, when we find samples for
kernel modules, fix it by checking if the looked up DSO is a kernel
module by other means.
Fixes: 02213cec64 ("perf maps: Mark module DSOs with kernel type")
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200302191007.GD10335@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed with gcc 10 (fedora rawhide) that those variables were not being
declared as static, so end up with:
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1
Prefix those with bench__ and add them to bench/bench.h, so that we can
share those on the tools needing to access those variables from signal
handlers.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the code more compact by using asprintf() instead of malloc()+strncpy() which also uses
less memory and avoids these warnings with gcc 10:
CC /tmp/build/perf/util/cloexec.o
In file included from /usr/include/string.h:495,
from util/parse-events.h:12,
from util/parse-events.c:18:
In function ‘strncpy’,
inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:271:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘sys_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/dirent.h:61,
from util/parse-events.c:5:
util/parse-events.c: In function ‘tracepoint_id_to_path’:
/usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here
33 | char d_name[256]; /* We must not include limits.h! */
| ^~~~~~
In file included from /usr/include/string.h:495,
from util/parse-events.h:12,
from util/parse-events.c:18:
In function ‘strncpy’,
inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:273:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘evt_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/dirent.h:61,
from util/parse-events.c:5:
util/parse-events.c: In function ‘tracepoint_id_to_path’:
/usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here
33 | char d_name[256]; /* We must not include limits.h! */
| ^~~~~~
CC /tmp/build/perf/util/call-path.o
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200302145535.GA28183@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.
While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.
Noticed in fedora rawhide running with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To fix the build with newer gccs, that without this patch exit with:
LD /tmp/build/perf/tests/perf-in.o
ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1
First noticed in fedora:rawhide/32 with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While rendering annotate browser from perf report tui, we keep track
of total number of lines(asm + source) in annotation->nr_entries and
total number of asm lines in annotation->nr_asm_entries. But we don't
reset them before starting. Thus if user annotates same function
multiple times, we restart incrementing these fields with old values.
This causes a segfault when user tries to toggle source code after
annotating same function multiple times. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-5-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Align fields of struct annotate_args.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are allocating disasm_line object in annotation_line__new() instead
of disasm_line__new(). Similarly annotation_line__delete() is actually
freeing disasm_line object as well. This complexity is because of
privsize. But we don't need privsize anymore so get rid of privsize and
simplify disasm_line allocation and freeing code.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
privsize is passed as 0 from all the symbol__annotate() callers.
Remove it from argument list.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strlist__add() may fail with -ENOMEM. Check it and give debugging hint
in advance.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/1582727404-180095-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While documenting annotate.show_nr_samples config option, I found many
other config options missing in perf-config documentation. Add them.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-9-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf config annotate options says it works only with TUI, which is wrong.
Most of the TUI options are applicable to stdio2 as well. So remove that
generic line and add individual line with each option stating which
browsers supports that option. Also, annotate.show_nr_samples config is
missing in Documentation. Describe it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-8-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For all the perf-config options that can also be set from command line
option, the preference is given to command line version in case of any
conflict. But that's opposite in case of perf annotate. i.e. the more
preference is given to default option rather than command line option.
Fix it.
Before:
$ ./perf config
annotate.show_nr_samples=false
$ ./perf annotate shash --show-nr-samples
Percent│
│24: mov -0xc(%rbp),%eax
49.19 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
After:
Samples│
│24: mov -0xc(%rbp),%eax
1 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-7-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce perf_config_u8() utility function to convert char * input into
u8 destination. We will utilize it in followup patch.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-5-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate --show-nr-samples does not really show number of samples.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_nr_samples and another is
annotation_options.show_nr_samples.
We save command line option in symbol_conf.show_nr_samples but uses
annotation_option.show_nr_samples while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_nr_samples to
annotation__default_options.show_nr_samples but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_nr_samples is used by perf report/top as well. So
let's kill annotation_options.show_nr_samples.
On a side note, I've kept annotation_options.show_nr_samples definition
because it's still used by perf-config code. Follow up patch to fix
perf-config for annotate will remove annotation_options.show_nr_samples.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate --show-total-period does not really show total period.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_total_period and another is
annotation_options.show_total_period.
We save command line option in symbol_conf.show_total_period but uses
annotation_option.show_total_period while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_total_period to
annotation__default_options.show_total_period but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_total_period is used by perf report/top as well.
So let's kill annotation_options.show_total_period.
On a side note, I've kept annotation_options.show_total_period
definition because it's still used by perf-config code. Follow up patch
to fix perf-config for annotate will remove
annotation_options.show_total_period.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf annotate' TUI browser provides a 'r' hot key to switch to a
script browser. But the annotate browser title bar becomes hidden while
switching back from script browser. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copy over powerpc syscall.tbl to grab changes from the below commits
fddb5d430a ("open: introduce openat2(2) syscall")
9a2cef09c8 ("arch: wire up pidfd_getfd syscall")
Now 'perf trace' on powerpc will be able to map from those syscall
strings to the right syscall numbers, i.e.
perf trace -e pidfd*
Will include 'pidfd_getfd' as well as:
perf trace open*
Will cover all 'open' variants.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All ->read_finish() implementations are doing the same thing. Add a
helper function so that they can share the same implementation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200217082300.6301-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the event is disabled, don't enable it again here.
Based-on-patch-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the cs_etm event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
coresight feature, but the code seems buggy same as arm-spe and
intel-pt.
Tester notes:
Thanks for looping, Adrian. Applied this patch and tested with
CoreSight on juno board, it works well.
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-4-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the intel_bts event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
intel_bts feature, but the code seems buggy same as arm-spe and
intel-pt.
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-3-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be endless.
If the intel_pt event is disabled, we don't enable it again here.
Before the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 46803
^C^C^C^C^C^C
After the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 48591
^C[ perf record: Woken up 0 times to write data ]
Warning:
AUX data lost 504 times out of 4816!
[ perf record: Captured and wrote 2024.405 MB perf.data ]
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-2-adrian.hunter@intel.com
[ ahunter: removed redundant 'else' after 'return' ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test places a kprobe to function getname_flags() in the kernel
which has the following prototype:
struct filename *getname_flags(const char __user *filename, int flags, int *empty)
The 'filename' argument points to a filename located in user space memory.
Looking at commit 88903c4643 ("tracing/probe: Add ustring type for
user-space string") the kprobe should indicate that user space memory is
accessed.
Output before:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : FAILED!
67: Check open filename arg using perf trace + vfs_getname: FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@m35lp76 perf]#
Comments from Masami Hiramatsu:
This bug doesn't happen on x86 or other archs on which user address
space and kernel address space is the same. On some arches (ppc64 in
this case?) user address space is partially or completely the same as
kernel address space.
(Yes, they switch the world when running into the kernel) In this case,
we need to use different data access functions for each space.
That is why I introduced the "ustring" type for kprobe events.
As far as I can see, Thomas's patch is sane. Thomas, could you show us
your result on your test environment?
Comments from Thomas Richter:
Test results for s/390 included above.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bpf.h file needed gets installed in /usr/lib/include/perf/bpf/bpf.h,
and /usr/lib/include/perf/ is added to the include path passed to clang
to build the eBPF bytecode, so just remove "bpf/", its directly in the
path passed already. This was working by accident, fix it.
I.e. now this is back working:
# cat /home/acme/git/perf/tools/perf/examples/bpf/hello.c
#include <stdio.h>
int syscall_enter(openat)(void *args)
{
puts("Hello, world\n");
return 0;
}
license(GPL);
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/hello.c
0.000 pickup/21493 __bpf_stdout__(Hello, world)
56.462 sh/13539 __bpf_stdout__(Hello, world)
56.536 sh/13539 __bpf_stdout__(Hello, world)
56.673 sh/13539 __bpf_stdout__(Hello, world)
56.781 sh/13539 __bpf_stdout__(Hello, world)
56.707 perf/13182 __bpf_stdout__(Hello, world)
56.849 perf/13182 __bpf_stdout__(Hello, world)
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d9myswhgo8gfi3vmehdqpxa7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch:
# ./perf test 39 41
39: LLVM search and compile :
39.1: Basic BPF llvm compile : Ok
39.2: kbuild searching : FAILED!
39.3: Compile source for BPF prologue generation : Skip
39.4: Compile source for BPF relocation : Skip
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : FAILED!
41.4: BPF relocation checker : Skip
#
Using 'perf test -v' for these tests shows that it is not finding
uapi/linux/fs.h, which ends up being because we don't setup the right header
path. Fix it.
After this patch:
# perf test 39 41
39: LLVM search and compile :
39.1: Basic BPF llvm compile : Ok
39.2: kbuild searching : Ok
39.3: Compile source for BPF prologue generation : Ok
39.4: Compile source for BPF relocation : Ok
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : Ok
41.4: BPF relocation checker : Ok
#
Longer description:
In llvm-utils.c we use some techniques to obtain the kbuild make
directives and that recently stopped working as now 'ar' gets called and
expects to find the dummy.o used to echo these variables:
$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)
Add the $(CC) line to satisfy that, making sure this works with all
kernels, i.e. preserving the temp directory and files in it used for
this technique we can see that it works everywhere:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 4
drwx------. 2 root root 80 Feb 14 09:42 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:42 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
#
# cat /tmp/tmp.qgaFHgxjZ4/Makefile
obj-y := dummy.o
$(obj)/%.o: $(src)/%.c
@echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)"
$(CC) -c -o $@ $<
#
Then build with an old kernel Makefile:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h
#
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 8
drwx------. 2 root root 100 Feb 14 09:43 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
#
And a new one:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 4
drwx------. 2 root root 80 Feb 14 09:43 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
# make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
#
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 16
drwx------. 2 root root 160 Feb 14 09:44 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:44 ..
-rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a
-rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
-rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order
#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an arm64 version of get_cpuid(), which is used for various annotation
and headers - for example, I now get the CPUID in "perf report --header",
as shown in this snippet:
# hostname : ubuntu
# os release : 5.5.0-rc1-dirty
# perf version : 5.5.rc1.gbf8a13dc9851
# arch : aarch64
# nrcpus online : 96
# nrcpus avail : 96
# cpuid : 0x00000000480fd010
Since much of the code to read the MIDR is already in get_cpuid_str(),
factor out this code.
Tester notes:
I tested this patch on my new ARM64 Kunpeng 920 server.
[root@node1 zsk]# ./perf --version
perf version 5.6.rc1.g2cdb955b7252
Both perf list and perf stat can work.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1576245255-210926-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf trace -e syscalls:sys_enter_prctl --filter="option==SET_NAME"
0.000 Socket Thread/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
0.053 SSL Cert #78/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
^C #
If one uses '-v' with 'perf trace', we can see the filter it puts in
place:
New filter for syscalls:sys_enter_prctl: (option==0xf) && (common_pid != 3859 && common_pid != 2757)
We still need to allow using plain '-e prctl' and have this turn into
creating a 'syscalls:sys_enter_prctl' event so that the filter can be
applied only to it as right now '-e prctl' ends up using the
'raw_syscalls:sys_enter/sys_exit'.
The end goal is to have something like:
# perf trace -e prctl/option==SET_NAME/
And have that use tracepoint filters or eBPF ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can use it with strtoul, allowing string to number
conversions in filter expressions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So the kmaps pointer setup is centralized and we do not need to update
it in all those places (2 current places and few more missing) after
calling maps__insert().
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210143218.24948-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map__clone() function can be called on kernel maps as well, so it
needs to duplicate the whole kmap data.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210143218.24948-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We add ksymbol map into machine->kmaps, so it needs to be created as
'struct kmap', which is dependent on its dso having kernel type.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210200847.GA36715@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We add kernel module map into machine->kmaps, so it needs to be created
as 'struct kmap', which is dependent on its dso having kernel type.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210143218.24948-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
fddb5d430a ("open: introduce openat2(2) syscall")
9a2cef09c8 ("arch: wire up pidfd_getfd syscall")
We also need to grab a copy of uapi/linux/openat2.h since it is now
needed by fcntl.h, add it to tools/perf/check_headers.h.
$ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
--- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2019-12-20 16:43:57.662429958 -0300
+++ arch/x86/entry/syscalls/syscall_64.tbl 2020-02-10 16:36:22.070012468 -0300
@@ -357,6 +357,8 @@
433 common fspick __x64_sys_fspick
434 common pidfd_open __x64_sys_pidfd_open
435 common clone3 __x64_sys_clone3/ptregs
+437 common openat2 __x64_sys_openat2
+438 common pidfd_getfd __x64_sys_pidfd_getfd
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
Update tools/'s copy of that file:
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
See the result:
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2020-02-10 16:42:59.010636041 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2020-02-10 16:43:24.149958337 -0300
@@ -346,5 +346,7 @@
[433] = "fspick",
[434] = "pidfd_open",
[435] = "clone3",
+ [437] = "openat2",
+ [438] = "pidfd_getfd",
};
-#define SYSCALLTBL_x86_64_MAX_ID 435
+#define SYSCALLTBL_x86_64_MAX_ID 438
$
Now one can use:
perf trace -e openat2,pidfd_getfd
To get just those syscalls or use in things like:
perf trace -e open*
To get all the open variant (open, openat, openat2, etc) or:
perf trace pidfd*
To get the pidfd syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the more optimized strlist implementation to do the idle function
lookup.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210163147.25358-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "acpi_idle_do_entry", "acpi_processor_ffh_cstate_enter", and
"idle_cpu" symbols appear in 'perf top' output, at least on AMD systems.
Add them to perf's idle_symbols list, so they don't dominate 'perf top'
output.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-2-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For data collected on machines with front end stalled cycles supported,
such as found on modern AMD CPU families, commit 146540fb54 ("perf
stat: Always separate stalled cycles per insn") introduces a new line in
CSV output with a leading comma that upsets some automated scripts.
Scripts have to use "-e ex_ret_instr" to work around this issue, after
upgrading to a version of perf with that commit.
We could add "if (have_frontend_stalled && !config->csv_sep)" to the not
(total && avg) else clause, to emphasize that CSV users are usually
scripts, and are written to do only what is needed, i.e., they wouldn't
typically invoke "perf stat" without specifying an explicit event list.
But - let alone CSV output - why should users now tolerate a constant
0-reporting extra line in regular terminal output?:
BEFORE:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
181,110,981 instructions # 0.58 insn per cycle
# 0.00 stalled cycles per insn
309,876,469 cycles
1.002202582 seconds time elapsed
The user would not like to see the now permanent:
"0.00 stalled cycles per insn"
line fixture, as it gives no useful information.
So this patch removes the printing of the zeroed stalled cycles line
altogether, almost reverting the very original commit fb4605ba47
("perf stat: Check for frontend stalled for metrics"), which seems like
it was written to normalize --metric-only column output of common Intel
machines at the time: modern Intel machines have ceased to support the
genericised frontend stalled metrics AFAICT.
AFTER:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
244,071,432 instructions # 0.69 insn per cycle
355,353,490 cycles
1.001862516 seconds time elapsed
Output behaviour when stalled cycles is indeed measured is not affected
(BEFORE == AFTER):
$ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1
Performance counter stats for 'system wide':
247,227,799 instructions # 0.63 insn per cycle
# 0.26 stalled cycles per insn
394,745,636 cycles
63,194,485 stalled-cycles-frontend # 16.01% frontend cycles idle
1.002079770 seconds time elapsed
Fixes: 146540fb54 ("perf stat: Always separate stalled cycles per insn")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf maps:
Cengiz Can:
- Add missing unlock to maps__insert() error case.
srcline:
Changbin Du:
- Make perf able to build with latest libbfd.
perf parse:
Leo Yan:
- Keep copy of string in perf_evsel_config_term() to fix sink terms
processing in ARM CoreSight.
perf test:
Thomas Richter:
- Fix test case Merge cpu map, removing extra reference count drop that
causes a segfault on s/390.
perf probe:
Thomas Richter:
- Add ustring support for perf probe command
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXjUwAgAKCRCyPKLppCJ+
J163AQCvl98mgSHfAVq9roP3ip1T1TwLXT+zPA9aOEc95d7NwwD9EuHVfs1kIjfV
+nv8/i3T3YVq1Dlx9MkvKEVQwJdiCws=
=f/tq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.6-20200201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf maps:
Cengiz Can:
- Add missing unlock to maps__insert() error case.
srcline:
Changbin Du:
- Make perf able to build with latest libbfd.
perf parse:
Leo Yan:
- Keep copy of string in perf_evsel_config_term() to fix sink terms
processing in ARM CoreSight.
perf test:
Thomas Richter:
- Fix test case Merge cpu map, removing extra reference count drop that
causes a segfault on s/390.
perf probe:
Thomas Richter:
- Add ustring support for perf probe command
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
`tools/perf/util/map.c` has a function named `maps__insert` that
acquires a write lock if its in multithread context.
Even though this lock is released when function successfully completes,
there's a branch that is executed when `maps_by_name == NULL` that
returns from this function without releasing the write lock.
Added an `up_write` to release the lock when this happens.
Fixes: a7c2b572e2 ("perf map_groups: Auto sort maps by name, if needed")
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200120141553.23934-1-cengiz@kernel.wtf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel commit 88903c4643 ("tracing/probe: Add ustring type for user-space string")
adds support for user-space strings when type 'ustring' is specified.
Here is an example using sysfs command line interface
for kprobes:
Function to probe:
struct filename *
getname_flags(const char __user *filename, int flags, int *empty)
Setup:
# cd /sys/kernel/debug/tracing/
# echo 'p:tmr1 getname_flags +0(%r2):ustring' > kprobe_events
# cat events/kprobes/tmr1/format | fgrep print
print fmt: "(%lx) arg1=\"%s\"", REC->__probe_ip, REC->arg1
# echo 1 > events/kprobes/tmr1/enable
# touch /tmp/111
# echo 0 > events/kprobes/tmr1/enable
# cat trace|fgrep /tmp/111
touch-5846 [005] d..2 255520.717960: tmr1:\
(getname_flags+0x0/0x400) arg1="/tmp/111"
Doing the same with the perf tool fails.
Using type 'string' succeeds:
# perf probe "vfs_getname=getname_flags:72 pathname=filename:string"
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:string)
....
# perf probe -d probe:vfs_getname
Removed event: probe:vfs_getname
However using type 'ustring' fails (output before):
# perf probe "vfs_getname=getname_flags:72 pathname=filename:ustring"
Failed to write event: Invalid argument
Error: Failed to add events.
#
Fix this by adding type 'ustring' in function
convert_variable_type().
Using ustring succeeds (output after):
# ./perf probe "vfs_getname=getname_flags:72 pathname=filename:ustring"
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:ustring)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
#
Note: This issue also exists on x86, it is not s390 specific.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: http://lore.kernel.org/lkml/20200120132011.64698-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit a2408a7036 ("perf evlist: Maintain evlist->all_cpus")
introduces a test case for cpumap merge operation, see functions
perf_cpu_map__merge() and test__cpu_map_merge().
The test case fails on s390 with this error message:
[root@m35lp76 perf]# ./perf test -Fvvvvv 52
52: Merge cpu map :
--- start ---
cpumask list: 1-2,4-5,7
perf: /root/linux/tools/include/linux/refcount.h:131:\
refcount_sub_and_test: Assertion `!(new > val)' failed.
Aborted (core dumped)
[root@m35lp76 perf]#
The root cause is in the function test__cpu_map_merge():
It creates two cpu_maps named 'a' and 'b':
struct perf_cpu_map *a = perf_cpu_map__new("4,2,1");
struct perf_cpu_map *b = perf_cpu_map__new("4,5,7");
and creates a third map named 'c' which is the result of
the merge of maps a and b:
struct perf_cpu_map *c = perf_cpu_map__merge(a, b);
After some verifaction of the merged cpu_map all three
of them are have their reference count reduced and are
freed:
perf_cpu_map__put(a); (1)
perf_cpu_map__put(b);
perf_cpu_map__put(c);
The release of perf_cpu_map__put(a) is wrong. The map
is already released and free'ed as part of the function
perf_cpu_map__merge(struct perf_cpu_map *orig,
| struct perf_cpu_map *other)
+--> perf_cpu_map__put(orig);
|
+--> cpu_map__delete(orig)
At the end perf_cpu_map_put() is called for map 'orig'
alias 'a' and since the reference count is 1, the map
is deleted, as can be seen by the following gdb trace:
(gdb) where
#0 tcache_put (tc_idx=0, chunk=0x156cc30) at malloc.c:2940
#1 _int_free (av=0x3fffd49ee80 <main_arena>, p=0x156cc30,
have_lock=<optimized out>) at malloc.c:4222
#2 0x00000000012d5e78 in cpu_map__delete (map=0x156cc40) at cpumap.c:31
#3 0x00000000012d5f7a in perf_cpu_map__put (map=0x156cc40) at cpumap.c:45
#4 0x00000000012d723a in perf_cpu_map__merge (orig=0x156cc40,
other=0x156cc60) at cpumap.c:343
#5 0x000000000110cdd0 in test__cpu_map_merge (
test=0x14ea6c8 <generic_tests+2856>, subtest=-1) at tests/cpumap.c:128
Thus the perf_cpu_map__put(a) (see (1) above) frees map 'a'
a second time and causes the failure. Fix this be removing that
function call.
Output after:
[root@m35lp76 perf]# ./perf test -Fvvvvv 52
52: Merge cpu map :
--- start ---
cpumask list: 1-2,4-5,7
---- end ----
Merge cpu map: Ok
[root@m35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: http://lore.kernel.org/lkml/20200120132011.64698-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf with CoreSight fails to record trace data with command:
perf record -e cs_etm/@tmc_etr0/u --per-thread ls
failed to set sink "" on event cs_etm/@tmc_etr0/u with 21 (Is a
directory)/perf/
This failure is root caused with the commit 1dc925568f ("perf
parse: Add a deep delete for parse event terms").
The log shows, cs_etm fails to parse the sink attribution; cs_etm event
relies on the event configuration to pass sink name, but the event
specific configuration data cannot be passed properly with flow:
get_config_terms()
ADD_CONFIG_TERM(DRV_CFG, term->val.str);
__t->val.str = term->val.str;
`> __t->val.str is assigned to term->val.str;
parse_events_terms__purge()
parse_events_term__delete()
zfree(&term->val.str);
`> term->val.str is freed and assigned to NULL pointer;
cs_etm_set_sink_attr()
sink = __t->val.str;
`> sink string has been freed.
To fix this issue, in the function get_config_terms(), this patch
changes to use strdup() for allocation a new duplicate string rather
than directly assignment string pointer.
This patch addes a new field 'free_str' in the data structure
perf_evsel_config_term; 'free_str' is set to true when the union is used
as a string pointer; thus it can tell perf_evsel__free_config_terms() to
free the string.
Fixes: 1dc925568f ("perf parse: Add a deep delete for parse event terms")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200117055251.24058-2-leo.yan@linaro.org
[ Use zfree() in perf_evsel__free_config_terms ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
:# modified: tools/perf/util/evsel_config.h
