Commit Graph

960 Commits

Author SHA1 Message Date
Bastien Nocera
3bfa74f860 iio:kxcjk-1013: Add support for SMO8500 device
The Onda v975w tablet contains an accelerometer that's advertised over
ACPI as SMO8500. This device is however a KXCJ9 accelerometer as
can be seen in the Windows driver's INF file, and from the etching on
the chipset ("KXCJ9 41566 0414").

This patch also removes the attempt to get the IRQ for the "data ready"
signal, as it does not seem to be supported by this device on this
platform.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-08 12:40:53 +00:00
Kuppuswamy Sathyanarayanan
995863cc8e iio: jsa1212: Add JSA1212 proximity/ALS sensor
This patch adds a new driver for solteam opto JSA1212 proximity and
ambient light sensor.

Basic details of the chip can be found here.

http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-08 12:24:50 +00:00
Greg Kroah-Hartman
be61a0d784 First round of new drivers, features and cleanups for IIO in the 3.19 cycle.
New drivers / supported parts
 * rockchip - rk3066-tsadc variant
 * si7020 humidity and temperature sensor
 * mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
 * bmp280 pressure and temperature sensor
 * Qualcomm SPMI PMIC current ADC driver
 * Exynos_adc - support exynos7
 
 New features
 * vf610-adc - add temperature sensor support
 * Documentation of current attributes, scaled pressure, offset and
   scaled humidity, RGBC intensity gain factor and scale applied to
   differential voltage channels.
 * Bring iio_event_monitor up to date with newer modifiers.
 * Add of_xlate function to allow for complex channel mappings from the
   device tree.
 * Add -g parameter to generic_buffer example to allow for devices with
   directly fed (no trigger) buffers.
 * Move exynos driver over to syscon for PMU register access.
 
 Cleanups, fixes for new drivers
 * lis3l02dq drop an unneeded else.
 * st sensors - renam st_sensors to st_sensor_settings (for clarity)
 * st sensors - drop an unused parameter from all the probe utility
   functions.
 * vf610 better error handling and tidy up.
 * si7020 - cleanups following merge
 * as3935 - drop some unnecessary semicolons.
 * bmp280 - fix the pressure calculation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUWnZBAAoJEFSFNJnE9BaIZAAQAJpkot0ZAYPwtIkmtV1JqrLQ
 EZRkBN+cIf3q5zp/TnQTqfyhKbpHbJ9/Pnb0zHvn7Yh3WpZod2tyoC3xb8JAlX2h
 3tJRrA7plkdMjtwO/ryOxrVJYrm6rCeqKpciwMpDf4E/4fhU5CU++TpmWbhn04qB
 7PEZJN5dkmdnQYSIyNle11MYN+NpCAB4zqDvRJoJHpqZV6zAqygJy03H1PqXFS/S
 iNBL3jS8/PTbeUURUFOQTiqnJw5KuDke7OoXxUfvCpUwQfNLD8mOTrVrEoId1cM0
 Y2fmasfHteh83KP34/MOTwNA3EezM8iQOMzJnXtOpxpySPDrDSP68FDAJs15TUJm
 je8E1xxxdjOWuzgSd9djNm9qhlBkoYgbRwzc8wSAHMK7mCV7pP485WZk5E8rRX2z
 gMFgUmu4LkiZ2V9glGTAcHqnjhLNDTRCp1Nl/sMVgssFBBNjgR5+nZjUFqDR2QpD
 eo4ReIzev7Rzxe2lACRjnRrCnO+KKcjiDkyCdM3X2zdTddQRVrP5Uz+jgnvGAeMO
 hCYDHSOiMzV/r5emVfmNG9w8P9a6rZqu4KqcM/KjSzAfHFQTqmfr4Tkfn/hbeUjY
 h/zzB18EM4kUSxm3E6+CbFRWcfC7b/PLcUOwSitdujb9cYaX72gdesO2/P3jNFAK
 2bjoLRr5l4M4n/DeHae4
 =BDOo
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7

New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
  scaled humidity, RGBC intensity gain factor and scale applied to
  differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
  device tree.
* Add -g parameter to generic_buffer example to allow for devices with
  directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.

Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
  functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.
2014-11-05 11:42:48 -08:00
Hartmut Knaack
81ebe850a0 iio:pressure:bmp280: fix pressure calculation
According to the datasheet and as defined in struct bmp280_comp_press, dig_p1 is
of type u16, while dig_p2 to dig_p9 are of type s16. In
bmp280_read_compensation_press(), values read from the device were treated as
the wrong type.
In bmp280_read_press() the fractional part of the measured pressure is
calculated wrong. A better way is to use *val for the raw pressure and *val2 for
the quotient and let the core do the proper conversion using IIO_VAL_FRACTIONAL.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:58:35 +00:00
Abhilash Kesavan
c1b501564c iio: adc: exynos_adc: Add support for exynos7
The ADC on exynos7 is quite similar to ADCv2. The differences are as
follows:
	- exynos7-adc has 8 input channels (as against 10 in ADCv2).
	- exynos7 does not include an ADC PHY control register.
	- Some ADC_CON2 register bits being used in ADCv2 are listed as
	  reserved in exynos7-adc. This results in a different init_hw
	  function for exynos7.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:38:25 +00:00
Naveen Krishna Chatradhi
fafb37cfae iio: exyno-adc: use syscon for PMU register access
This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:30:09 +00:00
George McCollister
455f0049e0 iio: as3935: Remove unnecessary semicolons
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 13:47:42 +00:00
Ivan T. Ivanov
ce0694841e iio: iadc: Qualcomm SPMI PMIC current ADC driver
The current ADC is peripheral of Qualcomm SPMI PMIC chips. It has
16 bits resolution and register space inside PMIC accessible across
SPMI bus.

The driver registers itself through IIO interface.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 21:03:22 +01:00
Hartmut Knaack
e0922e5e3c iio:humidity:si7020: fix pointer to i2c client
In si7020_read_raw() the pointer to the i2c client was obtained as second level
pointer, although a simple pointer is appropriate.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 20:55:56 +01:00
Hartmut Knaack
345b48307d iio:humidity:si7020: cleanup read_raw and probe
When reading temperature or humidity values, a shift of two bits to the right
needs to be applied, and only for the humidity channel a mask of the lower
12 bits needs to be applied. This reduces code repetition.
During probe, i2c_set_clientdata() was used, although its counterpart was not,
so drop it.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 20:55:56 +01:00
Ivan T. Ivanov
acd8256723 iio: inkern: Add of_xlate function to struct iio_info
When #iio-cells is greater than '0', the driver could provide
a custom of_xlate function that reads the *args* and returns
the appropriate index in registered IIO channels array.

Add simple translation function, suitable for the most 1:1
mapped channels in IIO chips, and use it when driver did not
provide custom implementation.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 11:03:40 +01:00
Vlad Dogaru
46ee98a206 bmp280: use correct routine for division
The proper way to divide two signed 64-bit values is to use div64_s64.

Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 10:44:54 +01:00
Greg Kroah-Hartman
7e74783a9d First round of IIO fixes for the 3.18 cycle.
* ad5933 - fix a null pointer dereference due to an old change that prevents
   different channels being registered for the buffer and used for sysfs
   interfaces.
 * ad5933 - Drop a bonus _raw from attribute names.
 * st-sensors - Makes sure the correct number of elements are copied when
   filling a local buffer copy.
 * mxs-lradc - Disable clocks in a failure path during probe so they aren't
   left running.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUPWESAAoJEFSFNJnE9BaI/TAP/2EZp7NR+k3CRZVRLuXxeSrD
 voMS3zNtYMC2E56W0l89gOZdR4rCXzJlhUdRHcGkl7qw1r6stjEBMKIJmd3NVEc4
 dOZ4tCsb/kTmF+66QitL73ioZqoLMrpaGubf8l10t8V3wSsOqnf3wYUftGcdl4NK
 uXAIDmUYgAm4zUUZCKE95o2Npkotm5ftRQqgdChuK7vGVJikN8blzRDokGcZTAh6
 CR04tktxhkg/E+Nq67h9zXPnMOTbw4onNGKD3cztGKZ2bBN+4W/ywEnUrTOu35Eg
 zKMkwYnlBKMTOkTwzml4izHlZw/yFXTXHSPwm1a2fxcVuLuGUBuxX5Pa+kCpLOJo
 2aewUhnwlXhvCrDcFq/rTeqUsOV8mfZxuxqVOQ/utbyUgX5LtHCgQ8aPf0GBbty7
 l8SzxTkCXyogUc4PbNh8DqqksKGkMn/AtC3MfWeEvAYdCZpMXROb4RTAAMVvqytl
 34DMKVaRUy8eiUfcJ+8cH9LvH3Gri7OIbXeLD7iatZ7anaXlQB/EzjTc8yw7+t+C
 EBa7s90XhbRCkE5cadZm76deSscyGgX1cCQS6eStzn1AF0LY/Cj1KMkkJjtFFN31
 Cc7SOAa7rY0BwotwVRV5id4tihyxU9b/Dxi1StoioP4Rjp0B3Y9WsN+EuvPGjFYo
 4JrfV0JYhHktQF+rEmM0
 =TYUO
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of IIO fixes for the 3.18 cycle.

* ad5933 - fix a null pointer dereference due to an old change that prevents
  different channels being registered for the buffer and used for sysfs
  interfaces.
* ad5933 - Drop a bonus _raw from attribute names.
* st-sensors - Makes sure the correct number of elements are copied when
  filling a local buffer copy.
* mxs-lradc - Disable clocks in a failure path during probe so they aren't
  left running.
2014-10-25 10:09:39 +08:00
Vlad Dogaru
d5c94568cc iio: add bmp280 pressure and temperature driver
Minimal implementation, can read temperature and data using direct mode.

Datasheet available at
<http://ae-bst.resource.bosch.com/media/products/dokumente/bmp280/BST-BMP280-DS001-09.pdf>

Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-22 20:28:27 +01:00
Fabio Estevam
8552befa30 iio: adc: vf610: Propagate the real error when platform_get_irq() fails
There is no need to pass a 'fake' return value when platform_get_irq() fails.

Propagate the real error instead.

While at it, only consider negative numbers returned by platform_get_irq()
as error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-22 20:28:11 +01:00
Søren Andersen
b12206e917 iio: adc: mcp320x. Add support for more ADCs
Signed-off-by: Soeren Andersen <san at rosetechnology.dk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-09 20:14:03 +01:00
David Barksdale
064a74637c IIO: add si7020 driver
This patch adds support to the Industrial IO subsystem
for the Silicon Labs Si7013/20/21 Relative Humidity and
Temperature Sensors.

Website: http://www.silabs.com/products/sensors/humidity-sensors/Pages/si7013-20-21.aspx

These are i2c devices which measure relative humidity
and temperature and all use the same protocol. The
Si7013 has an additional input with programmable
linearization which is not supported because that's
complicated and I didn't need it.

Signed-off-by: David Barksdale <dbarksdale@uplogix.com>

--
Changes since v1:
* Renamed to si7020 and replaced Si701x/2x with Si7013/20/21.
* Removed unneeded mutex.
* Pre-computed floating-point constant expressions.
* Removed address_list and I2C_CLASS_HWMON.

Changes since v2:
* Return correct raw sensor values.
* Rename dev variable to indio_dev.
* Issue a software reset command during probe.
* Un-broke string literal.

Changes since v3:
* enum changed to #define
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:43:30 +01:00
Fabio Estevam
ef0d545493 iio: adc: vf610: SIMPLE_DEV_PM_OPS can fit on a single line
No need to call the SIMPLE_DEV_PM_OPS() macro in several lines.

It can fit into the 80-column range.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:31:05 +01:00
Fabio Estevam
9da64c25ff iio: adc: vf610: Disable the regulator on error
If clk_prepare_enable() fails we should disable the regulator that was
previously enabled.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:30:26 +01:00
Fabio Estevam
2e3d6675dc iio: adc: vf610: Return the error code directly
There is no need to pass the error clock code to the variable 'ret'.

Just return the error directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:28:02 +01:00
Robin van der Gracht
4250c90b30 iio: st_sensors: Fix buffer copy
Use byte_for_channel as iterator to properly initialize the buffer.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: <Stable@vger.kernel.org>
2014-10-04 12:10:57 +01:00
Denis CIOCCA
7be178bb48 iio:common: Set the device pointer into ST common sensors library
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:26:21 +01:00
Denis CIOCCA
a1dcf42927 iio:pressure: Changed pressure data variable name to press_data
This patch fix pressure data variable name. Usually pdata name
it is used for platform data.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:26:09 +01:00
Denis CIOCCA
0baa3fc1b6 iio:pressure: Removed unnecessary parameter on common_probe function
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:25:38 +01:00
Denis CIOCCA
2109eb4c0c iio:magnetometer: Removed unnecessary parameter on common_probe function
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:25:19 +01:00
Denis CIOCCA
ef67b34147 iio:gyro: Removed unnecessary parameter on common_probe function
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:24:52 +01:00
Denis CIOCCA
b6e6bda626 iio:accel: Removed unnecessary parameter on common_probe function
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:24:33 +01:00
Denis CIOCCA
a7ee8839da iio:imu: changed structure name from st_sensors to st_sensor_settings
This patch change structure name and related variables names.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 11:23:13 +01:00
Greg Kroah-Hartman
8deab4754c staging: iio: fix up merge error
Fix up a build merge error in drivers/iio/accel/bma180.c that I caused.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22 07:54:10 -07:00
Greg Kroah-Hartman
d84a2b0d6f Merge 3.17-rc6 into staging-next.
We want the fixes in there, and it resolves a merge issue with
drivers/iio/accel/bma180.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22 07:30:03 -07:00
Heiko Stübner
4c21bbb475 iio: adc: rockchip_saradc: add support for rk3066-tsadc variant
Older Rockchip SoCs, at least the rk3066, used a slightly modified saradc
for temperature measurements. This so called tsadc does not contain any
active parts like temperature interrupts and only supports polling the
current temperature. The returned voltage can then be converted by a
suitable thermal driver to and actual temperature and used for thermal
handling.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-21 13:39:36 +01:00
Sanchayan Maity
774623ca41 iio:adc:vf610-adc: Add temperature sensor support
Vybrid ADC peripheral includes a temperature sensor
which is connected to channel number 26. This patch
adds support for the sensor. The raw value is read
and the temperature calculated in milli degree Celsius,
which is returned using IIO_CHAN_INFO_PROCESSED option.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-21 13:25:56 +01:00
Peter Meerwald
2017cff24c iio:bma180: Add BMA250 chip support
the BMA250 has only 10-bit resolution; while the data readout registers
have identical layout, the configuration is completely different compared
to the BMA180

datasheet: http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/BST-BMA250-DS002-05.pdf

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 20:52:25 +01:00
Peter Meerwald
402a324e61 iio:bma180: Implement _available sysfs attribute dynamically
makes it easier to add more chip variants and removes redundancy:
scales and frequencies are now stated just once

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 20:50:58 +01:00
Peter Meerwald
6377aa496a iio:bma180: Prepare for accelerometer channels with different resolutions
allow to specify channels resolution and compute shift assuming
16-bit registers and MSB allocation

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 20:26:08 +01:00
Peter Meerwald
c1949ec18e iio:bma180: Introduce part-specific _config() and disable() code
move part of bma180_init() to bma180_config() (split initialization and
configuration code); configuration is heavily chip-specific

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 20:25:59 +01:00
Peter Meerwald
1b9030f5a0 iio:bma180: Introduce part_info to differentiate further chip variants
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 20:21:30 +01:00
Peter Meerwald
b9a6a237ff iio:bma180: Drop _update_scan_mode()
statically allocate maximum size

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 20:19:52 +01:00
Peter Meerwald
b81fbab7f5 iio:bma180: Expose temperature channel
8-bit signed; 0 LSB @ 24 °C, 0.5 °C per LSB

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:48:39 +01:00
Peter Meerwald
c7c69e8540 iio:bma180: Use bool instead of int for state
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:48:13 +01:00
Peter Meerwald
9a70b147da iio:bma180: Rename BMA_180 to BMA180_
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:47:51 +01:00
Peter Meerwald
cab767d54d iio:bma180: Prefix remaining tables and functions with bma18_
and minor cleanups

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:47:23 +01:00
Peter Meerwald
16ed8692fa iio:bma180: Enable use of device without IRQ
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:46:49 +01:00
Irina Tirdea
3a0888edcf iio: gyro: bmi055 gyro sensor driver
Add support for the BMI055 gyroscope sensor. BMI055 is a package
consisting of an acceleration sensor and a gyroscope. This patch
adds support for the gyroscope only.

Spec downloaded from:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmi055/BST-BMI055-DS000-06.pdf

The BMI055 gyroscope uses the same register definition as BMG160,
but does not specify a temp register. However, the temp register
seems to be working in the same way as for BMG160, so this patch
does not remove the temp channel for BMI055.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:40:42 +01:00
Daniel Baluta
c9bf2373da iio: accel: kxcjk-1013: Fix defined but unused warning
Noticed when compiling with CONFIG_PM_RUNTIME not set:
kxcjk-1013.c: warning: ‘kxcjk1013_get_startup_times’ defined but not used [-Wunused-function]

Introduced by commit 124e1b1d (iio: accel: kxcjk-1013: support runtime pm).

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:33:23 +01:00
Irina Tirdea
48edc37481 iio: magn: ak8975: fix unnecessary casting between char* and const char*
Use const char* instead of casting const char* to char*.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:31:11 +01:00
Irina Tirdea
ef1c6b2335 iio: gyro: bmg160: only set power state if PM_RUNTIME is defined
When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
which is not implemented (wil return -ENOSYS).

Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:29:19 +01:00
Denis CIOCCA
a31d092899 iio:magnetometer: bugfix magnetometers gain values
This patch fix gains values. The first driver was designed using
engineering samples, in mass production the values are changed.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:21:23 +01:00
Ludovic Desroches
d4f51956ac iio: adc: at91: don't use the last converted data register
If touchscreen mode is enabled and a conversion is requested on another
channel, the result in the last converted data register can be a
touchscreen relative value. Starting a conversion involves to do a
conversion for all active channel. It starts with ADC channels and ends
with touchscreen channels. Then if ADC_LCD register is not read quickly,
its content may be a touchscreen conversion.
To remove this temporal constraint, the conversion value is taken from
the channel data register.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:20:12 +01:00
Subbaraya Sundeep Bhatta
1887e724e2 iio: adc: xilinx-xadc: assign auxiliary channels address correctly
This patch fixes incorrect logic for assigning address
to auxiliary channels of xilinx xadc.

Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:18:22 +01:00