Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for
connecting WiFi/BT devices as a pluggable card via M.2 E-Key.
Add associated sdio0 nodes, properties.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com
[moved the unrelated rtc addition to a separate patch]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the hym8563 rtc found on the rk3288 variant of the VMARC SOM.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com
[split out of the original patch, as it was a change unrelated
to the commit description]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for UHS modes for the SD card connected at sdhci1. This
involves adding regulators for voltage switching and power cycling the
SD card and removing the no-1-8-v property.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201129175223.21751-3-nsekhar@ti.com
Instead of creating the sysfs attributes for the AP bus by hand,
describe them in .bus_groups and let the driver core handle it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-my: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
clang W=1 warns about missing prototypes:
>> arch/s390/kernel/vdso64/getcpu.c:8:5: warning: no previous prototype for function '__s390_vdso_getcpu' [-Wmissing-prototypes]
int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused)
^
Add a local header file in order to get rid of this warnings.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With the addition of more complete SR-IOV support, we are recommending
to raise this limit for distributions to 512, as the previous default of
128 can easily be hit with just the VFs of a single PCI physical
function.
With at least one distribution now shipping with this, supporting
only one fourth as many PCI functions on a default upstream build may
lead to confusion and reduced testing of the higher limit so increase
the default to 512.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add support for the Analog Devices ADAU1372 audio CODEC.
[Alexandre Belloni: allow 32kHz for TDM4 in slave mode]
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201127123030.1610574-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add NXP PF8100/PF8121A/PF8200 regulator driver.
PF8100/PF8121A/PF8200 is PMIC designed for highperformance
consumer applications. It features seven high efficiency buck,
four linear and one vsnvs regulators.
Tested in Engicam i.Core MX8M Mini SOM platform boards.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201130112329.104614-2-jagan@amarulasolutions.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not used anymore, ditch them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ALSA SoC has soc-jack.c, but doesn't have soc-jack.h.
This patch creates new soc-jack.h and moves snd_soc_jack_xxx()
from soc.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wny3u3zg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c don't need sound/jack.h anymore, but asoc.h needs it.
This patch fixup header magic.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2iju3zm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 0f0581b24b ("spi: fsl: Convert to use CS GPIO descriptors")
broke the use of the SPISEL_BOOT signal as a chip select on the
MPC8309.
pdata->max_chipselect, which becomes master->num_chipselect, must be
initialized to take into account the possibility that there's one more
chip select in use than the number of GPIO chip selects.
Cc: stable@vger.kernel.org # v5.4+
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Fixes: 0f0581b24b ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Link: https://lore.kernel.org/r/20201127152947.376-1-rasmus.villemoes@prevas.dk
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD Renoir driver tries to identify the presence of DMIC by evaluating
ACPI _WOV entry, and it returns -EINVAL when the ACPI call failed.
This ended up an error message like
snd_rn_pci_acp3x: probe of 0000:04:00.5 failed with error -22
although the system is correctly set up.
For avoiding such a superfluous error message, change the return value
to -ENODEV. Then the driver core just skips to the next one without
complaining.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201127143200.16272-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The acp3x raven driver skips the probing when the given device isn't
connected with I2S. This skip behavior itself is fine, but the driver
also emits an error message "Invalid ACP audio mode" with KERN_ERR.
This isn't nice since it appears on the boot screen even if a boot
splash is running, although this itself is no real error.
Downgrade the print level to KERN_INFO so that this message won't
appear on the console unnecessarily.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201127143200.16272-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new GEM object function drm_gem_cma_mmap() sets the VMA flags
and offset as in the old implementation and immediately maps in the
buffer's memory pages.
Changing CMA helpers to use the GEM object function allows for the
removal of the special implementations for mmap and gem_prime_mmap
callbacks. The regular functions drm_gem_mmap() and drm_gem_prime_mmap()
are now used.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123115646.11004-3-tzimmermann@suse.de
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In debug_exception_enter() and debug_exception_exit() we trace hardirqs
on/off while RCU isn't guaranteed to be watching, and we don't save and
restore the hardirq state, and so may return with this having changed.
Handle this appropriately with new entry/exit helpers which do the bare
minimum to ensure this is appropriately maintained, without marking
debug exceptions as NMIs. These are placed in entry-common.c with the
other entry/exit helpers.
In future we'll want to reconsider whether some debug exceptions should
be NMIs, but this will require a significant refactoring, and for now
this should prevent issues with lockdep and RCU.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marins <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-12-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Exceptions which can be taken at (almost) any time are consdiered to be
NMIs. On arm64 that includes:
* SDEI events
* GICv3 Pseudo-NMIs
* Kernel stack overflows
* Unexpected/unhandled exceptions
... but currently debug exceptions (BRKs, breakpoints, watchpoints,
single-step) are not considered NMIs.
As these can be taken at any time, kernel features (lockdep, RCU,
ftrace) may not be in a consistent kernel state. For example, we may
take an NMI from the idle code or partway through an entry/exit path.
While nmi_enter() and nmi_exit() handle most of this state, notably they
don't save/restore the lockdep state across an NMI being taken and
handled. When interrupts are enabled and an NMI is taken, lockdep may
see interrupts become disabled within the NMI code, but not see
interrupts become enabled when returning from the NMI, leaving lockdep
believing interrupts are disabled when they are actually disabled.
The x86 code handles this in idtentry_{enter,exit}_nmi(), which will
shortly be moved to the generic entry code. As we can't use either yet,
we copy the x86 approach in arm64-specific helpers. All the NMI
entrypoints are marked as noinstr to prevent any instrumentation
handling code being invoked before the state has been corrected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-11-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There are periods in kernel mode when RCU is not watching and/or the
scheduler tick is disabled, but we can still take exceptions such as
interrupts. The arm64 exception handlers do not account for this, and
it's possible that RCU is not watching while an exception handler runs.
The x86/generic entry code handles this by ensuring that all (non-NMI)
kernel exception handlers call irqentry_enter() and irqentry_exit(),
which handle RCU, lockdep, and IRQ flag tracing. We can't yet move to
the generic entry code, and already hadnle the user<->kernel transitions
elsewhere, so we add new kernel<->kernel transition helpers alog the
lines of the generic entry code.
Since we now track interrupts becoming masked when an exception is
taken, local_daif_inherit() is modified to track interrupts becoming
re-enabled when the original context is inherited. To balance the
entry/exit paths, each handler masks all DAIF exceptions before
exit_to_kernel_mode().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-10-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Exceptions from EL1 may be taken when RCU isn't watching (e.g. in idle
sequences), or when the lockdep hardirqs transiently out-of-sync with
the hardware state (e.g. in the middle of local_irq_enable()). To
correctly handle these cases, we'll need to save/restore this state
across some exceptions taken from EL1.
A series of subsequent patches will update EL1 exception handlers to
handle this. In preparation for this, and to avoid dependencies between
those patches, this patch adds two new fields to struct pt_regs so that
exception handlers can track this state.
Note that this is placed in pt_regs as some entry/exit sequences such as
el1_irq are invoked from assembly, which makes it very difficult to add
a separate structure as with the irqentry_state used by x86. We can
separate this once more of the exception logic is moved to C. While the
fields only need to be bool, they are both made u64 to keep pt_regs
16-byte aligned.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-9-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When built with PROVE_LOCKING, NO_HZ_FULL, and CONTEXT_TRACKING_FORCE
will WARN() at boot time that interrupts are enabled when we call
context_tracking_user_enter(), despite the DAIF flags indicating that
IRQs are masked.
The problem is that we're not tracking IRQ flag changes accurately, and
so lockdep believes interrupts are enabled when they are not (and
vice-versa). We can shuffle things so to make this more accurate. For
kernel->user transitions there are a number of constraints we need to
consider:
1) When we call __context_tracking_user_enter() HW IRQs must be disabled
and lockdep must be up-to-date with this.
2) Userspace should be treated as having IRQs enabled from the PoV of
both lockdep and tracing.
3) As context_tracking_user_enter() stops RCU from watching, we cannot
use RCU after calling it.
4) IRQ flag tracing and lockdep have state that must be manipulated
before RCU is disabled.
... with similar constraints applying for user->kernel transitions, with
the ordering reversed.
The generic entry code has enter_from_user_mode() and
exit_to_user_mode() helpers to handle this. We can't use those directly,
so we add arm64 copies for now (without the instrumentation markers
which aren't used on arm64). These replace the existing user_exit() and
user_exit_irqoff() calls spread throughout handlers, and the exception
unmasking is left as-is.
Note that:
* The accounting for debug exceptions from userspace now happens in
el0_dbg() and ret_to_user(), so this is removed from
debug_exception_enter() and debug_exception_exit(). As
user_exit_irqoff() wakes RCU, the userspace-specific check is removed.
* The accounting for syscalls now happens in el0_svc(),
el0_svc_compat(), and ret_to_user(), so this is removed from
el0_svc_common(). This does not adversely affect the workaround for
erratum 1463225, as this does not depend on any of the state tracking.
* In ret_to_user() we mask interrupts with local_daif_mask(), and so we
need to inform lockdep and tracing. Here a trace_hardirqs_off() is
sufficient and safe as we have not yet exited kernel context and RCU
is usable.
* As PROVE_LOCKING selects TRACE_IRQFLAGS, the ifdeferry in entry.S only
needs to check for the latter.
* EL0 SError handling will be dealt with in a subsequent patch, as this
needs to be treated as an NMI.
Prior to this patch, booting an appropriately-configured kernel would
result in spats as below:
| DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())
| WARNING: CPU: 2 PID: 1 at kernel/locking/lockdep.c:5280 check_flags.part.54+0x1dc/0x1f0
| Modules linked in:
| CPU: 2 PID: 1 Comm: init Not tainted 5.10.0-rc3 #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 804003c5 (Nzcv DAIF +PAN -UAO -TCO BTYPE=--)
| pc : check_flags.part.54+0x1dc/0x1f0
| lr : check_flags.part.54+0x1dc/0x1f0
| sp : ffff80001003bd80
| x29: ffff80001003bd80 x28: ffff66ce801e0000
| x27: 00000000ffffffff x26: 00000000000003c0
| x25: 0000000000000000 x24: ffffc31842527258
| x23: ffffc31842491368 x22: ffffc3184282d000
| x21: 0000000000000000 x20: 0000000000000001
| x19: ffffc318432ce000 x18: 0080000000000000
| x17: 0000000000000000 x16: ffffc31840f18a78
| x15: 0000000000000001 x14: ffffc3184285c810
| x13: 0000000000000001 x12: 0000000000000000
| x11: ffffc318415857a0 x10: ffffc318406614c0
| x9 : ffffc318415857a0 x8 : ffffc31841f1d000
| x7 : 647261685f706564 x6 : ffffc3183ff7c66c
| x5 : ffff66ce801e0000 x4 : 0000000000000000
| x3 : ffffc3183fe00000 x2 : ffffc31841500000
| x1 : e956dc24146b3500 x0 : 0000000000000000
| Call trace:
| check_flags.part.54+0x1dc/0x1f0
| lock_is_held_type+0x10c/0x188
| rcu_read_lock_sched_held+0x70/0x98
| __context_tracking_enter+0x310/0x350
| context_tracking_enter.part.3+0x5c/0xc8
| context_tracking_user_enter+0x6c/0x80
| finish_ret_to_user+0x2c/0x13cr
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-8-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for reworking the EL1 irq/nmi entry code, move the
existing logic to C. We no longer need the asm_nmi_enter() and
asm_nmi_exit() wrappers, so these are removed. The new C functions are
marked noinstr, which prevents compiler instrumentation and runtime
probing.
In subsequent patches we'll want the new C helpers to be called in all
cases, so we don't bother wrapping the calls with ifdeferry. Even when
the new C functions are stubs the trivial calls are unlikely to have a
measurable impact on the IRQ or NMI paths anyway.
Prototypes are added to <asm/exception.h> as otherwise (in some
configurations) GCC will complain about the lack of a forward
declaration. We already do this for existing function, e.g.
enter_from_user_mode().
The new helpers are marked as noinstr (which prevents all
instrumentation, tracing, and kprobes). Otherwise, there should be no
functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-7-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In a subsequent patch ret_to_user will need to make a C function call
(in some configurations) which may clobber x0-x18 at the start of the
finish_ret_to_user block, before enable_step_tsk consumes the flags
loaded into x1.
In preparation for this, let's load the flags into x19, which is
preserved across C function calls. This avoids a redundant reload of the
flags and ensures we operate on a consistent shapshot regardless.
There should be no functional change as a result of this patch. At this
point of the entry/exit paths we only need to preserve x28 (tsk) and the
sp, and x19 is free for this use.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-6-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In later patches we'll want to extend enter_from_user_mode() and add a
corresponding exit_to_user_mode(). As these will be common for all
entries/exits from userspace, it'd be better for these to live in
entry-common.c with the rest of the entry logic.
This patch moves enter_from_user_mode() into entry-common.c. As with
other functions in entry-common.c it is marked as noinstr (which
prevents all instrumentation, tracing, and kprobes) but there are no
other functional changes.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Functions in entry-common.c are marked as notrace and NOKPROBE_SYMBOL(),
but they're still subject to other instrumentation which may rely on
lockdep/rcu/context-tracking being up-to-date, and may cause nested
exceptions (e.g. for WARN/BUG or KASAN's use of BRK) which will corrupt
exceptions registers which have not yet been read.
Prevent this by marking all functions in entry-common.c as noinstr to
prevent compiler instrumentation. This also blacklists the functions for
tracing and kprobes, so we don't need to handle that separately.
Functions elsewhere will be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Core code disables RCU when calling arch_cpu_idle(), so it's not safe
for arch_cpu_idle() or its calees to be instrumented, as the
instrumentation callbacks may attempt to use RCU or other features which
are unsafe to use in this context.
Mark them noinstr to prevent issues.
The use of local_irq_enable() in arch_cpu_idle() is similarly
problematic, and the "sched/idle: Fix arch_cpu_idle() vs tracing" patch
queued in the tip tree addresses that case.
Reported-by: Marco Elver <elver@google.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In el0_svc_common() we unmask exceptions before we call user_exit(), and
so there's a window where an IRQ or debug exception can be taken while
RCU is not watching. In do_debug_exception() we account for this in via
debug_exception_{enter,exit}(), but in the el1_irq asm we do not and we
call trace functions which rely on RCU before we have a guarantee that
RCU is watching.
Let's avoid this by having el0_svc_common() exit userspace before
unmasking exceptions, matching what we do for all other EL0 entry paths.
We can use user_exit_irqoff() to avoid the pointless save/restore of IRQ
flags while we're sure exceptions are masked in DAIF.
The workaround for Cortex-A76 erratum 1463225 may trigger a debug
exception before this point, but the debug code invoked in this case is
safe even when RCU is not watching.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201130115950.22492-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
As 'perf_evsel__' means its a function in tools/lib/perf/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It calculates IPC from the cycles and instruction counts and compares it
with the shadow stat for both global aggregation (default) and no
aggregation mode.
$ perf stat -a -A -e cycles,instructions sleep 1
Performance counter stats for 'system wide':
CPU0 39,580,880 cycles
CPU1 45,426,945 cycles
CPU2 31,151,685 cycles
CPU3 55,167,421 cycles
CPU0 17,073,564 instructions # 0.43 insn per cycle
CPU1 34,955,764 instructions # 0.77 insn per cycle
CPU2 15,688,459 instructions # 0.50 insn per cycle
CPU3 34,699,217 instructions # 0.63 insn per cycle
1.003275495 seconds time elapsed
In this example, the 'insn per cycle' should be matched to the number
for each cpu. For CPU2, 0.50 = 15,688,459 / 31,151,685 .
Committer testing:
# perf test shadow
78: perf stat metrics (shadow stat) test : Ok
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201127041404.390276-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the error handling in c_can_power_up(), there are two bugs:
1) c_can_pm_runtime_get_sync() will increase usage counter if device is not
empty. Forgetting to call c_can_pm_runtime_put_sync() will result in a
reference leak here.
2) c_can_reset_ram() operation will set start bit when enable is true. We
should clear it in the error handling.
We fix it by adding c_can_pm_runtime_put_sync() for 1), and
c_can_reset_ram(enable is false) for 2) in the error handling.
Fixes: 8212003260 ("can: c_can: Add d_can suspend resume support")
Fixes: 52cde85acc ("can: c_can: Add d_can raminit support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201128133922.3276973-2-zhangqilong3@huawei.com
[mkl: return "0" instead of "ret"]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Losing arbitration is normal in a CAN-bus network, it means that a higher
priority frame is being send and the pending message will be retried later.
Hence most driver only increment arbitration_lost, but the sun4i driver also
incremeants tx_error, causing errors to be reported on a normal functioning
CAN-bus. So stop counting them as errors.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com
[mkl: split into two seperate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Losing arbitration is normal in a CAN-bus network, it means that a higher
priority frame is being send and the pending message will be retried later.
Hence most driver only increment arbitration_lost, but the sja1000 driver also
incremeants tx_error, causing errors to be reported on a normal functioning
CAN-bus. So stop counting them as errors.
Fixes: 8935f57e68 ("can: sja1000: fix network statistics update")
Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com
[mkl: split into two seperate patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The clocks mcan_class->cclk and mcan_class->hclk are not prepared by any call
during tcan4x5x_can_probe(), so remove erroneous clk_disable_unprepare() on
them.
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Link: http://lore.kernel.org/r/20201130114252.215334-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Maple Ridge is first discrete USB4 host controller from Intel. It comes
with firmware based connection manager and the flows are similar as used
in Intel Titan Ridge.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Intel Maple Ridge and Tiger Lake connection manager firmware implements
a USB4 router operation proxy that should be used instead of direct
register access to avoid races with the firmware. This is supported in
all firmwares where the protocol version field returned in the driver
ready response is 3 (or higher).
This adds the USB4 router proxy operations support to the driver so that
we first check the protocol version and if it is 3 (or higher) the USB4
router operation is run through the firmware provided proxy. Otherwise
the native version is used.
Most USB4 router proxy operations are pretty straightforward except
NVM_AUTH where the firmware only responds once the router is restarted
but before it sends device connected notification. To support this we
split the operation so that the reply is received asynchronously and
stored to struct icm. This last reply is then returned in
icm_usb4_switch_nvm_authenticate_status() if available.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We are going to use these in subsequent patch so make them available
outside of usb4.c.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
