This reverts commit e086558ae9 ("drm/omap: dss: Remove unused
omap_dss_device operations")
This is still needed by DSI. E.g. unloading modules without this will
cause a crash.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-2-tomi.valkeinen@ti.com
Adds support for COLOR_ENCODING and COLOR_RANGE properties to
omap_plane.c and dispc.c. The supported encodings and ranges are
presets are:
For COLOR_ENCODING:
- YCbCr BT.601 (default)
- YCbCr BT.709
For COLOR_RANGE:
- YCbCr limited range
- YCbCr full range (default)
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-6-tomi.valkeinen@ti.com
Implement CTM color management property for OMAP CRTC using DSS
overlay manager's Color Phase Rotation matrix. The CPR matrix does not
exactly match the CTM property documentation. On DSS the CPR matrix is
applied after gamma table look up. However, it seems stupid to add a
custom property just for that.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-4-tomi.valkeinen@ti.com
omapdrm supports gamma via GAMMA_LUT property. However, the HW we have
is:
gamma -> ctm -> out
instead of what the model DRM framework uses:
ctm -> gamma -> out
As the following patches add CTM support for omapdrm, lets first fix the
gamma.
This patch changes the property from GAMMA_LUT to DEGAMMA_LUT, and thus
we will have:
degamma -> ctm -> out
and the legacy ioctl will continue working as before.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-3-tomi.valkeinen@ti.com
The DRM core handles legacy gamma-set ioctl by setting GAMMA_LUT and
clearing CTM and DEGAMMA_LUT.
This works fine on HW where we have either:
degamma -> ctm -> gamma -> out
or
ctm -> gamma -> out
However, if the HW has gamma table before ctm, the atomic property
should be DEGAMMA_LUT, and thus we have:
degamma -> ctm -> out
This is fine for userspace which sets gamma table using the properties,
as the userspace can check for the existence of gamma & degamma, but the
legacy gamma-set ioctl does not work.
Change the DRM core to use DEGAMMA_LUT instead of GAMMA_LUT when the
latter is unavailable.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-3-tomi.valkeinen@ti.com
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
When building with W=1, GCC complains that we haven't defined prototypes
for a number of non-static functions in entry-common.c:
| arch/arm64/kernel/entry-common.c:203:25: warning: no previous prototype for 'el1_sync_handler' [-Wmissing-prototypes]
| 203 | asmlinkage void noinstr el1_sync_handler(struct pt_regs *regs)
| | ^~~~~~~~~~~~~~~~
| arch/arm64/kernel/entry-common.c:377:25: warning: no previous prototype for 'el0_sync_handler' [-Wmissing-prototypes]
| 377 | asmlinkage void noinstr el0_sync_handler(struct pt_regs *regs)
| | ^~~~~~~~~~~~~~~~
| arch/arm64/kernel/entry-common.c:447:25: warning: no previous prototype for 'el0_sync_compat_handler' [-Wmissing-prototypes]
| 447 | asmlinkage void noinstr el0_sync_compat_handler(struct pt_regs *regs)
| | ^~~~~~~~~~~~~~~~~~~~~~~
... and so automated build systems using W=1 end up sending a number of
emails, despite this not being a real problem as the only callers are in
entry.S where prototypes cannot matter.
For similar cases in entry-common.c we added prototypes to
asm/exception.h, so let's do the same thing here for consistency.
Note that there are a number of other warnings printed with W=1, both
under arch/arm64 and in core code, and this patch only addresses the
cases in entry-common.c. Automated build systems typically filter these
warnings such that they're only reported when changes are made nearby,
so we don't need to solve them all at once.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201214113353.44417-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The previous call to update_freq_counters_refs() has already updated the
per-cpu variables, don't overwrite them with the same value again.
Fixes: 4b9cf23c17 ("arm64: wrap and generalise counter read functions")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/7a171f710cdc0f808a2bfbd7db839c0d265527e7.1607579234.git.viresh.kumar@linaro.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This makes it easy to disable building with -Werror:
$ make defconfig
$ grep WERROR .config
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
$ make disable-werror.config
GEN Makefile
Using .config as base
Merging arch/powerpc/configs/disable-werror.config
Value of CONFIG_PPC_DISABLE_WERROR is redefined by fragment arch/powerpc/configs/disable-werror.config:
Previous value: # CONFIG_PPC_DISABLE_WERROR is not set
New value: CONFIG_PPC_DISABLE_WERROR=y
...
$ grep WERROR .config
CONFIG_PPC_DISABLE_WERROR=y
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201023040002.3313371-1-mpe@ellerman.id.au
Sometimes we can't read an error log from OPAL, and we print an error
message accordingly. But the OPAL userspace tools seem to like retrying a
lot, in which case we flood the kernel log with a lot of messages.
Change pr_err() to pr_err_ratelimited() to help with this.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201211021140.28402-1-ajd@linux.ibm.com
When attempting to remove by index a set of LMBs a lot of messages are
displayed on the console, even when everything goes fine:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000002d
Offlined Pages 4096
pseries-hotplug-mem: Memory at 2d0000000 was hot-removed
The 2 messages prefixed by "pseries-hotplug-mem" are not really
helpful for the end user, they should be debug outputs.
In case of error, because some of the LMB's pages couldn't be
offlined, the following is displayed on the console:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000003e
pseries-hotplug-mem: Failed to hot-remove memory at 3e0000000
dlpar: Could not handle DLPAR request "memory remove index 0x8000003e"
Again, the 2 messages prefixed by "pseries-hotplug-mem" are useless,
and the generic DLPAR prefixed message should be enough.
These 2 first changes are mainly triggered by the changes introduced
in drmgr:
https://groups.google.com/g/powerpc-utils-devel/c/Y6ef4NB3EzM/m/9cu5JHRxAQAJ
Also, when adding a bunch of LMBs, a message is displayed in the console per LMB
like these ones:
pseries-hotplug-mem: Memory at 7e0000000 (drc index 8000007e) was hot-added
pseries-hotplug-mem: Memory at 7f0000000 (drc index 8000007f) was hot-added
pseries-hotplug-mem: Memory at 800000000 (drc index 80000080) was hot-added
pseries-hotplug-mem: Memory at 810000000 (drc index 80000081) was hot-added
When adding 1TB of memory and LMB size is 256MB, this leads to 4096
messages to be displayed on the console. These messages are not really
helpful for the end user, so moving them to the DEBUG level.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Tweak change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201211145954.90143-1-ldufour@linux.ibm.com
The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix the ps3stor_setup() function accordingly.
Fixes: 80071802cb ("[POWERPC] PS3: Storage Driver Core")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201213182622.23047-1-vincent.stehle@laposte.net
Threshold Event Counter Multiplier (TECM) is part of Monitor Mode
Control Register A (MMCRA). This field along with Threshold Event
Counter Exponent (TECE) is used to get threshould counter value.
In Power10, this is a 8bit field, so patch fixes the
current code to modify the MMCRA[TECM] extraction macro to
handle this change. ISA v3.1 says this is a 7 bit field but
POWER10 it's actually 8 bits which will hopefully be fixed
in ISA v3.1 update.
Fixes: 170a315f41 ("powerpc/perf: Support to export MMCRA[TEC*] field to userspace")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1608022578-1532-1-git-send-email-atrajeev@linux.vnet.ibm.com
According to ISAv3.1 and ISAv3.0b, the msgsndp is described to split
RB in:
msgtype <- (RB) 32:36
payload <- (RB) 37:63
t <- (RB) 57:63
The current way of getting 'msgtype', and 't' is missing their MSB:
msgtype: ((arg >> 27) & 0xf) : Gets (RB) 33:36, missing bit 32
t: (arg &= 0x3f) : Gets (RB) 58:63, missing bit 57
Fixes this by applying the correct mask.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208215707.31149-1-leobras.c@gmail.com
Fix the following coccinelle warnings:
./arch/powerpc/kvm/book3s_xics.c:476:3-15: WARNING: Assignment of 0/1 to bool variable
./arch/powerpc/kvm/book3s_xics.c:504:3-15: WARNING: Assignment of 0/1 to bool variable
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1604730382-5810-1-git-send-email-kaixuxia@tencent.com
- fix the build breakage on IA64 caused by recent capsule loader changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM
-----BEGIN PGP SIGNATURE-----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=ZTHO
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull followup fixes for EFI from Ard Biesheuvel:
- fix the build breakage on IA64 caused by recent capsule loader changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM
Link: https://lore.kernel.org/r/20201215080144.17077-1-ardb@kernel.org
Now that the semaphore is gone, our atomic_commit implementation is
basically drm_atomic_helper_commit with a somewhat custom commit_tail,
the main difference being that we're using wait_for_flip_done instead of
wait_for_vblanks used in the drm_atomic_helper_commit_tail helper.
Let's switch to using drm_atomic_helper_commit.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-8-maxime@cerno.tech
The HVS state now has both unassigned_channels that reflects the
channels that are not used in the associated state, and the in_use
boolean for each channel that says whether or not a particular channel
is in use.
Both express pretty much the same thing, and we need the in_use variable
to properly track the commits, so let's get rid of unassigned_channels.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-6-maxime@cerno.tech
If we're having two subsequent, non-blocking, commits on two different
CRTCs that share no resources, there's no guarantee on the order of
execution of both commits.
However, the second one will consider the first one as the old state,
and will be in charge of freeing it once that second commit is done.
If the first commit happens after that second commit, it might access
some resources related to its state that has been freed, resulting in a
use-after-free bug.
The standard DRM objects are protected against this, but our HVS private
state isn't so let's make sure we wait for all the previous FIFO users
to finish their commit before going with our own.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-5-maxime@cerno.tech
Private objects storing a state shared across all CRTCs need to be
carefully handled to avoid a use-after-free issue.
The proper way to do this to track all the commits using that shared
state and wait for the previous commits to be done before going on with
the current one to avoid the reordering of commits that could occur.
However, this commit setup needs to be done after
drm_atomic_helper_setup_commit(), because before the CRTC commit
structure hasn't been allocated before, and before the workqueue is
scheduled, because we would be potentially reordered already otherwise.
That means that drivers currently have to roll their own
drm_atomic_helper_commit() function, even though it would be identical
if not for the commit setup.
Let's introduce a hook to do so that would be called as part of
drm_atomic_helper_commit, allowing us to reuse the atomic helpers.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-2-maxime@cerno.tech
The kernel test robot measured a -1.6% performance regression on
will-it-scale/sched_yield due to commit:
2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Even though we were careful to replace a single load with another
single load from the same cacheline.
Restore finish_lock_switch() to the exact state before the offending
patch and solve the problem differently.
Fixes: 2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201210161408.GX3021@hirez.programming.kicks-ass.net
An SEV-ES guest is started by invoking a new SEV initialization ioctl,
KVM_SEV_ES_INIT. This identifies the guest as an SEV-ES guest, which is
used to drive the appropriate ASID allocation, VMSA encryption, etc.
Before being able to run an SEV-ES vCPU, the vCPU VMSA must be encrypted
and measured. This is done using the LAUNCH_UPDATE_VMSA command after all
calls to LAUNCH_UPDATE_DATA have been performed, but before LAUNCH_MEASURE
has been performed. In order to establish the encrypted VMSA, the current
(traditional) VMSA and the GPRs are synced to the page that will hold the
encrypted VMSA and then LAUNCH_UPDATE_VMSA is invoked. The vCPU is then
marked as having protected guest state.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e9643245adb809caf3a87c09997926d2f3d6ff41.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The run sequence is different for an SEV-ES guest compared to a legacy or
even an SEV guest. The guest vCPU register state of an SEV-ES guest will
be restored on VMRUN and saved on VMEXIT. There is no need to restore the
guest registers directly and through VMLOAD before VMRUN and no need to
save the guest registers directly and through VMSAVE on VMEXIT.
Update the svm_vcpu_run() function to skip register state saving and
restoring and provide an alternative function for running an SEV-ES guest
in vmenter.S
Additionally, certain host state is restored across an SEV-ES VMRUN. As
a result certain register states are not required to be restored upon
VMEXIT (e.g. FS, GS, etc.), so only do that if the guest is not an SEV-ES
guest.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <fb1c66d32f2194e171b95fc1a8affd6d326e10c1.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES vCPU requires additional VMCB vCPU load/put requirements. SEV-ES
hardware will restore certain registers on VMEXIT, but not save them on
VMRUN (see Table B-3 and Table B-4 of the AMD64 APM Volume 2), so make the
following changes:
General vCPU load changes:
- During vCPU loading, perform a VMSAVE to the per-CPU SVM save area and
save the current values of XCR0, XSS and PKRU to the per-CPU SVM save
area as these registers will be restored on VMEXIT.
General vCPU put changes:
- Do not attempt to restore registers that SEV-ES hardware has already
restored on VMEXIT.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <019390e9cb5e93cd73014fa5a040c17d42588733.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An SEV-ES vCPU requires additional VMCB initialization requirements for
vCPU creation and vCPU load/put requirements. This includes:
General VMCB initialization changes:
- Set a VMCB control bit to enable SEV-ES support on the vCPU.
- Set the VMCB encrypted VM save area address.
- CRx registers are part of the encrypted register state and cannot be
updated. Remove the CRx register read and write intercepts and replace
them with CRx register write traps to track the CRx register values.
- Certain MSR values are part of the encrypted register state and cannot
be updated. Remove certain MSR intercepts (EFER, CR_PAT, etc.).
- Remove the #GP intercept (no support for "enable_vmware_backdoor").
- Remove the XSETBV intercept since the hypervisor cannot modify XCR0.
General vCPU creation changes:
- Set the initial GHCB gpa value as per the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <3a8aef366416eddd5556dfa3fdc212aafa1ad0a2.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV and SEV-ES guests each have dedicated ASID ranges. Update the ASID
allocation routine to return an ASID in the respective range.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <d7aed505e31e3954268b2015bb60a1486269c780.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SVM host save area is used to restore some host state on VMEXIT of an
SEV-ES guest. After allocating the save area, clear it and add the
encryption mask to the SVM host save area physical address that is
programmed into the VM_HSAVE_PA MSR.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b77aa28af6d7f1a0cb545959e08d6dc75e0c3cba.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB specification defines how NMIs are to be handled for an SEV-ES
guest. To detect the completion of an NMI the hypervisor must not
intercept the IRET instruction (because a #VC while running the NMI will
issue an IRET) and, instead, must receive an NMI Complete exit event from
the guest.
Update the KVM support for detecting the completion of NMIs in the guest
to follow the GHCB specification. When an SEV-ES guest is active, the
IRET instruction will no longer be intercepted. Now, when the NMI Complete
exit event is received, the iret_interception() function will be called
to simulate the completion of the NMI.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <5ea3dd69b8d4396cefdc9048ebc1ab7caa70a847.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest FPU state is automatically restored on VMRUN and saved on VMEXIT
by the hardware, so there is no reason to do this in KVM. Eliminate the
allocation of the guest_fpu save area and key off that to skip operations
related to the guest FPU state.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <173e429b4d0d962c6a443c4553ffdaf31b7665a4.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-ES guests do not currently support SMM. Update the has_emulated_msr()
kvm_x86_ops function to take a struct kvm parameter so that the capability
can be reported at a VM level.
Since this op is also called during KVM initialization and before a struct
kvm instance is available, comments will be added to each implementation
of has_emulated_msr() to indicate the kvm parameter can be null.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <75de5138e33b945d2fb17f81ae507bda381808e3.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since many of the registers used by the SEV-ES are encrypted and cannot
be read or written, adjust the __get_sregs() / __set_sregs() to take into
account whether the VMSA/guest state is encrypted.
For __get_sregs(), return the actual value that is in use by the guest
for all registers being tracked using the write trap support.
For __set_sregs(), skip setting of all guest registers values.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <23051868db76400a9b07a2020525483a1e62dbcf.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES guests, the interception of control register write access
is not recommended. Control register interception occurs prior to the
control register being modified and the hypervisor is unable to modify
the control register itself because the register is located in the
encrypted register state.
SEV-ES guests introduce new control register write traps. These traps
provide intercept support of a control register write after the control
register has been modified. The new control register value is provided in
the VMCB EXITINFO1 field, allowing the hypervisor to track the setting
of the guest control registers.
Add support to track the value of the guest CR8 register using the control
register write trap so that the hypervisor understands the guest operating
mode.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <5a01033f4c8b3106ca9374b7cadf8e33da852df1.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES guests, the interception of control register write access
is not recommended. Control register interception occurs prior to the
control register being modified and the hypervisor is unable to modify
the control register itself because the register is located in the
encrypted register state.
SEV-ES guests introduce new control register write traps. These traps
provide intercept support of a control register write after the control
register has been modified. The new control register value is provided in
the VMCB EXITINFO1 field, allowing the hypervisor to track the setting
of the guest control registers.
Add support to track the value of the guest CR4 register using the control
register write trap so that the hypervisor understands the guest operating
mode.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c3880bf2db8693aa26f648528fbc6e967ab46e25.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES guests, the interception of control register write access
is not recommended. Control register interception occurs prior to the
control register being modified and the hypervisor is unable to modify
the control register itself because the register is located in the
encrypted register state.
SEV-ES support introduces new control register write traps. These traps
provide intercept support of a control register write after the control
register has been modified. The new control register value is provided in
the VMCB EXITINFO1 field, allowing the hypervisor to track the setting
of the guest control registers.
Add support to track the value of the guest CR0 register using the control
register write trap so that the hypervisor understands the guest operating
mode.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <182c9baf99df7e40ad9617ff90b84542705ef0d7.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For SEV-ES guests, the interception of EFER write access is not
recommended. EFER interception occurs prior to EFER being modified and
the hypervisor is unable to modify EFER itself because the register is
located in the encrypted register state.
SEV-ES support introduces a new EFER write trap. This trap provides
intercept support of an EFER write after it has been modified. The new
EFER value is provided in the VMCB EXITINFO1 field, allowing the
hypervisor to track the setting of the guest EFER.
Add support to track the value of the guest EFER value using the EFER
write trap so that the hypervisor understands the guest operating mode.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <8993149352a3a87cd0625b3b61bfd31ab28977e1.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For an SEV-ES guest, string-based port IO is performed to a shared
(un-encrypted) page so that both the hypervisor and guest can read or
write to it and each see the contents.
For string-based port IO operations, invoke SEV-ES specific routines that
can complete the operation using common KVM port IO support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <9d61daf0ffda496703717218f415cdc8fd487100.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For an SEV-ES guest, MMIO is performed to a shared (un-encrypted) page
so that both the hypervisor and guest can read or write to it and each
see the contents.
The GHCB specification provides software-defined VMGEXIT exit codes to
indicate a request for an MMIO read or an MMIO write. Add support to
recognize the MMIO requests and invoke SEV-ES specific routines that
can complete the MMIO operation. These routines use common KVM support
to complete the MMIO operation.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <af8de55127d5bcc3253d9b6084a0144c12307d4d.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add trace events for entry to and exit from VMGEXIT MSR protocol
processing. The vCPU will be common for the trace events. The MSR
protocol processing is guided by the GHCB GPA in the VMCB, so the GHCB
GPA will represent the input and output values for the entry and exit
events, respectively. Additionally, the exit event will contain the
return code for the event.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c5b3b440c3e0db43ff2fc02813faa94fa54896b0.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add trace events for entry to and exit from VMGEXIT processing. The vCPU
id and the exit reason will be common for the trace events. The exit info
fields will represent the input and output values for the entry and exit
events, respectively.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <25357dca49a38372e8f483753fb0c1c2a70a6898.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB specification defines a GHCB MSR protocol using the lower
12-bits of the GHCB MSR (in the hypervisor this corresponds to the
GHCB GPA field in the VMCB).
Function 0x100 is a request for termination of the guest. The guest has
encountered some situation for which it has requested to be terminated.
The GHCB MSR value contains the reason for the request.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f3a1f7850c75b6ea4101e15bbb4a3af1a203f1dc.1607620209.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
