This patch allows flock glocks to use a non-blocking dequeue rather
than dq_wait. It also reverts the previous patch I had posted regarding
dq_wait. The reverted patch isn't necessarily a bad idea, but I decided
this might avoid unforeseen side effects, and was therefore safer.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Normally GFP_KERNEL is ok here, but there is now a rarely used code path
relating to deallocation of unlinked inodes (in certain corner cases)
which if hit at times of memory shortage can cause recursion while
trying to free memory.
One solution would be to try and move the gfs2_glock_get() call so
that it is no longer called while another glock is held, but that
doesn't look at all easy, so GFP_NOFS is the best solution for the
time being.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We must not leave items on the LRU list with GLF_LOCK set, since
they can be removed if the glock is brought back into use, which
may then potentially result in a hang, waiting for GLF_LOCK to
clear.
It doesn't happen very often, since it requires a glock that has
not been used for a long time to be brought back into use at the
same moment that the shrinker is part way through disposing of
glocks.
The fix is to set GLF_LOCK at a later time, when we already know
that the other locks can be obtained. Also, we now only release
the lru_lock in case a resched is needed, rather than on every
iteration.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function gfs2_glock_dq_wait is supposed to dequeue a glock and then
wait for the lock to be demoted. The problem is, if this is a shared
lock, its demote will depend on the other holders, which means you
might end up waiting forever because the other process is blocked.
This problem is especially apparent when dealing with nested flocks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The i.MX6 reference manual doesn't make a clear distinction
between the fixed clock divider and the enable gate for the
pcie and sata reference clocks. This lead to the lvds mux
inputs in the imx6q clk driver to be parented from the
ref clock (which is the divider) instead of the actual gate,
which in turn prevents the upstream clock to actually be
enabled when lvds clk out is active.
This fixes a hard machine hang regression in kernel 3.16 for
boards where only pcie is active but no sata, as with this
kernel version the imx6-pcie driver is no longer enabling
the upstream clock directly but only lvds clk out.
Reported-by: Arne Ruhnau <arne.ruhnau@target-sg.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Arne Ruhnau <arne.ruhnau@target-sg.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
In commit a21b0b354d ('perf: Introduce a flag to enable
close-on-exec in perf_event_open()'), flag PERF_FLAG_FD_CLOEXEC
was added to perf_event_open(2) syscall to allows userspace
to atomically enable close-on-exec behavor when creating
the file descriptor.
This patch makes perf tools use the new flag if supported
by the kernel, so that the event file descriptors got
automatically closed if perf tool exec a sub-command.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/1404160127-7475-1-git-send-email-ydroneaud@opteya.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
On ia64 and ppc64, function pointers do not point to the
entry address of the function, but to the address of a
function descriptor (which contains the entry address and misc
data).
Since the kprobes code passes the function pointer stored
by NOKPROBE_SYMBOL() to kallsyms_lookup_size_offset() for
initalizing its blacklist, it fails and reports many errors,
such as:
Failed to find blacklist 0001013168300000
Failed to find blacklist 0001013000f0a000
[...]
To fix this bug, use arch_deref_entry_point() to get the
function entry address for kallsyms_lookup_size_offset()
instead of the raw function pointer.
Suzuki also pointed out that blacklist entries should also
be updated as well.
Reported-by: Tony Luck <tony.luck@gmail.com>
Fixed-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (for powerpc)
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: sparse@chrisli.org
Cc: Paul Mackerras <paulus@samba.org>
Cc: akataria@vmware.com
Cc: anil.s.keshavamurthy@intel.com
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: rdunlap@infradead.org
Cc: dl9pf@gmx.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-ia64@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20140717114411.13401.2632.stgit@kbuild-fedora.novalocal
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
o Support S/390 in 'perf kvm stat' (Alexander Yarygin)
Developer Stuff:
o Various fixes and prep work related to supporting Intel PT (Adrian Hunter)
o Introduce multiple debug variables control (Jiri Olsa)
o Add callchain and additional sample information for python scripts (Joseph Schuchart)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJTx/TLAAoJENZQFvNTUqpAlacQALJ1cHV+rGEYmJ2O+HUqGqXv
PHK2yxMlGziIr/YeG2cWg4eiEQvARCg9cHeUJlYl2xLR65dDD8RGsLybiU7mwnWL
WLi8X0gM3FJfrG3TjJ+3Tn3S2T5LzhXU7LnlekMsbhcqdQKS0H47mw+XpiiuNtDw
tuRRtb+O16wVsGC4iB0t4Ank59uuyKcUCqzg4H5MLcEkmaW3upn4SmGaX04Lvv/I
jqp3xnaYnvRoH86wypmuyF1dJ5nEGa5HTGEoa/xC2xjugCqGRELXt6QyCrP2O8RE
RUAy71HrDkBwAt2nroxjN/fO8uvMQWfgHVLTlfkViO8ju9oZJaQi1uQLPoCk4c8x
TWY3peCmRFJKV9RblvNtLGH/HVznhIu6AQDe6HgDzq5vv7Pktw8a2FYgN7TU5YbS
aRBeqJkMLmlGgkaPe2WpJRzK2AxbbUocQ9ilhrw15dCLS6h7IS6C2LwsuOxuYE5Z
aGVHkB627e7aEFl6ifOe4PgvPxr5FFNeyY4RmtNeQlTdONN78uFYDBKX35V73kX2
OYnIsnb6Bh4G4mLtGVworhi7LzqPRHy3E4oRSn60aVW/ObGurAfrtWmr3IG1wd2r
z3S2FJpF+6xEKyubaFWIHoAIPrI5RAHtvIJrdsUTsR7G6a8R42M+o1fvr4+NdAQx
JPTLL4oe3up+VwqWVoAk
=Z5AO
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
o Support S/390 in 'perf kvm stat' (Alexander Yarygin)
Developer Stuff:
o Various fixes and prep work related to supporting Intel PT (Adrian Hunter)
o Introduce multiple debug variables control (Jiri Olsa)
o Add callchain and additional sample information for python scripts (Joseph Schuchart)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should schedule the 5s "timer work" before starting the data transfer,
otherwise, the data transfer code may finish so fast on another
virtual cpu that when the code(fcopy_write()) trying to cancel the 5s
"timer work" can occasionally fail because the "timer work" may haven't
been scheduled yet and as a result the fcopy process will be aborted
wrongly by fcopy_work_func() in 5s.
Thank Liz Zhang <lizzha@microsoft.com> for the initial investigation
on the bug.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=1118123
Tested-by: Liz Zhang <lizzha@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pm-sleep:
PM / sleep: fix freeze_ops NULL pointer dereferences
PM / sleep: Fix request_firmware() error at resume
* pm-cpufreq:
cpufreq: make table sentinel macros unsigned to match use
cpufreq: move policy kobj to policy->cpu at resume
cpufreq: cpu0: OPPs can be populated at runtime
cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
cpufreq: imx6q: Select PM_OPP
cpufreq: sa1110: set memory type for h3600
Commit 5eeaf1f189 (cpufreq: Fix build error on some platforms that
use cpufreq_for_each_*) moved function cpufreq_next_valid() to a public
header. Warnings are now generated when objects including that header
are built with -Wsign-compare (as an out-of-tree module might be):
.../include/linux/cpufreq.h: In function ‘cpufreq_next_valid’:
.../include/linux/cpufreq.h:519:27: warning: comparison between signed
and unsigned integer expressions [-Wsign-compare]
while ((*pos)->frequency != CPUFREQ_TABLE_END)
^
.../include/linux/cpufreq.h:520:25: warning: comparison between signed
and unsigned integer expressions [-Wsign-compare]
if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID)
^
Constants CPUFREQ_ENTRY_INVALID and CPUFREQ_TABLE_END are signed, but
are used with unsigned member 'frequency' of cpufreq_frequency_table.
Update the macro definitions to be explicitly unsigned to match their
use.
This also corrects potentially wrong behavior of clk_rate_table_iter()
if unsigned long is wider than usigned int.
Fixes: 5eeaf1f189 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*)
Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller
[1022:7814], the second hotplugging will experience the USB 3.0 pen
drive is recognized as high-speed device. After bisecting the kernel,
I found the commit number 41e7e056cd
(USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing
some experiments, the bug can be fixed by avoiding executing the function
hub_usb3_port_disable(). Because the port status with [AMD] FCH USB
XHCI Controlleris [1022:7814] is already in RxDetect
(I tried printing out the port status before setting to Disabled state),
it's reasonable to check the port status before really executing
hub_usb3_port_disable().
Fixes: 41e7e056cd (USB: Allow USB 3.0 ports to be disabled.)
Signed-off-by: Gavin Guo <gavin.guo@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few more fixes for 3.16. The pageflipping fixes I dropped last week
have finally shaped up so this is mostly fixes for fallout from the
pageflipping code changes. Also fix a memory leak and a black screen
when restoring the backlight on console unblanking.
* 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Make classic pageflip completion path less racy.
drm/radeon: Add missing vblank_put in pageflip ioctl error path.
drm/radeon: Remove redundant fence unref in pageflip path.
drm/radeon: Complete page flip even if waiting on the BO fence fails
drm/radeon: Move pinning the BO back to radeon_crtc_page_flip()
drm/radeon: Prevent too early kms-pageflips triggered by vblank.
drm/radeon: set default bl level to something reasonable
drm/radeon: avoid leaking edid data
There are 2 methods for ZLP (zero-length packet) generation:
1) In software
2) Automatic generation by device controller
1) is implemented in UDC driver and it attaches ZLP to IN packet if
descriptor->size < wLength
2) can be enabled/disabled by setting ZLT bit in the QH
When gadget ffs is connected to ubuntu host, the host sends
get descriptor request and wLength in setup packet is 255 while the
size of descriptor which will be sent by gadget in IN packet is
64 byte. So the composite driver sets req->zero = 1.
In UDC driver following code will be executed then
if (hwreq->req.zero && hwreq->req.length
&& (hwreq->req.length % hwep->ep.maxpacket == 0))
add_td_to_list(hwep, hwreq, 0);
Case-A:
So in case of ubuntu host, UDC driver will attach a ZLP to the IN packet.
ubuntu host will request 255 byte in IN request, gadget will send 64 byte
with ZLP and host will come to know that there is no more data.
But hold on, by default ZLT=0 for endpoint 0 so hardware also tries to
automatically generate the ZLP which blocks enumeration for ~6 seconds due
to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING)
Case-B:
In case when gadget ffs is connected to Apple device, Apple device sends
setup packet with wLength=64. So descriptor->size = 64 and wLength=64
therefore req->zero = 0 and UDC driver will not attach any ZLP to the
IN packet. Apple device requests 64 bytes, gets 64 bytes and doesn't
further request for IN data. But ZLT=0 by default for endpoint 0 so
hardware tries to automatically generate the ZLP which blocks enumeration
for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any
requests (OUT/PING)
According to USB2.0 specs:
8.5.3.2 Variable-length Data Stage
A control pipe may have a variable-length data phase in which the
host requests more data than is contained in the specified data
structure. When all of the data structure is returned to the host,
the function should indicate that the Data stage is ended by
returning a packet that is shorter than the MaxPacketSize for the
pipe. If the data structure is an exact multiple of wMaxPacketSize
for the pipe, the function will return a zero-length packet to indicate
the end of the Data stage.
In Case-A mentioned above:
If we disable software ZLP generation & ZLT=0 for endpoint 0 OR if software
ZLP generation is not disabled but we set ZLT=1 for endpoint 0 then
enumeration doesn't block for 6 seconds.
In Case-B mentioned above:
If we disable software ZLP generation & ZLT=0 for endpoint then enumeration
still blocks due to ZLP automatically generated by hardware and host not needing
it. But if we keep software ZLP generation enabled but we set ZLT=1 for
endpoint 0 then enumeration doesn't block for 6 seconds.
So the proper solution for this issue seems to disable automatic ZLP generation
by hardware (i.e by setting ZLT=1 for endpoint 0) and let software (UDC driver)
handle the ZLP generation based on req->zero field.
Cc: stable@vger.kernel.org
Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huawei's usage of the subclass and protocol fields is not 100%
clear to us, but there appears to be a very strict system.
A device with the "shared" device ID 12d1:1506 and this NCM
function was recently reported (showing only default altsetting):
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 22
iInterface 8 CDC Network Control Model (NCM)
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 06 24 1a 00 01 1f
** UNRECOGNIZED: 0c 24 1b 00 01 00 04 10 14 dc 05 20
** UNRECOGNIZED: 0d 24 0f 0a 0f 00 00 00 ea 05 03 00 01
** UNRECOGNIZED: 05 24 06 01 01
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 9
Cc: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two device IDs found in an out-of-tree driver downloadable
from Netgear.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
If "newmtu * 2 + 4" is too large then it can cause an integer overflow
leading to memory corruption. Eric Dumazet suggests that 65534 is a
reasonable upper limit.
Btw, "newmtu" is not allowed to be a negative number because of the
check in dev_set_mtu(), so that's ok.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fixes console deadlock when resuming PV guests
- Fix regression hit when ballooning and resuming PV guests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTxt1pAAoJEFjIrFwIi8fJbGcH/RW88DhFw3wJrtyd68R2uY4R
BQVsUeXltzS7cRZ46ytStn+UveXOII9SI1kdU0yAPWbpzgKwXkXLTGUbL26vXmfq
ZpAGIVFBG+SrHuTDEYP/IhB2TI6ugTeHVK8+Mo+HfjEs99OJ+BAf4IlZ9cLUvrW8
l51HcFe7c9ueH7YculTAesUWZrdS6p5FBbTz0pwG8BvU5NxJ2EC+MktLEKZmV27Q
Y3CN///BhIN6YXhPA3Frykxs36m4gFJUPgXbEQFea79I67f+frBX/VdKNPeaMoaR
yb305PStdxwo6Ja8Qx/CrTl+y8vTtLP1cADRGSdLD3m1vI42PNF4Qjr1ruLbA34=
=ky5L
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fixes from Konrad Rzeszutek Wilk:
"Two fixes found during migration of PV guests. David would be the one
doing this pull but he is on vacation.
Fixes:
- fix console deadlock when resuming PV guests
- fix regression hit when ballooning and resuming PV guests"
* tag 'stable/for-linus-3.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: set ballooned out pages as invalid in p2m
xen/manage: fix potential deadlock when resuming the console
I was cleaning out my INBOX and found two fixes from zhangwei from
a year ago that were lost in my mail. These fix an inconsistency between
trace_puts() and the way trace_printk() works. The reason this is
important to fix is because when trace_printk() doesn't have any
arguments, it turns into a trace_puts(). Not being able to enable a
stack trace against trace_printk() because it does not have any arguments
is quite confusing. Also, the fix is rather trivial and low risk.
While porting some changes to PowerPC I discovered that it still has
the function graph tracer filter bug that if you also enable stack tracing
the function graph tracer filter is ignored. I fixed that up.
Finally, Martin Lau, fixed a bug that would cause readers of the
ftrace ring buffer to block forever even though it was suppose to be
NONBLOCK.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTxfAHAAoJEKQekfcNnQGueDkH/jQ/FgNPw+GbKuNpZwWqMQds
ivGM8yb6NgmlDQx60oBOL9TduKN2LCqW3HWDoyzduSozuLUxpRTPWtVThKo0Q9Fp
FPHWewdrX7DwWkyEqeG7FAAhjqPedgEZoDOwy7BArzJYpHcpex42trDY4BhjPrlM
ESA+/M+Xm1vGCJzcNSqNHYE/mF/tHptdM1mlLZ3g9ql49MiTbQxEMbHX7lih24sv
AzNP1SlisYN5CkX4hbRGhCYkZdmdVZt/xiyBAQRWCGFx+jsdJbMXDJnevDCdU9Mv
GNtKwqsi1/GeE5nvKxZyQKsDEE98Pd8LyQ0kDqKpAfTutqNE4mpWJkCxUqTmE4Q=
=aFqO
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few more fixes for ftrace infrastructure.
I was cleaning out my INBOX and found two fixes from zhangwei from a
year ago that were lost in my mail. These fix an inconsistency
between trace_puts() and the way trace_printk() works. The reason
this is important to fix is because when trace_printk() doesn't have
any arguments, it turns into a trace_puts(). Not being able to enable
a stack trace against trace_printk() because it does not have any
arguments is quite confusing. Also, the fix is rather trivial and low
risk.
While porting some changes to PowerPC I discovered that it still has
the function graph tracer filter bug that if you also enable stack
tracing the function graph tracer filter is ignored. I fixed that up.
Finally, Martin Lau, fixed a bug that would cause readers of the
ftrace ring buffer to block forever even though it was suppose to be
NONBLOCK"
This also includes the fix from an earlier pull request:
"Oleg Nesterov fixed a memory leak that happens if a user creates a
tracing instance, sets up a filter in an event, and then removes that
instance. The filter allocates memory that is never freed when the
instance is destroyed"
* tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Fix polling on trace_pipe
tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputs
tracing: Fix graph tracer with stack tracer on other archs
tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs
tracing: instance_rmdir() leaks ftrace_event_file->filter
It is possible to record a perf.data file on one architecture and
process it on another.
Consequently, TSC conversion functions need to be moved out of the arch
directory.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-40-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --debug option as a way to setup debug variables. Starting with
support for verbose, more will come.
It's possible to use it now with report command:
$ perf --debug verbose ...
$ perf --debug verbose=2 ...
I'll need this support to add separated debug variable for ordered
events change in order to separate debug output out of standard verbose
stream.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140717105500.GG516@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we can easily reuse current debug functions for another debug
variables other than verbose.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving pr_* debug macros to have it with in same object as debug
variables, becase we will change them to use verbose variable in next
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-3-git-send-email-jolsa@kernel.org
[ Add missing debug.h include in python scripting glue and in the libdw unwind lib ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And use verbose as an global object in following functions:
__map_groups__fprintf_maps
__map_groups__fprintf_removed_maps
map_groups__fprintf_maps
map_groups__fprintf
Also making map_groups__fprintf_maps static.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__machine__findnew_thread() creates a 'struct thread' but does not free
it on the error path. Fix it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405495184-20441-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It needs to be possible to call thread__delete() on a thread with no map
groups.
This is needed for a subsequent patch which deletes a thread on the
error path before map groups have been attached.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405495184-20441-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events like sched_switch do not provide a pid (tgid) which can result in
threads with an unknown pid. If the pid is later discovered, join the
map groups.
Note the thread's map groups should be empty because they are populated
by MMAP events which do provide the pid and tid.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405498033-23817-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to protect mmio flip programming by event lock as well.
Need to also first enable pflip irq, then mmio program,
otherwise a flip completion may get unnoticed in the vblank
of actual completion if the flip is programmed, but
radeon_flip_work_func gets preempted immediately after
mmio programming and before vblank. In that case the
vblank irq handler wouldn't run radeon_crtc_handle_vblank()
with the completion check routine, miss the completed flip,
and only notice one vblank after actual completion, causing
a false/delayed report of flip completion.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed anymore, as it is already unreffed within
radeon_flip_work_func() after its only use.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the DRM core and userspace will be confused about which BO the
CRTC is scanning out.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As well as enabling the vblank interrupt. These shouldn't take any
significant amount of time, but at least pinning the BO has actually been
seen to fail in practice before, in which case we need to let userspace
know about it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 3.16-rc1 we have this new failure:
When the userspace XOrg ddx schedules vblank events to
trigger deferred kms-pageflips, e.g., via the OML_sync_control
extension call glXSwapBuffersMscOML(), or if a glXSwapBuffers()
is called immediately after completion of a previous swapbuffers
call, e.g., in a tight rendering loop with minimal rendering,
it happens frequently that the pageflip ioctl() is executed
within the same vblank in which a previous kms-pageflip completed,
or - for deferred swaps - always one vblank earlier than requested
by the client app.
This causes premature pageflips and detection of failure by
the ddx, e.g., XOrg log warnings like...
"(WW) RADEON(1): radeon_dri2_flip_event_handler: Pageflip
completion event has impossible msc 201025 < target_msc 201026"
... and error/invalid return values of glXWaitForSbcOML() and
Intel_swap_events extension.
Reason is the new way in which kms-pageflips are programmed
since 3.16.
This commit changes the time window in which the hw can
execute pending programmed pageflips. Before, a pending flip
would get executed anywhere within the vblank interval. Now
a pending flip only gets executed at the leading edge of
vblank (start of front porch), making sure that a invocation
of the pageflip ioctl() within a given vblank interval will
only lead to pageflip completion in the following vblank.
Tested to death on a DCE-4 card.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the value in the scratch register is 0, set it to the
max level. This fixes an issue where the console fb blanking
code calls back into the backlight driver on unblank and then
sets the backlight level to 0 after the driver has already
set the mode and enabled the backlight.
bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=81382https://bugs.freedesktop.org/show_bug.cgi?id=70207
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
Cc: stable@vger.kernel.org
In some cases we fetch the edid in the detect() callback
in order to determine what sort of monitor is connected.
If that happens, don't fetch the edid again in the get_modes()
callback or we will leak the edid.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 3ab72f9156 "dt-bindings: add GIC-400 binding" added the
"arm,gic-400" compatible string, but the corresponding IRQCHIP_DECLARE
was never added to the gic driver.
Therefore add the missing irqchip declaration for it.
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Removed additional empty line and adapted commit message to mark it
as fixing an issue.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Fixes: 3ab72f9156 ("dt-bindings: add GIC-400 binding")
Cc: <stable@vger.kernel.org> # v3.14+
Link: https://lkml.kernel.org/r/2621565.f5eISveXXJ@diego
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
[linux-3.16-rc5/drivers/ata/pata_ep93xx.c:929]: (style) Checking if unsigned
variable 'irq' is less than zero.
Source code is
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
but
unsigned int irq;
$ fgrep platform_get_irq `find . -name \*.h -print`
./include/linux/platform_device.h:extern int platform_get_irq(struct
platform_device *, unsigned int);
Now using "int" type instead of "unsigned int" for "irq" variable.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80401
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This is only relevant to implementations with multiple clusters, where clusters
have separate clock lines but all CPUs within a cluster share it.
Consider a dual cluster platform with 2 cores per cluster. During suspend we
start hot unplugging CPUs in order 1 to 3. When CPU2 is removed, policy->kobj
would be moved to CPU3 and when CPU3 goes down we wouldn't free policy or its
kobj as we want to retain permissions/values/etc.
Now on resume, we will get CPU2 before CPU3 and will call __cpufreq_add_dev().
We will recover the old policy and update policy->cpu from 3 to 2 from
update_policy_cpu().
But the kobj is still tied to CPU3 and isn't moved to CPU2. We wouldn't create a
link for CPU2, but would try that for CPU3 while bringing it online. Which will
report errors as CPU3 already has kobj assigned to it.
This bug got introduced with commit 42f921a, which overlooked this scenario.
To fix this, lets move kobj to the new policy->cpu while bringing first CPU of a
cluster back. Also do a WARN_ON() if kobject_move failed, as we would reach here
only for the first CPU of a non-boot cluster. And we can't recover from this
situation, if kobject_move() fails.
Fixes: 42f921a6f1 (cpufreq: remove sysfs files for CPUs which failed to come back after resume)
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Reported-and-tested-by: Bu Yitian <ybu@qti.qualcomm.com>
Reported-by: Saravana Kannan <skannan@codeaurora.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa@mit.edu>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 568f194e8b ("net: ppp: use
sk_unattached_filter api") inadvertently changed the logic when setting
PPP pass and active filters. This applies to both the generic PPP subsystem
implemented by drivers/net/ppp/ppp_generic.c and the ISDN PPP subsystem
implemented by drivers/isdn/i4l/isdn_ppp.c. The original code in ppp_ioctl()
(or isdn_ppp_ioctl(), resp.) handling PPPIOCSPASS and PPPIOCSACTIVE allowed to
remove a pass/active filter previously set by using a filter of length zero.
However, with the new code this is not possible anymore as this case is not
explicitly checked for, which leads to passing NULL as a filter to
sk_unattached_filter_create(). This results in returning EINVAL to the caller.
Additionally, the variables ppp->pass_filter and ppp->active_filter (or
is->pass_filter and is->active_filter, resp.) are not reset to NULL, although
the filters they point to may have been destroyed by
sk_unattached_filter_destroy(), so in this EINVAL case dangling pointers are
left behind (provided the pointers were previously non-NULL).
This patch corrects both problems by checking whether the filter passed is
empty or non-empty, and prevents sk_unattached_filter_create() from being
called in the first case. Moreover, the pointers are always reset to NULL
as soon as sk_unattached_filter_destroy() returns.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a regression introduced by commit 35f6f45 ("net/mlx4_en: Don't use
irq_affinity_notifier to track changes in IRQ affinity map").
When core is started in legacy EQ's (number of IRQ's < rx rings), cq->irq_desc
was NULL. This caused a kernel crash under heavy traffic - when having more
than rx NAPI budget completions.
Fixed to have it set for both EQ modes.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit f360d88a2e, we advertise blocking multicast loopback to both
kernel and userspace consumers, but don't allow kernel consumers (e.g IPoIB)
to use it with their UD QPs. Fix that.
Fixes: f360d88a2e ("IB/mlx5: Add block multicast loopback support")
Reported-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Nothing cleans up the objects created by
vnet_new(), they are completely leaked.
vnet_exit(), after doing the vio_unregister_driver() to clean
up ports, should call a helper function that iterates over vnet_list
and cleans up those objects. This includes unregister_netdevice()
as well as free_netdev().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Karl Volz <karl.volz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ethernet port on my ASUS A88X Pro mainboard stopped working
several times a day, with messages like these in dmesg:
AMD-Vi: Event logged [IO_PAGE_FAULT device=05:00.0 domain=0x001e address=0x0000000000003000 flags=0x0050]
Searching the web for these messages led me to similar reports about
different hardware supported by r8169, and eventually to commits
3ced8c955e ('r8169: enforce RX_MULTI_EN
for the 8168f.') and eb2dc35d99 ('r8169:
RxConfig hack for the 8168evl'). So I tried this change, and it fixes
the problem for me.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Temperature limit registers are signed. Limits therefore need
to be clamped to (-128, 127) degrees C and not to (0, 255)
degrees C.
Without this fix, writing a limit of 128 degrees C sets the
actual limit to -128 degrees C.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Pablo Neira Ayuso says:
====================
Netfilter/nf_tables fixes
The following patchset contains nf_tables fixes, they are:
1) Fix wrong transaction handling when the table flags are not
modified.
2) Fix missing rcu read_lock section in the netlink dump path, which
is not protected by the nfnl_lock.
3) Set NLM_F_DUMP_INTR in the netlink dump path to indicate
interferences with updates.
4) Fix 64 bits chain counters when they are retrieved from a 32 bits
arch, from Eric Dumazet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
