This prevents use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Also add mod_devicetable.h include given struct of_device_id is
declared there.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200910173242.621168-13-jic23@kernel.org
These result in a very small reduction in driver size, but at the
cost of more complex build and slightly harder to read code.
In the case of of_match_ptr it also prevents use of PRP0001
ACPI based identification. In this particular case we have
a valid ACPI/PNP ID that I am assuming was issued by Analog
Devices. That should be used in preference to PRP0001 but doesn't
mean we should prevent that route.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200910173242.621168-12-jic23@kernel.org
These result in a very small reduction in driver size, but at the
cost of more complex build and slightly harder to read code.
In the case of of_match_ptr it also prevents use of PRP0001
ACPI based identification. In this particular case we have
a valid ACPI/PNP ID that I am assuming was issued by Analog
Devices. That should be used in preference to PRP0001 but doesn't
mean we should prevent that route.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200910173242.621168-11-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Hence drop them from this driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20200910173242.621168-10-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Hence drop them from this driver.
Also switch to device_get_match_data() from of_ variant and adjust
headers to reflect the change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200910173242.621168-9-jic23@kernel.org
This change allows the use of the driver with ACPI via PRP0001
and remove an example of an anti pattern I'm trying to remove from IIO.
Also adjust includes to reflect this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-8-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Also use device_get_match_data() rather than devicetree only version.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200910173242.621168-7-jic23@kernel.org
Given that an ACPI binding must start with 3 or 4 capitals,
this cannot represent a valid binding.
It seems unlikely anything out there is using it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Maury Anderson <maury.anderson@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-6-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Whilst this driver has an ACPI binding, it is not of a form
that is valid under ACPI so will be dropped shortly.
Also switch to device_get_match_data() and switch headers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Maury Anderson <maury.anderson@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-5-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Drop them to remove this restriction.
Also switch headers to reflect this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20200910173242.621168-4-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Drop them to remove this restriction.
Also switch of.h for mod_devicetable.h include given use of
struct of_device_id which is defined in that header.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20200910173242.621168-3-jic23@kernel.org
These prevent use of this driver with ACPI via PRP0001 and are
an example of an anti pattern I'm trying to remove from IIO.
Drop them to remove this restriction.
Also added mod_devicetable.h include given use of struct of_device_id
which is defined in that header.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Phil Reid <preid@eletromag.com.au>
Link: https://lore.kernel.org/r/20200910173242.621168-2-jic23@kernel.org
I'd like to be enable W=1 for all IIO builds as it catches real issues as well
as more minor documentation issues such as this (also good to fix though!)
drivers/iio/imu/adis16400.c:183: warning: Function parameter or member 'avail_scan_mask' not described in 'adis16400_state'
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200913132115.800131-2-jic23@kernel.org
Currently the iio_buffer_{alloc,free}_sysfs_and_mask() take 'indio_dev' as
primary argument. This change splits the main logic into a private function
that takes an IIO buffer as primary argument.
That way, the functions can be extended to configure the sysfs for multiple
buffers.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200917125951.861-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use only one line for the closing bracket of the last entry and the
opening bracket for the next one to keep the style across the whole
array consistent. Also add a "sentinel" comment to the last entry and
remove the comma to ensure that there won't be any entry after it.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200915192621.13202-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We should probably print what the expected chip-ID is. We already have
that information available, based on the device specified via
device-tree.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916083128.73729-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop `adis_setup_buffer_and_trigger()`. All users were updated to use
the devm version of this function. This avoids having almost the same
code repeated.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-11-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-8-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-7-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-6-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-5-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the adis managed device functions to setup the buffer and the trigger.
The ultimate goal will be to completely drop the non devm version from
the lib.
Since we are here, drop the `.remove` callback by further using devm
functions.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20200915120258.161587-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock.
The lock protect the state of the device from potential concurrent writes.
The device is configured via a sequence of SPI writes, and this lock is
meant to prevent the start of another sequence before another one has
finished.
This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916092731.77220-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state from potential concurrent write
accesses from userspace. The write operation requires an SPI write, then
toggling of a GPIO, so the lock aims to protect the sanity of the entire
sequence of operation.
This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200916092535.76527-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock. The lock protects against potential races when
reading the CR reg and then updating, so that the state of pm_runtime
is consistent between the two operations.
This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/20200916092349.75647-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend support to read/write byte data from/to the device using
debugfs iio interface.
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910180450.29696-4-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Provide a way for continuous data capture by setting up buffer support. The
data ready signal exposed at the SYNC pin of the ADXRS290 is exploited as
a hardware interrupt which triggers to fill the buffer.
Triggered buffer setup was tested with both hardware trigger (DATA_RDY) and
software triggers (sysfs-trig & hrtimer).
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910180450.29696-2-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of devm_add_action_or_reset() hook to switch device into STANDBY
mode during standard resource unwinding. The patch includes a helper
function, in the form of adxrs290_set_mode(), to realise driving the
device into STANDBY mode.
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200910122711.16670-1-nish.malpani25@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Conversion of error paths to dev_err_probe() dropped one return
statement. The driver will continue to probe if getting booster
regulator fails.
Fixes: ce30eeb613 ("iio: adc: stm32: Simplify with dev_err_probe()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/1599727927-7776-1-git-send-email-krzk@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We found some sensors which are much slower (20% at room temperature)
than nominal. According to the data sheet, up to 27% is possible. Now I
add 33% to the nominal time out, hopefully this is enough.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200909154439.10308-1-ceggers@arri.de
Fixes: 403e5586b5 ("iio: light: as73211: New driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since object temperature might be different than the sensor temperature
the infrared sensors should provide an interface to inject ambient
temperature. This was in past done via write to ambient temperature
interface (in_temp_ambient_raw), but I think most people did not know
about it. This solution introduces a new iio type of the CALIBAMBIENT
which is hopefully more descriptive and more explicit about the purpose
and capabilities of the sensors.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200906210231.383976-1-cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On one board I found that:
probe of 5-0028 returned 1 after 259547 usecs
While some of this time is attributable to the pile of i2c transfers
that we do at probe time, the lion's share (over 200 ms) is sitting
waiting in the polling loop in sx9310_init_compensation() waiting for
the hardware to indicate that it's done.
There's no reason to block probe of all other devices on our probe.
Turn on async probe.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Link: https://lore.kernel.org/r/20200901081920.v2.1.Id02b2f451b3eed71ddd580f4b8b44b3e33e84970@changeid
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There seems no reason to allow for compile-testing on ARM only, so
remove this restriction.
Build-tested with allyesconfig on x86.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200904170416.16061-1-alex.dewar90@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are few blank lines that split structure definitions
with their users. Remove them to increase readability.
While here, update copyright year.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver is quite likely used only on ACPI based platforms and
rarely build with CONFIG_ACPI=n. Even though, the few dozens of bytes
is better than ugly ifdeffery and inclusion of heavy header.
As a result, replace acpi.h with mod_devicetable.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert to use ->read_avail() instead of open-coded attribute handling.
While here, fix the typo in array definition and append comma in case of
the future extension.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Potentially bma220_init() and bma220_deinit() may return positive codes.
Fix the logic to return proper error codes instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A transfer may fall shorter than the bytes in the block.
This information is available in the residue from the DMA engine, so we can
compute actual `bytes_used` with that by subtracting the residue.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200826052011.13348-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By default, if all three channels (x, y, z) are enabled, sample sets of
concurrent 3-axis data is stored in the FIFO. This patch adds the option
to configure the FIFO to store peak acceleration (x, y and z) of every
over-threshold event. When pushing to iio buffer we push only enabled
axis data.
Currently the driver configures adxl372 to work in loop mode.
The inactivity and activity timings decide how fast the chip
will loop through the awake and waiting states and the
thresholds on x,y,z axis decide when activity or inactivity
will be detected.
This patch adds standard events sysfs entries for the inactivity
and activity timings: thresh_falling_period/thresh_rising_period
and for the in_accel_x_thresh_falling/rising_value.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200810093257.65929-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is some inconsistency and whitespace cleanup performed in this
patch. It was done on top of my other patches, but I can rebase to head
of the togreg branch if it would go in sooner.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-6-cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For some time the market wants medical grade accuracy in medical range,
while still retaining the declared accuracy outside of the medical range
within the same sensor. That is why we created extended calibration
which is automatically switched to when object temperature is too high.
This patch also introduces the object_ambient_temperature variable which
is needed for more accurate calculation of the object infra-red
footprint as sensor's ambient temperature might be totally different
than what the ambient temperature is at object and that is why we can
have some more errors which can be eliminated. Currently this temperature
is fixed at 25, but the interface to adjust it by user (with external
sensor or just IR measurement of the other object which acts as ambient),
will be introduced in another commit.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-5-cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
