If userspace creates the VCPUs after initializing the VGIC, then we end
up in a situation where we trigger a bug in kvm_vcpu_get_idx(), because
it is called prior to adding the VCPU into the vcpus array on the VM.
There is no tight coupling between the VCPU index and the area of the
redistributor region used for the VCPU, so we can simply ensure that all
creations of redistributors are serialized per VM, and increment an
offset when we successfully add a redistributor.
The vgic_register_redist_iodev() function can be called from two paths:
vgic_redister_all_redist_iodev() which is called via the kvm_vgic_addr()
device attribute handler. This patch already holds the kvm->lock mutex.
The other path is via kvm_vgic_vcpu_init, which is called through a
longer chain from kvm_vm_ioctl_create_vcpu(), which releases the
kvm->lock mutex just before calling kvm_arch_vcpu_create(), so we can
simply take this mutex again later for our purposes.
Fixes: ab6f468c10 ("KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs")
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Current limits with regards to processing program paths do not
really reflect today's needs anymore due to programs becoming
more complex and verifier smarter, keeping track of more data
such as const ALU operations, alignment tracking, spilling of
PTR_TO_MAP_VALUE_ADJ registers, and other features allowing for
smarter matching of what LLVM generates.
This also comes with the side-effect that we result in fewer
opportunities to prune search states and thus often need to do
more work to prove safety than in the past due to different
register states and stack layout where we mismatch. Generally,
it's quite hard to determine what caused a sudden increase in
complexity, it could be caused by something as trivial as a
single branch somewhere at the beginning of the program where
LLVM assigned a stack slot that is marked differently throughout
other branches and thus causing a mismatch, where verifier
then needs to prove safety for the whole rest of the program.
Subsequently, programs with even less than half the insn size
limit can get rejected. We noticed that while some programs
load fine under pre 4.11, they get rejected due to hitting
limits on more recent kernels. We saw that in the vast majority
of cases (90+%) pruning failed due to register mismatches. In
case of stack mismatches, majority of cases failed due to
different stack slot types (invalid, spill, misc) rather than
differences in spilled registers.
This patch makes pruning more aggressive by also adding markers
that sit at conditional jumps as well. Currently, we only mark
jump targets for pruning. For example in direct packet access,
these are usually error paths where we bail out. We found that
adding these markers, it can reduce number of processed insns
by up to 30%. Another option is to ignore reg->id in probing
PTR_TO_MAP_VALUE_OR_NULL registers, which can help pruning
slightly as well by up to 7% observed complexity reduction as
stand-alone. Meaning, if a previous path with register type
PTR_TO_MAP_VALUE_OR_NULL for map X was found to be safe, then
in the current state a PTR_TO_MAP_VALUE_OR_NULL register for
the same map X must be safe as well. Last but not least the
patch also adds a scheduling point and bumps the current limit
for instructions to be processed to a more adequate value.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not use unsigned variables to see if it returns a negative
error or not.
Fixes: 2423496af3 ("ipv6: Prevent overrun when parsing v6 header options")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0a5539f661 ("bpf: Provide a linux/types.h override
for bpf selftests.") caused a build failure for tools/testing/selftest/bpf
because of some missing types:
$ make -C tools/testing/selftests/bpf/
...
In file included from /home/yhs/work/net-next/tools/testing/selftests/bpf/test_pkt_access.c:8:
../../../include/uapi/linux/bpf.h:170:3: error: unknown type name '__aligned_u64'
__aligned_u64 key;
...
/usr/include/linux/swab.h:160:8: error: unknown type name '__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
...
The type __aligned_u64 is defined in linux:include/uapi/linux/types.h.
The fix is to copy missing type definition into
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Adding additional include "string.h" resolves __always_inline issue.
Fixes: 0a5539f661 ("bpf: Provide a linux/types.h override for bpf selftests.")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A few request-based DM and DM multipath fixes for issues that were
made when merging Christoph's changes with Bart's changes for 4.12
- A DM bufio unsigned overflow fix
- A couple pure fixes for the DM cache target.
- Various very small tweaks to the DM cache target that enable
considerable speed improvements in the face of continuous IO. Given
that the cache target was significantly reworked for 4.12 I see no
reason to sit on these advances until 4.13 considering the favorable
results associated with such minimalist tweaks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZHJ6hAAoJEMUj8QotnQNazb4H/2i+OdNU3qEv0wg0Vf2fdWbU
M0FYLDwuEBx+/RCBoJbjLY4enfup2Ak4ykxivt1gDZL4sBY8bsf/jxjgTKD1icp4
tV+6tLFbzVZwp2JtDgbWJ0FuYEfINxNwVJYRUY6dbgsWQPCxKwYAYnYa102no78t
pqykpj/jfQB5ru5bNDVC/KcV8fj+3mc4H7IJxGeEnVzoXyW6wsnvP+6FqOHnuocE
HU2zCzit1nfLtI7eL3I3B5nQKVtkPZoR/ILFyo7viU1EKA9zNEjkLI7EOKrMvPNC
b0H6lqMkoBIWDw22sxkk/utpywFVqQ1K7kyAWTa1XsSsSvritSmZP2k+dCEkk/U=
=5lrV
-----END PGP SIGNATURE-----
Merge tag 'for-4.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a couple DM thin provisioning fixes
- a few request-based DM and DM multipath fixes for issues that were
made when merging Christoph's changes with Bart's changes for 4.12
- a DM bufio unsigned overflow fix
- a couple pure fixes for the DM cache target.
- various very small tweaks to the DM cache target that enable
considerable speed improvements in the face of continuous IO. Given
that the cache target was significantly reworked for 4.12 I see no
reason to sit on these advances until 4.13 considering the favorable
results associated with such minimalist tweaks.
* tag 'for-4.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: handle kmalloc failure allocating background_tracker struct
dm bufio: make the parameter "retain_bytes" unsigned long
dm mpath: multipath_clone_and_map must not return -EIO
dm mpath: don't return -EIO from dm_report_EIO
dm rq: add a missing break to map_request
dm space map disk: fix some book keeping in the disk space map
dm thin metadata: call precommit before saving the roots
dm cache policy smq: don't do any writebacks unless IDLE
dm cache: simplify the IDLE vs BUSY state calculation
dm cache: track all IO to the cache rather than just the origin device's IO
dm cache policy smq: stop preemptively demoting blocks
dm cache policy smq: put newly promoted entries at the top of the multiqueue
dm cache policy smq: be more aggressive about triggering a writeback
dm cache policy smq: only demote entries in bottom half of the clean multiqueue
dm cache: fix incorrect 'idle_time' reset in IO tracker
Pull i2c fixes from Wolfram Sang:
"Here are some bugfixes from I2C, especially removing a wrongly
displayed error message for all i2c muxes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xgene: Set ACPI_COMPANION_I2C
i2c: mv64xxx: don't override deferred probing when getting irq
i2c: mux: only print failure message on error
i2c: mux: reg: rename label to indicate what it does
i2c: mux: reg: put away the parent i2c adapter on probe failure
Michael Chan says:
====================
bnxt_en: DCBX fixes.
2 bug fixes for the case where the NIC's firmware DCBX agent is enabled.
With these fixes, we will return the proper information to lldpad.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, all the host based DCBX settings from lldpad will fail if the
firmware DCBX agent is running.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current code, bnxt_dcb_init() is called too early before we
determine if the firmware DCBX agent is running or not. As a result,
we are not setting the DCB_CAP_DCBX_HOST and DCB_CAP_DCBX_LLD_MANAGED
flags properly to report to DCBNL.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_INET is not set, net/core/sock.c can not compile :
net/core/sock.c: In function ‘skb_orphan_partial’:
net/core/sock.c:1810:2: error: implicit declaration of function
‘skb_is_tcp_pure_ack’ [-Werror=implicit-function-declaration]
if (skb_is_tcp_pure_ack(skb))
^
Fix this by always including <net/tcp.h>
Fixes: f6ba8d33cf ("netem: fix skb_orphan_partial()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ftrace function_graph time measurements of a given function is not
accurate according to those recorded by ftrace using the function
filters. This change pulls the x86_64 fix from 'commit 722b3c7469
("ftrace/graph: Trace function entry before updating index")' into the
sparc specific prepare_ftrace_return which stops ftrace from
counting interrupted tasks in the time measurement.
Example measurements for select_task_rq_fair running "hackbench 100
process 1000":
| tracing/trace_stat/function0 | function_graph
Before patch | 2.802 us | 4.255 us
After patch | 2.749 us | 3.094 us
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greetings,
GCC 7 introduced the -Wstringop-overflow flag to detect buffer overflows
in calls to string handling functions [1][2]. Due to the way
``empty_zero_page'' is declared in arch/sparc/include/setup.h, this
causes a warning to trigger at compile time in the function mem_init(),
which is subsequently converted to an error. The ensuing patch fixes
this issue and aligns the declaration of empty_zero_page to that of
other architectures. Thank you.
Cheers,
Orlando.
[1] https://gcc.gnu.org/ml/gcc-patches/2016-10/msg02308.html
[2] https://gcc.gnu.org/gcc-7/changes.html
Signed-off-by: Orlando Arias <oarias@knights.ucf.edu>
--------------------------------------------------------------------------------
Signed-off-by: David S. Miller <davem@davemloft.net>
An incorrect huge page alignment check caused
mmap failure for 64K pages when MAP_FIXED is used
with address not aligned to HPAGE_SIZE.
Orabug: 25885991
Fixes: dcd1912d21 ("sparc64: Add 64K page size support")
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 61562f981e ("uapi: export all arch specifics
directories"), "make INSTALL_HDR_PATH=$root/usr headers_install"
deletes standard glibc headers and others in $(root)/usr/include.
The cause of the issue is that headers_install now starts descending
from arch/$(hdr-arch)/include/uapi with $(root)/usr/include for its
destination when installing asm headers. So, headers already there
are assumed to be unwanted.
When headers_install starts descending from include/uapi with
$(root)/usr/include for its destination, it works around the problem
by creating an dummy destination $(root)/usr/include/uapi, but this
is tricky.
To fix the problem in a clean way is to skip headers install/check
in include/uapi and arch/$(hdr-arch)/include/uapi because we know
there are only sub-directories in uapi directories. A good side
effect is the empty destination $(root)/usr/include/uapi will go
away.
I am also removing the trailing slash in the headers_check target to
skip checking in arch/$(hdr-arch)/include/uapi.
Fixes: 61562f981e ("uapi: export all arch specifics directories")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped
kzalloc) can fail so add the missing sanity check to avoid dereferencing
a NULL pointer.
Fixes: fe14042358 ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree")
Cc: stable <stable@vger.kernel.org> # 2.6.38
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix the following compile error found on odroid-xu4:
checks.c: In function ‘check_simple_bus_reg’:
checks.c:876:41: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘uint64_t{aka long long unsigned int}’ [-Werror=format=]
snprintf(unit_addr, sizeof(unit_addr), "%lx", reg);
^
checks.c:876:41: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type
‘uint64_t {aka long long unsigned int}’ [-Werror=format=]
cc1: all warnings being treated as errors
Makefile:304: recipe for target 'checks.o' failed
make: *** [checks.o] Error 1
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
[dwg: Correct new format to be correct in general]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[robh: cherry-picked from upstream dtc commit 2a42b14d0d03]
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, cpus_set_cap() calls static_branch_enable_cpuslocked(), which
must take the jump_label mutex.
We call cpus_set_cap() in the secondary bringup path, from the idle
thread where interrupts are disabled. Taking a mutex in this path "is a
NONO" regardless of whether it's contended, and something we must avoid.
We didn't spot this until recently, as ___might_sleep() won't warn for
this case until all CPUs have been brought up.
This patch avoids taking the mutex in the secondary bringup path. The
poking of static keys is deferred until enable_cpu_capabilities(), which
runs in a suitable context on the boot CPU. To account for the static
keys being set later, cpus_have_const_cap() is updated to use another
static key to check whether the const cap keys have been initialised,
falling back to the caps bitmap until this is the case.
This means that users of cpus_have_const_cap() gain should only gain a
single additional NOP in the fast path once the const caps are
initialised, but should always see the current cap value.
The hyp code should never dereference the caps array, since the caps are
initialized before we run the module initcall to initialise hyp. A check
is added to the hyp init code to document this requirement.
This change will sidestep a number of issues when the upcoming hotplug
locking rework is merged.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyniger <marc.zyngier@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It's a common practice to send gratuitous ARPs after moving an
IP address to another device to speed up healing of a service. To
fulfill service availability constraints, the timing of network peers
updating their caches to point to a new location of an IP address can be
particularly important.
Sometimes neigh_update calls won't touch neither lladdr nor state, for
example if an update arrives in locktime interval. The neigh->updated
value is tested by the protocol specific neigh code, which in turn
will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the
call to neigh_update() or not. As a result, we may effectively ignore
the update request, bailing out of touching the neigh entry, except that
we still bump its timestamps inside neigh_update.
This may be a problem for updates arriving in quick succession. For
example, consider the following scenario:
A service is moved to another device with its IP address. The new device
sends three gratuitous ARP requests into the network with ~1 seconds
interval between them. Just before the first request arrives to one of
network peer nodes, its neigh entry for the IP address transitions from
STALE to DELAY. This transition, among other things, updates
neigh->updated. Once the kernel receives the first gratuitous ARP, it
ignores it because its arrival time is inside the locktime interval. The
kernel still bumps neigh->updated. Then the second gratuitous ARP
request arrives, and it's also ignored because it's still in the (new)
locktime interval. Same happens for the third request. The node
eventually heals itself (after delay_first_probe_time seconds since the
initial transition to DELAY state), but it just wasted some time and
require a new ARP request/reply round trip. This unfortunate behaviour
both puts more load on the network, as well as reduces service
availability.
This patch changes neigh_update so that it bumps neigh->updated (as well
as neigh->confirmed) only once we are sure that either lladdr or entry
state will change). In the scenario described above, it means that the
second gratuitous ARP request will actually update the entry lladdr.
Ideally, we would update the neigh entry on the very first gratuitous
ARP request. The locktime mechanism is designed to ignore ARP updates in
a short timeframe after a previous ARP update was honoured by the kernel
layer. This would require tracking timestamps for state transitions
separately from timestamps when actual updates are received. This would
probably involve changes in neighbour struct. Therefore, the patch
doesn't tackle the issue of the first gratuitous APR ignored, leaving
it for a follow-up.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When arp_accept is 1, gratuitous ARPs are supposed to override matching
entries irrespective of whether they arrive during locktime. This was
implemented in commit 56022a8fdd ("ipv4: arp: update neighbour address
when a gratuitous arp is received and arp_accept is set")
There is a glitch in the patch though. RFC 2002, section 4.6, "ARP,
Proxy ARP, and Gratuitous ARP", defines gratuitous ARPs so that they can
be either of Request or Reply type. Those Reply gratuitous ARPs can be
triggered with standard tooling, for example, arping -A option does just
that.
This patch fixes the glitch, making both Request and Reply flavours of
gratuitous ARPs to behave identically.
As per RFC, if gratuitous ARPs are of Reply type, their Target Hardware
Address field should also be set to the link-layer address to which this
cache entry should be updated. The field is present in ARP over Ethernet
but not in IEEE 1394. In this patch, I don't consider any broadcasted
ARP replies as gratuitous if the field is not present, to conform the
standard. It's not clear whether there is such a thing for IEEE 1394 as
a gratuitous ARP reply; until it's cleared up, we will ignore such
broadcasts. Note that they will still update existing ARP cache entries,
assuming they arrive out of locktime time interval.
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On dra7, as per TRM, the HW shutdown (TSHUT) temperature is hardcoded
to 123C and cannot be modified by SW. This means when the temperature
reaches 123C HW asserts TSHUT output which signals a warm reset.
This reset is held until the temperature goes below the TSHUT low (105C).
While in SW, the thermal driver continuously monitors current temperature
and takes decisions based on whether it reached an alert or a critical point.
The intention of setting a SW critical point is to prevent force reset by HW
and instead do an orderly_poweroff(). But if the SW critical temperature is
greater than or equal to that of HW then it defeats the purpose. To address
this and let SW take action before HW does keep the SW critical temperature
less than HW TSHUT value.
The value for SW critical temperature was chosen as 120C just to ensure
we give SW sometime before HW catches up.
Document reference
SPRUI30C – DRA75x, DRA74x Technical Reference Manual - November 2016
SPRUHZ6H - AM572x Technical Reference Manual - November 2016
Tested on:
DRA75x PG 2.0 Rev H EVM
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently there is no kmalloc failure check on the allocation of
the background_tracker struct in btracker_create(), and so a NULL return
will lead to a NULL pointer dereference. Add a NULL check.
Detected by CoverityScan, CID#1416587 ("Dereference null return value")
Fixes: b29d4986d ("dm cache: significant rework to leverage dm-bio-prison-v2")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
With ACPI, i2c-core requires ACPI companion to be set in order for it
to create slave device.
This patch sets the ACPI companion accordingly.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The page table dump code doesn't know about huge pages, so currently
it crashes (or walks random memory, usually leading to a crash), if it
finds a huge page. On Book3S we only see huge pages in the Linux page
tables when we're using the P9 Radix MMU.
Teaching the code to properly handle huge pages is a bit more involved,
so for now just prevent the crash.
Cc: stable@vger.kernel.org # v4.10+
Fixes: 8eb07b1870 ("powerpc/mm: Dump linux pagetables")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no reason to use platform_get_irq() for non-DT probing and
irq_of_parse_and_map() for DT probing. Indeed, platform_get_irq()
works fine for both.
In addition, using platform_get_irq() properly returns -EPROBE_DEFER
when the interrupt controller is not yet available, so instead of
inventing our own error code (-ENXIO), return the one provided by
platform_get_irq().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We now reference the arp_tbl, which requires IPv4 support to be
enabled in the kernel, otherwise we get a link error:
drivers/net/built-in.o: In function `mlx5e_tc_update_neigh_used_value':
(.text+0x16afec): undefined reference to `arp_tbl'
drivers/net/built-in.o: In function `mlx5e_rep_neigh_init':
en_rep.c:(.text+0x16c16d): undefined reference to `arp_tbl'
drivers/net/built-in.o: In function `mlx5e_rep_netevent_event':
en_rep.c:(.text+0x16cbb5): undefined reference to `arp_tbl'
This adds a Kconfig dependency for it.
Fixes: 232c001398 ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some fio benchmarks, halt_poll_ns=400000 caused CPU utilization to
increase heavily even in cases where the performance improvement was
small. In particular, bandwidth divided by CPU usage was as much as
60% lower.
To some extent this is the expected effect of the patch, and the
additional CPU utilization is only visible when running the
benchmarks. However, halving the threshold also halves the extra
CPU utilization (from +30-130% to +20-70%) and has no negative
effect on performance.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Change the type of the parameter "retain_bytes" from unsigned to
unsigned long, so that on 64-bit machines the user can set more than
4GiB of data to be retained.
Also, change the type of the variable "count" in the function
"__evict_old_buffers" to unsigned long. The assignment
"count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];"
could result in unsigned long to unsigned overflow and that could result
in buffers not being freed when they should.
While at it, avoid division in get_retain_buffers(). Division is slow,
we can change it to shift because we have precalculated the log2 of
block size.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In general, rtnetlink dumps do not anticipate failure to dump a single
object (e.g., link or route) on a single pass. As both route and link
objects have grown via more attributes, that is no longer a given.
netlink dumps can handle a failure if the dump function returns an
error; specifically, netlink_dump adds the return code to the response
if it is <= 0 so userspace is notified of the failure. The missing
piece is the rtnetlink dump functions returning the error.
Fix route and link dump functions to return the errors if no object is
added to an skb (detected by skb->len != 0). IPv6 route dumps
(rt6_dump_route) already return the error; this patch updates IPv4 and
link dumps. Other dump functions may need to be ajusted as well.
Reported-by: Jan Moskyto Matejka <mq@ucw.cz>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver explicitly bypasses APIs to register all memory once a
connection is made, and thus allows remote access to memory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SMC enables remote access to physical memory when a user
has successfully configured and established an SMC-connection until ten
minutes after the last SMC connection is closed. Because this is considered
a security risk, drivers are supposed to use IB_PD_UNSAFE_GLOBAL_RKEY in
such a case.
This patch changes the current SMC code to use IB_PD_UNSAFE_GLOBAL_RKEY.
This improves user awareness, but does not remove the security risk itself.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the internal pstore API refactoring, the EFI vars read entry was
accidentally made to update a stack variable instead of the pstore
private data pointer. This corrects the problem (and removes the now
needless argument).
Fixes: 125cc42baf ("pstore: Replace arguments for read() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull bugfixes from the i2c mux subsubsystem:
This fixes an old bug in resource cleanup on failure in i2c-mux-reg and
a new log spamming bug from this merge window in the i2c-mux core.
The skb->dev that is passed into ip_mr_input is
the loX device for VRFs. When we lookup a vif
for this dev, none is found as we do not create
vifs for loopbacks. Instead lookup a vif for the
actual device that the packet was received on,
eg the vlan.
Signed-off-by: Thomas Winter <Thomas.Winter@alliedtelesis.co.nz>
cc: David Ahern <dsa@cumulusnetworks.com>
cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
cc: roopa <roopa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_ack() can call tcp_fragment() which may dededuct the
value tp->fackets_out when MSS changes. When prior_fackets
is larger than tp->fackets_out, tcp_clean_rtx_queue() can
invoke tcp_update_reordering() with negative values. This
results in absurd tp->reodering values higher than
sysctl_tcp_max_reordering.
Note that tcp_update_reordering indeeds sets tp->reordering
to min(sysctl_tcp_max_reordering, metric), but because
the comparison is signed, a negative metric always wins.
Fixes: c7caf8d3ed ("[TCP]: Fix reord detection due to snd_una covered holes")
Reported-by: Rebecca Isaacs <risaacs@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull s390 fixes from Martin Schwidefsky:
- convert the debug feature to refcount_t
- reduce the copy size for strncpy_from_user
- 8 bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/virtio: change virtio_feature_desc:features type to __le32
s390: convert debug_info.ref_count from atomic_t to refcount_t
s390: move _text symbol to address higher than zero
s390/qdio: increase string buffer size
s390/ccwgroup: increase string buffer size
s390/topology: let topology_mnest_limit() return unsigned char
s390/uaccess: use sane length for __strncpy_from_user()
s390/uprobes: fix compile for !KPROBES
s390/ftrace: fix compile for !MODULES
s390/cputime: fix incorrect system time
The width needs to be configured in bytes with 1 meaning 8-bit
access and 2 meaning 16-bit access.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix commit 05c4ffc3a2 ("ARM: dts: LogicPD Torpedo: Add MT9P031 Support")
In the previous commit, I indicated that the only testing was done by
showing the camera showed up when probing. This patch fixes an incorrect
pin muxing on cam_d0, cam_d1 and cam_d2.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The CEC pin was always pulled up, making it impossible to use it.
Change to PIN_INPUT so it can be used by the new CEC support.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The clock polarity setting of the mcbsp connected to
the modem was wrong so almost only noise
was received.
With this patch it is also the same as it was on
earlier non-dt kernels where it was working properly
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add power hold and power controller properties to palmas node.
This is needed to shutdown pmic correctly on boards with
powerhold set.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We yield the kvm->mmu_lock occassionaly while performing an operation
(e.g, unmap or permission changes) on a large area of stage2 mappings.
However this could possibly cause another thread to clear and free up
the stage2 page tables while we were waiting for regaining the lock and
thus the original thread could end up in accessing memory that was
freed. This patch fixes the problem by making sure that the stage2
pagetable is still valid after we regain the lock. The fact that
mmu_notifer->release() could be called twice (via __mmu_notifier_release
and mmu_notifier_unregsister) enhances the possibility of hitting
this race where there are two threads trying to unmap the entire guest
shadow pages.
While at it, cleanup the redudant checks around cond_resched_lock in
stage2_wp_range(), as cond_resched_lock already does the same checks.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: andreyknvl@google.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Make sure we don't use a cached value of the KVM stage2 PGD while
resetting the PGD.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Commit 22d8b3dec2 ("powerpc/kprobes: Emulate instructions on kprobe
handler re-entry") enabled emulating instructions on kprobe re-entry,
rather than single-stepping always. However, we didn't update the single
stepping code to only be run if the emulation fails. Also, we missed
re-enabling preemption if the instruction emulation was successful. Fix
those issues.
Fixes: 22d8b3dec2 ("powerpc/kprobes: Emulate instructions on kprobe handler re-entry")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 17ed4c8f81 ("powerpc/powernv: Recover correct PACA on wakeup
from a stop on P9 DD1") promises to set the NAPSTATELOST bit in paca
after recovering the correct paca for the thread waking up from stop1
on DD1, so that the GPRs can be correctly restored on the stop exit
path. However, it loads the value 1 into r3, but stores the value in
r0 into NAPSTATELOST(r13).
Fix this by correctly set the NAPSTATELOST bit in paca after
recovering the paca on POWER9 DD1.
Fixes: 17ed4c8f81 ("powerpc/powernv: Recover correct PACA on wakeup from a stop on P9 DD1")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Test that the VMX checkpointed register state is maintained when a VMX
unavailable exception is taken during a transaction.
Thanks to Breno Leitao <brenohl@br.ibm.com> and
Gustavo Bueno Romero <gromero@br.ibm.com> for the original test this
is based heavily on.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Add to .gitignore, always build it 64-bit to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull networking fixes from David Miller:
1) Track alignment in BPF verifier so that legitimate programs won't be
rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures.
2) Make tail calls work properly in arm64 BPF JIT, from Deniel
Borkmann.
3) Make the configuration and semantics Generic XDP make more sense and
don't allow both generic XDP and a driver specific instance to be
active at the same time. Also from Daniel.
4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov.
5) Fix use-after-free in VRF driver, from Gao Feng.
6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in
qca_spi driver, from Stefan Wahren.
7) Always run cleanup routines in BPF samples when we get SIGTERM, from
Andy Gospodarek.
8) The mdio phy code should bring PHYs out of reset using the shared
GPIO lines before invoking bus->reset(). From Florian Fainelli.
9) Some USB descriptor access endian fixes in various drivers from
Johan Hovold.
10) Handle PAUSE advertisements properly in mlx5 driver, from Gal
Pressman.
11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed.
12) Cure netdev leak in AF_PACKET when using timestamping via control
messages. From Douglas Caetano dos Santos.
13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav
Lichvar.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
ldmvsw: stop the clean timer at beginning of remove
ldmvsw: unregistering netdev before disable hardware
net: netcp: fix check of requested timestamping filter
ipv6: avoid dad-failures for addresses with NODAD
qed: Fix uninitialized data in aRFS infrastructure
mdio: mux: fix device_node_continue.cocci warnings
net/packet: fix missing net_device reference release
net/mlx4_core: Use min3 to select number of MSI-X vectors
macvlan: Fix performance issues with vlan tagged packets
net: stmmac: use correct pointer when printing normal descriptor ring
net/mlx5: Use underlay QPN from the root name space
net/mlx5e: IPoIB, Only support regular RQ for now
net/mlx5e: Fix setup TC ndo
net/mlx5e: Fix ethtool pause support and advertise reporting
net/mlx5e: Use the correct pause values for ethtool advertising
vmxnet3: ensure that adapter is in proper state during force_close
sfc: revert changes to NIC revision numbers
net: ch9200: add missing USB-descriptor endianness conversions
net: irda: irda-usb: fix firmware name on big-endian hosts
net: dsa: mv88e6xxx: add default case to switch
...
Pull cifs fixes from Steve French:
"A set of minor cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Minor cleanup of xattr query function
fs: cifs: transport: Use time_after for time comparison
SMB2: Fix share type handling
cifs: cifsacl: Use a temporary ops variable to reduce code length
Don't delay freeing mids when blocked on slow socket write of request
CIFS: silence lockdep splat in cifs_relock_file()
