Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-6-iii@linux.ibm.com
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-4-iii@linux.ibm.com
Instead of using subtests in bpf_verif_scale selftest, turn each scale
sub-test into its own test. Each subtest is compltely independent and
just reuses a bit of common test running logic, so the conversion is
trivial. For convenience, keep all of BPF verifier scale tests in one
file.
This conversion shaves off a significant amount of time when running
test_progs in parallel mode. E.g., just running scale tests (-t verif_scale):
BEFORE
======
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m22.894s
user 0m0.012s
sys 0m22.797s
AFTER
=====
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m12.044s
user 0m0.024s
sys 0m27.869s
Ten second saving right there. test_progs -j is not yet ready to be
turned on by default, unfortunately, and some tests fail almost every
time, but this is a good improvement nevertheless. Ignoring few
failures, here is sequential vs parallel run times when running all
tests now:
SEQUENTIAL
==========
Summary: 206/953 PASSED, 4 SKIPPED, 0 FAILED
real 1m5.625s
user 0m4.211s
sys 0m31.650s
PARALLEL
========
Summary: 204/952 PASSED, 4 SKIPPED, 2 FAILED
real 0m35.550s
user 0m4.998s
sys 0m39.890s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-5-andrii@kernel.org
It seems to cause a lot of harm to kprobe/tracepoint selftests. Yucong
mentioned before that it does manipulate sysfs, which might be the
reason. So let's mark it as serial, though ideally it would be less
intrusive on the system at test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-4-andrii@kernel.org
Revamp how test discovery works for test_progs and allow multiple test
entries per file. Any global void function with no arguments and
serial_test_ or test_ prefix is considered a test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-3-andrii@kernel.org
Ensure that all test entry points are global void functions with no
input arguments. Mark few subtest entry points as static.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-2-andrii@kernel.org
Add unit tests for deduplication of BTF_KIND_DECL_TAG to typedef types.
Also changed a few comments from "tag" to "decl_tag" to match
BTF_KIND_DECL_TAG enum value name.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211021195638.4019770-1-yhs@fb.com
- update custom loader to search by name, not section name
- update bpftool commands to use proper pin path
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211021214814.1236114-4-sdf@google.com
Replace the calls to btf__get_nr_types/btf__get_raw_data in
selftests with new APIs btf__type_cnt/btf__raw_data. The old
APIs will be deprecated in libbpf v0.7+.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022130623.1548429-6-hengqi.chen@gmail.com
Recent change to use tp/syscalls/sys_enter_nanosleep for perf_buffer
selftests causes this selftest to fail on 4.9 kernel in libbpf CI ([0]):
libbpf: prog 'handle_sys_enter': failed to attach to perf_event FD 6: Invalid argument
libbpf: prog 'handle_sys_enter': failed to attach to tracepoint 'syscalls/sys_enter_nanosleep': Invalid argument
It's not exactly clear why, because perf_event itself is created for
this tracepoint, but I can't even compile 4.9 kernel locally, so it's
hard to figure this out. If anyone has better luck and would like to
help investigating this, I'd really appreciate this.
For now, unblock CI by switching back to raw_syscalls/sys_enter, but reduce
amount of unnecessary samples emitted by filter by process ID. Use
explicit ARRAY map for that to make it work on 4.9 as well, because
global data isn't yet supported there.
Fixes: aa274f98b2 ("selftests/bpf: Fix possible/online index mismatch in perf_buffer test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022201342.3490692-1-andrii@kernel.org
Utilize libbpf's feature of allowing to lookup internal maps by their
ELF section names. No need to guess or calculate the exact truncated
prefix taken from the object name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-11-andrii@kernel.org
Enhance existing selftests to demonstrate the use of custom
.data/.rodata sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-9-andrii@kernel.org
The perf buffer tests triggers trace with nanosleep syscall,
but monitors all syscalls, which results in lot of data in the
buffer and makes it harder to debug. Let's lower the trace
traffic and monitor just nanosleep syscall.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-4-jolsa@kernel.org
The perf_buffer fails on system with offline cpus:
# test_progs -t perf_buffer
serial_test_perf_buffer:PASS:nr_cpus 0 nsec
serial_test_perf_buffer:PASS:nr_on_cpus 0 nsec
serial_test_perf_buffer:PASS:skel_load 0 nsec
serial_test_perf_buffer:PASS:attach_kprobe 0 nsec
serial_test_perf_buffer:PASS:perf_buf__new 0 nsec
serial_test_perf_buffer:PASS:epoll_fd 0 nsec
skipping offline CPU #4
serial_test_perf_buffer:PASS:perf_buffer__poll 0 nsec
serial_test_perf_buffer:PASS:seen_cpu_cnt 0 nsec
serial_test_perf_buffer:PASS:buf_cnt 0 nsec
...
serial_test_perf_buffer:PASS:fd_check 0 nsec
serial_test_perf_buffer:PASS:drain_buf 0 nsec
serial_test_perf_buffer:PASS:consume_buf 0 nsec
serial_test_perf_buffer:FAIL:cpu_seen cpu 5 not seen
#88 perf_buffer:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
If the offline cpu is from the middle of the possible set,
we get mismatch with possible and online cpu buffers.
The perf buffer test calls perf_buffer__consume_buffer for
all 'possible' cpus, but the library holds only 'online'
cpu buffers and perf_buffer__consume_buffer returns them
based on index.
Adding extra (online) index to keep track of online buffers,
we need the original (possible) index to trigger trace on
proper cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-3-jolsa@kernel.org
verified_insns field was added to response of bpf_obj_get_info_by_fd
call on a prog. Confirm that it's being populated by loading a simple
program and asking for its info.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211020074818.1017682-3-davemarchevsky@fb.com
Some new verifier tests that hit some important gaps in the parameter
space for atomic ops.
There are already exhaustive tests for the JIT part in
lib/test_bpf.c, but these exercise the verifier too.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211015093318.1273686-1-jackmanb@google.com
cpu_number exists only on Intel and aarch64, so skip the test involing
it on other arches. An alternative would be to replace it with an
exported non-ifdefed primitive-typed percpu variable from the common
code, but there appears to be none.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211013160902.428340-2-iii@linux.ibm.com
Fix following checkincludes.pl warning:
./scripts/checkincludes.pl tools/testing/selftests/bpf/cgroup_helpers.c
tools/testing/selftests/bpf/cgroup_helpers.c: unistd.h is included more
than once.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211012023231.19911-1-wanjiabing@vivo.com
Patch set [1] introduced BTF_KIND_TAG to allow tagging
declarations for struct/union, struct/union field, var, func
and func arguments and these tags will be encoded into
dwarf. They are also encoded to btf by llvm for the bpf target.
After BTF_KIND_TAG is introduced, we intended to use it
for kernel __user attributes. But kernel __user is actually
a type attribute. Upstream and internal discussion showed
it is not a good idea to mix declaration attribute and
type attribute. So we proposed to introduce btf_type_tag
as a type attribute and existing btf_tag renamed to
btf_decl_tag ([2]).
This patch renamed BTF_KIND_TAG to BTF_KIND_DECL_TAG and some
other declarations with *_tag to *_decl_tag to make it clear
the tag is for declaration. In the future, BTF_KIND_TYPE_TAG
might be introduced per [3].
[1] https://lore.kernel.org/bpf/20210914223004.244411-1-yhs@fb.com/
[2] https://reviews.llvm.org/D111588
[3] https://reviews.llvm.org/D111199
Fixes: b5ea834dde ("bpf: Support for new btf kind BTF_KIND_TAG")
Fixes: 5b84bd1036 ("libbpf: Add support for BTF_KIND_TAG")
Fixes: 5c07f2fec0 ("bpftool: Add support for BTF_KIND_TAG")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211012164838.3345699-1-yhs@fb.com
The verifier tests added in commit c48e51c8b0 ("bpf: selftests: Add
selftests for module kfunc support") fail on s390, since the JIT does
not support calling kernel functions. This is most likely an issue for
all the other non-Intel arches, as well as on Intel with
!CONFIG_DEBUG_INFO_BTF or !CONFIG_BPF_JIT.
Trying to check for messages from all the possible add_kfunc_call()
failure cases in test_verifier looks pointless, so do a much simpler
thing instead: just like it's already done in do_prog_test_run(), skip
the tests that fail to load with ENOTSUPP.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211007173329.381754-1-iii@linux.ibm.com
bpf_get_current_pid_tgid() returns u64, whose upper 32 bits are the same
as userspace getpid() return value.
Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006185619.364369-13-fallentree@fb.com
This patch make each worker use a unique cgroup base directory, thus
allowing tests that uses cgroups to run concurrently.
Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006185619.364369-5-fallentree@fb.com
This patch allows tests to define serial_test_name() instead of
test_name(), and this will make test_progs execute those in sequence
after all other tests finished executing concurrently.
Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006185619.364369-3-fallentree@fb.com
This patch adds "-j" mode to test_progs, executing tests in multiple
process. "-j" mode is optional, and works with all existing test
selection mechanism, as well as "-v", "-l" etc.
In "-j" mode, main process use UDS/SEQPACKET to communicate to each forked
worker, commanding it to run tests and collect logs. After all tests are
finished, a summary is printed. main process use multiple competing
threads to dispatch work to worker, trying to keep them all busy.
The test status will be printed as soon as it is finished, if there are
error logs, it will be printed after the final summary line.
By specifying "--debug", additional debug information on server/worker
communication will be printed.
Example output:
> ./test_progs -n 15-20 -j
[ 12.801730] bpf_testmod: loading out-of-tree module taints kernel.
Launching 8 workers.
#20 btf_split:OK
#16 btf_endian:OK
#18 btf_module:OK
#17 btf_map_in_map:OK
#19 btf_skc_cls_ingress:OK
#15 btf_dump:OK
Summary: 6/20 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006185619.364369-2-fallentree@fb.com
Add a writable bare tracepoint in bpf_testmod module, and
trigger its calling when reading /sys/kernel/bpf_testmod
with a specific buffer length. The reading will return
the value in writable context if the early return flag
is enabled in writable context.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211004094857.30868-4-hotforest@gmail.com
With "make install", bpftool installs its binary and its bash completion
file. Usually, this is what we want. But a few components in the kernel
repository (namely, BPF iterators and selftests) also install bpftool
locally before using it. In such a case, bash completion is not
necessary and is just a useless build artifact.
Let's add an "install-bin" target to bpftool, to offer a way to install
the binary only.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-13-quentin@isovalent.com
The script test_bpftool_build.sh attempts to build bpftool in the
various supported ways, to make sure nothing breaks.
One of those ways is to run "make tools/bpf" from the root of the kernel
repository. This command builds bpftool, along with the other tools
under tools/bpf, and runqslower in particular. After running the
command and upon a successful bpftool build, the script attempts to
cleanup the generated objects. However, after building with this target
and in the case of runqslower, the files are not cleaned up as expected.
This is because the "tools/bpf" target sets $(OUTPUT) to
.../tools/bpf/runqslower/ when building the tool, causing the object
files to be placed directly under the runqslower directory. But when
running "cd tools/bpf; make clean", the value for $(OUTPUT) is set to
".output" (relative to the runqslower directory) by runqslower's
Makefile, and this is where the Makefile looks for files to clean up.
We cannot easily fix in the root Makefile (where "tools/bpf" is defined)
or in tools/scripts/Makefile.include (setting $(OUTPUT)), where changing
the way the output variables are passed would likely have consequences
elsewhere. We could change runqslower's Makefile to build in the
repository instead of in a dedicated ".output/", but doing so just to
accommodate a test script doesn't sound great. Instead, let's just make
sure that we clean up runqslower properly by adding the correct command
to the script.
This will attempt to clean runqslower twice: the first try with command
"cd tools/bpf; make clean" will search for tools/bpf/runqslower/.output
and fail to clean it (but will still clean the other tools, in
particular bpftool), the second one (added in this commit) sets the
$(OUTPUT) variable like for building with the "tool/bpf" target and
should succeed.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-12-quentin@isovalent.com
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that runqslower installs the
headers properly when building.
We use a libbpf_hdrs target to mark the logical dependency on libbpf's
headers export for a number of object files, even though the headers
should have been exported at this time (since bpftool needs them, and is
required to generate the skeleton or the vmlinux.h).
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
BPFOBJ_OUTPUT and BPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests. We pass a number of
variables to the "make" invocation, because we want to point runqslower
to the (target) libbpf shared with other tools, instead of building its
own version. In addition, runqslower relies on (target) bpftool, and we
also want to pass the proper variables to its Makefile so that bpftool
itself reuses the same libbpf.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-6-quentin@isovalent.com
API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that resolve_btfids installs the
headers properly when building.
When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
LIBBPF_OUT and LIBBPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.
Also adjust the Makefile for the BPF selftests in order to point to the
(target) libbpf shared with other tools, instead of building a version
specific to resolve_btfids. Remove libbpf's order-only dependencies on
the include directories (they are created by libbpf and don't need to
exist beforehand).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-5-quentin@isovalent.com
Bpftool relies on libbpf, therefore it relies on a number of headers
from the library and must be linked against the library. The Makefile
for bpftool exposes these objects by adding tools/lib as an include
directory ("-I$(srctree)/tools/lib"). This is a working solution, but
this is not the cleanest one. The risk is to involuntarily include
objects that are not intended to be exposed by the libbpf.
The headers needed to compile bpftool should in fact be "installed" from
libbpf, with its "install_headers" Makefile target. In addition, there
is one header which is internal to the library and not supposed to be
used by external applications, but that bpftool uses anyway.
Adjust the Makefile in order to install the header files properly before
compiling bpftool. Also copy the additional internal header file
(nlattr.h), but call it out explicitly. Build (and install headers) in a
subdirectory under bpftool/ instead of tools/lib/bpf/. When descending
from a parent Makefile, this is configurable by setting the OUTPUT,
LIBBPF_OUTPUT and LIBBPF_DESTDIR variables.
Also adjust the Makefile for BPF selftests, so as to reuse the (host)
libbpf compiled earlier and to avoid compiling a separate version of the
library just for bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-4-quentin@isovalent.com
Since commit 6c4fc209fc ("bpf: remove useless version check for prog
load") these "version" sections, which result in bpf_attr.kern_version
being set, have been unnecessary.
Remove them so that it's obvious to folks using selftests as a guide that
"modern" BPF progs don't need this section.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007231234.2223081-1-davemarchevsky@fb.com
VMs running on upstream 5.12+ kernel support LBR. However,
bpf_get_branch_snapshot couldn't stop the LBR before too many entries
are flushed. Skip the hit/waste test for VMs before we find a proper fix
for LBR in VM.
Fixes: 025bd7c753 ("selftests/bpf: Add test for bpf_get_branch_snapshot")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007050231.728496-1-songliubraving@fb.com
Replace deprecated bpf_{map,program}__next APIs with newly added
bpf_object__next_{map,program} APIs, so that no compilation warnings
emit.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-3-hengqi.chen@gmail.com
Currently the recursion test is hooking __htab_map_lookup_elem
function, which is invoked both from bpf_prog and bpf syscall.
But in our kernel build, the __htab_map_lookup_elem gets inlined
within the htab_map_lookup_elem, so it's not trigered and the
test fails.
Fixing this by using htab_map_delete_elem, which is not inlined
for bpf_prog calls (like htab_map_lookup_elem is) and is used
directly as pointer for map_delete_elem, so it won't disappear
by inlining.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/YVnfFTL/3T6jOwHI@krava
Add a test that validates that btf__add_btf() API is correctly copying
all the types from the source BTF into destination BTF object and
adjusts type IDs and string offsets properly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211006051107.17921-4-andrii@kernel.org
Next patch will need to reuse BTF generation logic, which tests every
supported BTF kind, for testing btf__add_btf() APIs. So restructure
existing selftests and make it as a single subtest that uses bulk
VALIDATE_RAW_BTF() macro for raw BTF dump checking.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211006051107.17921-3-andrii@kernel.org
Instead of unconditionally performing push/pop on %rax/%rdx in case of
division/modulo, we can save a few bytes in case of destination register
being either BPF r0 (%rax) or r3 (%rdx) since the result is written in
there anyway.
Also, we do not need to copy the source to %r11 unless the source is either
%rax, %rdx or an immediate.
For example, before the patch:
22: push %rax
23: push %rdx
24: mov %rsi,%r11
27: xor %edx,%edx
29: div %r11
2c: mov %rax,%r11
2f: pop %rdx
30: pop %rax
31: mov %r11,%rax
After:
22: push %rdx
23: xor %edx,%edx
25: div %rsi
28: pop %rdx
Signed-off-by: Jie Meng <jmeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211002035626.2041910-1-jmeng@fb.com
This adds selftests that tests the success and failure path for modules
kfuncs (in presence of invalid kfunc calls) for both libbpf and
gen_loader. It also adds a prog_test kfunc_btf_id_list so that we can
add module BTF ID set from bpf_testmod.
This also introduces a couple of test cases to verifier selftests for
validating whether we get an error or not depending on if invalid kfunc
call remains after elimination of unreachable instructions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-10-memxor@gmail.com
This commit allows specifying the base BTF for resolving btf id
lists/sets during link time in the resolve_btfids tool. The base BTF is
set to NULL if no path is passed. This allows resolving BTF ids for
module kernel objects.
Also, drop the --no-fail option, as it is only used in case .BTF_ids
section is not present, instead make no-fail the default mode. The long
option name is same as that of pahole.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-5-memxor@gmail.com
This patch adds support for testing the encap (ip6ip6) mode of IOAM.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.
$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1
Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
