The new work with converting the trace hooks over to markers broke the
command line recording of ftrace. This patch fixes it again.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
While debugging latencies in the RT kernel, I found that it would be nice
to be able to filter away functions from the trace than just to filter
on functions.
I added a new interface to the debugfs tracing directory called
set_ftrace_notrace
When dynamic frace is enabled, this lets you filter away functions that will
not be recorded in the trace. It is similar to adding 'notrace' to those
functions but by doing it without recompiling the kernel.
Here's how set_ftrace_filter and set_ftrace_notrace interact. Remember, if
set_ftrace_filter is set, it removes all functions from the trace execpt for
those listed in the set_ftrace_filter. set_ftrace_notrace will prevent those
functions from being traced.
If you were to set one function in both set_ftrace_filter and
set_ftrace_notrace and that function was the same, then you would end up
with an empty trace.
the set of functions to trace is:
set_ftrace_filter == empty then
all functions not in set_ftrace_notrace
else
set of the set_ftrace_filter and not in set of set_ftrace_notrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Printing out new max latencies was fine for the old RT tracer. But for
mainline it is a bit messy. We also need to test if the run queue
is locked before we can do the print. This means that we may not be
printing out latencies if the run queue is locked on another CPU.
This produces inconsistencies in the output.
This patch simply removes the print altogether.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds function tracing to the functions that are called
on the CPU of the task being traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The check_pages function is called often enough that it can cause problems
with trace outputs or even bringing the system to a halt.
This patch limits the check_pages to the places that are most likely to
have problems. The check is made at the flip between the global array and
the max save array, as well as when the size of the buffers changes and
the self tests.
This patch also removes the BUG_ON from check_pages and replaces it with
a WARN_ON and disabling of the tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that ftrace is being ported to other architectures, it has become
apparent that DYNAMIC_FTRACE is dependent on whether or not that
architecture implements dynamic ftrace. FTRACE itself may be ported to
an architecture without porting dynamic ftrace.
This patch adds HAVE_DYNAMIC_FTRACE to allow architectures to port ftrace
without having to also port the dynamic aspect as well.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds full support for ftrace for PowerPC (both 64 and 32 bit).
This includes dynamic tracing and function filtering.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
David S. Miller noticed the following bug: the -pg instrumentation
function callback is named differently on each platform. On x86 it
is mcount, on sparc it is _mcount. So the export does not make sense
in kernel/trace/ftrace.c - move it to x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It causes unaligned access traps on platforms like sparc
(ftrace_page may be marked packed, but once we return
a dyn_ftrace sub-object from this array to another piece
of code, the "packed" part of the typing information doesn't
propagate).
But also, it didn't serve any purpose either. Even if packed,
on 64-bit or 32-bit, it didn't give us any more dyn_ftrace
entries per-page.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Porting ftrace to the marker infrastructure.
Don't need to chain to the wakeup tracer from the sched tracer, because markers
support multiple probes connected.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently there is no protection from the root user to use up all of
memory for trace buffers. If the root user allocates too many entries,
the OOM killer might start kill off all tasks.
This patch adds an algorith to check the following condition:
pages_requested > (freeable_memory + current_trace_buffer_pages) / 4
If the above is met then the allocation fails. The above prevents more
than 1/4th of freeable memory from being used by trace buffers.
To determine the freeable_memory, I made determine_dirtyable_memory in
mm/page-writeback.c global.
Special thanks goes to Peter Zijlstra for suggesting the above calculation.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Refactor code from tracing_read_pipe() and create trace_seq_to_user().
Moved trace_seq_reset() call before iter->trace->read() call so that
when all leftover data is returned, trace_seq is reset automatically.
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Due to debug hooks in the kernel that can change the way smp_processor_id
works, use raw_smp_processor_id in mcount called functions (namely
ftrace_record_ip). Currently we annotate most debug functions from calling
mcount, but we should not rely on that to prevent kernel lockups.
This patch uses the raw_smp_processor_id to prevent a recusive crash
that can happen if a debug hook in smp_processor_id calls mcount.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In resetting the iterator in read_pipe, the reset of pos was
postitioned in the wrong location with respect to the memset
operation. The current code sets pos, incorrectly, to zero.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a method for open_pipe and open_read to the pluggins
so that they can add a header to the trace pipe call.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch sets up the infrastructure to record overruns of the tracing
buffer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In cleaning up of the sched_switch code, the function trace recording
of task comms was removed. This patch adds back the recording of comms
for function trace. The output of ftrace now has the task comm instead
of <...>.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is first installment of adding documentation to the ftrace.
Expect many more patches of this kind in the near future.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Currently ftrace allocates a trace buffer for every possible CPU.
Work is being done to change it to only online CPUs and add hooks
to hotplug CPUS.
This patch lays out the infrastructure for such a change.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andrew Morton suggested using strict_strtoul over simple_strtoul.
This patch replaces them in ftrace.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andrew Morton mentioned some clean ups that should be done to ftrace.
This patch does some of the simple clean ups.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds /debug/tracing/trace_entries that allows users to
see as well as modify the number of trace entries the buffers hold.
The number of entries only increments in ENTRIES_PER_PAGE which is
calculated by the size of an entry with the number of entries that
can fit in a page. The user does not need to use an exact size, but
the entries will be rounded to one of the increments.
Trying to set the entries to 0 will return with -EINVAL.
To avoid race conditions, the modification of the buffer size can only
be done when tracing is completely disabled (current_tracer == none).
A info message will be printed if a user tries to modify the buffer size
when not set to none.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The wakeup selftest used an internal API for setting the test task priority.
This patch fixes it to use the proper API for performing such a task.
Thanks goes to Randy Dunlap for pointing out this build failure.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch implements "NONBLOCK" for trace_pipe. If the trace_pipe is opened
with O_NONBLOCK, then the trace_pipe read will not block when buffer is empty.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Break out of while loop with EOF when the current_trace changes.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The trace iterator is reset in the read. We still need to restore the tracer
that the trace_pipe was opened with.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We expect things like "cat" to block on reads to trace_pipe. That's what
trace_pipe is for.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The conversion of task states to a character in the sched_switch tracer (part
of latency tracer infrastructure), seems to be incorrect. We currently do it
by indexing into the state_to_char array using the state value. The state
values do not map directly into the array index and are thus incorrect. The
following patch addresses this issue. This is also what is being done even
in the show_task() routine in kernel/sched.c
The patch has been compile and run tested.
Signed-off-by: Ankita Garg <ankita@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is a slight race condition in the selftest where the max update
of the wakeup and irqs/preemption off tests can be doing a max update as
the buffers are being tested. If this happens the system can crash with
a GPF.
This patch adds the max update spinlock around the checking of the
buffers to prevent such a race.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the trace output changes on reading the trace files, there is a chance
that the start function will return NULL. If the start function of a sequence
returns NULL the stop equivalent is not called. In this case, all locks
that are taken must be released even if they are released in the stop function.
This patch fixes a case that a mutex was not released on return of NULL
in the start sequence function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When dynamic ftrace fails and sets itself disabled, the ftraced daemon
will go back to sleep everytime it wakes up. The setting of the
ftraced state to UNINTERRUPTIBLE is skipped in this process, and the
daemon takes up 100% of the CPU. This patch makes sure the ftraced daemon
sets itself to UNINTERRUPTIBLE in that loop.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Lock debugging enabled cause huge performance problems for tracing. Having
the lock verification happening for every function that is called
because mcount calls spin_lock can cripple the system.
This patch converts the spin_locks used by ftrace into raw_spin_locks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch changes the use of __get_cpu_var to explicitly calling
raw_smp_processor_id and using the per_cpu() macro. On some debug
configurations, the use of __get_cpu_var may cause ftrace to trigger
and this can cause problems with the irqsoff tracing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With the adding of the configuration changes in the Makefile to prevent
tracing of functions in the ftrace code, all tracing of all the ftrace
code has been removed. Unfortunately, one of the selftests, relied on
a function to be traced. With the new change, the function was no longer
traced and the test failed.
This patch separates out the test function into its own file so that
we can add the "-pg" flag to the compilation of that function and the
adding of the mcount call to that function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The selftest validation code checks for valid entries in the trace buffer.
TRACE_STACK and TRACE_SPECIAL have been added to the code but not to
the validator. This patch adds the two to prevent them from flagging a
failure in the selftest.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
printk called from wakeup critical timings and irqs off can
cause deadlocks since printk might do a wakeup itself. If the
call to printk happens with the runqueue lock held, it can
deadlock.
This patch protects the printk from being called in trace irqs off
with a test to see if the runqueue for the current CPU is locked.
If it is locked, the printk is skipped.
The wakeup always holds the runqueue lock, so the printk is
simply removed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
trace_function is called by mcount and calling wake_up from that
can have unpredictable results. This patch removes the wakeup from
trace_function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
