Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An error occurs during parsing more than one ext_data from the mailbox, because
of invalid data offset handling. Fix by removing the incorrect duplicate
increment of the offset.
The return value is also reset in the switch case. This does not change the
behavior but improves readability - there is no longer a need to check what the
return value of get_ext_windows is.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Bartosz Kokoszko <bartoszx.kokoszko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added warning log when found some unknown FW boot ext header,
to improve debuggability.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In normal sound case all DAIs are detected as CPU-Codec.
simple_dai_link_of supports the presence of a platform but it counts
it as a CPU DAI resulting in the creation of an extra link.
Adding a platform property to a link description like:
simple-audio-card,dai-link {
cpu {
sound-dai = <&sai1>;
};
plat {
sound-dai = <&dsp>;
};
codec {
sound-dai = <&wm8960>;
}
will result in the creation of two links:
* sai1 <-> wm8960
* dsp <-> wm8960
which is obviously not what we want. We just want one single link
with:
* sai1 <-> wm8960 (and platform set to dsp).
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191209135353.17427-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.
Fix that by checking the status and rejecting the topology on error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.
Fix that by checking the return status and free the memory in case
of an error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the drv_name and tplg_filename for nocodec
machine driver in sof_machine_check().
This means the sof_nocodec_setup() does not
need the mach, plat_data or desc arguments any longer.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is only set but never used. Let's remove
it to make code cleaner.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove nocodec_fw_filename from struct sof_dev_desc
as it is not longer needed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, SOF probes machine drivers by creating a platform device
and passing the machine description as private data.
This is driven by the ACPI restrictions. Ideally, ACPI tables
should contain the description for the machine driver. This is
not possible because ACPI tables are frozen and used on multiple
OS-es (e.g Windows).
In the case of Device Tree we don't have this restriction, so we
choose to probe the machine drivers by creating a DT node as is
the standard ALSA way.
This patch makes the probing of machine drivers from SOF
core optional allowing for Device Tree platforms to decouple
the SOF core from machine driver probing.
Along with this, it also consolidates the machine driver selection
for Intel platforms by defining optional ops for selecting the machine
driver based on the ACPI match for HDA and non-HDA platforms and
setting the mach params.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The machine driver selection for HDA platforms will be
consolidated and moved out of the SOF DSP
probe callback. In preparation for that, modify the
signature for hda_codec_probe_bus() to pass the
hda_codec_use_common_hdmi as a variable while probing the
HDA codecs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the audio-specific code in the core,
audio-specific logic in the top-level PM callbacks
and the core header files into a separate file
(sof-audio.*) in preparation for adding an
audio client device.
In the process of moving all structure definitions
for widget, routes, pcm's etc, the snd_sof_dev
member in all these structs is replaced with
the snd_soc_component member. Also, use the component
device instead of the snd_sof_dev device wherever
possible in the PCM component driver,
control IO functions and the topology parser as the
component device will be moved over to the client
device later on.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the FW filename is obtained from the ACPI matching
table when determining which machine driver to use. In
preparation for making the machine driver ACPI match optional
for Device Tree platforms and moving the machine driver selection
out of the SOF core, this patch introduces the default_fw_filename
member in struct sof_dev_desc.
Once the machine driver selection is moved out of SOF core,
the nocodec_fw_filename will become obsolete and will be removed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some platforms, the refcount is explicitly incremented
to prevent it from entering runtime suspend. This
should be be done during probe in the core instead
of being done in the PCM driver.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature for snd_sof_create_page_table to
take struct device pointer as an argument instead of
struct snd_sof_dev as this will be used by both the SOF
core device and its clients. Also, move the definition
out of core.c to utils.c.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204211556.12671-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The long card name might be used in GUI. This information should be hidden.
Add CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES configuration option.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191204211556.12671-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the control interface (field 'components' in the info structure)
to pass the I/O configuration details. The goal is to replace
the card long name with this.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191204211556.12671-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is required for the auto-detection in the user space (for UCM).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191204211556.12671-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai codec needs to ensure that on one dai is used at any time.
This is currently protected by bit atomic operation. With this change,
it done with a mutex instead.
This change is not about functionality or efficiency. It is done with
the hope that it help maintainability in the future.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20191206103542.485224-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a kernel-doc warning in soc-core.c by adding notation for
@legacy_dai_naming.
../sound/soc/soc-core.c:2509: warning: Function parameter or member 'legacy_dai_naming' not described in 'snd_soc_register_dai'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/2215ee04-e870-5eea-a00c-9a5caf06faae@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code uses two handlers for a shared edge-based MSI interrupts.
In corner cases, interrupts are lost, leading to IPC timeouts. Those
timeouts do not appear in legacy mode.
This patch merges the two handlers and threads into a single one, and
simplifies the mask/unmask operations by using a single top-level mask
(Global Interrupt Enable). The handler only checks for interrupt
sources using the Global Interrupt Status (GIS) field, and all the
actual work happens in the thread. This also enables us to remove the
use of spin locks. Stream events are prioritized over IPC ones.
This patch was tested with HDaudio and SoundWire platforms, and all
known IPC timeout issues are solved in MSI mode. The
SoundWire-specific patches will be provided in follow-up patches,
where the SoundWire interrupts are handled in the same thread as IPC
and stream interrupts.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204212859.13239-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When McASP is master the bclk can be generated from two main source:
AUXCLK: functional clock for McASP or
AHCLK: from external source or internal mux in dra7x family
With this patch it is possible to select between the two source. The patch
is not breaking existing machine drivers since historically the clk_id was
ignored and left as 0 in all cases.
When output clock is configured - which can be only the AHCLK, we select
the AUXCLK as source for the internal HCLK. In this case the HCLK rate is
the same as the output clock.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191204192005.31210-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "DAC mux" DAPM widget in CS42l51 audio codec routes,
to support DAC mux control and to remove error trace
"DAC Mux has no paths" at widget creation.
Note: ADC path of DAC mux is not routed in this patch.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191203141627.29471-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to store the inverted DALIGN values in the table, as
they can easily be calculated at run-time. This also protects against
the introduction of inconsistencies between normal and inverted values
by a future table modification.
Reorder the two subexpressions in the AND check, to perform the least
expensive check first.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191202155834.22582-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Chip supports soft stepping of volume changes and it is enabled by
default.
This patch adds a control for it, so it could be either made slower
(two sample periods per step instead of one), or disabled.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20191129132719.11603-1-nikita.yoush@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet, there are some registers can only be changed
when SHDN is 0. Changing these settings during SHDN = 1 can compromise
device stability and performance specifications.
Saves SHDN before writing to these sensitive registers and restores SHDN
afterward.
Here is the register list codec driver of max98090 wants to change:
M98090_REG_QUICK_SYSTEM_CLOCK 0x04
M98090_REG_QUICK_SAMPLE_RATE 0x05
M98090_REG_DAI_INTERFACE 0x06
M98090_REG_DAC_PATH 0x07
M98090_REG_MIC_DIRECT_TO_ADC 0x08
M98090_REG_LINE_TO_ADC 0x09
M98090_REG_ANALOG_MIC_LOOP 0x0A
M98090_REG_ANALOG_LINE_LOOP 0x0B
M98090_REG_SYSTEM_CLOCK 0x1B
M98090_REG_CLOCK_MODE 0x1C
M98090_REG_CLOCK_RATIO_NI_MSB 0x1D
M98090_REG_CLOCK_RATIO_NI_LSB 0x1E
M98090_REG_CLOCK_RATIO_MI_MSB 0x1F
M98090_REG_CLOCK_RATIO_MI_LSB 0x20
M98090_REG_MASTER_MODE 0x21
M98090_REG_INTERFACE_FORMAT 0x22
M98090_REG_TDM_CONTROL 0x23
M98090_REG_TDM_FORMAT 0x24
M98090_REG_IO_CONFIGURATION 0x25
M98090_REG_FILTER_CONFIG 0x26
M98090_REG_INPUT_ENABLE 0x3E
M98090_REG_OUTPUT_ENABLE 0x3F
M98090_REG_BIAS_CONTROL 0x42
M98090_REG_DAC_CONTROL 0x43
M98090_REG_ADC_CONTROL 0x44
M98090_REG_DRC_TIMING 0x33
M98090_REG_DRC_COMPRESSOR 0x34
M98090_REG_DRC_EXPANDER 0x35
M98090_REG_DSP_FILTER_ENABLE 0x41
M98090_REG_EQUALIZER_BASE 0x46
M98090_REG_RECORD_BIQUAD_BASE 0xAF
M98090_REG_DIGITAL_MIC_ENABLE 0x13
M98090_REG_DIGITAL_MIC_CONFIG 0x14
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191128151908.180871-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LS1028A SoC uses the same interrupt line for adjacent SAIs. Use
IRQF_SHARED to be able to use these SAIs simultaneously.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191128223802.18228-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
HP output driver has two parameters that can be configured to reduce
pop noise: power-on delay and ramp-up step time. Two new kcontrols
have been added to set these parameters.
Also have to alter timeout in aic31xx_dapm_power_event() because default
timeout does fire when higher supported power-on delay are configured.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20191128135447.26458-1-nikita.yoush@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Add the following helper in mtk-afe-fe-dai to control
to control mtk_memif
- mtk_memif_set_enable
- mtk_memif_set_disable
- mtk_memif_set_addr
- mtk_memif_set_channel
- mtk_memif_set_rate
- mtk_memif_set_rate_substream
- mtk_memif_set_format
- mtk_memif_set_pbuf_size
2.extend mtk_base_memif_data struct for new platform
Signed-off-by: Eason Yen <eason.yen@mediatek.com>
Link: https://lore.kernel.org/r/1573814926-15805-2-git-send-email-eason.yen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 019033c854 ("ASoC: Intel: hdac_hdmi:
add Icelake support").
Icelake HDMI audio is supported by the HDMI codec driver,
which can be used both in non-DSP (legacy HDA) and with
DSP (SOF) configurations.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126145304.24204-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify Kconfig rules for machine drivers used by SOF to pick
SND_HDA_CODEC_HDMI by default if other conditions are met. For
shared machine drivers used also by older SST driver, keep using
HDAC_HDMI.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126145304.24204-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the common HDMI driver by default if the codec driver is
selected in kernel build.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126145304.24204-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data and updates quirk info
for tgl with max98357a speaker amp and ALC5682 headset codec.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126143205.21987-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TGL supports one more HDMI DAI than previous models.
So add quirk support for number of HDMI DAI's.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126143205.21987-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are many paths to soc_free_pcm_runtime which can both have and
have not yet inited the workqueue yet. When we flush the queue when we
have not yet inited the queue we cause warnings to be printed.
An example is soc_cleanup_card_resources which is called by
snd_soc_bind_card which has multiple failure points before and after
soc_link_init -> soc_new_pcm which is where the queue is inited.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191128011358.39234-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the Teclast X89 quirk was added we did not have jack-detection
support yet.
Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are cases where we fail before we reach soc_new_pcm which would
init the workqueue. When we fail we attempt to flush the queue which
generates warnings from the workqueue subsystem when we have not inited
the queue. Solution is to use a proxy function to get around this issue.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191203173007.46504-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix build error:
sound/soc/intel/atom/sst/sst.c: In function intel_sst_interrupt_mrfld:
sound/soc/intel/atom/sst/sst.c:93:5: error: implicit declaration of function memcpy_fromio;
did you mean memcpy32_fromio? [-Werror=implicit-function-declaration]
memcpy_fromio(msg->mailbox_data,
^~~~~~~~~~~~~
memcpy32_fromio
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191128135853.8360-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:
Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.
max98090_interrupt max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
restart max98090 codec
receive ULK INT
assert ULK == 0
schedule max98090_pll_work (1).
In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.
max98090_interrupt max98090_pll_work max98090 codec
----------------------------------------------------------------------
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
schedule max98090_pll_work
restart max98090 codec
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
read 0x01
assert ULK == 0 (2).
In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register. max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.
There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.
Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously. Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.
Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler. However, it could only punish the jack detection by extra
10~12 msec.
Adopts option B which is the better solution overall.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet, PLL lock time typically takes 2 msec and
at most takes 7 msec.
Check the lock status every 1 msec and exit the workaround if PLL is
locked.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.
As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec. Notably, there is no suggested hold
time for SHDN off.
On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on. Removes
the msleep().
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The simple-card tries to signal the codec to disable rate constraints,
see commit 2458adb8f9 ("SoC: simple-card-utils: set 0Hz to sysclk when
shutdown"). This wasn't handled by the codec, instead it would set the
FLL frequency to 0Hz which isn't working. Since we don't have any rate
constraints just ignore this request.
Fixes: 13409d27cb ("ASoC: wm8904: configure sysclk/FLL automatically")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191122232532.22258-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
If CONFIG_SPI is n, SND_SOC_RT5677_SPI also is n, building fails:
sound/soc/codecs/rt5677.o: In function `rt5677_irq':
rt5677.c:(.text+0x2dbf): undefined reference to `rt5677_spi_hotword_detected'
sound/soc/codecs/rt5677.o: In function `rt5677_dsp_work':
rt5677.c:(.text+0x3709): undefined reference to `rt5677_spi_write'
This adds stub helpers to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 461c623270 ("ASoC: rt5677: Load firmware via SPI using delayed work")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191127082145.6100-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link unload now fails for ESAI/SAI DAIs with:
"error: invalid DAI type 6" because DAI type is not
properly handled.
Fix this by correctly handling cases where type is ESAI or SAI.
Fixes: a4eff5f86c ("ASoC: SOF: imx: Read ESAI parameters and send them to DSP")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126141606.21650-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shim registers in BYT/CHT/BSW are 64bits based, correct the
copy/paste (from bdw.c where the shim registers are 32bits based) error
in byt_dump().
Fixes: 3a9e204d4e ("ASoC: SOF: Intel: Add context data to any IPC timeout")
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126141533.21601-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some usages only call startup and shutdown without setting hw_params
(e.g. arecord --dump-hw-params). If we don't enable clk in startup, it
will cause ref count error because the clk will be disabled in shutdown.
For this reason, we should move enabling clk from hw_params to startup.
In addition, the hw_params is fixed in this driver(48000 rate, 2
channels, S16_LE format) so we don't need to change the clk rate after
the hw_params is set.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Akshu Agrawal <akshu.agarawal@amd.com>
Link: https://lore.kernel.org/r/20191126075424.80668-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been some significant changes in the core side, both for
ALSA and ASoC, while lots of development have been seen in SOF, as
well as many small fixes/improvements for ASoC codecs and platforms.
Below is a highlight in this cycle:
Core:
- The unification of PCM vmalloc buffer allocation helpers into the
standard API
- Clean up of the default PCM mmap handling for vmalloc & SG-buffer
- Fix potential races at ALSA timer open
- A few new PCM API extensions; just preliminary core changes, the
actual changes in drivers will be merged in 5.6
- Continued ASoC componentization works; now almost everything is a
common ASoC component object. A lot of refactoring and
simplification have been done along with it.
ASoC:
- Many fixes to the Sound Open Firmware (SOF) code
- Wake on voice support for Chromebooks
- SPI support and trigger word detection for RT5677
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770
HD-audio:
- Improved Intel DSP configuration / probe code for SOF
- Plumbing the legacy HD-audio driver with Intel SOF HDMI
- DP-MST support for Nvidia HDMI codecs
- Realtek quirks cleanups and new additions as usual
Others:
- Lots of refactoring and cleanups for FireWire; period-size sharing,
h/w IRQ interval configuration, clock recovery improvements, etc
- USB-audio: Scarlett mixer quirks
- Cleanups of PCM calls in various drivers (including media and USB)
to adapt the core API changes
-----BEGIN PGP SIGNATURE-----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=xGUt
-----END PGP SIGNATURE-----
Merge tag 'sound-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been some significant changes in the core side, both for
ALSA and ASoC, while lots of development have been seen in SOF, as
well as many small fixes/improvements for ASoC codecs and platforms.
Below is a highlight in this cycle:
Core:
- The unification of PCM vmalloc buffer allocation helpers into the
standard API
- Clean up of the default PCM mmap handling for vmalloc & SG-buffer
- Fix potential races at ALSA timer open
- A few new PCM API extensions; just preliminary core changes, the
actual changes in drivers will be merged in 5.6
- Continued ASoC componentization works; now almost everything is a
common ASoC component object. A lot of refactoring and
simplification have been done along with it.
ASoC:
- Many fixes to the Sound Open Firmware (SOF) code
- Wake on voice support for Chromebooks
- SPI support and trigger word detection for RT5677
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770
HD-audio:
- Improved Intel DSP configuration / probe code for SOF
- Plumbing the legacy HD-audio driver with Intel SOF HDMI
- DP-MST support for Nvidia HDMI codecs
- Realtek quirks cleanups and new additions as usual
Others:
- Lots of refactoring and cleanups for FireWire; period-size sharing,
h/w IRQ interval configuration, clock recovery improvements, etc
- USB-audio: Scarlett mixer quirks
- Cleanups of PCM calls in various drivers (including media and USB)
to adapt the core API changes"
* tag 'sound-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits)
ALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling
ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC
ALSA: aloop: Fix dependency on timer API
ASoC: DMI long name - avoid to add board name if matches with product name
ASoC: improve the DMI long card code in asoc-core
ASoC: rsnd: fix DALIGN register for SSIU
ALSA: aloop: Avoid unexpected timer event callback tasklets
ALSA: aloop: Remove redundant locking in timer open function
ASoC: component: Add sync_stop PCM ops
ASoC: pcm: Make ioctl ops optional
ALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding
ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs
ALSA: cs4236: fix error return comparison of an unsigned integer
ALSA: usb-audio: Fix NULL dereference at parsing BADD
ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Move some alc236 pintbls to fallback table
ALSA: hda/realtek - Move some alc256 pintbls to fallback table
ALSA: docs: Update about the new PCM sync_stop ops
ALSA: pcm: Add card sync_irq field
...
Lots of stuff going on in the core for SPI this time around, the two big
changes both being around time in different forms:
- A rework of delay times from Alexandru Ardelean which makes the ways
in which they are specified more consistent between drivers so that
what's available to clients is less dependent on the hardware
implementation.
- Support for PTP timestamping of transfers from Vladimir Oltean,
useful for use with precision clocks with SPI control interfaces.
- Big cleanups for the Atmel, PXA2xx and Zynq QSPI drivers.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3b1ogTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NBpB/0Rh81T/xG0moEM6qyCqjriD8rQKfA7
l7r7pNPCXCTPnVe2mfSLrlu6ETi8tG1iVYGPSEQmo5JnlgpoOvr0SVvQMej0ceB+
jn3H31JgfvryMr99AFEsRN8N6GkY1dLlTV/5edKRTkut++tqlYD/G99bn3K7IlxW
oN8le+fCDuF78mWGDEdClwuZ5ZDiZtWbRu01Q6ooVVZz3XLlLZPtgKH2qlwoVJ9r
cuwnE2e3wce5Hq/JwAFnG2pUYIjKNd00/VxK640pU1dJ/LeqekH0Xe4ZoCr4X0zE
8c+srra1yefAiDIPNG0v+exZePuu53tbEJylVVefOlrGCTa+nbJBioH3
=+5en
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Lots of stuff going on in the core for SPI this time around, the two
big changes both being around time in different forms:
- A rework of delay times from Alexandru Ardelean which makes the
ways in which they are specified more consistent between drivers so
that what's available to clients is less dependent on the hardware
implementation.
- Support for PTP timestamping of transfers from Vladimir Oltean,
useful for use with precision clocks with SPI control interfaces.
- Big cleanups for the Atmel, PXA2xx and Zynq QSPI drivers"
* tag 'spi-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
dt-bindings: spi: Convert stm32 QSPI bindings to json-schema
spi: pic32: Retire dma_request_slave_channel_compat()
spi: Fix Kconfig indentation
spi: mediatek: add SPI_CS_HIGH support
spi: st-ssc4: add missed pm_runtime_disable
spi: tegra20-slink: add missed clk_unprepare
spi: tegra20-slink: Use dma_request_chan() directly for channel request
spi: tegra114: Use dma_request_chan() directly for channel request
spi: s3c64xx: Use dma_request_chan() directly for channel request
spi: qup: Use dma_request_chan() directly for channel request
spi: pl022: Use dma_request_chan() directly for channel request
spi: imx: Use dma_request_chan() directly for channel request
spi: fsl-lpspi: Use dma_request_chan() directly for channel request
spi: atmel: Use dma_request_chan() directly for channel request
spi: at91-usart: Use dma_request_chan() directly for channel request
spi: fsl-cpm: Correct the free:ing
spi: Fix regression to return zero on success instead of positive value
spi: pxa2xx: Add missed security checks
spi: nxp-fspi: Use devm API to fix missed unregistration of controller
spi: omap2-mcspi: Remove redundant checks
...
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3bzrQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LkMB/4/MkpN4F2WudNCKgmYay2gw3hq8aOR
5Xh/SE6N3BEgBpQiMEUdePRT6LqnQMsSpOaUoKfd4nFvCyLaV7itaYzQuUpo+UJ/
a4UDHJPVfrDJeFghWqSngfEW/N66mpO3UuAvhSRTR3ku0T31v9FkcLsMbdxVUpLC
ablSaFfPCOtTQOsG9blRUL/GAWUhGzPI/Hl4VldS0FvKDmMDY2fxt7QxXRaEYItc
i1Uthklxd0BfRmDqv0WEpduUhbwzg6Uir9pXSisux7DpMk1Li0IyPST5UcRl0Zf4
CKL/qfdQANpufj9kGmrlCOnXB9P5/XYVwfYV430WqMyw0QaOzzSrxT7C
=CZ/+
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.5
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current code:
LENOVO-20QE000VMC-ThinkPadX1Carbon7th-20QE000VMC
With the patch:
LENOVO-20QE000VMC-ThinkPadX1Carbon7th
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191120174435.30920-2-perex@perex.cz
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add append_dmi_string() function and make the code more readable.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191120174435.30920-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The current driver only sets 0x76543210 and 0x67452301 for DALIGN.
This doesn’t work well for TDM split and ex-split mode for all SSIU.
This patch programs the DALIGN registers based on the SSIU number.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Fixes: a914e44693 ("ASoC: rsnd: more clear rsnd_get_dalign() for DALIGN")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191121111023.10976-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the support of the new PCM sync_stop ops in ASoC component.
It's optional and can be NULL unless you need the sync operation.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191121190709.29121-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now PCM core accepts the NULL ioctl ops as default, and passing a proper
ioctl ops is no longer mandatory. Adjust soc_new_pcm() to allow also
the NULL for component ioctl ops, too.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191121190709.29121-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191120133252.6365-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 957ce0c6b8 (ASoC: soc-pcm: check symmetry after
hw_params).
That commit cause soc_pcm_params_symmetry can't take effect.
cpu_dai->rate, cpu_dai->channels and cpu_dai->sample_bits
are updated in the middle of soc_pcm_hw_params, so move
soc_pcm_params_symmetry to the end of soc_pcm_hw_params is
not a good solution, for judgement of symmetry in the function
is always true.
FIXME:
According to the comments of that commit, I think the case
described in the commit should disable symmetric_rates
in Back-End, rather than changing the position of
soc_pcm_params_symmetry.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1573555602-5403-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RST (reset-gpios) is low active so the driver must handle it
accordingly.
Add comments to explain clearly how the line is used.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191120131753.6831-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This ASCII string can carry additional information about
soundcard components or configuration. Add the possibility
to set this string via the ASoC card.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191119174933.25526-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-topology adds extra dai_link by using snd_soc_add_dai_link(),
and removes it by snd_soc_romove_dai_link().
This snd_soc_add/remove_dai_link() and/or its related
functions are unbalanced before, and now, these are balance-uped.
But, it finds the random operation issue, and it is reported by
Pierre-Louis.
When card was released, topology will call snd_soc_remove_dai_link()
via (A).
static void soc_cleanup_card_resources(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link, *_link;
/* This should be called before snd_card_free() */
(A) soc_remove_link_components(card);
/* free the ALSA card at first; this syncs with pending operations */
if (card->snd_card) {
(B) snd_card_free(card->snd_card);
card->snd_card = NULL;
}
/* remove and free each DAI */
(X) soc_remove_link_dais(card);
for_each_card_links_safe(card, link, _link)
(C) snd_soc_remove_dai_link(card, link);
...
}
At (A), topology calls snd_soc_remove_dai_link().
Then topology rtd, and its related all data are freed.
Next, (B) is called, and then, pcm->private_free = soc_pcm_private_free()
is called.
static void soc_pcm_private_free(struct snd_pcm *pcm)
{
struct snd_soc_pcm_runtime *rtd = pcm->private_data;
/* need to sync the delayed work before releasing resources */
flush_delayed_work(&rtd->delayed_work);
snd_soc_pcm_component_free(rtd);
}
Here, it gets rtd via pcm->private_data.
But, topology related rtd are already freed at (A).
Normal sound card has no damage, becase it frees rtd at (C).
These are finalizing rtd related data.
Thus, these should be called when rtd was freed, not sound card
was freed. It is very natural and understandable.
In other words, pcm->private_free = soc_pcm_private_free()
is no longer needed.
Extra issue is that there is zero chance to call
soc_remove_dai() for topology related dai at (X).
Because (A) removes rtd connection from card too, and,
(X) is based on card connected rtd.
This means, (X) need to be called before (C) (= for normal sound)
and (A) (= for topology).
Now, I want to focus this patch which is the reason why
snd_card_free() = (B) is located there.
commit 4efda5f213
("ASoC: Fix use-after-free at card unregistration")
Original snd_card_free() was called last of this function.
But moved to top to avoid use-after-free issue.
The issue was happen at soc_pcm_free() which was pcm->private_free,
today it is updated/renamed to soc_pcm_private_free().
In other words, (B) need to be called before (C) (= for normal sound)
and (A) (= for topology), because it needs (not yet freed) rtd.
But, (A) need to be called before (B),
because it needs card->snd_card pointer.
If we call flush_delayed_work() and snd_soc_pcm_component_free()
(= same as soc_pcm_private_free()) when rtd was freed (= (C), (A)),
there is no reason to call snd_card_free() at top of this function.
It can be called end of this function, again.
But, in such case, it will likely break unbind again, as Takashi-san
reported. When unbind is performed in a busy state, the code may
release still-in-use resources.
At least we need to call snd_card_disconnect_sync() at the first place.
The final code will be...
static void soc_cleanup_card_resources(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link, *_link;
if (card->snd_card)
(Z) snd_card_disconnect_sync(card->snd_card);
(X) soc_remove_link_dais(card);
(A) soc_remove_link_components(card);
for_each_card_links_safe(card, link, _link)
(C) snd_soc_remove_dai_link(card, link);
...
if (card->snd_card) {
(B) snd_card_free(card->snd_card);
card->snd_card = NULL;
}
}
To avoid release still-in-use resources,
call snd_card_disconnect_sync() at (Z).
(X) is needed for both non-topology and topology.
topology removes rtd via (A), and
non topology removes rtd via (C).
snd_card_free() is no longer related to use-after-free issue.
Thus, locating (B) is no problem.
Fixes: df95a16d2a ("ASoC: soc-core: fix RIP warning on card removal")
Fixes: bc7a9091e5 ("ASoC: soc-core: add soc_unbind_dai_link()")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87o8xax88g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch uses rtd instead of pcm at snd_soc_pcm_component_new/free()
parameter.
This is prepare for dai_link remove bug fix on topology.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnhqx89j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the Acer Switch 10 SW5-012 quirk was added we did not have
jack-detection support yet; and the builtin microphone selection of
the original quirk is wrong too.
Fix the microphone-input quirk and add jack-detection info so that the
internal-microphone and headphone/set jack on the Switch 10 work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191119145138.59162-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose mixer control API for reading and writing controls from the kernel.
This API can be used by ALSA kernel drivers with ADSP support to
read and write firmware-defined memory regions.
Signed-off-by: Li Xu <li.xu@cirrus.com>
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1573847653-17094-2-git-send-email-david.rhodes@cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tlv320aic31xx devices allow to adjust the output common-mode voltage
for best analog performance. The datasheet states that the common mode
voltage should be set to be <= AVDD/2.
This changes allows to configure the output common-mode voltage via a DT
property. If the property is absent the voltage is automatically chosen
as the highest voltage below/equal to AVDD/2.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191118151207.28576-1-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The manifest information is different between CNL, CML and CFL platforms
hence we need to load different files.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222901.19892-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 130d3e9077 (Fix CFL and CML FW nocodec binary names.) broke the
build in some configurations as it depends on changes in the development
branch, revert it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case the RST line is connected to a GPIO line it needs to be pulled high
when the driver probes to be able to use the codec.
Add support also for cases when more than one codec is is controlled by the
same GPIO line by requesting the gpio with GPIOD_FLAGS_BIT_NONEXCLUSIVE.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191113124734.27984-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver forgets to call pm_runtime_disable in remove and
probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191118073707.28298-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver misses calls to pm_runtime_disable and regulator_bulk_disable
in remove and a call to free_irq in probe failure.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118073633.28237-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs also support the flac decoder, so add support for FLAC
decoder and convert the snd_dec_flac params to qdsp format.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191115102705.649976-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect flac config to be set for flac decoders, so add the
API to program the flac config to the DSP
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191115102705.649976-3-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to switching the HV to LV mode while stopping playback,
the charge pump capacitor will be discharged to the source of the pump circuit.
Therefore, this patch removed the event control.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191118091624.18699-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_request_slave_channel_reason() is:
#define dma_request_slave_channel_reason(dev, name) \
dma_request_chan(dev, name)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191113095445.3211-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_request_slave_channel_reason() is:
#define dma_request_slave_channel_reason(dev, name) \
dma_request_chan(dev, name)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191113095445.3211-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_cleanup_card_resources() will call card->remove(), but it should be
called if card->probe() or card->late_probe() are called.
snd_soc_bind_card() might be error before calling
card->probe() / card->late_probe().
In that time, card->remove() will be called.
This patch adds card_probed parameter to judge it.
Fixes: bfce78a559 ("ASoC: soc-core: tidyup soc_init_dai_link()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/87o8xg4ltr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
snd_soc_bind_card() is calling snd_soc_dapm_init() for both
card and component.
Let's call paired snd_soc_dapm_shutdown() at paired
soc_cleanup_card_resources().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r22c4lub.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code assumes that the power is turned off in
SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't
turned off and the registers are not reset to their default values but
the regcache is still marked as dirty. Thus a value might not be written
to the hardware if it is set to the default value. Do a software reset
before turning off the power to make sure the registers are always reset
to their default states.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_bind_card() is calling many initialize functions
for each card / link / dai / aux etc, etc, etc...
When error happen, the message is indicated at snd_soc_bind_card(),
not at each functions.
But, only soc_probe_aux_devices() case is indicating error at functions,
not at snd_soc_bind_card().
It is not an issue, but unbalanced.
This patch moves error message to snd_soc_bind_card().
Also avoids deep-nested code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfsthkw9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
having both soc_bind_card() and snd_soc_instantiate_card() is
very confusable. Let's merge these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mud9hkwj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
having both soc_remove_component() and soc_cleanup_component() is
very confusable. Let's merge these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8xphkwt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to separete snd_soc_remove_dai_link() and
soc_unbind_dai_link() anymore. Let's merge these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pni5hkx1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to separete snd_soc_add_dai_link() and
soc_bind_dai_link() anymore. Let's merge these.
One note is that before this patch, it adds list (A)
eventhough if it had dai_link->ignore (1), or already bounded dai_link (2).
But I guess it is wrong. This patch also solve this issue.
/* BEFORE */
int soc_bind_dai_link(...)
{
...
(1) if (dai_link->ignore)
return 0;
(2) if (soc_is_dai_link_bound(...))
return 0;
...
}
int snd_soc_add_dai_link(...)
{
...
=> ret = soc_bind_dai_link(...);
=> if (ret < 0)
=> return ret;
(A) list_add_tail(&dai_link->list, &card->dai_link_list);
...
}
/* AFTER */
int snd_soc_add_dai_link(...)
{
...
(1) if (dai_link->ignore)
return 0;
(2) if (soc_is_dai_link_bound(...))
return 0;
...
(A) list_add_tail(&dai_link->list, &card->dai_link_list);
return 0;
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r22lhkx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to separete snd_soc_unregister_dai() and
soc_del_dai() anymore. Let's merge these
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgn1hkxg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because complex separeted "card pre-listed component" and
"topology added component" duplicated operation is now
becoming simple, we don't need to check already bound dai_link
which is not exist anymore.
This patch removes soc_is_dai_link_bound().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9rxhkxw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The volume and bytes kcontrols are currently not freeing their
memory on initialization failures. When an error occurs, all the
widgets loaded so far are unloaded via sof_widget_unload().
But this only happens for the widgets that got successfully loaded.
Fix that by kfree()-ing the allocated memory on load error.
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222039.19651-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should suspend audio to D3 by default, for the sake of power saving,
change the condition of D0I3 suspending here to that when there is
stream with suspend_ignored specified.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper to check if the DSP should be put in D0i3. This function
returns true if a stream has ignored the SUSPEND trigger to keep the
pipelines running in the DSP.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add check before seeting d0_substate and return success if Audio DSP is
already in the target substate.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Audio DSP state machine with comments. Note that the
'D0<-->runtime D0I3' part is not implemented yet.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111223343.19986-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have platforms such as CFL with no known I2S codec being used, and
the ACPI tables are currently empty, so fall-back to using the
firmware filename used in nocodec mode
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222901.19892-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to firmware manifest/signature differences, we have to use
different firmware names, so split CNL machine table in three (CNL,
CFL, CML).
The CFL table is currently empty since all known platforms use
HDaudio, but let's plan ahead.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222901.19892-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The manifest information is different between CNL, CML and CFL platforms
hence we need to load different files.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222901.19892-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
jack_detect_work will be triggered by rt5682_irq. We should cancel
it if hs_jack is set to null.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222152.19723-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The headphone jack on buddy was broken with the following commit:
commit 6b5da66322 ("ASoC: rt5645: read jd1_1 status for jd
detection").
This changes the jd_mode for buddy to 4 so buddy can read from the same
register that was used in the working version of this driver without
affecting any other devices that might use this, since no other device uses
jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying
audio works.
Signed-off-by: Jacob Rasmussen <jacobraz@google.com>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
This adds a new mode WM8904_CLK_AUTO which automatically enables the FLL
if a frequency different than the MCLK is set.
These additions make the codec work with the simple-card driver in
general and especially in systems where the MCLK doesn't match the
required clock.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191108203152.19098-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
On KBL platform, the microphone is attached to external codec(rt5514)
instead of PCH. However, TDM slot between PCH and codec is 16 bits only.
In order to avoid setting wrong format, we should add a constraint to
force to use 16 bits format forever.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the Dialog DA7213 audio codec as a selectable option
in the kernel config. Currently the driver can only be selected for
Intel Baytrail/Cherrytrail devices or if SND_SOC_ALL_CODECS is enabled.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20191108174843.11227-3-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5677 DSP needs the I2S MCLK1 to run its DSP. Add a dapm route to
SSP0 CODEC IN so the clock is turned on automatically when the DSP is
turned on.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-10-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to limitations of the clocking configuration, we have no way of
scheduling our hibernation before the bdw dsp hibernates. This causes
issues when the system suspends with an open stream. We need userspace
to toggle the kcontrol before we are suspended so that any writes on
suspend are not lost and we don't corrupt the regmap.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-9-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The irq is disabled at suspend to avoid running the threaded irq
handler after the codec has been powered off. At resume, codec irq is
re-enabled and the interrupt status register is checked to see if
headphone has been pluggnd/unplugged while the device is suspended.
There is still a chance that the headphone gets enabled or disabled
after the codec is suspended. disable_irq syncs the threaded irq
handler, but soc-jack's threaded irq handler schedules a delayed
work to poll gpios (for debounce). This is still OK. The codec won't
be powered back on again because all audio paths have been suspended,
and there are no force enabled supply widgets (MICBIAS1 is disabled).
The gpio status read after codec power off could be wrong, so the
gpio values are checked again after resume.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-8-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MCLK1 gets disabled at suspend and re-enabled at resume. Before
MCLK1 is re-enabled, if the DSP is already on (either the DSP was
left on during suspend, or the DSP is turned on early at resume),
i2c register read returns garbage and corrupts the regmap cache.
This patch stops the DSP before suspend and restarts it after
resume with a dalay to ensure MCLK is on while loading firmware.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-7-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.
Marking MX-64h as volatile in regmap solved the issue.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a DAPM audio path from "DMIC L1" to "DSP Buffer" so that
when hotwording is enabled, DAPM does not power off the codec
with SND_SOC_BIAS_OFF.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-5-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Before a hotword is detected, GPIO1 pin is configured as IRQ
output so that jack detect works. When a hotword is detected,
the DSP firmware configures the GPIO1 pin as GPIO1 and
drives a 1. rt5677_irq() is called after a rising edge on
the GPIO1 pin, due to either jack detect event or hotword
event, or both. All possible events are checked and handled
in rt5677_irq() where GPIO1 pin is configured back to IRQ
output if a hotword is detected.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-4-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware rt5677_elf_vad is an ELF binary obtained from
request_firmware(). Sections of the ELF are loaded to
the DSP via SPI. A model (e.g. en_us.mmap) can optionally be
loaded to the DSP at RT5677_MODEL_ADDR to overwrite the
baked-in model in rt5677_elf_vad.
Then we switch to DSP mode, load firmware, and let DSP run.
When a hotword is detected, an interrupt is fired and
rt5677_irq() is called. When 'DSP VAD Switch' is turned off,
the codec is set back to normal mode.
The kcontrol 'DSP VAD Switch' is automatically enabled/disabled
when the hotwording PCM stream is opened/closed.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Audmix support two substream, When two substream start
to run, the trigger function may be called by two substream
in same time, that the priv->tdms may be updated wrongly.
The expected priv->tdms is 0x3, but sometimes the
result is 0x2, or 0x1.
Fixes: be1df61cf0 ("ASoC: fsl: Add Audio Mixer CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1e706afe53fdd1fbbbc79277c48a98f8416ba873.1573458378.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191108094641.20086-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro. The macro didn't give any better readability.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Since it requires the specific buffer type (SNDRV_DMA_TYPE_VMALLOC),
it's set in the pcm_new ops now.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (commit 08422d2c55: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set L1SEN to make sure the system can enter S0ix, and restore it on
resume.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add check to avoid possible NULL pointer dereference issue.
This issue was reported by static analysis tools, we didn't face this
issue but we can't rule it out either as a false positive.
Reported-by: Keqiao Zhang <keqiao.zhang@intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EFLYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JCuB/40P/KPRGlEFBSJAwTfCkjQxzvQUGBy
Y3w9QeMq3ONhCJt5BusmeuFqdkanzYqnl+NveGYKdKNTAwh6vEMGiMbGSB8dgrR5
R7PLNBDRJi7ZUDdOZle7VrdUiZWyieaZk/ecWxfTPKfqzoBjnM3XYSa30i55hvbQ
A2MTimFsO7nf0caLNBLqEqBjy68IHQ3tuHH27kA0MIpVNsYVrjaWfM400ot3odbg
0vMpNTM+PDcQGkWcq3sKJBOVVjmGg2Xs1yM5hv6Mu+q1zXLCtCKj+Pv+ZXC3BT6e
Yyxv/arpgvtjIU79Tv9RamVRC4jN6ZJRkThP9UW6JrX7tPCjvD+ygzPn
=4FMp
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.5
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EETsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BJCB/968YQYuvmvJbBify4l+l56rz3O0Qge
/dkifAsiBLYctwjYKVaqPhrcLts6gaKSZnKwNjF1d5ucjwb9y2cTuJoh65xJw4Z6
wgOBJiVC0wTdLzLMStVAX6QKFP6oVgWkKuaWRfhWiCbdWMVQesQlZePmu/PYU2IH
/B60aTN4noSMycFqmdHfyVGXnTX7cONCFr9cfE/EX+uQLCFe+QD7UItCEGl/1uwp
84mfNdLFkhX72yEEb5SZvGac5k9fyRvy1TPqkO5r+BQeYnePUMCpuA2mZaO9yBUh
r+6AMDcF300lXt860UtBidugpC5YM9vNUAu/dXMDowP8A+vBg2aquYe+
=GWKb
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.
When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:
[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411
Fix that by rejecting the topology if the bytes data size > max_size
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_unregister_component() is calling snd_soc_lookup_component()
under mutex_lock(). But, snd_soc_lookup_component() itself is using
mutex_lock(), thus it will be dead-lock.
This patch adds _nolocked version of it, and avoid dead-lock issue.
Fixes: ac6a4dd3e9f0("ASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component()")
Reported-by: "kernelci.org bot" <bot@kernelci.org>"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bltph4da.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF module load/unload tests show nasty recurring warnings:
WARNING: CPU: 5 PID: 1339 at sound/core/control.c:466
snd_ctl_remove+0xf0/0x100 [snd]
RIP: 0010:snd_ctl_remove+0xf0/0x100 [snd]
This regression was introduced by the removal of the call to
soc_remove_link_components() before soc_card_free() is invoked.
Go back to the initial order but only call
soc_remove_link_components() once.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Fixes: 5a4c9f054c ("ASoC: soc-core: snd_soc_unbind_card() cleanup")
GitHub issue: https://github.com/thesofproject/linux/issues/1424
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145801.9316-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:
[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411
Fix that by rejecting the topology if the bytes data size > max_size
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core has some API which is used from topology, but it is doing
topology specific operation at soc-core.
soc-core should care about core things, and topology should care
about topology things, otherwise, it is very confusable.
For example topology type is not related to soc-core,
it is topology side issue.
This patch removes meaningless check from soc-core.
This patch keeps extra initialization/destruction at
snd_soc_add_dai_link() / snd_soc_remove_dai_link()
which were for topology.
From this patch, non-topology card can use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pni6251h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
This patch calls snd_soc_register_dai() from snd_soc_register_dais()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r22m251l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
Because of topology side specific reason,
it is calling snd_soc_dapm_new_dai_widgets(),
but it is not needed _dais() side.
This patch factorizes snd_soc_register_dai() to
topology / _dais() common part, and topology specific part.
And do topology specific part at soc-topology.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgn2251p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
To prepare it, this patch adds missing parameter legacy_dai_naming
to snd_soc_register_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv7i251u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.
This patch adds missing soc_del_dai() and snd_soc_unregister_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9ry251z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_unregister_dais() next to
snd_soc_register_dais().
This is prepare for snd_soc_register_dais() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87woce2524.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_register_dai() next to
snd_soc_register_dais().
This is prepare for snd_soc_register_dais() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2wu2528.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_unregister_component() is now finding component manually,
but we already have snd_soc_lookup_component() to find component;
Let's use existing function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zhha252c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core has
snd_soc_add_component(), snd_soc_component_add(),
snd_soc_del_component(), snd_soc_component_del().
These are very confusing naming.
snd_soc_component_xxx() are called from snd_soc_xxx_component(),
and these are very small.
Let's merge these into snd_soc_xxx_component(), and
remove snd_soc_component_xxx().
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rum3jmy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.
Now ALSA SoC has snd_soc_add_component(), but there is no paired
snd_soc_del_component(). Thus, snd_soc_unregister_component() is
calling cleanup function randomly. it is difficult to read.
This patch adds missing snd_soc_del_component_unlocked() and
balance up code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/8736f23jn4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_lookup_component() is using mix of continue and break
in the same loop. It is odd.
This patch cleanup it.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874kzi3jn8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_lookup_component() to upper side.
This is prepare for snd_soc_unregister_component()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zjy3jnd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
ALSA SoC has soc_bind_dai_link(), but its paired soc_unbind_dai_link()
is not implemented.
More confusable is that soc_remove_pcm_runtimes() which should be
soc_unbind_dai_link() is implemented without synchronised
to soc_bind_dai_link().
This patch cleanup this unbalance.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877e4e3jni.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we focus to soc_bind_dai_link() at snd_soc_instantiate_card(),
we will notice very complex operation.
static int snd_soc_instantiate_card(...)
{
...
/*
* (1) Bind dai_link via card pre-linked dai_link
*
* Bind dai_link via card pre-linked.
* 1 dai_link will be 1 rtd, and connected to card.
* for_each_card_prelinks() is for card pre-linked dai_link.
*
* Image
*
* card
* - rtd(A)
* - rtd(A)
*/
for_each_card_prelinks(card, i, dai_link) {
ret = soc_bind_dai_link(card, dai_link);
...
}
...
/*
* (2) Connect card pre-linked dai_link to card list
*
* Connect all card pre-linked dai_link to *card list*.
* Here, (A) means from card pre-linked.
*
* Image
*
* card card list
* - rtd(A) - dai_link(A)
* - rtd(A) - dai_link(A)
* - ... - ...
*/
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_dai_link(card, dai_link);
...
}
...
/*
* (3) Probe binded component
*
* Each rtd has many components.
* Here probes each rtd connected components.
* rtd(A) in Image is the probe target.
*
* During this component probe, topology may add new dai_link to
* *card list* by using snd_soc_add_dai_link() which is
* used at (2).
* Here, (B) means from topology
*
* Image
*
* card card list
* - rtd(A) - dai_link(A)
* - rtd(A) - dai_link(A)
* - ... - ...
* - dai_link(B)
* - dai_link(B)
*/
ret = soc_probe_link_components(card);
...
/*
* (4) Bind dai_link again
*
* Bind dai_link again for topology.
* Note, (1) used for_each_card_prelinks(),
* here is using for_each_card_links()
*
* This means from card list.
* As Image indicating, it has dai_link(A) (from card pre-link)
* and dai_link(B) (from topology).
* main target here is dai_link(B).
* soc_bind_dai_link() ignores already used
* dai_link (= dai_link(A))
*
* Image
*
* card card list
* - rtd(A) - dai_link(A)
* - rtd(A) - dai_link(A)
* - ... - ...
* - rtd(B) - dai_link(B)
* - rtd(B) - dai_link(B)
*/
for_each_card_links(card, dai_link) {
ret = soc_bind_dai_link(card, dai_link);
...
}
...
}
As you see above, it is doing very complex method.
The problem is binding dai_link via "card pre-linked" (= (1)) and
"topology added dai_link" (= (3)) are separated.
The code can be simple if we can bind dai_link when dai_link
is connected to *card list*.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sou3jnn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_is_dai_link_bound() check will be called both
*before* soc_bind_dai_link() (A), and
*under* soc_bind_dai_link() (B).
These are very verbose code. Let's remove one of them.
* static int soc_bind_dai_link(...)
{
...
(B) if (soc_is_dai_link_bound(...)) {
...
return 0;
}
...
}
static int snd_soc_instantiate_card(...)
{
...
for_each_card_links(...) {
(A) if (soc_is_dai_link_bound(...))
continue;
* ret = soc_bind_dai_link(...);
if (ret)
goto probe_end;
}
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a79a3jns.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_init_dai_link() is needed to be called before soc_bind_dai_link().
int snd_soc_instantiate_card()
{
for_each_card_prelinks(...) {
(1) ret = soc_init_dai_link(...);
...
}
...
for_each_card_prelinks(...) {
(2) ret = soc_bind_dai_link(...);
...
}
...
for_each_card_links(...) {
...
(A) ret = soc_init_dai_link(...);
...
(B) ret = soc_bind_dai_link(...);
}
...
(1) is for (2), and (A) is for (B)
(1) and (2) are for card prelink dai_link.
(A) and (B) are for topology added dai_link.
soc_init_dai_link() is sanity check for dai_link, not initializing today.
Therefore, it is confusable naming. We can rename it as sanity_check.
And this check is for soc_bind_dai_link().
It can be more simple code if we can call it from soc_bind_dai_link().
This patch renames it to soc_dai_link_sanity_check(), and
call it from soc_bind_dai_link().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d0e63joh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_init_dai_link() next to soc_bind_dai_link().
This is prepare for soc_bind_dai_link() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eeym3joq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST
to trigger the BE DAI's before the FE DAI's. This prevents the
xruns seen on playback pipelines using the link DMA.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST
determine the order in which FE DAI and BE DAI are triggered.
In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is
triggered before the BE DAI and in the case of
SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before
the FE DAI. And this order remains the same irrespective of the
trigger command.
In the case of the SOF driver, during playback, the FW
expects the BE DAI to be triggered before the FE DAI during
the START trigger. The BE DAI trigger handles the starting of
Link DMA and so it must be started before the FE DAI is started
to prevent xruns during pause/release. This can be addressed
by setting the trigger order for the FE dai link to
SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger,
the FW expects the FE DAI to be triggered before the BE DAI.
Retaining the same order during the START and STOP commands,
results in FW error as the DAI component in the FW is still
active.
The issue can be fixed by mirroring the trigger order of
FE and BE DAI's during the START and STOP trigger. So, with the
trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be
trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME
and the BE DAI will be triggered first during the
STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order
set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered
first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands
and the FE DAI will be triggered first during the
SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The same driver is reused for 3 different configurations, but the
driver will only be build if ApolloLake is selected.
Fix and make sure each device can work without dependencies on others
(useful for minimal configurations).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This option is only required with the Skylake platform driver, there
is no reason to have this option in machine drivers. This is
e.g. useless for SOF-based solutions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This option famously broke audio on Linus' laptop and the problem have
not been fixed.
Mark as DEPRECATED to avoid any ambiguity with distros.
Use SOF if you need HDaudio support w/ the DSP enabled, e.g. for DMIC
capture.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far we used select to use the relevant built-in/module options, but
this led to blurring layers between core and Intel Kconfigs.
Use def_tristate works just as well and removes Intel stuff from the code.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
updated solution to the problem reported with randconfig:
CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:
sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'
use def_trisate to propagate the right settings without select.
Fixes: f4df4e4042 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some distros select all possible options, despite existing warnings to
be careful. This leads to e.g. user reports that the HDaudio codec and
DMIC are not handled by SOF.
Add an explicit menu item to unlock developer options, and make them
dependent on CONFIG_EXPERT. Hopefully with this double-lock these
options will only be selected by developers.
GitHub issue: https://github.com/thesofproject/sof/issues/1885
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some distros select all options blindly, which leads to confusion and
bug reports. SOF does not fully support Broadwell due to firmware
dependencies, the machine drivers can only support one option, and
UCM/topology files are still being propagated to downstream distros,
so make SOF on Broadwell an opt-in option that first require distros
to opt-out of existing defaults.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204237
Fixes: f35bf70f61 ('ASoC: Intel: Make sure BDW based machine drivers build for SOF')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some distros select all options blindly, which leads to confusion and
bug reports. Since SOF does not support Baytrail-CR for now, and
UCM/topology files are still being propagated to downstream distros,
make SOF on Baytrail an opt-in option that first require distros to
opt-out of existing defaults.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the retry argument for the hda_dsp_wait_d0i3c_done()
function and use the HDA_DSP_REG_POLL_RETRY_COUNT macro
directly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine driver to enable
RT5682 on SSP0, DMIC, HDMI and
RT1011 AMP on SSP1 with
2 CH / 24 bit TDM Playback over 4 individual codecs and
4 CH / 24 bit Capture to provide feedback.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add match for CML m/c with RT1011 and RT5682
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When ASoC card instance is removed containing a HDA codec,
hdac_hda_codec_remove() may run in parallel with codec resume.
This will cause problems if the HDA link is freed with
snd_hdac_ext_bus_link_put() while the codec is still in
middle of its resume process.
To fix this, change the order such that pm_runtime_disable()
is called before the link is freed. This will ensure any
pending runtime PM action is completed before proceeding
to free the link.
This issue can be easily hit with e.g. SOF driver by loading and
unloading the drivers.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170635.26389-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no other code use the RT1011_INIT_REG_LEN definition,
except rt1011_reg_init().
Hence, we remove it and fix the typo.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115446.21108-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The !component->card->instantiated statement should remove in kcontrol.
It is no need to check the card->instantiated in kcontrol.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115401.20898-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_tplg_component_remove() is pair of snd_soc_tplg_component_load(),
and it is topology related cleanup function.
The driver which called _load() needs to call _remove() by its responsibility.
Today, skl-pcm and topology are the user, and these are calling both
_load() and _remove().
soc-core doesn't need to call it.
This patch remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fbdnwt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixup this warning
LINUX/sound/soc/codecs/rt5677-spi.c: In function ‘rt5677_spi_pcm_close’:
LINUX/sound/soc/codecs/rt5677-spi.c:114:30: warning: unused variable ‘rtd’ [-Wunused-variable]
struct snd_soc_pcm_runtime *rtd = substream->private_data;
^~~
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a79idajh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to implement HDMI/DP audio by using the common
snd-hda-codec-hdmi driver.
Change of codec driver affects user-space as the two
drivers expose different mixer controls. A new kernel
module option "use_common_hdmi" is added to user-space
to indicate which interface should be used. The default
driver can be selected via a Kconfig option.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Match the include guard define to actual filename. The source
directory now has an actual hda_dsp_common.h header, so the old
include guard may cause confusion.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
When snd-hda-codec-hdmi is used, the PCM device numbers are
parsed from card topology and passed to the codec driver.
This needs to be done at runtime as topology changes may
affect PCM device allocation.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle all HDA codecs using same logic, including HDMI/DP.
Call to snd_hda_codec_build_controls() is delayed for HDMI/DP HDA
devices. This is needed to discover the PCM device numbers as
defined in topology.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support three different use cases with rockchip_max98090 driver.
The three use cases:
- max98090 only: Current usage, where HDMI link is missing.
- HDMI only: Needed use case for veyron_mickey board.
- max98090 + HDMI: Ideal use case for veyron_jerry, veyron_minnie..etc.
The presence of max98090 is determined by the presence of
rockchip,audio-codec device property.
The presence of HDMI is determined by the presence of
rockchip,hdmi-codec device property.
Create different sound card based on the configuration.
Note that we keep max98090 only usage for backward compatibility.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-4-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Appearently the CONFIG_SND_SOC_SOF_KABYLAKE and CONFIG_SND_SOC_SOF_SKYLAKE
options are not present in Kconfig and 'struct snd_sof_dsp_ops sof_skl_ops'
is not declared in the code, too.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191028173329.29538-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Those strings are exposed to the user space as the
card name thus used in the GUIs. The common
standard is to avoid '_' here. The worst case
is 'sof-skl_hda_card' string.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191028164624.14334-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new implemented snd_sof_prepare() and snd_sof_complete() as the
power management callbacks for pci probing platforms.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system is entering into S0ix, the PCI device may transition to the
D0i3 substate instead of D3. In D0i3, some always-on functionality can
be enabled, such as acoustic event detection, voice activity detection
or hotwording. When an event is detected, the DSP firmware can wake-up
the device for a transition to D0 with an interrupt.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No set_power_state ops means that the platform doesn't support D0i3,
return -ENOTSUPP for the case.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable system wake up via IPC interrupt from DSP when the system is
suspending to the S0ix state, and disable it in the corresponding
resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During system suspend, the PM framework will freeze all applications and
the ALSA/ASoC core will suspend all RUNNING PCM streams.
However, D0ix-compatible PCM streams should keep the related pipelines
active in the DSP when the system is entering S0ix. The TRIGGER_SUSPEND
event is trapped in such cases to prevent the pipelines from being
stopped. Likewise, the TRIGGER_RESUME/START events should not affect the
pipeline state.
The SOF driver also triggers some DSP Firmware pipelines based on the
DAPM widgets power events. In such cases, we also ignore PRE_PMU and
POST_PMD events to keep the pipelines active.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the prepare() and complete() callbacks for power management,
initialize s0_suspend flag at prepare(), and reset it at complete().
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a suspend_ignored flag to snd_sof_pcm_stream that will be used to
decide if the corresponding FW pipeline should be kept active to perform
always on tasks when the system is entering the S0ix state.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For compact IPCs, we will send the IPC header/command via the HIPCIDR
register and the first 32bit payload via the HIPCIDD register, no
mailbox will be used.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0
substate, it will call into the platform specific implementation, and
update the d0_substate at success.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The configuration for D0ix in FW is platform specific, let's do this and
send IPC in the platform set_power_state() ops.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On cAVS platforms, some IPCs are required to be sent via IPC registers
only(e.g. when in D0i3, mailbox is unaccessible), add hda-ipc.h to hold
definition of those compact IPCs.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Memory windows could be powered off before receiving PM_GATE IPC reply
from FW, we can't read the mailbox to get reply.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper sof_send_pm_ipc() is only suitable for context save/restore
IPCs' sending, so rename it to sof_send_pm_ctx_ipc here.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parses the token from tplg file and store it to snd_sof_pcm_stream
d0i3_compatible flag, which can be used later for d0ix transition
management.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add stream token SOF_TKN_STREAM_PLAYBACK_COMPATIBLE_D0I3 and
SOF_TKN_STREAM_CAPTURE_COMPATIBLE_D0I3 to denote if the stream can be
opened at low power d0i3 status or not.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag d0i3_compatible to struct snd_sof_pcm_stream to denote if the
stream can tolerate a transition to the D0i3 substate while opened (thus
seen as 'active' by pm_runtime).
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for apl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for cnl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding helper to implement setting dsp to d0i3 or d0i0 status, this will
be needed for driver D0ix support.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
D0i3 is a platform-defined substate of D0, so we need a
platform-specific callback in dsp_ops to handle the relevant
configurations.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add field d0_substate to struct snd_sof_dev to store the current DSP
D0 sub-state(only meaningful when DSP in D0), which could be D0I0 or
D0I3.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
chan > 8 or chan < 0 shouldn't happen.
This patch uses WARN_ON() for such case.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.
This issue may also happen with trigger->fsl_esai_trigger_start.
So Add spin lock to lock those functions.
Fixes: 7ccafa2b38 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output divider should align with the output sample
rate, if use ideal sample rate, there will be a lot of overload,
which would cause underrun.
The maximum divider of asrc clock is 1024, but there is no
judgement for this limitation in driver, which may cause the divider
setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample
rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/23c634e4bf58afce5b3ae67f5f42e8d1cae2639a.1572252307.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The first DMIC capture always fail (zero sequence data from PCM port)
after using DSP hotwording function (i.e. Google assistant).
This rt5514 codec requires to control mclk directly in the set_bias_level
function. Implement this function in machine driver to control the
ssp1_mclk clock explicitly could fix this issue.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571994691-20199-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed
fsl_dma_ops but left a usage, leading to a build error for some
configs, eg. mpc85xx_defconfig:
sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’:
sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function)
dma->dai.ops = &fsl_dma_ops;
^~~~~~~~~~~
Remove the usage to fix the build.
Fixes: 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.au
Signed-off-by: Mark Brown <broonie@kernel.org>
max98090 spec states that chip needs to be in turned-on state to supply
mic bias. Enable SHDN dapm widget along with MICBIAS widget to
actually turn on mic bias for proper headset button detection.
This is similar to cht_ti_jack_event in
sound/soc/intel/boards/cht_bsw_max98090_ti.c.
Note that due to ts3a227e reports the jack event right away before the
notifier is registered, if headset is plugged on boot, headset button
will not get detected until headset is unplugged and plugged. This is
still an issue to be fixed.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028095229.99438-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When non standard names are used it is possible that one of the directions
are not provided, thus the flags needs to be present to tell the core that
we have half duplex setup.
Fixes: 642aafea88 ("ASoC: ti: remove compat dma probing")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191028115207.5142-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the implementation of sof_set_get_large_ctrl_data() there is a memory
leak in case an error. Release partdata if sof_get_ctrl_copy_params()
fails.
Fixes: 54d198d501 ("ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027215330.12729-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the implementation of sof_dfsentry_write() memory allocated for
string is leaked in case of an error. Go to error handling path if the
d_name.name is not valid.
Fixes: 091c12e1f5 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027194856.4056-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are missing the 'CONFIG_' prefix when using the kernel configure item
SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1, here correct them.
Fixes: 43b2ab9009 ('ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture')
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025221538.6668-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current position update is not precise enough for PulseAudio to
work reliably with the timer-based scheduling on Baytrail,
Cherrytrail, Broadwell.
Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that
the position is only reliable and updated during period_elapsed
events.
This will be reverted when the firmware provides a more accurate
position for those platforms.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined
in the SOF PCM core, which doesn't scale. To account for platform
variations, these flags need to be set in DSP ops.
This patch only moves the definitions and does not change any
functionality.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We see odd FIFO overruns with this, we assume the best thing to do is
to disable the RX I2S frontend first, and then disable the FIFO that
is using it.
This also fixes an issue where using multi-word frames (TDM) have
partial samples stuck in the FIFO which then get read out when the
next capture is started.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform'
driver.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: merge fix for power management]
[ben.dooks@codethink.co.uk: add review change for fsync of 1 clock]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
formats when requested.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-3-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix bugs reported by kbuild test robot
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191024184026.183913-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocation of rt5677_dsp can potentially fail and return null, so add
a null check and return -ENOMEM on a memory allocation failure.
Addresses-Coverity: ("Dereference null return")
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191024124610.18182-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add platform specific data for Kahlee project.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm conversion of kirkwood was incorrect; on removal, devm takes
effect after the "remove" function has returned. So, the effect of
the conversion was to change the order during remove from:
- snd_soc_unregister_component() (unpublishes interfaces)
- clk_disable_unprepare()
- cleanup resources
After the conversion, this became:
- clk_disable_unprepare() - while the device may still be active
- snd_soc_unregister_component()
- cleanup resources
Hence, it introduces a bug, where the internal clock for the device
may be shut down before the device itself has been shut down. It is
known that Marvell SoCs, including Dove, locks up if registers for a
peripheral that has its clocks disabled are accessed.
Fixes: f98fc0f815 ("ASoC: kirkwood: replace platform to component")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently each SSI unit's busif dma address is calculated by
following calculation formula:
0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400
But according to R-Car3 HW manual 41.1.4 Register Configuration,
ssi9 4/5/6/7 busif data register address
(SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF)
are out of this rule.
This patch updates the calculation formula to correct
ssi9 4/5/6/7 busif data register address.
Fixes: 5e45a6fab3 ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[erosca: minor improvements in commit description]
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191022185429.12769-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig, PCI ID and chip info for JSL platform.
The DSP only has 2 cores for this platform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194705.23347-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
