Now PCM core accepts the NULL ioctl ops as default, and passing a proper
ioctl ops is no longer mandatory. Adjust soc_new_pcm() to allow also
the NULL for component ioctl ops, too.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191121190709.29121-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec may leave codec->relaxed_resume flag set even after
unbinding. Clear it unconditionally.
It's very unlikely that this actually matters in the real use case,
so just a fix for consistency.
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132624.5482-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The old Nvidia chips have multiple HD-audio codecs on the same
HD-audio controller, and this doesn't work as expected with the current
audio component binding that is implemented under the one-codec-per-
controller assumption; at the probe time, the driver leads to several
kernel WARNING messages.
For the proper support, we may change the pin2port and port2pin to
traverse the codec list per the given pin number, but this needs more
development and testing.
As a quick workaround, instead, this patch drops the binding in the
audio side for these legacy chips since the audio component support in
nouveau graphics driver is still not merged (hence it's basically
unused).
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205625
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132000.4460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The return from pnp_irq is an unsigned integer type resource_size_t
and hence the error check for a positive non-error code is always
going to be true. A check for a non-failure return from pnp_irq
should in fact be for (resource_size_t)-1 rather than >= 0.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: a9824c868a ("[ALSA] Add CS4232 PnP BIOS support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_usb_mixer_controls_badd() that parses UAC3 BADD profiles misses a
NULL check for the given interfaces. When a malformed USB descriptor
is passed, this may lead to an Oops, as spotted by syzkaller.
Skip the iteration if the interface doesn't exist for avoiding the
crash.
Fixes: 17156f23e9 ("ALSA: usb: add UAC3 BADD profiles support")
Reported-by: syzbot+a36ab65c6653d7ccdd62@syzkaller.appspotmail.com
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122112840.24797-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The s6i6_gen2_info.ports[] array had the Mixer and PCM port type
entries in the wrong place. Use designators to explicitly specify the
array elements being set.
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Tested-by: Markus Schroetter <project.m.schroetter@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191110134356.GA31589@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc236
for applying DELL1_MIC_NO_PRESENCE on Dell machines.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc256
for applying DELL1_MIC_NO_PRESENCE on Dell machines.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many PCI and other drivers performs snd_pcm_period_elapsed() simply in
its interrupt handler, so the sync_stop operation is just to call
synchronize_irq(). Instead of putting this call multiple times,
introduce the common card->sync_irq field. When this field is set,
PCM core performs synchronize_irq() for sync-stop operation. Each
driver just needs to copy its local IRQ number to card->sync_irq, and
that's all we need.
Link: https://lore.kernel.org/r/20191117085308.23915-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The standard programming model of a PCM sound driver is to process
snd_pcm_period_elapsed() from an interrupt handler. When a running
stream is stopped, PCM core calls the trigger-STOP PCM ops, sets the
stream state to SETUP, and moves on to the next step. This is
performed in an atomic manner -- this could be called from the interrupt
context, after all.
The problem is that, if the stream goes further and reaches to the
CLOSE state immediately, the stream might be still being processed in
snd_pcm_period_elapsed() in the interrupt context, and hits a NULL
dereference. Such a crash happens because of the atomic operation,
and we can't wait until the stream-stop finishes.
For addressing such a problem, this commit adds a new PCM ops,
sync_stop. This gets called at the appropriate places that need a
sync with the stream-stop, i.e. at hw_params, prepare and hw_free.
Some drivers already have a similar mechanism implemented locally, and
we'll refactor the code later.
Link: https://lore.kernel.org/r/20191117085308.23915-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently PCM ioctl ops is a mandatory field but almost all drivers
simply pass snd_pcm_lib_ioctl. For simplicity, allow to set NULL in
the field and call snd_pcm_lib_ioctl() as default.
Link: https://lore.kernel.org/r/20191117085308.23915-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support for the feature to automatically allocate
and free PCM buffers, so called "managed buffer allocation" mode.
It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and
snd_pcm_set_managed_buffer_all(), both of which correspond to the
existing preallocator helpers, snd_pcm_lib_preallocate_pages() and
snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used,
it not only performs the pre-allocation of buffers, but also it
manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params
ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core,
respectively. This allows drivers to drop the explicit calls of the
memory allocation / release functions, and it will be a good amount of
code reduction in the end of this patch series.
When the PCM substream is set to the managed buffer allocation mode,
the managed_buffer_alloc flag is set in the substream object. Since
some drivers want to know when a buffer is newly allocated or
re-allocated at hw_params callback (e.g. want to set up the additional
stuff for the given buffer only at allocation time), now PCM core
turns on buffer_changed flag when the buffer has changed.
The standard conversions to use the new API will be straightforward:
- Replace snd_pcm_lib_preallocate*() calls with the corresponding
snd_pcm_set_managed_buffer*(); the arguments should be unchanged
- Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls;
the check of snd_pcm_lib_malloc() returns should be replaced with
the check of runtime->buffer_changed flag.
- If hw_params or hw_free becomes empty, drop them from PCM ops
Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Show and change sound card timer source with read-write info
file in proc filesystem. Initial string can still be set as
module parameter.
The timer source string value can be changed at any time,
but it is latched by PCM substream open callback (the first one
for a particular cable). At this point it is actually used, that
is the string is parsed, and the timer is looked up and opened.
The timer source is set for a loopback card (the same as initial
setting by module parameter), but every cable uses the value,
current at the moment of open.
Setting the value to empty string switches the timer to jiffies.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-8-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
to do synchronous audio forwarding between hardware sound card and aloop
devices. Such an audio route could look like the following:
Sound card -> Loopback application -> ALSA loop device -> arecord
In this case the loopback device should use the sound timer of the sound
card. Without this patch the loopback application has to implement an
adaptive sample rate converter to align the different clocks of the
different ALSA devices.
The used timer can be selected by referring to a sound card, its device
and subdevice, when loading the module:
$ modprobe snd_aloop enable=1 timer_source=[<card>[.<dev>[.<subdev>]]]
<card> is the name (id) of the sound card or a card number.
<dev> and <subdev> are device and subdevice numbers (defaults are 0).
Empty string as a value of timer_source= parameter enables previous
functionality (using jiffies timer).
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-7-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit does not change the behaviour. It only separates the jiffies
timer specific implementation from the generic part.
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-5-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit only refactors the implementation. It does not change the
behaviour.
It is required to support other timers (e.g sound timer).
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-4-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is required for additional timer implementations which could detect
errors and want to throw them.
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-3-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Describe the unit of the variables used to calculate the hw pointer
depending on jiffies ticks.
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-2-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST support for GK104+ NVIDIA codecs.
GK104+ NVIDIA codecs support DP-MST audio. These codecs have 4
output converters and 4 pin widgets, with 4 device entries per pin
widget for a total of 16 device entries.
This patch moves the existing patch_nvhdmi() definition to
patch_nvhdmi_legacy(), used by pre-GK104 NVIDIA codecs. Redefine
patch_nvhdmi() to enable DP-MST support by setting codec->dp_mst and
spec->dyn_pcm_assign.
Introduce fresh logic for dynamic pcm assignment, making
sure that new pcm assignments are compatible with the legacy static
per_pin-pmc assignment that existed in the days before DP-MST.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-5-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch make it possible for non-acomp codecs to set
dyn_pcm_assign/dp_mst and get DP-MST audio support.
Document change notification HDA040-A for the Intel High Definition
Audio 1.0a specification introduces a Device Select verb for Digital
Display Pin Widgets that are multi-stream capable. This verb selects
a Device Entry that is used by subsequent Pin Widget verbs.
Once the Device Entry is selected, all subsequent Pin Widget verbs
controlling the sink device will be directed to the selected Device
Entry until the Device Select verb is updated with a new value.
These Pin Widget verbs include:
* Connection Select
* Get Connection List Entry
* Amplifier Gain/Mute
* Power State
* Pin Widget Control
* ELD Data
* DIP-Size
* DIP-Index
* DIP-Data
* DIP-XmitCtrl
* Content Protection Control
* ASP Channel Mapping
This patch adds calls to snd_hda_set_dev_select() to direct each of
these Pin Widget control verbs to the correct Device Entry.
snd_hda_get_connections() does not return per-device connection
list, therefore make use snd_hda_get_raw_connections() instead of
snd_hda_get_connections().
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-4-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST jack support which will be used on NVIDIA
platforms. Today, DP-MST audio is supported only if the codec has
acomp support. This patch makes it possible to add DP-MST support
for non-acomp codecs.
For the codecs supporting DP-MST audio, each pin can contain several
device entries. Each device entry is a virtual pin, described by
pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug
event handling, non-acomp codecs enable and register jack-detection
for every hdmi_spec_per_pin.
This patch updates every relevant function in hda_jack.h and its
implementation in hda_jack.c, to consider dev_id along with pin_nid.
Changes to the HD Audio specification to support DP-MST audio are
described in the Intel Document Change Notification (DCN) number
HDA040-A.
From HDA040-A, "For the case of multi stream capable Digital Display
Pin Widget, [the Get Pin Sense verb] can be used to read a specific
Device Entry state as reported in Get Device List Entry verb." This
patch updates the read_pin_sense() function to take the dev_id as an
argument and pass it as a parameter to the Get Pin Sense verb.
Bits 15 through 20 from the Unsolicited Response for intrinsic
events contain the index of the Device Entry that generated the
event. This patch updates the Unsolicited Response event handlers to
extract the device entry index from the response and pass it to
snd_hda_jack_tbl_get_from_tag().
This patch updates snd_hda_jack_tbl_new() to take a dev_id argument
and store it in the jack structure, and to make sure not to generate
a different tag when called more than once for the same nid.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
s/snd_hda_pin_sense/snd_hda_jack_pin_sense/g
This aligns the snd_hda_pin_sense function name with the names of
other functions in hda_jack.h.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-2-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove the workarounds added in commit fa763f1b28 ("ALSA:
hda - Force polling mode on CNL for fixing codec communication")
and commit a8d7bde23e ("ALSA: hda - Force polling mode on CFL
for fixing codec communication").
The workarounds are no longer needed after the more generic
change done in commit 2756d9143a ("ALSA: hda - Fix intermittent
CORB/RIRB stall on Intel chips"). This change applies to a larger
set of hardware and covers CFL and CNL as well.
Similar change was already done to SOF DSP HDA driver with
no regressions detected.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191115124449.20512-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Semantics of port#0 differ between ICL and TGL:
ICL port#0 -> never used for HDAudio
ICL port#1 -> should be mapped to first pin (0x04)
TGL port#0 -> typically not used, but HW has the support,
so should be mapped to first pin (0x04)
TGL port#1 -> should be mapped to 2nd pin (0x06)
Refactor the port mapping logic to allow to take the above
differences into account. Fixes issues with HDAudio on some
TGL platforms.
Co-developed-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191115124449.20512-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The unit descriptor validation may lead to a probe error when the
device provides a buggy descriptor or the validator detected
incorrectly. For identifying such an error and band-aiding, give a
new module option, skip_validation. With this option, the driver
ignores the validation errors with the hexdump of the unit
descriptor, so we can check it in a bit more details.
Link: https://lore.kernel.org/r/20191114165613.7422-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new flag in hdmi_spec to indicate the Intel platform-
specific fixups so that we can get rid of the lengthy codec ID
checks. The flag is set in intel_hsw_common_init() commonly.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111190937.19186-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced unit descriptor validation had some bug for
processing and extension units, it counts a bControlSize byte twice so
it expected a bigger size than it should have been. This seems
resulting in a probe error on a few devices.
Fix the calculation for proper checks of PU and EU.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 60849562a5 ("ALSA: usb-audio: Fix possible NULL
dereference at create_yamaha_midi_quirk()") added NULL checks in
create_yamaha_midi_quirk(), but there was an overlook. The code
allows one of either injd or outjd is NULL, but the second if check
made returning -ENODEV if any of them is NULL. Fix it in a proper
form.
Fixes: 60849562a5 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the nullity check for `substream->runtime` is outside of the lock
region, it is possible to have a null runtime in the critical section
if snd_pcm_detach_substream is called right before the lock.
Signed-off-by: paulhsia <paulhsia@chromium.org>
Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.
This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:
[ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: Henry Lin <henryl@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code change in commit 6974f8ad44 ("ALSA: pci: Avoid non-standard
macro usage") contained an incorrect conversion, which left the
invalid pointer passed to the allocator for au88x0 driver. Fix it.
Fixes: 6974f8ad44 ("ALSA: pci: Avoid non-standard macro usage")
Link: https://lore.kernel.org/r/20191112143243.22216-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A silly mistake was made while applying the fix for potential races in
commit 6a34367e52 ("ALSA: timer: Fix possible race at assigning a
timer instance"): when a slave PCM is opened and succeeds, it doesn't
return but proceeds to the master timer open code instead. Plug the
hole and beautify a bit.
Fixes: 6a34367e52 ("ALSA: timer: Fix possible race at assigning a timer instance")
Reported-by: syzbot+4476917c053f60112c99@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191111173642.6093-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply same logic to pin setup as on previous platforms. Fixes
errors in HDMI/DP playback.
Tested with both snd-hda-intel and SOF drivers.
Fixes: 9a11ba7388 ("ALSA: hda: hdmi - add Tigerlake support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111133838.21213-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.
Add the missing return error check for fixing that.
Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper is no longer referred after the recent code refactoring.
Drop the export for saving some bits and future misuse.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191108094641.20086-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro. The macro didn't give any better readability.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Since it requires the specific buffer type (SNDRV_DMA_TYPE_VMALLOC),
it's set in the pcm_new ops now.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (commit 08422d2c55: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For non-x86 architectures, SNDRV_DMA_TYPE_DEV_UC should be treated
equivalent with SNDRV_DMA_TYPE_DEV, where the default mmap handler
still checks only about SNDRV_DMA_TYPE_DEV. Make the check more
proper.
Note that all existing users of *_UC buffer types are x86-only, so
this doesn't fix any bug, but just for consistency.
Fixes: 42e748a0b3 ("ALSA: memalloc: Add non-cached buffer type")
Link: https://lore.kernel.org/r/20191108165626.5947-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
