the microphone is attached to external codec(adau7002)
instead of rt5682.We need to always use 32 bit format on sc7180
to meet the clock requirement of adau7002:
The ADAU7002 requires a BCLK rate
that is a minimum of 64× the LRCLK sample rate
Signed-off-by: xuyuqing <xuyuqing@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20201118005858.123013-2-xuyuqing@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds support for the Guitar Hero Live PS3 and Wii U dongles.
These dongles require a "magic" USB control message [1] to be sent
approximately every 10 seconds otherwise the dongle will not report
events where the strumbar is hit while a fret is being held.
Also, inspired by a patch sent on linux-input by Sanjay Govind [2], the
accelerometer is mapped to ABS_RY for tilt.
Interestingly, the Wii U and PS3 dongles share the same VID and PID.
[1] https://github.com/ghlre/GHLtarUtility/
[2] https://marc.info/?l=linux-input&m=157242835928542&w=2
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config
instead of having them defined in SPI_DW_BT1. If the kernel doesn't have
the MULTIPLEXER and MUX_MMIO configs manually enabled and the
SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will
always fail to be probed by the driver. Fix that and the error reported by
the test robot:
>> ld.lld: error: undefined symbol: devm_mux_control_get
>>> referenced by spi-dw-bt1.c
>>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a
by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1
config.
Link: https://lore.kernel.org/lkml/202011161745.uYRlekse-lkp@intel.com/
Link: https://lore.kernel.org/linux-spi/20201116040721.8001-1-rdunlap@infradead.org/
Fixes: abf0090753 ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201127144612.4204-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the hidraw module can only read and write feature HID reports on
demand, via dedicated ioctls. Input reports are read from the device through
the read() interface, while output reports are written through the write
interface().
This is insufficient; it is desirable in many situations to be able to read and
write input and output reports through the control interface to cover
additional scenarios:
- Reading an input report by its report ID, to get initial state
- Writing an input report, to set initial input state in the device
- Reading an output report by its report ID, to obtain current state
- Writing an output report by its report ID, out of band
This patch adds these missing ioctl requests to read and write the remaining
HID report types. Note that not all HID backends will neccesarily support this
(e.g. while the USB link layer supports setting Input reports, others may not).
Also included are documentation and example updates. The current hidraw
documentation states that feature reports read from the device does *not*
include the report ID, however this is not the case and the returned report
will have its report ID prepended by conforming HID devices, as the report data
sent from the device over the control endpoint must be indentical in format to
those sent over the regular transport.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the maximum HID report size which can be buffered by the kernel is
8KB. This is sufficient for the vast majority of HID devices on the market, as
most HID reports are fairly small.
However, some unusual devices such as the Elgate Stream Deck exist which use a
report size slightly over 8KB for the image data that is sent to the device.
Reports these large cannot be buffered by the regular HID subsystem currently,
thus the only way to use such device is to bypass the HID subsystem entirely.
This increases the maximum HID report size to 16KB, which should cover all
sanely designed HID devices.
Signed-off-by: Dean Camera <dean@fourwalledcubicle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
kvm_cpu_accept_dm_intr and kvm_vcpu_ready_for_interrupt_injection are
a hodge-podge of conditions, hacked together to get something that
more or less works. But what is actually needed is much simpler;
in both cases the fundamental question is, do we have a place to stash
an interrupt if userspace does KVM_INTERRUPT?
In userspace irqchip mode, that is !vcpu->arch.interrupt.injected.
Currently kvm_event_needs_reinjection(vcpu) covers it, but it is
unnecessarily restrictive.
In split irqchip mode it's a bit more complicated, we need to check
kvm_apic_accept_pic_intr(vcpu) (the IRQ window exit is basically an INTACK
cycle and thus requires ExtINTs not to be masked) as well as
!pending_userspace_extint(vcpu). However, there is no need to
check kvm_event_needs_reinjection(vcpu), since split irqchip keeps
pending ExtINT state separate from event injection state, and checking
kvm_cpu_has_interrupt(vcpu) is wrong too since ExtINT has higher
priority than APIC interrupts. In fact the latter fixes a bug:
when userspace requests an IRQ window vmexit, an interrupt in the
local APIC can cause kvm_cpu_has_interrupt() to be true and thus
kvm_vcpu_ready_for_interrupt_injection() to return false. When this
happens, vcpu_run does not exit to userspace but the interrupt window
vmexits keep occurring. The VM loops without any hope of making progress.
Once we try to fix these with something like
return kvm_arch_interrupt_allowed(vcpu) &&
- !kvm_cpu_has_interrupt(vcpu) &&
- !kvm_event_needs_reinjection(vcpu) &&
- kvm_cpu_accept_dm_intr(vcpu);
+ (!lapic_in_kernel(vcpu)
+ ? !vcpu->arch.interrupt.injected
+ : (kvm_apic_accept_pic_intr(vcpu)
+ && !pending_userspace_extint(v)));
we realize two things. First, thanks to the previous patch the complex
conditional can reuse !kvm_cpu_has_extint(vcpu). Second, the interrupt
window request in vcpu_enter_guest()
bool req_int_win =
dm_request_for_irq_injection(vcpu) &&
kvm_cpu_accept_dm_intr(vcpu);
should be kept in sync with kvm_vcpu_ready_for_interrupt_injection():
it is unnecessary to ask the processor for an interrupt window
if we would not be able to return to userspace. Therefore,
kvm_cpu_accept_dm_intr(vcpu) is basically !kvm_cpu_has_extint(vcpu)
ANDed with the existing check for masked ExtINT. It all makes sense:
- we can accept an interrupt from userspace if there is a place
to stash it (and, for irqchip split, ExtINTs are not masked).
Interrupts from userspace _can_ be accepted even if right now
EFLAGS.IF=0.
- in order to tell userspace we will inject its interrupt ("IRQ
window open" i.e. kvm_vcpu_ready_for_interrupt_injection), both
KVM and the vCPU need to be ready to accept the interrupt.
... and this is what the patch implements.
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Analyzed-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Centralize handling of interrupts from the userspace APIC
in kvm_cpu_has_extint and kvm_cpu_get_extint, since
userspace APIC interrupts are handled more or less the
same as ExtINTs are with split irqchip. This removes
duplicated code from kvm_cpu_has_injectable_intr and
kvm_cpu_has_interrupt, and makes the code more similar
between kvm_cpu_has_{extint,interrupt} on one side
and kvm_cpu_get_{extint,interrupt} on the other.
Cc: stable@vger.kernel.org
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
-----BEGIN PGP SIGNATURE-----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=oova
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for v5.10, take #4
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
J7200 main_i2c1 is connected to the i2c bus on the CPB marked as main_i2c3
The i2c1 devices on the CPB are _not_ connected to the SoC, they are not
usable with the J7200 SOM.
Correct the expander name from exp4 to exp3 and at the same time add the
line names as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201120073533.24486-3-peter.ujfalusi@ti.com
The J7200 SOM have additional io expander which is used to control several
SOM level muxes to make sure that the correct signals are routed to the
correct pin on the SOM <-> CPB connectors.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201120073533.24486-2-peter.ujfalusi@ti.com
A small set of driver specific fixes, plus a new platform quirk from
Hans.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/A98YACgkQJNaLcl1U
h9ClFggAgPr2/KIB3kRZCaKXaNgQ7oqgPdf0NNMYmwAnLaRK+t1EL0GdiyP5AxDA
sU9RWjoXyCmoe+dqmlS7Iavcj2Ne+y7w2isonrreI26LFrAkO8jL2mo656NArMjx
cxIhjF7sNWVbel2MYhrRSta8LkqrI8FiSV8elGW5DttGyceYHuoNXjo4AN3emnk3
V5kx9uT/kC1ef7SseLeN868VAMM5n42bZV+Eide/DJwYivlX7Hcwaqmax7FPjuYe
J/n3VrNh+AjABvpzPXBD+6e7X8aiYtQWAAtBz2FZLoL+4bREiG4qWP2kW4nwnisS
Bl0W0rE2LvctIKqkAey4/JUwwWCkXg==
=39QE
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.10
A small set of driver specific fixes, plus a new platform quirk from
Hans.
snd_soc_suspend() and soc_resume_deferred() are calling
same snd_soc_dapm_stream_event() with same logic with different parameter.
This patch adds new soc_dapm_suspend_resume() and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im9rekfp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_suspend() and soc_resume_deferred() are calling
same snd_soc_dai_digital_mute() with same logic with different parameter.
This patch adds new soc_playback_digital_mute() and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0u7ekfv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Device tree property is named typec-power-opmode, not power-opmode.
Fixes: da0cb63100 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201127131735.28280-1-amelie.delaunay@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers using legacy power management .suspen()/.resume() callbacks
have to manage PCI states and device's PM states themselves. They also
need to take care of standard configuration registers.
Switch to generic power management framework using a single
"struct dev_pm_ops" variable to take the unnecessary load from the driver.
This also avoids the need for the driver to directly call most of the PCI
helper functions and device power state control functions, as through
the generic framework PCI Core takes care of the necessary operations,
and drivers are required to do only device-specific jobs.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no reason to keep on using the __raw_{read,write}l() I/O
accessors in Renesas ARM driver code. Switch to using the plain
{read,write}l() I/O accessors, to have a chance that this works on
big-endian.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201119125214.4065925-1-geert+renesas@glider.be
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925 ("dma-mapping: zero memory returned from dma_alloc_*")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the warning: [-Werror=-Wframe-larger-than=]
drivers/media/tuners/mxl5005s.c: In function 'mxl5005s_reconfigure':
drivers/media/tuners/mxl5005s.c:3953:1:
warning: the frame size of 1152 bytes is larger than 1024 bytes
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The comment is using kernel-doc markup but that comment isn't a
kernel-doc comment so make it a normal one to avoid:
arch/x86/pci/i386.c:373: warning: Function parameter or member \
'pcibios_assign_resources' not described in 'fs_initcall'
[ bp: Massage and fixup comment while at it. ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1605257895-5536-5-git-send-email-alex.shi@linux.alibaba.com
We checked the table size against a hardcoded number of entries, and
that number was excluding the special mocs registers at the end.
Fixes: 977933b5da ("drm/i915/gt: Program mocs:63 for cache eviction on gen9")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127102540.13117-1-chris@chris-wilson.co.uk
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
-----BEGIN PGP SIGNATURE-----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=KSUM
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "errors".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "device".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled words "type" and "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "Any".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "in".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "controls".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "standard.".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We currently gate the update of the PMU state on the PMU being "ready".
The "ready" state is only set to true when the first vcpu run is
successful, and if it isn't, we never reach the update code.
So the "ready" state is never the right thing to check for, and it
should instead be the presence of the PMU feature, which makes
a bit more sense.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The handling of traps in access_pmu_evcntr() has a couple of
omminous "else return false;" statements that don't make any sense:
the decoding tree coverse all the registers that trap to this handler,
and returning false implies that we change PC, which we don't.
Get rid of what is evidently dead code.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is no RAZ/WI handling allowed for the PMU registers in the
ARMv8 architecture. Nobody can remember how we cam to the conclusion
that we could do this, but the ARMv8 ARM is pretty clear that we cannot.
Remove the RAZ/WI handling of the PMU system registers when it is
not configured.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The ARMv8 architecture says that in the absence of FEAT_PMUv3,
all the PMU-related register generate an UNDEF. Let's make
sure that all our PMU handers catch this case by hooking into
check_pmu_access_disabled(), and add checks in a couple of
other places.
Note that we still cannot deliver an exception into the guest
as the offending cases are already caught by the RAZ/WI handling.
But this puts us one step away to architectural compliance.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
