To avoid confusion caused by the increasing fragmentation of the BPF
Loader program, this commit would like to change to the libbpf loader
instead of using the bpf_load.
Thanks to libbpf's bpf_link interface, managing the tracepoint BPF
program is much easier. bpf_program__attach_tracepoint manages the
enable of tracepoint event and attach of BPF programs to it with a
single interface bpf_link, so there is no need to manage event_fd and
prog_fd separately.
This commit refactors xdp_monitor with using this libbpf API, and the
bpf_load is removed and migrated to libbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010181734.1109-2-danieltimlee@gmail.com
Vladimir Oltean says:
====================
Offload tc-vlan mangle to mscc_ocelot switch
This series offloads one more action to the VCAP IS1 ingress TCAM, which
is to change the classified VLAN for packets, according to the VCAP IS1
keys (VLAN, source MAC, source IP, EtherType, etc).
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a test that changes a VLAN ID from 200 to 300.
We also need to modify the preferences of the filters installed for the
other rules so that they are unique, because we now install the "tc-vlan
modify" filter in VCAP IS1 only temporarily, and we need to perform the
deletion by filter preference number.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the Extraction Frame Header contains a valid classified VLAN, use
that instead of the VLAN header present in the packet.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VCAP_IS1_ACT_VID_REPLACE_ENA action, from the VCAP IS1 ingress TCAM,
changes the classified VLAN.
We are only exposing this ability for switch ports that are under VLAN
aware bridges. This is because in standalone ports mode and under a
bridge with vlan_filtering=0, the ocelot driver configures the switch to
operate as VLAN-unaware, so the classified VLAN is not derived from the
802.1Q header from the packet, but instead is always equal to the
port-based VLAN ID of the ingress port. We _can_ still change the
classified VLAN for packets when operating in this mode, but the end
result will most likely be a drop, since both the ingress and the egress
port need to be members of the modified VLAN. And even if we install the
new classified VLAN into the VLAN table of the switch, the result would
still not be as expected: we wouldn't see, on the output port, the
modified VLAN tag, but the original one, even though the classified VLAN
was indeed modified. This is because of how the hardware works: on
egress, what is pushed to the frame is a "port tag", which gives us the
following options:
- Tag all frames with port tag (derived from the classified VLAN)
- Tag all frames with port tag, except if the classified VLAN is 0 or
equal to the native VLAN of the egress port
- No port tag
Needless to say, in VLAN-unaware mode we are disabling the port tag.
Otherwise, the existing VLAN tag would be ignored, and a second VLAN
tag (the port tag), holding the classified VLAN, would be pushed
(instead of replacing the existing 802.1Q tag). This is definitely not
what the user wanted when installing a "vlan modify" action.
So it is simply not worth bothering with VLAN modify rules under other
configurations except when the ports are fully VLAN-aware.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Claudiu Manoil says:
====================
enetc: Migrate to PHYLINK and PCS_LYNX
Transitioning the enetc driver from phylib to phylink.
Offloading the serdes configuration to the PCS_LYNX
module is a mandatory part of this transition. Aiming
for a cleaner, more maintainable design, and better
code reuse.
The first 2 patches are clean up prerequisites.
Tested on a p1028rdb board.
v2: validate() explicitly rejects now all interface modes not
supported by the driver instead of relying on the device tree
to provide only supported interfaces, and dropped redundant
activation of pcs_poll (addressing Ioana's findings)
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a methodical transition of the driver from phylib
to phylink, following the guidelines from sfp-phylink.rst.
The MAC register configurations based on interface mode
were moved from the probing path to the mac_config() hook.
MAC enable and disable commands (enabling Rx and Tx paths
at MAC level) were also extracted and assigned to their
corresponding phylink hooks.
As part of the migration to phylink, the serdes configuration
from the driver was offloaded to the PCS_LYNX module,
introduced in commit 0da4c3d393 ("net: phy: add Lynx PCS module"),
the PCS_LYNX module being a mandatory component required to
make the enetc driver work with phylink.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.cionei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of the transition of the enetc ethernet driver from phylib
to phylink, the in-band operation mode of the SGMII interface
from enetc port 0 needs to be specified explicitly for phylink.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Decouple internal mdio bus creation from serdes
configuration, as a prerequisite to offloading
serdes configuration to a different module.
Group together mdio bus creation routines, cleanup.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Decouple level MAC configuration based on phy interface type
from general port configuration.
Group together MAC and link configuration code.
Decouple external mdio bus creation from interface type
parsing. No longer return an (unhandled) error code when
phy_node not found, use phy_node to indicate whether the
port has a phy or not. No longer fall-through when serdes
configuration fails for the link modes that require
internal link configuration.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
This series addresses most of the feedback [0] that was to be followed
up from the last series, that is, UAPI helper comment improvements and
getting rid of the ifindex obj file hacks in the selftest by using a
BPF map instead. The __sk_buff data/data_end pointer work, I'm planning
to do in a later round as well as the mem*() BPF improvements we have
in Cilium for libbpf. Next, the series adds two features, i) a helper
called redirect_peer() to improve latency on netns switch, and ii) to
allow map in map with dynamic inner array map sizes. Selftests for each
are added as well. For details, please check individual patches, thanks!
[0] https://lore.kernel.org/bpf/cover.1601477936.git.daniel@iogearbox.net/
v5 -> v6:
- Going with Andrii's suggestion to make the misconfigured verifier
test more robust, and only probe on -EOPNOTSUPP (Andrii)
v4 -> v5:
- Replace cnt == -EOPNOTSUPP check with cnt < 0; I've used < 0
here as I think it's useful to keep the existing cnt == 0 ||
cnt >= ARRAY_SIZE(insn_buf) for error detection (Andrii)
v3 -> v4:
- Rename new array map flag to BPF_F_INNER_MAP (Alexei)
v2 -> v3:
- Remove tab that slipped into uapi helper desc (Jakub)
- Rework map in map for array to error from map_gen_lookup (Andrii)
v1 -> v2:
- Fixed selftest comment wrt inner1/inner2 value (Yonghong)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the test_tc_redirect test and add a small test that exercises the new
redirect_peer() helper for the IPv4 and IPv6 case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-7-daniel@iogearbox.net
Rename into test_tc_redirect.sh and move setup and test code into separate
functions so they can be reused for newly added tests in here. Also remove
the crude hack to override ifindex inside the object file via xxd and sed
and just use a simple map instead. Map given iproute2 does not support BTF
fully and therefore neither global data at this point.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201010234006.7075-6-daniel@iogearbox.net
Extend the "diff_size" subtest to also include a non-inlined array map variant
where dynamic inner #elems are possible.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201010234006.7075-5-daniel@iogearbox.net
Recent work in f4d0525921 ("bpf: Add map_meta_equal map ops") and 134fede4ee
("bpf: Relax max_entries check for most of the inner map types") added support
for dynamic inner max elements for most map-in-map types. Exceptions were maps
like array or prog array where the map_gen_lookup() callback uses the maps'
max_entries field as a constant when emitting instructions.
We recently implemented Maglev consistent hashing into Cilium's load balancer
which uses map-in-map with an outer map being hash and inner being array holding
the Maglev backend table for each service. This has been designed this way in
order to reduce overall memory consumption given the outer hash map allows to
avoid preallocating a large, flat memory area for all services. Also, the
number of service mappings is not always known a-priori.
The use case for dynamic inner array map entries is to further reduce memory
overhead, for example, some services might just have a small number of back
ends while others could have a large number. Right now the Maglev backend table
for small and large number of backends would need to have the same inner array
map entries which adds a lot of unneeded overhead.
Dynamic inner array map entries can be realized by avoiding the inlined code
generation for their lookup. The lookup will still be efficient since it will
be calling into array_map_lookup_elem() directly and thus avoiding retpoline.
The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips
inline code generation and relaxes array_map_meta_equal() check to ignore both
maps' max_entries. This also still allows to have faster lookups for map-in-map
when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed.
Example code generation where inner map is dynamic sized array:
# bpftool p d x i 125
int handle__sys_enter(void * ctx):
; int handle__sys_enter(void *ctx)
0: (b4) w1 = 0
; int key = 0;
1: (63) *(u32 *)(r10 -4) = r1
2: (bf) r2 = r10
;
3: (07) r2 += -4
; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key);
4: (18) r1 = map[id:468]
6: (07) r1 += 272
7: (61) r0 = *(u32 *)(r2 +0)
8: (35) if r0 >= 0x3 goto pc+5
9: (67) r0 <<= 3
10: (0f) r0 += r1
11: (79) r0 = *(u64 *)(r0 +0)
12: (15) if r0 == 0x0 goto pc+1
13: (05) goto pc+1
14: (b7) r0 = 0
15: (b4) w6 = -1
; if (!inner_map)
16: (15) if r0 == 0x0 goto pc+6
17: (bf) r2 = r10
;
18: (07) r2 += -4
; val = bpf_map_lookup_elem(inner_map, &key);
19: (bf) r1 = r0 | No inlining but instead
20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem()
; return val ? *val : -1; | for inner array lookup.
21: (15) if r0 == 0x0 goto pc+1
; return val ? *val : -1;
22: (61) r6 = *(u32 *)(r0 +0)
; }
23: (bc) w0 = w6
24: (95) exit
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
Add an efficient ingress to ingress netns switch that can be used out of tc BPF
programs in order to redirect traffic from host ns ingress into a container
veth device ingress without having to go via CPU backlog queue [0]. For local
containers this can also be utilized and path via CPU backlog queue only needs
to be taken once, not twice. On a high level this borrows from ipvlan which does
similar switch in __netif_receive_skb_core() and then iterates via another_round.
This helps to reduce latency for mentioned use cases.
Pod to remote pod with redirect(), TCP_RR [1]:
# percpu_netperf 10.217.1.33
RT_LATENCY: 122.450 (per CPU: 122.666 122.401 122.333 122.401 )
MEAN_LATENCY: 121.210 (per CPU: 121.100 121.260 121.320 121.160 )
STDDEV_LATENCY: 120.040 (per CPU: 119.420 119.910 125.460 115.370 )
MIN_LATENCY: 46.500 (per CPU: 47.000 47.000 47.000 45.000 )
P50_LATENCY: 118.500 (per CPU: 118.000 119.000 118.000 119.000 )
P90_LATENCY: 127.500 (per CPU: 127.000 128.000 127.000 128.000 )
P99_LATENCY: 130.750 (per CPU: 131.000 131.000 129.000 132.000 )
TRANSACTION_RATE: 32666.400 (per CPU: 8152.200 8169.842 8174.439 8169.897 )
Pod to remote pod with redirect_peer(), TCP_RR:
# percpu_netperf 10.217.1.33
RT_LATENCY: 44.449 (per CPU: 43.767 43.127 45.279 45.622 )
MEAN_LATENCY: 45.065 (per CPU: 44.030 45.530 45.190 45.510 )
STDDEV_LATENCY: 84.823 (per CPU: 66.770 97.290 84.380 90.850 )
MIN_LATENCY: 33.500 (per CPU: 33.000 33.000 34.000 34.000 )
P50_LATENCY: 43.250 (per CPU: 43.000 43.000 43.000 44.000 )
P90_LATENCY: 46.750 (per CPU: 46.000 47.000 47.000 47.000 )
P99_LATENCY: 52.750 (per CPU: 51.000 54.000 53.000 53.000 )
TRANSACTION_RATE: 90039.500 (per CPU: 22848.186 23187.089 22085.077 21919.130 )
[0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf
[1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201010234006.7075-3-daniel@iogearbox.net
Follow-up to address David's feedback that we should better describe internals
of the bpf_redirect_neigh() helper.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/bpf/20201010234006.7075-2-daniel@iogearbox.net
Move the skb_headroom check out of fr_hard_header and into pvc_xmit.
This has two benefits:
1. Originally we only do this check for skbs sent by users on Ethernet-
emulating PVC devices. After the change we do this check for skbs sent on
normal PVC devices, too.
(Also add a comment to make it clear that this is only a protection
against upper layers that don't take dev->needed_headroom into account.
Such upper layers should be rare and I believe they should be fixed.)
2. After the change we can simplify the parameter list of fr_hard_header.
We no longer need to use a pointer to pointers (skb_p) because we no
longer need to replace the skb inside fr_hard_header.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MTU setting for this DSA switch is global so we need
to keep track of the MTU set for each port, then as soon
as any MTU changes, roof the MTU to the biggest common
denominator and poke that into the switch MTU setting.
To achieve this we need a per-chip-variant state container
for the RTL8366RB to use for the RTL8366RB-specific
stuff. Other SMI switches does seem to have per-port
MTU setting capabilities.
Fixes: 5f4a8ef384 ("net: dsa: rtl8366rb: Support setting MTU")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Better place for of_mdio.c is drivers/net/mdio.
Move of_mdio.c from drivers/of to drivers/net/mdio
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When packets are received on the error queue, this function under
net_ratelimit():
netif_err(priv, hw, net_dev, "Err FD status = 0x%08x\n");
does not get printed. Instead we only see:
[ 3658.845592] net_ratelimit: 244 callbacks suppressed
[ 3663.969535] net_ratelimit: 230 callbacks suppressed
[ 3669.085478] net_ratelimit: 228 callbacks suppressed
Enabling NETIF_MSG_HW fixes this issue, and we can see some information
about the frame descriptors of packets.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out handling the private packet/byte counters to new
functions rtl_get_priv_stats() and rtl_inc_priv_stats().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Obviously this driver version doesn't make sense. Go with the default
and let ethtool display the kernel version.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make use of the new struct_size() helper instead of the offsetof() idiom.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fourth and last set of patches for v5.10. Most of these are iwlwifi
patches, but few small fixes to other drivers as well.
Major changes:
iwlwifi
* PNVM support (platform-specific phy config data)
* bump the FW API support to 59
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJfgIilAAoJEG4XJFUm622b/MoH+wfx+CnW2J49uRAlAiAyJ8oW
pBKvJF1b6kbLeWurQPQH6ecmmYy0H/Cr8Zy4IW+YP7XN5PbSpDe4HXH6GkLP41fv
73kd0qHPFp42dmArImCqd8+9vAuh6C/taHSPV8klGaSfATUvvDIwgPrxGJnaGvwm
3E+SOnGcvqRV1fkBi7CArdIa1DzZwyu9q9zvQKbElmL7lX/r5kAzkHZqlMr3ZyjO
Gvuzvz9FIKvkU81IxtR8VXJh5RQ9WCXvsa00ZoP489jUz/lUoC2Rjofn55BcdAIh
1V4N7yOM2KFjDo3RWGZo+fqNo6LXREMyVQetmXCWPzFzCkMTN5FCWuj182dnYIM=
=9NpN
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.10
Fourth and last set of patches for v5.10. Most of these are iwlwifi
patches, but few small fixes to other drivers as well.
Major changes:
iwlwifi
* PNVM support (platform-specific phy config data)
* bump the FW API support to 59
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
-----BEGIN PGP SIGNATURE-----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=TrMG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A handful of changes:
* fixes for the recent S1G work
* a docbook build time improvement
* API to pass beacon rate to lower-level driver
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
netlink: export policy on validation failures
Export the policy used for attribute validation when it fails,
so e.g. for an out-of-range attribute userspace immediately gets
the valid ranges back.
v2 incorporates the suggestion from Jakub to have a function to
estimate the size (netlink_policy_dump_attr_size_estimate()) and
check that it does the right thing on the *normal* policy dumps,
not (just) when calling it from the error scenario.
v3 only addresses a few minor style issues.
v4 fixes up a forgotten 'git add' ... sorry.
v5 is a resend, I messed up v4's cover letter subject (saying v3)
and apparently the second patch didn't go out at all.
Tested using nl80211/iw in a few scenarios, seems to work fine
and return the policy back, e.g.
kernel reports: integer out of range
policy: 04 00 0b 00 0c 00 04 00 01 00 00 00 00 00 00 00
^ padding
^ minimum allowed value
policy: 04 00 0b 00 0c 00 05 00 ff ff ff ff 00 00 00 00
^ padding
^ maximum allowed value
policy: 08 00 01 00 04 00 00 00
^ type 4 == U32
for an out-of-range case.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new attribute NLMSGERR_ATTR_POLICY to the extended ACK
to advertise the policy, e.g. if an attribute was out of range,
you'll know the range that's permissible.
Add new NL_SET_ERR_MSG_ATTR_POL() and NL_SET_ERR_MSG_ATTR_POL()
macros to set this, since realistically it's only useful to do
this when the bad attribute (offset) is also returned.
Use it in lib/nlattr.c which practically does all the policy
validation.
v2:
- add and use netlink_policy_dump_attr_size_estimate()
v3:
- remove redundant break
v4:
- really remove redundant break ... sorry
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the per-attribute policy writing into a new
helper function, to be used later for dumping out the
policy of a rejected attribute.
v2:
- fix some indentation
v3:
- change variable order in netlink_policy_dump_write()
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karsten Graul says:
====================
net/smc: updates 2020-10-07
Patch 1 and 2 address warnings from static code checkers, and patch 3
handles a case when all proposed ISM V2 devices fail to init and no V1
devices are tried afterwards.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Field ini->smcd_version is set to SMC_V2 before calling
smc_listen_ism_init(). This clears the V1 bit that may be set. When all
matching ISM V2 devices fail to initialize then the smcd_version field
needs to get restored to allow any possible V1 devices to initialize.
And be consistent, always go to the not_found label when no device was
found.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
coccinelle informs about
net/smc/af_smc.c:1770:10-11: WARNING: opportunity for kzfree/kvfree_sensitive
Its not that kzfree() would help here, the memset() is done to prepare
the buffer for another socket receive.
Fix that warning message by reordering the calls, while at it eliminate
the unneeded variable cclc2 and use sizeof(*buf) as above in the same
function. No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Static code checkers warn of inconsistent returns because the lgr mutex
is locked in one function and unlocked in a function called by the
locking function:
net/smc/af_smc.c:823 smc_connect_rdma() warn: inconsistent returns 'smc_client_lgr_pending'.
net/smc/af_smc.c:897 smc_connect_ism() warn: inconsistent returns 'smc_server_lgr_pending'.
Make the code consistent by doing the unlock in the same function that
fetches the lock. No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl9+MLsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqScfCACBLbt8heMyVQQYd130/oIAvQ2o8Bjf
DPa36CVMYOGH1KOCnEyuc+oKsXeJfy33Faxe3+s7q2aMkddH7zhHQNiohPgwWAsM
AuAjRgbAVkDd9BTAbOS/cujftZBBccGRUuusbCg7lsBdwhGQbCggfYbOmGt2B8Gv
Wt3s2td8i90WutFb3UN3ec5N44jTn+WQvuOjX0Dzt/qi3r5qyC5JvcdkW3LAfxEG
X7bJ6cf8HRgUyPAALJGdoWdKT+ImmFbUJc8WuX9PdlYzxR+FyPKQgxD187ARTeLA
OqQSMHi4jRNywei0WUg5YoR0qPAHWKOLIMBK45TWNfa0p2+JzRbxTf3o
=7UL+
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.10-20201007' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
linux-can-next-for-5.10-20201007
The first 3 patches are by me and fix several warnings found
when compiling the kernel with W=1.
Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate
the renaming of the mcp251xfd driver.
Vincent Mailhol contributes 3 patches for the CAN networking layer.
First error queue support is added the the CAN RAW protocol.
The second patch converts the get_can_dlc() and get_canfd_dlc()
in-Kernel-only macros from using __u8 to u8.
The third patch adds a helper function to calculate the length of
one bit in in multiple of time quanta.
Oliver Hartkopp's patch add support for the ISO 15765-2:2016
transport protocol to the CAN stack.
Three patches by Lad Prabhakar add documentation for various
new rcar controllers to the device tree bindings of the rcar_can
and rcan_canfd driver.
Michael Walle's patch adds various processors to the flexcan
driver binding documentation.
The next two patches are by me and target the flexcan driver aswell.
The remove the ack_grp and ack_bit from the fsl,stop-mode DT property
and the driver, as they are not used anymore. As these are the last
two arguments this change will not break existing device trees.
The last three patches are by Srinivas Neeli and target
the xilinx_can driver.
The first one increases the lower limit for the bit rate
prescaler to 2, the other two fix sparse and coverity findings.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2020-10-07
This series contains updates to ice driver only.
Andy Shevchenko changes usage to %*phD format to print small buffer as hex
string.
Bruce removes repeated words reported by checkpatch.
Ani changes ice_info_get_dsn() to return void as it always returns
success.
Jake adds devlink reporting of fw.app.bundle_id. Moves devlink_port
structure to ice_vsi to resolve issues with cleanup. Adds additional
debug info for firmware updates.
Bixuan Cui resolves -Wpointer-to-int-cast warnings.
Dan adds additional packet type masks and checks to prevent overwriting
existing Flow Director rules.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A subsequent addition of an IP4 or IP6 rule after other rules would
overwrite any existing TCAM entries of related L4 protocols(ex: tcp4 or
udp6). This was due to the mask including too many TCAM entries. Add new
packet type masks with bits properly excluded so rules are not overwritten.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Brijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pointers should be casted to unsigned long to avoid
-Wpointer-to-int-cast warnings:
drivers/net/ethernet/intel/ice/ice_flow.h:197:33: warning:
cast from pointer to integer of different size
drivers/net/ethernet/intel/ice/ice_flow.h:198:32: warning:
cast to pointer from integer of different size
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While debugging a recent failure to update the flash of an ice device,
I found it helpful to add additional logging which helped determine the
root cause of the problem being a timeout issue.
Add some extra dev_dbg() logging messages which can be enabled using the
dynamic debug facility, including one for ice_aq_wait_for_event that
will use jiffies to capture a rough estimate of how long we waited for
the completion of a firmware command.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Brijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the devlink_port structure is stored within the ice_pf. This
made sense because we create a single devlink_port for each PF. This
setup does not mesh with the abstractions in the driver very well, and
led to a flow where we accidentally call devlink_port_unregister twice
during error cleanup.
In particular, if devlink_port_register or devlink_port_unregister are
called twice, this leads to a kernel panic. This appears to occur during
some possible flows while cleaning up from a failure during driver
probe.
If register_netdev fails, then we will call devlink_port_unregister in
ice_cfg_netdev as it cleans up. Later, we again call
devlink_port_unregister since we assume that we must cleanup the port
that is associated with the PF structure.
This occurs because we cleanup the devlink_port for the main PF even
though it was not allocated. We allocated the port within a per-VSI
function for managing the main netdev, but did not release the port when
cleaning up that VSI, the allocation and destruction are not aligned.
Instead of attempting to manage the devlink_port as part of the PF
structure, manage it as part of the PF VSI. Doing this has advantages,
as we can match the de-allocation of the devlink_port with the
unregister_netdev associated with the main PF VSI.
Moving the port to the VSI is preferable as it paves the way for
handling devlink ports allocated for other purposes such as SR-IOV VFs.
Since we're changing up how we allocate the devlink_port, also change
the indexing. Originally, we indexed the port using the PF id number.
This came from an old goal of sharing a devlink for each physical
function. Managing devlink instances across multiple function drivers is
not workable. Instead, lets set the port number to the logical port
number returned by firmware and set the index using the VSI index
(sometimes referred to as VSI handle).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add "fw.app.bundle_id" to display the DDP Track ID of the active DDP
package. This id is similar to "fw.bundle_id" and is a unique identifier
for the DDP package that is loaded in the device. Each new DDP has
a unique Track ID generated for it, and the ID can be used to identify
and track the DDP package.
Add documentation for the new devlink info version.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_info_get_dsn always returns 0, so just make it void.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new test in checkpatch detects repeated words; cleanup all pre-existing
occurrences of those now.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Co-developed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use %*phD format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the KSZ9563 3-Port Gigabit Ethernet Switch to the
ksz9477 driver. The KSZ9563 supports both SPI (already in) and I2C. The
ksz9563 is already in the device tree binding documentation.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
Make two verifier improvements:
- The llvm register allocator may use two different registers representing
the same virtual register. Teach the verifier to recognize that.
- Track bounded scalar spill/fill.
The profiler[123] test in patch 3 will fail to load without patches 1 and 2.
The profiler[23] test may fail to load on older llvm due to speculative
code motion nd instruction combining optimizations that are fixed in
https://reviews.llvm.org/D85570
v1 -> v2:
- fixed 32-bit mov issue spotted by John.
- allowed r2=r1; r3=r2; sequence as suggested by John.
- added comments, acks, more tests.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The main purpose of the profiler test to check different llvm generation
patterns to make sure the verifier can load these large programs.
Note that profiler.inc.h test doesn't follow strict kernel coding style.
The code was formatted in the kernel style, but variable declarations are
kept as-is to preserve original llvm IR pattern.
profiler1.c should pass with older and newer llvm
profiler[23].c may fail on older llvm that don't have:
https://reviews.llvm.org/D85570
because llvm may do speculative code motion optimization that
will generate code like this:
// r9 is a pointer to map_value
// r7 is a scalar
17: bf 96 00 00 00 00 00 00 r6 = r9
18: 0f 76 00 00 00 00 00 00 r6 += r7
19: a5 07 01 00 01 01 00 00 if r7 < 257 goto +1
20: bf 96 00 00 00 00 00 00 r6 = r9
// r6 is used here
The verifier will reject such code with the error:
"math between map_value pointer and register with unbounded min value is not allowed"
At insn 18 the r7 is indeed unbounded. The later insn 19 checks the bounds and
the insn 20 undoes map_value addition. It is currently impossible for the
verifier to understand such speculative pointer arithmetic. Hence llvm D85570
addresses it on the compiler side.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-4-alexei.starovoitov@gmail.com
Under register pressure the llvm may spill registers with bounds into the stack.
The verifier has to track them through spill/fill otherwise many kinds of bound
errors will be seen. The spill/fill of induction variables was already
happening. This patch extends this logic from tracking spill/fill of a constant
into any bounded register. There is no need to track spill/fill of unbounded,
since no new information will be retrieved from the stack during register fill.
Though extra stack difference could cause state pruning to be less effective, no
adverse affects were seen from this patch on selftests and on cilium programs.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-3-alexei.starovoitov@gmail.com
The llvm register allocator may use two different registers representing the
same virtual register. In such case the following pattern can be observed:
1047: (bf) r9 = r6
1048: (a5) if r6 < 0x1000 goto pc+1
1050: ...
1051: (a5) if r9 < 0x2 goto pc+66
1052: ...
1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */
This is normal behavior of greedy register allocator.
The slides 137+ explain why regalloc introduces such register copy:
http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf
There is no way to tell llvm 'not to do this'.
Hence the verifier has to recognize such patterns.
In order to track this information without backtracking allocate ID
for scalars in a similar way as it's done for find_good_pkt_pointers().
When the verifier encounters r9 = r6 assignment it will assign the same ID
to both registers. Later if either register range is narrowed via conditional
jump propagate the register state into the other register.
Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The
register ID is ignored for scalars in regsafe() and doesn't affect state
pruning. mark_reg_unknown() clears the ID. It's used to process call, endian
and other instructions. Hence ID is explicitly cleared only in
adjust_reg_min_max_vals() and in 32-bit mov.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201009011240.48506-2-alexei.starovoitov@gmail.com
RDS/IB tries to refill the recv buffer in softirq context using
GFP_NOWAIT flag. However alloc failure is handled by queueing a work to
refill the recv buffer with GFP_KERNEL flag. This means failure to
allocate with GFP_NOWAIT isn't fatal. Do not print the PAF warnings if
softirq context fails to refill the recv buffer. We will see the PAF
warnings when worker also fails to allocate.
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
