Factor the code to go from a gpiochip label + pin-numer to a gpio_desc
out of x86_acpi_irq_helper_get() and make it into a new
x86_android_tablet_get_gpiod() helper, as this will be necessary in some
x86_dev_info.init() functions too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-3-hdegoede@redhat.com
Add properties describing the battery on the Asus ME176C / TF103C
tablets. The max constant charge volt / current settings were taken
from the factory Android image on these tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-2-hdegoede@redhat.com
power_supply_get_battery_info() which is used by charger and fuel-gauge
drivers on x86-android-tablets, expects the battery properties to be
described in a stand-alone battery fwnode which is then referenced
from both the charger and fuel-gauge device's fwnodes.
Add support for registering + unregistering a swnode for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220205191356.225505-1-hdegoede@redhat.com
The fan curve control patches introduced a regression for at least the
TUF FX506 and possibly other TUF series laptops that do not have support
for fan curve control.
As part of the probing process, asus_wmi_evaluate_method_buf is called
to get the factory default fan curve . The WMI management function
returns 0 on certain laptops to indicate lack of fan curve control
instead of ASUS_WMI_UNSUPPORTED_METHOD. This 0 is transformed to
-ENODATA which results in failure when probing.
Fixes: 0f0ac158d2 ("platform/x86: asus-wmi: Add support for custom fan curves")
Reported-and-tested-by: Abhijeet V <abhijeetviswa@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220205112840.33095-1-hdegoede@redhat.com
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2631712.mvXUDI8C0e@kreacher
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for
it to the fan_quirk_table[] so that both fans can be controllerd.
Reported-and-tested-by: David Dreschner <david@dreschner.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220203103302.49401-1-hdegoede@redhat.com
the other patches from the "[PATCH v6 0/9] Support Spi in
i2c-multi-instantiate driver" series.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmH6vlwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3sAf+JoNPIvjcZLsrl1Xf5mk44c7Qg0BL
uknI7jj3FJem65uG4PKkB0SQ2Ysd5TfH0NQaUG3oiq+YqPJUjIm2qtsyBOT/cUWP
3EcCjX8/kYBtotTU3t16ciZCKXHW9zNvxTttUQJdDLEWyRLZ8RlRBTvcATdNK9DA
POA/f+Dh0PBhPFf4V5/XjylELNLAvzK+rYk2IdrGCSe6P3DOJU7M96qRHM7JQSym
tfxswPRwCDNr4A/3yRnI+N1XKwEdoEpiGIY2cXqoSzIePRjzvsxby9wLSuG4wp95
2/AUj4G9biQMsUSZoyeNU4henoNtUnUn8DOYa1ZaYxXl4nh04yICrqfLLg==
=njf6
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-serial-multi-instantiate-1' into review-hans
This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag +
the other patches from the "[PATCH v6 0/9] Support Spi in
i2c-multi-instantiate driver" series.
The ACPI device with CSC3551 or CLSA0100 are sound cards
with multiple instances of CS35L41 connected by I2C or SPI
to the main CPU.
We add an ID to the ignore_serial_bus_ids list to enumerate
all I2C or SPI devices correctly.
The same IDs are also added into serial-multi-instantiate
so that the driver can correctly enumerate the ACPI.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121172431.6876-10-sbinding@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for spi bus in serial-multi-instantiate driver
Some peripherals can have either a I2C or a SPI connection
to the host (but not both) but use the same HID for both
types. So it is not possible to use the HID to determine
whether it is I2C or SPI. The driver must check the node
to see if it contains I2cSerialBus or SpiSerialBus entries.
For backwards-compatibility with the existing nodes I2C is
checked first and if such entries are found ONLY I2C devices
are created. Since some existing nodes that were already
handled by this driver could also contain unrelated
SpiSerialBus nodes that were previously ignored, and this
preserves that behavior. If there is ever a need to handle
a node where both I2C and SPI devices must be instantiated
this can be added in future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121172431.6876-8-sbinding@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reorganize I2C functions to accommodate SPI support
Split the probe and factor out parts of the code
that will be used in the SPI support
Also switched from strlcpy() to strscpy()
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121172431.6876-7-sbinding@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename I2C multi instantiate driver to serial-multi-instantiate for
upcoming addition of SPI support
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121172431.6876-6-sbinding@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lenovo AMD based platforms have been offering platform_profiles but they
are not working correctly. This is because the mode we are using on the
Intel platforms (MMC) is not available on the AMD platforms.
This commit adds checking of the functional capabilities returned by the
BIOS to confirm if MMC is supported or not. Profiles will not be
available if the platform is not MMC capable.
I'm investigating and working on an alternative for AMD platforms but
that is still work-in-progress.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Yellow carp has been outputting versions like `1093.24.0`, but this
is supposed to be 69.24.0. That is the MSB is being interpreted
incorrectly.
The MSB is not part of the major version, but has generally been
treated that way thus far. It's actually the program, and used to
distinguish between two programs from a similar family but different
codebase.
Link: https://patchwork.freedesktop.org/patch/469993/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220120174439.12770-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
tf103c_dock_hid_ll_driver and tf103c_dock_pm_ops are not used outside of
the driver, make them both static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220117112644.260168-2-hdegoede@redhat.com
amd_pmc_stb_debugfs_fops is not used outside of amd-pmc.c, make it
static.
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220117112644.260168-1-hdegoede@redhat.com
As reported:
[ 256.104522] ======================================================
[ 256.113783] WARNING: possible circular locking dependency detected
[ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted
[ 256.125362] ------------------------------------------------------
[ 256.131673] intel-speed-sel/844 is trying to acquire lock:
[ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common]
[ 256.147171]
[ 256.147171] but task is already holding lock:
[ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170
[ 256.160407]
[ 256.160407] which lock already depends on the new lock.
[ 256.160407]
[ 256.168712]
[ 256.168712] the existing dependency chain (in reverse order) is:
[ 256.176327]
[ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}:
[ 256.181946] lock_acquire+0x1e6/0x330
[ 256.186265] __mutex_lock+0x9b/0x9b0
[ 256.190497] mutex_lock_nested+0x1b/0x20
[ 256.195075] misc_register+0x32/0x1a0
[ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common]
[ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio]
...
[ 256.241976]
[ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}:
[ 256.248552] validate_chain+0xbc6/0x1750
[ 256.253131] __lock_acquire+0x88c/0xc10
[ 256.257618] lock_acquire+0x1e6/0x330
[ 256.261933] __mutex_lock+0x9b/0x9b0
[ 256.266165] mutex_lock_nested+0x1b/0x20
[ 256.270739] isst_if_open+0x18/0x90 [isst_if_common]
[ 256.276356] misc_open+0x100/0x170
[ 256.280409] chrdev_open+0xa5/0x1e0
...
The call sequence suggested that misc_device /dev file can be opened
before misc device is yet to be registered, which is done only once.
Here punit_misc_dev_lock was used as common lock, to protect the
registration by multiple ISST HW drivers, one time setup, prevent
duplicate registry of misc device and prevent load/unload when device
is open.
We can split into locks:
- One which just prevent duplicate call to misc_register() and one
time setup. Also never call again if the misc_register() failed or
required one time setup is failed. This lock is not shared with
any misc device callbacks.
- The other lock protects registry, load and unload of HW drivers.
Sequence in isst_if_cdev_register()
- Register callbacks under punit_misc_dev_open_lock
- Call isst_misc_reg() which registers misc_device on the first
registry which is under punit_misc_dev_reg_lock, which is not
shared with callbacks.
Sequence in isst_if_cdev_unregister
Just opposite of isst_if_cdev_register
Reported-and-tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver as originally submitted accidentally relied on Android having
run before and Android having unmasked the 2nd level IRQ-mask for the
charger IRQ. This worked since these are PMIC registers which are only
reset when the battery is fully drained or disconnected.
Fix the charger IRQ no longer working after loss of battery power by
properly setting the 2nd level IRQ-mask for the charger IRQ.
Note this removes the need to enable/disable our parent IRQ which just
sets the mask bit in the 1st level IRQ-mask register, setting one of
the 2 level masks is enough to stop the IRQ from getting reported.
Fixes: 761db353d9 ("platform/x86: Add intel_crystal_cove_charger driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220111232309.377642-1-hdegoede@redhat.com
Some ThinkPad models, like the X1 Tablet 1st and 2nd Gen, are passively
cooled without any fan. Currently, an entry in /proc/acpi/ibm/fan is
nevertheless created, and misleadingly shows
status: enabled
speed: 65535
level: auto
This patch adds a TPACPI_FAN_NOFAN quirk definition and corresponding
handling to not initialize a fan interface at all.
For the time being, the quirk is only applied for X1 Tablet 2nd Gen
(types 20JB, 20JC; EC N1O...); further models (such as Gen1, types 20GG
and 20GH) can be added easily once tested.
Tested on a 20JCS00C00, BIOS N1OET58W (1.43), EC N1OHT34W.
Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/12d4b825-a2b9-8cb7-6ed3-db4d66f46a60@a-kobel.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1.
Signed-off-by: Yuka Kawajiri <yukx00@gmail.com>
Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This switches the P10T tablet to "Android" mode, where the Home button
sends a single sancode instead of a Windows-specific key combination and
the other button doesn't disable the Wi-Fi.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20220110063512.273252-1-lkundrak@v3.sk
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The individual gpiod_lookup_table structs cannot be const because they
contain a list-head which gets used when registering them.
But the array of pointers to the gpiod_lookup_table-s used by a board
can be const, constify these.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-3-hdegoede@redhat.com
Add an init() callback to struct x86_dev_info, board descriptions can use
this to do some custom setup before registering the i2c_clients, platform-
devices and servdevs.
Also add an exit() callback to also allow for cleanup of the custom setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-2-hdegoede@redhat.com
Some of the broken DSDTs on these devices often also include broken / wrong
_AEI (ACPI Event Interrupt) handlers, which can cause e.g. interrupt storms
by listening to a floating GPIO pin.
Add support for disabling these and disable them on the Asus ME176C and
TF103C tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-By: Lubomir Rintel <lkundrak@V3.sk>
Link: https://lore.kernel.org/r/20220110103952.48760-1-hdegoede@redhat.com
Remove PDE_DATA() completely and replace it with pde_data().
[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]
Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant
subsystems all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYd7deA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym8ngCgw0ANwrRPE5b1dthEmfU2f8Knk5kAn0pHQv6R
VRZJypgNfU/Pt0ykstZD
=CO9J
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
Highlights:
- new drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on these)
- amd-pmc:
- bug-fixes
- smar trace buffer support
- asus-wmi: support for custom fan curves
- int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor I2C
clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
- thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
- think_lmi: enhanced BIOS password support
- various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- delay enumeration of devices with a _DEP pointing to an INT3472 device
Add Asus TF103C dock driver:
- Add Asus TF103C dock driver
Add intel_crystal_cove_charger driver:
- Add intel_crystal_cove_charger driver
Documentation:
- syfs-class-firmware-attributes: Lenovo Opcode support
Merge tag 'platform-drivers-x86-int3472-1' into review-hans:
- Merge tag 'platform-drivers-x86-int3472-1' into review-hans
amd-pmc:
- only use callbacks for suspend
- Add support for AMD Smart Trace Buffer
- Simplify error handling and store the pci_dev in amd_pmc_dev structure
- Fix s2idle failures on certain AMD laptops
- Make CONFIG_AMD_PMC depend on RTC_CLASS
apple-gmux:
- use resource_size() with res
asus-wmi:
- Reshuffle headers for better maintenance
- Split MODULE_AUTHOR() on per author basis
- Join string literals back
- remove unneeded semicolon
- Add support for custom fan curves
dell-wmi-descriptor:
- disable by default
hp_accel:
- Use SIMPLE_DEV_PM_OPS() for PM ops
- Fix an error handling path in 'lis3lv02d_probe()'
i2c:
- acpi: Add i2c_acpi_new_device_by_fwnode() function
- acpi: Use acpi_dev_ready_for_enumeration() helper
int3472:
- Add board data for Surface Go 3
- Deal with probe ordering issues
- Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
- Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
- Add get_sensor_adev_and_name() helper
- Split into 2 drivers
intel-uncore-frequency:
- use default_groups in kobj_type
intel_pmc_core:
- fix memleak on registration failure
leds:
- simatic-ipc-leds: add new driver for Siemens Industial PCs
lenovo-yogabook-wmi:
- Add support for hall sensor on the back
- Add driver for Lenovo Yoga Book
lg-laptop:
- Recognize more models
platform:
- surface: Propagate ACPI Dependency
platform/mellanox:
- mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
- mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
platform/surface:
- aggregator_registry: Rename device registration function
- aggregator_registry: Use generic client removal function
- aggregator: Make client device removal more generic
platform/x86/intel:
- Remove X86_PLATFORM_DRIVERS_INTEL
- hid: add quirk to support Surface Go 3
platform_data:
- Add linux/platform_data/tps68470.h file
pmc_atom:
- improve critclk_systems matching for Siemens PCs
power:
- supply: Provide stubs for charge_behaviour helpers
- supply: fix charge_behaviour attribute initialization
- supply: add helpers for charge_behaviour sysfs
- supply: add charge_behaviour attributes
samsung-laptop:
- Fix typo in a comment
simatic-ipc:
- add main driver for Siemens devices
system76_acpi:
- Guard System76 EC specific functionality
think-lmi:
- Prevent underflow in index_store()
- Simplify tlmi_analyze() error handling a bit
- Move kobject_init() call into tlmi_create_auth()
- Opcode support
- Abort probe on analyze failure
thinkpad_acpi:
- support inhibit-charge
- support force-discharge
- Add lid_logo_dot to the list of safe LEDs
- Add LED_RETAIN_AT_SHUTDOWN to led_class_devs
- Remove unused sensors_pdev_attrs_registered flag
- Fix the hwmon sysfs-attr showing up in the wrong place
- tpacpi_attr_group contains driver attributes not device attrs
- Register tpacpi_pdriver after subdriver init
- Restore missing hotkey_tablet_mode and hotkey_radio_sw sysfs-attr
- Fix thermal_temp_input_attr sorting
- Remove "goto err_exit" from hotkey_init()
- Properly indent code in tpacpi_dytc_profile_init()
- Cleanup dytc_profile_available
- Simplify dytc_version handling
- Make *_init() functions return -ENODEV instead of 1
- Accept ibm_init_struct.init() returning -ENODEV
- Convert platform driver to use dev_groups
- fix documentation for adaptive keyboard
- Fix WWAN device disabled issue after S3 deep
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- v1.11 release
- Update max frequency
touchscreen_dmi:
- Remove the Glavey TM800A550L entry
- Enable pen support on the Chuwi Hi10 Plus and Pro
- Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
- Add TrekStor SurfTab duo W1 touchscreen info
watchdog:
- simatic-ipc-wdt: add new driver for Siemens Industrial PCs
wmi:
- Add no_notify_data flag to struct wmi_driver
- Fix driver->notify() vs ->probe() race
- Replace read_takes_no_args with a flags field
x86-android-tablets:
- Fix GPIO lookup leak on error-exit
- Add TM800A550L data
- Add Asus MeMO Pad 7 ME176C data
- Add Asus TF103C data
- Add support for preloading modules
- Add support for registering GPIO lookup tables
- Add support for instantiating serdevs
- Add support for instantiating platform-devs
- Add support for PMIC interrupts
- Don't return -EPROBE_DEFER from a non probe() function
- New driver for x86 Android tablets
x86/platform/uv:
- use default_groups in kobj_type
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHcCbkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9y3yAf/Xo8TWsnF7XoS3pNCqRcObIulHy6u
9AOD4gTb0p9LiAd8WN75UsQDew0Rib+UDTS3s6g9l71fMzpTFOD4IaBPrVAmIxpu
Qs9raFTH67CFid/V3DCwAjPQYxxp5LBGvYJ4oy3OmaYHieV9jdsvNLISlpi/V8wR
PmbmYtiK5TPZwRT+mknq89D+LynP2NYkvoqRitmB7MrAvxY3c0ssrex6dXMrdgqK
ehRtfz/ER8xQ03APIzHG+ec73LZsHCMDDG7teas4tiMlMaWGgRO2I8GAudjuPEoy
mBTSb3ABuEud8LTMgjB+trM2w9IAoFE0L6/OrKE5dK1tPdaLxvCuuSVheQ==
=tmPR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
New drivers:
- asus-tf103c-dock
- intel_crystal_cove_charger
- lenovo-yogabook-wmi
- simatic-ipc platform-code + led driver + watchdog driver
- x86-android-tablets (kernel module to workaround DSDT bugs on
these)
amd-pmc:
- bug-fixes
- smar trace buffer support
asus-wmi:
- support for custom fan curves
int3472 (camera info ACPI object for Intel IPU3/SkyCam cameras):
- ACPI core + int3472 changes to delay enumeration of camera sensor
I2C clients until the PMIC for the sensor has been fully probed
- Add support for board data (DSDT info is incomplete) for setting up
the tps68470 PMIC used on some boards with these cameras
- Add board data for the Microsoft Surface Go (original, v2 and v3)
thinkpad_acpi:
- various cleanups
- support for forced battery discharging (for battery calibration)
- support to inhibit battery charging
- this includes power_supply core changes to add new APIs for this
think_lmi:
- enhanced BIOS password support
various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (78 commits)
power: supply: Provide stubs for charge_behaviour helpers
platform/x86: x86-android-tablets: Fix GPIO lookup leak on error-exit
platform/x86: int3472: Add board data for Surface Go 3
platform/x86: Add Asus TF103C dock driver
platform/x86: x86-android-tablets: Add TM800A550L data
platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
platform/x86: x86-android-tablets: Add Asus TF103C data
platform/x86: x86-android-tablets: Add support for preloading modules
platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
platform/x86: x86-android-tablets: Add support for instantiating serdevs
platform/x86: x86-android-tablets: Add support for instantiating platform-devs
platform/x86: x86-android-tablets: Add support for PMIC interrupts
platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
platform/x86: touchscreen_dmi: Remove the Glavey TM800A550L entry
platform/x86: touchscreen_dmi: Enable pen support on the Chuwi Hi10 Plus and Pro
platform/x86: touchscreen_dmi: Correct min/max values for Chuwi Hi10 Pro (CWI529) tablet
platform/x86: Add intel_crystal_cove_charger driver
power: supply: fix charge_behaviour attribute initialization
platform/x86: intel-uncore-frequency: use default_groups in kobj_type
x86/platform/uv: use default_groups in kobj_type
...
-----BEGIN PGP SIGNATURE-----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=cCwW
-----END PGP SIGNATURE-----
Merge tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New sensor driver: ov5693
- A new driver for STM32 Chrom-ART Accelerator
- Added V4L2 core helper functions for VP9 codec
- Hantro driver has gained support for VP9 codecs
- Added support for Maxim MAX96712 Quad GMSL2 Deserializer
- The staging atomisp driver has gained lots of improvements, fixes and
cleanups. It now works with userptr
- Lots of random driver improvements as usual
* tag 'media/v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (397 commits)
media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
media: ipu3-cio2: Call cio2_bridge_init() before anything else
media: ipu3-cio2: Defer probing until the PMIC is fully setup
media: hantro: Add support for Allwinner H6
media: dt-bindings: allwinner: document H6 Hantro G2 binding
media: hantro: Convert imx8m_vpu_g2_irq to helper
media: hantro: move postproc enablement for old cores
media: hantro: vp9: add support for legacy register set
media: hantro: vp9: use double buffering if needed
media: hantro: add support for reset lines
media: hantro: Fix probe func error path
media: i2c: hi846: use pm_runtime_force_suspend/resume for system suspend
media: i2c: hi846: check return value of regulator_bulk_disable()
media: hi556: Support device probe in non-zero ACPI D state
media: ov5675: Support device probe in non-zero ACPI D state
media: imx208: Support device probe in non-zero ACPI D state
media: ov2740: support device probe in non-zero ACPI D state
media: ov5670: Support device probe in non-zero ACPI D state
media: ov8856: support device probe in non-zero ACPI D state
media: ov8865: Disable only enabled regulators on error path
...
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement
-----BEGIN PGP SIGNATURE-----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=MByd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights are support for privacy screens found in new laptops, a
bunch of nomodeset refactoring, and i915 enables ADL-P systems by
default, while starting to add RPL-S support.
vmwgfx adds GEM and support for OpenGL 4.3 features in userspace.
Lots of internal refactorings around dma reservations, and lots of
driver refactoring as well.
Summary:
core:
- add privacy screen support
- move nomodeset option into drm subsystem
- clean up nomodeset handling in drivers
- make drm_irq.c legacy
- fix stack_depot name conflicts
- remove DMA_BUF_SET_NAME ioctl restrictions
- sysfs: send hotplug event
- replace several DRM_* logging macros with drm_*
- move hashtable to legacy code
- add error return from gem_create_object
- cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER
- kernel.h related include cleanups
- support XRGB2101010 source buffers
ttm:
- don't include drm hashtable
- stop pruning fences after wait
- documentation updates
dma-buf:
- add dma_resv selftest
- add debugfs helpers
- remove dma_resv_get_excl_unlocked
- documentation
- make fences mandatory in dma_resv_add_excl_fence
dp:
- add link training delay helpers
gem:
- link shmem/cma helpers into separate modules
- use dma_resv iteratior
- import dma-buf namespace into gem helper modules
scheduler:
- fence grab fix
- lockdep fixes
bridge:
- switch to managed MIPI DSI helpers
- register and attach during probe fixes
- convert to YAML in several places.
panel:
- add bunch of new panesl
simpledrm:
- support FB_DAMAGE_CLIPS
- support virtual screen sizes
- add Apple M1 support
amdgpu:
- enable seamless boot for DCN 3.01
- runtime PM fixes
- use drm_kms_helper_connector_hotplug_event
- get all fences at once
- use generic drm fb helpers
- PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes
- add smart trace buffer (STB) for supported GPUs
- display debugfs entries
- new SMU debug option
- Documentation update
amdkfd:
- IP discovery enumeration refactor
- interface between driver fixes
- SVM fixes
- kfd uapi header to define some sysfs bitfields.
i915:
- support VESA panel backlights
- enable ADL-P by default
- add eDP privacy screen support
- add Raptor Lake S (RPL-S) support
- DG2 page table support
- lots of GuC/HuC fw refactoring
- refactored i915->gt interfaces
- CD clock squashing support
- enable 10-bit gamma support
- update ADL-P DMC fw to v2.14
- enable runtime PM autosuspend by default
- ADL-P DSI support
- per-lane DP drive settings for ICL+
- add support for pipe C/D DMC firmware
- Atomic gamma LUT updates
- remove CCS FB stride restrictions on ADL-P
- VRR platform support for display 11
- add support for display audio codec keepalive
- lots of display refactoring
- fix runtime PM handling during PXP suspend
- improved eviction performance with async TTM moves
- async VMA unbinding improvements
- VMA locking refactoring
- improved error capture robustness
- use per device iommu checks
- drop bits stealing from i915_sw_fence function ptr
- remove dma_resv_prune
- add IC cache invalidation on DG2
nouveau:
- crc fixes
- validate LUTs in atomic check
- set HDMI AVI RGB quant to full
tegra:
- buffer objects reworks for dma-buf compat
- NVDEC driver uAPI support
- power management improvements
etnaviv:
- IOMMU enabled system support
- fix > 4GB command buffer mapping
- close a DoS vector
- fix spurious GPU resets
ast:
- fix i2c initialization
rcar-du:
- DSI output support
exynos:
- replace legacy gpio interface
- implement generic GEM object mmap
msm:
- dpu plane state cleanup in prep for multirect
- dpu debugfs cleanups
- dp support for sc7280
- a506 support
- removal of struct_mutex
- remove old eDP sub-driver
anx7625:
- support MIPI DSI input
- support HDMI audio
- fix reading EDID
lvds:
- fix bridge DT bindings
megachips:
- probe both bridges before registering
dw-hdmi:
- allow interlace on bridge
ps8640:
- enable runtime PM
- support aux-bus
tx358768:
- enable reference clock
- add pulse mode support
ti-sn65dsi86:
- use regmap bulk write
- add PWM support
etnaviv:
- get all fences at once
gma500:
- gem object cleanups
kmb:
- enable fb console
radeon:
- use dma_resv_wait_timeout
rockchip:
- add DSP hold timeout
- suspend/resume fixes
- PLL clock fixes
- implement mmap in GEM object functions
- use generic fbdev emulation
sun4i:
- use CMA helpers without vmap support
vc4:
- fix HDMI-CEC hang with display is off
- power on HDMI controller while disabling
- support 4K@60Hz modes
- support 10-bit YUV 4:2:0 output
vmwgfx:
- fix leak on probe errors
- fail probing on broken hosts
- new placement for MOB page tables
- hide internal BOs from userspace
- implement GEM support
- implement GL 4.3 support
virtio:
- overflow fixes
xen:
- implement mmap as GEM object function
omapdrm:
- fix scatterlist export
- support virtual planes
mediatek:
- MT8192 support
- CMDQ refinement"
* tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits)
drm/amdgpu: no DC support for headless chips
drm/amd/display: fix dereference before NULL check
drm/amdgpu: always reset the asic in suspend (v2)
drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
drm/amd/display: Fix the uninitialized variable in enable_stream_features()
drm/amdgpu: fix runpm documentation
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
drm/amdgpu: save error count in RAS poison handler
drm/amdgpu: drop redundant semicolon
drm/amd/display: get and restore link res map
drm/amd/display: support dynamic HPO DP link encoder allocation
drm/amd/display: access hpo dp link encoder only through link resource
drm/amd/display: populate link res in both detection and validation
drm/amd/display: define link res and make it accessible to all link interfaces
drm/amd/display: 3.2.167
drm/amd/display: [FW Promotion] Release 0.0.98
drm/amd/display: Undo ODM combine
drm/amd/display: Add reg defs for DCN303
drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
drm/amd/display: Set optimize_pwr_state for DCN31
...
Fix leaking the registered gpiod_lookup tables when the kcalloc() for the
i2c_clients array fails.
Fixes: ef2ac11493 ("platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220108154947.136593-1-hdegoede@redhat.com
The Surface Go 3 needs some board data in order to configure the
TPS68470 PMIC - add entries to the tables in tps68470_board_data.c
that define the configuration that's needed.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20220106232045.41291-1-djrscally@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a driver for the keyboard, touchpad and USB port of
the keyboard dock for the Asus TF103C 2-in-1 tablet.
This keyboard dock has its own I2C attached embedded controller
and the keyboard and touchpad are also connected over I2C,
instead of using the usual USB connection. This means that the
keyboard dock requires this special driver to function.
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Ion Agorria <ion@agorria.com>
Cc: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211226141849.156407-1-hdegoede@redhat.com
The whitelabel (sold as various brands) TM800A550L tablets's DSDT contains
a whole bunch of bogus ACPI I2C devices and the ACPI node describing
the touchscreen is bad (the IRQ is missing). Enumeration of these is
skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the (now) missing I2C devices by
adding the necessary device info to the x86-android-tablets module,
including instantiating an actually working i2c-client for
the touchscreen.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-13-hdegoede@redhat.com
Asus MeMO Pad 7 ME176C tablets have an Android factory img with everything
hardcoded in the kernel instead of properly described in the DSDT.
Add support for manually instantiating all the missing I2C devices by
adding the necessary device info to the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-12-hdegoede@redhat.com
Asus TF103C tablets have an Android factory img with everything hardcoded
in the kernel instead of properly described in the DSDT.
Add support for manually instantiating all the missing I2C devices by
adding the necessary device info to the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-11-hdegoede@redhat.com
Since the x86-android-tablets code does all it work from module_init() it
cannot use -EPROBE_DEFER to wait for e.g. interrupt providing GPIO-chips
or PMIC-cells to show up.
To make sure things will still work when some necessary resource providers
are build as module allow the per board info to specify a list of modules
to pre-load before instantiating the I2C clients.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-10-hdegoede@redhat.com
Add support for instantiating platform-devs, note this also makes some
small changes to the i2c_client instantiating code to make the 2 flows
identical.
Specifically for the pdevs flow pdev_count must only be set after
allocating the pdevs array, to avoid a NULL ptr deref in
x86_android_tablet_cleanup() and the i2c_clients flow is updated
to work the same way.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-7-hdegoede@redhat.com
The Crystal Cove PMIC has a pin which can be used to connect the IRQ of
an external charger IC. On some boards this is used so we need a way to
look this up.
Note that the Intel PMICs have 2 levels of interrupts and thus
2 levels of IRQ domains all tied to a single fwnode.
Level 1 is the irqchip which demultiplexes the actual PMIC interrupt into
interrupts for the various MFD cells. Level 2 are the irqchips used in the
cell drivers which themselves export IRQs, such as the crystal_cove_gpio
driver, which de-multiplexes the level 2 interrupts for the GPIOs into
individual per GPIO IRQs.
The crystal_cove_charger driver registers an irqchip with a single IRQ for
the charger driver to consume. Note the MFD cell IRQ cannot be consumed
directly because the level 2 interrupts must be explicitly acked.
To allow finding the right IRQ domain when looking up the IRQ for
the charger, the crystal_cove_charger driver sets a DOMAIN_BUS_WIRED token
on its IRQ domain.
Add support for looking up the IRQ from the crystal_cove_charger driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-6-hdegoede@redhat.com
The x86-android-tablets code all runs from module_init, so returning
-EPROBE_DEFER is not appropriate. Instead log an error and bail.
This path should never get hit since PINCTRL_BAYTRAIL is a bool.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211229231431.437982-5-hdegoede@redhat.com
The Glavey TM800A550L tablet is a tablet which ships with Android as
factory OS. As such it has the typical broken DSDT which x86 Android
tablets tend to have.
Specifically the touchscreen ACPI device node is missing the IRQ for
the touchscreen. So far users were expected to fix this with a DSDT
overlay, but support for the TM800A550L has been added to the new
x86-android-modules kernel-module and that will now automatically
instantiate a proper i2c-client with the IRQ set for the touchscreen,
including the necessary device-properties for the firmware loading.
This means that the touchscreen_dmi entry for the TM800A550L is
no longer necessary (and it no longer matches either since the
touchscreen is no longer enumerated through ACPI), remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220103112700.111414-1-hdegoede@redhat.com
Both the Chuwi Hi10 Plus (CWI527) and the Chuwi Hi10 Pro (CWI529) tablets
support being used together with the Hi H2 pen.
Add the necessary properties to enable the new support for this in the
silead touchscreen driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225120247.95380-2-hdegoede@redhat.com
The firmware distributed as part of the Windows and Android drivers uses
significantly different min and max values for the x- and y-axis,
compared to the EFI's embedded touchscreen firmware.
The difference is large enough that e.g. typing on an onscreen keyboard
results in the wrong "keys" getting pressed.
Adjust the values to match those of the firmware distributed with the
Windows and Android drivers (which is necessary for pen support) and
put the EFI-fw version's min/max values in the new "silead,efi-fw-min-max"
property. The silead driver will use these when it is using the
EFI embedded firmware, so as to not regress functionality in that case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225120247.95380-1-hdegoede@redhat.com
Driver for the external-charger IRQ pass-through function of the
Intel Bay Trail Crystal Cove PMIC.
Note this is NOT a power_supply class driver, it just deals with IRQ
pass-through, this requires this separate driver because the PMIC's
level 2 interrupt for this must be explicitly acked.
This new driver gets enabled by the existing X86_ANDROID_TABLETS Kconfig
option because the x86-android-tablets module is the only consumer of the
exported external-charger IRQ.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211225115509.94891-5-hdegoede@redhat.com
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the uncore-frequency sysfs code to use default_groups field
which has been the preferred way since aa30f47cf6 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211229141454.2552950-1-gregkh@linuxfoundation.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the uv sysfs code to use default_groups field which has
been the preferred way since aa30f47cf6 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Justin Ernst <justin.ernst@hpe.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211229141332.2552428-1-gregkh@linuxfoundation.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
x86 tablets which ship with Android as (part of) the factory image
typically have various problems with their DSDTs. The factory kernels
shipped on these devices typically have device addresses and GPIOs
hardcoded in the kernel, rather then specified in their DSDT.
With the DSDT containing a random collection of devices which may or
may not actually be present as well as missing devices which are
actually present.
This driver, which loads only on affected models based on DMI matching,
adds DMI based instantiating of kernel devices for devices which are
missing from the DSDT, fixing e.g. battery monitoring, touchpads and/or
accelerometers not working.
Note the Kconfig help text also refers to "various fixes" ATM there are
no such fixes, but there are also known cases where entries are present
in the DSDT but they contain bugs, such as missing/wrong GPIOs. The plan
is to also add fixes for things like this here in the future.
This is the least ugly option to get these devices to fully work and to
do so without adding any extra code to the main kernel image (vmlinuz)
when built as a module.
Link: https://lore.kernel.org/platform-driver-x86/20211031162428.22368-1-hdegoede@redhat.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211223190750.397487-1-hdegoede@redhat.com
Various bug-fixes.
The following is an automated git shortlog grouped by driver:
amd-pmc:
- only use callbacks for suspend
apple-gmux:
- use resource_size() with res
intel_pmc_core:
- fix memleak on registration failure
platform/mellanox:
- mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
platform/x86/intel:
- Remove X86_PLATFORM_DRIVERS_INTEL
system76_acpi:
- Guard System76 EC specific functionality
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHFrasUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xjFwf+JXu2sjXMSa8u789EVr1bba7ZcuSm
PHnEDLrCyOOMsvEMNQ2p0OQt0kVvMrRwMt5K1q7MKCUsLZVif9Sey6UoQ/jlOKNK
pfwaodIkB32XVBVW5Wl+moiscO1btsaJ4an8giZ1ksmKZ5+w15FccJO9GfQHnc6c
ugIUBXAdgGMoB9bIUuMoSOFtvPJa9i2d2ltEKYI7xsUsmizbBRfNkbij8F/pcHrk
NMzk6ea6neTv3J+xPtweofxpMe+L243JpWJfJfE+xUrAix1lmc955uVUwalscq2g
s6kRsK19vcgVoKjiNsnEDYEBnVJvh0+IFEFwntPw42p37kOVX9t/nON3sg==
=8LDR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various bug-fixes"
* tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: fix memleak on registration failure
platform/x86/intel: Remove X86_PLATFORM_DRIVERS_INTEL
platform/x86: system76_acpi: Guard System76 EC specific functionality
platform/x86: apple-gmux: use resource_size() with res
platform/x86: amd-pmc: only use callbacks for suspend
platform/mellanox: mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
