Remove a level of indirection by getting the device directly from the
passed-in struct snd_soc_dai, instead of going through its component.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Each left/right pair of AIF input/output channels can be swapped or
combined. This is useful for sending a mono audio source to both sides
of a stereo sink, or for creating complex mixing scenarios.
Add the support to control this feature from userspace.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the left and right side widgets referenced channel 0. This would
unnecessarily power on the right side widget (and its associated path)
when a mono stream was active.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Whie the aif_in and aif_out widget types are handled exactly the same in
the core DAPM code, a future widget event hook will need the correct
widget type to derive the associated substream. Clean up the widget type
for that reason, and so these widgets will match newly-added widgets for
the other AIFs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This cleans up the mixer widget names. The AIF1 AD0 Mixer names were
previously wrong -- they do not control the digital side of the ADC. The
DAC mixer widgets were not wrong, but they were verbose and did not
match the naming scheme of the other widgets.
The mixer controls are not renamed because they are exposed to
userspace.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the remaining pieces of the DAPM driver so that they are all in the
same order among controls/widgets/routes, and so they roughly match the
register word and bit order of the hardware. This nicely separates the
AIF-related widgets from the ADC/DAC widgets, which allows the AIF
widgets to stay in a logical order as more AIFs are added to the driver.
No widgets are renamed, to ease verification that this commit makes no
functional change.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the module power-up/down sequence from the vendor's driver.
While updating these widgets/routes, reorder them to match the register
and bit layout of the hardware. This puts them in the same place in the
widget and route arrays (previously they were at opposite ends), and it
makes it easier to track which parts of which registers are implemented.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i codec is effectively an on-die variant of the X-Powers AC100
codec. The AC100 can derive its clocks from either of two I2S master
clocks or an internal PLL. For the on-die variant, Allwinner replaced
the codec's own PLL with a connection to SoC's existing PLL_AUDIO, and
they connected both I2S MCLK inputs to the same source -- which happens
to be an integer divider from the same PLL_AUDIO.
So there's actually no clocking flexibility. To run SYSCLK at the
required rate, it must be run straight from the PLL. The only choice is
whether it goes through AIF1CLK or AIF2CLK. Since both run at the same
rate, the only effect of that choice is which field in SYS_SR_CTRL
(AIF1_FS or AIF2_FS) controls the system sample rate.
Since AIFnCLK is required to bring up the corresponding DAI, and AIF1
(connected to the CPU) is used most often, let's use AIF1CLK as the
SYSCLK parent. That means we no longer need to set AIF2_FS.
Since this clock tree never changes, we can program it from the
component probe function, instead of using DAPM widgets. The DAPM
widgets unnecessarily change clock parents when the codec goes in/out
of idle and the supply widgets are powered up/down.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20201001021148.15852-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By representing the module clock as a DAPM widget, we ensure that the
clock is only enabled when the module is actually in use, without
additional code in runtime PM hooks.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200831034852.18841-10-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When attached to the regmap, the bus clock is automatically enabled as
needed to access device registers. This avoids needing code to manage it
separately in the driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200831034852.18841-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
All other definitions are sorted from largest to smallest bit number.
This makes the AIF1CLK_CTRL mask constants consistent with them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Several fields have inconsistent indentation, presumably because the
patch "looked correct" due to the additional "+" character at the
beginning of the line.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though they are for the left channel mixer, they are documented as
"MXR_SRC". This matches the naming scheme used for the main DAC. The "R"
is part of the abbreviation for "mixer", not a reference to the channel.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is for the digital part of the codec only. The analog part,
including the microphone inputs, is managed by a separate driver. These
widgets look like they were copied from sun4i-codec. Since they do not
perform any function in this driver, remove them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200831034852.18841-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to a mistake made while reordering patches, commit 90cac93297
("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") added
the sun8i_codec_component_probe function without referencing it from
the component definition. Add the reference so the probe function gets
called as expected.
Fixes: 90cac93297 ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200819034038.46418-1-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This series performs some minor cleanup on the driver for the analog
codec in the Allwinner A64, and hooks up the existing mute switches to
DAPM widgets, in order to provide improved power management.
Changes since v1:
- Collected Acked-by/Reviewed-by tags
- Used SOC_MIXER_NAMED_CTL_ARRAY to avoid naming a widget "Earpiece"
Samuel Holland (8):
ASoC: sun50i-codec-analog: Fix duplicate use of ADC enable bits
ASoC: sun50i-codec-analog: Gate the amplifier clock during suspend
ASoC: sun50i-codec-analog: Group and sort mixer routes
ASoC: sun50i-codec-analog: Make headphone routes stereo
ASoC: sun50i-codec-analog: Enable DAPM for headphone switch
ASoC: sun50i-codec-analog: Make line out routes stereo
ASoC: sun50i-codec-analog: Enable DAPM for line out switch
ASoC: sun50i-codec-analog: Enable DAPM for earpiece switch
sound/soc/sunxi/sun50i-codec-analog.c | 176 ++++++++++++++++----------
1 file changed, 111 insertions(+), 65 deletions(-)
--
2.26.2
This series fixes a couple of issues with the digital audio codec in the
Allwinner A64 SoC:
1) Left/right channels were swapped when playing/recording audio
2) DAPM topology was wrong, breaking some kcontrols
This is the minimum set of changes necessary to fix these issues in a
backward-compatible way. For that reason, some DAPM widgets still have
incorrect or confusing names; those and other issues will be fixed in
later patch sets.
Samuel Holland (7):
ASoC: dt-bindings: Add a new compatible for the A64 codec
ASoC: sun8i-codec: Fix DAPM to match the hardware topology
ASoC: sun8i-codec: Add missing mixer routes
ASoC: sun8i-codec: Add a quirk for LRCK inversion
ARM: dts: sun8i: a33: Update codec widget names
arm64: dts: allwinner: a64: Update codec widget names
arm64: dts: allwinner: a64: Update the audio codec compatible
.../sound/allwinner,sun8i-a33-codec.yaml | 6 +-
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 4 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 8 +-
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 8 +-
.../boot/dts/allwinner/sun50i-a64-pine64.dts | 8 +-
.../dts/allwinner/sun50i-a64-pinebook.dts | 8 +-
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 8 +-
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 8 +-
.../allwinner/sun50i-a64-sopine-baseboard.dts | 8 +-
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 8 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 11 +-
sound/soc/sunxi/sun8i-codec.c | 137 ++++++++++++++----
13 files changed, 155 insertions(+), 71 deletions(-)
--
2.26.2
By including the earpiece mute switch in the DAPM graph, both the
earpiece amplifier and the Mixer/DAC inputs can be powered off when
the earpiece is muted.
While the widget is really just a simple switch, it is represented
as a "mixer with named controls" to avoid including the widget name
in the kcontrol name. Otherwise, it is not possible to give the widget
an accurate, descriptive name without changing the kcontrol name
seen by userspace (which should be stable).
The mute switch is between the source selection and the amplifier,
as per the diagram in the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726025334.59931-9-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the line out mute switch in the DAPM graph, the
Mixer/DAC inputs can be powered off when the line output is muted.
The line outputs have an unusual routing scheme. The left side mute
switch is between the source selection and the amplifier, as usual.
The right side source selection comes *after* its amplifier (and
after the left side amplifier), and its mute switch controls
whichever source is currently selected. This matches the diagram in
the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-8-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the hardware more accurately, and is necessary for
including the (stereo) line out mute switch in the DAPM graph.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By including the headphone mute switch to the DAPM graph, both the
headphone amplifier and the Mixer/DAC inputs can be powered off when
the headphones are muted.
The mute switch is between the source selection and the amplifier,
as per the diagram in the SoC manual.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-6-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This matches the hardware more accurately, and is necessary for
including the (stereo) headphone mute switch in the DAPM graph.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the controls in the same order as the bits in the register. Then
group the routes by sink, and sort them in the same order as the
controls. This makes it much easier to verify that all mixer inputs are
accounted for.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock must be running for the zero-crossing mute functionality.
However, it must be gated for VDD-SYS to be turned off during system
suspend. Disable it in the suspend callback, after everything has
already been muted, to avoid pops when muting/unmuting outputs.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The same enable bits are currently used for both the "Left/Right ADC"
and the "Left/Right ADC Mixer" widgets. This happens to work in practice
because the widgets are always enabled/disabled at the same time, but
each register bit should only be associated with a single widget.
To keep symmetry with the DAC widgets, keep the bits on the ADC widgets,
and remove them from the ADC Mixer widgets.
Fixes: 42371f327d ("ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls")
Reported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200726025334.59931-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On the A64, as tested using the PinePhone, the current code causes the
left/right channels to be swapped during I2S playback from the CPU on
AIF1, and breaks DSP_A communication with the modem on AIF2. Both of
these are fixed when LRCK is no longer inverted.
Trusting that the comment in the code is correct, the existing behavior
is kept for the A33.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sun8i-codec driver provides ALSA controls for enabling/disabling
each of the inputs to the AIF1 Slot 0 and DAC mixers. For two of these
inputs (ADC->DAC and AIF1 DA0->AIF1 AD0), the audio source is
implemented, so the mixer inputs can be used.
However, because the DAPM routes are missing, these mixer inputs only
work when both the source and the mixer happen to be part of other
active audio paths. Adding the appropriate routes makes these ALSA
controls function all of the time.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The A33/A64 digital codec has 4 physical inputs and 4 physical outputs:
3 AIFs/DAIs and one ADC/DAC pair. Internal routing is accomplished by
a 4-channel mixer connected to each output.
The analog and digital sides of the ADC/DAC are in separate ASoC
components, so card-level DAPM routes (provided in the device tree) are
necessary to connect them together. Currently, these routes are wrong.
For AIF1 Playback, the correct topology is:
||<<============ sun8i-codec ===========>>||
|| ||
CPU DAI -> AIF1 DA0 -> DAC Mixer -> DAC (digital) -> DAC (analog)
|| ||
but the driver and device trees currently describe:
|| ||
CPU DAI -> AIF1 DA0 -------------------------------> DAC (analog)
|| \--> DAC Mixer -> ??? [dead end] ||
For AIF1 Capture, there is an additional problem, because the Mixer
route is backward. The topology should be:
|| ||
ADC (analog) -> ADC (digital) -> AIF1 AD0 Mixer -> AIF1 AD0 -> CPU DAI
|| ||
but the driver and device trees currently describe:
|| ||
ADC (analog) -> AIF1 AD0 ------------------------------------> CPU DAI
|| \--> ADC Mixer -> ??? [dead end] ||
The ADC/DAC are only powered because AIF1 AD0 (capture) has supply
routes from the ADC, and AIF1 DA0 (playback) has supply routes from the
DAC. However, neither set of supply routes matches the hardware
topology. Audio can be routed among AIF1/2/3 without using the ADC or
DAC at all; and audio can be routed from the ADC to the DAC without
using any AIFs (via the "ADC Digital DAC Playback Switch"). Because the
DAPM routes are wrong, both of these use cases are currently broken.
This commit adds the necessary widgets and routes to represent the real
hardware topology, with functionality equivalent to the current driver.
For the existing "allwinner,sun8i-a33-codec" compatible, widgets with
the old names are kept as wrappers around the new widgets, so existing
device trees will continue to work. For "allwinner,sun50i-a64-codec",
the old widgets can be omitted, because no device trees yet use that
compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200726012557.38282-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Property name descriptions need to match exactly.
Fixes the following W=1 kernel build warning(s):
sound/soc/sunxi/sun4i-spdif.c:178: warning: Function parameter or
member 'reg_dac_txdata' not described in 'sun4i_spdif_quirks'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Andrea Venturi <be17068@iperbole.bo.it>
Cc: Marcus Cooper <codekipper@gmail.com>
Link: https://lore.kernel.org/r/20200709162328.259586-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix W=1 warnings - missing fields in description
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or
member 'bclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'num_bclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'mclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'num_mclk_dividers' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'get_bclk_parent_rate' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'get_sr' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'get_wss' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'set_chan_cfg' not described in 'sun4i_i2s_quirks'
sound/soc/sunxi/sun4i-i2s.c:160: warning: Function parameter or member
'set_fmt' not described in 'sun4i_i2s_quirks'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Andrea Venturi <be17068@iperbole.bo.it>
Link: https://lore.kernel.org/r/20200709162328.259586-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is not used anywhere in the driver, so remove it.
Fixes: 36c684936f ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200217064250.15516-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the correct mask for this two-bit field. This fixes setting the DAI
data format to RIGHT_J or DSP_A.
Fixes: 36c684936f ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The last set of reworks included some fixes to change the A83t behaviour
and "fix" it.
It turns out that the controller described in the datasheet and the one
supported here are not the same, yet the A83t has the two of them, and the
one supported in the driver wasn't the one described in the datasheet.
Fix this by reintroducing the proper quirks.
Fixes: 69e450e50c ("ASoC: sun4i-i2s: Fix the LRCK period on A83t")
Fixes: bf943d5279 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t")
Fixes: 2e04fc4dbf ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t")
Fixes: 515fcfbc77 ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs")
Fixes: c1d3a921d7 ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs")
Fixes: fb19739d7f ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs")
Fixes: 71137bcd0a ("ASoC: sun4i-i2s: Move the format configuration to a callback")
Fixes: d70be625f2 ("ASoC: sun4i-i2s: Move the channel configuration to a callback")
Reported-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190827123131.29129-2-mripard@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 3e9acd7ac6 (ASoC: sun4i-i2s: Remove
duplicated quirks structure").
It turns out that while one I2S controller is described in the A83t
datasheet, the driver supports another, undocumented, one that has been
inherited from the older SoCs, while the documented one uses the new
design.
Fixes: 3e9acd7ac6 ("ASoC: sun4i-i2s: Remove duplicated quirks structure")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190827093206.17919-1-mripard@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In addition to the I2S format, the controller also supports the DSP_*
formats.
This requires some extra care on the LRCK period calculation, since the
controller, with the PCM formats, require that the value set is no longer
the periods of LRCK for a single channel, but for all of them.
Let's add the code to deal with this, and support the DSP_A and DSP_B
formats.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/5562db1ac8759f12b1b87c3258223eed629ef771.1566392800.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LRCK period field in the FMT0 register holds the number of LRCK period
for one channel in I2S mode.
This has been hardcoded to 32, while it really should be the physical width
of the format, which creates an improper clock when using a 16bit format,
with the i2s controller as LRCK master.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/f08a0c3605cd1d79752b38d704690190183f7865.1566392800.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock dividers function has been using the word size to compute the
clock rate at which it's supposed to be running, but the proper formula
would be to use the physical width and / or slot width in TDM.
It doesn't make any difference at the moment since all the formats
supported have the same sample width and physical width, but it's not going
to last forever.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/41a359d9885f397e066816961e5e3236afcbe0a1.1566392800.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The channels number have been hardcoded to 2 so far, while the controller
supports more than that.
Remove the instance where it has been hardcoded to compute the BCLK
divider, and pass it through as an argument to ease further support of more
channels.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/48887cf7abfaab6597db233b24d7a088a913e48a.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
