* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits)
microblaze: Disable heartbeat/enable emaclite in defconfigs
microblaze: Support simpleImage.dts make target
microblaze: Fix _start symbol to physical address
microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections
microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets
microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C
microblaze: Actually show KiB rather than pages in "Freeing initrd memory:"
microblaze: Support ptrace syscall tracing.
microblaze: Updated CPU version and FPGA family codes in PVR
microblaze: Generate correct signal and siginfo for integer div-by-zero
microblaze: Don't be noisy when userspace causes hardware exceptions
microblaze: Remove ipc.h file which points to non-existing asm-generic file
microblaze: Clear sticky FSR register after generating exception signals
microblaze: Ensure CPU usermode is set on new userspace processes
microblaze: Use correct kbuild variable KBUILD_CFLAGS
microblaze: Save and restore msr in hw exception
microblaze: Add architectural support for USB EHCI host controllers
microblaze: Implement include/asm/syscall.h.
microblaze: Improve checking mechanism for MSR instruction
microblaze: Add checking mechanism for MSR instruction
...
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
module: don't call percpu_modfree on NULL pointer.
module: fix memory leak when load fails after srcversion/version allocated
module: preferred way to use MODULE_AUTHOR
param: allow whitespace as kernel parameter separator
module: reduce string table for loaded modules (v2)
module: reduce symbol table for loaded modules (v2)
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
lsm: Use a compressed IPv6 string format in audit events
Audit: send signal info if selinux is disabled
Audit: rearrange audit_context to save 16 bytes per struct
Audit: reorganize struct audit_watch to save 8 bytes
The general one handles NULL, the static obsolescent
(CONFIG_HAVE_LEGACY_PER_CPU_AREA) one in module.c doesn't; Eric's
commit 720eba31 assumed it did, and various frobbings since then kept
that assumption.
All other callers in module.c all protect it with an if; this effectively
does the same as free_init is only goto if we fail percpu_modalloc().
Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Normally the twisty paths of sysfs will free the attributes, but not if
we fail before we hook it into sysfs (which is the last thing we do in
load_module).
(This sysfs code is a turd, no doubt there are other issues lurking too).
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Some boot mechanisms require that kernel parameters are stored in a
separate file which is loaded to memory without further processing
(e.g. the "Load from FTP" method on s390). When such a file contains
newline characters, the kernel parameter preceding the newline might
not be correctly parsed (due to the newline being stuck to the end of
the actual parameter value) which can lead to boot failures.
This patch improves kernel command line usability in such a situation
by allowing generic whitespace characters as separators between kernel
parameters.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also remove all parts of the string table (referenced by the symbol
table) that are not needed for kallsyms use (i.e. which were only
referenced by symbols discarded by the previous patch, or not
referenced at all for whatever reason).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Discard all symbols not interesting for kallsyms use: absolute,
section, and in the common case (!KALLSYMS_ALL) data ones.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
HWPOISON: Enable error_remove_page on btrfs
HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
HWPOISON: Add madvise() based injector for hardware poisoned pages v4
HWPOISON: Enable error_remove_page for NFS
HWPOISON: Enable .remove_error_page for migration aware file systems
HWPOISON: The high level memory error handler in the VM v7
HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
HWPOISON: shmem: call set_page_dirty() with locked page
HWPOISON: Define a new error_remove_page address space op for async truncation
HWPOISON: Add invalidate_inode_page
HWPOISON: Refactor truncate to allow direct truncating of page v2
HWPOISON: check and isolate corrupted free pages v2
HWPOISON: Handle hardware poisoned pages in try_to_unmap
HWPOISON: Use bitmask/action code for try_to_unmap behaviour
HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
HWPOISON: Add poison check to page fault handling
HWPOISON: Add basic support for poisoned pages in fault handler v3
HWPOISON: Add new SIGBUS error codes for hardware poison signals
HWPOISON: Add support for poison swap entries v2
HWPOISON: Export some rmap vma locking to outside world
...
Because the binfmt is not different between threads in the same process,
it can be moved from task_struct to mm_struct. And binfmt moudle is
handled per mm_struct instead of task_struct.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CLONE_PARENT was used to implement an older threading model. For
consistency with the CLONE_THREAD check in copy_pid_ns(), disable
CLONE_PARENT with CLONE_NEWPID, at least until the required semantics of
pid namespaces are clear.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When global or container-init processes use CLONE_PARENT, they create a
multi-rooted process tree. Besides siblings of global init remain as
zombies on exit since they are not reaped by their parent (swapper). So
prevent global and container-inits from creating siblings.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Oren Laadan <orenl@cs.columbia.edu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__fatal_signal_pending inlines to one instruction on x86, probably two
instructions on other machines. It takes two longer x86 instructions just
to call it and test its return value, not to mention the function itself.
On my random x86_64 config, this saved 70 bytes of text (59 of those being
__fatal_signal_pending itself).
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce do_send_sig_info() and convert group_send_sig_info(),
send_sig_info(), do_send_specific() to use this helper.
Hopefully it will have more users soon, it allows to specify
specific/group behaviour via "bool group" argument.
Shaves 80 bytes from .text.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce core pipe limiting sysctl.
Since we can dump cores to pipe, rather than directly to the filesystem,
we create a condition in which a user can create a very high load on the
system simply by running bad applications.
If the pipe reader specified in core_pattern is poorly written, we can
have lots of ourstandig resources and processes in the system.
This sysctl introduces an ability to limit that resource consumption.
core_pipe_limit defines how many in-flight dumps may be run in parallel,
dumps beyond this value are skipped and a note is made in the kernel log.
A special value of 0 in core_pipe_limit denotes unlimited core dumps may
be handled (this is the default value).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Earl Chew <earl_chew@agilent.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This changes tracehook_notify_jctl() so it's called with the siglock held,
and changes its argument and return value definition. These clean-ups
make it a better fit for what new tracing hooks need to check.
Tracing needs the siglock here, held from the time TASK_STOPPED was set,
to avoid potential SIGCONT races if it wants to allow any blocking in its
tracing hooks.
This also folds the finish_stop() function into its caller
do_signal_stop(). The function is short, called only once and only
unconditionally. It aids readability to fold it in.
[oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state]
[oleg@redhat.com: introduce tracehook_finish_jctl() helper]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current behaviour of sys_waitid() looks odd. If user passes infop ==
NULL, sys_waitid() returns success. When user additionally specifies flag
WNOWAIT, sys_waitid() returns -EFAULT on the same conditions. When user
combines WNOWAIT with WCONTINUED, sys_waitid() again returns success.
This patch adds check for ->wo_info in wait_noreap_copyout().
User-visible change: starting from this commit, sys_waitid() always checks
infop != NULL and does not fail if it is NULL.
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_wait() checks ->wo_info to figure out who is the caller. If it's not
NULL the caller should be sys_waitid(), in that case do_wait() fixes up
the retval or zeros ->wo_info, depending on retval from underlying
function.
This is bug: user can pass ->wo_info == NULL and sys_waitid() will return
incorrect value.
man 2 waitid says:
waitid(): returns 0 on success
Test-case:
int main(void)
{
if (fork())
assert(waitid(P_ALL, 0, NULL, WEXITED) == 0);
return 0;
}
Result:
Assertion `waitid(P_ALL, 0, ((void *)0), 4) == 0' failed.
Move that code to sys_waitid().
User-visible change: sys_waitid() will return 0 on success, either
infop is set or not.
Note, there's another bug in wait_noreap_copyout() which affects
return value of sys_waitid(). It will be fixed in next patch.
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
task_pid_type() is only used by eligible_pid() which has to check wo_type
!= PIDTYPE_MAX anyway. Remove this check from task_pid_type() and factor
out ->pids[type] access, this shrinks .text a bit and simplifies the code.
The matches the behaviour of other similar helpers, say get_task_pid().
The caller must ensure that pid_type is valid, not the callee.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
child_wait_callback()->eligible_child() is not right, we can miss the
wakeup if the task was detached before __wake_up_parent() and the caller
of do_wait() didn't use __WALL.
Move ->wo_pid checks from eligible_child() to the new helper,
eligible_pid(), and change child_wait_callback() to use it instead of
eligible_child().
Note: actually I think it would be better to fix the __WCLONE check in
eligible_child(), it doesn't look exactly right. But it is not clear what
is the supposed behaviour, and any change is user-visible.
Reported-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested by Roland.
do_wait(__WNOTHREAD) can only succeed if the caller is either ptracer, or
it is ->real_parent and the child is not traced. IOW, caller == p->parent
otherwise we should not wake up.
Change child_wait_callback() to check this. Ratan reports the workload with
CPU load >99% caused by unnecessary wakeups, should be fixed by this patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ratan Nalumasu reported that in a process with many threads doing
unnecessary wakeups. Every waiting thread in the process wakes up to loop
through the children and see that the only ones it cares about are still
not ready.
Now that we have struct wait_opts we can change do_wait/__wake_up_parent
to use filtered wakeups.
We can make child_wait_callback() more clever later, right now it only
checks eligible_child().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Preparation, no functional changes.
eligible_child() has a single caller, wait_consider_task(). We can move
security_task_wait() out from eligible_child(), this allows us to use it
for filtered wake_up().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The bug is old, it wasn't cause by recent changes.
Test case:
static void *tfunc(void *arg)
{
int pid = (long)arg;
assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0);
kill(pid, SIGKILL);
sleep(1);
return NULL;
}
int main(void)
{
pthread_t th;
long pid = fork();
if (!pid)
pause();
signal(SIGCHLD, SIG_IGN);
assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0);
int r = waitpid(-1, NULL, __WNOTHREAD);
printf("waitpid: %d %m\n", r);
return 0;
}
Before the patch this program hangs, after this patch waitpid() correctly
fails with errno == -ECHILD.
The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its
->real_parent is our sub-thread and we ignore SIGCHLD. But in this case
we should wake up other threads which can sleep in do_wait().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Organize cgroups over soft limit in a RB-Tree
Introduce an RB-Tree for storing memory cgroups that are over their soft
limit. The overall goal is to
1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded.
We are careful about updates, updates take place only after a particular
time interval has passed
2. We remove the node from the RB-Tree when the usage goes below the soft
limit
The next set of patches will exploit the RB-Tree to get the group that is
over its soft limit by the largest amount and reclaim from it, when we
face memory contention.
[hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an interface to allow get/set of soft limits. Soft limits for memory
plus swap controller (memsw) is currently not supported. Resource
counters have been enhanced to support soft limits and new type
RES_SOFT_LIMIT has been added. Unlike hard limits, soft limits can be
directly set and do not need any reclaim or checks before setting them to
a newer value.
Kamezawa-San raised a question as to whether soft limit should belong to
res_counter. Since all resources understand the basic concepts of hard
and soft limits, it is justified to add soft limits here. Soft limits are
a generic resource usage feature, even file system quotas support soft
limits.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter the ss->can_attach and ss->attach functions to be able to deal with
a whole threadgroup at a time, for use in cgroup_attach_proc. (This is a
pre-patch to cgroup-procs-writable.patch.)
Currently, new mode of the attach function can only tell the subsystem
about the old cgroup of the threadgroup leader. No subsystem currently
needs that information for each thread that's being moved, but if one were
to be added (for example, one that counts tasks within a group) this bit
would need to be reworked a bit to tell the subsystem the right
information.
[hidave.darkstar@gmail.com: fix build]
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changes css_set freeing mechanism to be under RCU
This is a prepatch for making the procs file writable. In order to free the
old css_sets for each task to be moved as they're being moved, the freeing
mechanism must be RCU-protected, or else we would have to have a call to
synchronize_rcu() for each task before freeing its old css_set.
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Separates all pidlist allocation requests to a separate function that
judges based on the requested size whether or not the array needs to be
vmalloced or can be gotten via kmalloc, and similar for kfree/vfree.
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously there was the problem in which two processes from different pid
namespaces reading the tasks or procs file could result in one process
seeing results from the other's namespace. Rather than one pidlist for
each file in a cgroup, we now keep a list of pidlists keyed by namespace
and file type (tasks versus procs) in which entries are placed on demand.
Each pidlist has its own lock, and that the pidlists themselves are passed
around in the seq_file's private pointer means we don't have to touch the
cgroup or its master list except when creating and destroying entries.
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct cgroup used to have a bunch of fields for keeping track of the
pidlist for the tasks file. Those are now separated into a new struct
cgroup_pidlist, of which two are had, one for procs and one for tasks.
The way the seq_file operations are set up is changed so that just the
pidlist struct gets passed around as the private data.
Interface example: Suppose a multithreaded process has pid 1000 and other
threads with ids 1001, 1002, 1003:
$ cat tasks
1000
1001
1002
1003
$ cat cgroup.procs
1000
$
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following series adds a "cgroup.procs" file to each cgroup that
reports unique tgids rather than pids, and allows all threads in a
threadgroup to be atomically moved to a new cgroup.
The subsystem "attach" interface is modified to support attaching whole
threadgroups at a time, which could introduce potential problems if any
subsystem were to need to access the old cgroup of every thread being
moved. The attach interface may need to be revised if this becomes the
case.
Also added is functionality for read/write locking all CLONE_THREAD
fork()ing within a threadgroup, by means of an rwsem that lives in the
sighand_struct, for per-threadgroup-ness and also for sharing a cacheline
with the sighand's atomic count. This scheme should introduce no extra
overhead in the fork path when there's no contention.
The final patch reveals potential for a race when forking before a
subsystem's attach function is called - one potential solution in case any
subsystem has this problem is to hang on to the group's fork mutex through
the attach() calls, though no subsystem yet demonstrates need for an
extended critical section.
This patch:
Revert
commit 096b7fe012
Author: Li Zefan <lizf@cn.fujitsu.com>
AuthorDate: Wed Jul 29 15:04:04 2009 -0700
Commit: Linus Torvalds <torvalds@linux-foundation.org>
CommitDate: Wed Jul 29 19:10:35 2009 -0700
cgroups: fix pid namespace bug
This is in preparation for some clashing cgroups changes that subsume the
original commit's functionaliy.
The original commit fixed a pid namespace bug which Ben Blum fixed
independently (in the same way, but with different code) as part of a
series of patches. I played around with trying to reconcile Ben's patch
series with Li's patch, but concluded that it was simpler to just revert
Li's, given that Ben's patch series contained essentially the same fix.
Signed-off-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes the restriction that a cgroup hierarchy must have at
least one bound subsystem. The mount option "none" is treated as an
explicit request for no bound subsystems.
A hierarchy with no subsystems can be useful for plain task tracking, and
is also a step towards the support for multiply-bindable subsystems.
As part of this change, the hierarchy id is no longer calculated from the
bitmask of subsystems in the hierarchy (since this is not guaranteed to be
unique) but is allocated via an ida. Reference counts on cgroups from
css_set objects are now taken explicitly one per hierarchy, rather than
one per subsystem.
Example usage:
mount -t cgroup -o none,name=foo cgroup /mnt/cgroup
Based on the "no-op"/"none" subsystem concept proposed by
kamezawa.hiroyu@jp.fujitsu.com
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the cgroups code makes the assumption that the subsystem
pointers in a struct css_set uniquely identify the hierarchy->cgroup
mappings associated with the css_set; and there's no way to directly
identify the associated set of cgroups other than by indirecting through
the appropriate subsystem state pointers.
This patch removes the need for that assumption by adding a back-pointer
from struct cg_cgroup_link object to its associated cgroup; this allows
the set of cgroups to be determined by traversing the cg_links list in
the struct css_set.
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While it's architecturally clean to have the cgroup debug subsystem be
completely independent of the cgroups framework, it limits its usefulness
for debugging the contents of internal data structures. Move the debug
subsystem code into the scope of all the cgroups data structures to make
more detailed debugging possible.
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To simplify referring to cgroup hierarchies in mount statements, and to
allow disambiguation in the presence of empty hierarchies and
multiply-bindable subsystems this patch adds support for naming a new
cgroup hierarchy via the "name=" mount option
A pre-existing hierarchy may be specified by either name or by subsystems;
a hierarchy's name cannot be changed by a remount operation.
Example usage:
# To create a hierarchy called "foo" containing the "cpu" subsystem
mount -t cgroup -oname=foo,cpu cgroup /mnt/cgroup1
# To mount the "foo" hierarchy on a second location
mount -t cgroup -oname=foo cgroup /mnt/cgroup2
Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the last unlock sequence consistent with previous unlock sequeue.
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many similar code in kernel for one object: convert time between
calendar time and broken-down time.
Here is some source I found:
fs/ncpfs/dir.c
fs/smbfs/proc.c
fs/fat/misc.c
fs/udf/udftime.c
fs/cifs/netmisc.c
net/netfilter/xt_time.c
drivers/scsi/ips.c
drivers/input/misc/hp_sdc_rtc.c
drivers/rtc/rtc-lib.c
arch/ia64/hp/sim/boot/fw-emu.c
arch/m68k/mac/misc.c
arch/powerpc/kernel/time.c
arch/parisc/include/asm/rtc.h
...
We can make a common function for this type of conversion, At least we
can get following benefit:
1: Make kernel simple and unify
2: Easy to fix bug in converting code
3: Reduce clone of code in future
For example, I'm trying to make ftrace display walltime,
this patch will make me easy.
This code is based on code from glibc-2.6
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Audit will not respond to signal requests if selinux is disabled since it is
unable to translate the 0 sid from the sending process to a context. This
patch just doesn't send the context info if there isn't any.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pahole pointed out that on x86_64 struct audit_context can be rearrainged
to save 16 bytes per struct. Since we have an audit_context per task this
can acually be a pretty significant gain.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pahole showed that struct audit_watch had two holes:
struct audit_watch {
atomic_t count; /* 0 4 */
/* XXX 4 bytes hole, try to pack */
char * path; /* 8 8 */
dev_t dev; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
long unsigned int ino; /* 24 8 */
struct audit_parent * parent; /* 32 8 */
struct list_head wlist; /* 40 16 */
struct list_head rules; /* 56 16 */
/* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */
/* size: 72, cachelines: 2, members: 7 */
/* sum members: 64, holes: 2, sum holes: 8 */
/* last cacheline: 8 bytes */
}; /* definitions: 1 */
by moving dev after count we save 8 bytes, actually improving cacheline
usage. There are typically very few of these in the kernel so it won't be
a large savings, but it's a good thing no matter what.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (39 commits)
cpumask: Move deprecated functions to end of header.
cpumask: remove unused deprecated functions, avoid accusations of insanity
cpumask: use new-style cpumask ops in mm/quicklist.
cpumask: use mm_cpumask() wrapper: x86
cpumask: use mm_cpumask() wrapper: um
cpumask: use mm_cpumask() wrapper: mips
cpumask: use mm_cpumask() wrapper: mn10300
cpumask: use mm_cpumask() wrapper: m32r
cpumask: use mm_cpumask() wrapper: arm
cpumask: Use accessors for cpu_*_mask: um
cpumask: Use accessors for cpu_*_mask: powerpc
cpumask: Use accessors for cpu_*_mask: mips
cpumask: Use accessors for cpu_*_mask: m32r
cpumask: remove arch_send_call_function_ipi
cpumask: arch_send_call_function_ipi_mask: s390
cpumask: arch_send_call_function_ipi_mask: powerpc
cpumask: arch_send_call_function_ipi_mask: mips
cpumask: arch_send_call_function_ipi_mask: m32r
cpumask: arch_send_call_function_ipi_mask: alpha
cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64
...
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need it
NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c02e3f361c ("kmod: fix race in usermodehelper code")
The patch is wrong. UMH_WAIT_EXEC is called with VFORK what ensures
that the child finishes prior returing back to the parent. No race.
In fact, the patch makes it even worse because it does the thing it
claims not do:
- It calls ->complete() on UMH_WAIT_EXEC
- the complete() callback may de-allocated subinfo as seen in the
following call chain:
[<c009f904>] (__link_path_walk+0x20/0xeb4) from [<c00a094c>] (path_walk+0x48/0x94)
[<c00a094c>] (path_walk+0x48/0x94) from [<c00a0a34>] (do_path_lookup+0x24/0x4c)
[<c00a0a34>] (do_path_lookup+0x24/0x4c) from [<c00a158c>] (do_filp_open+0xa4/0x83c)
[<c00a158c>] (do_filp_open+0xa4/0x83c) from [<c009ba90>] (open_exec+0x24/0xe0)
[<c009ba90>] (open_exec+0x24/0xe0) from [<c009bfa8>] (do_execve+0x7c/0x2e4)
[<c009bfa8>] (do_execve+0x7c/0x2e4) from [<c0026a80>] (kernel_execve+0x34/0x80)
[<c0026a80>] (kernel_execve+0x34/0x80) from [<c004b514>] (____call_usermodehelper+0x130/0x148)
[<c004b514>] (____call_usermodehelper+0x130/0x148) from [<c0024858>] (kernel_thread_exit+0x0/0x8)
and the path pointer was NULL. Good that ARM's kernel_execve()
doesn't check the pointer for NULL or else I wouldn't notice it.
The only race there might be is with UMH_NO_WAIT but it is too late for
me to investigate it now. UMH_WAIT_PROC could probably also use VFORK
and we could save one exec. So the only race I see is with UMH_NO_WAIT
and recent scheduler changes where the child does not always run first
might have trigger here something but as I said, it is late....
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
