If the rmnet_ipa0 network device has not been opened at the time
we remove or shut down the IPA driver, its underlying TX and RX
GSI channels will not have been started, and they will still be
in ALLOCATED state.
The RESET command on a channel is meant to return a channel to
ALLOCATED state after it's been stopped. But if it was never
started, its state will still be ALLOCATED, the RESET command
is not required.
Quietly skip doing the reset without printing an error message if a
channel is already in ALLOCATED state when we request it be reset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a GSI command is used to change the state of a channel or event
ring we check the state before and after the command to ensure it is
as expected. If not, we print an error message, but it does not
include the channel or event ring id, and it easily can. Add the
channel or event ring id to these error messages.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder says:
====================
net: ipa: platform-specific clock and interconnect rates
This series changes the way the IPA core clock rate and the
bandwidth parameters for interconnects are specified. Previously
these were specified with hard-wired constants, with the same values
used for the SDM845 and SC7180 platforms. Now these parameters are
recorded in platform-specific configuration data.
For the SC7180 this means we use an all-new core clock rate and
interconnect parameters.
Additionally, while developing this I learned that the average
bandwidth setting for two of the interconnects is ignored (on both
platforms). Zero is now used explicitly as that unused bandwidth
value. This means the SDM845 bandwidth settings are also changed
by this series.
====================
Link: https://lore.kernel.org/r/20201119224041.16066-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stop assuming a fixed IPA core clock rate and interconnect
bandwidths. Use the configuration data defined for these
things instead. Get rid of the previously-used constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Populate the core clock rate and interconnect average and peak
bandwidth data for SDM845 and SC7180 in their configuration data
files. At this point we still don't *use* this data.
Note that SC7180 actually defines a new core clock rate (100 MHz
instead of 75 MHz) and new interconnect bandwidth values. They
will be activated in the next commit, which uses the configured
values rather than the fixed constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a new type of configuration data, used to initialize the
IPA core clock and interconnects. This is the first of three
patches, and defines the data types and interface but doesn't
yet use them.
Switch the return value if there is no matching configuration data
to ENODEV instead of ENOTSUPP (to avoid using the nonstandard errno).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mdio_bus may have dependencies from GPIO controller and so got
deferred. Now it will print error message every time -EPROBE_DEFER is
returned which from:
__mdiobus_register()
|-devm_gpiod_get_optional()
without actually identifying error code.
"mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO"
Hence, suppress error message for devm_gpiod_get_optional() returning
-EPROBE_DEFER case by using dev_err_probe().
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201119203446.20857-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some chip versions have a hw bug resulting in lost door bell rings.
To work around this the doorbell is also rung whenever we still have
tx descriptors in flight after having cleaned up tx descriptors.
These PCI(e) writes come at a cost, therefore let's reduce the number
of extra doorbell rings.
If skb is NULL then this means:
- last cleaned-up descriptor belongs to a skb with at least one fragment
and last fragment isn't marked as sent yet
- hw is in progress sending the skb, therefore no extra doorbell ring
is needed for this skb
- once last fragment is marked as transmitted hw will trigger
a tx done interrupt and we come here again (with skb != NULL)
and ring the doorbell if needed
Therefore skip the workaround doorbell ring if skb is NULL.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/0a15a83c-aecf-ab51-8071-b29d9dcd529a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Duyck says:
====================
tcp: Address issues with ECT0 not being set in DCTCP packets
This patch set is meant to address issues seen with SYN/ACK packets not
containing the ECT0 bit when DCTCP is configured as the congestion control
algorithm for a TCP socket.
A simple test using "tcpdump" and "test_progs -t bpf_tcp_ca" makes the
issue obvious. Looking at the packets will result in the SYN/ACK packet
with an ECT0 bit that does not match the other packets for the flow when
the congestion control agorithm is switch from the default. So for example
going from non-DCTCP to a DCTCP congestion control algorithm we will see
the SYN/ACK IPV6 header will not have ECT0 set while the other packets in
the flow will. Likewise if we switch from a default of DCTCP to cubic we
will see the ECT0 bit set in the SYN/ACK while the other packets in the
flow will not.
====================
Link: https://lore.kernel.org/r/160582070138.66684.11785214534154816097.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When setting congestion control via a BPF program it is seen that the
SYN/ACK for packets within a given flow will not include the ECT0 flag. A
bit of simple printk debugging shows that when this is configured without
BPF we will see the value INET_ECN_xmit value initialized in
tcp_assign_congestion_control however when we configure this via BPF the
socket is in the closed state and as such it isn't configured, and I do not
see it being initialized when we transition the socket into the listen
state. The result of this is that the ECT0 bit is configured based on
whatever the default state is for the socket.
Any easy way to reproduce this is to monitor the following with tcpdump:
tools/testing/selftests/bpf/test_progs -t bpf_tcp_ca
Without this patch the SYN/ACK will follow whatever the default is. If dctcp
all SYN/ACK packets will have the ECT0 bit set, and if it is not then ECT0
will be cleared on all SYN/ACK packets. With this patch applied the SYN/ACK
bit matches the value seen on the other packets in the given stream.
Fixes: 91b5b21c7c ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An issue was recently found where DCTCP SYN/ACK packets did not have the
ECT bit set in the L3 header. A bit of code review found that the recent
change referenced below had gone though and added a mask that prevented the
ECN bits from being populated in the L3 header.
This patch addresses that by rolling back the mask so that it is only
applied to the flags coming from the incoming TCP request instead of
applying it to the socket tos/tclass field. Doing this the ECT bits were
restored in the SYN/ACK packets in my testing.
One thing that is not addressed by this patch set is the fact that
tcp_reflect_tos appears to be incompatible with ECN based congestion
avoidance algorithms. At a minimum the feature should likely be documented
which it currently isn't.
Fixes: ac8f1710c1 ("tcp: reflect tos value received in SYN to the socket")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RISCV_TIMER/CLINT_TIMER is required for RISC-V system, and it
provides sched_clock, which allow us to enable IRQ_TIME_ACCOUNTING.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
riscv has selected HAVE_DMA_CONTIGUOUS, but doesn't call
dma_contiguous_reserve(). This calls dma_contiguous_reserve(), which
enables CMA.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fixes for two fairly obscure but annoying when triggered races in
iSCSI.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX7gmiiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcJeAP4v9I6j
fh/0E3tU+Hb8ZerNoD8p2q7vdxeKkihXWw5/EwEA2SoFW6VNTrJdhUq1+hJ1QWOR
Awrex3uy1m11ETLgIcM=
=A1lM
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes for two fairly obscure but annoying when triggered races in
iSCSI"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Fix cmd abort fabric stop race
scsi: libiscsi: Fix NOP race condition
Mat Martineau says:
====================
mptcp: More miscellaneous MPTCP fixes
Here's another batch of fixup and enhancement patches that we have
collected in the MPTCP tree.
Patch 1 removes an unnecessary flag and related code.
Patch 2 fixes a bug encountered when closing fallback sockets.
Patches 3 and 4 choose a better transmit subflow, with a self test.
Patch 5 adjusts tracking of unaccepted subflows
Patches 6-8 improve handling of long ADD_ADDR options, with a test.
Patch 9 more reliably tracks the MPTCP-level window shared with peers.
Patch 10 sends MPTCP-level acknowledgements more aggressively, so the
peer can send more data without extra delay.
====================
Link: https://lore.kernel.org/r/20201119194603.103158-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Send timely MPTCP-level ack is somewhat difficult when
the insertion into the msk receive level is performed
by the worker.
It needs TCP-level dup-ack to notify the MPTCP-level
ack_seq increase, as both the TCP-level ack seq and the
rcv window are unchanged.
We can actually avoid processing incoming data with the
worker, and let the subflow or recevmsg() send ack as needed.
When recvmsg() moves the skbs inside the msk receive queue,
the msk space is still unchanged, so tcp_cleanup_rbuf() could
end-up skipping TCP-level ack generation. Anyway, when
__mptcp_move_skbs() is invoked, a known amount of bytes is
going to be consumed soon: we update rcv wnd computation taking
them in account.
Additionally we need to explicitly trigger tcp_cleanup_rbuf()
when recvmsg() consumes a significant amount of the receive buffer.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
OoO handling attempts to detect when packet is out-of-window by testing
current ack sequence and remaining space vs. sequence number.
This doesn't work reliably. Store the highest allowed sequence number
that we've announced and use it to detect oow packets.
Do this when mptcp options get written to the packet (wire format).
For this to work we need to move the write_options call until after
stack selected a new tcp window.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets.
It will not fit when other MPTCP suboptions are included in this packet,
e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only
ADD_ADDR suboption, no other MPTCP suboptions.
In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR.
If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call
mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet.
In mptcp_established_options_add_addr, we check whether this is a pure
ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions
in this packet, only put ADD_ADDR suboption in it.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changed the 'add_addr_signal' type from bool to char, so that
we could encode the addr type there.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will simplify all operation dealing with subflows
before accept time (e.g. data fin processing, add_addr).
The join list is already flushed by mptcp_stream_accept()
before returning the newly created msk to the user space.
This also fixes an potential bug present into the old code:
conn_list was manipulated without helding the msk lock
in mptcp_stream_accept().
Tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case where a link fails with multiple subflows.
The expectation is that MPTCP will transmit any data that
could not be delivered via the failed link on another subflow.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case a subflow path is blocked, MPTCP-level retransmit may not take
place anymore because such subflow is likely to have unacked data left
in its write queue.
Ignore subflows that have experienced loss and test next candidate.
Fixes: 3b1d6210a9 ("mptcp: implement and use MPTCP-level retransmission")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to cope with some more state transition for
fallback sockets, or could still end-up moving to TCP_CLOSE
too early and avoid spooling some pending data
Fixes: e16163b6e2 ("mptcp: refactor shutdown and close")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only mptcp_close() can actually cancel the workqueue,
no need to add and use this flag.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a device ID is written to /sys/bus/pci/drivers/.../new_id, we
previously only checked the driver's static ID table for duplicates.
Writing the same ID several times added it to the dynamic IDs list several
times.
This doesn't cause user-visible broken behavior, but remove_id_store() only
removes one of the duplicate IDs, so if we add an ID several times, we
would have to remove it the same number of times before it's completely
gone.
Fix it by calling pci_match_device(), which checks both dynamic and static
IDs to avoid inserting duplicate IDs in dynamic IDs list.
After fix, attempts to add an ID more than once cause an error:
# echo "1af4 1041" > /sys/bus/pci/drivers/vfio-pci/new_id
# echo "1af4 1041" > /sys/bus/pci/drivers/vfio-pci/new_id
bash: echo: write error: File exists
Link: https://lore.kernel.org/r/20201117054409.3428-3-zhenzhong.duan@gmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Explicitly enable the FSL_XGMAC_MDIO Kconfig option in order to have
MDIO access to internal and external PHYs.
Fixes: 7194792308 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119145106.712761-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
mlxsw: Add support for nexthop objects
This patch set adds support for nexthop objects in mlxsw. Nexthop
objects are treated as another front-end for programming nexthops, in
addition to the existing IPv4 and IPv6 front-ends.
Patch #1 registers a listener to the nexthop notification chain and
parses the nexthop information into the existing mlxsw data structures
that are already used by the IPv4 and IPv6 front-ends. Blackhole
nexthops are currently rejected. Support will be added in a follow-up
patch set.
Patch #2 extends mlxsw to resolve its internal nexthop objects from the
nexthop identifier encoded in the FIB info of the notified routes.
Patch #3 finally removes the limitation of rejecting routes that use
nexthop objects.
Patch #4 adds a selftest.
Patches #5-#8 add generic forwarding selftests that can be used with
veth pairs or physical loopbacks.
====================
Link: https://lore.kernel.org/r/20201119130848.407918-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a nexthop objects version of gre_multipath.sh. Unlike the original
test, it also tests IPv6 overlay which is not possible with the legacy
nexthop implementation. See commit 9a2ad36238 ("selftests: forwarding:
gre_multipath: Drop IPv6 tests") for more info.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to router_multipath.sh and its nexthop objects
version router_mpath_nh.sh, create a nexthop objects version of
router.sh.
It reuses the same topology, but uses device-only nexthop objects
instead of legacy ones.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to IPv4 multipath tests with IPv4 nexthops, also test IPv4
multipath with nexthops that use IPv6 link-local addresses.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
routing_nh_obj() is used to configure the nexthop objects employed by
the test, but it is called twice resulting in "RTNETLINK answers: File
exists" messages.
Remove the first call, so that the function is only called after
setup_wait(), when all the interfaces are up and ready.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that unsupported nexthop objects are rejected and that offload
indication is correctly set on: nexthop objects, nexthop group objects
and routes associated these objects.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the driver supports nexthop objects, the check is no longer
necessary. Remove it.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the FIB info (i.e, 'struct fib_info', 'struct fib6_info') uses a
nexthop object, then use the object's identifier to resolve the nexthop
group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Register a listener to the nexthop notification chain and parse notified
nexthop objects into the existing mlxsw nexthop data structures.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If dsa_switch_ops::port_txtstamp() returns false, clone will be freed
immediately. Shouldn't store a pointer to freed memory.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201119110906.25558-1-ceggers@arri.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of 5.10 OpenRISC allyesconfig builds fail with the following error.
$ make ARCH=openrisc CROSS_COMPILE=or1k-elf- block/blk-iocost.o
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
CC block/blk-iocost.o
block/blk-iocost.c:183:10: fatal error: asm/local64.h: No such file or directory
183 | #include <asm/local64.h>
| ^~~~~~~~~~~~~~~
compilation terminated.
The new include of local64.h was added in commit 5e124f7432
("blk-iocost: use local[64]_t for percpu stat") by Tejun.
Adding the generic version of local64.h to OpenRISC fixes the build
issue.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Move pci_match_device() and its dependencies (pci_match_id() and
pci_device_id_any) ahead of new_id_store().
This is preparation work for calling pci_match_device() in new_id_store().
No functional changes.
[bhelgaas: update function comments]
Link: https://lore.kernel.org/r/20201117054409.3428-2-zhenzhong.duan@gmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A broken schema file now causes make to exit and 'make -k' no longer works
now that dt-doc-validate is called from a single make rule.
As yamllint is optional, we shouldn't stop on yamllint errors either. Also,
it seems some old versions of yamllint don't work.
Signed-off-by: Rob Herring <robh@kernel.org>
Antonio Cardace says:
====================
netdevsim: add ethtool coalesce and ring settings
Output of ethtool-ring.sh and ethtool-coalesce.sh selftests:
# ./ethtool-ring.sh
PASSED all 4 checks
# ./ethtool-coalesce.sh
PASSED all 22 checks
# ./ethtool-pause.sh
PASSED all 7 checks
====================
Link: https://lore.kernel.org/r/20201118204522.5660-1-acardace@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add scripts to test ring and coalesce settings
of netdevsim.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out by Michal Kubecek, getting the name
with the previous approach was racy, it's better
and easier to get the name of the device with this
patch's approach.
Essentialy the function doesn't need to exist
anymore as it's a simple 'ls' command.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out some useful functions so that they can be reused
by other ethtool-netdevsim scripts.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ethtool ring and coalesce settings support for testing.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will help the refactoring in the next commit
when coalesce and ring settings are added.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bitmask represents all existing coalesce parameters.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently ipoib choose cq completion vector based on port number, when HCA
only have one port, all the interface recv queue completion are bind to cq
completion vector 0.
To better distribute the load, use same method as __ib_alloc_cq_any to
choose completion vector, with the change, each interface now use
different completion vectors.
Link: https://lore.kernel.org/r/20201013074342.15867-1-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix build of net/core/stream.o when CONFIG_INET is not enabled.
Fixes these build errors (sample):
ld: net/core/stream.o: in function `sk_stream_write_space':
(.text+0x27e): undefined reference to `tcp_stream_memory_free'
ld: (.text+0x29c): undefined reference to `tcp_stream_memory_free'
ld: (.text+0x2ab): undefined reference to `tcp_stream_memory_free'
ld: net/core/stream.o: in function `sk_stream_wait_memory':
(.text+0x5a1): undefined reference to `tcp_stream_memory_free'
ld: (.text+0x5bf): undefined reference to `tcp_stream_memory_free'
Fixes: 1c5f2ced13 ("tcp: avoid indirect call to tcp_stream_memory_free()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201118194438.674-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
