Move the function to misc.c and give it a public header.
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the current code, CONFIG_ARCH_KEEP_MEMBLOCK is not set for MIPS arch,
memblock_discard() will discard memory and reserved arrays if they were
allocated, select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to give a chance to
track "memory" and "reserved" memblocks after early boot, with this patch,
we can see the following two sysfs interfaces under DEBUG_FS.
/sys/kernel/debug/memblock/memory
/sys/kernel/debug/memblock/reserved
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building mips tinyconfig with clang the following warning show up:
arch/mips/lib/uncached.c:45:6: warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
^~
arch/mips/lib/uncached.c:40:18: note: initialize the variable 'sp' to silence this warning
register long sp __asm__("$sp");
^
= 0
1 warning generated.
Rework to make an explicit inline move, instead of the non-standard use
of specifying registers for local variables. This is what's written
from the gcc-10 manual [1] about specifying registers for local
variables:
"6.47.5.2 Specifying Registers for Local Variables
.................................................
[...]
"The only supported use for this feature is to specify registers for
input and output operands when calling Extended 'asm' (*note Extended
Asm::). [...]".
[1] https://docs.w3cub.com/gcc~10/local-register-variables
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/XcxYACgkQJNaLcl1U
h9ApEgf/ZkKxj1Nq6RCfUqhyGK2u1ktzCpnugvjHebutXV1LD0y+y0/CnjdN5Vou
8r+BsX6izfEx6JuZyu1ryQcz+Rsp6VH6uK9e/vRPExIkkAw+JQzEGVzQRyrnREoA
eV8BO92YKrRtJM1HoIBnQOhoWMc/4Kqi7hklaiXDhHRDGpLcbTyeVK8ROarORLcy
aupt7WinLvbhP++xjs9YR/RffjpwxyxOkmkIaM9TpkKqADays+sBDCZXSVgFjQik
1rFLQ8jYAb/EOPNdCXrMEILrSaNMCz719vh2gZkm1yYQ3Tp5dH9WGqLROq9Oy/D4
FaCGJoxX0HUe7MWbJeI97PFZB8i2gQ==
=iCuN
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
'pnx,timeout' is unused, undocumented and 'pnx' is not a vendor prefix,
so let's remove it.
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Link: https://lore.kernel.org/r/20201210175238.2721550-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Enable unprivileged user namespace mounts of overlayfs. Overlayfs's
permission model (*) ensures that the mounter itself cannot gain additional
privileges by the act of creating an overlayfs mount.
This feature request is coming from the "rootless" container crowd.
(*) Documentation/filesystems/overlayfs.txt#Permission model
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When looking up an inode on the lower layer for which the mounter lacks
read permisison the metacopy check will fail. This causes the lookup to
fail as well, even though the directory is readable.
So ignore EACCES for the "userxattr" case and assume no metacopy for the
unreadable file.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In case the file cannot be opened with O_NOATIME because of lack of
capabilities, then clear O_NOATIME instead of failing.
Remove WARN_ON(), since it would now trigger if O_NOATIME was cleared.
Noticed by Amir Goldstein.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Comment above call already says this, but only EOPNOTSUPP is ignored, other
failures are not.
For example setting "user.*" will fail with EPERM on symlink/special.
Ignore this error as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Optionally allow using "user.overlay." namespace instead of
"trusted.overlay."
This is necessary for overlayfs to be able to be mounted in an unprivileged
namepsace.
Make the option explicit, since it makes the filesystem format be
incompatible.
Disable redirect_dir and metacopy options, because these would allow
privilege escalation through direct manipulation of the
"user.overlay.redirect" or "user.overlay.metacopy" xattrs.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
generic_file_splice_read() and iter_file_splice_write() will call back into
f_op->iter_read() and f_op->iter_write() respectively. These already do
the real file lookup and cred override. So the code in ovl_splice_read()
and ovl_splice_write() is redundant.
In addition the ovl_file_accessed() call in ovl_splice_write() is
incorrect, though probably harmless.
Fix by calling generic_file_splice_read() and iter_file_splice_write()
directly.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_ioctl_set_flags() does a capability check using flags, but then the
real ioctl double-fetches flags and uses potentially different value.
The "Check the capability before cred override" comment misleading: user
can skip this check by presenting benign flags first and then overwriting
them to non-benign flags.
Just remove the cred override for now, hoping this doesn't cause a
regression.
The proper solution is to create a new setxflags i_op (patches are in the
works).
Xfstests don't show a regression.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: dab5ca8fd9 ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
CAP_DAC_READ_SEARCH is required by open_by_handle_at(2) so check it in
ovl_decode_real_fh() as well to prevent privilege escalation for
unprivileged overlay mounts.
[Amir] If the mounter is not capable in init ns, ovl_check_origin() and
ovl_verify_index() will not function as expected and this will break index
and nfs export features. So check capability in ovl_can_decode_fh(), to
auto disable those features.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Call remap_verify_area() on the source file as well as the destination.
When called from vfs_dedupe_file_range() the check as already been
performed, but not so if called from layered fs (overlayfs, etc...)
Could ommit the redundant check in vfs_dedupe_file_range(), but leave for
now to get error early (for fear of breaking backward compatibility).
This call shouldn't be performance sensitive.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
cap_convert_nscap() does permission checking as well as conversion of the
xattr value conditionally based on fs's user-ns.
This is needed by overlayfs and probably other layered fs (ecryptfs) and is
what vfs_foo() is supposed to do anyway.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
The m_can driver's suspend and resume functions (m_can_class_suspend() and
m_can_class_resume()) make use of dev_get_drvdata() and assume that the drvdata
is a pointer to the struct net_device.
With upcoming conversion of the tcan4x5x driver to pm_runtime this assumption
is no longer valid. As the suspend and resume functions actually need a struct
m_can_classdev pointer, change the m_can_platform and the m_can_pci driver to
hold a pointer to struct m_can_classdev instead, as the tcan4x5x driver already
does.
Link: https://lore.kernel.org/r/20201212175518.139651-8-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch enhances m_can_class_allocate_dev() to allocate driver specific
private data. The driver's private data struct must contain struct
m_can_classdev as its first member followed by the remaining private data.
Link: https://lore.kernel.org/r/20201212175518.139651-7-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With patch
| dd8088d5a8 PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter
the usual pm_runtime_get_sync() and pm_runtime_put_noidle() in-case-of-error
dance is no longer needed. Convert the m_can driver to use this function.
Link: https://lore.kernel.org/r/20201212175518.139651-6-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The function m_can_config_endisable() is not used outside of the m_can driver,
so mark it as static.
Link: https://lore.kernel.org/r/20201212175518.139651-5-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch coverts the m_can driver to use cdev as name for struct
m_can_classdev uniformly throughout the whole driver.
Link: https://lore.kernel.org/r/20201212175518.139651-4-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch converts the indention in the m_can driver to kernel coding style.
Link: https://lore.kernel.org/r/20201212175518.139651-3-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Old versions of the user manual are regularly depublished, so change link to
the linux-can github page, which has a mirror off all published datasheets.
Link: https://lore.kernel.org/r/20201212175518.139651-2-mkl@pengutronix.de
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Based on an idea from Dave, but cleaned up a bit.
We had multiple fields for essentially the same thing.
Now bo->base.size is the original size of the BO in
arbitrary units, usually bytes.
bo->mem.num_pages is the size in number of pages in the
resource domain of bo->mem.mem_type.
v2: use the GEM object size instead of the BO size
v3: fix printks in some places
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/406831/
Chris spotted that since 16ffe73c18 ("drm/i915/pmu: Use GT parked for
estimating RC6 while asleep") we don't rely on runtime pm internals when
estimating RC6 while asleep. We can remove the ifdef code to simplify and
at the same time wake up the device less when querying RC6 if CONFIG_PM is
not compiled in.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 16ffe73c18 ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-3-tvrtko.ursulin@linux.intel.com
Chris found a CI report which points out calling intel_runtime_pm_get from
inside i915_pmu_enable hook is not allowed since it can be invoked from
hard irq context. This is something we knew but forgot, so lets fix it
once again.
We do this by syncing the internal book keeping with hardware rc6 counter
on driver load.
v2:
* Always sync on parking and fully sync on init.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: f4e9894b69 ("drm/i915/pmu: Correct the rc6 offset upon enabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-1-tvrtko.ursulin@linux.intel.com
The kernel calls these functions on CPU online and hence they must not
be marked __init.
Otherwise if the memory they occupied has been reused the system can
crash in various ways. Sachin reported it caused his LPAR to
spontaneously restart with no other output. With xmon enabled it may
drop into xmon with a dump like:
cpu 0x1: Vector: 700 (Program Check) at [c000000003c5fcb0]
pc: 00000000011e0a78
lr: 00000000011c51d4
sp: c000000003c5ff50
msr: 8000000000081001
current = 0xc000000002c12b00
paca = 0xc000000003cff280 irqmask: 0x03 irq_happened: 0x01
pid = 0, comm = swapper/1
...
[c000000003c5ff50] 0000000000087c38 (unreliable)
[c000000003c5ff70] 000000000003870c
[c000000003c5ff90] 000000000000d108
Fixes: 3b47b7549e ("powerpc/book3s64/kuap: Move KUAP related function outside radix")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Expand change log with details and xmon output]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201214080121.358567-1-aneesh.kumar@linux.ibm.com
We have no way of tracking server READ_PLUS support in pNFS for now, so
just disable it.
Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server returns more data than we have buffer space for, then
we need to truncate and exit early.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Expanding the READ_PLUS extents can cause the read buffer to overflow.
If it does, then don't error, but just exit early.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a hole extends beyond the READ_PLUS read buffer, then we want to fill
just the remaining buffer with zeros. Also ignore eof...
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The server is allowed to return a hole extent with an offset that starts
before the offset supplied in the READ_PLUS argument. Ensure that we
support that case too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we're shifting the page data to the right, and this happens to be a
sparse page array, then we may need to allocate new pages in order to
receive the data.
Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
There are a number of xdr helpers for struct xdr_buf that do not change
the structure itself. Mark those as taking const pointers for
documentation purposes.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move the setting of the xdr_stream 'nwords' field into the helpers that
reset the xdr_stream cursor.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We do want to try to grow the buffer if possible, but if that attempt
fails, we still want to move the data and truncate the XDR message.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The main use case right now for xdr_align_data() is to shift the page
data to the left, and in practice shrink the total XDR data buffer.
This patch ensures that we fix up the accounting for the buffer length
as we shift that data around.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Use the existing BITS_PER_LONG macro instead of calculating the value.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Olga K. observed that rpcrdma_marsh_req() allocates sparse pages
only when it has determined that a Reply chunk is necessary. There
are plenty of cases where no Reply chunk is needed, but the
XDRBUF_SPARSE_PAGES flag is set. The result would be a crash in
rpcrdma_inline_fixup() when it tries to copy parts of the received
Reply into a missing page.
To avoid crashing, handle sparse page allocation up front.
Until XATTR support was added, this issue did not appear often
because the only SPARSE_PAGES consumer always expected a reply large
enough to always require a Reply chunk.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
XDRBUF_SPARSE_PAGES can cause problems for the RDMA transport,
and it's easy enough to allocate enough pages for the request
up front, so do that.
Also, since we've allocated the pages anyway, use the full
page aligned length for the receive buffer. This will allow
caching of valid replies that are too large for the caller,
but that still fit in the allocated pages.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When receiving pages data, return value 'ret' when positive includes
`buf->page_base`, so we should subtract that before it is used for
changing `offset` and comparing against `want`.
This was discovered on the very rare cases where the server returned a
chunk of bytes that when added to the already received amount of bytes
for the pages happened to match the current `recv.len`, for example
on this case:
buf->page_base : 258356
actually received from socket: 1740
ret : 260096
want : 260096
In this case neither of the two 'if ... goto out' trigger, and we
continue to tail parsing.
Worth to mention that the ensuing EMSGSIZE from the continued execution of
`xs_read_xdr_buf` may be observed by an application due to 4 superfluous
bytes being added to the pages data.
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching to using iterators")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
