The powernow-k8 driver will do checks at startup that the current
active driver is acpi-cpufreq and show a warning when they're not
expected.
Because of this the following warning comes up on systems that
support amd-pstate and compiled in both drivers:
`WTF driver: amd-pstate`
The systems that support powernow-k8 will not support amd-pstate,
so re-order the checks to validate the CPU model number first to
avoid this warning being displayed on modern SOCs.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the platform firmware indicates that it does not support CPPC by
clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the
platform _OSC capabilities mask, avoid attempting to evaluate _CPC
which may fail in that case.
Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only
added to the supported platform capabilities mask on x86, when
X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless
in the other cases.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Revert commit 159d8c274f ("ACPI: Pass the same capabilities to the
_OSC regardless of the query flag") which caused legitimate usage
scenarios (when the platform firmware does not want the OS to control
certain platform features controlled by the system bus scope _OSC) to
break and was misguided by some misleading language in the _OSC
definition in the ACPI specification (in particular, Section 6.2.11.1.3
"Sequence of _OSC Calls" that contradicts other perts of the _OSC
definition).
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com
Reported-by: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Drop a redundant backslash character at the end of a line in the
spr_cstates[] definition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Commit bf9282dc26 ("cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic")
moved the leave_mm() call away from intel_idle(), but it didn't update
its kerneldoc comment accordingly, so do that now.
Fixes: bf9282dc26 ("cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working
native and video interface. However the default detection mechanism first
registers the video interface before unregistering it again and switching
to the native interface during boot. This results in a dangling SBIOS
request for backlight change for some reason, causing the backlight to
switch to ~2% once per boot on the first power cord connect or disconnect
event. Setting the native interface explicitly circumvents this buggy
behaviour by avoiding the unregistering process.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 6d4e5c570c ("net: dsa: get port type at parse time")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'
This happens if panel-edp.ko has been configured with
DRM_PANEL_EDP=y
DRM_DP_HELPER=y
DRM_KMS_HELPER=m
which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.
To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3755d35ee1 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/478296/
Backmerging drm/drm-fixes for commit 3755d35ee1 ("drm/panel: Select
DRM_DP_HELPER for DRM_PANEL_EDP").
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
A recent change to how the SMB3 server (socket) and session status
is managed regressed multiuser mounts by changing the check
for whether session setup is needed to the socket (TCP_Server_info)
structure instead of the session struct (cifs_ses). Add additional
check in cifs_setup_sesion to fix this.
Fixes: 73f9bfbe3d ("cifs: maintain a state machine for tcp/smb/tcon sessions")
Reported-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This kind of interface doesn't have a mac header. This patch fixes
bpf_redirect() to a PIM interface.
Fixes: 27b29f6305 ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ->has_evfd flag, which is true IFF there is an eventfd attached, and
use it to hide io_eventfd_signal() into __io_commit_cqring_flush() and
combine fast checks in a single if. Also, gcc 11.2 wasn't inlining
io_cqring_ev_posted() without this change, so helps with that as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f6168471997decded475a063f92915787975a30b.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_commit_cqring() is currently always under spinlock section, so it's
always better to keep it as slim as possible. Move
__io_commit_cqring_flush() out of it into ev_posted*(). If fast checks
do fail and this post-processing is required, we'll reacquire
->completion_lock, which is fine as we don't care about performance of
draining and offset timeouts.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ec4e81fd720d3bc7bca8cb9152e080dad1a052f1.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
smp_mb() in io_cqring_ev_posted_iopoll() is only there because of
waitqueue_active(). However, non-SQPOLL IOPOLL ring doesn't wake the CQ
and so the barrier there is useless. Kill it, it's usually pretty
expensive.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d72e8ef6f7a3f6a72e18fad8409f7d47afc8da7d.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's never a good idea to put provided buffers without notifying the
userspace, it'll lead to userspace leaks, so add io_put_kbuf() in
io_req_complete_failed(). The fail helper is called by all sorts of
requests, but it's still safe to do as io_put_kbuf() will return 0 in
for all requests that don't support and so don't expect provided buffers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a4880106fcf199d5810707fe2d17126fcdf18bc4.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_fill_cqe*() is not always the best way to post CQEs just because
there is enough of infrastructure on top. Replace a raw call to a
variant of it inside of io_timeout_cancel(), which also saves us some
bloating and might help with batching later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/46113ec4345764b4aef3b384ce38cceabaeedcbb.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With commit "io_uring: cache req->apoll->events in req->cflags" applied,
we now have just io_poll_remove_entries() dipping into req->apoll when
it isn't strictly necessary.
Mark poll and double-poll with a flag, so we know if we need to look
at apoll->double_poll. This avoids pulling in those cachelines if we
don't need them. The common case is that the poll wake handler already
removed these entries while hot off the completion path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we arm poll on behalf of a different type of request, like a network
receive, then we allocate req->apoll as our poll entry. Running network
workloads shows io_poll_check_events() as the most expensive part of
io_uring, and it's all due to having to pull in req->apoll instead of
just the request which we have hot already.
Cache poll->events in req->cflags, which isn't used until the request
completes anyway. This isn't strictly needed for regular poll, where
req->poll.events is used and thus already hot, but for the sake of
unification we do it all around.
This saves 3-4% of overhead in certain request workloads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The existing description of mem= does not cover all the cases and
differences between how architectures treat it.
Extend the description to match the code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220310082736.1346366-1-rppt@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
At least the qemu virtual machine does not provide D- and I-caches,
so skip triggering SMP irqs to flush caches on such machines.
Further optimize the caching code by using static branches and making
some functions static.
Signed-off-by: Helge Deller <deller@gmx.de>
Translate scheduler/sched-nice-design.rst into Chinese.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20220312072642.23118-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
All other scheduler documents have been converted to *.rst. Let's do
the same for schedutil.txt.
Also fixed some typos.
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Link: https://lore.kernel.org/r/20220312070751.16844-1-tangyizhou@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This serves two purposes:
- We now have the last cacheline mostly unused for generic workloads,
instead of having to pull in the poll refs explicitly for workloads
that rely on poll arming.
- It shrinks the io_kiocb from 232 to 224 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull crypto fix from Herbert Xu:
"This fixes a bug where qcom-rng can return a buffer that is not
completely filled with random data"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qcom-rng - ensure buffer for generate is completely filled
This reverts commit 869f0ec048. That
updated the expected device tree binding format for the ls-extirq
driver, without also updating the parsing code (ls_extirq_parse_map)
to the new format.
The context is that the ls-extirq driver uses the standard
"interrupt-map" OF property in a non-standard way, as suggested by
Rob Herring during review:
https://lore.kernel.org/lkml/20190927161118.GA19333@bogus/
This has turned out to be problematic, as Marc Zyngier discovered
through commit 0412841812 ("of/irq: Allow matching of an interrupt-map
local to an interrupt controller"), later fixed through commit
de4adddcbc ("of/irq: Add a quirk for controllers with their own
definition of interrupt-map"). Marc's position, expressed on multiple
opportunities, is that:
(a) [ making private use of the reserved "interrupt-map" name in a
driver ] "is wrong, by the very letter of what an interrupt-map
means. If the interrupt map points to an interrupt controller,
that's the target for the interrupt."
https://lore.kernel.org/lkml/87k0g8jlmg.wl-maz@kernel.org/
(b) [ updating the driver's bindings to accept a non-reserved name for
this property, as an alternative, is ] "is totally pointless. These
machines have been in the wild for years, and existing DTs will be
there *forever*."
https://lore.kernel.org/lkml/87ilvrk1r0.wl-maz@kernel.org/
Considering the above, the Linux kernel has quirks in place to deal with
the ls-extirq's non-standard use of the "interrupt-map". These quirks
may be needed in other operating systems that consume this device tree,
yet this is seen as the only viable solution.
Therefore, the premise of the patch being reverted here is invalid.
It doesn't matter whether the driver, in its non-standard use of the
property, complies to the standard format or not, since this property
isn't expected to be used for interrupt translation by the core.
This change restores LS1088A, LS2088A/LS2085A and LX2160A to their
previous bindings, which allows these systems to continue to use
external interrupt lines with the correct polarity.
Fixes: 869f0ec048 ("arm64: dts: freescale: Fix 'interrupt-map' parent address cells")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the firmware with OS supported policies mask, so that firmware can
relinquish its internal controls. Without this update several Tiger Lake
laptops gets performance limited with in few seconds of executing in
turbo region.
The existing way of enumerating firmware policies via IDSP method and
selecting policy by directly writing those policy UUIDS via _OSC method
is not supported in newer generation of hardware.
There is a new UUID "B23BA85D-C8B7-3542-88DE-8DE2FFCFD698" is defined for
updating policy capabilities. As part of ACPI _OSC method:
Arg0 - UUID: B23BA85D-C8B7-3542-88DE-8DE2FFCFD698
Arg1 - Rev ID: 1
Arg2 - Count: 2
Arg3 - Capability buffers: Array of Arg2 DWORDS
DWORD1: As defined in the ACPI 5.0 Specification
- Bit 0: Query Flag
- Bits 1-3: Always 0
- Bits 4-31: Reserved
DWORD2 and beyond:
- Bit0: set to 1 to indicate Intel(R) Dynamic Tuning is active, 0 to
indicate it is disabled and legacy thermal mechanism should
be enabled.
- Bit1: set to 1 to indicate Intel(R) Dynamic Tuning is controlling
active cooling, 0 to indicate bios shall enable legacy thermal
zone with active trip point.
- Bit2: set to 1 to indicate Intel(R) Dynamic Tuning is controlling
passive cooling, 0 to indicate bios shall enable legacy thermal
zone with passive trip point.
- Bit3: set to 1 to indicate Intel(R) Dynamic Tuning is handling
critical trip point, 0 to indicate bios shall enable legacy
thermal zone with critical trip point.
- Bits 4:31: Reserved
From sysfs interface, there is an existing interface to update policy
UUID using attribute "current_uuid". User space can write the same UUID
for ACTIVE, PASSIVE and CRITICAL policy. Driver converts these UUIDs to
DWORD2 Bit 1 to Bit 3. When any of the policy is activated by user
space it is assumed that dynamic tuning is active.
For example
$cd /sys/bus/platform/devices/INTC1040:00/uuids
To support active policy
$echo "3A95C389-E4B8-4629-A526-C52C88626BAE" > current_uuid
To support passive policy
$echo "42A441D6-AE6A-462b-A84B-4A8CE79027D3" > current_uuid
To support critical policy
$echo "97C68AE7-15FA-499c-B8C9-5DA81D606E0A" > current_uuid
To check all the supported policies
$cat current_uuid
3A95C389-E4B8-4629-A526-C52C88626BAE
42A441D6-AE6A-462b-A84B-4A8CE79027D3
97C68AE7-15FA-499c-B8C9-5DA81D606E0A
To match the bit format for DWORD2, rearranged enum int3400_thermal_uuid
and int3400_thermal_uuids[] by swapping current INT3400_THERMAL_ACTIVE
and INT3400_THERMAL_PASSIVE_1.
If the policies are enumerated via IDSP method then legacy method is
used, if not the new method is used to update policy support.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-16
1) Fix a kernel-info-leak in pfkey.
From Haimin Zhang.
2) Fix an incorrect check of the return value of ipv6_skip_exthdr.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp6: fix check on ipv6_skip_exthdr's return value
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
====================
Link: https://lore.kernel.org/r/20220316121142.3142336-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of policies are 10, so can't be supported by the bitmap size
of u8.
Even though there are no platfoms with these many policies, but
for correctness increase to u32.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 16fc8eca19 ("thermal/int340x_thermal: Add additional UUIDs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Document Intel Dynamic Platform and Thermal Framework (DPTF)
ABI.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI specification says that OSPM should refuse to restore from
hibernate if the hardware signature changes, and should boot from
scratch. However, real BIOSes often vary the hardware signature in cases
where we *do* want to resume from hibernate, so Linux doesn't follow the
spec by default.
However, in a virtual environment there's no reason for the VMM to vary
the hardware signature *unless* it wants to trigger a clean reboot as
defined by the ACPI spec. So enable the check by default if a hypervisor
is detected.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For some specific platforms (E.g. AlderLake) the balance performance
EPP is updated from the hard coded value in the driver. This acts as
the default and balance_performance EPP. The purpose of this EPP
update is to reach maximum 1 core turbo frequency (when possible) out
of the box.
Although we can achieve the objective by using hard coded value in the
driver, there can be other EPP which can be better in terms of power.
But that will be very subjective based on platform and use cases.
This is not practical to have a per platform specific default hard coded
in the driver.
If a platform wants to specify default EPP, it can be set in the firmware.
If this EPP is not the chipset default of 0x80 (balance_perf_epp unless
driver changed it) and more performance oriented but not 0, the driver
can use this as the default and balanced_perf EPP. In this case no driver
update is required every time there is some new platform and default EPP.
If the firmware didn't update the EPP from the chipset default then
the hard coded value is used as per existing implementation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmIx36ARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZszqwf/YvublHqEyUMmM/Bcp6AI4VLRP+XiFML1
7XTQANW1olXy3rN+JiVIl26J/SbwmW0X5l9oB+hfamOU/dSRoppTvVtgrTmYit3l
jIKarcSrAkv9RWfPTXzhihor5V4ZuSHbSA7JS3gw03GOPxsarKrxRHOQ0UizrKi9
MK4vODkrwZFHAScnWFQc8h5tOuki9tqpQ7ELCd4nVVj8r8ZPa0UtToXnaa05X65/
czs7CnIgo4D6TJrA2hQB4nXuVmzMTrZMBNYonrSsARhlp4cpnJgavU1GThPLeFmh
nr+xCTI0Uv55J30A7zSVMUVI/OzT1PVgc60Dl5ZbB5cHNfkcH9weaw==
=3CtG
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.17
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
* tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "ath10k: drop beacon and probe response which leak from other channel"
====================
Link: https://lore.kernel.org/r/20220316130249.B5225C340EC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This converts the remaining inode lookup part by using metabuf in a
straight-forward way. Except that it doesn't use kmap_atomic()
anymore since we now have to maintain two metabufs together.
After this patch, all uncompressed paths are handled with metabuf
instead of page structure.
Link: https://lore.kernel.org/r/20220316012246.95131-2-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, directory inodes are directly handled with page cache
interfaces.
In order to support sub-page directory blocks and folios, let's
convert them into the latest metabuf infrastructure as well and
this patch addresses the readdir case first.
Link: https://lore.kernel.org/r/20220316012246.95131-1-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Syzkaller hit 'WARNING: kobject bug in erofs_unregister_sysfs'. This bug
is triggered by injecting fault in kobject_init_and_add of
erofs_unregister_sysfs.
Fix this by adding sanity check for kobject in erofs_unregister_sysfs
Note that I've tested the patch and the crash does not occur any more.
Link: https://lore.kernel.org/r/20220315132814.12332-1-dzm91@hust.edu.cn
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Fixes: 168e9a7620 ("erofs: add sysfs interface")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Avoid the unnecessary tail recursion since it can be converted into
a loop directly in order to prevent potential stack overflow.
It's a pretty straightforward conversion.
Link: https://lore.kernel.org/r/20220310182743.102365-1-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Start warning about exposing a namespace as multiple block devices,
and set a fixed deprecation release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The Innolux G070Y2-L01 supports two modes of operation:
1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6
2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8
Currently the panel description mixes both, BPP from 1) and bus
format from 2), which triggers a warning at panel-simple.c:615.
Pick the later, set bpp=8, fix the warning.
Fixes: a5d2ade627 ("drm/panel: simple: Add support for Innolux G070Y2-L01")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc4 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.
Fixes: fe141cedc4 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Make the tracing formatting for user_data and flags consistent.
Having consistent formatting allows one for example to grep for a specific
user_data/flags and be able to trace a single sqe through easily.
Change user_data to 0x%llx and flags to 0x%x everywhere. The '0x' is
useful to disambiguate for example "user_data 100".
Additionally remove the '=' for flags in io_uring_req_failed, again for consistency.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220316095204.2191498-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- last minute revert of a nvmet feature added in Linux 5.16
(Hannes Reinecke)
-----BEGIN PGP SIGNATURE-----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=WMr7
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.17-2022-03-16' of git://git.infradead.org/nvme into block-5.17
Pull NVMe fix from Christoph:
"nvme fix for Linux 5.17
- last minute revert of a nvmet feature added in Linux 5.16
(Hannes Reinecke)"
* tag 'nvme-5.17-2022-03-16' of git://git.infradead.org/nvme:
nvmet: revert "nvmet: make discovery NQN configurable"
This reverts commit 3bf2537ec2.
I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.
There was a conflict due to cfg80211 API changes but that was easy to fix.
Fixes: 3bf2537ec2 ("ath10k: drop beacon and probe response which leak from other channel")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220315155455.20446-1-kvalo@kernel.org
Revert commit e38f9ff63e ("ACPI: scan: Do not add device IDs from _CID
if _HID is not valid"), because it has introduced regressions on
multiple systems, even though it only has effect on clearly invalid
firmware.
Reported-by: Pierre-Louis Bossart <notifications@github.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
