After recording, 'perf record' post-processes the data to determine
which buildids are needed.
That processing must process the data in time order, if possible,
because otherwise dependent events, like forks and mmaps, will not make
sense.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-4-git-send-email-adrian.hunter@intel.com
[ Moved the sample_id_add to after trying to open the events, use pr_warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing a fork event, the tools lookup the parent thread by its
tid. In a couple of cases, it is possible for that thread to have the
wrong pid.
That can happen if the data is being processed out of order, or if the
(fork) event that would have removed the erroneous thread was lost.
Assume the latter case, print a dump message, remove the erroneous
thread, create a new one with the correct pid, and keep going.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1439994561-27436-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Attempting to clone map groups onto themselves will deadlock.
It only happens because of other bugs, but the code should protect
itself anyway.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439994561-27436-2-git-send-email-adrian.hunter@intel.com
[ Use pr_debug() instead of dump_fprintf() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for Intel Processor Trace.
Intel PT support fits within the new auxtrace infrastructure. Recording
is supporting by identifying the Intel PT PMU, parsing options and
setting up events.
Decoding is supported by queuing up trace data by cpu or thread and then
decoding synchronously delivering synthesized event samples into the
session processing for tools to consume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding an Intel Processor Trace.
Intel PT trace data must be 'decoded' which involves walking the object
code and matching the trace data packets.
The decoder requests a buffer of binary data via a get_trace()
call-back, which it decodes using instruction information which it gets
via another call-back walk_insn().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a facility to log Intel Processor Trace decoding. The log is
intended for debugging purposes only.
The log file name is "intel_pt.log" and is opened in the current
directory. The log contains a record of all packets and instructions
decoded and can get very large (10 MB would be a small one).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding instructions for Intel Processor Trace. The
kernel x86 instruction decoder is copied for this.
This essentially provides intel_pt_get_insn() which takes a binary
buffer, uses the kernel's x86 instruction decoder to get details of the
instruction and then categorizes it for consumption by an Intel PT
decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding Intel Processor Trace packets.
This essentially provides intel_pt_get_packet() which takes a buffer of
binary data and returns the decoded packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the Intel Processor Trace type constant PERF_AUXTRACE_INTEL_PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels attempt to prelink vdso to its virtual address. To permit
annotation using objdump, the map__rip_2objdump() calculation must
result in that same address which we can infer from the start and offset
of the text section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1439556606-11297-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following 32-bit compilation errors:
util/annotate.c: In function ‘addr_map_symbol__account_cycles’:
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘u64’ [-Werror=format=]
pr_debug2("BB with bad start: addr %lx start %lx sym %lx saddr %lx\n",
^
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ [-Werror=format=]
util/annotate.c:643:3: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘u64’ [-Werror=format=]
These were introduced by the patch:
"perf report: Add infrastructure for a cycles histogram"
Also change the 'saddr' variable from 'unsigned long' to 'u64'
noting that theoretically we could be processing data captured
on a 64-bit machine but processing it on a 32-bit machine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: d4957633bf ("perf report: Add infrastructure for a cycles histogram")
Link: http://lkml.kernel.org/r/1439536294-18241-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff reported non functional DWARF unwind under perf script. The
reason is that perf script does not properly configure
callchain_param.record_mode, which is needed by unwind code.
Stealing the code from report and leaving the place for more
initialization code in a hope we could merge it with
report__setup_sample_type one day.
Reported-by: Milian Wolff <mail@milianw.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150813071724.GA21322@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were storing the vfs_getname payload (i.e. ptr->string) into
the trace wide storage area (struct trace), so that we could use the
last payload when setting up the fd->pathname per thread tables, oops,
not a good idea for multi cpu tracing sessions...
Fix it by moving it to the per thread area (struct thread_trace).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3j05ttqyaem7kh7oubvr1keo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 75186a9b09 (perf probe: Fix to show lines of sys_ functions
correctly) introduced a bug by a missed brace around if block. This
fixes to add it.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 75186a9b09 ("perf probe: Fix to show lines of sys_ functions correctly")
Link: http://lkml.kernel.org/r/20150812215541.9088.62425.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Fedora 22 version of libdw requires a couple of extra libraries to
link. With a dynamic link the dependencies are pulled in automatically,
but this doesn't work for static linking. Add the needed libraries
explicitely to the feature probe and the Makefile.
v2: Explicitly check for static linking and only add the dependencies
when -static is set. This is to avoid regressions on Arnaldo's system.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add tests in tests/parse-events.c to check call-graph and time option.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1439289050-40510-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"perf probe --lines sys_poll" shows only the first line of sys_poll,
because the SYSCALL_DEFINE macro:
----
SYSCALL_DEFINE*(foo,...)
{
body;
}
----
is expanded as below (on debuginfo)
----
static inline int SYSC_foo(...)
{
body;
}
int SyS_foo(...) <- is an alias of sys_foo.
{
return SYSC_foo(...);
}
----
So, "perf probe --lines sys_foo" decodes SyS_foo function and it also skips
inlined functions(SYSC_foo) inside the target function because those functions
are usually defined somewhere else.
To fix this issue, this fix checks whether the inlined function is defined at
the same point of the target function, and if so, it doesn't skip the inline
function.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150812012406.11811.94691.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to <-, that may be repurposed for horizontal scrolling.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3rctelxr4yxrjufx7z3fclb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
But we really should have something like 'strace -yy' here...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyrt1ypfq68u4ljagyk2nj1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle the SRCLINE_UNKNOWN case correctly when processing "srcfile".
Commiter note:
We can't just free it, as it was't allocated via malloc, its a guard
variable.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20150811133655.GC4524@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This time using 'trinity' to test these:
fchmodat, futimesat, llistxattr, lremovexattr, lstat, mknodat,
mq_unlink, stat and vmsplice.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1uqu249nwwh0ixrhm80k4a4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf evlist -F shows the number as if it's always sampling
frequency. But we now support per-event freq/period settings. So it'd
better to show more detailed info whether it's freq or period.
$ perf record -e 'cpu/config=1/,cpu/config=2,period=300000/' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
$ perf evlist -F
cpu/config=1/: sample_freq=4000
cpu/config=2,period=300000/: sample_period=300000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf can set per-event value of time and (sampling) period. But I
guess most users like me just want to set frequency rather than period.
So add the 'freq' term in the event parser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases it's useful to characterize samples by file. This is
useful to get a higher level categorization, for example to map cost to
subsystems.
Add a srcfile sort key to perf report. It builds on top of the existing
srcline support.
Commiter notes:
E.g.:
# perf record -F 10000 usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ]
[root@zoo ~]# perf report -s srcfile --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File
# ........ ...........
60.99% .
20.62% paravirt.h
14.23% rmap.c
4.04% signal.c
0.11% msr.h
#
The first line is collecting all the files for which srcfiles couldn't somehow
get resolved to:
# perf report -s srcfile,dso --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File Shared Object
# ........ ........... ................
40.97% . ld-2.20.so
20.62% paravirt.h [kernel.vmlinux]
20.02% . libc-2.20.so
14.23% rmap.c [kernel.vmlinux]
4.04% signal.c [kernel.vmlinux]
0.11% msr.h [kernel.vmlinux]
#
XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't
seen this on Fedora 22.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org
[ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we introduce a new sort key, we need to update the
hists__calc_col_len() function accordingly, otherwise the width
will be limited to strlen(header).
We can't update it when obtaining a line value for a column (for
instance, in sort__srcline_cmp()), because we reset it all when doing a
resort (see hists__output_recalc_col_len()), so we need to, from what is
in the hist_entry fields, set each of the column widths.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 409a8be615 ("perf tools: Add sort by src line/number")
Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The iter_add_next_cumulative_entry() function calls hist_entry__cmp(),
which may want to access the hists where this hist_entry is stored,
initialize it to let that happen and avoid segfaults.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqg98sfn4fvwcxp0pdvqauie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to unset 'perf_event_attr::freq' bit (default 1) when
'period' term is specified within event definition like:
-e 'cpu/cpu-cycles,call-graph=fp,time,period=100000'
otherwise it will handle the period value as frequency
(and fail if it crossed the maximum allowed frequency value).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150808171210.GC17040@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report/script srcline currently only the base file name of the
source file is printed. This is a good default because it usually fits
on the screen.
But in some cases we want to know the full file name, for example to
aggregate hits per file.
In the later case we need more than the base file name to resolve file
naming collisions: for example the kernel source has ~70 files named
"core.c"
It's also useful as input to post processing tools which want to point
to the right file.
Add a flag to allow full file name output.
Add an option to perf report/script to enable this option.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438986245-15191-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move callchain option parse related code to util.c, to avoid dragging
more object files into the python binding.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438890294-33409-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'struct perf_counts' and associated functions into separate
object, so we could remove stat.c object dependency from python build.
It makes the python code to build properly, because it fails to load due
to missing stat-shadow.c object dependency if some patches from Kan
Liang are applied.
So apply this one, then Kan's.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150807105103.GB8624@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous patches introduce llvm__compile_bpf() to compile source file to
eBPF object. This patch adds testcase to test it. It also tests libbpf
by opening generated object after applying next patch which introduces
HAVE_LIBBPF_SUPPORT option.
Since llvm__compile_bpf() prints long messages which users who don't
explicitly test llvm doesn't care, this patch set verbose to -1 to
suppress all debug, warning and error message, and hint user use 'perf
test -v' to see the full output.
For the same reason, if clang is not found in PATH and there's no [llvm]
section in .perfconfig, skip this test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-17-git-send-email-wangnan0@huawei.com
[ Add tools/lib/bpf/ to tools/perf/MANIFEST, so that the tarball targets build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help user find correct kernel include options, this patch extracts
them from kbuild system by an embedded script kinc_fetch_script, which
creates a temporary directory, generates Makefile and an empty dummy.o
then use the Makefile to fetch $(NOSTDINC_FLAGS), $(LINUXINCLUDE) and
$(EXTRA_CFLAGS) options. The result is passed to compiler script using
'KERNEL_INC_OPTIONS' environment variable.
Because options from kbuild contains relative path like
'Iinclude/generated/uapi', the work directory must be changed. This is
done by previous patch.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1436445342-1402-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch detects kernel build directory by checking the existence of
include/generated/autoconf.h.
clang working directory is changed to kbuild directory if it is found,
to help user use relative include path. Following patch will detect
kernel include directory, which contains relative include patch so this
workdir changing is needed.
Users are allowed to set 'kbuild-dir = ""' manually to disable this
checking.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-owyfwfbemrjn0tlj6tgk2nf5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the core patch for supporting eBPF on-the-fly compiling, does
the following work:
1. Search clang compiler using search_program().
2. Run command template defined in llvm-bpf-cmd-template option in
[llvm] config section using read_from_pipe(). Patch of clang and
source code path is injected into shell command using environment
variable using force_set_env().
Commiter notice:
When building with DEBUG=1 we get a compiler error that gets fixed with
the same approach described in commit b236512280:
perf kmem: Fix compiler warning about may be accessing uninitialized variable
The last argument to strtok_r doesn't need to be initialized, its
just a placeholder to make this routine reentrant, but gcc doesn't know
about that and complains, breaking the build, fix it by setting it to
NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-14-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces [llvm] config section with 5 options. Following
patches will use then to config llvm dynamica compiling.
'llvm-utils.[ch]' is introduced in this patch for holding all
llvm/clang related stuffs.
Example:
[llvm]
# Path to clang. If omit, search it from $PATH.
clang-path = "/path/to/clang"
# Cmdline template. Following line shows its default value.
# Environment variable is used to passing options.
#
# *NOTE*: -D__KERNEL__ MUST appears before $CLANG_OPTIONS,
# so user have a chance to use -U__KERNEL__ in $CLANG_OPTIONS
# to cancel it.
clang-bpf-cmd-template = "$CLANG_EXEC -D__KERNEL__ $CLANG_OPTIONS \
$KERNEL_INC_OPTIONS -Wno-unused-value \
-Wno-pointer-sign -working-directory \
$WORKING_DIR -c $CLANG_SOURCE -target \
bpf -O2 -o -"
# Options passed to clang, will be passed to cmdline by
# $CLANG_OPTIONS.
clang-opt = "-Wno-unused-value -Wno-pointer-sign"
# kbuild directory. If not set, use /lib/modules/`uname -r`/build.
# If set to "" deliberately, skip kernel header auto-detector.
kbuild-dir = "/path/to/kernel/build"
# Options passed to 'make' when detecting kernel header options.
kbuild-opts = "ARCH=x86_64"
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1437477214-149684-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the event parser maximum error index from 10 to 13. That allows
PMU config terms of up to 10 characters to display un-truncated in the
error message.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the value of a PMU config term is silently truncated if it is
too big. This is an impediment to validating the value for other
criteria later on i.e. the user provides an invalid value that gets
truncated to a valid one.
The maximum value validation is only done for the parser where the error
is passed back to the user. In other cases the silent truncation
continues so as not to affect tools that perhaps rely on it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_pmu__format_bits() to get the format bits for a PMU config
term. Intel PT will use this to validate terms and to record format
bits to enable later interpreting the config from the attribute stored
in the perf.data file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_ITRACE_PERIOD_INSTRUCTIONS is zero so it got overwritten by the
default period type.
Fix by checking if the period type was set rather than if the value was
zero when applying the default.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1437150840-31811-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display the cycles by default in branch sort mode.
To make enough room for the new column I removed dso_to. It is usually
redundant with dso_from.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-9-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can process branch data in annotate it makes sense to
support enabling branch recording from top too. Most of the code needed
for this is already in shared code with report. But we need to add:
- The option parsing code (using shared code from the previous patch)
- Document the options
- Set up the IPC/cycles accounting state in the top session
- Call the accounting code in the hist iter callback
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-8-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add two new columns to the annotate display and display the average
cycles and the compute IPC if available.
When the LBR was not in any branch mode the IPC computation is
automatically disabled. We still display the cycle information.
Example output (with made up numbers):
The second column is the IPC and third average cycles.
│ __attribute__((noinline)) f2()
│ {
5.15 0.07 │ push %rbp
0.01 0.07 │ mov %rsp,%rbp
│ c = a / b;
9.87 0.07 │ mov a,%eax
0.07 │ mov b,%ecx
0.07 │ cltd
4.92 0.07 123│ idiv %ecx
70.79 0.07 │ mov %eax,__TMC_END__
│ }
9.25 0.07 │ pop %rbp
0.01 0.07 123│ ← retq
v2: Fix display problems.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the IPC and the basic block cycles for the annotate display.
IPC is computed by counting the instructions, and then dividing the
accounted cycles by that count.
The actual IPC computation can only be done at annotate time, because we
need to parse the objdump output first to know the number of
instructions in the basic block.
The cycles/IPC are also put into the perf function annotation so that
the display code can show them.
Again basic block overlaps are not handled, with the longest winning,
but there are some heuristics to hide the IPC when the longest is not
the most common.
v2: Compute IPC correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call the earlier added cycle histogram infrastructure from the perf
report hist iter callback. For this we walk the branch records.
This allows to use cycle histograms when browsing perf report annotate.
v2: Rename flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the basic infrastructure to keep track of cycle counts per
basic block for annotate. We allocate an array similar to the normal
accounting, and then account branch cycles there.
We handle two cases:
cycles per basic block with start and cycles per branch (these are later
used for either IPC or just cycles per BB)
In the start case we cannot handle overlaps, so always the longest basic
block wins.
For the cycles per branch case everything is accurately accounted.
v2: Remove unnecessary checks. Slight restructure. Move
symbol__get_annotation to another patch. Move histogram allocation.
v3: Merged with current tree
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-4-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Later patches need to cheaply check that the branch mode is in ANY. Add
a new function to check all event attrs and add a flag to the report
state, which is then initialized.
v2: Rename flag
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cycles is a new branch_info field available on some CPUs that indicates
the time deltas between branches in the LBR.
Add a sort key and output code for the cycles to allow to display the
basic block cycles individually in perf report.
We also pass in the cycles for weight when LBRs are processed, which
allows to get global and local weight, to get an estimate of the total
cost.
And also print the cycles information for perf report -D. I also added
printing for the previously missing LBR flags (mispredict etc.)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf currently fails to build on MIPS as there is no
tools/perf/arch/mips/Build file. Adding an empty file fixes this as
there are no MIPS-specific sources to build.
It looks like the same is needed for Alpha and PA-RISC, though I
haven't been able to test those.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 5e8c0fb6a9 ("perf build: Add arch x86 objects building")
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438704627.7315.2.camel@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving counter processing code into stat object as
perf_stat__process_counter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing 'struct perf_stat_config' into process_counter(), so that we can
make process_counter() non static and use it from other places.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'interval' into struct perf_stat_config. The point is to
centralize the base stat config so it could be used localy together with
other stat routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'output' into struct perf_stat_config. The point is to centralize
the base stat config so it could be used localy together with other stat
routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'scale' into struct perf_stat_config. The point is to centralize
the base stat config so it could be used localy together with other stat
routines in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'aggr_mode' into new struct. The point is to centralize the base
stat config so it could be used localy together with other stat routines
in other parts of perf code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1437481927-29538-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7b6ff0bdbf ("perf probe ppc64le:
Fixup function entry if using kallsyms lookup") adds 'struct map' into
probe-event.h but not forward declares it. This patch fixes it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 7b6ff0bdbf ("perf probe ppc64le: Fixup function entry if using kallsyms lookup")
Link: http://lkml.kernel.org/n/1436445342-1402-30-git-send-email-wangnan0@huawei.com
[ No need to include map.h, just forward declare 'struct map' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
va_args alternative to eprintf().
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/1436445342-1402-19-git-send-email-wangnan0@huawei.com
[ split from another patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without this patch, it is cumbersome to read the trace output but
ignoring the normal, potentially verbose, output of the debuggee. One
common example is doing something like the following:
perf trace -s find /tmp > /dev/null
Without this patch, the trace summary will be lost. Now, it will still
be printed at the end. This behavior is also applied by strace.
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-tqnks6y2cnvm5f9g2dsfr7zl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
color_vprintf was including the length of the invisible escape sequences
in its return argument. Don't include them to make the return value
usable for indentation calculations.
v2: Add comment, rebase
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Seems like it's always '\n' through color_fprintf_ln, which is not used
at all, removing.. ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1438649408-20807-2-git-send-email-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass global callchain_param into parse_callchain_record_opt and
perf_evsel__config_callgraph as parameter. So we can reuse these
functions to parse/config local param for callchain.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patchkit adds the ability to turn off time stamps per event.
One usaful case for partial time is to work with per-event callgraph to
enable "PEBS threshold > 1" (https://lkml.org/lkml/2015/5/10/196), which
can significantly reduce the sampling overhead.
The event samples with time stamps off will not be ordered.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438677022-34296-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To work like strace and dereference syscall pointer args we need to
insert probes (or tracepoints) right after we copy those bytes from
userspace.
Since we're formatting the syscall args at raw_syscalls:sys_enter time,
we need to have a formatter that just stores the position where, later,
when we get the probe:vfs_getname, we can insert the pointer contents.
Now, if a probe:vfs_getname with this format is in place:
# perf probe -l
probe:vfs_getname (on getname_flags:72@/home/git/linux/fs/namei.c with pathname)
That was, in this case, put in place with:
# perf probe 'vfs_getname=getname_flags:72 pathname=filename:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
#
Then 'perf trace' will notice that and do the pointer -> contents
expansion:
# trace -e open touch /tmp/bla
0.165 (0.010 ms): touch/17752 open(filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
0.195 (0.011 ms): touch/17752 open(filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
0.512 (0.012 ms): touch/17752 open(filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
0.582 (0.012 ms): touch/17752 open(filename: /tmp/bla, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
#
Roughly equivalent to strace's output:
# strace -rT -e open touch /tmp/bla
0.000000 open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 <0.000039>
0.000317 open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 <0.000102>
0.001461 open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 <0.000072>
0.000405 open("/tmp/bla", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666) = 3 <0.000055>
0.000641 +++ exited with 0 +++
#
Now we need to either look for at all syscalls that are marked as
pointers and have some well known names ("filename", "pathname", etc)
and set the arg formatter to the one used for the "open" syscall in this
patch.
This implementation works for syscalls with just a string being copied
from userspace, for matching syscalls with more than one string being
copied via the same probe/trace point (vfs_getname) we need to extend
the vfs_getname probe spec to include the pointer too, but there are
some problems with that in 'perf probe' or the kernel kprobes code, need
to investigate before considering supporting multiple strings per
syscall.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xvuwx6nuj8cf389kf9s2ue2s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using it as a magic number, 1024, fix that.
Eventually we need to stop doing it per line, and do it per
arg, traversing the args at output time, to avoid the memmove()
calls that will be used in the next cset to replace pointers
present at raw_syscalls:sys_enter time with its contents that
appear at probe:vfs_getname time, before raw_syscalls:sys_exit
time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4sz3wid39egay1pp8qmbur4u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can later decide if we will store where to expand the
pathname once we are handling vfs_getname or if we should instead
just go on and straight away print the pointer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ytxk5s5jpc50wahffmlxgxuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were accessing trace->syscalls.events members even when that struct
wasn't initialized, i.e. --no-syscalls was specified on the command
line, fix it to show that, still in debug mode, when we have an event
qualifier list, i.e. when we actually are doing subset syscall tracing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 19867b6186 ("perf trace: Use event filters for the event qualifier list")
Link: http://lkml.kernel.org/n/tip-7980ym6vujgh3yiai0cqzc88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libtraceevent handler (session->tevent) is only initialized when
there are tracepoints in a perf.data event list, so do not call
pevent_set_function_resolve() in those cases, fixing a segfault.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xyynkucl5p4bcs13zi4i4b1f@git.kernel.org
Report-link: http://lkml.kernel.org/r/20150803174113.GA20282@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system (Arnaldo Carvalho de Melo).
- Adding build test for having ending double slash (Jiri Olsa)
- Introduce callgraph_set for callgraph option (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XBSW
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Force period term to overload global settings, i.e. previously this
command line:
$ perf record -e 'cpu/instructions,period=20000/',cycles -c 1000 sleep 1
would result in both events having a period equal to 1000, with the fix we
get something saner:
$ perf evlist -v | grep period
cpu/instructions,period=20000/: ... { sample_period, sample_freq }: 20000, ...
cycles: ... { sample_period, sample_freq }: 1000 ...
$
(Jiri Olsa)
Infrastructure changes:
- Use the dummy software event with freq=0 in the twatch.py python
binding example, to avoid disabling nohz. (Arnaldo Carvalho de Melo)
- Add some missing constants to the python binding. (Arnaldo Carvalho de Melo)
- Fix mismatched declarations for elf_getphdrnum, that happens
only in the corner case where this function is not found on
the system. (Arnaldo Carvalho de Melo)
- Add build test for having ending double slash. (Jiri Olsa)
- Introduce callgraph_set for callgraph option. (Kan Liang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pawel Moll reported build issue for having extra slash (/) at the end of
the prefix variable.
$ make prefix=/usr/local/
CC tests/attr.o
tests/attr.c: In function ‘test__attr’:
tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token
snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
^
tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token
}
^
tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
Adding automated test case for this.
Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150727182417.GD20509@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce callgraph_set to indicate whether the callgraph option was set
by user.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the command line option settings beats the per event period
settings:
With no global settings, we get per-event configuration:
$ perf record -e 'cpu/instructions,period=20000/' sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 20000 ...
With 'c' option period setup, we get 'c' option value:
$ perf record -e 'cpu/instructions,period=20000/' -c 1000 sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 1000 ...
This patch makes the per-event settings overload the global 'c' option
setup:
$ perf record -e 'cpu/instructions,period=20000/' -c 1000 sleep 1
$ perf evlist -v
... { sample_period, sample_freq }: 20000 ...
I think the making the per-event settings to overload any other config
makes more sense than current state. However it breaks the current
'period' term handling, which might cause some noise.. so let's see ;-).
Also fixing parse event tests with the new behaviour.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-3-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to overload any global settings for event and force user
specified term value. It will be useful for new time and backtrace
terms.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-2-git-send-email-kan.liang@intel.com
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The semantic associated in tools/perf/ with foo__delete(instance) is to
release all resources referenced by 'instance' members and then release
the memory for 'instance' itself.
The perf_session_env__delete() function isn't doing this, it just does
the first part, but the space used by 'instance' itself isn't freed, as
it is embedded in a larger structure, that will be freed at other stage.
For these cases we se foo__exit(), i.e. the usage is:
void foo__delete(foo)
{
if (foo) {
foo__exit(foo);
free(foo);
}
}
But when we have something like:
struct bar {
struct foo foo;
. . .
}
Then we can't really call foo__delete(&bar.foo), we must have this
instead:
void bar__exit(bar)
{
foo__exit(&bar.foo);
/* free other bar-> resources */
}
void bar__delete(bar)
{
if (bar) {
bar__exit(bar);
free(bar);
}
}
So just rename perf_session_env__delete() to perf_session_env__exit().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-djbgpcfo5udqptx3q0flwtmk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When HAVE_ELF_GETPHDRNUM_SUPPORT is false we trip on this problem:
CC /tmp/build/perf/util/symbol-elf.o
util/symbol-elf.c:41:12: error: static declaration of ‘elf_getphdrnum’ follows non-static declaration
static int elf_getphdrnum(Elf *elf, size_t *dst)
^
In file included from util/symbol.h:19:0,
from util/symbol-elf.c:8:
/usr/include/libelf.h:206:12: note: previous declaration of ‘elf_getphdrnum’ was here
extern int elf_getphdrnum (Elf *__elf, size_t *__dst);
^
MKDIR /tmp/build/perf/bench/
/home/git/linux/tools/build/Makefile.build:68: recipe for target '/tmp/build/perf/util/symbol-elf.o' failed
make[3]: *** [/tmp/build/perf/util/symbol-elf.o] Error 1
Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qcmekyfedmov4sxr0wahcikr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To not sample, what we want are just the PERF_RECORD_ lifetime events
for threads, using the default, PERF_TYPE_HARDWARE +
PERF_COUNT_HW_CYCLES and freq=1 (the default), makes perf reenable
irq_vectors:local_timer_entry, disabling nohz, not good for some use
cases where all we want is to get notifications when threads comes and
goes...
Fix it by using PERF_TYPE_SOFTWARE (no counter rotation) and
PERF_COUNT_SW_DUMMY (created by Adrian so that we could have access to
those PERF_RECORD_ goodies).
Reported-by: Luiz Fernando Capitulino <lcapitulino@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jaroslav Skarvada <jskarvad@redhat.com>
Cc: Jeremy Eder <jeder@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kfsijirfrs6xfhkcdxeoen06@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those were added to the kernel and tooling but we forgot to
expose them via the python binding, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-sg1m6t2c58gchidfce4hmitg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The python binding still doesn't provide symbol resolving facilities,
but the recent addition of the trace_event__register_resolver() function
made it add as a dependency the machine__resolve_kernel_addr() method,
that in turn drags all the symbol resolving code.
The problem:
[root@zoo ~]# perf test -v python
17: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 6853
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: machine__resolve_kernel_addr
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
[root@zoo ~]#
Fix it by requiring this function to receive the resolver as a
parameter, just like pevent_register_function_resolver(), i.e. do
not explicitely refer to an object file not included in
tools/perf/util/python-ext-sources.
[root@zoo ~]# perf test python
17: Try 'import perf' in python, checking link problems : Ok
[root@zoo ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: c3168b0db9 ("perf symbols: Provide libtraceevent callback to resolve kernel symbols")
Link: http://lkml.kernel.org/n/tip-vxlhh95v2em9zdbgj3jm7xi5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with a prefix ending with a slash, for example:
$ make prefix=/usr/local/
one of the perf tests fail to compile due to BUILD_STR macro mishandling
bindir_SQ string containing with two slashes:
-DBINDIR="BUILD_STR(/usr/local//bin)"
with the following error:
CC tests/attr.o
tests/attr.c: In function ‘test__attr’:
tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token
snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR);
^
tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token
}
^
tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
This patch works around the problem by "cleaning" the bindir string
using make's abspath function.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438092613-21014-1-git-send-email-pawel.moll@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The transaction length metrics in perf stat -T broke recently.
It would not match the metric correctly and always print K/sec.
This was caused by a incorrect update of the cycles_in_tx statistics.
Update the correct variable.
Also the check for zero division was reversed, which resulted in K/sec
being printed for no transactions. Fix this also up.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1438039491-22091-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option --show-switch-events to show switch events in a similar
fashion to --show-task-events and --show-mmap-events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracking event does not have to be the first event so replace
perf_evlist__first() with perf_evlist__id2evsel() which uses the event
ID to find the correct evsel.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support processing of PERF_RECORD_SWITCH events and
PERF_RECORD_SWITCH_CPU_WIDE events. There is a single
tools callback for them both so that the tool must
check the event type before using the extra members
in PERF_RECORD_SWITCH_CPU_WIDE.
There is still no way to select the events, though.
That is added in a subsequest patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1437471846-26995-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we now ask libtraceevent, the only user of this payload, to use
perf's symbol resolution routines, there is no need to carry about
~4.5MB per perf.data when we can get it from one of the places the perf
symbol resolution looks for that symtab (debuginfo, ~/.debug/,
/proc/kallsyms, --symfs, etc), using the kernel and modules build-ids to
make sure the right table is used.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-h89ituf9rso2rv1v7kjrbeda@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is not used anymore, since 'perf script' switched to asking
libtraceevent to use tools/perf's symbol resolution routines.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-4ilhofz4b7o8yokvutjt9yzz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
