Since groups 0 and 63 are invalid, we should check for those bits.
Note that the 802.11 spec specifies the *bit* order, but the CPU
doesn't care about bit order since it can't address bits, so it's
always treating BIT(0) as the lowest bit within a byte.
Reported-by: Jan Fuchs <jan.fuchs@lancom.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If ieee80211_hw_restart() is called during authentication, the
authentication process will continue, causing the driver to be called
in a wrong state. This ultimately causes an oops in the iwlwifi
driver (at least).
This fixes bugzilla 195299 partly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Upon NETDEV_DOWN event, all xfrm_state objects which are bound to
the device are flushed.
The condition for this is wrong, though, testing dev->hw_features
instead of dev->features. If a device has non-user-modifiable
NETIF_F_HW_ESP, then its xfrm_state objects are not flushed,
causing a crash later on after the device is deleted.
Check dev->features instead of dev->hw_features.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The sadb_x_sec_len is stored in the unit 'byte divided by eight'.
So we have to multiply this value by eight before we can do
size checks. Otherwise we may get a slab-out-of-bounds when
we memcpy the user sec_ctx.
Fixes: df71837d50 ("[LSM-IPSec]: Security association restriction.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull namespace updates from Eric Biederman:
"This is a set of small fixes that were mostly stumbled over during
more significant development. This proc fix and the fix to
posix-timers are the most significant of the lot.
There is a lot of good development going on but unfortunately it
didn't quite make the merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Fix unbalanced hard link numbers
signal: Make kill_proc_info static
rlimit: Properly call security_task_setrlimit
signal: Remove unused definition of sig_user_definied
ia64: Remove unused IA64_TASK_SIGHAND_OFFSET and IA64_SIGHAND_SIGLOCK_OFFSET
ipc: Remove unused declaration of recompute_msgmni
posix-timers: Correct sanity check in posix_cpu_nsleep
sysctl: Remove dead register_sysctl_root
Whole point of randomization was to hide server uptime, but an attacker
can simply start a syn flood and TCP generates 'old style' timestamps,
directly revealing server jiffies value.
Also, TSval sent by the server to a particular remote address vary
depending on syncookies being sent or not, potentially triggering PAWS
drops for innocent clients.
Lets implement proper randomization, including for SYNcookies.
Also we do not need to export sysctl_tcp_timestamps, since it is not
used from a module.
In v2, I added Florian feedback and contribution, adding tsoff to
tcp_get_cookie_sock().
v3 removed one unused variable in tcp_v4_connect() as Florian spotted.
Fixes: 95a22caee3 ("tcp: randomize tcp timestamp offsets for each connection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Tested-by: Florian Westphal <fw@strlen.de>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The attribute sizes for IFLA_BRPORT_MCAST_FLOOD and
IFLA_BRPORT_BCAST_FLOOD weren't accounted for in br_port_info_size()
when they were added. Do so now and also add the corresponding policy
entries:
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Mike Manning <mmanning@brocade.com>
Fixes: b6cb5ac833 ("net: bridge: add per-port multicast flood flag")
Fixes: 99f906e9ad ("bridge: add per-port broadcast flood flag")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) The wireless rate info fix from Johannes Berg.
2) When a RAW socket is in hdrincl mode, we need to make sure that the
user provided at least a minimally sized ipv4/ipv6 header. Fix from
Alexander Potapenko.
3) We must emit IFLA_PHYS_PORT_NAME netlink attributes using
nla_put_string() so that it is NULL terminated.
4) Fix a bug in TCP fastopen handling, wherein child sockets
erroneously inherit the fastopen_req from the parent, and later can
end up derefencing freed memory or doing a double free. From Eric
Dumazet.
5) Don't clear out netdev stats at close time in tg3 driver, from
YueHaibing.
6) Fix refcount leak in xt_CT, from Gao Feng.
7) In nft_set_bitmap() don't leak dummy elements, from Liping Zhang.
8) Fix deadlock due to taking the expectation lock twice, also from
Liping Zhang.
9) Make xt_socket work again with ipv6, from Peter Tirsek.
10) Don't allow IPV6 to be used with IPVS if ipv6.disable=1, from Paolo
Abeni.
11) Make the BPF loader more flexible wrt. changes to the bpf MAP entry
layout. From Jesper Dangaard Brouer.
12) Fix ethtool reported device name in aquantia driver, from Pavel
Belous.
13) Fix build failures due to the compile time size test not working in
netfilter conntrack. From Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cfg80211: make RATE_INFO_BW_20 the default
ipv6: initialize route null entry in addrconf_init()
qede: Fix possible misconfiguration of advertised autoneg value.
qed: Fix overriding of supported autoneg value.
qed*: Fix possible overflow for status block id field.
rtnetlink: NUL-terminate IFLA_PHYS_PORT_NAME string
netvsc: make sure napi enabled before vmbus_open
aquantia: Fix driver name reported by ethtool
ipv4, ipv6: ensure raw socket message is big enough to hold an IP header
net/sched: remove redundant null check on head
tcp: do not inherit fastopen_req from parent
forcedeth: remove unnecessary carrier status check
ibmvnic: Move queue restarting in ibmvnic_tx_complete
ibmvnic: Record SKB RX queue during poll
ibmvnic: Continue skb processing after skb completion error
ibmvnic: Check for driver reset first in ibmvnic_xmit
ibmvnic: Wait for any pending scrqs entries at driver close
ibmvnic: Clean up tx pools when closing
ibmvnic: Whitespace correction in release_rx_pools
ibmvnic: Delete napi's when releasing driver resources
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJZChTBAAoJELDendYovxMvkXEIAJDpK5UKMsL1Ihgc0DL0OujQ
UGxLfWJueSA1X7i8BgL/8vfgKxSEB9SUiM+ooHOKXS6oDhyk2RP4MuCe5+lhUbbv
ZMK5KxHMlVUOD9EjYif8DhhiwRowBbWYEwr8XgY12s0Ya0a9TQLVC+noGsuzqNiH
1UyzeeWlBae4nulUMMim6urPNq5AEPVeQKNX3S8rlnDp74IKVZuoISMM62b2KRSr
+R8FVBshXR/HO53YNY0+AfmmUa8T1+dyjL50Eo/QnsG0i+3igOqNrzSKSc6T+nBt
Zl3KDUE5W3/OlxuR+CIdZZ1KKtjzoAiR3cvVlHs2z7MIio87bJcYJforAqe6Evo=
=k6in
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen fixes and featrues for 4.12. The main changes are:
- enable building the kernel with Xen support but without enabling
paravirtualized mode (Vitaly Kuznetsov)
- add a new 9pfs xen frontend driver (Stefano Stabellini)
- simplify Xen's cpuid handling by making use of cpu capabilities
(Juergen Gross)
- add/modify some headers for new Xen paravirtualized devices
(Oleksandr Andrushchenko)
- EFI reset_system support under Xen (Julien Grall)
- and the usual cleanups and corrections"
* tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits)
xen: Move xen_have_vector_callback definition to enlighten.c
xen: Implement EFI reset_system callback
arm/xen: Consolidate calls to shutdown hypercall in a single helper
xen: Export xen_reboot
xen/x86: Call xen_smp_intr_init_pv() on BSP
xen: Revert commits da72ff5bfc and 72a9b18629
xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams()
xen/scsifront: use offset_in_page() macro
xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND
x86/cpu: remove hypervisor specific set_cpu_features
vmware: set cpu capabilities during platform initialization
x86/xen: use capabilities instead of fake cpuid values for xsave
x86/xen: use capabilities instead of fake cpuid values for x2apic
x86/xen: use capabilities instead of fake cpuid values for mwait
x86/xen: use capabilities instead of fake cpuid values for acpi
x86/xen: use capabilities instead of fake cpuid values for acc
x86/xen: use capabilities instead of fake cpuid values for mtrr
x86/xen: use capabilities instead of fake cpuid values for aperf
...
Andrey reported a crash on init_net.ipv6.ip6_null_entry->rt6i_idev
since it is always NULL.
This is clearly wrong, we have code to initialize it to loopback_dev,
unfortunately the order is still not correct.
loopback_dev is registered very early during boot, we lose a chance
to re-initialize it in notifier. addrconf_init() is called after
ip6_route_init(), which means we have no chance to correct it.
Fix it by moving this initialization explicitly after
ipv6_add_dev(init_net.loopback_dev) in addrconf_init().
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IFLA_PHYS_PORT_NAME is a string attribute, so terminate it with \0.
Otherwise libnl3 fails to validate netlink messages with this attribute.
"ip -detail a" assumes too that the attribute is NUL-terminated when
printing it. It often was, due to padding.
I noticed this as libvirtd failing to start on a system with sfc driver
after upgrading it to Linux 4.11, i.e. when sfc added support for
phys_port_name.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
head is previously null checked and so the 2nd null check on head
is redundant and therefore can be removed.
Detected by CoverityScan, CID#1399505 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we no longer release the lock before potentially raising BLACKLISTED
in rbd_reregister_watch(), the "either locked or blacklisted" assert in
rbd_queue_workfn() needs to go: we can be both locked and blacklisted
at that point now.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Cephfs can get cap update requests that contain a new epoch barrier in
them. When that happens we want to pause all OSD traffic until the right
map epoch arrives.
Add an epoch_barrier field to ceph_osd_client that is protected by the
osdc->lock rwsem. When the barrier is set, and the current OSD map
epoch is below that, pause the request target when submitting the
request or when revisiting it. Add a way for upper layers (cephfs)
to update the epoch_barrier as well.
If we get a new map, compare the new epoch against the barrier before
kicking requests and request another map if the map epoch is still lower
than the one we want.
If we get a map with a full pool, or at quota condition, then set the
barrier to the current epoch value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When a Ceph volume hits capacity, a flag is set in the OSD map to
indicate that, and a new map is sprayed around the cluster. With cephfs
we want it to shut down any abortable requests that are in progress with
an -ENOSPC error as they'd just hang otherwise.
Add a new ceph_osdc_abort_on_full helper function to handle this. It
will first check whether there is an out-of-space condition in the
cluster and then walk the tree and abort any request that has
r_abort_on_full set with a -ENOSPC error. Call this new function
directly whenever we get a new OSD map.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Usually, when the osd map is flagged as full or the pool is at quota,
write requests just hang. This is not what we want for cephfs, where
it would be better to simply report -ENOSPC back to userland instead
of stalling.
If the caller knows that it will want an immediate error return instead
of blocking on a full or at-quota error condition then allow it to set a
flag to request that behavior.
Set that flag in ceph_osdc_new_request (since ceph.ko is the only caller),
and on any other write request from ceph.ko.
A later patch will deal with requests that were submitted before the new
map showing the full condition came in.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Nothing uses this anymore with the removal of the ack vs. commit code.
Remove the field and just encode zeroes into place in the request
encoding.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add a readonly, exported to sysfs module parameter so that userspace
can generate meaningful error messages. It's a bit funky, but there is
no other libceph-specific place.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
No reason to hide CephFS-specific features in the rbd case. Recent
feature bits mix RADOS and CephFS-specific stuff together anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.
Since xfrm_dst->origin isn't used anywhere following commit
ca116922af ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used
either, so get rid of that too.
Fixes: 9d6ec93801 ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Locally generated TCP packets are usually cloned, so we
do skb_cow_data() on this packets. After that we need to
reload the pointer to the esp header. On udpencap this
header has an offset to skb_transport_header, so take this
offset into account.
Fixes: 67d349ed60 ("net/esp4: Fix invalid esph pointer crash")
Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Reported-by: Don Bowman <db@donbowman.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches
-----BEGIN PGP SIGNATURE-----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=pgEL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"More exchaustive description of primary updates in this release:
- Lots of driver fixes and misc fixes across the board.
- I had to base on a net-next tree because the IPoIB Accelorator
patches needed it.
Unfortunately, it was known to Mellanox that there would need to be
an IPoIB accelorator patch to the net tree (which left some
functions turned off by an #ifdef construct to avoid warnings about
defined but unused functions), then one to the RDMA tree, then a
fixup that went back and re-enabled the functions in the net tree
and enabled their use in the rdma tree
Also, a sparse fix was sent to the net tree after I did my pull,
and the fixup patch conflicts quite directly with that sparse fix,
so I'm going to submit the fixup patch towards the end of the merge
window by itself and based upon your master branch at the time.
- Two separate rounds of hfi1 fixes, one that got dropped from last
release because it came in just a day or two before the end of the
merge window and then the one from this release cycle.
Of note is that I now have a third series that just landed from
Intel yesterday. It is not included in this pull request, but I may
submit it by the end of the week. I'll talk to Intel about
improving the timing of thier submissions for my workflow.
- Changes to our idr usage in the RDMA subsystem that will tie into
our cgroup management and also into the upcoming changes for the
RDMA kernel<->userspace API.
- Addition of support for a netdev to be tied to an RDMA device at
the core level
- Addition of the VNIC driver from Intel.
While IPoIB provides IP over InfiniBand (and *only* IP, no lower
layer protocol headers are allowed or supported), the VNIC driver
presents a virtual Ethernet device with support for things like
varying Ethertypes, VLANs, priorities and other features of
Ethernet.
The virtual devices are centrally managed by the OPA fabric
manager, making this (for the time being) a strictly OPA specific
feature.
- Improvements to the On-Demand Paging support in the RDMA subsystem.
- Addition of three significant OPA changes.
While we added OPA support some time ago (via the hfi1 driver), the
RDMA subsystem has so far glossed over the areas where OPA and
InfiniBand differ.
With this release we are starting to add support for the OPA
extensions into the RDMA core in the following area: Extended port
information for OPA is now supported, extended Address Handle
attributes for OPA are now supported, and extended SA Queries to
get OPA specific subnet information is now supported.
Concise summary from the tag:
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (191 commits)
infiniband: avoid dereferencing uninitialized dst on error path
IB/SA: Add OPA addr header
IB/mlx5: Add port_xmit_wait to counter registers read
IB/ocrdma: fix out of bounds access to local buffer
IB/mlx4: Fix incorrect order of formal and actual parameters
IB/mlx4: Change flush logic so it adheres to the variable name
mlx5: Fix mlx5_ib_map_mr_sg mr length
IB/rxe: Don't clamp residual length to mtu
IB/SA: Add support to query OPA path records
IB/SA: Add OPA path record type
IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields
IB/SA: Introduce path record specific types
IB/SA: Rename ib_sa_path_rec to sa_path_rec
IB/CM: Add braces when using sizeof
IB/core: Define 'opa' rdma_ah_attr type
IB/core: Define 'ib' and 'roce' rdma_ah_attr types
IB/core: Use rdma_ah_attr accessor functions
IB/core: Add accessor functions for rdma_ah_attr fields
IB/PVRDMA: Rename ib_ah_attr related functions
IB/mthca: Rename to_ib_ah_attr to to_rdma_ah_attr
...
Pull audit updates from Paul Moore:
"Fourteen audit patches for v4.12 that span the full range of fixes,
new features, and internal cleanups.
We have a patches to move to 64-bit timestamps, convert refcounts from
atomic_t to refcount_t, track PIDs using the pid struct instead of
pid_t, convert our own private audit buffer cache to a standard
kmem_cache, log kernel module names when they are unloaded, and
normalize the NETFILTER_PKT to make the userspace folks happier.
From a fixes perspective, the most important is likely the auditd
connection tracking RCU fix; it was a rather brain dead bug that I'll
take the blame for, but thankfully it didn't seem to affect many
people (only one report).
I think the patch subject lines and commit descriptions do a pretty
good job of explaining the details and why the changes are important
so I'll point you there instead of duplicating it here; as usual, if
you have any questions you know where to find us.
We also manage to take out more code than we put in this time, that
always makes me happy :)"
* 'stable-4.12' of git://git.infradead.org/users/pcmoore/audit:
audit: fix the RCU locking for the auditd_connection structure
audit: use kmem_cache to manage the audit_buffer cache
audit: Use timespec64 to represent audit timestamps
audit: store the auditd PID as a pid struct instead of pid_t
audit: kernel generated netlink traffic should have a portid of 0
audit: combine audit_receive() and audit_receive_skb()
audit: convert audit_watch.count from atomic_t to refcount_t
audit: convert audit_tree.count from atomic_t to refcount_t
audit: normalize NETFILTER_PKT
netfilter: use consistent ipv4 network offset in xt_AUDIT
audit: log module name on delete_module
audit: remove unnecessary semicolon in audit_watch_handle_event()
audit: remove unnecessary semicolon in audit_mark_handle_event()
audit: remove unnecessary semicolon in audit_field_valid()
Pablo Neira Ayuso says:
====================
Netfilter/IPVS/OVS fixes for net
The following patchset contains a rather large batch of Netfilter, IPVS
and OVS fixes for your net tree. This includes fixes for ctnetlink, the
userspace conntrack helper infrastructure, conntrack OVS support,
ebtables DNAT target, several leaks in error path among other. More
specifically, they are:
1) Fix reference count leak in the CT target error path, from Gao Feng.
2) Remove conntrack entry clashing with a matching expectation, patch
from Jarno Rajahalme.
3) Fix bogus EEXIST when registering two different userspace helpers,
from Liping Zhang.
4) Don't leak dummy elements in the new bitmap set type in nf_tables,
from Liping Zhang.
5) Get rid of module autoload from conntrack update path in ctnetlink,
we don't need autoload at this late stage and it is happening with
rcu read lock held which is not good. From Liping Zhang.
6) Fix deadlock due to double-acquire of the expect_lock from conntrack
update path, this fixes a bug that was introduced when the central
spinlock got removed. Again from Liping Zhang.
7) Safe ct->status update from ctnetlink path, from Liping. The expect_lock
protection that was selected when the central spinlock was removed was
not really protecting anything at all.
8) Protect sequence adjustment under ct->lock.
9) Missing socket match with IPv6, from Peter Tirsek.
10) Adjust skb->pkt_type of DNAT'ed frames from ebtables, from
Linus Luessing.
11) Don't give up on evaluating the expression on new entries added via
dynset expression in nf_tables, from Liping Zhang.
12) Use skb_checksum() when mangling icmpv6 in IPv6 NAT as this deals
with non-linear skbuffs.
13) Don't allow IPv6 service in IPVS if no IPv6 support is available,
from Paolo Abeni.
14) Missing mutex release in error path of xt_find_table_lock(), from
Dan Carpenter.
15) Update maintainers files, Netfilter section. Add Florian to the
file, refer to nftables.org and change project status from Supported
to Maintained.
16) Bail out on mismatching extensions in element updates in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If gcc (e.g. 4.1.2) decides not to inline total_extension_size(), the
build will fail with:
net/built-in.o: In function `nf_conntrack_init_start':
(.text+0x9baf6): undefined reference to `__compiletime_assert_1893'
or
ERROR: "__compiletime_assert_1893" [net/netfilter/nf_conntrack.ko] undefined!
Fix this by forcing inlining of total_extension_size().
Fixes: b3a5db109e ("netfilter: conntrack: use u8 for extension sizes again")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey reported a warning triggered by the rcu code:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289
debug_print_object+0x175/0x210
ODEBUG: activate active (active state 1) object type: rcu_head hint:
(null)
Modules linked in:
CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x192/0x22d lib/dump_stack.c:52
__warn+0x19f/0x1e0 kernel/panic.c:549
warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564
debug_print_object+0x175/0x210 lib/debugobjects.c:286
debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442
debug_rcu_head_queue kernel/rcu/rcu.h:75
__call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229
call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288
rt6_rcu_free net/ipv6/ip6_fib.c:158
rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188
fib6_del_route net/ipv6/ip6_fib.c:1461
fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500
__ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174
ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187
__ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520
addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672
...
Andrey's reproducer program runs in a very tight loop, calling
'unshare -n' and then spawning 2 sets of 14 threads running random ioctl
calls. The relevant networking sequence:
1. New network namespace created via unshare -n
- ip6tnl0 device is created in down state
2. address added to ip6tnl0
- equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1
- DAD is started on the address and when it completes the host
route is inserted into the FIB
3. ip6tnl0 is brought up
- the new fixup_permanent_addr function restarts DAD on the address
4. exit namespace
- teardown / cleanup sequence starts
- once in a blue moon, lo teardown appears to happen BEFORE teardown
of ip6tunl0
+ down on 'lo' removes the host route from the FIB since the dst->dev
for the route is loobback
+ host route added to rcu callback list
* rcu callback has not run yet, so rt is NOT on the gc list so it has
NOT been marked obsolete
5. in parallel to 4. worker_thread runs addrconf_dad_completed
- DAD on the address on ip6tnl0 completes
- calls ipv6_ifa_notify which inserts the host route
All of that happens very quickly. The result is that a host route that
has been deleted from the IPv6 FIB and added to the RCU list is re-inserted
into the FIB.
The exit namespace eventually gets to cleaning up ip6tnl0 which removes the
host route from the FIB again, calls the rcu function for cleanup -- and
triggers the double rcu trace.
The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably,
DAD should not be started in step 2. The interface is in the down state,
so it can not really send out requests for the address which makes starting
DAD pointless.
Since the second DAD was introduced by a recent change, seems appropriate
to use it for the Fixes tag and have the fixup function only start DAD for
addresses in the PREDAD state which occurs in addrconf_ifdown if the
address is retained.
Big thanks to Andrey for isolating a reliable reproducer for this problem.
Fixes: f1705ec197 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If no NLM_F_EXCL is set and the element already exists in the set, make
sure that both elements have the same extensions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
We are going to add more parameters to find_vqs, let's wrap the call so
we don't need to tweak all drivers every time.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We try to make this function more readable by improving variable names
and comments, using more stack variables, and doing some smaller changes
to the logics. We also rename the function to make it consistent with
naming conventions used elsewhere in the code.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try to make this function more readable by improving variable names
and comments, plus some minor changes to the logics.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should call ipxitf_put() if the copy_to_user() fails.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jump is now the only one using value action opcode. This is going to
change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP.
This also fixes the TC_ACT_JUMP check, which is incorrectly done as a
bit check, not a value check.
Fixes: e0ee84ded7 ("net sched actions: Complete the JUMPX opcode")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be careful when comparing tcp_time_stamp to some u32 quantity,
otherwise result can be surprising.
Fixes: 7c106d7e78 ("[TCP]: TCP Low Priority congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull splice updates from Al Viro:
"These actually missed the last cycle; the branch itself is from last
December"
* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make nr_pages calculation in default_file_splice_read() a bit less ugly
splice/tee/vmsplice: validate flags
splice_pipe_desc: kill ->flags
remove spd_release_page()
Pull iov_iter updates from Al Viro:
"Cleanups that sat in -next + -stable fodder that has just missed 4.11.
There's more iov_iter work in my local tree, but I'd prefer to push
the stuff that had been in -next first"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: don't revert iov buffer if csum error
generic_file_read_iter(): make use of iov_iter_revert()
generic_file_direct_write(): make use of iov_iter_revert()
orangefs: use iov_iter_revert()
sctp: switch to copy_from_iter_full()
net/9p: switch to copy_from_iter_full()
switch memcpy_from_msg() to copy_from_iter_full()
rds: make use of iov_iter_revert()
Make sure we apply NET_IP_ALIGN when reserving headroom for SKB
and XDP test runs, just like a real driver would.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Instead, pass the kattr in which has a kernel side copy of this
data structure from userspace already.
Fix based upon a suggestion from Alexei Starovoitov.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Eliminate flipping in and out of message fields, dropping fields in the
process.
Sample raw message format IPv4 UDP:
type=NETFILTER_PKT msg=audit(1487874761.386:228): mark=0xae8a2732 saddr=127.0.0.1 daddr=127.0.0.1 proto=17^]
Sample raw message format IPv6 ICMP6:
type=NETFILTER_PKT msg=audit(1487874761.381:227): mark=0x223894b7 saddr=::1 daddr=::1 proto=58^]
Issue: https://github.com/linux-audit/audit-kernel/issues/11
Test case: https://github.com/linux-audit/audit-testsuite/issues/43
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Even though the skb->data pointer has been moved from the link layer
header to the network layer header, use the same method to calculate the
offset in ipv4 and ipv6 routines.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: munged subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix kdoc parameter spelling from extact to extack.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All Xen frontends need to select this symbol to avoid a link error:
net/built-in.o: In function `p9_trans_xen_init':
:(.text+0x149e9c): undefined reference to `__xenbus_register_frontend'
Fixes: d4b40a02f837 ("xen/9pfs: build 9pfs Xen transport driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
In order to use "len" to check for xenbus_read errors properly, we need
to initialize len to 0 before passing it to xenbus_read.
CC: dan.carpenter@oracle.com
CC: jgross@suse.com
CC: boris.ostrovsky@oracle.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
This patch adds a Kconfig option and Makefile support for building the
9pfs Xen driver.
CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Upon receiving a notification from the backend, schedule the
p9_xen_response work_struct. p9_xen_response checks if any responses are
available, if so, it reads them one by one, calling p9_client_cb to send
them up to the 9p layer (p9_client_cb completes the request). Handle the
ring following the Xen 9pfs specification.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Implement struct p9_trans_module create and close functions by looking
at the available Xen 9pfs frontend-backend connections. We don't expect
many frontend-backend connections, thus walking a list is OK.
Send requests to the backend by copying each request to one of the
available rings (each frontend-backend connection comes with multiple
rings). Handle the ring and notifications following the 9pfs
specification. If there are not enough free bytes on the ring for the
request, wait on the wait_queue: the backend will send a notification
after consuming more requests.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Implement functions to handle the xenbus handshake. Upon connection,
allocate the rings according to the protocol specification.
Initialize a work_struct and a wait_queue. The work_struct will be used
to schedule work upon receiving an event channel notification from the
backend. The wait_queue will be used to wait when the ring is full and
we need to send a new request.
CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Introduce the Xen 9pfs transport driver: add struct xenbus_driver to
register as a xenbus driver and add struct p9_trans_module to register
as v9fs driver.
All functions are empty stubs for now.
CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull uaccess unification updates from Al Viro:
"This is the uaccess unification pile. It's _not_ the end of uaccess
work, but the next batch of that will go into the next cycle. This one
mostly takes copy_from_user() and friends out of arch/* and gets the
zero-padding behaviour in sync for all architectures.
Dealing with the nocache/writethrough mess is for the next cycle;
fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
sold on access_ok() in there, BTW; just not in this pile), same for
reducing __copy_... callsites, strn*... stuff, etc. - there will be a
pile about as large as this one in the next merge window.
This one sat in -next for weeks. -3KLoC"
* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
HAVE_ARCH_HARDENED_USERCOPY is unconditional now
CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
m32r: switch to RAW_COPY_USER
hexagon: switch to RAW_COPY_USER
microblaze: switch to RAW_COPY_USER
get rid of padding, switch to RAW_COPY_USER
ia64: get rid of copy_in_user()
ia64: sanitize __access_ok()
ia64: get rid of 'segment' argument of __do_{get,put}_user()
ia64: get rid of 'segment' argument of __{get,put}_user_check()
ia64: add extable.h
powerpc: get rid of zeroing, switch to RAW_COPY_USER
esas2r: don't open-code memdup_user()
alpha: fix stack smashing in old_adjtimex(2)
don't open-code kernel_setsockopt()
mips: switch to RAW_COPY_USER
mips: get rid of tail-zeroing in primitives
mips: make copy_from_user() zero tail explicitly
mips: clean and reorder the forest of macros...
mips: consolidate __invoke_... wrappers
...
Since that change also made the nfrag function not necessary
for exports, remove it.
Fixes: 89a23c8b52 ("ip6_tunnel: Fix missing tunnel encapsulation limit option")
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code silently ignores driver errors when configuring
IPSec offload xfrm_state, and falls back to host-based crypto.
Fail the xfrm_state creation if the driver has an error, because
the NIC offloading was explicitly requested by the user program.
This will communicate back to the user that there was an error.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both esp_output and esp_xmit take a pointer to the ESP header
and place it in esp_info struct prior to calling esp_output_head.
Inside esp_output_head, the call to esp_output_udp_encap
makes sure to update the pointer if it gets invalid.
However, if esp_output_head itself calls skb_cow_data, the
pointer is not updated and stays invalid, causing a crash
after esp_output_head returns.
Update the pointer if it becomes invalid in esp_output_head
Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv6 tunneling code tries to insert IPV6_TLV_TNL_ENCAP_LIMIT and
IPV6_TLV_PADN options when an encapsulation limit is defined (the
default is a limit of 4). An MTU adjustment is done to account for
these options as well. However, the options are never present in the
generated packets.
The issue appears to be a subtlety between IPV6_DSTOPTS and
IPV6_RTHDRDSTOPTS defined in RFC 3542. When the IPIP tunnel driver was
written, the encap limit options were included as IPV6_RTHDRDSTOPTS in
dst0opt of struct ipv6_txoptions. Later, ipv6_push_nfrags_opts was
(correctly) updated to require IPV6_RTHDR options when IPV6_RTHDRDSTOPTS
are to be used. This caused the options to no longer be included in v6
encapsulated packets.
The fix is to use IPV6_DSTOPTS (in dst1opt of struct ipv6_txoptions)
instead. IPV6_DSTOPTS do not have the additional IPV6_RTHDR requirement.
Fixes: 1df64a8569c7: ("[IPV6]: Add ip6ip6 tunnel driver.")
Fixes: 333fad5364: ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542)")
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch 3278682123 (make skb_copy_datagram_msg() et.al. preserve
->msg_iter on error) will revert the iov buffer if copy to iter
failed, but it didn't copy any datagram if the skb_checksum_complete
error, so no need to revert any data at this place.
v2: Sabrina notice that return -EFAULT when checksum error is not correct
here, it would confuse the caller about the return value, so fix it.
Fixes: 3278682123 ("make skb_copy_datagram_msg() et.al. preserve->msg_iter on error")
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-04-30
Here's one last batch of Bluetooth patches in the bluetooth-next tree
targeting the 4.12 kernel.
- Remove custom ECDH implementation and use new KPP API instead
- Add protocol checks to hci_ldisc
- Add module license to HCI UART Nokia H4+ driver
- Minor fix for 32bit user space - 64 bit kernel combination
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
Since several of the the netlink attributes used to configure the flower
classifier's MPLS TC, BOS and Label fields have additional bits which are
unused, check those bits to ensure that they are actually 0 as suggested
by Jamal.
Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com>
Cc: David Miller <davem@davemloft.net>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jakub Kicinski <kubakici@wp.pl>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. A large bunch of code cleanups, simplify the conntrack extension
codebase, get rid of the fake conntrack object, speed up netns by
selective synchronize_net() calls. More specifically, they are:
1) Check for ct->status bit instead of using nfct_nat() from IPVS and
Netfilter codebase, patch from Florian Westphal.
2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao.
3) Simplify FTP IPVS helper module registration path, from Arushi Singhal.
4) Introduce nft_is_base_chain() helper function.
5) Enforce expectation limit from userspace conntrack helper,
from Gao Feng.
6) Add nf_ct_remove_expect() helper function, from Gao Feng.
7) NAT mangle helper function return boolean, from Gao Feng.
8) ctnetlink_alloc_expect() should only work for conntrack with
helpers, from Gao Feng.
9) Add nfnl_msg_type() helper function to nfnetlink to build the
netlink message type.
10) Get rid of unnecessary cast on void, from simran singhal.
11) Use seq_puts()/seq_putc() instead of seq_printf() where possible,
also from simran singhal.
12) Use list_prev_entry() from nf_tables, from simran signhal.
13) Remove unnecessary & on pointer function in the Netfilter and IPVS
code.
14) Remove obsolete comment on set of rules per CPU in ip6_tables,
no longer true. From Arushi Singhal.
15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng.
16) Remove unnecessary nested rcu_read_lock() in
__nf_nat_decode_session(). Code running from hooks are already
guaranteed to run under RCU read side.
17) Remove deadcode in nf_tables_getobj(), from Aaron Conole.
18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(),
also from Aaron.
19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole.
20) Don't propagate NF_DROP error to userspace via ctnetlink in
__nf_nat_alloc_null_binding() function, from Gao Feng.
21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks,
from Gao Feng.
22) Kill the fake untracked conntrack objects, use ctinfo instead to
annotate a conntrack object is untracked, from Florian Westphal.
23) Remove nf_ct_is_untracked(), now obsolete since we have no
conntrack template anymore, from Florian.
24) Add event mask support to nft_ct, also from Florian.
25) Move nf_conn_help structure to
include/net/netfilter/nf_conntrack_helper.h.
26) Add a fixed 32 bytes scratchpad area for conntrack helpers.
Thus, we don't deal with variable conntrack extensions anymore.
Make sure userspace conntrack helper doesn't go over that size.
Remove variable size ct extension infrastructure now this code
got no more clients. From Florian Westphal.
27) Restore offset and length of nf_ct_ext structure to 8 bytes now
that wraparound is not possible any longer, also from Florian.
28) Allow to get rid of unassured flows under stress in conntrack,
this applies to DCCP, SCTP and TCP protocols, from Florian.
29) Shrink size of nf_conntrack_ecache structure, from Florian.
30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker,
from Gao Feng.
31) Register SYNPROXY hooks on demand, from Florian Westphal.
32) Use pernet hook whenever possible, instead of global hook
registration, from Florian Westphal.
33) Pass hook structure to ebt_register_table() to consolidate some
infrastructure code, from Florian Westphal.
34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the
SYNPROXY code, to make sure device stats are not fooled, patch
from Gao Feng.
35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we
don't need anymore if we just select a fixed size instead of
expensive runtime time calculation of this. From Florian.
36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(),
from Florian.
37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from
Florian.
38) Attach NAT extension on-demand from masquerade and pptp helper
path, from Florian.
39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole.
40) Speed up netns by selective calls of synchronize_net(), from
Florian Westphal.
41) Silence stack size warning gcc in 32-bit arch in snmp helper,
from Florian.
42) Inconditionally call nf_ct_ext_destroy(), even if we have no
extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from
Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers usually have a number of restrictions for running XDP
- most common being buffer sizes, LRO and number of rings.
Even though some drivers try to be helpful and print error
messages experience shows that users don't often consult
kernel logs on netlink errors. Try to use the new extended
ack mechanism to carry the message back to user space.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table,
then remove it from the nat_bysource_table via nat_extend->destroy.
But now, the nat extension is attached on demand, so if the nat extension
is not attached, we will not be notified when the ct is destroyed, i.e.
we may fail to remove ct from the nat_bysource_table.
So just keep it simple, even if the extension is not attached, we will
still invoke the related ext->destroy. And this will also preserve the
flexibility for the future extension.
Fixes: 9a08ecfe74 ("netfilter: don't attach a nat extension by default")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
Third Round of IPVS Updates for v4.12
please consider these enhancements to IPVS for v4.12.
If it is too late for v4.12 then please consider them for v4.13.
* Remove unused function
* Correct comparison of unsigned value
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net/ipv4/netfilter/nf_nat_snmp_basic.c:1158:1: warning: the frame size
of 1160 bytes is larger than 1024 bytes
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_unregister_net_hook(s) can avoid a second call to synchronize_net,
provided there is no nfqueue active in that net namespace (which is
the common case).
This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally
this gets called during netns cleanup so no packets should be queued.
For the rare case of base chain being unregistered or module removal
while nfqueue is in use the extra hiccup due to the packet drops isn't
a big deal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_log_unregister() (which is what gets called in the logger backends
module exit paths) does a (required, module is removed) synchronize_rcu().
But nf_log_unset() is only called from pernet exit handlers. It doesn't
free any memory so there appears to be no need to call synchronize_rcu.
v2: Liping Zhang points out that nf_log_unregister() needs to be called
after pernet unregister, else rmmod would become unsafe.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
synchronize_net is expensive and slows down netns cleanup a lot.
We have two APIs to unregister a hook:
nf_unregister_net_hook (which calls synchronize_net())
and
nf_unregister_net_hooks (calls nf_unregister_net_hook in a loop)
Make nf_unregister_net_hook a wapper around new helper
__nf_unregister_net_hook, which unlinks the hook but does not free it.
Then, we can call that helper in nf_unregister_net_hooks and then
call synchronize_net() only once.
Andrey Konovalov reports this change improves syzkaller fuzzing speed at
least twice.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 7e26bf45e4 ("net: bridge: allow SW learn to take over HW fdb
entries") added the ability to "take over an entry which was previously
learned via HW when it shows up from a SW port".
However, if an entry was learned via HW and then a control packet
(e.g., ARP request) was trapped to the CPU, the bridge driver will
update the entry and remove the externally learned flag, although the
entry is still present in HW. Instead, only clear the externally learned
flag in case of roaming.
Fixes: 7e26bf45e4 ("net: bridge: allow SW learn to take over HW fdb entries")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 1215e51eda ("ipv4: fix a deadlock in ip_ra_control")
we always take RTNL lock for ip_ra_control() which is the only place
we update the list ip_ra_chain, so the ip_ra_lock is no longer needed.
As Eric points out, BH does not need to disable either, RCU readers
don't care.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We recently added a check to see if nla_nest_start() fails. There are
two issues with that. First, if it fails then I don't think we should
call nla_nest_cancel(). Second, it's slightly convoluted but the
current code returns success but we should return -EMSGSIZE instead.
Fixes: a50fe0ffd7 ("lwtunnel: check return value of nla_nest_start")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialise init_net.count to 1 for its pointer from init_nsproxy lest
someone tries to do a get_net() and a put_net() in a process in which
current->ns_proxy->net_ns points to the initial network namespace.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE4bay/IylYqM/npjQHv7KIOw4HPYFAlkBofATHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAe/sog7Dgc9qY7CACnNQLrwm8fIV72DD9+pZ1QsNwvLHCr
8ZiHSd7m/VI/FESje4Uc3D9vKi7K6MGX9/lWi70QY+2IPrTfRTrYEO5I4U3+1czc
zQ/NnQGsKBoAJdPLoXp0LkQVAXRSXUoKiaiU0VdktaAzGewixz9YxGHAcCqcu6oM
1+MftSR0iCP4mkcOyVMcnipcI9L8TzEOz2f3XB/RtMiRGcEsUekAHfdpH6NSHbAq
mG5pOwENqNn4i1ZwGg16u3p+U4YfWAF9Y+/wuev6Ob4Kla2tYnuZNEAqf9ZubY93
NBsT3pGjcbzbbihlKvu64NUlGiloQ8AGAYvttinrfx1tnsDgvP2m6nQP
=mHEY
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.12-20170427' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2017-04-25
this is a pull request of 1 patch for net-next/master.
This patch by Oliver Hartkopp fixes the build of the broad cast manager
with CONFIG_PROC_FS disabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
avoid direct access to sk->sk_state when tcp_poll() is called on a socket
using active TCP fastopen with deferred connect. Use local variable
'state', which stores the result of sk_state_load(), like it was done in
commit 00fd38d938 ("tcp: ensure proper barriers in lockless contexts").
Fixes: 19f6d3f3c8 ("net/tcp-fastopen: Add new API support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While testing a fix [1] in ___pskb_trim(), addressing the WARN_ON_ONCE()
in skb_try_coalesce() reported by Andrey, I found that we had an skb
with skb->sk set but no skb->destructor.
This invalidated heuristic found in commit 158f323b98 ("net: adjust
skb->truesize in pskb_expand_head()") and in cited patch.
Considering the BUG_ON(skb->sk) we have in skb_orphan(), we should
restrain the temporary setting to a minimal section.
[1] https://patchwork.ozlabs.org/patch/755570/
net: adjust skb->truesize in ___pskb_trim()
Fixes: 8f917bba00 ("bpf: pass sk to helper functions")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the ECDH key generation takes a different path, it needs to be
tested as well. For this generate the public debug key from the private
debug key and compare both.
This also moves the seeding of the private key into the SMP calling code
to allow for easier re-use of the ECDH key generation helper.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When generating new ECDH keys with kpp, the shared secret input needs to
be set to NULL. Fix this by including kpp_request_set_input call.
Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp
API")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being
defined as 0x80000000. This results in sendmsg failure if used from 32bit
userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT
in flags check in hci_sock_sendmsg.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marko Kiiskila <marko@runtime.io>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Bluetooth would crash when computing ECDH keys with kpp
if VMAP_STACK is enabled. Fix by allocating data passed
to kpp on heap.
Fixes: 58771c1c ("Bluetooth: convert smp and selftest to crypto kpp
API")
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Pull networking fixes from David Miller:
"Just a couple more stragglers, I really hope this is it.
1) Don't let frags slip down into the GRO segmentation handlers, from
Steffen Klassert.
2) Truesize under-estimation triggers warnings in TCP over loopback
with socket filters, 2 part fix from Eric Dumazet.
3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal,
from Paolo Abeni.
4) If we flush the XFRM policy after garbage collection, it doesn't
work because stray entries can be created afterwards. Fix from Xin
Long.
5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan.
6) Fix GRO regression with IPSEC when netfilter is disabled, from
Sabrina Dubroca.
7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: hso: register netdev later to avoid a race condition
net: adjust skb->truesize in ___pskb_trim()
tcp: do not underestimate skb->truesize in tcp_trim_head()
bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal
ipv4: Don't pass IP fragments to upper layer GRO handlers.
cpsw/netcp: refine cpts dependency
tipc: close the connection if protocol messages contain errors
tipc: improve error validations for sockets in CONNECTING state
tipc: Fix missing connection request handling
xfrm: fix GRO for !CONFIG_NETFILTER
xfrm: do the garbage collection after flushing policy
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket.
As we did recently in commit 158f323b98 ("net: adjust skb->truesize in
pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(),
via a call to skb_condense().
If all frags were freed, then skb->truesize can be recomputed.
This call can be done if skb is not yet owned, or destructor is
sock_edemux().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in
skb_try_coalesce() using syzkaller and a filter attached to a TCP
socket over loopback interface.
I believe one issue with looped skbs is that tcp_trim_head() can end up
producing skb with under estimated truesize.
It hardly matters for normal conditions, since packets sent over
loopback are never truncated.
Bytes trimmed from skb->head should not change skb truesize, since
skb->head is not reallocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upper layer GRO handlers can not handle IP fragments, so
exit GRO processing in this case.
This fixes ESP GRO because the packet must be reassembled
before we can decapsulate, otherwise we get authentication
failures.
It also aligns IPv4 to IPv6 where packets with fragmentation
headers are not passed to upper layer GRO handlers.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-04-28
Just one patch to fix a misplaced spin_unlock_bh in an error path.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-04-28
1) Do garbage collecting after a policy flush to remove old
bundles immediately. From Xin Long.
2) Fix GRO if netfilter is not defined.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* API support for concurrent scheduled scan requests
* API changes for roaming reporting
* BSS max idle support in mac80211
* API changes for TX status reporting in mac80211
* API changes for RX rate reporting in mac80211
* rewrite monitor logic to prepare for BPF filters
* bugfix for rare devices without 2.4 GHz support
* a bugfix for recent DFS changes
* some further cleanups
The API changes are actually at a nice time, since it's
typically quiet just before the merge window, and trees
can be synchronized easily during it.
-----BEGIN PGP SIGNATURE-----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=dYTw
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2017-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of patches for -next:
* API support for concurrent scheduled scan requests
* API changes for roaming reporting
* BSS max idle support in mac80211
* API changes for TX status reporting in mac80211
* API changes for RX rate reporting in mac80211
* rewrite monitor logic to prepare for BPF filters
* bugfix for rare devices without 2.4 GHz support
* a bugfix for recent DFS changes
* some further cleanups
The API changes are actually at a nice time, since it's
typically quiet just before the merge window, and trees
can be synchronized easily during it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a socket is shutting down, we notify the peer node about the
connection termination by reusing an incoming message if possible.
If the last received message was a connection acknowledgment
message, we reverse this message and set the error code to
TIPC_ERR_NO_PORT and send it to peer.
In tipc_sk_proto_rcv(), we never check for message errors while
processing the connection acknowledgment or probe messages. Thus
this message performs the usual flow control accounting and leaves
the session hanging.
In this commit, we terminate the connection when we receive such
error messages.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until now, the checks for sockets in CONNECTING state was based on
the assumption that the incoming message was always from the
peer's accepted data socket.
However an application using a non-blocking socket sends an implicit
connect, this socket which is in CONNECTING state can receive error
messages from the peer's listening socket. As we discard these
messages, the application socket hangs as there due to inactivity.
In addition to this, there are other places where we process errors
but do not notify the user.
In this commit, we process such incoming error messages and notify
our users about them using sk_state_change().
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In filter_connect, we use waitqueue_active() to check for any
connections to wakeup. But waitqueue_active() is missing memory
barriers while accessing the critical sections, leading to
inconsistent results.
In this commit, we replace this with an SMP safe wq_has_sleeper()
using the generic socket callback sk_data_ready().
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman says:
====================
IPVS Fixes for v4.11
I would also like it considered for stable.
* Explicitly forbid ipv6 service/dest creation if ipv6 mod is disabled
to avoid oops caused by IPVS accesing IPv6 routing code in such
circumstances.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
According to my static checker we should unlock here before the return.
That seems reasonable to me as well.
Fixes" b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Have proper request id filled in the SCHED_SCAN_RESULTS and
SCHED_SCAN_STOPPED notifications toward user-space by having the
driver provide it through the api.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Parse the BSS max idle period element and set the BSS configuration
accordingly so the driver can use this information to configure the
max idle period and to use protected management frames for keep alive
when required.
The BSS max idle period element is defined in IEEE802.11-2016,
section 9.4.2.79
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments
except that cfg80211_roamed() requires the BSSID and
cfg80211_roamed_bss() requires the bss entry.
Unify the two functions by using a struct for driver initiated
roaming information so that either the BSSID or the bss entry can be
passed as an argument to the unified function.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
[modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[modify brcmfmac to remove the useless cast, spotted by Arend]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even
if the channel context configuration is NULL. This crashes for chipsets
which support 5 Ghz alone when it tries to access members of 'sband'.
Channel context configuration can be NULL in multivif case and when
channel switch is in progress (or) when it fails. Fix this by replacing
the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which
returns a NULL pointer for sband when the channel configuration is NULL.
An example scenario is as below:
In multivif mode (AP + STA) with drivers like ath10k, when we do a
channel switch in the AP vif (which has a number of clients connected)
and a STA vif which is connected to some other AP, when the channel
switch in AP vif fails, while the STA vifs tries to connect to the
other AP, there is a window where the channel context is NULL/invalid
and this results in a crash while the clients connected to the AP vif
tries to reconnect and this race is very similar to the one investigated
by Michal in https://patchwork.kernel.org/patch/3788161/ and this does
happens with hardware that supports 5Ghz alone after long hours of
testing with continuous channel switch on the AP vif
ieee80211 phy0: channel context reservation cannot be finalized because
some interfaces aren't switching
wlan0: failed to finalize CSA, disconnecting
wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice
(Reason: 3=DEAUTH_LEAVING)
WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211]
[<bf77272c>] (sta_info_alloc [mac80211])
[<bf78776c>] (ieee80211_add_station [mac80211]))
[<bf73cc50>] (nl80211_new_station [cfg80211])
Unable to handle kernel NULL pointer dereference at virtual
address 00000014
pgd = d5f4c000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
PC is at sta_info_alloc+0x380/0x3fc [mac80211]
LR is at sta_info_alloc+0x37c/0x3fc [mac80211]
[<bf772738>] (sta_info_alloc [mac80211])
[<bf78776c>] (ieee80211_add_station [mac80211])
[<bf73cc50>] (nl80211_new_station [cfg80211]))
Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When creating a new ipvs service, ipv6 addresses are always accepted
if CONFIG_IP_VS_IPV6 is enabled. On dest creation the address family
is not explicitly checked.
This allows the user-space to configure ipvs services even if the
system is booted with ipv6.disable=1. On specific configuration, ipvs
can try to call ipv6 routing code at setup time, causing the kernel to
oops due to fib6_rules_ops being NULL.
This change addresses the issue adding a check for the ipv6
module being enabled while validating ipv6 service operations and
adding the same validation for dest operations.
According to git history, this issue is apparently present since
the introduction of ipv6 support, and the oops can be triggered
since commit 09571c7ae3 ("IPVS: Add function to determine
if IPv6 address is local")
Fixes: 09571c7ae3 ("IPVS: Add function to determine if IPv6 address is local")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
The sync_refresh_period variable is unsigned, so it can never be < 0.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
There are no in-tree callers of this function and it isn't exported.
Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
This allows the driver to pass in struct ieee80211_tx_status directly.
Make ieee80211_tx_status_noskb a wrapper around it.
As with ieee80211_tx_status_noskb, there is no _ni variant of this call,
because it probably won't be needed.
Even if the driver won't provide any extra status info other than what's
in struct ieee80211_tx_info already, it can optimize status reporting
this way by passing in the station pointer.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[use C99 initializers]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rename .tx_status_noskb to .tx_status_ext and pass a new on-stack
struct ieee80211_tx_status instead of struct ieee80211_tx_info.
This struct can be used to pass extra information, e.g. for dynamic tx
power control
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of hand-coding the bit manipulations, use the bitfield
macros to generate the code for the encoded bitrate.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This field will need to be used again for HE, so rename it now.
Again, mostly done with this spatch:
@@
expression status;
@@
-status->vht_nss
+status->nss
@@
expression status;
@@
-status.vht_nss
+status.nss
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to use kthread_stop() in order to ensure the threads are
shut down before we tear down the nfs_callback_info in nfs_callback_down.
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: bb6aeba736 ("NFSv4.x: Switch to using svc_set_num_threads()...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Refactor to separate out the functions of starting and stopping threads
so that they can be used in other helpers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix to return error code -EINVAL from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 622ec2c9d5 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for l2 multicast flood control was added in commit b6cb5ac833
("net: bridge: add per-port multicast flood flag"). It allows broadcast
as it was introduced specifically for unknown multicast flood control.
But as broadcast is a special case of multicast, this may also need to
be disabled. For this purpose, introduce a flag to disable the flooding
of received l2 broadcasts. This approach is backwards compatible and
provides flexibility in filtering for the desired packet types.
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Mike Manning <mmanning@brocade.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The func fib_flush already flushes the rt cache if necessary, so it
is not necessary to invoke rt_cache_flush again in fib_disable_ip.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no need to verify that cfg->ifname is unique at this point.
register_netdev() will return -EEXIST if asked to create a device with
a name that's alrealy in use.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since netif_carrier_on() will do nothing if device's carrier is already
on, so it's unnecessary to do carrier status check.
It's the same for netif_carrier_off().
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs fixes from Al Viro:
- fix orangefs handling of faults on write() - I'd missed that one back
when orangefs was going through review.
- readdir counterpart of "9p: cope with bogus responses from server in
p9_client_{read,write}" - server might be lying or broken, and we'd
better not overrun the kmalloc'ed buffer we are copying the results
into.
- NFS O_DIRECT read/write can leave iov_iter advanced by too much;
that's what had been causing iov_iter_pipe() warnings davej had been
seeing.
- statx_timestamp.tv_nsec type fix (s32 -> u32). That one really should
go in before 4.11.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
uapi: change the type of struct statx_timestamp.tv_nsec to unsigned
fix nfs O_DIRECT advancing iov_iter too much
p9_client_readdir() fix
orangefs_bufmap_copy_from_iovec(): fix EFAULT handling
I wrongly assumed tp->tcp_mstamp was up to date at the time
tcp_rack_reo_timeout() was called.
It is not true, since we only update tcp->tcp_mstamp when receiving
a packet (as initially done in commit 69e996c58a ("tcp: add
tp->tcp_mstamp field")
tcp_rack_reo_timeout() being called by a timer and not an incoming
packet, we need to refresh tp->tcp_mstamp
Fixes: 7c1c730859 ("tcp: do not pass timestamp to tcp_rack_detect_loss()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In xfrm_input() when called from GRO, async == 0, and we end up
skipping the processing in xfrm4_transport_finish(). GRO path will
always skip the NF_HOOK, so we don't need the special-case for
!NETFILTER during GRO processing.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The introduced namespace support moved the BCM variables for procfs into a
per-net data structure. This leads to a build failure with disabled procfs:
on x86_64:
when CONFIG_PROC_FS is not enabled:
../net/can/bcm.c:1541:14: error: 'struct netns_can' has no member named 'bcmproc_dir'
../net/can/bcm.c:1601:14: error: 'struct netns_can' has no member named 'bcmproc_dir'
../net/can/bcm.c:1696:11: error: 'struct netns_can' has no member named 'bcmproc_dir'
../net/can/bcm.c:1707:15: error: 'struct netns_can' has no member named 'bcmproc_dir'
http://marc.info/?l=linux-can&m=149321842526524&w=2
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The multicast variable in the ieee80211_accept_frame() function is
treated as a boolean, but defined as int. Fix that.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At least on iwlwifi, sometimes lockdep complains that we can
lock
chanctx_mtx -> mvm.mutex -> iflist_mtx
(due to iterate_interfaces)
and
iflist_mtx -> chanctx_mtx
Remove the latter dependency in mac80211 by using the RTNL
that we already hold in one case, and can relatively easily
achieve in the other case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_frame_acked is called when a frame is acked by
the peer. In case this is a management frame, we check
if this an SMPS frame, in which case we can update our
antenna configuration.
When we parse the management frame we look at the category
in case it is an action frame. That byte sits after the IV
in case the frame was encrypted. This means that if the
frame was encrypted, we basically look at the IV instead
of looking at the category. It is then theorically
possible that we think that an SMPS action frame was acked
where really we had another frame that was encrypted.
Since the only management frame whose ack needs to be
tracked is the SMPS action frame, and that frame is not
a robust management frame, it will never be encrypted.
The easiest way to fix this problem is then to not look
at frames that were encrypted.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For multiple scheduled scan support the driver needs to know which
scheduled scan request is being stopped. Pass the request id in the
.sched_scan_stop() callback.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch allows for the scheduled scan request to specify matchsets
for specific BSSIDs.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[docs, netlink policy fix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch implements the idea to have multiple scheduled scan requests
running concurrently. It mainly illustrates how to deal with the incoming
request from user-space in terms of backward compatibility. In order to
use multiple scheduled scans user-space needs to provide a flag attribute
NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is
treated as a legacy scan.
Drivers currently supporting scheduled scan are now indicating they support
a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[clean up netlink destroy path to avoid allocations, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to allocate a portid structure and then, for
each of those, walk the interfaces - we can just add a flag
to each interface and walk those directly. Due to padding in
the struct, we can even do it without any memory cost, and
it even simplifies the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In situations where an skb is paged, the transport header pointer and
tail pointer can be the same because the skb contents are in frags.
This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a
length of 0 when the length to receive is actually greater than zero.
skb->len is already correctly set in ip6_input_finish() with
pskb_pull(), so use skb->len as it always returns the correct result
for both linear and paged data.
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always zero out ca_priv data in tcp_assign_congestion_control() so that
ca_priv data is cleared out during socket creation.
Also always zero out ca_priv data in tcp_reinit_congestion_control() so
that when cc algorithm is changed, ca_priv data is cleared out as well.
We should still zero out ca_priv data even in TCP_CLOSE state because
user could call connect() on AF_UNSPEC to disconnect the socket and
leave it in TCP_CLOSE state and later call setsockopt() to switch cc
algorithm on this socket.
Fixes: 2b0a8c9ee ("tcp: add CDG congestion control")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey reported a out-of-bound access in ip6_tnl_xmit(), this
is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4
neigh key as an IPv6 address:
neigh = dst_neigh_lookup(skb_dst(skb),
&ipv6_hdr(skb)->daddr);
if (!neigh)
goto tx_err_link_failure;
addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE
addr_type = ipv6_addr_type(addr6);
if (addr_type == IPV6_ADDR_ANY)
addr6 = &ipv6_hdr(skb)->daddr;
memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr));
Also the network header of the skb at this point should be still IPv4
for 4in6 tunnels, we shold not just use it as IPv6 header.
This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it
is, we are safe to do the nexthop lookup using skb_dst() and
ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which
dest address we can pick here, we have to rely on callers to fill it
from tunnel config, so just fall to ip6_route_output() to make the
decision.
Fixes: ea3dc9601b ("ip6_tunnel: Add support for wildcard tunnel endpoints.")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added NULL check to make __dev_kfree_skb_irq consistent with kfree
family of functions.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195289
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices or distributions use HZ=100 or HZ=250
TCP receive buffer autotuning has poor behavior caused by this choice.
Since autotuning happens after 4 ms or 10 ms, short distance flows
get their receive buffer tuned to a very high value, but after an initial
period where it was frozen to (too small) initial value.
With tp->tcp_mstamp introduction, we can switch to high resolution
timestamps almost for free (at the expense of 8 additional bytes per
TCP structure)
Note that some TCP stacks use usec TCP timestamps where this
patch makes even more sense : Many TCP flows have < 500 usec RTT.
Hopefully this finer TS option can be standardized soon.
Tested:
HZ=100 kernel
./netperf -H lpaa24 -t TCP_RR -l 1000 -- -r 10000,10000 &
Peer without patch :
lpaa24:~# ss -tmi dst lpaa23
...
skmem:(r0,rb8388608,...)
rcv_rtt:10 rcv_space:3210000 minrtt:0.017
Peer with the patch :
lpaa23:~# ss -tmi dst lpaa24
...
skmem:(r0,rb428800,...)
rcv_rtt:0.069 rcv_space:30000 minrtt:0.017
We can see saner RCVBUF, and more precise rcv_rtt information.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is no longer needed, everything uses tp->tcp_mstamp instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patch will remove ack_time from struct tcp_sacktag_state
Same info is now found in tp->tcp_mstamp
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer needed, since tp->tcp_mstamp holds the information.
This is needed to remove sack_state.ack_time in a following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer needed, since tp->tcp_mstamp holds the information.
This is needed to remove sack_state.ack_time in a following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not used anymore now tp->tcp_mstamp holds the information.
This is needed to remove sack_state.ack_time in a following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not used anymore now tp->tcp_mstamp holds the information.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is no longer used, since tcp_rack_detect_loss() takes
the timestamp from tp->tcp_mstamp
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can use tp->tcp_mstamp as it contains a recent timestamp.
This removes a call to skb_mstamp_get() from tcp_rack_reo_timeout()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to use precise timestamps in TCP stack, but we do not
want to call possibly expensive kernel time services too often.
tp->tcp_mstamp is guaranteed to be updated once per incoming packet.
We will use it in the following patches, removing specific
skb_mstamp_get() calls, and removing ack_time from
struct tcp_sacktag_state.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now xfrm garbage collection can be triggered by 'ip xfrm policy del'.
These is no reason not to do it after flushing policies, especially
considering that 'garbage collection deferred' is only triggered
when it reaches gc_thresh.
It's no good that the policy is gone but the xdst still hold there.
The worse thing is that xdst->route/orig_dst is also hold and can
not be released even if the orig_dst is already expired.
This patch is to do the garbage collection if there is any policy
removed in xfrm_policy_flush.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
nowadays the NAT extension only stores the interface index
(used to purge connections that got masqueraded when interface goes down)
and pptp nat information.
Previous patches moved nf_ct_nat_ext_add to those places that need it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
make sure nat extension gets added if the master conntrack is subject to
NAT. This will be required once the nat core stops adding it by default.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the nat extension is always attached as soon as nat module is
loaded. However, most NAT uses do not need the nat extension anymore.
Prepare to remove the add-nat-by-default by making those places that need
it attach it if its not present yet.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
krealloc(NULL, ..) is same as kmalloc(), so we can avoid special-casing
the initial allocation after the prealloc removal (we had to use
->alloc_len as the initial allocation size).
This also means we do not zero the preallocated memory anymore; only
offsets[]. Existing code makes sure the new (used) extension space gets
zeroed out.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
