Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being done
via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and application
programmers can take advantage of the (still experimental DAX) feature.
-----BEGIN PGP SIGNATURE-----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=rS19
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part one from Darrick Wong:
"After many years of LKML-wrangling about how to enable programs to
query and influence the file data access mode (DAX) when a filesystem
resides on storage devices such as persistent memory, Ira Weiny has
emerged with a proposed set of standard behaviors that has not been
shot down by anyone! We're more or less standardizing on the current
XFS behavior and adapting ext4 to do the same.
This is the first of a handful pull requests that will make ext4 and
XFS present a consistent interface for user programs that care about
DAX. We add a statx attribute that programs can check to see if DAX is
enabled on a particular file. Then, we update the DAX documentation to
spell out the user-visible behaviors that filesystems will guarantee
(until the next storage industry shakeup). The on-disk inode flag has
been in XFS for a few years now.
Summary:
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being
done via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and
application programmers can take advantage of the (still
experimental DAX) feature"
Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/
* tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Documentation/dax: Update Usage section
fs/stat: Define DAX statx attribute
fs: Remove unneeded IS_DAX() check in io_is_direct()
-----BEGIN PGP SIGNATURE-----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=H+/Z
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
-----BEGIN PGP SIGNATURE-----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=HYf4
-----END PGP SIGNATURE-----
Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
Merge updates from Andrew Morton:
"A few little subsystems and a start of a lot of MM patches.
Subsystems affected by this patch series: squashfs, ocfs2, parisc,
vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
swap, memcg, pagemap, memory-failure, vmalloc, kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
kasan: move kasan_report() into report.c
mm/mm_init.c: report kasan-tag information stored in page->flags
ubsan: entirely disable alignment checks under UBSAN_TRAP
kasan: fix clang compilation warning due to stack protector
x86/mm: remove vmalloc faulting
mm: remove vmalloc_sync_(un)mappings()
x86/mm/32: implement arch_sync_kernel_mappings()
x86/mm/64: implement arch_sync_kernel_mappings()
mm/ioremap: track which page-table levels were modified
mm/vmalloc: track which page-table levels were modified
mm: add functions to track page directory modifications
s390: use __vmalloc_node in stack_alloc
powerpc: use __vmalloc_node in alloc_vm_stack
arm64: use __vmalloc_node in arch_alloc_vmap_stack
mm: remove vmalloc_user_node_flags
mm: switch the test_vmalloc module to use __vmalloc_node
mm: remove __vmalloc_node_flags_caller
mm: remove both instances of __vmalloc_node_flags
mm: remove the prot argument to __vmalloc_node
mm: remove the pgprot argument to __vmalloc
...
PF_LESS_THROTTLE exists for loop-back nfsd (and a similar need in the
loop block driver and callers of prctl(PR_SET_IO_FLUSHER)), where a
daemon needs to write to one bdi (the final bdi) in order to free up
writes queued to another bdi (the client bdi).
The daemon sets PF_LESS_THROTTLE and gets a larger allowance of dirty
pages, so that it can still dirty pages after other processses have been
throttled. The purpose of this is to avoid deadlock that happen when
the PF_LESS_THROTTLE process must write for any dirty pages to be freed,
but it is being thottled and cannot write.
This approach was designed when all threads were blocked equally,
independently on which device they were writing to, or how fast it was.
Since that time the writeback algorithm has changed substantially with
different threads getting different allowances based on non-trivial
heuristics. This means the simple "add 25%" heuristic is no longer
reliable.
The important issue is not that the daemon needs a *larger* dirty page
allowance, but that it needs a *private* dirty page allowance, so that
dirty pages for the "client" bdi that it is helping to clear (the bdi
for an NFS filesystem or loop block device etc) do not affect the
throttling of the daemon writing to the "final" bdi.
This patch changes the heuristic so that the task is not throttled when
the bdi it is writing to has a dirty page count below below (or equal
to) the free-run threshold for that bdi. This ensures it will always be
able to have some pages in flight, and so will not deadlock.
In a steady-state, it is expected that PF_LOCAL_THROTTLE tasks might
still be throttled by global threshold, but that is acceptable as it is
only the deadlock state that is interesting for this flag.
This approach of "only throttle when target bdi is busy" is consistent
with the other use of PF_LESS_THROTTLE in current_may_throttle(), were
it causes attention to be focussed only on the target bdi.
So this patch
- renames PF_LESS_THROTTLE to PF_LOCAL_THROTTLE,
- removes the 25% bonus that that flag gives, and
- If PF_LOCAL_THROTTLE is set, don't delay at all unless the
global and the local free-run thresholds are exceeded.
Note that previously realtime threads were treated the same as
PF_LESS_THROTTLE threads. This patch does *not* change the behvaiour
for real-time threads, so it is now different from the behaviour of nfsd
and loop tasks. I don't know what is wanted for realtime.
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Chuck Lever <chuck.lever@oracle.com> [nfsd]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Link: http://lkml.kernel.org/r/87ftbf7gs3.fsf@notabene.neil.brown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit 7b11eab041 ("blk-mq: blk-mq: provide forced completion
method") exports new API to force a request to complete without error
injection.
There should be no error injection when completing a request by timeout
handler.
Otherwise, the below would hang because timeout handler is failed.
echo 100 > /sys/kernel/debug/fail_io_timeout/probability
echo 1000 > /sys/kernel/debug/fail_io_timeout/times
echo 1 > /sys/block/nullb0/io-timeout-fail
dd if=/dev/zero of=/dev/nullb0 bs=512 count=1 oflag=direct
With this patch, the timeout handler is able to complete the IO.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup
up queue mapping. Thomas mentioned the following point[1]:
"That was the constraint of managed interrupts from the very beginning:
The driver/subsystem has to quiesce the interrupt line and the associated
queue _before_ it gets shutdown in CPU unplug and not fiddle with it
until it's restarted by the core when the CPU is plugged in again."
However, current blk-mq implementation doesn't quiesce hw queue before
the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a
cpuhp state handled after the CPU is down, so there isn't any chance to
quiesce the hctx before shutting down the CPU.
Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs
where the last CPU goes away, and wait for completion of in-flight
requests. This guarantees that there is no inflight I/O before shutting
down the managed IRQ.
Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need
to wait for completion of in-flight requests from these drivers to avoid
a potential dead-lock. It is safe to do this for stacking drivers as those
do not use interrupts at all and their I/O completions are triggered by
underlying devices I/O completion.
[1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[hch: different retry mechanism, merged two patches, minor cleanups]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to directly set the TCP_QUICKACK sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the TCP_CORK sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The zcomp driver uses per-CPU compression. The per-CPU data pointer is
acquired with get_cpu_ptr() which implicitly disables preemption.
It allocates memory inside the preempt disabled region which conflicts
with the PREEMPT_RT semantics.
Replace the implicit preemption control with an explicit local lock.
This allows RT kernels to substitute it with a real per CPU lock, which
serializes the access but keeps the code section preemptible. On non RT
kernels this maps to preempt_disable() as before, i.e. no functional
change.
[bigeasy: Use local_lock(), description, drop reordering]
Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200527201119.1692513-8-bigeasy@linutronix.de
zcomp::stream is a per-CPU pointer, pointing to struct zcomp_strm
which contains two pointers. Having struct zcomp_strm allocated
directly as per-CPU memory would avoid one additional memory
allocation and a pointer dereference. This also simplifies the
addition of a local_lock to struct zcomp_strm.
Allocate zcomp::stream directly as per-CPU memory.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200527201119.1692513-7-bigeasy@linutronix.de
Switch zram to use the nicer bio accounting helpers, and as part of that
ensure each bio is counted as a single I/O request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch rsxx to use the nicer bio accounting helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch drbd to use the nicer bio accounting helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the switch of floppy driver to blk-mq, the contended (fdc_busy) case
in floppy_queue_rq() is not handled correctly.
In case we reach floppy_queue_rq() with fdc_busy set (i.e. with the floppy
locked due to another request still being in-flight), we put the request
on the list of requests and return BLK_STS_OK to the block core, without
actually scheduling delayed work / doing further processing of the
request. This means that processing of this request is postponed until
another request comes and passess uncontended.
Which in some cases might actually never happen and we keep waiting
indefinitely. The simple testcase is
for i in `seq 1 2000`; do echo -en $i '\r'; blkid --info /dev/fd0 2> /dev/null; done
run in quemu. That reliably causes blkid eventually indefinitely hanging
in __floppy_read_block_0() waiting for completion, as the BIO callback
never happens, and no further IO is ever submitted on the (non-existent)
floppy device. This was observed reliably on qemu-emulated device.
Fix that by not queuing the request in the contended case, and return
BLK_STS_RESOURCE instead, so that blk core handles the request
rescheduling and let it pass properly non-contended later.
Fixes: a9f38e1dec ("floppy: convert to blk-mq")
Cc: stable@vger.kernel.org
Tested-by: Libor Pechacek <lpechacek@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable error is being assigned a value that is never
read so the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zoned block device specification do not define the behavior of
discard/trim command as this command is generally replaced by the reset
write pointer (zone reset) command. Emulate this in null_blk by making
zoned and discard options mutually exclusive.
Suggested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.
Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.
In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
in loop_config.info.lo_flags
Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system
Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.
The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for a new ioctl that needs to copy_from_user(); makes the
code easier to read as well.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So we can use it without forward declaration. This is a separate commit
to make it easier to verify that this is just a move, without functional
modifications.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out this code into a separate function, so it can be reused by
other code more easily.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function was now only used by loop_set_capacity(). Just open code
the remaining code in the caller instead.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
figure_loop_size() calculates the loop size based on the passed in
parameters, but at the same time it updates the offset and sizelimit
parameters in the loop device configuration. That is a somewhat
unexpected side effect of a function with this name, and it is only only
needed by one of the two callers of this function - loop_set_status().
Move the lo_offset and lo_sizelimit assignment back into loop_set_status(),
and use the newly factored out functions to validate and apply the newly
calculated size. This allows us to get rid of figure_loop_size() in a
follow-up commit.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This was recently added to block/genhd.c, and takes care of both
updating the capacity and notifying userspace of the new size.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code is used repeatedly.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sector_t is now always u64, so we don't need to check for truncation.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
loop_set_status() calls loop_config_discard() to configure discard for
the loop device; however, the discard configuration depends on whether
the loop device uses encryption, and when we call it the encryption
configuration has not been updated yet. Move the call down so we apply
the correct discard configuration based on the new configuration.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch suppresses an uninteresting KMSAN complaint without affecting
performance of the null_blk driver if CONFIG_KMSAN is disabled.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support REQ_OP_ZONE_APPEND requests for null_blk devices with zoned
mode enabled. Use the internally tracked zone write pointer position
as the actual write position and return it using the command request
__sector field in the case of an mq device and using the command BIO
sector in the case of a BIO device.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Modify the interface of blk_revalidate_disk_zones() to add an optional
driver callback function that a driver can use to extend processing
done during zone revalidation. The callback, if defined, is executed
with the device request queue frozen, after all zones have been
inspected.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UBSAN: array-index-out-of-bounds in drivers/block/floppy.c:1521:45
index 16 is out of range for type 'unsigned char [16]'
Call Trace:
...
setup_rw_floppy+0x5c3/0x7f0
floppy_ready+0x2be/0x13b0
process_one_work+0x2c1/0x5d0
worker_thread+0x56/0x5e0
kthread+0x122/0x170
ret_from_fork+0x35/0x40
From include/uapi/linux/fd.h:
struct floppy_raw_cmd {
...
unsigned char cmd_count;
unsigned char cmd[16];
unsigned char reply_count;
unsigned char reply[16];
...
}
This out-of-bounds access is intentional. The command in struct
floppy_raw_cmd may take up the space initially intended for the reply
and the reply count. It is needed for long 82078 commands such as
RESTORE, which takes 17 command bytes. Initial cmd size is not enough
and since struct setup_rw_floppy is a part of uapi we check that
cmd_count is in [0:16+1+16] in raw_cmd_copyin().
The patch adds union with original cmd,reply_count,reply fields and
fullcmd field of equivalent size. The cmd accesses are turned to
fullcmd where appropriate to suppress UBSAN warning.
Link: https://lore.kernel.org/r/20200501134416.72248-5-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Use FD_RAW_CMD_SIZE, FD_RAW_REPLY_SIZE defines instead of magic numbers
for cmd & reply buffers of struct floppy_raw_cmd. Remove local to
floppy.c MAX_REPLIES define, as it is now FD_RAW_REPLY_SIZE.
FD_RAW_CMD_FULLSIZE added as we allow command to also fill reply_count
and reply fields.
Link: https://lore.kernel.org/r/20200501134416.72248-4-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Use FD_AUTODETECT_SIZE for autodetect buffer size in struct
floppy_drive_params instead of a magic number.
Link: https://lore.kernel.org/r/20200501134416.72248-3-efremov@linux.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
Remove pr_cont() and use print_hex_dump() in setup_DMA() to print the
contents of the cmd buffer.
Link: https://lore.kernel.org/r/20200501134416.72248-2-efremov@linux.com
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Denis Efremov <efremov@linux.com>
When called with a negative drive value, set_fdc() would stick to the
current fdc (which was assumed to reflect the current_drive's FDC). We
do not need this anymore as the last call place with a negative value
was just addressed. Let's make this function always set both current_fdc
and current_drive so that there's no more ambiguity. A few comments
stating this were added to a few non-obvious places.
Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
This macro equals -1 and is used as an alternative for current_drive when
calling reschedule_timeout(), which in turn needs to remap it. This only
adds obfuscation, let's simply use current_drive.
Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
In floppy_resume() we don't properly reinitialize all FDCs, instead
we reinitialize the current FDC once per available FDC because value
-1 is passed to user_reset_fdc(). Let's simply save the current drive
and properly reinitialize each FDC.
Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
There's no need to iterate on current_fdc in do_floppy_init() anymore,
in the first case it's only used as an array index to access fdc_state[],
so let's get rid of this confusing assignment. The second case is a bit
trickier because user_reset_fdc() needs to already know current_fdc when
called with drive==-1 due to this call chain:
user_reset_fdc()
lock_fdc()
set_fdc()
drive<0 ==> new_fdc = current_fdc
Note that current_drive is not used in this code part and may even not
match a unit belonging to current_fdc. Instead of passing -1 we can
simply pass the first drive of the FDC being initialized, which is even
cleaner as it will allow the function chain above to consistently assign
both variables.
Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
The locking in the driver is far from being obvious, with unlocking
automatically happening at end of operations scheduled by interrupt,
especially for the error paths where one does not necessarily expect
that such an interrupt may be triggered. Let's add a few comments
about what to expect at certain places to avoid misdetecting bugs
which are not.
Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to
iterate on the global variable while setting up or freeing resources.
Now that they exclusively rely on functions which take the fdc as an
argument, so let's not touch the global one anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the drive is passed in argument so that the function does not
use current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
