The DRM uses the adjusted mode to calculate constants for vblank
timestamping. Our encoder mode_fixup (usually) replaces this data
with our backend mode information, which doesn't have the needed
data filled in already.
Reported-by: Mario Kleiner mario.kleiner.de@gmail.com
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some DCE8 boards have a funky BlankCrtc table that results
in a timeout when trying to blank the display. The
timeout is harmless (all operations needed from the table
are complete), but wastes time and is confusing to users so
work around it.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This is effectively a revert of 4573388c92.
Forcing a display active when there is none causes problems with
dpm on some SI boards which results in improperly initialized
dpm state and boot failures on some boards. As for the bug commit
4573388c92 tried to address, one can manually force the state to
high for better performance when using the card as a headless compute
node until a better fix is developed.
bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=73788https://bugs.freedesktop.org/show_bug.cgi?id=69395
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cc: stable@vger.kernel.org
DCE5 and newer hardware only has 1 DAC. Use the correct
offset. This may fix display problems on certain board
configurations.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture. We generally either use the gfx
or dma engine to do this. Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The hw is buggy and it's not currently used, but it's
currently still initialized by the driver. Skip the init.
Skipping init also seems to improve stability with dpm on
some r6xx asics.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=66963
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Prevent runtime suspend of non-PX GPUs. Runtime suspend is
not what we want in those cases.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise we allocate a new VMID on nearly every submit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove old SPI control functions, change anti-pop init
sequence, remove some garbage from structures. The 'Apply' functions
must be called at the mixer initialization, otherwise
mixer settings sometimes will not be applied at startup.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Change the 'put' function of the high-pass filter control to use the new
SPI functions.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
First of all, we should not touch the GPIOs. They are not
for selecting the capture source, but they seems just enable
the whole audio input curcuit. The 'put' function calls the
'apply' functions to change register values. Change the order
of capture sources.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Modify the input_vol_* functions to use the new SPI routines,
There is a new applying function that will be called when
the capture source changed.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
I tried both variants: volume control and impedance selector.
In the first case one minus is that we can't change the
volume of multichannel output without additional software
volume control. However, I am using this variant for the
last three months and this seems good. All multichannel
speaker systems have internal amplifier with the
volume control included, but not all headphones have
this regulator. In the second case, my software volume
control does not save the value after reboot.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Change the order of elements in the output select control. This will
reduce the number of relay switches. Change 'put' function to call the
oxygen_update_dac_routing() function. Otherwise multichannel playback
does not work. Also there is a new function to apply settings, this
prevents from duplicating the code.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Actually CS4245 connected to the I2S channel 1 for
capture, not channel 2. Otherwise capturing and
playback does not work for CS4245.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Moving the mixer code away makes things easier. The mixer
will control the driver, so the functions of the
driver need to be non-static.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Change the function to read the data from the new shadow buffer.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
When selecting the audio output destinations (headphones,
FP headphones, multichannel output), the channel routing
should be changed depending on what destination selected.
Also unnecessary I2S channels are digitally muted. This
function called when the user selects the destination
in the ALSA mixer.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
When selecting the audio sample rate for CS4245,
the MCLK divider should also be changed.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Change CS4245 initialization: different sequence and GPIO values,
according to datasheets and reverse-engineering information.
Change cleanup/resume/suspend functions, since they use
initialization.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Add the new SPI write and read functions. The SPI read function
is used for creating initial registers dump and may be used for
debugging purposes. SPI operations are cached, so there is a new
function to manage the cache (shadow). I have to remove
the shift from the CS4245_SPI_* constants, since when
we are performing the reading, we need to shift by 8 instead
of 16.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Add additional constants to the xonar_dg.h file:
capture and playback sources. Move GPIO_* constants and the
dg struct to the header file from the xonar_dg.c file.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Add some additional information in comments and my copyright.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
When the user switches the output from stereo to multichannel
or vice versa, the driver needs to update the channel routing.
Instead of creating additional subroutines, I better export existing
oxygen_update_dac_routing symbol from the oxygen mixer
and call this function. It calls model.adjust_dac_routing()
and my function does the work.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The Xonar DG/DGX driver needs this mask to mute unnecessary
channels.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Modify the oxygen_write_spi() function to use the newly
introduced oxygen_wait_spi() function. Change return value
from void to int, so it can return error codes. Older
drivers just ignore that return value, new drivers can
check this value. We need to wait AFTER
initiating the SPI transaction, otherwise read
operation will not work.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The oxygen_wait_spi() function now performs waiting when the
SPI bus completes a transaction. Introduce the timeout error
checking and increase timeout to 200 from 40.
Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The driver prints IT8771F and IT8772F instead of IT8771E and IT8772E
respectively when the driver is loaded. This is a cosmetic only bug
but let's fix it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Add support for IT8603E.
This closes bug #57861:
https://bugzilla.kernel.org/show_bug.cgi?id=57861
[JD: Fixes and clean-ups.]
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Move the test for res->sr_slot == NULL out of the nfs41_sequence_free_slot
helper and into the main function for efficiency.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The check for whether or not we sent an RPC call in nfs40_sequence_done
is insufficient to decide whether or not we are holding a session slot,
and thus should not be used to decide when to free that slot.
This patch replaces the RPC_WAS_SENT() test with the correct test for
whether or not slot == NULL.
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When Hyper-V hypervisor leaves are present, KVM must relocate
its own leaves at 0x40000100, because Windows does not look for
Hyper-V leaves at indices other than 0x40000000. In this case,
the KVM features are at 0x40000101, but the old code would always
look at 0x40000001.
Fix by using kvm_cpuid_base(). This also requires making the
function non-inline, since kvm_cpuid_base() is static.
Fixes: 1085ba7f55
Cc: stable@vger.kernel.org
Cc: mtosatti@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is unnecessary to go through hypervisor_cpuid_base every time
a leaf is found (which will be every time a feature is requested
after the next patch).
Fixes: 1085ba7f55
Cc: stable@vger.kernel.org
Cc: mtosatti@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a dynamic session slot leak where a slot is preallocated and I/O is
resent through the MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Processing coefficients are often a vital part of the codec's configuration,
so dumping them can be important. However, because they are undocumented and
secret, we do not want to enable this for all codecs by default.
Therefore instead add this as a debugging parameter.
I have prepared for codecs that want to enable this by default by the extra
dump_coef bitfield, but unsure if we want to do that as long as the
(unlikely, but still) race remains.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Geert reported:
arch/xtensa/platforms/iss/simdisk.c:108:23: error: 'struct bio' has no member named 'bi_sector'
arch/xtensa/platforms/iss/simdisk.c:110:2: error: incompatible types when assigning to type 'int' from type 'struct bvec_iter'
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bv_len' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
make[2]: *** [arch/xtensa/platforms/iss/simdisk.o] Error 1
Fixup the usage of bio_for_each_segment(). Also fix wrong use
of __bio_kunmap_atomic() - it needs the mapped buffer passed in,
not the originally mapped page.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have a race during inode init because the BTRFS_I(inode)->location is setup
after the inode hash table lock is dropped. btrfs_find_actor uses the location
field, so our search might not find an existing inode in the hash table if we
race with the inode init code.
This commit changes things to setup the location field sooner. Also the find actor now
uses only the location objectid to match inodes. For inode hashing, we just
need a unique and stable test, it doesn't have to reflect the inode numbers we
show to userland.
Signed-off-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org
If we truncate an uncompressed inline item, ram_bytes isn't updated to reflect
the new size. The fixe uses the size directly from the item header when
reading uncompressed inlines, and also fixes truncate to update the
size as it goes.
Reported-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org
If the current path's leaf slot is 0, we do search for the previous
leaf (via btrfs_prev_leaf) and set the new path's leaf slot to a
value corresponding to the number of items - 1 of the former leaf.
Fix this by using the slot set by btrfs_prev_leaf, decrementing it
by 1 if it's equal to the leaf's number of items.
Use of btrfs_search_slot_for_read() for backward iteration is used in
particular by the send feature, which could miss items when the input
leaf has less items than its previous leaf.
This could be reproduced by running btrfs/007 from xfstests in a loop.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
