Use proper kerneldoc to fix GCC warnings like:
drivers/memory/of_memory.c:30: warning: Function parameter or member 'dev' not described in 'of_get_min_tck'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Remove some unneeded blank lines, align indentation with open
parenthesis (or fix existing alignment).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use proper kerneldoc to fix GCC warnings like:
drivers/memory/omap-gpmc.c:299: warning: Function parameter or member 'cs' not described in 'gpmc_get_clk_period'
drivers/memory/omap-gpmc.c:432: warning: Excess function parameter 'ma' description in 'get_gpmc_timing_reg'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The drivers/memory directory with memory controller drivers, over the
last days grew in numbers but lacked any coordinated care. The generic
part (device tree helpers) were pulled in through various trees,
depending on driver needs.
The patchset is a first try to improve code quality of memory controller
drivers. Mostly these are non-intrusive fixes for GCC, checkpatch or
sparse warnings. This also fixes missing SPDX tags or improves generic
code quality (whitespace, const correctness).
Last commit appoints also Krzysztof Kozlowski as a maintainer.
-----BEGIN PGP SIGNATURE-----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=8N1k
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Memory controller drivers for v5.9
The drivers/memory directory with memory controller drivers, over the
last days grew in numbers but lacked any coordinated care. The generic
part (device tree helpers) were pulled in through various trees,
depending on driver needs.
The patchset is a first try to improve code quality of memory controller
drivers. Mostly these are non-intrusive fixes for GCC, checkpatch or
sparse warnings. This also fixes missing SPDX tags or improves generic
code quality (whitespace, const correctness).
Last commit appoints also Krzysztof Kozlowski as a maintainer.
* tag 'memory-controller-drv-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (22 commits)
MAINTAINERS: Add Krzysztof Kozlowski as maintainer of memory controllers
memory: samsung: exynos-srom: Describe the Kconfig entry
memory: Describe the MEMORY Kconfig entry
memory: da8xx-ddrctl: Remove unused 'node' variable
memory: fsl_ifc: Fix whitespace issues
memory: pl172: Add GPLv2 SPDX license header
memory: omap-gpmc: Fix whitespace issue
memory: omap-gpmc: Include <linux/sizes.h> for SZ_16M
memory: mtk-smi: Add argument to function pointer definition
memory: brcmstb_dpfe: Remove unneeded braces
memory: brcmstb_dpfe: Constify the contents of string
memory: ti-emif-pm: Fix cast to iomem pointer
memory: ti-aemif: Rename SS to SSTROBE to avoid name conflicts
memory: emif: Silence platform_get_irq() error in driver
memory: emif: Fix whitespace coding style violations
memory: emif: Put constant in comparison on the right side
memory: emif-asm-offsets: Add GPLv2 SPDX license header
memory: of: Remove unneeded extern from function declarations
memory: of: Correct indentation
memory: of: Remove __func__ in device related messages
...
Link: https://lore.kernel.org/r/20200724160314.8543-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The variable 'node' is not used. Remove it to silence compile warning:
drivers/memory/da8xx-ddrctl.c: In function 'da8xx_ddrctl_probe':
drivers/memory/da8xx-ddrctl.c:105:22: warning: variable 'node' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The driver uses SZ_16M which is defined in include/linux/sizes.h. On
ARM it was pulled by other headers but its inclusion is necessary for
compile testing on other architectures.
This fixes build error when compile testing on i386 architecture:
drivers/memory/omap-gpmc.c: In function ‘gpmc_cs_remap’:
drivers/memory/omap-gpmc.c:961:12: error: ‘SZ_16M’ undeclared (first use in this function)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Fix checkpatch warning:
WARNING: function definition argument 'struct device *' should also have an identifier name
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Single statement blocks don't need braces. Fixes checkpatch warning:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
The string itself can be made const for safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
SS conflicts with compile test build on i386:
drivers/memory/ti-aemif.c:40:0: warning: "SS" redefined
In file included from arch/x86/include/uapi/asm/ptrace.h:6:0,
from arch/x86/include/asm/ptrace.h:7,
from arch/x86/include/asm/math_emu.h:5,
from arch/x86/include/asm/processor.h:13,
from include/linux/mutex.h:19,
from include/linux/notifier.h:14,
from include/linux/clk.h:14,
from drivers/memory/ti-aemif.c:12:
arch/x86/include/uapi/asm/ptrace-abi.h:23:0: note: this is the location of the previous definition
#define SS 16
Use more descriptive name (SSTROBE) to avoid the conflict.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The platform_get_irq() already prints error message so there is no need
to do it again in the driver.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Make the code and printed messages slightly more readable. Fixes
checkpatch warnings:
WARNING: quoted string split across lines
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes checkpatch warning:
WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Function declarations in headers do not need to come with extern
keyword. Remove them to make the declaration slightly shorter.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Messages printed by generic of_memory code will still be using device
context so their location/meaning will be known. Printing __func__ is
not needed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Check for regmap_read() return code before using the read value in
following write in exynos5_switch_timing_regs(). Pass reading error
code to the callers.
This does not introduce proper error handling for such failed reads (and
obviously regmap_write() error is still ignored) because the driver
ignored this in all places. Therefor it only fixes reported issue while
matching current driver coding style:
drivers/memory/samsung/exynos5422-dmc.c: In function 'exynos5_switch_timing_regs':
>> drivers/memory/samsung/exynos5422-dmc.c:216:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Ensure that the driver will bind against the Tegra132 instantiation of
the external memory controller. While the two are roughly the same from
a capability perspective, they do require some incompatible changes to
the programming sequences and therefore need separate compatible
strings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit a127e690b0 ("memory: tegra: Add support for the Tegra194 memory
controller") and commit 4e04b88633 ("memory: tegra: Only include
support for enabled SoCs") incorrectly added the KCONFIG variables
CONFIG_ARCH_TEGRA186_SOC and CONFIG_ARCH_TEGRA194_SOC to the Tegra EMC
driver. These KCONFIG variables do not exist and prevent the EMC driver
from being probed on Tegra186 and Tegra194. These KCONFIG variable
names are simply missing one underscore and so fix this by adding the
necessary underscore to the variable names.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add smi-larb and smi-common nodes and config_port for MT6779.
changelog since v2:
Split basic nodes and config_port support from initial golden setting patch
Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578465691-30692-4-git-send-email-ming-fan.chen@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add the memory driver for Renesas RPC-IF which registers either SPI or
HyperFLash device depending on the contents of the device tree subnode.
It also provides the absract "back end" device APIs that can be used by
the "front end" SPI/MTD drivers to talk to the real hardware.
Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debugfs_create_dir() function never returns NULL and anyway the
correct behavior is to ignore errors in this situation. The
debugfs_create_file() will become a no-op if "emc->debugfs.root" is an
error pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The suspend/resume functions have no callers depending on
configuration, so they must be marked __maybe_unused to
avoid these harmless warnings:
drivers/memory/tegra/tegra186.c:1578:12: error: 'tegra186_mc_resume' defined but not used [-Werror=unused-function]
1578 | static int tegra186_mc_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~
drivers/memory/tegra/tegra186.c:1573:12: error: 'tegra186_mc_suspend' defined but not used [-Werror=unused-function]
1573 | static int tegra186_mc_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~
Fixes: 177602b006 ("memory: tegra: Add system sleep support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra EMC scaling support code is not a clock provider, but merely a
clock consumer, and thus does not need to include
<linux/clk-provider.h>.
Fixes: 0bf368c5b2cf ("memory: tegra: Add EMC scaling support code for Tegra210")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The call to tegra_bpmp_get() must be balanced by a call to
tegra_bpmp_put() in case of error, as already done in the remove
function.
Add an error handling path and corresponding goto.
Fixes: 52d15dd23f ("memory: tegra: Support DVFS on Tegra186 and later")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory clock-rate change could be running on a non-boot CPU, while the
boot CPU handles the EMC interrupt. This introduces an unnecessary latency
since boot CPU should handle the interrupt and then notify the sibling CPU
about clock-rate change completion. In some rare cases boot CPU could be
in uninterruptible state for a significant time (like in a case of KASAN +
NFS root), it could get to the point that completion timeouts before boot
CPU gets a chance to handle interrupt. The solution is to get rid of the
completion and replace it with interrupt-status polling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory clock-rate change could be running on a non-boot CPU, while the
boot CPU handles the EMC interrupt. This introduces an unnecessary latency
since boot CPU should handle the interrupt and then notify the sibling CPU
about clock-rate change completion. In some rare cases boot CPU could be
in uninterruptible state for a significant time (like in a case of KASAN +
NFS root), it could get to the point that completion timeouts before boot
CPU gets a chance to handle interrupt. The solution is to get rid of the
completion and replace it with interrupt-status polling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Derated timings are used to ensure that the memory chips keep operating
correctly at high temperatures. This adds code to support polling of the
chip operating state when high temperatures are measured on the chip and
change the refresh mode accordingly. Under very high temperatures, the
driver will switch to the derated tables to ensure proper operation of
the memory chips.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch includes the sequence for clock tuning and the dynamic
training mechanism for the clock above 800MHz.
And historically there have been different sequences to change the EMC
clock. The sequence to be used is specified in the EMC table.
However, for the currently supported upstreaming platform, only the most
recent sequence is used. So only support that in this patch.
Based on the work of Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is the initial patch for Tegra210 EMC frequency scaling. It has the
code to program various aspects of the EMC that are standardized, but it
does not yet include the specific programming sequence needed for clock
scaling.
The driver is designed to support LPDDR4 SDRAM. Devices that use LPDDR4
need to perform training of the RAM before it can be used. Firmware will
perform this training during early boot and pass a table of supported
frequencies to the kernel via device tree.
For the frequencies above 800 MHz, periodic retraining is needed to
compensate for changes in timing. This periodic training will have to be
performed until the frequency drops back to or below 800 MHz.
This driver provides helpers used during this runtime retraining that
will be used by the sequence specific code in a follow-up patch.
Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Replace the symbolic permissions with octals in order to make them
readable.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[arnd: This is a patch series from Serge Semin to add a few drivers
that don't have any other subsystem maintainer tree to go through,
so I'm picking them up through the soc tree, full series description
from the mailing list below]
Baikal-T1 SoC CPU is based on two MIPS Warrior P5600 cores. Their main
memory Non-Coherent IO interface is connected to the OCP2AXI bridge,
which in turn is then connected to the DW AMBA 3 AXI Interconnect (so
called Main Interconnect) with nine masters and four slaves ports. Main
Interconnect is responsible for the AXI-bus traffic arbitration (QoS)
and its routing from one component to another. In addition there is
a Errors Handler Block (EHB) accesible by means of the Baikal-T1 SoC
System Controller responsible to detect AXI protocol errors and device
not responding situations built on top the interconnect. Baikal-T1 AXI-bus
driver included in this patchset will be responsible for working with that
functionality, though currently it doesn't support QoS tuning. Instead
it's capable of detecting the error events, reporting an info about
them to the system log, injecting artificial errors to test the driver
functionality. Since AXI Interconnect doesn't provide a way to find
out which devices are connected to it, so its DT node is supposed to
be compatible with "simple-bus" driver, while sub-nodes shall represent
the masters attached to the bus.
One of the AXI Interconnect slaves is an AXI-APB bridge used to access the
Baikal-T1 SoC subsystems CSRs. MMIO request from CPU and DMAC masters are
routed there if they are detected to be within [0x08000000 0x1FFFFFFF]
range of the physical memory. In case if an attempted APB transaction
stays with no response for a pre-defined time it will be detected by
the APB-bus Errors Handler Block (EHB), which will raise an interrupt,
then the bus gets freed for a next operation. The APB-bus driver provides
the interrupt handler to detect the erroneous address, update an errors
counter and prints an error message about the faulty address. The counter
and the APB-bus operations timeout can be accessed via corresponding sysfs
nodes. A dedicated sysfs-node can be also used to artificially cause the
bus errors described above. Since APB-bus is a platform bus, it doesn't
provide a way to detect slave devices connected to it, so similarly to
the AXI-bus it's also supposed to be compatible with "simple-bus" driver.
Aside from PCIe/SATA/DDR/I2C/EHB/CPU/reboot specific settings the
Baikal-T1 System Controller provides a MIPS P5600 CM2 L2-cache tuning
block. It is responsible for the setting up the Tag/Data/WS L2-to-RAM
latencies. The last small patch in this patchset provides a driver and
DT-schema-based binding for the described device. So that the latencies
can be tuned up by means of dedicated DT properties and sysfs nodes.
This patchset is rebased and tested on the mainline Linux kernel
5.7-rc4.
Changelog v2 (AXI/APB bus):
- Assign dual GPL/BSD licenses to the bindings.
- Use single lined copyright headers in the bindings.
- Replace "additionalProperties: false" property with
"unevaluatedProperties: false" in the bindings.
- Don't use a multi-arg clock phandle reference in DT binding examples.
Thus remove includes from there.
- Fix some commit message and Kconfig help text spelling.
- Move drivers from soc to the bus subsystem.
- Convert a simple EHB drivers to the Baikal-T1 AXI and APB bus ones.
- Convert APB bus driver to using regmap MMIO API.
- Use syscon regmap to access the AXI-bus erroneous address.
- Add reset line support.
- Add Main Interconnect clock support to the AXI-bus driver.
- Remove probe-status info string printout.
- Discard of_match_ptr() macro utilization.
- Don't print error-message if no platform IRQ found. Just return an
error.
- Use generic FIELD_{GET,PREP} macros instead of handwritten ones in the
AXI-bus driver.
Changelog v2 (l2 driver):
- Fix some commit message and Kconfig help text spelling.
- Move the driver to the memory subsystem.
- Assign dual GPL/BSD license to the DT binding.
- Use single lined copyright header in the binding.
- Discard reg property and syscon compatible string.
- Move "allOf" restrictions to the root level of the properties.
- The DT node is supposed to be a child of the Baikal-T1 system
controller node. So regmap will be fetched from there.
- Use generic FIELD_{GET,PREP} macro.
- Remove probe-status info string printout.
- Since the driver depends on the OF config we can remove of_match_ptr()
macro utilization.
Changelog v3:
- Combine l2 and AXI/APB bus patches in a single patchset.
- Retrieve AXI-bus QoS registers by resource name "qos".
- Discard CONFIG_OF dependency since there is none at compile-time.
- Add syscon EHB registers range to the AXI-bus reg property as optional
entry.
- Fix invalid of_property_read_u32() return value test in the l2-ctl
driver.
- Get the reg property back into the l2-ctl DT bindings even though the
driver is using the parental syscon regmap.
- The l2-ctl DT schema will live separately from the system controller,
but the corresponding sub-node of the later DT schema will $ref this
one.
- Set non-default latencies in the l2-ctl DT example.
* baikal/drivers:
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
Link: https://lore.kernel.org/lkml/20200526130841.ap6qlxv7hqmabnh5@mobilestation/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Baikal-T1 SoC provides a way to tune the MIPS P5600 CM2 L2-cache
performance up. It can be done by changing the L2-RAM Data/Tag/WS
latencies in a dedicated register exposed by the system controller.
The driver added by this commit provides a dts properties-based and
sysfs-based interface for it. The device DT node is supposed to be a
child of Baikal-T1 System Controller node.
Link: https://lore.kernel.org/r/20200526125928.17096-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: soc@kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Speed-up a bit this IRQ processing as there is no need to protect
return value or printing.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Aligning of tFAW timing with standard was using wrong argument as
minimum acceptable value. This could lead to wrong timing if provided
timings and clock period do not match the standard.
Fixes: 6e7674c3c6 ("memory: Add DMC driver for Exynos5422")
Cc: <stable@vger.kernel.org>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 6b9acd9355 ("memory: tegra: Refashion EMC debugfs interface on Tegra124")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8cee32b400 ("memory: tegra: Implement EMC debugfs interface on Tegra30")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8209eefa3d ("memory: tegra: Implement EMC debugfs interface on Tegra20")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Various cleanup on the following drivers:
- Turris Mox rWTM firmware
- Moxtet bus
- Armada 37xx rWTM mailbox
- Marvell EBU Device Bus
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXhn9YQAKCRALBhiOFHI7
1eaRAJ49SHCftal9aCuOrcl2/w4OBmB3awCffwAbLS0fTC/2ynqOshjavVbzmes=
=JM34
-----END PGP SIGNATURE-----
Merge tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu into arm/drivers
mvebu drivers for 5.6 (part 1)
- Various cleanup on the following drivers:
- Turris Mox rWTM firmware
- Moxtet bus
- Armada 37xx rWTM mailbox
- Marvell EBU Device Bus
* tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu:
mailbox: armada-37xx-rwtm: convert to devm_platform_ioremap_resource
memory: mvebu-devbus: convert to devm_platform_ioremap_resource
bus: moxtet: declare moxtet_bus_type as static
firmware: turris-mox-rwtm: small white space cleanup
Link: https://lore.kernel.org/r/877e1x3nxc.fsf@FE-laptop
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds a couple of fixes for the Tegra30 EMC frequency scaling code
and adds support for EMC frequency scaling on Tegra186 and later.
-----BEGIN PGP SIGNATURE-----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=shap
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.6-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.6-rc1
This adds a couple of fixes for the Tegra30 EMC frequency scaling code
and adds support for EMC frequency scaling on Tegra186 and later.
* tag 'tegra-for-5.6-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
memory: tegra: Correct reset value of xusb_hostr
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
memory: tegra: Add system sleep support
memory: tegra: Extract memory client SID programming
memory: tegra: Add per-SoC data for Tegra186
memory: tegra: Rename tegra_mc to tegra186_mc on Tegra186
memory: tegra: Implement EMC debugfs interface on Tegra30
memory: tegra: Implement EMC debugfs interface on Tegra20
memory: tegra: Refashion EMC debugfs interface on Tegra124
Link: https://lore.kernel.org/r/20200111003553.2411874-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The code waits for auto calibration to be finished and not to be disabled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously there was a problem where a late handshake handling caused
a memory corruption, this problem was resolved by issuing calibration
command right after changing the timing, but looks like the solution
wasn't entirely correct since calibration interval could be disabled as
well. Now programming sequence is completed immediately after receiving
handshake from CaR, without potentially long delays and in accordance to
the TRM's programming guide.
Secondly, the TRM's programming guide suggests to flush EMC writes by
reading any *MC* register before doing CaR changes. This is also addressed
now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current code doesn't prevent race conditions of suspend/resume vs CCF.
Let's take exclusive control over the EMC clock during suspend in a way
that is free from race conditions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to Tegra X1 (Tegra210) TRM, the reset value of xusb_hostr
field (bit [7:0]) should be 0x7a. So this patch simply corrects it.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory and external memory controllers on Tegra194 are very similar
to their predecessors from Tegra186. Add the necessary SoC-specific data
to support the newer versions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory client tables can be fairly large and they can easily be
omitted if support for the corresponding SoC is not enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a Tegra186 (and later) EMC driver that reads the EMC DVFS tables
from BPMP and uses the EMC clock to change the external memory clock.
This currently only provides a debugfs interface to show the available
frequencies and set lower and upper limits of the allowed range. This
can be used for testing the various frequencies. The goal is to
eventually integrate this with the interconnect framework so that the
EMC frequency can be scaled based on demand from memory clients.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add system suspend/resume support for the memory controller found on
Tegra186 and later. This is required so that the SID registers can be
reprogrammed after their content was lost during system sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move programming of the memory client to SID mapping into a separate
function so that it can be reused from multiple call sites.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of hard-coding the memory client table, use per-SoC data in
preparation for adding support for other SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra20, Tegra124,
Tegra186 and Tegra194. Implement the same interface on Tegra30 to enable
testing of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra124, Tegra186
and Tegra194. Implement the same interface on Tegra20 to enable testing
of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current debugfs interface is only partially useful. While it allows
listing supported frequencies and testing individual clock rates, it is
limited in that it can't be used to restrict the range of frequencies
that the driver is allowed to set. This is something we may want to use
to test adaptive scaling once that's implemented.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.
-----BEGIN PGP SIGNATURE-----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=zun7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
memory: tegra: Fixes for v5.5-rc1
This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.
* tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Fix panic on suspend
Link: https://lore.kernel.org/r/20191204130753.3614278-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----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=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Trying to suspend driver results in a crash if timings aren't available in
device-tree.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: e34212c75a ("memory: tegra: Introduce Tegra30 EMC driver")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This contains a couple of fixes and adds support for EMC frequency
scaling on Tegra30.
-----BEGIN PGP SIGNATURE-----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=DLzB
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
memory: tegra: Changes for v5.5-rc1
This contains a couple of fixes and adds support for EMC frequency
scaling on Tegra30.
* tag 'tegra-for-5.5-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
clk: tegra: Add Tegra20/30 EMC clock implementation
Link: https://lore.kernel.org/r/20191111143836.4027200-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The Memory Controller registers definition is sparse and duplicated,
let's consolidate everything into a common place for consistency.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Timing control debug features should be disabled at a boot time, but you
never now and hence it's better to disable them explicitly because some of
those features are crucial for the driver to do a proper thing.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Introduce driver for the External Memory Controller (EMC) found on Tegra30
chips, it controls the external DRAM on the board. The purpose of this
driver is to program memory timing for external memory on the EMC clock
rate change.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Contrary to its wait_for_completion_timeout_interruptible() sibling, the
wait_for_completion_timeout() function does not return an error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Turned out that it could take over a millisecond under some circumstances,
like running on a very low CPU/memory frequency. TRM says that handshake
happens when there is a "safe" moment, but not explains exactly what that
moment is. Apparently at least memory should be idling and thus the low
frequency should be a reasonable cause for a longer handshake delay.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During boot print how many memory timings got the driver and what's the
RAM code. This is a very useful information when something is wrong with
boards memory timing.
Suggested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The driver expects certain debug features to be disabled in order to
work properly. Let's disable them explicitly for consistency and to not
rely on a boot state.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The register polling code was gone, but the included header change was
missed. Fix it up for consistency.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now Tegra20 and Tegra30 EMC drivers should provide clock-rounding
functionality using the new Tegra clock driver API.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory frequency scaling will be managed by tegra20-devfreq driver
and PM QoS once all the prerequisite patches will get upstreamed.
The parent clock is now managed by the clock driver and we also should
assume that PLLM rate can't be changed on some devices (Galaxy Tab 10.1
for example). Altogether there is no point in touching of clock's rate
from the EMC driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All of the devices making up the Tegra DRM device want to share a single
IOMMU domain. Put them into a single group to allow them to do that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory controller on Tegra124 and later supports 34 or more address
bits. Advertise that by setting the DMA mask based on the number of the
address bits.
Signed-off-by: Thierry Reding <treding@nvidia.com>
- a new driver exposing the serial number registers through nvmem
- a few documentation and definition changes
-----BEGIN PGP SIGNATURE-----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=BAax
-----END PGP SIGNATURE-----
Merge tag 'at91-5.5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers
AT91 drivers for 5.5
- a new driver exposing the serial number registers through nvmem
- a few documentation and definition changes
* tag 'at91-5.5-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
ARM: at91: Documentation: update the sama5d3 and armv7m datasheets
Link: https://lore.kernel.org/r/20191107221644.GA201884@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
The total number of EBI CS lines is described by the EBI controller
and not by the Matrix. Move the definition for the number of CS
inside EBI driver.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20190906150632.19039-1-tudor.ambarus@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
* 'for_5.5/driver-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'
soc: ti: omap-prm: fix return value check in omap_prm_probe()
soc: ti: omap-prm: add omap5 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: add initial PRM driver with reset control support
dt-bindings: omap: add new binding for PRM instances
Link: https://lore.kernel.org/r/1572372856-20598-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
drivers/memory/emif.c:1616:9: warning:
variable cs1_used set but not used [-Wunused-but-set-variable]
drivers/memory/emif.c:1624:36: warning:
variable custom_configs set but not used [-Wunused-but-set-variable]
They are never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
updates for 5.5, please pull the following:
- Markus updates the DPFE driver so as to support deferring the firmware
loading process until the first sysfs attribute is accessed, in the
process he does a bunch of cleanups and minor fixes
- Florian adds support for the DPFE on 7211 which uses a "new style" API
v2 and makes necessary changes along the way
-----BEGIN PGP SIGNATURE-----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=rU3w
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
updates for 5.5, please pull the following:
- Markus updates the DPFE driver so as to support deferring the firmware
loading process until the first sysfs attribute is accessed, in the
process he does a bunch of cleanups and minor fixes
- Florian adds support for the DPFE on 7211 which uses a "new style" API
v2 and makes necessary changes along the way
* tag 'arm-soc/for-5.5/drivers' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: Fixup API version/commands for 7211
memory: brcmstb: dpfe: Compute checksum at __send_command() time
memory: brcmstb: dpfe: support for deferred firmware download
memory: brcmstb: dpfe: pass *priv as argument to brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: move init_data into brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: add locking around DCPU enable/disable
memory: brcmstb: dpfe: initialize priv->dev
memory: brcmstb: dpfe: rename struct private_data
Link: https://lore.kernel.org/r/20191023212814.30622-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
7211 uses a newer version of API v2 which is half way between what was
defined as API v3 and what used to be called API v2 but was used with
DPFE firmwares with major versions 1.x.x.x. Starting with **the new**
API v2, we are no longer getting loadable firmware images, so the
capability to load it is removed (like v3).
To avoid spreading more confusion, map 7268/7271/7278 to the old DPFE
API version 2, 7211 to the new API v2 and introduce the specific
commands for that, and leave newer versions to map to API v3.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Instead of pre-computing the checksum, do it at the time we send the
command, this reduces the possibility of introducing errors as well as
limits the amount of code necessary while adding new commands and/or new
API versions. The MSG_CHKSUM enumeration value is no longer necessary
and is removed.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
We add support for deferred downloading of the DPFE firmware. It may be
necessary to do this if the root file system containing the firmware
image is not yet available at the time the driver's probe function is
being called.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
