Commit Graph

11266 Commits

Author SHA1 Message Date
Yangyang Li
3ec5f54f7a RDMA/hns: Fix an cmd queue issue when resetting
If a IMP reset caused by some hardware errors and hns RoCE driver reset
occurred at the same time, there is a possiblity that the IMP will stop
dealing with command and users can't use the hardware. The logs are as
follows:

 hns3 0000:fd:00.1: cleaned 0, need to clean 1
 hns3 0000:fd:00.1: firmware version query failed -11
 hns3 0000:fd:00.1: Cmd queue init failed
 hns3 0000:fd:00.1: Upgrade reset level
 hns3 0000:fd:00.1: global reset interrupt

The hns NIC driver divides the reset process into 3 status:
initialization, hardware resetting and softwaring restting. RoCE driver
gets reset status by interfaces provided by NIC driver and commands will
not be sent to the IMP if the driver is in any above status. The main
reason for this issue is that there is a time gap between status 1 and 2,
if the RoCE driver sends commands to the IMP during this gap, the IMP will
stop working because it is not ready.

To eliminate the time gap, the hns NIC driver has added a new interface in
commit a4de02287a ("net: hns3: provide .get_cmdq_stat interface for the
client"), so RoCE driver can ensure that no commands will be sent during
resetting.

Link: https://lore.kernel.org/r/1592314778-52822-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 10:48:39 -03:00
Yangyang Li
98a6151907 RDMA/hns: Fix a calltrace when registering MR from userspace
ibmr.device is assigned after MR is successfully registered, but both
write_mtpt() and frmr_write_mtpt() accesses it during the mr registration
process, which may cause the following error when trying to register MR in
userspace and pbl_hop_num is set to 0.

  pc : hns_roce_mtr_find+0xa0/0x200 [hns_roce]
  lr : set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2]
  sp : ffff00023e73ba20
  x29: ffff00023e73ba20 x28: ffff00023e73bad8
  x27: 0000000000000000 x26: 0000000000000000
  x25: 0000000000000002 x24: 0000000000000000
  x23: ffff00023e73bad0 x22: 0000000000000000
  x21: ffff0000094d9000 x20: 0000000000000000
  x19: ffff8020a6bdb2c0 x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: 0000000000000000
  x13: 0140000000000000 x12: 0040000000000041
  x11: ffff000240000000 x10: 0000000000001000
  x9 : 0000000000000000 x8 : ffff802fb7558480
  x7 : ffff802fb7558480 x6 : 000000000003483d
  x5 : ffff00023e73bad0 x4 : 0000000000000002
  x3 : ffff00023e73bad8 x2 : 0000000000000000
  x1 : 0000000000000000 x0 : ffff0000094d9708
  Call trace:
   hns_roce_mtr_find+0xa0/0x200 [hns_roce]
   set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2]
   hns_roce_v2_write_mtpt+0x14c/0x168 [hns_roce_hw_v2]
   hns_roce_mr_enable+0x6c/0x148 [hns_roce]
   hns_roce_reg_user_mr+0xd8/0x130 [hns_roce]
   ib_uverbs_reg_mr+0x14c/0x2e0 [ib_uverbs]
   ib_uverbs_write+0x27c/0x3e8 [ib_uverbs]
   __vfs_write+0x60/0x190
   vfs_write+0xac/0x1c0
   ksys_write+0x6c/0xd8
   __arm64_sys_write+0x24/0x30
   el0_svc_common+0x78/0x130
   el0_svc_handler+0x38/0x78
   el0_svc+0x8/0xc

Solve above issue by adding a pointer of structure hns_roce_dev as a
parameter of write_mtpt() and frmr_write_mtpt(), so that both of these
functions can access it before finishing MR's registration.

Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1592314629-51715-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 10:47:04 -03:00
Leon Romanovsky
ab183d460d RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake
Missed steps during ECE handshake left userspace application with less
options for the ECE handshake. Pass ECE options in the additional
transitions.

Fixes: 50aec2c313 ("RDMA/mlx5: Return ECE data after modify QP")
Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 09:52:29 -03:00
Mark Zhang
730c891248 RDMA/cma: Protect bind_list and listen_list while finding matching cm id
The bind_list and listen_list must be accessed under a lock, add the
missing locking around the access in cm_ib_id_from_event()

In addition add lockdep asserts to make it clearer what the locking
semantic is here.

  general protection fault: 0000 [#1] SMP NOPTI
  CPU: 226 PID: 126135 Comm: kworker/226:1 Tainted: G OE 4.12.14-150.47-default #1 SLE15
  Hardware name: Cray Inc. Windom/Windom, BIOS 0.8.7 01-10-2020
  Workqueue: ib_cm cm_work_handler [ib_cm]
  task: ffff9c5a60a1d2c0 task.stack: ffffc1d91f554000
  RIP: 0010:cma_ib_req_handler+0x3f1/0x11b0 [rdma_cm]
  RSP: 0018:ffffc1d91f557b40 EFLAGS: 00010286
  RAX: deacffffffffff30 RBX: 0000000000000001 RCX: ffff9c2af5bb6000
  RDX: 00000000000000a9 RSI: ffff9c5aa4ed2f10 RDI: ffffc1d91f557b08
  RBP: ffffc1d91f557d90 R08: ffff9c340cc80000 R09: ffff9c2c0f901900
  R10: 0000000000000000 R11: 0000000000000001 R12: deacffffffffff30
  R13: ffff9c5a48aeec00 R14: ffffc1d91f557c30 R15: ffff9c5c2eea3688
  FS: 0000000000000000(0000) GS:ffff9c5c2fa80000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00002b5cc03fa320 CR3: 0000003f8500a000 CR4: 00000000003406e0
  Call Trace:
  ? rdma_addr_cancel+0xa0/0xa0 [ib_core]
  ? cm_process_work+0x28/0x140 [ib_cm]
  cm_process_work+0x28/0x140 [ib_cm]
  ? cm_get_bth_pkey.isra.44+0x34/0xa0 [ib_cm]
  cm_work_handler+0xa06/0x1a6f [ib_cm]
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __switch_to+0x7c/0x4b0
  ? __switch_to_asm+0x40/0x70
  ? __switch_to_asm+0x34/0x70
  process_one_work+0x1da/0x400
  worker_thread+0x2b/0x3f0
  ? process_one_work+0x400/0x400
  kthread+0x118/0x140
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x22/0x40
  Code: 00 66 83 f8 02 0f 84 ca 05 00 00 49 8b 84 24 d0 01 00 00 48 85 c0 0f 84 68 07 00 00 48 2d d0 01
  00 00 49 89 c4 0f 84 59 07 00 00 <41> 0f b7 44 24 20 49 8b 77 50 66 83 f8 0a 75 9e 49 8b 7c 24 28

Fixes: 4c21b5bcef ("IB/cma: Add net_dev and private data checks to RDMA CM")
Link: https://lore.kernel.org/r/20200616104304.2426081-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 09:48:54 -03:00
Michal Kalderon
0dfbd5ecf2 RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532
Private data passed to iwarp_cm_handler is copied for connection request /
response, but ignored otherwise.  If junk is passed, it is stored in the
event and used later in the event processing.

The driver passes an old junk pointer during connection close which leads
to a use-after-free on event processing.  Set private data to NULL for
events that don 't have private data.

  BUG: KASAN: use-after-free in ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: Read of size 4 at addr ffff8886caa71200 by task kworker/u128:1/5250
  kernel:
  kernel: Workqueue: iw_cm_wq cm_work_handler [iw_cm]
  kernel: Call Trace:
  kernel: dump_stack+0x8c/0xc0
  kernel: print_address_description.constprop.0+0x1b/0x210
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: __kasan_report.cold+0x1a/0x33
  kernel: ? ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: kasan_report+0xe/0x20
  kernel: check_memory_region+0x130/0x1a0
  kernel: memcpy+0x20/0x50
  kernel: ucma_event_handler+0x532/0x560 [rdma_ucm]
  kernel: ? __rpc_execute+0x608/0x620 [sunrpc]
  kernel: cma_iw_handler+0x212/0x330 [rdma_cm]
  kernel: ? iw_conn_req_handler+0x6e0/0x6e0 [rdma_cm]
  kernel: ? enqueue_timer+0x86/0x140
  kernel: ? _raw_write_lock_irq+0xd0/0xd0
  kernel: cm_work_handler+0xd3d/0x1070 [iw_cm]

Fixes: e411e0587e ("RDMA/qedr: Add iWARP connection management functions")
Link: https://lore.kernel.org/r/20200616093408.17827-1-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 09:44:45 -03:00
Gal Pressman
0133654d8e RDMA/efa: Set maximum pkeys device attribute
The max_pkeys device attribute was not set in query device verb, set it to
one in order to account for the default pkey (0xffff). This information is
exposed to userspace and can cause malfunction

Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20200614103534.88060-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 09:41:07 -03:00
Aditya Pakki
90a239ee25 RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq
In case of failure of alloc_ud_wq_attr(), the memory allocated by
rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the
existing clean-up code.

Fixes: d310c4bf8a ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs")
Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 09:35:47 -03:00
Leon Romanovsky
1ea7c546b8 RDMA/core: Annotate CMA unlock helper routine
Fix the following sparse error by adding annotation to
cm_queue_work_unlock() that it releases cm_id_priv->lock lock.

 drivers/infiniband/core/cm.c:936:24: warning: context imbalance in
 'cm_queue_work_unlock' - unexpected unlock

Fixes: e83f195aa4 ("RDMA/cm: Pull duplicated code into cm_queue_work_unlock()")
Link: https://lore.kernel.org/r/20200611130045.1994026-1-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-18 09:34:42 -03:00
Tom Seewald
6769b275a3 RDMA/siw: Fix pointer-to-int-cast warning in siw_rx_pbl()
The variable buf_addr is type dma_addr_t, which may not be the same size
as a pointer.  To ensure it is the correct size, cast to a uintptr_t.

Fixes: c536277e0d ("RDMA/siw: Fix 64/32bit pointer inconsistency")
Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.com
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15 16:00:08 -03:00
Kieran Bingham
0dc63bbee0 RDMA/hfi1: Fix trivial mis-spelling of 'descriptor'
The word 'descriptor' is misspelled throughout the tree.

Fix it up accordingly:
    decriptors -> descriptors

Link: https://lore.kernel.org/r/20200609124610.3445662-3-kieran.bingham+renesas@ideasonboard.com
Link: https://lore.kernel.org/r/20200609124610.3445662-12-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15 15:56:54 -03:00
Tom Seewald
4f5747cf8e RDMA/mlx5: Fix -Wformat warning in check_ucmd_data()
Variables of type size_t should use %zu rather than %lu [1]. The variables
"inlen", "ucmd", "last", and "size" are all size_t, so use the correct
format specifiers.

[1] https://www.kernel.org/doc/html/latest/core-api/printk-formats.html

Fixes: e383085c24 ("RDMA/mlx5: Set ECE options during QP create")
Link: https://lore.kernel.org/r/20200605023012.9527-1-tseewald@gmail.com
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15 15:39:36 -03:00
Colin Ian King
2ef5612391 RDMA/mlx5: Remove duplicated assignment to resp.response_length
The assignment to resp.response_length is never read since it is being
updated again on the next statement. The assignment is redundant so
removed it.

Fixes: a645a89d9a ("RDMA/mlx5: Return ECE DC support")
Link: https://lore.kernel.org/r/20200604143902.56021-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-15 10:48:38 -03:00
Masahiro Yamada
a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Michel Lespinasse
c1e8d7c6a7 mmap locking API: convert mmap_sem comments
Convert comments that reference mmap_sem to reference mmap_lock instead.

[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Michel Lespinasse
d8ed45c5dc mmap locking API: use coccinelle to convert mmap_sem rwsem call sites
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport
65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport
ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport
e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Linus Torvalds
242b233198 RDMA 5.8 merge window pull request
A few large, long discussed works this time. The RNBD block driver has
 been posted for nearly two years now, and the removal of FMR has been a
 recurring discussion theme for a long time. The usual smattering of
 features and bug fixes.
 
 - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
 
 - Continuing driver cleanups in bnxt_re, hns
 
 - Big cleanup of mlx5 QP creation flows
 
 - More consistent use of src port and flow label when LAG is used and a
   mlx5 implementation
 
 - Additional set of cleanups for IB CM
 
 - 'RNBD' network block driver and target. This is a network block RDMA
   device specific to ionos's cloud environment. It brings strong multipath
   and resiliency capabilities.
 
 - Accelerated IPoIB for HFI1
 
 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
 
 - Support for exchanging the new IBTA defiend ECE data during RDMA CM
   exchanges
 
 - Removal of the very old and insecure FMR interface from all ULPs and
   drivers. FRWR should be preferred for at least a decade now.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7X/IwACgkQOG33FX4g
 mxp2uw/+MI2S/aXqEBvZfTT8yrkAwqYezS0VeTDnwH/T6UlTMDhHVN/2Ji3tbbX3
 FEKT1i2mnAL5RqUAL1lr9g4sG/bVozrpN46Ws5Lu9dTbIPLKTNPWDuLFQDUShKY7
 OyMI/bRx6anGnsOy20iiBqnrQbrrZj5TECgnmrkAl62QFdcl7aBWe/yYjy4CT11N
 ub+aBXBREN1F1pc0HIjd2tI+8gnZc+mNm1LVVDRH9Capun/pI26qDNh7e6QwGyIo
 n8ItraC8znLwv/nsUoTE7/JRcsTEe6vJI26PQmczZfNJs/4O65G7fZg0eSBseZYi
 qKf7Uwtb3qW0R7jRUMEgFY4DKXVAA0G2ph40HXBuzOSsqlT6HqYMO2wgG8pJkrTc
 qAjoSJGzfAHIsjxzxKI8wKuufCddjCm30VWWU7EKeriI6h1J0uPVqKkQMfYBTkik
 696eZSBycAVgwayOng3XaehiTxOL7qGMTjUpDjUR6UscbiPG919vP+QsbIUuBXdb
 YoddBQJdyGJiaCXv32ciJjo9bjPRRi/bII7Q5qzCNI2mi4ZVbudF4ffzyQvdHtNJ
 nGnpRXoPi7kMvUrKTMPWkFjj0R5/UsPszsA51zbxPydfgBe0Dlc2PrrIG8dlzYAp
 wbV0Lec+iJucKlt7EZtrjz1xOiOOaQt/5/cW1bWqL+wk2t6gAuY=
 =9zTe
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A more active cycle than most of the recent past, with a few large,
  long discussed works this time.

  The RNBD block driver has been posted for nearly two years now, and
  flowing through RDMA due to it also introducing a new ULP.

  The removal of FMR has been a recurring discussion theme for a long
  time.

  And the usual smattering of features and bug fixes.

  Summary:

   - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa

   - Continuing driver cleanups in bnxt_re, hns

   - Big cleanup of mlx5 QP creation flows

   - More consistent use of src port and flow label when LAG is used and
     a mlx5 implementation

   - Additional set of cleanups for IB CM

   - 'RNBD' network block driver and target. This is a network block
     RDMA device specific to ionos's cloud environment. It brings strong
     multipath and resiliency capabilities.

   - Accelerated IPoIB for HFI1

   - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
     async fds

   - Support for exchanging the new IBTA defiend ECE data during RDMA CM
     exchanges

   - Removal of the very old and insecure FMR interface from all ULPs
     and drivers. FRWR should be preferred for at least a decade now"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
  RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
  RDMA/mlx5: Return ECE DC support
  RDMA/mlx5: Don't rely on FW to set zeros in ECE response
  RDMA/mlx5: Return an error if copy_to_user fails
  IB/hfi1: Use free_netdev() in hfi1_netdev_free()
  RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
  RDMA/core: Move and rename trace_cm_id_create()
  IB/hfi1: Fix hfi1_netdev_rx_init() error handling
  RDMA: Remove 'max_map_per_fmr'
  RDMA: Remove 'max_fmr'
  RDMA/core: Remove FMR device ops
  RDMA/rdmavt: Remove FMR memory registration
  RDMA/mthca: Remove FMR support for memory registration
  RDMA/mlx4: Remove FMR support for memory registration
  RDMA/i40iw: Remove FMR leftovers
  RDMA/bnxt_re: Remove FMR leftovers
  RDMA/mlx5: Remove FMR leftovers
  RDMA/core: Remove FMR pool API
  RDMA/rds: Remove FMR support for memory registration
  RDMA/srp: Remove support for FMR memory registration
  ...
2020-06-05 14:05:57 -07:00
Linus Torvalds
cb8e59cc87 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...
2020-06-03 16:27:18 -07:00
Ka-Cheong Poon
fba97dc7fc RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
If the cm_id state is IB_CM_REP_SENT when cm_destroy_id() is called, it
calls cm_send_rej_locked().

In cm_send_rej_locked(), it calls cm_enter_timewait() and the state is
changed to IB_CM_TIMEWAIT.

Now back to cm_destroy_id(), it breaks from the switch statement, and the
next call is WARN_ON(cm_id->state != IB_CM_IDLE).

This triggers a spurious warning. Instead, the code should goto retest
after returning from cm_send_rej_locked() to move the state to IDLE.

Fixes: 67b3c8dcea ("RDMA/cm: Make sure the cm_id is in the IB_CM_IDLE state in destroy")
Link: https://lore.kernel.org/r/1591191218-9446-1-git-send-email-ka-cheong.poon@oracle.com
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-03 15:48:18 -03:00
Leon Romanovsky
a645a89d9a RDMA/mlx5: Return ECE DC support
The DC QPs are many-to-one QP types that means that first connection will
establish ECE options that coming connections should follow.  Due to this
property, the ECE code was removed between first [1] and second [2] ECE
submissions.

This patch returns the dropped code, because ECE is a property of a
connection and like any other connection users are needed to manage this
data. Allow them to set ECE parameter for DC too and avoid need of having
compatibility flag for the DC ECE.

[1]
https://lore.kernel.org/linux-rdma/20200523132243.817936-1-leon@kernel.org/
[2]
https://lore.kernel.org/linux-rdma/20200525174401.71152-1-leon@kernel.org/

Link: https://lore.kernel.org/r/20200602125548.172654-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-03 15:45:02 -03:00
Leon Romanovsky
92cd667c0e RDMA/mlx5: Don't rely on FW to set zeros in ECE response
The FW returns zeros in case feature is not enabled, but it is better to
have the capability check and ensure that returned result is cleared.

Fixes: 3e09a427ae ("RDMA/mlx5: Get ECE options from FW during create QP")
Link: https://lore.kernel.org/r/20200602125548.172654-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-03 15:45:02 -03:00
Leon Romanovsky
6512f11d38 RDMA/mlx5: Return an error if copy_to_user fails
In theoretical event, the ib_copy_to_udata() can fail, so return -EFAULT
error to the user, so he will destroy the QP.

Fixes: 50aec2c313 ("RDMA/mlx5: Return ECE data after modify QP")
Link: https://lore.kernel.org/r/20200602125548.172654-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-03 15:45:01 -03:00
YueHaibing
193ba03141 IB/hfi1: Use free_netdev() in hfi1_netdev_free()
dummy_netdev shold be freed by free_netdev() instead of kfree(). Also
remove unneeded variable 'priv'

Fixes: 4730f4a6c6 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/20200602061635.31224-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 21:35:03 -03:00
Dan Carpenter
87d9e56849 RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
The "dmac" variable is used before it is initialized.

Fixes: 494c3b3122 ("RDMA/hns: Refactor the QP context filling process related to WQE buffer configure")
Link: https://lore.kernel.org/r/20200529083918.GA1298465@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Chuck Lever
278f74b39e RDMA/core: Move and rename trace_cm_id_create()
The restrack ID for an rdma_cm_id is not assigned until it is
associated with a device.

Here's an example I captured while testing NFS/RDMA's support for
DEVICE_REMOVAL. The new tracepoint name is "cm_id_attach".

           <...>-4261  [001]   366.581299: cm_event_handler:     cm.id=0 src=0.0.0.0:45919 dst=192.168.2.55:20049 tos=0 ADDR_ERROR (1/-19)
           <...>-4261  [001]   366.581304: cm_event_done:        cm.id=0 src=0.0.0.0:45919 dst=192.168.2.55:20049 tos=0 ADDR_ERROR consumer returns 0
           <...>-1950  [000]   366.581309: cm_id_destroy:        cm.id=0 src=0.0.0.0:45919 dst=192.168.2.55:20049 tos=0
           <...>-7     [001]   369.589400: cm_event_handler:     cm.id=0 src=0.0.0.0:49023 dst=192.168.2.55:20049 tos=0 ADDR_ERROR (1/-19)
           <...>-7     [001]   369.589404: cm_event_done:        cm.id=0 src=0.0.0.0:49023 dst=192.168.2.55:20049 tos=0 ADDR_ERROR consumer returns 0
           <...>-1950  [000]   369.589407: cm_id_destroy:        cm.id=0 src=0.0.0.0:49023 dst=192.168.2.55:20049 tos=0
           <...>-4261  [001]   372.597650: cm_id_attach:         cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 device=mlx4_0
           <...>-4261  [001]   372.597652: cm_event_handler:     cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED (0/0)
           <...>-4261  [001]   372.597654: cm_event_done:        cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ADDR_RESOLVED consumer returns 0
           <...>-4261  [001]   372.597738: cm_event_handler:     cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED (2/0)
           <...>-4261  [001]   372.597740: cm_event_done:        cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ROUTE_RESOLVED consumer returns 0
           <...>-4691  [007]   372.600101: cm_qp_create:         cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 pd.id=2 qp_type=RC send_wr=4091 recv_wr=256 qp_num=530 rc=0
           <...>-4691  [007]   372.600207: cm_send_req:          cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 qp_num=530
           <...>-185   [002]   372.601212: cm_send_mra:          cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0
           <...>-185   [002]   372.601362: cm_send_rtu:          cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0
           <...>-185   [002]   372.601372: cm_event_handler:     cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ESTABLISHED (9/0)
           <...>-185   [002]   372.601379: cm_event_done:        cm.id=0 src=192.168.2.51:47492 dst=192.168.2.55:20049 tos=0 ESTABLISHED consumer returns 0

Fixes: ed999f820a ("RDMA/cma: Add trace points in RDMA Connection Manager")
Link: https://lore.kernel.org/r/20200530174934.21362.56754.stgit@manet.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Dan Carpenter
24c567ff75 IB/hfi1: Fix hfi1_netdev_rx_init() error handling
The hfi1_vnic_up() function doesn't check whether hfi1_netdev_rx_init()
returns errors.  In hfi1_vnic_init() we need to change the code to
preserve the error code instead of returning success.

Fixes: 2280740f01 ("IB/hfi1: Virtual Network Interface Controller (VNIC) HW support")
Fixes: 4730f4a6c6 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/20200530140224.GA1330098@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Jason Gunthorpe
4d12c04caa RDMA: Remove 'max_map_per_fmr'
Now that FMR support is gone, this attribute can be deleted from all
places.

Link: https://lore.kernel.org/r/13-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Jason Gunthorpe
649392bf75 RDMA: Remove 'max_fmr'
Now that FMR support is gone, this attribute can be deleted from all
places.

Link: https://lore.kernel.org/r/12-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Max Gurtovoy
3a578152a9 RDMA/core: Remove FMR device ops
After removing FMR support from all the RDMA ULPs and providers, there
is no need to keep FMR operation for IB devices.

Link: https://lore.kernel.org/r/11-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Max Gurtovoy
22c9cc2408 RDMA/rdmavt: Remove FMR memory registration
Use FRWR method to register memory by default and remove the ancient and
unsafe FMR method.

Link: https://lore.kernel.org/r/10-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Max Gurtovoy
d6747b3715 RDMA/mthca: Remove FMR support for memory registration
Remove the ancient and unsafe FMR method.

Link: https://lore.kernel.org/r/9-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Max Gurtovoy
1f55b7ab90 RDMA/mlx4: Remove FMR support for memory registration
HCA's that are driven by mlx4 driver support FRWR method to register
memory. Remove the ancient and unsafe FMR method.

Link: https://lore.kernel.org/r/8-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Jason Gunthorpe
f0c73c70db RDMA/i40iw: Remove FMR leftovers
The ibfmr member is never referenced, remove it.

Link: https://lore.kernel.org/r/7-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:54 -03:00
Jason Gunthorpe
7c08bc1956 RDMA/bnxt_re: Remove FMR leftovers
The bnxt_re_fmr struct is never referenced and the max_fmr items
in bnxt_qplib_dev_attr are never read.

Link: https://lore.kernel.org/r/6-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:53 -03:00
Gal Pressman
d29d58e772 RDMA/mlx5: Remove FMR leftovers
Remove a few leftovers from FMR functionality which are no longer used.

Link: https://lore.kernel.org/r/5-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:53 -03:00
Max Gurtovoy
4e373d5417 RDMA/core: Remove FMR pool API
This ancient and unsafe method for memory registration is no longer used
by any RDMA based ULP. Remove the FMR pool API from the core driver.

Link: https://lore.kernel.org/r/4-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:53 -03:00
Max Gurtovoy
f273ad4f8d RDMA/srp: Remove support for FMR memory registration
FMR is not supported on most recent RDMA devices (that use fast memory
registration mechanism). Also, FMR was recently removed from NFS/RDMA
ULP.

Link: https://lore.kernel.org/r/2-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:53 -03:00
Israel Rukshin
1fc431320a RDMA/iser: Remove support for FMR memory registration
FMR is not supported on most recent RDMA devices (that use fast memory
registration mechanism). Also, FMR was recently removed from NFS/RDMA
ULP.

Link: https://lore.kernel.org/r/1-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-06-02 20:32:53 -03:00
Linus Torvalds
e0cd920687 Merge branch 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess/access_ok updates from Al Viro:
 "Removals of trivially pointless access_ok() calls.

  Note: the fiemap stuff was removed from the series, since they are
  duplicates with part of ext4 series carried in Ted's tree"

* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vmci_host: get rid of pointless access_ok()
  hfi1: get rid of pointless access_ok()
  usb: get rid of pointless access_ok() calls
  lpfc_debugfs: get rid of pointless access_ok()
  efi_test: get rid of pointless access_ok()
  drm_read(): get rid of pointless access_ok()
  via-pmu: don't bother with access_ok()
  drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
  omapfb: get rid of pointless access_ok() calls
  amifb: get rid of pointless access_ok() calls
  drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
  drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
  cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
  nvram: drop useless access_ok()
  n_hdlc_tty_read(): remove pointless access_ok()
  tomoyo_write_control(): get rid of pointless access_ok()
  btrfs_ioctl_send(): don't bother with access_ok()
  fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
  dlmfs_file_write(): get rid of pointless access_ok()
2020-06-01 16:09:43 -07:00
David S. Miller
1806c13dc2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.

The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31 17:48:46 -07:00
Saeed Mahameed
971ae1ed03 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
net/mlx5: Add ability to read and write ECE options
  net/mlx5: Add support for RDMA TX FT headers modifying
  net/mlx5: Move iseg access helper routines close to mlx5_core driver
  net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits
  net/mlx5: Add support in forward to namespace
  {IB/net}/mlx5: Simplify don't trap code
  net/mlx5: Replace zero-length array with flexible-array

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-29 14:38:57 -07:00
Yamin Friedman
c7ff819aef RDMA/core: Introduce shared CQ pool API
Allow a ULP to ask the core to provide a completion queue based on a
least-used search on a per-device CQ pools. The device CQ pools grow in a
lazy fashion when more CQs are requested.

This feature reduces the amount of interrupts when using many QPs.  Using
shared CQs allows for more effcient completion handling. It also reduces
the amount of overhead needed for CQ contexts.

Test setup:
Intel(R) Xeon(R) Platinum 8176M CPU @ 2.10GHz servers.
Running NVMeoF 4KB read IOs over ConnectX-5EX across Spectrum switch.
TX-depth = 32. The patch was applied in the nvme driver on both the target
and initiator. Four controllers are accessed from each core. In the
current test case we have exposed sixteen NVMe namespaces using four
different subsystems (four namespaces per subsystem) from one NVM port.
Each controller allocated X queues (RDMA QPs) and attached to Y CQs.
Before this series we had X == Y, i.e for four controllers we've created
total of 4X QPs and 4X CQs. In the shared case, we've created 4X QPs and
only X CQs which means that we have four controllers that share a
completion queue per core. Until fourteen cores there is no significant
change in performance and the number of interrupts per second is less than
a million in the current case.
==================================================
|Cores|Current KIOPs  |Shared KIOPs  |improvement|
|-----|---------------|--------------|-----------|
|14   |2332           |2723          |16.7%      |
|-----|---------------|--------------|-----------|
|20   |2086           |2712          |30%        |
|-----|---------------|--------------|-----------|
|28   |1971           |2669          |35.4%      |
|=================================================
|Cores|Current avg lat|Shared avg lat|improvement|
|-----|---------------|--------------|-----------|
|14   |767us          |657us         |14.3%      |
|-----|---------------|--------------|-----------|
|20   |1225us         |943us         |23%        |
|-----|---------------|--------------|-----------|
|28   |1816us         |1341us        |26.1%      |
========================================================
|Cores|Current interrupts|Shared interrupts|improvement|
|-----|------------------|-----------------|-----------|
|14   |1.6M/sec          |0.4M/sec         |72%        |
|-----|------------------|-----------------|-----------|
|20   |2.8M/sec          |0.6M/sec         |72.4%      |
|-----|------------------|-----------------|-----------|
|28   |2.9M/sec          |0.8M/sec         |63.4%      |
====================================================================
|Cores|Current 99.99th PCTL lat|Shared 99.99th PCTL lat|improvement|
|-----|------------------------|-----------------------|-----------|
|14   |67ms                    |6ms                    |90.9%      |
|-----|------------------------|-----------------------|-----------|
|20   |5ms                     |6ms                    |-10%       |
|-----|------------------------|-----------------------|-----------|
|28   |8.7ms                   |6ms                    |25.9%      |
|===================================================================

Performance improvement with sixteen disks (sixteen CQs per core) is
comparable.

Link: https://lore.kernel.org/r/1590568495-101621-3-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 16:09:02 -03:00
Yamin Friedman
3446cbd2d5 RDMA/core: Add protection for shared CQs used by ULPs
A pre-step for adding shared CQs. Add the infrastructure to prevent shared
CQ users from altering the CQ configurations. For now all cqs are marked
as private (non-shared). The core driver should use the new force
functions to perform resize/destroy/moderation changes that are not
allowed for users of shared CQs.

Link: https://lore.kernel.org/r/1590568495-101621-2-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 15:40:51 -03:00
Qiushi Wu
0b8e125e21 RDMA/core: Fix several reference count leaks.
kobject_init_and_add() takes reference even when it fails.  If this
function returns an error, kobject_put() must be called to properly clean
up the memory associated with the object. Previous
commit b8eb718348 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.

Link: https://lore.kernel.org/r/20200528030231.9082-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 15:35:49 -03:00
Colin Ian King
bcafcdfdae IB/hfi1: Fix spelling mistake "enought" -> "enough"
There is a spelling mistake in an error message. Fix it.

Link: https://lore.kernel.org/r/20200528110709.400935-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 15:27:51 -03:00
Colin Ian King
48062b0a8b RDMA/hns: remove duplicate assignment to pointer raq
The pointer raq is being assigned twice. Fix this by removing one of the
redundant assignments.

Fixes: 14ba87304b ("RDMA/hns: Remove redundant type cast for general pointers")
Link: https://lore.kernel.org/r/20200528150427.420624-1-colin.king@canonical.com
Addressses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 15:19:57 -03:00
Mark Zhang
802dcc7fc5 RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode
The mlx5 VF driver doesn't set QP tx port affinity because it doesn't know
if the lag is active or not, since the "lag_active" works only for PF
interfaces. In this case for VF interfaces only one lag is used which
brings performance issue.

Add a lag_tx_port_affinity CAP bit; When it is enabled and
"num_lag_ports > 1", then driver always set QP tx affinity, regardless
of lag state.

Link: https://lore.kernel.org/r/20200527055014.355093-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 15:15:30 -03:00
Bart Van Assche
e0cca8b456 RDMA/srpt: Increase max_send_sge
The ib_srpt driver limits max_send_sge to 16. Since that is a workaround
for an mlx4 bug that has been fixed, increase max_send_sge. See also
commit f95ccffc71 ("IB/mlx4: Use 4K pages for kernel QP's WQE buffer").

Link: https://lore.kernel.org/r/20200525172212.14413-5-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29 14:49:55 -03:00