The AON HSP node's "reg" property size 0xa0000 will overlap with other
resources. This patch fixes that wrong value with correct size 0x90000.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Fixes: a38570c22e ("arm64: tegra: Add nodes for TCU on Tegra194")
Signed-off-by: Thierry Reding <treding@nvidia.com>
USB host mode is broken on the OTG port of Jetson TX1 platform because
the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the
vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be
regulator@14.
Fixes: 257c8047be ("arm64: tegra: jetson-tx1: Add camera supplies")
Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC
to a 12-pin debug header. The UARTs can be used by either the Tegra
Combined UART (TCU) driver or the Tegra 8250 driver. By default, the
TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for
Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this
by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250
node for UARTA.
Fixes: 3f9efbbe57 ("arm64: tegra: Add support for Jetson Xavier NX")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit ff4c371d2b ("arm64: defconfig: Build ADMA and ACONNECT driver")
enable the Tegra ADMA and ACONNECT drivers and this is causing resume
from system suspend to fail on Jetson TX2. Resume is failing because the
ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT
driver is attempting to power on a power-domain that is provided by the
BPMP. While a proper fix for the resume sequencing problem is identified,
disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system
suspend.
Please note that ACONNECT driver is used by the Audio Processing Engine
(APE) on Tegra, but because there is no mainline support for APE on
Jetson TX2 currently, disabling the ACONNECT does not disable any useful
feature at the moment.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When SPI DW memory ops support was introduced, there was a check for
excluding controllers which supplied their own CS function. Even so,
the mem_ops pointer is *always* presented to the SPI core.
This causes the SPI core sanity check in spi_controller_check_ops() to
refuse registration, since a mem_ops pointer is being supplied without
an exec_op member function.
The end result is failure of the SPI DW driver on sparx5 and similar
platforms.
The fix in the core SPI DW driver is to avoid presenting the mem_ops
pointer if the exec_op function is not set.
Fixes: 6423207e57 (spi: dw: Add memory operations support)
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20201120213414.339701-1-lars.povlsen@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 327d5b2fee ("iommu/vt-d: Allow 32bit devices to uses DMA
domain"), swiotlb could also be used for direct memory access if IOMMU
is enabled but a device is configured to pass through the DMA translation.
Keep swiotlb when IOMMU is forced on, otherwise, some devices won't work
if "iommu=pt" kernel parameter is used.
Fixes: 327d5b2fee ("iommu/vt-d: Allow 32bit devices to uses DMA domain")
Reported-and-tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201125014124.4070776-1-baolu.lu@linux.intel.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210237
Signed-off-by: Will Deacon <will@kernel.org>
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].
It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Only in smp systems the cache policy is setup as write alloc, in
single cpu systems the cache policy is set as writeback and it is
normal memory, so, it should pass the is_normal_memory check in the
share memory registration.
Add the right condition to make it work in no smp systems.
Fixes: cdbcf83d29 ("tee: optee: check type of registered shared memory")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 2f0ddd89fe ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de
(cherry-picked from 8e3784dfef)
Size is page count here.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1372
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d836917da7)
[airlied: from drm-next]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Make an explicit suggestion how to post user space side of kernel
patches to avoid reposts when patchwork groups the wrong patches.
v2: mention the cases unlike iproute2 explicitly
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- set module owner to THIS_MODULE, by Taehee Yoo
-----BEGIN PGP SIGNATURE-----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=Qr0B
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20201124' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- set module owner to THIS_MODULE, by Taehee Yoo
* tag 'batadv-net-pullrequest-20201124' of git://git.open-mesh.org/linux-merge:
batman-adv: set .owner to THIS_MODULE
====================
Link: https://lore.kernel.org/r/20201124134417.17269-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on the discussion with Sukadev Bhattiprolu and Dany Madden,
we believe that checking adapter->resetting bit is preferred
since RESETTING state flag is not as strict as resetting bit.
RESETTING state flag is removed since it is verbose now.
Fixes: 7d7195a026 ("ibmvnic: Do not process device remove during device reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Agroskin says:
====================
Fixes for ENA driver
- fix wrong data offset on machines that support rx offset
- work-around Intel iommu issue
- fix out of bound access when request id is wrong
====================
Link: https://lore.kernel.org/r/20201123190859.21298-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes two lines in which the rx_offset received by the device
wasn't taken into account:
- prefetch function:
In our driver the copied data would reside in
rx_info->page + rx_headroom + rx_offset
so the prefetch function is changed accordingly.
- setting page_offset to zero for descriptors > 1:
for every descriptor but the first, the rx_offset is zero. Hence
the page_offset value should be set to rx_headroom.
The previous implementation changed the value of rx_info after
the descriptor was added to the SKB (essentially providing wrong
page offset).
Fixes: 68f236df93 ("net: ena: add support for the rx offset feature")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA driver uses the readless mechanism, which uses DMA, to find
out what the DMA mask is supposed to be.
If DMA is used without setting the dma_mask first, it causes the
Intel IOMMU driver to think that ENA is a 32-bit device and therefore
disables IOMMU passthrough permanently.
This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48
before readless initialization in
ena_device_init()->ena_com_mmio_reg_read_request_init(),
which is large enough to workaround the intel_iommu issue.
DMA mask is set again to the correct value after it's received from the
device after readless is initialized.
The patch also changes the driver to use dma_set_mask_and_coherent()
function instead of the two pci_set_dma_mask() and
pci_set_consistent_dma_mask() ones. Both methods achieve the same
effect.
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Mike Cui <mikecui@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After request id is checked in validate_rx_req_id() its value is still
used in the line
rx_ring->free_ids[next_to_clean] =
rx_ring->ena_bufs[i].req_id;
even if it was found to be out-of-bound for the array free_ids.
The patch moves the request id to an earlier stage in the napi routine and
makes sure its value isn't used if it's found out-of-bounds.
Fixes: 30623e1ed1 ("net: ena: avoid memory access violation by validating req_id properly")
Signed-off-by: Ido Segev <idose@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix Exiu driver trigger type when using ACPI
- Fix GICv3 ITS suspend/resume to use the in-kernel path
at all times, sidestepping braindead firmware support
-----BEGIN PGP SIGNATURE-----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=IjDX
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix Exiu driver trigger type when using ACPI
- Fix GICv3 ITS suspend/resume to use the in-kernel path
at all times, sidestepping braindead firmware support
Link: https://lore.kernel.org/r/20201122184752.553990-1-maz@kernel.org
-----BEGIN PGP SIGNATURE-----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=lxdD
-----END PGP SIGNATURE-----
Merge tag '5.10-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four smb3 fixes for stable: one fixes a memleak, the other three
address a problem found with decryption offload that can cause a use
after free"
* tag '5.10-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Handle error case during offload read path
smb3: Avoid Mid pending list corruption
smb3: Call cifs reconnect from demultiplex thread
cifs: fix a memleak with modefromsid
Twice now, when exercising ext4 looped on shmem huge pages, I have crashed
on the PF_ONLY_HEAD check inside PageWaiters(): ext4_finish_bio() calling
end_page_writeback() calling wake_up_page() on tail of a shmem huge page,
no longer an ext4 page at all.
The problem is that PageWriteback is not accompanied by a page reference
(as the NOTE at the end of test_clear_page_writeback() acknowledges): as
soon as TestClearPageWriteback has been done, that page could be removed
from page cache, freed, and reused for something else by the time that
wake_up_page() is reached.
https://lore.kernel.org/linux-mm/20200827122019.GC14765@casper.infradead.org/
Matthew Wilcox suggested avoiding or weakening the PageWaiters() tail
check; but I'm paranoid about even looking at an unreferenced struct page,
lest its memory might itself have already been reused or hotremoved (and
wake_up_page_bit() may modify that memory with its ClearPageWaiters()).
Then on crashing a second time, realized there's a stronger reason against
that approach. If my testing just occasionally crashes on that check,
when the page is reused for part of a compound page, wouldn't it be much
more common for the page to get reused as an order-0 page before reaching
wake_up_page()? And on rare occasions, might that reused page already be
marked PageWriteback by its new user, and already be waited upon? What
would that look like?
It would look like BUG_ON(PageWriteback) after wait_on_page_writeback()
in write_cache_pages() (though I have never seen that crash myself).
Matthew Wilcox explaining this to himself:
"page is allocated, added to page cache, dirtied, writeback starts,
--- thread A ---
filesystem calls end_page_writeback()
test_clear_page_writeback()
--- context switch to thread B ---
truncate_inode_pages_range() finds the page, it doesn't have writeback set,
we delete it from the page cache. Page gets reallocated, dirtied, writeback
starts again. Then we call write_cache_pages(), see
PageWriteback() set, call wait_on_page_writeback()
--- context switch back to thread A ---
wake_up_page(page, PG_writeback);
... thread B is woken, but because the wakeup was for the old use of
the page, PageWriteback is still set.
Devious"
And prior to 2a9127fcf2 ("mm: rewrite wait_on_page_bit_common() logic")
this would have been much less likely: before that, wake_page_function()'s
non-exclusive case would stop walking and not wake if it found Writeback
already set again; whereas now the non-exclusive case proceeds to wake.
I have not thought of a fix that does not add a little overhead: the
simplest fix is for end_page_writeback() to get_page() before calling
test_clear_page_writeback(), then put_page() after wake_up_page().
Was there a chance of missed wakeups before, since a page freed before
reaching wake_up_page() would have PageWaiters cleared? I think not,
because each waiter does hold a reference on the page. This bug comes
when the old use of the page, the one we do TestClearPageWriteback on,
had *no* waiters, so no additional page reference beyond the page cache
(and whoever racily freed it). The reuse of the page has a waiter
holding a reference, and its own PageWriteback set; but the belated
wake_up_page() has woken the reuse to hit that BUG_ON(PageWriteback).
Reported-by: syzbot+3622cea378100f45d59f@syzkaller.appspotmail.com
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 2a9127fcf2 ("mm: rewrite wait_on_page_bit_common() logic")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GPIOs - as returned by of_get_named_gpio() and used by the gpiolib - are
signed integers, where negative number indicates error. The return
value of of_get_named_gpio() should not be assigned to an unsigned int
because in case of !CONFIG_GPIOLIB such number would be a valid GPIO.
Fixes: c04c674fad ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201123162351.209100-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpaa2 driver depends on devlink, so it should select
NET_DEVLINK in order to fix compile errors, such as:
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.o: in function `dpaa2_eth_rx_err':
dpaa2-eth.c:(.text+0x3cec): undefined reference to `devlink_trap_report'
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth-devlink.o: in function `dpaa2_eth_dl_info_get':
dpaa2-eth-devlink.c:(.text+0x160): undefined reference to `devlink_info_driver_name_put'
Fixes: ceeb03ad8e ("dpaa2-eth: add basic devlink support")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201123163553.1666476-1-ciorneiioana@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a BPF program is used to select between a type of TCP congestion
control algorithm that uses either ECN or not there is a case where the
synack for the frame was coming up without the ECT0 bit set. A bit of
research found that this was due to the final socket being configured to
dctcp while the listener socket was staying in cubic.
To reproduce it all that is needed is to monitor TCP traffic while running
the sample bpf program "samples/bpf/tcp_cong_kern.c". What is observed,
assuming tcp_dctcp module is loaded or compiled in and the traffic matches
the rules in the sample file, is that for all frames with the exception of
the synack the ECT0 bit is set.
To address that it is necessary to make one additional call to
tcp_bpf_ca_needs_ecn using the request socket and then use the output of
that to set the ECT0 bit for the tos/tclass of the packet.
Fixes: 91b5b21c7c ("bpf: Add support for changing congestion control")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/160593039663.2604.1374502006916871573.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.
Reload stats structure before this fix:
"stats": {
"reload": {
"driver_reinit": 2,
"fw_activate": 1,
"fw_activate_no_reset": 0
}
}
After this fix:
"stats": {
"reload": {
"driver_reinit": {
"unspecified": 2
},
"fw_activate": {
"unspecified": 1,
"no_reset": 0
}
}
Fixes: a254c26426 ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing IPv6 forwarding, there is an expectation that SKBs
will have some headroom. When forwarding a packet from the aquantia
driver, this does not always happen, triggering a kernel warning.
aq_ring.c has this code (edited slightly for brevity):
if (buff->is_eop && buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) {
skb = build_skb(aq_buf_vaddr(&buff->rxdata), AQ_CFG_RX_FRAME_MAX);
} else {
skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE);
There is a significant difference between the SKB produced by these
2 code paths. When napi_alloc_skb creates an SKB, there is a certain
amount of headroom reserved. However, this is not done in the
build_skb codepath.
As the hardware buffer that build_skb is built around does not
handle the presence of the SKB header, this code path is being
removed and the napi_alloc_skb path will always be used. This code
path does have to copy the packet header into the SKB, but it adds
the packet data as a frag.
Fixes: 018423e90b ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Lincoln Ramsay <lincoln.ramsay@opengear.com>
Link: https://lore.kernel.org/r/MWHPR1001MB23184F3EAFA413E0D1910EC9E8FC0@MWHPR1001MB2318.namprd10.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Since preempt-to-busy, we may unsubmit a request while it is still on
the HW and completes asynchronously. That means it may be retired and in
the process destroy the virtual engine (as the user has closed their
context), but that engine may still be holding onto the unsubmitted
compelted request. Therefore we need to potentially cleanup the old
request on destroying the virtual engine. We also have to keep the
virtual_engine alive until after the sibling's execlists_dequeue() have
finished peeking into the virtual engines, for which we serialise with
RCU.
v2: Be paranoid and flush the tasklet as well.
v3: And flush the tasklet before the engines, as the tasklet may
re-attach an rb_node after our removal from the siblings.
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-4-chris@chris-wilson.co.uk
(cherry picked from commit 46eecfccb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We currently want to keep the interrupt enabled until the interrupt after
which we have no more work to do. This heuristic was broken by us
kicking the irq-work on adding a completed request without attaching a
signaler -- hence it appearing to the irq-worker that an interrupt had
fired when we were idle.
Fixes: 2854d86632 ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-3-chris@chris-wilson.co.uk
(cherry picked from commit 3aef910d26)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
fix the null pointer issue when runtime pm is triggered.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Move the register slow register write and readback from out of the
critical path for execlists submission and delay it until the following
worker, shaving off around 200us. Note that the same signal_irq_work() is
allowed to run concurrently on each CPU (but it will only be queued once,
once running though it can be requeued and reexecuted) so we have to
remember to lock the global interactions as we cannot rely on the
signal_irq_work() itself providing the serialisation (in constrast to a
tasklet).
By pushing the arm/disarm into the central signaling worker we can close
the race for disarming the interrupt (and dropping its associated
GT wakeref) on parking the engine. If we loose the race, that GT wakeref
may be held indefinitely, preventing the machine from sleeping while
the GPU is ostensibly idle.
v2: Move the self-arming parking of the signal_irq_work to a flush of
the irq-work from intel_breadcrumbs_park().
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2271
Fixes: e23005604b ("drm/i915/gt: Hold context/request reference while breadcrumbs are active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-1-chris@chris-wilson.co.uk
(cherry picked from commit 9d5612ca16)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 059a0beb48)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
cpuidle->enter() callbacks should not call into tracing because RCU
has already been disabled. Instead of doing the broadcast thing
itself, simply advertise to the cpuidle core that those states stop
the timer.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20201123143510.GR3021@hirez.programming.kicks-ass.net
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
iov_iter::type is a bitmask that also keeps direction etc., so it
shouldn't be directly compared against ITER_*. Use proper helper.
Fixes: ff6165b2d7 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create():
[ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3
[ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 59.603673] Call Trace:
[ 59.604286] dump_stack+0x107/0x163
[ 59.605237] ubsan_epilogue+0xb/0x5a
[ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e
[ 59.607335] ? lock_downgrade+0x6c0/0x6c0
[ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.609166] io_uring_create.cold+0x99/0x149
[ 59.610114] io_uring_setup+0xd6/0x140
[ 59.610975] ? io_uring_create+0x2510/0x2510
[ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400
[ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80
[ 59.614038] ? trace_hardirqs_on+0x5b/0x180
[ 59.615056] do_syscall_64+0x2d/0x40
[ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 59.617007] RIP: 0033:0x7f2bb8a0b239
This is caused by roundup_pow_of_two() if the input entries larger
enough, e.g. 2^32-1. For sq_entries, it will check first and we allow
at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do
round up first, that may overflow and truncate it to 0, which is not
the expected behavior. So check the cq size first and then do round up.
Fixes: 88ec3211e4 ("io_uring: round-up cq size before comparing with rounded sq size")
Reported-by: Abaci Fuzz <abaci@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If set active without increase the usage count of pm, the dont use
autosuspend function will call the suspend callback to close the two
clocks of spi because the usage count is reduced to -1.
This will cause the warning dump below when the defer-probe occurs.
[ 129.379701] ecspi2_root_clk already disabled
[ 129.384005] WARNING: CPU: 1 PID: 33 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
So add the get noresume function before set active.
Fixes: 43b6bf406c spi: imx: fix runtime pm support for !CONFIG_PM
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20201124085247.18025-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently array of fix length PM_API_MAX is used to cache
the pm_api version (valid or invalid). However ATF based
PM APIs values are much higher then PM_API_MAX.
So to include ATF based PM APIs also, use hash-table to
store the pm_api version status.
Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Fixes: f3217d6f2f ("firmware: xilinx: fix out-of-bounds access")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
On resource group creation via a mkdir an extra kernfs_node reference is
obtained by kernfs_get() to ensure that the rdtgroup structure remains
accessible for the rdtgroup_kn_unlock() calls where it is removed on
deletion. Currently the extra kernfs_node reference count is only
dropped by kernfs_put() in rdtgroup_kn_unlock() while the rdtgroup
structure is removed in a few other locations that lack the matching
reference drop.
In call paths of rmdir and umount, when a control group is removed,
kernfs_remove() is called to remove the whole kernfs nodes tree of the
control group (including the kernfs nodes trees of all child monitoring
groups), and then rdtgroup structure is freed by kfree(). The rdtgroup
structures of all child monitoring groups under the control group are
freed by kfree() in free_all_child_rdtgrp().
Before calling kfree() to free the rdtgroup structures, the kernfs node
of the control group itself as well as the kernfs nodes of all child
monitoring groups still take the extra references which will never be
dropped to 0 and the kernfs nodes will never be freed. It leads to
reference count leak and kernfs_node_cache memory leak.
For example, reference count leak is observed in these two cases:
(1) mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/c1
mkdir /sys/fs/resctrl/c1/mon_groups/m1
umount /sys/fs/resctrl
(2) mkdir /sys/fs/resctrl/c1
mkdir /sys/fs/resctrl/c1/mon_groups/m1
rmdir /sys/fs/resctrl/c1
The same reference count leak issue also exists in the error exit paths
of mkdir in mkdir_rdt_prepare() and rdtgroup_mkdir_ctrl_mon().
Fix this issue by following changes to make sure the extra kernfs_node
reference on rdtgroup is dropped before freeing the rdtgroup structure.
(1) Introduce rdtgroup removal helper rdtgroup_remove() to wrap up
kernfs_put() and kfree().
(2) Call rdtgroup_remove() in rdtgroup removal path where the rdtgroup
structure is about to be freed by kfree().
(3) Call rdtgroup_remove() or kernfs_put() as appropriate in the error
exit paths of mkdir where an extra reference is taken by kernfs_get().
Fixes: f3cbeacaa0 ("x86/intel_rdt/cqm: Add rmdir support")
Fixes: e02737d5b8 ("x86/intel_rdt: Add tasks files")
Fixes: 60cf5e101f ("x86/intel_rdt: Add mkdir to resctrl file system")
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1604085088-31707-1-git-send-email-xiaochen.shen@intel.com
