Commit Graph

602852 Commits

Author SHA1 Message Date
Josef Bacik
31b9655f43 Btrfs: track transid for delayed ref flushing
Using the offwakecputime bpf script I noticed most of our time was spent waiting
on the delayed ref throttling.  This is what is supposed to happen, but
sometimes the transaction can commit and then we're waiting for throttling that
doesn't matter anymore.  So change this stuff to be a little smarter by tracking
the transid we were in when we initiated the throttling.  If the transaction we
get is different then we can just bail out.  This resulted in a 50% speedup in
my fs_mark test, and reduced the amount of time spent throttling by 60 seconds
over the entire run (which is about 30 minutes).  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-06-22 17:54:18 -07:00
Naveen N. Rao
844e3be476 powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
Classic BPF JIT was never ported completely to work on little endian
powerpc. However, it can be enabled and will crash the system when used.
As such, disable use of BPF JIT on ppc64le.

Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-23 10:35:31 +10:00
Michael Ellerman
6e914ee629 powerpc: Fix faults caused by radix patching of SLB miss handler
As part of the Radix MMU support we added some feature sections in the
SLB miss handler. These are intended to catch the case that we
incorrectly take an SLB miss when Radix is enabled, and instead of
crashing weirdly they bail out to a well defined exit path and trigger
an oops.

However the way they were written meant the bailout case was enabled by
default until we did CPU feature patching.

On powermacs the early debug prints in setup_system() can cause an SLB
miss, which happens before code patching, and so the SLB miss handler
would incorrectly bailout and crash during boot.

Fix it by inverting the sense of the feature section, so that the code
which is in place at boot is correct for the hash case. Once we
determine we are using Radix - which will never happen on a powermac -
only then do we patch in the bailout case which unconditionally jumps.

Fixes: caca285e5a ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code")
Reported-by: Denis Kirjanov <kda@linux-powerpc.org>
Tested-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-23 09:58:17 +10:00
Kirill A. Shutemov
4ac1c17b20 UBIFS: Implement ->migratepage()
During page migrations UBIFS might get confused
and the following assert triggers:
[  213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436)
[  213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008
[  213.490000] Hardware name: Allwinner sun4i/sun5i Families
[  213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14)
[  213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0)
[  213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50)
[  213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8)
[  213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290)
[  213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80)
[  213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0)
[  213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4)
[  213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0)
[  213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8)
[  213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274)
[  213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c)
[  213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0)
[  213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8)
[  213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48)
[  213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444)
[  213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614)
[  213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c)
[  213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34)

UBIFS is using PagePrivate() which can have different meanings across
filesystems. Therefore the generic page migration code cannot handle this
case correctly.
We have to implement our own migration function which basically does a
plain copy but also duplicates the page private flag.
UBIFS is not a block device filesystem and cannot use buffer_migrate_page().

Cc: stable@vger.kernel.org
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[rw: Massaged changelog, build fixes, etc...]
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>
2016-06-23 00:29:53 +02:00
Richard Weinberger
1118dce773 mm: Export migrate_page_move_mapping and migrate_page_copy
Export these symbols such that UBIFS can implement
->migratepage.

Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>
2016-06-23 00:29:45 +02:00
Richard Weinberger
972228d874 ubi: Make recover_peb power cut aware
recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.

In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.

Cc: stable@vger.kernel.org
Reported-by: Jörg Pfähler <pfaehler@isse.de>
Reviewed-by: Jörg Pfähler <pfaehler@isse.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
2016-06-23 00:29:32 +02:00
Linus Walleij
c0a1ecb9f4 gpio: make library immune to error pointers
Most functions that take a GPIO descriptor in need to check the
descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC()
macro except for the gpiod_to_irq() function which needs special
handling.

Cc: stable@vger.kernel.org
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23 00:29:31 +02:00
Linus Walleij
39243ee771 gpio: make sure gpiod_to_irq() returns negative on NULL desc
commit 54d77198fd
("gpio: bail out silently on NULL descriptors")
doesn't work for gpiod_to_irq(): drivers assume that NULL
descriptors will give negative IRQ numbers in return.

It has been pointed out that returning 0 is NO_IRQ and that
drivers should be amended to treat this as an error, but that
is for the longer term: now let us repair the semantics.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23 00:29:30 +02:00
Axel Lin
0b305ccc1b gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
Fixes: 9ae482104c ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23 00:29:29 +02:00
Linus Torvalds
f9020d1741 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull userns fix from Eric Biederman:
 "This contains just a single small patch that fixes a tiny hole in the
  logic of allowing unprivileged mounting of proc and sysfs.

  In practice I don't think anyone is affected because having MNT_RDONLY
  clear in mnt->mnt_flags but MS_RDONLY set in sb->s_flags is very weird
  for a filesystem, and weirder for proc and sysfs.  However if it
  happens let's handle it correctly and then no one has to to worry
  about this crazy case"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: Account for MS_RDONLY in fs_fully_visible
2016-06-22 14:11:24 -07:00
Linus Torvalds
144b5ae3e3 GPIO fixes for the v4.7 cycle:
- It was discovered that too many parts of the kernel does not
   respect gpiod_to_irq() returning zero for an invalid IRQ.
   While this gets fixed, we need to make it return negative
   errorcodes again.
 
 - Harden the library a bit when passed error pointers. It is
   a bug to use these, but let's be helpful and warn the users.
 
 - Fix an uninitialized spinlock in the 104-idi-48 driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXaraQAAoJEEEQszewGV1zfUQQAKOAYtQ6nMat4R12UR0RKTIV
 oHALxvZVHvaZbMxwSwcyIognHQJ6u6tgsTrv4M8+XQqW9LsIyw7wWzbLHY+ceYSO
 l29RKzjm0diUcFBQ+E9bYoETYtg1XDjJwAtu/hRhNp3MYXZg7UeoHijvAprGYmkM
 ZyQ90Et4E0TfaLV+nuHBHPlU/5kzdkKXdzH+DwNxEbFKK0y35QaOWHRolRV8/qh3
 H/WgDyFo0KzRb6Ehd/MnTCq5UyQp0cAoPDuyOp6LIihFlu81UQfFhSr5kS3Q4jV+
 EbZ59XbhjXy+UUsYRaFOmGlIsVOyVhqwsRa5VzuBEdKsrW5BG2zKNBz2ANteoyUp
 1nmcde4r28G10zJU0uiNasPk2VEpAhbcGyu6VfSyS9nSNn2sBR+tEYhn7IYP26xo
 PN53tjDB3xc0hpAvNUwdJBJ6kJGlqT5GyLkTwy9Yt1IlMi7aKUforyh6e8feEri4
 j/BQWFrmxnjcQWpPJhPdkVZozmFeHBM9+tREhEjBXRiEWIyBzAh9m2kNK3Gg3vfW
 YLikNGdo2w7rmKA+BvFfzOlqg2R/SWvPXSqL0Y4H/IAe+OT5pV0rf/UW6FBKLTuY
 qgmavFcTbMCbTRR3nVtaAN5HZiW5eXN8u16ONaZbGgroT9PPzLwXJ58gpkXv+v/3
 VTg2vw1debYCwrastDdi
 =cwEd
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "More GPIO fixes.  Most prominent the gpiod_to_irq() fix brought to my
  attention by Hans de Goede.  The hardening patch is a consequence of
  the reasoning around that bug.

   - It was discovered that too many parts of the kernel does not
     respect gpiod_to_irq() returning zero for an invalid IRQ.  While
     this gets fixed, we need to make it return negative errorcodes
     again.

   - Harden the library a bit when passed error pointers.  It is a bug
     to use these, but let's be helpful and warn the users.

   - Fix an uninitialized spinlock in the 104-idi-48 driver"

* tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: make library immune to error pointers
  gpio: make sure gpiod_to_irq() returns negative on NULL desc
  gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
2016-06-22 10:13:25 -07:00
James Morse
d74b4e4f1a arm64: hibernate: Don't hibernate on systems with stuck CPUs
Hibernate relies on cpu hotplug to prevent secondary cores executing
the kernel text while it is being restored.

Add a call to cpus_are_stuck_in_kernel() to determine if there are
CPUs not counted by 'num_online_cpus()', and prevent hibernate in this
case.

Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-22 15:48:10 +01:00
James Morse
5c492c3f52 arm64: smp: Add function to determine if cpus are stuck in the kernel
kernel/smp.c has a fancy counter that keeps track of the number of CPUs
it marked as not-present and left in cpu_park_loop(). If there are any
CPUs spinning in here, features like kexec or hibernate may release them
by overwriting this memory.

This problem also occurs on machines using spin-tables to release
secondary cores.
After commit 44dbcc93ab ("arm64: Fix behavior of maxcpus=N")
we bring all known cpus into the secondary holding pen, meaning this
memory can't be re-used by kexec or hibernate.

Add a function cpus_are_stuck_in_kernel() to determine if either of these
cases have occurred.

Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-22 15:48:09 +01:00
Ben Dooks
c9058d43d9 ALSA: hda/tegra: iomem fixups for sparse warnings
The readl/writel are not being passed __iomem annotated
variables, so fix the following sparse warnings by adding
__iomem in:

sound/pci/hda/hda_tegra.c:120:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:120:9:    expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:120:9:    got unsigned int [usertype] *addr
sound/pci/hda/hda_tegra.c:125:16: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:125:16:    expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:125:16:    got unsigned int [usertype] *addr
sound/pci/hda/hda_tegra.c:134:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:134:13:    expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:134:13:    got void *dword_addr
sound/pci/hda/hda_tegra.c:137:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:137:9:    expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:137:9:    got void *dword_addr
sound/pci/hda/hda_tegra.c:146:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:146:13:    expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:146:13:    got void *dword_addr
sound/pci/hda/hda_tegra.c:156:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:156:13:    expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:156:13:    got void *dword_addr
sound/pci/hda/hda_tegra.c:159:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:159:9:    expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:159:9:    got void *dword_addr
sound/pci/hda/hda_tegra.c:168:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:168:13:    expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:168:13:    got void *dword_addr
sound/pci/hda/hda_tegra.c:173:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:173:23:    expected void ( *reg_writel )( ... )
sound/pci/hda/hda_tegra.c:173:23:    got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:174:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:174:22:    expected unsigned int ( *reg_readl )( ... )
sound/pci/hda/hda_tegra.c:174:22:    got unsigned int ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:175:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:175:23:    expected void ( *reg_writew )( ... )
sound/pci/hda/hda_tegra.c:175:23:    got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:176:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:176:22:    expected unsigned short ( *reg_readw )( ... )
sound/pci/hda/hda_tegra.c:176:22:    got unsigned short ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:177:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:177:23:    expected void ( *reg_writeb )( ... )
sound/pci/hda/hda_tegra.c:177:23:    got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:178:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:178:22:    expected unsigned char ( *reg_readb )( ... )
sound/pci/hda/hda_tegra.c:178:22:    got unsigned char ( static [toplevel] *<noident> )( ... )

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-22 15:19:10 +02:00
Lukasz Luba
8d39fc085d PM / devfreq: fix initialization of current frequency in last status
Some systems need current frequency from last_status for calculation
but it is zeroed during initialization. When the device starts there is
no history, but we can assume that the last frequency was the
same as the initial frequency (which is also used in 'previous_freq').
The log shows the result of this misinterpreted value.
[    2.042847] ... Failed to get voltage for frequency 0: -34

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:53:00 +09:00
Dan Carpenter
674789dd2c PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
Smatch complains because platform_get_resource() returns NULL on error
and not an error pointer so the check is wrong.  Julia Lawall pointed
out that normally we don't check these, because devm_ioremap_resource()
has a check for NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:55 +09:00
MyungJoo Ham
67ffdb529b PM / devfreq: remove double put_device
When device_register() returns with error, it has already
done put_device() on the input device pointer.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:52 +09:00
Cai Zhiyong
a5e9b937fa PM / devfreq: fix double call put_device
1295  */
1296 void device_unregister(struct device *dev)
1297 {
1298         pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
1299         device_del(dev);
1300         put_device(dev);
1301 }
1302 EXPORT_SYMBOL_GPL(device_unregister);
1303

device_unregister is called put_device, there is no need to call
put_device(&devfreq->dev) again.

Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:43 +09:00
MyungJoo Ham
ac4b281176 PM / devfreq: fix duplicated kfree on devfreq pointer
device_unregister() calls kfree already.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:52:40 +09:00
MyungJoo Ham
3e1d7fb0d2 PM / devfreq: devm_kzalloc to have dev pointer more precisely
devm_kzalloc of devfreq's statistics data structure has been
using its parent device as the dev allocated for.
If a device's devfreq is disabled in run-time,
such allocated memory won't be freed.

Desginating more precisely with the devfreq device
pointer fixes the issue.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22 13:51:08 +09:00
Lv Zheng
2f38b1b16d ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading
The new module-level code (MLC) approach invokes MLC on the per-table
basis, but the dynamic loading support of this is incorrect because
of the lock order:

 acpi_ns_evaluate
   acpi_ex_enter_intperter
     acpi_ns_load_table (triggered by Load opcode)
       acpi_ns_exec_module_code_list
         acpi_ex_enter_intperter

The regression is introduced by the following commit:

  Commit: 2785ce8d0d
  ACPICA Commit: 071eff738c59eda1792ac24b3b688b61691d7e7c
  Subject: ACPICA: Add per-table execution of module-level code

This patch fixes this regression by unlocking the interpreter lock
before invoking MLC.  However, the unlocking is done to the
acpi_ns_load_table(), in which the interpreter lock should be locked
by acpi_ns_parse_table() but it wasn't.

Fixes: 2785ce8d0d (ACPICA: Add per-table execution of module-level code)
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
[ rjw : Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-22 01:07:35 +02:00
Shaokun Zhang
20c27a4270 arm64: mm: remove page_mapping check in __sync_icache_dcache
__sync_icache_dcache unconditionally skips the cache maintenance for
anonymous pages, under the assumption that flushing is only required in
the presence of D-side aliases [see 7249b79f6b ("arm64: Do not flush
the D-cache for anonymous pages")].

Unfortunately, this breaks migration of anonymous pages holding
self-modifying code, where userspace cannot be reasonably expected to
reissue maintenance instructions in response to a migration.

This patch fixes the problem by removing the broken page_mapping(page)
check from the cache syncing code, otherwise we may end up fetching and
executing stale instructions from the PoU.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21 20:10:18 +01:00
Masahiro Yamada
9ca4e58c20 arm64: fix boot image dependencies to not generate invalid images
I fixed boot image dependencies for arch/arm in commit 3939f33450
("ARM: 8418/1: add boot image dependencies to not generate invalid
images").

I see a similar problem for arch/arm64; "make -jN Image Image.gz"
would sometimes end up generating bad images where N > 1.

Fix the dependency in arch/arm64/Makefile to avoid the race
between "make Image" and "make Image.*".

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21 20:10:18 +01:00
Jean-Philippe Brucker
f7e0efc9b5 arm64: update ASID limit
During a rollover, we mark the active ASID on each CPU as reserved, before
allocating a new ID for the task that caused the rollover. This means that
with N CPUs, we can only guarantee the new task to obtain a valid ASID if
we have at least N+1 ASIDs. Update this limit in the initcall check.

Note that this restriction was introduced by commit 8e648066 on the
arch/arm side, which disallow re-using the previously active ASID on the
local CPU, as it would introduce a TLB race.

In addition, we only dispose of NUM_USER_ASIDS-1, since ASID 0 is
reserved. Add this restriction as well.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-06-21 20:10:18 +01:00
Lyude
1e3fa0acfe drm/i915/fbc: Disable on HSW by default for now
>From https://bugs.freedesktop.org/show_bug.cgi?id=96461 :

This was kind of a difficult bug to track down. If you're using a
Haswell system running GNOME and you have fbc completely enabled and
working, playing videos can result in video artifacts. Steps to
reproduce:

- Run GNOME
- Ensure FBC is enabled and active
- Download a movie, I used the ogg version of Big Buck Bunny for this
- Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin !
  glimagesink` in a terminal
- Watch for about over a minute, you'll see small horizontal lines go
  down the screen.

For the time being, disable FBC for Haswell by default.

Stefan Richter reported kernel freezes (no video artifacts) when fbc
is on.  (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE
applications, thread begins at https://lkml.org/lkml/2016/4/26/813).
We also got reports from Steven Honeyman on openbox+roxterm.

v2 (From Paulo):
  - Add extra information to the commit message
  - Add Fixes tag
  - Rebase

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464
Fixes: a98ee79317 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com
(cherry picked from commit c7f7e2feff)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-21 19:45:21 +03:00
Mika Kahola
34511dce4b drm/i915: Revert DisplayPort fast link training feature
It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.

This is a manual revert of commits 5fa836a9d8 ("drm/i915: DP link
training optimization") and 4e96c97742 ("drm/i915: eDP link training
optimization").

Fixes: 5fa836a9d8 ("drm/i915: DP link training optimization")
Fixes: 4e96c97742 ("drm/i915: eDP link training optimization")
Cc: <stable@vger.kernel.org> # v4.2+

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 91df09d92a)
2016-06-21 19:45:03 +03:00
Rex Zhu
270d013659 drm/amd/powerplay: enable clock stretch feature for polaris
Power saving feature which reduces the amount of
voltage needed for specific engine clocks.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:42 -04:00
Rex Zhu
92d1576859 drm/amdgpu/gfx8: update golden setting for polaris10
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:42 -04:00
Rex Zhu
432c3a3ca7 drm/amd/powerplay: enable avfs feature for polaris
avfs feature is for voltage control based on
gpu system clock on polaris10

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:41 -04:00
Rex Zhu
c11cb70483 drm/amdgpu/atombios: add avfs struct for Polaris10/11
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:41 -04:00
Rex Zhu
31b2124377 drm/amd/powerplay: add avfs related define for polaris
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:40 -04:00
Rex Zhu
9a3c1b342b drm/amd/powrplay: enable stutter_mode for polaris.
To minimize the dram power expenditure during static -screen

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:40 -04:00
Rex Zhu
40787ef21c drm/amd/powerplay: disable UVD SMU handshake for MCLK.
sync up with internal programming recommendations.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:39 -04:00
Rex Zhu
a2fb4934e9 drm/amd/powerplay: initialize variables which were missed.
Missing pcie dpm settings.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:38 -04:00
Rex Zhu
919e334dec drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21 10:22:38 -04:00
Rex Zhu
0a4fef559b drm/amd/powerplay: need to notify system bios pcie device ready
before request performance state.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-06-21 10:22:37 -04:00
Rex Zhu
576b4401b1 drm/amd/powerplay: fix bug that function parameter was incorect.
Wrong value passed to acpi_pcie_perf_request.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-06-21 10:22:37 -04:00
Rex Zhu
1d7b84d12a drm/amd/powerplay: fix logic error.
the error lead powerplay can't get display info in DGPU case.
store_cc6_data just implement in APU.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-06-21 10:22:29 -04:00
Boris Brezillon
0b1e1eb762 drm: atmel-hlcdc: Fix OF graph parsing
atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases
the node (using of_node_put()) after each iteration, which is wrong
since for_each_endpoint_of_node() is already taking care of that.

Move the of_node_put() call in the error path.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 17a8e03e7e ("drm: atmel-hlcdc: rework the output code to support drm bridges")
2016-06-21 14:15:45 +02:00
Boris Brezillon
1b7e38b92b drm: atmel-hlcdc: actually disable scaling when no scaling is required
The driver is only enabling scaling, but never disabling it, thus, if you
enable the scaling feature once it stays enabled forever.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 1a396789f6 ("drm: add Atmel HLCDC Display Controller support")
Cc: <stable@vger.kernel.org>
2016-06-21 14:15:11 +02:00
Nicolas Iooss
29b9c528b8 drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
amdgpu_cgs_acpi_eval_object() returned the value of variable "result"
without initializing it first.

This bug has been found by compiling the kernel with clang.  The
compiler complained:

    drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable
    'result' is used uninitialized whenever 'for' loop exits because its
    condition is false [-Werror,-Wsometimes-uninitialized]
            for (i = 0; i < count; i++) {
                        ^~~~~~~~~
    drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized
    use occurs here
            return result;
                   ^~~~~~
    drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the
    condition if it is always true
            for (i = 0; i < count; i++) {
                        ^~~~~~~~~
    drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the
    variable 'result' to silence this warning
            int result;
                      ^
                       = 0

Fixes: 3f1d35a03b ("drm/amdgpu: implement new cgs interface for acpi
function")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-20 17:09:39 -04:00
Dan Carpenter
48a70e1ca8 drm/amdgpu: precedence bug in amdgpu_device_init()
! has higher precedence than bitwise & so we need to add parenthesis
for this to work as intended.

Fixes: 048765ad5a ('amdgpu: fix asic initialization for virtualized environments (v2)')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-20 17:06:10 -04:00
David Miller
ef0dab4aae PCI: Fix unaligned accesses in VC code
The save/restore buffers for VC state is first composed of a 2-byte control
register, then a bunch of 4-byte words.

This causes unaligned accesses which trap on platform such as sparc.

This is easy to fix by simply moving the buffer pointer forward by 4 bytes
instead of 2 after dealing with the control register.  The length
adjustment needs to be changed likewise as well.

Fixes: 5f8fc43217 ("PCI: Include pci/pcie/Kconfig directly from pci/Kconfig")
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.6+
2016-06-20 13:24:20 -05:00
Linus Torvalds
67016f6cdf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "A couple more of d_walk()/d_subdirs reordering fixes (stable fodder;
  ought to solve that crap for good) and a fix for a brown paperbag bug
  in d_alloc_parallel() (this cycle)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix idiotic braino in d_alloc_parallel()
  autofs races
  much milder d_walk() race
2016-06-20 10:41:51 -07:00
Linus Torvalds
f780f00d72 Two fixes for the tracing system.
o When trace_printk() is used with a non constant format descriptor,
    it adds a NULL pointer into the trace format section, and the code
    isn't prepared to deal with it. This bug appeared by a change that
    was added in v3.5.
 
  o The ftracetest (selftests section) can't handle testing histograms
    when histograms are not configured. Currently it shows that they
    fail the test, when they should state that they are unsupported.
    This bug was added in the 4.7 merge window with the addition of
    the historgram code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXZ/TGAAoJEKKk/i67LK/8OKEH/2pRnbWFh2EHScrhUgpnzzsn
 9BSrxsON82KZtaRIl7QOCBXO8XGKdEfRzf6nz85q6I7GghURuzoGPpJ65YTx+InL
 Ksg3TVIVPzMTRMoHQRMO6LNaX2Ks76KeyWxA8T7ib6qJFLJjHkgTYg/NE5A7cnNl
 dNdz09GpHAgRt5zfETe/oS7pfc76w6x5wWSlt7oaeBXhY3goeq7WnX+/hqX3+/QI
 fLlvJi8A8K0PY+xx9Tn/k1mn74cRuT475grHyyypWeEgo7HNU4CjLXKlZclT2hvX
 qzv7tmJwccMmEVF0mdEpCttHmnnniJd8oZg4OQK/V3DX1RLKLMEz6OFUwBmXcbw=
 =z/B5
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Two fixes for the tracing system:

   - When trace_printk() is used with a non constant format descriptor,
     it adds a NULL pointer into the trace format section, and the code
     isn't prepared to deal with it.  This bug appeared by a change that
     was added in v3.5.

   - The ftracetest (selftests section) can't handle testing histograms
     when histograms are not configured.  Currently it shows that they
     fail the test, when they should state that they are unsupported.
     This bug was added in the 4.7 merge window with the addition of the
     historgram code"

* tag 'trace-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Fix hist unsupported result in hist selftests
  tracing: Handle NULL formats in hold_module_trace_bprintk_format()
2016-06-20 10:35:48 -07:00
Linus Torvalds
97f78c7de8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
 "Two more bugs fixes for 4.7:

   - a KVM regression introduced with the pgtable.c code split

   - a perf issue with two hardware PMUs using a shared event context"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpum_cf: use perf software context for hardware counters
  KVM: s390/mm: Fix CMMA reset during reboot
2016-06-20 10:18:58 -07:00
Linus Torvalds
4e183d7add Two stability fixes plus a security fix for the dell-smm driver
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXZ3TjAAoJEMsfJm/On5mBu0sQAIkMoxVzRCSY3pu8cR16+aeV
 9cO2GchnRBSGZX3iRgOGevuHVnIxqaZqODM7Oeb0OkeYDQT+u2AhWuHfSwQSuJNA
 srvDcXUJ0rMA7hbTubr1vPDZLE4jHOWcm7ybXZ5LoJnDLBhRENiTrezP1ER6AmOf
 nqMzgABEXEmKr2v1+jWp+hvAGrgRMVJ9V4FMCXlLGZKW7MLsfgI1enUjYXjUghVZ
 +ictH44RrIy/CA57tlzbf/OjVumay9zD7Pagngq/dB6TwQR4KUGEgiEKMSVcJ+rc
 2NM7FP1E4UDAZrbN268T806sZlj4yNH3itZvqnmRhJcOxo3t/a7/EDxKyJjfq33o
 CjYARl3VaOc1oXgJJ711EZKW8zJmV41ckdUj8d7gGJta1RW3KEkDSq/I/p9bmqBL
 r/HFbP3zcR3M3H9evbk4PWrdtfFL744dT7NadZReD6pEvH+yCROpo95UQoUZCzV2
 4ZNb0H9f91J0eZulhkIK//oXBuJBp3a6Ac0pBzgZra4kiX4bGD6fOX245W/R6JoQ
 NuQ+leOk8u+K8YH8It6O8ViR/ojlNqIvjlOiWE3CuPaeG+ProrOeuzM1/YeQ7dfQ
 2x6JXB9GWUYpO+Az37aKU7B8WcPcPoL8hxNovDvPU2ky9quv2GfFRk0GLrvpjHXu
 4uEr9KNrTDLMnoqbSUCj
 =56up
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Two stability fixes plus a security fix for the dell-smm driver"

* tag 'hwmon-for-linus-v4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (dell-smm) Disallow fan_type() calls on broken machines
  hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default
  hwmon: (dell-smm) Fail in ioctl I8K_BIOS_VERSION when bios version is not a number
2016-06-20 10:04:12 -07:00
Al Viro
e7d6ef9790 fix idiotic braino in d_alloc_parallel()
Check for d_unhashed() while searching in in-lookup hash was absolutely
wrong.  Worse, it masked a deadlock on dget() done under bitlock that
nests inside ->d_lock.  Thanks to J. R. Okajima for spotting it.

Spotted-by: "J. R. Okajima" <hooanon05g@gmail.com>
Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-20 10:07:42 -04:00
Steven Rostedt (Red Hat)
0ded5174e9 ftracetest: Fix hist unsupported result in hist selftests
When histograms are not configured in the kernel, the ftracetest histogram
selftests should return "unsupported" and not "Failed". To detect this, the
test scripts have:

 FEATURE=`grep hist events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "hist trigger is not supported"
     exit_unsupported
 fi

The problem is that '-e' is in effect and any error will cause the program
to terminate. The grep for 'hist' fails, because it is not compiled it (thus
unsupported), but because grep has an error code for failing to find the
string, it causes the program to terminate, and is marked as a failed test.

Namhyung Kim recommended to test for the "hist" file located in
events/sched/sched_process_fork/hist instead, as it is more inline with the
other checks. As the hist file is only created if the histogram feature is
enabled, that is a valid check.

Link: http://lkml.kernel.org/r/20160523151538.4ea9ce0c@gandalf.local.home

Suggested-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 76929ab51f ("kselftests/ftrace: Add hist trigger testcases")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:46:21 -04:00
Steven Rostedt (Red Hat)
70c8217acd tracing: Handle NULL formats in hold_module_trace_bprintk_format()
If a task uses a non constant string for the format parameter in
trace_printk(), then the trace_printk_fmt variable is set to NULL. This
variable is then saved in the __trace_printk_fmt section.

The function hold_module_trace_bprintk_format() checks to see if duplicate
formats are used by modules, and reuses them if so (saves them to the list
if it is new). But this function calls lookup_format() that does a strcmp()
to the value (which is now NULL) and can cause a kernel oops.

This wasn't an issue till 3debb0a9dd ("tracing: Fix trace_printk() to print
when not using bprintk()") which added "__used" to the trace_printk_fmt
variable, and before that, the kernel simply optimized it out (no NULL value
was saved).

The fix is simply to handle the NULL pointer in lookup_format() and have the
caller ignore the value if it was NULL.

Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.com

Reported-by: xingzhen <zhengjun.xing@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 3debb0a9dd ("tracing: Fix trace_printk() to print when not using bprintk()")
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:46:12 -04:00