I consulted Cai Land(Chuntian.Cai@amd.com), he told me corresponding smc
message name to fSMC_MSG_SetWorkloadMask() is
"PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir.
Strange though it may seem, but it's a fact.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Failing to allocate a transfer function during stream construction leads
to a null pointer dereference
[How]
Handle the failed allocation by failing the stream construction
Cc: stable@vger.kernel.org
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated
for very connector. Real eDP caps will be overwritten by other external
display. For OLED panel, caps->aux_support is set to 1 for OLED pnael.
after external connected, caps+.aux_support is set to 0. This causes
OLED backlight adjustment not work.
[How]
within update_conector_ext_caps, backlight caps will be updated only for
eDP connector.
Cc: stable@vger.kernel.org
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevents a warning in the MST create connector case.
v2: create global fake encoders rather per connector fake encoders
to avoid running out of encoder indices.
v3: use the actual number of crtcs on the asic rather than the max
to conserve encoders.
v4: v3 plus missing hunk I forgot to git add.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108
Fixes: c6385e503a ("drm/amdgpu: drop legacy drm load and unload callbacks")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.7.x
Remove signaled jobs from job list and ensure the
job was indeed preempted.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During preemption test for gfx10, it uses kiq to trigger
gfx preemption, which would result in race condition
with flushing TLB for kiq.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we're failing to recalculate the gen9 FBC w/a stride
unless something more drastic than just the modifier itself has
changed. This often leaves us with FBC enabled with the linear
fbdev framebuffer without the w/a stride enabled. That will cause
an immediate underrun and FBC will get promptly disabled.
Fix the problem by checking if the w/a stride is about to change,
and go through the full dance if so. This part of the FBC code
is still pretty much a disaster and will need lots more work.
But this should at least fix the immediate issue.
v2: Deactivate FBC when the modifier changes since that will
likely require resetting the w/a CFB stride
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 0428ab013f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The danger in switching at random upon intel_context_pin is that the
context may still actually be inflight, as it will not be scheduled out
until a context switch after it is complete -- that may be a long time
after we do a final intel_context_unpin.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713160549.17344-1-chris@chris-wilson.co.uk
(cherry picked from commit 90a987205c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We do not use the virtual engines for interrupts (they have physical
components), but we do use them to decouple the fence signaling during
submission. Currently, when we submit a completed request, we try to
enable the interrupt handler for the virtual engine, but we never disarm
it. A quick fix is then to mark the irq as enabled, and it will then
remain enabled -- and this prevents us from waking the device and never
letting it sleep again.
Fixes: f8db4d051b ("drm/i915: Initialise breadcrumb lists on the virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711203236.12330-1-chris@chris-wilson.co.uk
(cherry picked from commit 4fe6abb8f5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which
translation to use when saving restoring the engine general purpose
registers to and from the GT scratch. Since GT scratch is mapped to
ggtt, we need to set an additional bit in the command to use GTT.
Fixes: daed3e4439 ("drm/i915/perf: implement active wait for noa configurations")
Suggested-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit e43ff99c8d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value
at those pointers. This will result in incorrect/unsorted list. Fix it
by deferencing the pointers before comparison.
Fixes: 4ba74e53ad ("drm/i915/selftests: Verify frequency scaling with RPS")
Fixes: 8757797ff9 ("drm/i915/selftests: Repeat the rps clock frequency measurement")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709154931.23310-1-sudeep.holla@arm.com
(cherry picked from commit 2196dfea89)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Got following d_can probe errors with kernel 5.8-rc1 on am437x
[ 10.730822] CAN device driver interface
Starting Wait for Network to be Configured...
[ OK ] Reached target Network.
[ 10.787363] c_can_platform 481cc000.can: probe failed
[ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2
[ 10.799457] c_can_platform 481d0000.can: probe failed
[ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2
actually, Tony has fixed this issue on am335x with the patch [3]
Since am437x has the same clock structure with am335x
[1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.
[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0 ("ARM: dts: Configure osc clock for d_can on
am335x")
Fixes: 1a5cd7c23c ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Signed-off-by: dillon min <dillon.minfei@gmail.com>
[tony@atomide.com: aligned commit message a bit for readability]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix memory leak in omap_hwmod_allocate_module not freeing in
handling error path.
Fixes: 8c87970543b17("ARM: OMAP2+: Add functions to allocate module data from device tree")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
[tony@atomide.com: fix call iounmap for missing regs]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Starting from commit "thermal/int340x_thermal: Don't require IDSP to
exist", priv->current_uuid_index is initialized to -1. This value may
be passed to int3400_thermal_run_osc() from int3400_thermal_set_mode,
contributing to page fault when accessing int3400_thermal_uuids array
at index -1.
This commit adds a check on uuid value to int3400_thermal_run_osc.
Fixes: 8d485da0dd ("thermal/int340x_thermal: Don't require IDSP to exist")
Signed-off-by: Bartosz Szczepanek <bsz@semihalf.com>
Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
[ rzhang: Add Fixes tag ]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200708134613.131555-1-bsz@semihalf.com
There is no guarantee to CMA's placement, so allocating a zone specific
atomic pool from CMA might return memory from a completely different
memory zone. So stop using it.
Fixes: c84dc6e68a ("dma-pool: add additional coherent pools to map to gfp mask")
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When allocating DMA memory from a pool, the core can only guess which
atomic pool will fit a device's constraints. If it doesn't, get a safer
atomic pool and try again.
Fixes: c84dc6e68a ("dma-pool: add additional coherent pools to map to gfp mask")
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma-pool's dev_to_pool() creates the false impression that there is a
way to grantee a mapping between a device's DMA constraints and an
atomic pool. It tuns out it's just a guess, and the device might need to
use an atomic pool containing memory from a 'safer' (or lower) memory
zone.
To help mitigate this, introduce dma_guess_pool() which can be fed a
device's DMA constraints and atomic pools already known to be faulty, in
order for it to provide an better guess on which pool to use.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function is only used once and can be simplified to a one-liner.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma_coherent_ok() checks if a physical memory area fits a device's DMA
constraints.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
fuse_writepages() ignores some errors taken from fuse_writepages_fill() I
believe it is a bug: if .writepages is called with WB_SYNC_ALL it should
either guarantee that all data was successfully saved or return error.
Fixes: 26d614df1d ("fuse: Implement writepages callback")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepages_fill uses following construction:
if (wpa && ap->num_pages &&
(A || B || C)) {
action;
} else if (wpa && D) {
if (E) {
the same action;
}
}
- ap->num_pages check is always true and can be removed
- "if" and "else if" calls the same action and can be merged.
Move checking A, B, C, D, E conditions to a helper, add comments.
Original-patch-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Previous patch changed handling of remount/reconfigure to ignore all
options, including those that are unknown to the fuse kernel fs. This was
done for backward compatibility, but this likely only affects the old
mount(2) API.
The new fsconfig(2) based reconfiguration could possibly be improved. This
would make the new API less of a drop in replacement for the old, OTOH this
is a good chance to get rid of some weirdnesses in the old API.
Several other behaviors might make sense:
1) unknown options are rejected, known options are ignored
2) unknown options are rejected, known options are rejected if the value
is changed, allowed otherwise
3) all options are rejected
Prior to the backward compatibility fix to ignore all options all known
options were accepted (1), even if they change the value of a mount
parameter; fuse_reconfigure() does not look at the config values set by
fuse_parse_param().
To fix that we'd need to verify that the value provided is the same as set
in the initial configuration (2). The major drawback is that this is much
more complex than just rejecting all attempts at changing options (3);
i.e. all options signify initial configuration values and don't make sense
on reconfigure.
This patch opts for (3) with the rationale that no mount options are
reconfigurable in fuse.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The command
mount -o remount -o unknownoption /mnt/fuse
succeeds on kernel versions prior to v5.4 and fails on kernel version at or
after. This is because fuse_parse_param() rejects any unrecognised options
in case of FS_CONTEXT_FOR_RECONFIGURE, just as for FS_CONTEXT_FOR_MOUNT.
This causes a regression in case the fuse filesystem is in fstab, since
remount sends all options found there to the kernel; even ones that are
meant for the initial mount and are consumed by the userspace fuse server.
Fix this by ignoring mount options, just as fuse_remount_fs() did prior to
the conversion to the new API.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
s_op->remount_fs() is only called from legacy_reconfigure(), which is not
used after being converted to the new API.
Convert to using ->reconfigure(). This restores the previous behavior of
syncing the filesystem and rejecting MS_MANDLOCK on remount.
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepages_fill() calls tree_insert() with ap->num_pages = 0 which
triggers the following warning:
WARNING: CPU: 1 PID: 17211 at fs/fuse/file.c:1728 tree_insert+0xab/0xc0 [fuse]
RIP: 0010:tree_insert+0xab/0xc0 [fuse]
Call Trace:
fuse_writepages_fill+0x5da/0x6a0 [fuse]
write_cache_pages+0x171/0x470
fuse_writepages+0x8a/0x100 [fuse]
do_writepages+0x43/0xe0
Fix up the warning and clean up the code around rb-tree insertion:
- Rename tree_insert() to fuse_insert_writeback() and make it return the
conflicting entry in case of failure
- Re-add tree_insert() as a wrapper around fuse_insert_writeback()
- Rename fuse_writepage_in_flight() to fuse_writepage_add() and reverse
the meaning of the return value to mean
+ "true" in case the writepage entry was successfully added
+ "false" in case it was in-fligt queued on an existing writepage
entry's auxiliary list or the existing writepage entry's temporary
page updated
Switch from fuse_find_writeback() + tree_insert() to
fuse_insert_writeback()
- Move setting orig_pages to before inserting/updating the entry; this may
result in the orig_pages value being discarded later in case of an
in-flight request
- In case of a new writepage entry use fuse_writepage_add()
unconditionally, only set data->wpa if the entry was added.
Fixes: 6b2fb79963 ("fuse: optimize writepages search")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Original-path-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In fuse_writepage_end() the old writepages entry needs to be removed from
the rbtree before inserting the new one, otherwise tree_insert() would
fail. This is a very rare codepath and no reproducer exists.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
When putting the port in reset, driver must wait for the soft reset
acknowledgment bit instead of the soft reset bit.
Fixes: 47c1b19c16 (fpga: dfl: afu: add port ops support)
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
This is to fix lkp cppcheck warnings:
drivers/fpga/dfl-pci.c:230:6: warning: The scope of the variable 'ret' can be reduced. [variableScope]
int ret = 0;
^
drivers/fpga/dfl-pci.c:230:10: warning: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Fixes: 3c2760b78f ("fpga: dfl: pci: fix return value of cci_pci_sriov_configure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
The assignment of metadata overwrote the new display resolution values,
hence we'd miss the size actually changed and wouldn't redefine the
surface. This would then lead to command buffer error when trying to
update the screen target (due to the size mismatch), and result in a
VM with black screen.
Fixes: 504901dbb0 ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Cc: stable@vger.kernel.org
Pull input fixes from Dmitry Torokhov:
"A few quirks for the Elan touchpad driver, another Thinkpad is being
switched over from PS/2 to native RMI4 interface, and we gave a brand
new SW_MACHINE_COVER switch definition"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add more hardware ID for Lenovo laptops
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
Revert "Input: elants_i2c - report resolution information for touch major"
Input: elan_i2c - only increment wakeup count on touch
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
ARM: dts: n900: remove mmc1 card detect gpio
Input: add `SW_MACHINE_COVER`
First set of fixes for v5.8. Various important fixes for iwlwifi and
mt76.
iwlwifi
* fix sleeping under RCU
* fix a kernel crash when using compressed firmware images
mt76
* tx queueing fixes for mt7615/22/63
* locking fix
* fix a crash during watchdog reset
* fix memory leaks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJfDJcKAAoJEG4XJFUm622boM4H+wTnBdnamYPASeJ8la5D5hyk
pXcPFYwTVjC48Cs+XWpcib2AQxrgZV8fF9SdbZqqCleZGGXSXsQb6WiaSr7JxFso
gbSaUHhYpfSOXdadNBI0ho/E+NFEsnIcIxMS2BJQTe9AUXCFY3oX56ut0ioSKx4P
rkgqTe0pvYUvLR4EOwCCWUndfrAgARy2KXqNsTmCCb5tXJf2leAjGyVRteX9RJQq
GSooKPrOJRLAiyId17D7kLPc8WHVv1KxBbRUgyC046s67CzDSEBw1jOy6Q2oncvI
ZCow/i7AuZSeSw3t6HRuy4ArMuRCafk1gKEbKw6TTVg47iGHn7JqrCs+l5do7hE=
=10X3
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2020-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.8
First set of fixes for v5.8. Various important fixes for iwlwifi and
mt76.
iwlwifi
* fix sleeping under RCU
* fix a kernel crash when using compressed firmware images
mt76
* tx queueing fixes for mt7615/22/63
* locking fix
* fix a crash during watchdog reset
* fix memory leaks
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
KASAN report null-ptr-deref error when register_netdev() failed:
KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7]
CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12
Call Trace:
ip6gre_init_net+0x4ab/0x580
? ip6gre_tunnel_uninit+0x3f0/0x3f0
ops_init+0xa8/0x3c0
setup_net+0x2de/0x7e0
? rcu_read_lock_bh_held+0xb0/0xb0
? ops_init+0x3c0/0x3c0
? kasan_unpoison_shadow+0x33/0x40
? __kasan_kmalloc.constprop.0+0xc2/0xd0
copy_net_ns+0x27d/0x530
create_new_namespaces+0x382/0xa30
unshare_nsproxy_namespaces+0xa1/0x1d0
ksys_unshare+0x39c/0x780
? walk_process_tree+0x2a0/0x2a0
? trace_hardirqs_on+0x4a/0x1b0
? _raw_spin_unlock_irq+0x1f/0x30
? syscall_trace_enter+0x1a7/0x330
? do_syscall_64+0x1c/0xa0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x56/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.
Fixes: dafabb6590 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On sparc32, tcflag_t is "unsigned long", unlike on all other
architectures, where it is "unsigned int":
drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’:
include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
^~~~~~~
include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
^~~~~~~
As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t
parameters to "unsigned int".
While at it, use "%u" to format unsigned numbers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Including:
- Fix for a use-after-free of the device iommu-group. Found in the
arm-smmu driver, but the fix is in generic code.
- Fix for the new Allwinner IOMMU driver to use the atomic
readl_timeout() variant in IO/TLB flushing code.
- A couple of cleanups to fix various compile warnings.
-----BEGIN PGP SIGNATURE-----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=M7Kn
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a use-after-free of the device iommu-group. Found in the arm-smmu
driver, but the fix is in generic code.
- Fix for the new Allwinner IOMMU driver to use the atomic
readl_timeout() variant in IO/TLB flushing code.
- A couple of cleanups to fix various compile warnings.
* tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused
iommu: Fix use-after-free in iommu_release_device
iommu/amd: Make amd_iommu_apply_ivrs_quirks() static inline
iommu: SUN50I_IOMMU should depend on HAS_DMA
iommu/sun50i: Remove unused variable
iommu/sun50i: Change the readl timeout to the atomic variant
Naresh Kamboju reported that the LTP tests can cause warnings on i386
going back all the way to v5.0, and bisected it to commit 2c91bd4a4e
("mm: speed up mremap by 20x on large regions").
The warning in move_normal_pmd() is actually mostly correct, but we have
a very unusual special case at process creation time, when we may move
the stack down with an overlapping mode (kind of like a "memmove()"
except using the page tables).
And when you have just the right condition of "move a large initial
stack by the right alignment in the end, but with the early part of the
move being only page-aligned", we'll be in a situation where we're
trying to move a normal PMD entry on top of an already existing - but
now empty - PMD entry.
The warning is still worth having, in case it ever triggers other cases,
and perhaps as a reminder that we could do the stack move case more
efficiently (although it's clearly rare enough that it probably doesn't
matter).
But make it do WARN_ON_ONCE(), so that you can't flood the logs with it.
And add a *big* comment above it to explain and remind us what's going
on, because it took some figuring out to see how this could trigger.
Kudos to Joel Fernandes for debugging this.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Debugged-and-acked-by: Joel Fernandes <joel@joelfernandes.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If intel_pstate starts in the passive mode by default (that happens
when the processor in the system doesn't support HWP), passing
intel_pstate=active in the kernel command line doesn't work, so
fix that.
Fixes: 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by default without HWP")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
We used to do this before 3453d5708b, but this was changed to better
handle the NFS4ERR_SEQ_MISORDERED error code. This commit fixed the slot
re-use case when the server doesn't receive the interrupted operation,
but if the server does receive the operation then it could still end up
replying to the client with mis-matched operations from the reply cache.
We can fix this by sending a SEQUENCE to the server while recovering from
a SEQ_MISORDERED error when we detect that we are in an interrupted slot
situation.
Fixes: 3453d5708b (NFSv4.1: Avoid false retries when RPC calls are interrupted)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that the connect worker is awoken if an attempt to establish
a connection is unsuccessful. Otherwise the worker waits forever
and the transport workload hangs.
Connect errors should not attempt to destroy the ep, since the
connect worker continues to use it after the handler runs, so these
errors are now handled independently of DISCONNECTED events.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed that when rpcrdma_xprt_connect() returns -ENOMEM,
instead of retrying the connect, the RPC client kills the
RPC task that requested the connection. We want a retry
here.
Fixes: cb586decbb ("xprtrdma: Make sendctx queue lifetime the same as connection lifetime")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Both Dan and I have observed two processes invoking
rpcrdma_xprt_disconnect() concurrently. In my case:
1. The connect worker invokes rpcrdma_xprt_disconnect(), which
drains the QP and waits for the final completion
2. This causes the newly posted Receive to flush and invoke
xprt_force_disconnect()
3. xprt_force_disconnect() sets CLOSE_WAIT and wakes up the RPC task
that is holding the transport lock
4. The RPC task invokes xprt_connect(), which calls ->ops->close
5. xprt_rdma_close() invokes rpcrdma_xprt_disconnect(), which tries
to destroy the QP.
Deadlock.
To prevent xprt_force_disconnect() from waking anything, handle the
clean up after a failed connection attempt in the xprt's sndtask.
The retry loop is removed from rpcrdma_xprt_connect() to ensure
that the newly allocated ep and id are properly released before
a REJECTED connection attempt can be retried.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In the error paths, there's no need to call kfree(ep) after calling
rpcrdma_ep_put(ep).
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 82046702e2 ("efi/libstub/arm64: Replace 'preferred' offset
with alignment check"), loading a relocatable arm64 kernel at a physical
address which is not 2MB aligned and subsequently booting with EFI will
leave the Image in-place, relying on the kernel to relocate itself early
during boot. In conjunction with commit dd4bc60765 ("arm64: warn on
incorrect placement of the kernel by the bootloader"), which enables
CONFIG_RELOCATABLE by default, this effectively means that entering an
arm64 kernel loaded at an alignment smaller than 2MB with EFI (e.g. using
QEMU) will result in silent relocation at runtime.
Unfortunately, this has a subtle but confusing affect for developers
trying to inspect the PC value during a crash and comparing it to the
symbol addresses in vmlinux using tools such as 'nm' or 'addr2line';
all text addresses will be displaced by a sub-2MB offset, resulting in
the wrong symbol being identified in many cases. Passing "nokaslr" on
the command line or disabling "CONFIG_RANDOMIZE_BASE" does not help,
since the EFI stub only copies the kernel Image to a 2MB boundary if it
is not relocatable.
Adjust the EFI stub for arm64 so that the minimum Image alignment is 2MB
unless KASLR is in use.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
When calculating the clock divider, start dividing at 2 instead of 1.
The divider is divided by two at the end of the calculation, so starting
at 1 may result in a divider of 0, which shouldn't happen.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200709195706.12741-3-eajames@linux.ibm.com
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds
the same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from
Kconfig file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1589494238-2933-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
fsl,ls1021a is a mach under arch/arm/mach-imx/, however it could
not use the soc driver which will break caam on ls1021a platform.
So directly return if it is compatible with fsl,ls1021a.
Fixes: 52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Acer TravelMate B311R-31 laptop's audio (1025:1430) with ALC256
cannot detect the headset microphone until
ALC256_FIXUP_ACER_MIC_NO_PRESENCE quirk maps the NID 0x19 as the headset
mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200713060421.62435-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
