The driver should goto label 'err' when failing at regmap_read().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220510153251.1741210-3-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Two minor changes to enable DMIC and capture for CS35L41, and one new
configuration for AlderLake hardware.
Some board revisions of the Framework Laptop have an ALC295 with a
disconnected or faulty headset mic presence detect.
The "dell-headset-multi" fixup addresses this issue, but also enables an
inoperative "Headphone Mic" input device whenever a headset is
connected.
Adding a new quirk chain specific to the Framework Laptop resolves this
issue. The one introduced here is based on the System76 "no headphone
mic" quirk chain.
The VID:PID f111:0001 have been allocated to Framework Computer for this
board revision.
Revision history:
- v2: Moved to a custom quirk chain to suppress the "Headphone Mic"
pincfg.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Link: https://lore.kernel.org/r/20220511010759.3554-1-dustin@howett.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The antient ISA wavefront driver reads its sample patch data (uploaded
over an ioctl) via __get_user() with no good reason; likely just for
some performance optimizations in the past. Let's change this to the
standard get_user() and the error check for handling the fault case
properly.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510103626.16635-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On i.MX8Plus there are two updates for micfil module.
One is that the output format is S32_LE, only the 24 more
significative bits have information, the other bits are always
zero. Add 'formats' variable in soc data to distinguish the
format on different platform.
Another is that the fifo depth is 32 entries.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1652087663-1908-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable capture stream of the cs35l41 dai link to support feedback
stream from amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170922.54868-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF topology supports 2 BE Links(dmic01 and dmic16k) and each
link supports up to four DMICs. However, Chromebook does not implement
ACPI NHLT table so the mach->mach_params.dmic_num is always zero. We
add a quirk so machine driver knows it's running on a Chromebook and
need to create BE Links for DMIC.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170922.54868-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for two rt1019 speaker amplifiers on
SSP1 and rt5682s on SSP0 for ADL platform
Reviewed-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Vamshi Krishna <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170922.54868-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ops are already part of the 'struct sdw_driver', it's unclear why
this was copied into the 'slave' structure - no other driver does so.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509185729.59884-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Before componentisation any part registered as a CODEC would have
automatically supported both little and big endian, ie. the core
would duplicate any supported LE or BE PCM format to support the other
endian as well. As componentisation removed the distinction between
CODEC drivers and platform drivers, a flag was added to specify
if this behaviour is required for a particular component. However,
as most systems tend to use little endian the absence of the flag
is rarely noticed. Also the naming of the flag "endianness" is a
little unobvious as to if it should be applied to a particular
component.
This series adds a comment to better explain the meaning of the
flag and then tidys up the usage of the flag. A couple of uses
of the flag are removed where is has been used inappropriately
on the CPU side of the DAI link, this is clearly not valid in the
cases it has been used, and I suspect never would be valid. Then
some redundant formats are removed, since they would be covered by
existing endianness flags. And finally a bunch of devices that are
missing the flag have it added.
It is worth noting that since componenisation there are now a couple
of cases where it is not entire clear to me that the flag should
be applied to all CODECs as it was before. In those cases I haven't
updated the driver to add the flag and they are outlined here:
1) Build into the AP CODECs, these are actual silicon inside the main
processor and they typically receive audio directly from an internal
bus. It is not obvious to me that these can happily ignore endian. On
the CODEC side these include: jz4725b.c, jz4760.c, jz4770.c,
rk3328_codec.c, lpass-va-macro.c, lpass-rx-macro.c, lpass-tx-macro.c,
lpass-wsa-macro.c. There are also some examples of this scattered
around the various platform support directories in sound/soc.
2) Devices behind non-audio buses, SPI just moves bits and doesn't
really define an endian for audio data on the bus. Thus it seems the
CODEC probably can care about the endian. The only devices that fall
into this group (mostly for AoV) are: rt5514-spi.c, rt5677-spi.c,
cros_ec_codec.c (only the AoV).
3) CODECs with no DAIs, these could specify the flag and plenty of
them do; CODECs from the initial conversion to componentisation. But
the flag makes no difference here since there is nothing for it to
apply to. This includes purely analogue CODECs: aw8738.c, ssm2305.c,
tpa6130a2.c, tda7419.c, max9759.c, max9768.c, max9877.c, lm4857.c,
simple-mux.c, simple-amplifier.c. And devices that only do jack
detection: ts3a227e.c, mt6359-accdet.c.
If there are any opinions on adding the flag to any of those three
groups they would be greatfully received. But I am leaning towards
leaving 1,2 without endianness flags since it feels inappropriate,
and removing the endian flag from devices in catagory 3 that already
have it. Assuming no one objects to that I will do a follow up
series for that.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The current IPC client infrastructure can only be used with IPC3.
This series carries updates for the core side of the client support to handle
IPC4 messages and updates the ipc message injector to be usable with IPC4.
The IPC flood test is only supported by SOF_IPC (IPC3), we are not going to
create the aux device for it at all if the firmware is using IPC4.
Regards,
Peter
---
Peter Ujfalusi (8):
ASoC: SOF: sof-client: Add API to get the maximum IPC payload size
ASoC: SOF: ipc-msg-injector: Query the maximum IPC payload size
ASoC: SOF: sof-client-probes: Query the maximum IPC payload size
ASoC: SOF: sof-client: Add API to get the ipc_type
ASoC: SOF: sof-client: Add support IPC4 message sending
ASoC: SOF: ipc-msg-injector: Separate the message sending
ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages
ASoC: SOF: sof-client: IPC flood test can only work with SOF_IPC
sound/soc/sof/sof-client-ipc-msg-injector.c | 181 ++++++++++++++++++--
sound/soc/sof/sof-client-probes.c | 5 +-
sound/soc/sof/sof-client.c | 66 ++++++-
sound/soc/sof/sof-client.h | 2 +
4 files changed, 227 insertions(+), 27 deletions(-)
--
2.36.0
Currently the dtrace only supported with SOF_IPC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220506130229.23354-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Log the error code when snd_soc_regster_card() fails, but fold in the
silencing of deferred probe errors.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220506130349.451452-1-broonie@kernel.org
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1639:32: warning: ‘mt8195_mt6359_max98390_rt5682_card’ defined but not used [-Wunused-variable]
1639 | static struct mt8195_card_data mt8195_mt6359_max98390_rt5682_card = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1634:32: warning: ‘mt8195_mt6359_rt1011_rt5682_card’ defined but not used [-Wunused-variable]
1634 | static struct mt8195_card_data mt8195_mt6359_rt1011_rt5682_card = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/mediatek/mt8195/mt8195-mt6359.c:1629:32: warning: ‘mt8195_mt6359_rt1019_rt5682_card’ defined but not used [-Wunused-variable]
1629 | static struct mt8195_card_data mt8195_mt6359_rt1019_rt5682_card = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Since all users of this driver do need CONFIG_OF anyway, there is no
need to save a few bytes on kernel builds while CONFIG_OF disabled, so
just remove the #ifdef to fix this warning.
Fixes: 86a6b9c9df ("ASoC: mediatek: mt8195: add machine support for max98390 and rt5682")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220509120918.9000-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds devicetree support to the wm8940 codec driver.
With a DT-based kernel, there is no board-specific setting
to select the driver so allow it to be manually chosen.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509121055.31103-1-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the ipc flood test is only supported with SOF_IPC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC message representation of an IPC4 differs from the IPC3 version
significantly.
The message for IPC4 should be written to the debugfs file in this form:
0-7 IPC4 header (2x u32)
8- additional payload, if any
The reply is given back in the same form.
The message size limitation is the same as with the IPC3, only messages
which can fit to the mailbox can be injected (and received).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move out the code for sending the IPC message into a separate helper
function in preparation for support for handling IPC4 communication.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to send an IPC4 message, the
sof_client_ipc_tx_message() needs to parse the tx message differently to
extract the size.
The IPC notification registration is done by providing the notification
type and the whole message is passed to the client when a match is found.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a way for the client drivers to query the ipc_type used by the
firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the SOF_IPC_MSG_MAX_SIZE as the maximum payload size for
and IPC message, use the provided API to query it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the SOF_IPC_MSG_MAX_SIZE as the maximum payload size for
and IPC message, use the provided API to query it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a way for the client drivers to query the maximum payload size of
an IPC message.
Currently clients do not have access to this information and they can only
use the SOF_IPC_MSG_MAX_SIZE defined value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-39-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-38-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-37-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-36-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-35-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-34-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-33-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-32-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-31-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SoundWire DAI and as such
should have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-30-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SLIMbus DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-29-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a SLIMbus DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-28-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. The i2s_rx component receives audio over an I2S DAI and as such
should have endianness applied.
A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-27-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported. It is worth noting this changes the behaviour of S24_LE to
use a word length of 24 rather than 32. This would appear to be a
correction since the fact S24_LE is stored as 32 bits should not be
presented over the bus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-26-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-25-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-24-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-23-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-22-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-21-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
As the core will now expand the formats to cover both endian types,
remove the redundant manual specification of both.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
As the core will now expand the formats to cover both endian types,
remove the redundant manual specification of both.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-19-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
As the core will now expand the formats to cover both endian types,
remove the redundant manual specification of both.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-18-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-17-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-16-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over a PDM DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an HDA DAI and as such should
have endianness applied.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC already provides the endianness flag on its
snd_soc_component_driver structure, specifying it is ambivalent
to endian. The core will expand the formats to cover both
endian types, as such remove the redundant specification of both
endians.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC already provides the endianness flag on its
snd_soc_component_driver structure, specifying it is ambivalent
to endian. The core will expand the formats to cover both
endian types, as such remove the redundant specification of both
endians.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC already provides the endianness flag on its
snd_soc_component_driver structure, specifying it is ambivalent
to endian. The core will expand the formats to cover both
endian types, as such remove the redundant specification of both
endians.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC already provides the endianness flag on its
snd_soc_component_driver structure, specifying it is ambivalent
to endian. The core will expand the formats to cover both
endian types, as such remove the redundant specification of both
endians.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC already provides the endianness flag on its
snd_soc_component_driver structure, specifying it is ambivalent
to endian. The core will expand the formats to cover both
endian types, as such remove the redundant specification of both
endians.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CODEC already provides the endianness flag on its
snd_soc_component_driver structure, specifying it is ambivalent
to endian. The core will expand the formats to cover both
endian types, as such remove the redundant specification of both
endians.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag should have been removed when the driver was
ported across from having both a CODEC and CPU side component, to
just having a CPU component and using the dummy for the CODEC. The
endianness flag is used to indicate that the device is completely
ambivalent to the endianness of the data, typically due to the
endianness being lost over the hardware link (ie. the link defines
bit ordering). It's usage didn't have any effect when the driver
had both a CPU and CODEC component, since the union of those equals
the CPU side settings, but now causes the driver to falsely report
it supports big endian. Correct this by removing the flag.
Fixes: 1dfdbe73cc ("ASoC: atmel-classd: remove codec component")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag should have been removed when the driver was
ported across from having both a CODEC and CPU side component, to
just having a CPU component and using the dummy for the CODEC. The
endianness flag is used to indicate that the device is completely
ambivalent to the endianness of the data, typically due to the
endianness being lost over the hardware link (ie. the link defines
bit ordering). It's usage didn't have any effect when the driver
had both a CPU and CODEC component, since the union of those equals
the CPU side settings, but now causes the driver to falsely report
it supports big endian. Correct this by removing the flag.
Fixes: f3c668074a ("ASoC: atmel-pdmic: remove codec component")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504170905.332415-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For Jack detection on CS42L42, detection is normally done using
"auto" mode, which automatically detects what type of jack is
connected to the device. However, some headsets are not
automatically detected, and as such and alternative detection
method "manual mode" can be used to detect these headsets.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://lore.kernel.org/r/20220504161236.2490532-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is to allow the hda driver to have access to the register names,
for improved maintainability.
Also ensure new header is aligned to 100 columns.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220504161236.2490532-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer kctl is being assigned a value that is not being read, buf
is being re-assigned later. The assignment is redundant and can be
removed.
Cleans up clang scan build warning:
sound/pci/rme9652/hdsp.c:3317:28: warning: Although the value stored
to 'kctl' is used in the enclosing expression, the value is never
actually read from 'kctl' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220508212819.59188-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver is currently using ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for
the Latitude 7520, but this fixup chain has some issues:
- The internal mic is really loud and the recorded audio is distorted
at "standard" audio levels.
- There are pop noises at system startup and when plugging/unplugging
headphone jacks.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215885
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Link: https://lore.kernel.org/r/20220501124237.4667-1-gabriele.mzt@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is not enabled, alc_shutup() is not needed,
so move it inside the #ifdef CONFIG_PM guard.
Also drop some contiguous #endif / #ifdef CONFIG_PM for simplicity.
Fixes this build warning:
sound/pci/hda/patch_realtek.c:886:20: warning: unused function 'alc_shutup'
Fixes: 08c189f2c5 ("ALSA: hda - Use generic parser codes for Realtek driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220430193318.29024-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device doesn't support reading the sample rate, so we need to apply
this quirk to avoid a 15-second delay waiting for three timeouts.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/20220504002444.114011-2-cyrozap@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmJqduYACgkQJNaLcl1U
h9BpLQf+Il8MGBeIsS5j4WVqOeoQLaptRQKWSTtLm7HJIs0Npbc8eulArMea7OrH
gYB0EGhIPowkVWy2SdPv6QVH8U9DlokF22Y3W/DVjaZzYqAN4mWHcWEeGdGVDH4i
gvjny3lXaoSKHyDUGNyomo1JbF1g7hBCT9Ph30Kcq6h62BVjcZzOmcu2xSN4RCEi
OmA0XF7jfubXqCZqoXuxrCcltSpFhz2zmqq7ieR1Kog5YWgNWWGUjns+U4dpkdVI
iGtmOO5v/umGWTc/zXsNBLBiG3mQV8G7+OI7SkgaylFhuNcUoiu6bAt0m+meFroM
d8Wj9wwizxHuzuF16hwJYPacR4KTvg==
=FTRS
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The series adds the basic IPC4 message handling code, implementing the ipc
callbacks.
Due to the difference between IPC3 and IPC4 messaging we need to introduce new
message container for IPC4, but the SOF internal callbacks and structures can be
kept as they were and leaving it for the IPC specific code to handle the
differences.
The series provides the foundation for both lowe level (sound/soc/sof/intel) and
high level IPC4 implementation (topologies, firmware loading, control handling,
etc).
Instead of custom data type re-use generic struct u16_fract.
No changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220502120455.84386-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set DMA type for ti-bcdma controller for AM62-SK.
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20220505111226.29217-1-j-luthra@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the initial and mandatory IPC ops support for IPC4 to enable
IPC communication with this new IPC protocol.
This patch implements the following ops:
tx_msg, rx_msg, set_get_data and get_reply.
Co-developed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220505094818.10346-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rx_data pointer can be used by IPC implementations to pass the received
message (or part of the message, like the header) from platform code to
generic, high level IPC code.
IPC4 is going to be the first user of this as its implementation on Intel
platforms detaches the header and payload and the rx cannot be handled in
a similar way as it is implemented for ipc3.
If the rx_data is dynamically allocated, it is up to the platform code to
free it up.
After the message reception handling (rx_msg ops) returned, the pointer via
the msg->rx_data should be considered as invalid.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220505094818.10346-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not disable the boost converter during probe. The silicon
contains functional default tunings so the boost converter can
be left at the chip default enabled state.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504134458.283780-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_dmaengine_pcm_register() can be passed a NULL pointer for the config
which means that the we have to test for pcm->config being non NULL
before accessing it. Make the code more straight forward by providing a
default config when none is passed. With this pcm->config is never NULL
and we can skip all the if (pcm->config) tests.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220502131335.2604158-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Only the main IPC ops struct should be visible outside of IPC3 code to make
sure that the code is correctly abstracted.
Instead of keeping the ipc3-ops.h with only the high level ops struct
declaration, put the ipc3_ops to sof-priv.h and move all other ops struct
declaration into ipc3-priv.h
New IPC implementation should follow this route: the main IPC ops should be
declared in sof-priv.h and no other IPC version related header be used
for generic code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220504102831.10071-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220501171009.45060-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.
Fixes: c32759035a ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During probe, determine if the chip is in fact an ADAU1761
even though an ADAU1361 is specified, and perform additional
operations to enable the ADAU1761 to behave as an ADAU1361,
i.e. disregarding the DSP and setting up routing and PM
transparently.
This enables either chip to be mounted when an ADAU1361 is specified.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204281841290.5574@lnxricardw1.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is possible to craft a topology where sof_get_control_data() would do
out of bounds access because it expects that it is only called when the
payload is bytes type.
Confusingly it also handles other types of controls, but the payload
parsing implementation is only valid for bytes.
Fix the code to count the non bytes controls and instead of storing a
pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
store the pointer to the data itself and add a new member to save the size
of the data.
In case of non bytes controls we store the pointer to the chanv itself,
which is just an array of values at the end.
In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check
against NULL since it is incorrect and invalid in this context.
The data is pointing to the end of cdata struct, so it should never be
null.
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20220427185221.28928-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220428162444.3883147-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.
When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous fix for event generation for custom controls compared the
value already in the register with the value being written, missing the
logic that only applies the value to the register when the control is
already enabled. Fix this, compare the value cached in the driver data
rather than the register.
This should really be an autodisable control rather than open coded.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428113221.15326-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series includes last few remaining miscellaneous patches to prepare
for the introduction of new IPC version, IPC4, in the SOF driver. The changes
include new IPC ops for topology parsing to set up the volume table, prepare
the widgets for set up and free the routes. The remaining patches introduce
new fields in the existing data structures for use in IPC4 and align the flows
for widget/route set up so that they are common for both IPC3 and IPC4.
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series introduces IPC abstraction for FW loading in the SOF driver
in preparation for supporting the new IPC version in the SOF firmware.
Fix the missing pci_release_regions() before return
from sof_pci_probe() in the error handling case.
Fixes: 4bfbbb76e8 ("ASOC: SOF: pci: add ipc_type override for Intel IPC4 tests")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426132539.416676-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Execute the firmware information query on the first boot if it is
available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_parse_module_memcpy() is no longer used and we have the
implementation of it in ipc3-loader.c which is a default mode to load
module(s) with IPC3 if the snd_sof_load_firmware_memcpy() is used for
loading the firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.
No need to set the callback for this platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.
No need to set the callback for these platforms.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.
No need to set the callback for iMX.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.
No need to set the callback for this platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we have the fw_loader ops implementation for IPC3, we can start
using it and remove most of the IPC dependent code from the file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the IPC3 dependent implementation of validating the firmware image,
parsing the ext manifest and to load modules via memcpy.
The code introduced by this commit is the IPC dependent code from the
loader.c, which is going to be removed later.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parsing and loading of firmware modules/components are IPC dependent
operations as the organization of the firmware depends on the IPC it is
supporting.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to set up a pipeline with IPC4, the total memory usage for the
pipeline needs to be calculated based on the list of connected widgets.
Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be
used to calculate the memory usage for each widget in the pipelines
associated with a PCM and prepare the widget for getting set up in the
DSP. The prepare step will be used to allocate memory for the IPC
payload, assign instance ID and update the config data for the widget
based on the runtime PCM params. Once prepared, the setup step is used
to send the IPC to create the widget in the DSP.
Add an ipc_unprepare() op to unprepare the widget i.e free the memory
allocated during prepare, free the instance ID etc. This should be
invoked after the widget is freed.
A new flag "prepared" is added to struct snd_sof_widget to track the
prepared status of widgets.
Also, IPC4 requires the platform_params and the runtime PCM params in
order to prepare a widget for set up. So modify the signature of
sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept
these as arguments.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the complete flag is used only for the snd_soc_dapm_scheduler
type widgets to indicate that the pipeline has been set up. All other
widgets do not need it. Add a comment to clarify its usage and set the
complete flag to false only for the scheduler widget in
sof_widget_free().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not parse these tokens if they are not defined in the IPC version
specific token list. In the case of IPC4 with HDA topologies for
example, no DAI link specific tokens need to be added in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_pcm_setup_connected_widgets() can be a static function in pcm.c. No
need to declare it in the header.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two new fields, instance_id and module_info to struct
snd_sof_widget. instance_id for widgets will be assigned when they are
set up in the DSP and reset when the widgets are freed. module_info is
used to save information the firmware provides about each module in its
manifest.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IPC4 requires that the widgets be unbound in the firmware before they
are freed. So add a new op in struct sof_ipc_tplg_ops that will be used
to send the IPC to the firmware to unbind widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the mixer_to_ipc() and ipc_to_mixer() functions for reuse in
IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
IPC4 requires the platform_params be passed when invoking
sof_pcm_setup_connected_widgets(). So move the call to
snd_sof_pcm_platform_hw_params() before calling
sof_pcm_setup_connected_widgets(). This has no functional impact.
sof_pcm_setup_connected_widgets will be modified in the follow up
patches to accept the platform params as an argument.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For IPC3, the order of setting up the widgets associated with a PCM
doesn't matter. But for IPC4, widgets must be set up from the source to
the sink in order. In order to accommodate this, change the
sof_widget_list_setup/free() functions to set up/free widgets starting
with the source widget all the way to the sink widget for all pipelines.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is in preparation for IPC4 which requires that the route be reset
before the widget is freed. For IPC3, there is nothing more to be done
other than setting the route status. So it is OK to be moved before the
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new op set_up_volume_table for control IPC ops. Define and set
the op for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.
Fixes: c32759035a ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HID made of either Wolfson/CirrusLogic PCI ID + 8960 identifier
This helps enumerate the Waveshare WM8960 WM8960 Hi-Fi Sound
Card HAT on the Up2 platform.
The scripts at https://github.com/thesofproject/acpi-scripts
can be used to add the ACPI initrd overlay.
This commit is similar to the commit:
960cdd50ca ("ASoC: wm8804: Add ACPI support")
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220427212916.40145-1-nick83ola@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DMA channels requested by rz_ssi_dma_request() in rz_ssi_probe() were
never released in the error path apart from one place. This patch fixes
this issue by calling rz_ssi_release_dma_channels() in the error path.
Fixes: 26ac471c53 ("ASoC: sh: rz-ssi: Add SSI DMAC support")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220426074922.13319-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Propagate error codes returned from platform_get_irq_byname() instead of
returning -ENODEV. platform_get_irq_byname() may return -EPROBE_DEFER, to
handle such cases propagate the error codes.
While at it drop the dev_err_probe() messages as platform_get_irq_byname()
already does this for us in case of error.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220426074922.13319-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mask values of SSIFSR_TDC and SSIFSR_RDC macros are incorrect and
they are unused in the file so just drop them.
Reported-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220426074922.13319-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ld: sound/soc/sof/mediatek/mt8186/mt8186-clk.o:(.opd+0x18): multiple
definition of `adsp_clock_on';
sound/soc/sof/mediatek/mt8195/mt8195-clk.o:(.opd+0x60): first defined
here
ld: sound/soc/sof/mediatek/mt8186/mt8186-clk.o: in function
`.adsp_clock_on':
ld: sound/soc/sof/mediatek/mt8186/mt8186-clk.o:(.opd+0x30): multiple
definition of `adsp_clock_off';
sound/soc/sof/mediatek/mt8195/mt8195-clk.o:(.opd+0x78): first defined
here
ld: sound/soc/sof/mediatek/mt8186/mt8186-clk.o: in function
`.adsp_clock_off':
ld: sound/soc/sof/mediatek/mt8186/mt8186-loader.o:(.opd+0x0): multiple
definition of `sof_hifixdsp_boot_sequence';
sound/soc/sof/mediatek/mt8195/mt8195-loader.o:(.opd+0x0): first defined
here
ld: sound/soc/sof/mediatek/mt8186/mt8186-loader.o: in function
`.sof_hifixdsp_boot_sequence':
ld: sound/soc/sof/mediatek/mt8186/mt8186-loader.o:(.opd+0x18): multiple
definition of `sof_hifixdsp_shutdown';
sound/soc/sof/mediatek/mt8195/mt8195-loader.o:(.opd+0x18): first defined
here
ld: sound/soc/sof/mediatek/mt8186/mt8186-loader.o: in function
`.sof_hifixdsp_shutdown':
Fixes: 570c14dc92 ("ASoC: SOF: mediatek: Add mt8186 sof fw loader and
dsp ops")
Fixes: 210b3ab932 ("ASoC: SOF: mediatek: Add mt8186 dsp clock support")
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Link: https://lore.kernel.org/r/20220427071030.10172-1-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With previous patch this allows for building driver on architectures
without ACPI support present, when building with COMPILE_TEST enabled.
Fixes: 47a1886a61 ("ASoC: Intel: avs: Enable AVS driver only on x86 platforms")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220426200539.894010-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC message sending can take longer than the default 500ms during
system boot up due to the concurrent loading of different drivers.
Increase the IPC timeout to 1 second to avoid timeout errors due to
Linux load and scheduling.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183459.102251-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cl_dsp_init() returns 0 on success or negative errno on error.
Replace the 'if (ret >= 0)' checks with correct 'if (!ret)` to check for
success.
Fixes: 2a68ff8461 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220427115159.26177-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_sync() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183807.102442-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_noidle() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426184106.102636-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_noidle() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426184106.102636-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and
pm_runtime_put_noidle() pattern.
No functional changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426184106.102636-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This function returns zero unconditionally, so there isn't any benefit
of returning a value. Make it return void to be able to see at a glance
that the return value of pcm1789_i2c_remove() is always zero.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220425193023.61046-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Update machine driver startup, shutdown callback functions to avoid
sound card registration failure on other platforms.
Without this change, platforms with WCD codec is failing to register
sound card.
Fixes: c5198db82d ("ASoC: qcom: Add driver support for ALC5682I-VS")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1650374329-7279-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series of patches adds support for Analog Devices MAX98396
mono amplifier with IV sense. The device provides a PCM interface
for audio data and a standard I2C interface for control data
communication. This driver also supports MAX98397 which is
a variant of MAX98396 with wide input supply range.
Signed-off-by: Ryan Lee <ryan.lee.analog@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220423021558.1773598-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only effect of returning an error code in an i2c remove callback
(compared to returning zero) is that the i2c core emits a generic
warning. The device is still removed.
So even if disabling the regulators fails it's sensible to return zero
to suppress the additional generic and little helpful error message.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220425193206.61710-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The SOF CI and daily tests exposed a number of issues with corner
cases on platforms using the HDaudio DAI, such as UpExtreme boards or
usual HDaudio+DMIC laptops.
This patchset provides improvements for pause_push/pause_release,
suspend-resume, mixing use cases and combinations of all three.
The initial patches provide a cleanup, the last patches improve the
state machine and DMA handling.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The firmware ready (fw_ready) message is sent by the firmware to notify the host
that it has been booted up and caries additional information about it's
configuration.
All of this is IPC specific, the message itself is IPC version specific and the
information itself also.
Move the code to handle the fw_ready message under ipc3.c since the parsing and
interpretation is IPC specific.
A followup series is going to take care of the rest of the loader.c to make it
IPC agnostic.
Merge series from Stephen Kitt <steve@sk2.org>:
This series covers all the remaining changes to migrate
sound/soc/codecs i2c probes to probe_new, where the const struct
i2c_client * argument is still used. Instead of relying on the
parameter passed in, i2c_match_id is used instead.
With this set of patches, all the sound/soc/codecs i2c probes use the
new probe definition.
Changes since v1: two missing files were added.
Stephen Kitt (7):
ASoC: ak*: use i2c_match_id and simple i2c probe
ASoC: alc56*: use i2c_match_id and simple i2c probe
ASoC: max980*: use i2c_match_id and simple i2c probe
ASoC: pcm186x: use i2c_match_id and simple i2c probe
ASoC: tas*: use i2c_match_id and simple i2c probe
ASoC: tlv320*: use i2c_match_id and simple i2c probe
ASoC: tpa6130: use i2c_match_id and simple i2c probe
sound/soc/codecs/ak4613.c | 10 +++++----
sound/soc/codecs/ak4642.c | 8 ++++---
sound/soc/codecs/alc5623.c | 24 +++++++++++----------
sound/soc/codecs/alc5632.c | 20 +++++++++--------
sound/soc/codecs/max98088.c | 21 +++++++++---------
sound/soc/codecs/max98090.c | 23 ++++++++++----------
sound/soc/codecs/max98095.c | 19 +++++++++--------
sound/soc/codecs/pcm186x-i2c.c | 24 ++++++++++-----------
sound/soc/codecs/tas2562.c | 25 +++++++++++-----------
sound/soc/codecs/tas571x.c | 11 ++++++----
sound/soc/codecs/tas5720.c | 21 +++++++++---------
sound/soc/codecs/tlv320adc3xxx.c | 21 +++++++++---------
sound/soc/codecs/tlv320aic31xx.c | 32 ++++++++++++++--------------
sound/soc/codecs/tlv320aic32x4-i2c.c | 11 ++++++----
sound/soc/codecs/tlv320aic3x-i2c.c | 25 +++++++++++-----------
sound/soc/codecs/tpa6130a2.c | 19 +++++++++--------
16 files changed, 168 insertions(+), 146 deletions(-)
base-commit: 5d763a740e5b24e4a2ca04317255e7e941876338
--
2.27.0
Add support of SOF on Mediatek mt8186 SoC.
MT8186 has 2 Cortex A76 cores paired with 6 Cortex A55 cores.
It also has Cadence HiFi-5 DSP single core. The IPC communication
between AP and DSP is based on shared DRAM and mailbox interrupt.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220422055659.8738-2-tinghan.shen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220414085310.2541546-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420030246.2575629-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Both MCLK and BCLK can be the clock source of sysclk via PLL
according to its datasheet.
This patch sets MCLK as the clock source as we use MCLK in the
previous projects.
Fixes: c5198db82d ("ASoC: qcom: Add driver support for ALC5682I-VS")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Link: https://lore.kernel.org/r/20220419062952.356017-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to enable NHLT support one must select SND_INTEL_DSP_CONFIG,
which will select SND_INTEL_NHLT. Otherwise the file containing NHLT
code doesn't get build leading to errors when linking.
Fixes: 274d79e518 ("ASoC: Intel: avs: Configure modules according to their type")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220425091646.545216-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Only supported platform for AVS are x86 machines, so there is no reason
for it to be enabled on other architectures. Allow exception for compile
tests.
Fixes: 274d79e518 ("ASoC: Intel: avs: Configure modules according to their type")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220425091646.545216-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420030439.2575817-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220419110718.2574674-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSI block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so
instead of adding dependency for each SoC's add dependency on ARCH_RZG2L.
The ARCH_RZG2L config option is already selected by ARCH_R9A07G043,
ARCH_R9A07G044 and ARCH_R9A07G054.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220423164443.146299-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220420030402.2575755-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-7-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-5-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-4-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-3-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-2-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3, we can remove the old code
from the loader.c along with the functions only used by the fw_ready()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3, the callback no longer in
use and it is going to be removed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The handling of fw_ready is IPC3 specific, move the needed code from the
loader.c to ipc3.c and stop using the sof_ops(sdev)->fw_ready() callback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Once we've set-up the HDA stream and its format, we currently don't
support additional format changes. We already have a protection in the
.prepare case, but this needs to be added in the hw_params too.
In mixing use cases where two DPCM FEs are connected to the same BE,
if can happen that there are multiple calls to the BE hw_params when
the two FEs are configured simultaneously.
This could alternatively be fixed at the DPCM level but that's a more
intrusive change requiring infrastructure changes: this would need to
be paired with the definition of fixed hw_params at the mixer level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do the same operations from different places, add a helper to
enforce consistency and make the programming sequences clearer.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequences are missing a call to snd_soc_dai_set_dma_data() when
the stream is cleared, as well as a release of the stream, and tests
to avoid pointer dereferences.
This fixes an underflow issue in a corner case with two streams paused
before a suspend-resume cycle. After resume, the pause_release of the
last stream causes an underflow due to an invalid sequence.
This problem probably existed since the beginning and is only see with
prototypes of a 'deep-buffer' capability, which depends on additional
ASoC fixes, so there's is no Fixes: tag and no real requirement to
backport this patch.
BugLink: https://github.com/thesofproject/linux/issues/3151
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comments and re-align with the TRIGGER_SUSPEND case with an
additional call to hda_dai_hw_free_ipc() to free-up resources.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The location of the code was not optimal and prevents us from using
helpers, let's move it to hda-dai.c.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do the same thing from different places, let's use a helper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before suspending, walk through all the widgets to make sure all
refcounts are zero. If not, the resume will not work and random errors
will be reported. Adding this paranoia check will help identify leaks
and broken sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just code move with no functionality change, to clearly separate out
the 'dai' operation from the link DMA ones.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link DMA state management is handled completely on the host side,
while the DAI operations require an IPC. Split the first part in
dedicated helpers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper instead of open-coding the same thing multiple times.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the argument "struct sof_intel_hda_stream *hda_stream" is not used, remove.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Intel documentation refers to the concepts of 'HDAudio host
DMA' (system memory <--> DSP) and 'HDaudio link DMA' (DSP <-->
peripherals). We currently use the prefix 'hda_link' to describe DAI
operations, which can be confused for dailink operations.
Since the topology tokens refer unambiguously to the 'HDA' dai, let's
drop the link prefix for dai-related ops/callbacks. Conversely let's
use 'hda_link_dma' for routines related to the DMA management. In a
follow-up patch we will introduce the 'hda_dai_link' prefix for dailink
ops/callbacks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BE DAI driver ops involve operations that are IPC-specific. For ex:
for the HDA DAI, the trigger op involves sending the DAI_CONFIG IPC to
the DSP to stop the DMA for the stop/pause commands. This sequence is
different for IPC3 and IPC4. So, make the dai driver ops IPC-specific
and set the IPC3-specific ops during the ops_init() callback.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system is suspended while a PCM is paused, it doesn't receive
the SUSPEND trigger. So, the SOF driver has to ensure that the PCM and
the widgets associated with the paused PCM are freed in the firmware
during suspend. This is handled in the
sof_tear_down_left_over_pipelines() call. But since the state of this
PCM is SUSPENDED, we end up clearing the prepared flag for the PCM
before freeing it. This results in IPC errors while freeing the widgets.
But because the widget use_counts are reset to 0 even though the IPC
fails, releasing the paused stream after resuming from suspend proceeds
normally.
Fix the IPC errors by removing the clearing of the prepared flag in
sof_set_hw_params_upon_resume(). In fact, we can remove the
sof_set_hw_params_upon_resume() and call
snd_sof_dsp_hw_params_upon_resume() directly. This will ensure that the
PCM is freed in the firmware before the IPC's for freeing the widgets
are sent.
BugLink: https://github.com/thesofproject/linux/issues/3543
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As pointed out by Sascha Hauer, this patch changes:
if (pmc->config && !pcm->config->prepare_slave_config)
<do nothing>
to:
if (pmc->config && !pcm->config->prepare_slave_config)
snd_dmaengine_pcm_prepare_slave_config()
This breaks the drivers that do not need a call to
dmaengine_slave_config(). Drivers that still need to call
snd_dmaengine_pcm_prepare_slave_config(), but have a NULL
pcm->config->prepare_slave_config should use
snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config
callback.
Fixes: 9a1e13440a ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since a pointer to struct snd_dmaengine_pcm_config is passed,
snd_dmaengine_pcm_prepare_slave_config() is no longer called unless it's
explicitly set in prepare_slave_config.
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Suggested-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA fireworks driver has a bug in its initial state to return count
shorter than expected by 4 bytes to userspace applications when handling
response frame for Echo Audio Fireworks transaction. It's due to missing
addition of the size for the type of event in ALSA firewire stack.
Fixes: 555e8a8f7f ("ALSA: fireworks: Add command/response functionality into hwdep interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220424102428.21109-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo Yoga Duet 7 13ITL6 has Realtek ALC287 and built-in
speakers do not work out of the box. The fix developed for
Yoga 7i 14ITL5 also enables speaker output for this model.
Signed-off-by: Zihao Wang <wzhd@ustc.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220424084120.74125-1-wzhd@ustc.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer substream is being dereferenced on the assignment of pointer card
before substream is being null checked with the macro PCM_RUNTIME_CHECK.
Although PCM_RUNTIME_CHECK calls BUG_ON, it still is useful to perform the
the pointer check before card is assigned.
Fixes: d4cfb30fce ("ALSA: pcm: Set per-card upper limit of PCM buffer allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220424205945.1372247-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add two PCI IDs and quirks for APL Chromebooks and Intel IPC4
selection for developers.
cppcheck throws the following warning:
sound/soc/soc-core.c:2773:6: style: Condition '!num_widgets' is always
false [knownConditionTrueFalse]
if (!num_widgets) {
^
sound/soc/soc-core.c:2761:18: note: Assuming that condition
'num_widgets<0' is not redundant
if (num_widgets < 0) {
^
sound/soc/soc-core.c:2766:18: note: Assuming condition is false
if (num_widgets & 1) {
^
sound/soc/soc-core.c:2772:2: note: Compound assignment '/=', assigned
value is 0
num_widgets /= 2;
^
We should check upfront all error conditions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162505.302132-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequence for IMR boot is essentially the same as normal boot with the
difference that instead of DMA from host the firmware is loaded from IMR.
Re-structure the code to use the existing sequence and also add fallback
handling in case the IMR boot fails.
Introduce a new flag to make the IMR boot support check simpler.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421202031.1548362-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code does an init/free for each piece of information
needed. We can instead initialize the NHLT table in the .probe() and
free it in the .remove() callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421201946.1547041-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'w' (struct snd_soc_dapm_widget) is not changing within the function,
there is no reason to check the w->sname more than once as it is not
going to change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421201847.1545686-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to assign spcm to NULL. Removing this assignment also
removes a false alarm reported by cppcheck.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162600.302230-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Raptor Lake P.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Alder Lake PS.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Muralidhar Reddy <muralidhar.reddy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a kernel module parameter for select the non-default IPC type.
This should only be used by developers with access to firmware and
topology files, typically Intel and partners.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As suggested by MrChromebox, the SOF driver can be used with the SOF
firmware binary signed with the production key. This patch adds an
additional check for the ApolloLake SoC before modifying the default
firmware path.
Note that ApolloLake Chromebooks officially ship with the Skylake
driver, so to use SOF the users have to explicitly opt-in with
'options intel-dspcfg dsp_driver=3'. There is no plan to change the
default selection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On HP Laptops, requires the same ALC285_FIXUP_HP_GPIO_LED quirk to
make its audio LEDs work.
So apply the quirk, and make it the last one since it's an LED quirk.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Fixes: 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
Link: https://lore.kernel.org/r/20220422090845.230071-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>