Increase the packet header padding to include double VLAN tagging.
This patch uses a macro for this.
Fixes: 9cbc948b5a ("igb: add XDP support")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb XDP xmit back function should only return
defined error codes.
Fixes: 9cbc948b5a ("igb: add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Shay Agroskin says:
====================
XDP Redirect implementation for ENA driver
ENA is adding XDP Redirect support for its driver and some other
small tweaks.
This series adds the following:
- Make log messages in the driver have a uniform format using
netdev_* function
- Improve code readability
- Add support for XDP Redirect
====================
Link: https://lore.kernel.org/r/20201208180208.26111-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements the ndo_xdp_xmit() net_device function which is
called when a packet is redirected to this driver using an
XDP_REDIRECT directive.
The function receives an array of xdp frames that it needs to xmit.
The TX queues that are used to xmit these frames are the XDP
queues used by the XDP_TX flow. Therefore a lock is added to synchronize
both flows (XDP_TX and XDP_REDIRECT).
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP subsystem has a function to free XDP frames and their associated
pages. Using this function would help the driver's XDP implementation to
adjust to new changes in the XDP subsystem in the kernel (e.g.
introduction of XDP MB).
Also, remove 'xdp_rx_page' field from ena_tx_buffer struct since it is
no longer used.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a partial support for the XDP_REDIRECT directive which
instructs the driver to pass the packet to an interface specified by the
program. The directive is passed to the driver by calling bpf_redirect()
or bpf_redirect_map() functions from the eBPF program.
To lay the ground for integration with the existing XDP TX
implementation the patch removes the redundant page ref count increase
in ena_xdp_xmit_frame() and then decrease in ena_clean_rx_irq(). Instead
it only DMA unmaps descriptors for which XDP TX or REDIRECT directive
was received.
The XDP Redirect support is still missing .ndo_xdp_xmit function
implementation, which allows to redirect packet to an ENA interface,
which would be added in a later patch.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename the ena_xdp_xmit_buff() function to ena_xdp_xmit_frame() and pass
it an xdp_frame struct instead of xdp_buff.
This change lays the ground for XDP redirect implementation which uses
xdp_frames when 'xmit'ing packets.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce ena_increase_stat() function to increase statistics by a
certain number.
The function includes the
- lock aquire (on 32bit machines)
- stat increase
- lock release (on 32bit machines)
line sequence that is ubiquitous across the driver.
The function increases a single stat at a time and several stats which
are increased together weren't put into a function to avoid
calling the function several times for each stat which looks bad and
might decrease performance.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit fixes two nits, but it does not generate any change to binary
because of the optimization of gcc.
- use `count` instead of `channels->combined_count`
- change return type from `int` to `bool`
Also add spaces and change macro order in OR assignment to make the code
easier to read.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes some of the variables types to match the values they
hold. These wrong types fail some of our static checkers that search for
accidental conversions in our driver.
Signed-off-by: Ido Segev <idose@amazon.com>
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA logs are adjusted to display the full ENA representation to
distinct each ENA device in case of multiple interfaces.
Using netdev_err/warn and dev_info functions for logging provides
uniform printing with clear distinction of the device and interface.
This patch changes all printing in ena_com files to use netev_* logging
functions except for messages of info level. Log functions of that level
would be printed with dev_info because of the early stage they are
called in when net_device struct isn't yet registered.
To allow using netdev_* functions in all ena_com functions, a pointer to
the net_device was added to ena_com_dev struct.
The patch also adds some log messages to make driver debugging easier.
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The patch changes the maximum number of RX/TX queues it advertises to
the kernel (via alloc_etherdev_mq()) from a value received from the
device to a constant value which is the minimum between 128 and the
number of CPUs in the system.
By allocating the net_device struct with a constant number of queues,
the driver is able to allocate it at a much earlier stage, before
calling any ena_com functions. This would allow to make all log prints
in ena_com to use netdev_* log functions instead or current pr_* ones.
Note:
netdev_* prints in ena_com functions that are called before
net_device registration in ena_probe() might print messages that are
a bit ugly (with strings like "(unnamed net_device) (uninitialized)").
However we decided to use netdev_* prints in these functions anyway,
for the sake of getting better messages later, when ena_com functions
are called after ena_probe() form other parts of the driver.
See discussion about this decision in [1].
[1] http://www.mail-archive.com/netdev@vger.kernel.org/msg353590.html
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SM_RESET device only when loading full configuration and check
for BOOT_STATUS. Also remove polling for write trigger done in
_idtcm_settime().
Changes since v1:
-Correct warnings from strict checkpatch
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1607442117-13661-1-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a few more PHY mode changes for allwinner SoC based boards
with
a Realtek PHY after the driver changed its behavior, I assume there will
be more of these in the future. Also on for Allwinner, the Banana Pi
M2 board had a regression that led to some devices not working because
of a slightly incorrect voltage being applied.
By popular demand, I picked up a change from Krzysztof Kozlowski to
actually list the SoC tree in the MAINTAINERS file. We don't want to
get Cc'd on normal patches that are picked up by platform maintainers,
but the lack of an entry has led to confusion in the past.
All the other changes are fairly benign, fixing boot-time or
compile-time
warning messages in various places:
- A dtc warning on the OLPC XO-1.75
- A boot-time warning on i.MX6 wandboard
- A harmless compile-time warning
- A regression causing one of the i.MX6 SoCs to be
identified as another
- Missing SoC identification of Allwinner V3 and S3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=mn56
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a few more PHY mode changes for allwinner SoC based boards
with a Realtek PHY after the driver changed its behavior, I assume
there will be more of these in the future. Also on for Allwinner, the
Banana Pi M2 board had a regression that led to some devices not
working because of a slightly incorrect voltage being applied.
By popular demand, I picked up a change from Krzysztof Kozlowski to
actually list the SoC tree in the MAINTAINERS file. We don't want to
get Cc'd on normal patches that are picked up by platform maintainers,
but the lack of an entry has led to confusion in the past.
All the other changes are fairly benign, fixing boot-time or
compile-time warning messages in various places:
- A dtc warning on the OLPC XO-1.75
- A boot-time warning on i.MX6 wandboard
- A harmless compile-time warning
- A regression causing one of the i.MX6 SoCs to be identified as
another
- Missing SoC identification of Allwinner V3 and S3"
* tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: xilinx: Mark pm_api_features_map with static keyword
ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs
MAINTAINERS: add a limited ARM and ARM64 SoC entry
MAINTAINERS: correct SoC Git address (formerly: arm-soc)
ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITS
arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id
arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id
ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin
ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp
ARM: imx: Use correct SRC base address
ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY
ARM: dts: sun8i: v3s: fix GIC node memory range
ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node
ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator
ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY
ARM: dts: s3: pinecube: align compatible property to other S3 boards
ARM: sunxi: Add machine match for the Allwinner V3 SoC
arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet
When waiting for a notification and then processing it,
we also need to check the size of the data before we use
it. Most places do that already, but fix the remaining
ones to do it as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.b29573bcba39.I4b7e72824d06dc0719a40021d933e29edfc14713@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The range response notification has several versions. Check the
notification size according to the expected notification version.
Notifications with incorrect size will be ignored.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.ee57c3214d05.I810d7de33fb08001ef1a2e24714d5b68932e088e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Previously, we added checks that the contained MPDU size is long
enough, but really we should also check that the notification
itself fits into the data. Add some checks for that.
Also add unlikely() annotations on the previously added checks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.51cc04cf1e3e.I7bfd6809f8f5feb75f79397646e6656e95688a0e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the channel switch delay that we would incur after the channel
switch actually happens is longer than the quiet time we're willing
to tolerate, disconnect as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.3bc3449922da.Ib0255deb67b2fc21317e274adcacb545bb1dc669@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There are some races in the hardware that can possibly lead to
a bus lockup later during a restart when we manage to kill the
firmware at a bad time (while it's accessing the bus).
To work around this, add support for a new handshake between
firmware and driver to ensure that the firmware is in a well-
known state before we kill it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7756fcc9865c.I13de65e0ffcb4186dd4c1a465f66df2e98c9a947@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When we get a channel switch with a very long quiet period, we schedule
a work to disconnect after a while. This work runs in background. In the
meanwhile, we keep getting beacons and sending FW modify command for each.
This has a potential race, where we modify the CSA after we aborted it.
Protect the flow by setting csa_failed to true in case we abort, and check
it before sending the modify command.
This required a modification to the way we treat csa_failed in
iwl_mvm_post_channel_switch:
1. The variable isn't being reset anymore, so we can still look at it in
iwl_mvm_channel_switch_rx_beacon. This is fine, since we reset it when
starting a new CSA.
2. There is no more early return in case of csa_failed. This is fine,
since before this patch csa_failed was set only for GO, and for GO the
function is only resetting the power settings, which we want to restore
even in case of failure.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.b023856bdf39.I4ed0149e0018fe5e1ae3c2a1cbc614954016063f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We send some data to the firmware and expect to get it back,
but we shouldn't really trust the firmware on this. Check the
size of all the data we send down to avoid using bad or just
uninitialized data when the firmware doesn't respond right.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.a5a8173f16c7.I4fa68bb2b1c7dcc52ddd381c4042722d27c4a34d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't need the sequence/index/cmd_index unless we're doing
reclaim, they're not even valid in the other cases. Move the
variables and their assignments into the right if statement
and combine the two if statements into a single one as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.6207fdcc91a9.Ia71e766ead7560262f4bc6ad3da6f1117c498cd6@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's a bug in the lengths - the 'old length' needs to be calculated
using the 'old' pointer, of course, likely a copy/paste mistake. Fix
this.
Reported-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: cf29c5b66b ("iwlwifi: dbg_ini: implement time point handling")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.c0105ddffa74.I1ddb243053ff763c91b663748b6a593ecc3b5634@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We set this here, but don't really use it until we've
enabled interrupts. But when enabling interrupts we
always overwrite this value anyway, so remove setting
it here, mostly in order not to have some additional
code duplicated later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.135d96297aca.Id2d26fff60b6c31202bb0a36e46948bda6a39d33@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This is actually wrong, the bit used here by the image loader
is BIT(1), not BIT(2). The latter will be reused by the new
reset flow soon.
However, as we never had any complaints about not printing
the IML status or not handling the IML error interrupt (and
I suspect the code handling it was incorrectly anyway) just
remove the code for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.9a323f4a3493.Ic7aee4dbbf4be42287c338c2fa1b111473724116@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We keep the scan status per UID in scan_uid_status field when the
iwl_mvm_build_scan_cmd() function is called. If we error out after
this, e.g. due to FW restart being in progress, we're not cleaning
up properly, and can run into warnings later.
Clean up internal variables when starting fails after calling the
iwl_mvm_build_scan_cmd() function.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.970421a2f753.Id62b2da8a0ccccbb114407db82ca485d07749d39@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We're currently doing accounting on the queue sync with an
atomic variable that counts down the number of remaining
notifications that we still need.
As we've been hitting issues in this area, modify this to
track a bitmap of queues, not just the number of queues,
and print out the remaining bitmap in the warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.0a3fa177cd6b.I7c69ff999419368266279ec27dd618eb450908b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
For triggering an NMI in the firmware, we should only set BIT(24)
in the corresponding register, not the entire mask that's usable
by the driver.
This currently doesn't matter because the firmware only enables
BIT(24), but we'll start using BIT(25) for other purposes with an
upcoming API change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.2f982365d085.Id09daabfd331ba9e120abcbbedd2ad6448902ed0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If 12k A-MSDU size is requested, we will actually allocate 16k
due to page allocation. Thus, change it to actually mean 16k,
which is useful for certain sniffer use cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.84ae405829d4.I31184f4be31f7c3feb9a29aef3a111e70d15c64a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The argument type to iwl_mvm_notify_rx_queue() is currently just
a u8 *, but that's misleading because we actually need the inner
data to be of type struct iwl_mvm_internal_rxq_notif, because we
interpret it when we get it back from the device (to check the
sync bool and possibly the cookie.)
Therefore, clear up any potential confusion and require that the
data passed is of type struct iwl_mvm_internal_rxq_notif *.
Also, while at it, rename the "count" to "notif_size" as "count"
doesn't really clearly say what it's counting.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.d28e14682bdc.I9ac366aa97db045be4daa4ba263267a3ac6a6a2f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The MPDU contained in a notification shouldn't be larger than the
notification size itself is, validate this.
Reported-by: Haggai Abramovsky <haggai.abramovsky@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.7c721ad37014.Id5746874ecfa208b60baa62691b2d9dc5dd4d89c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
