Add space around operator '&'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '&' (ctx:VxV)
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space around operator '|'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '|' (ctx:VxV)
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space around operator '+'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '+' (ctx:VxV)
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The while() loop will only exit in a return or a goto ask_for_joinbss,
which means it will never break and execute the return after it.
Removing return _FAIL since it is dead code.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to mlme_linux.c that fixes up following warning
reported by checkpatch.pl :
-Block comments use a trailing */ on a separate line
Signed-off-by: Punit Vara <punitvara@gmailc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue where a comparison had the constant on the
left side of the test instead of being on the right side of it.
Signed-off-by: Samuel Dominguez Lorenzo <yysamueldominguez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BIT() macro is already defined in bitops.h,
remove duplicate definitions.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using 'extern' is not necessary for function prototypes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the value to a name that conforms to Linux coding style.
"rates" is equally expressive in this context, and I have left alone
a comment and function name that describe the rates as supported rates.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coding style fix.
Get rid of typedefs NDIS_802_11_RATES and NDIS_802_11_RATES_EX
Undo any casting that was done as a result of the typedef.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename r8712_get_ndis_wlan_bssid_ex_sz() to r8712_get_wlan_bssid_ex_sz(),
which corresponds to the struct whose size it measures.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct ndis_wlan_bssid_ex is a doppelganger of struct wlan_bssid_ex,
and is used about a third as often.
Switch all instances to wlan_bssid_ex, and remove ndis_wlan_bssid_ex
This also gets rid of a use of typedef NDIS_802_11_RATES_EX
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove wrapper structs that just wrap struct ndis_wlan_bssid_ex,
and are unused.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The old comment refers to a typedef name which is being removed,
and to a style of calculation which is no longer being used.
It falsely states that IELength is variable length, instead of IEs.
Change comment to simply state that the IEs field is a buffer of
variable size and that IELength refers to the current size.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
replace item-by-item size calculation of a struct
with the size of the struct.
This gets rid of a use of typedef NDIS_802_11_RATES_EX
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
r8712_get_ndis_wlan_bssid_ex_sz has a "6 * sizeof(unsigned long)"
where the underlying struct has a 6 * unsigned char.
Simplify the calculation by just subtracting the variable part from
the size of the struct.
This also gets rid of a use of typedef NDIS_802_11_RATES_EX
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable "u32 c" always re-initialize in for loop.
Initialized value of "u32 c" is not used in function
and is redundant, hence removed.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sunil Shahu <shshahu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch.pl warning.
WARNING: else is not generally useful after a break or return
Signed-off-by: Dogukan Ergun <dogukan.ergun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix reported by coccinelle compressing last two lines with single return
call
Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The loadparam() function cannot fail, it's called only once and its return
value is ignored there.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"step 2" does mean much as there is no "step 1" stated anywhere...
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With an RTL8191SU USB adaptor, sometimes the hints for a fragmented
packet are set, but the packet length is too large. Allocate enough
space to prevent memory corruption and a resulting kernel panic [1].
[1] http://www.spinics.net/lists/linux-wireless/msg136546.html
Cc: <stable@vger.kernel.org>
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
del_timer_sync() is not to be called in the interrupt context unless
the timer is irqsafe. but most of the functions where commits
6501c8e7d8 and 382d020f44 touched were called in interrupt
context. And as a result the WARN_ON was getting triggered. Changed
to del_timer() in places which were called from interrupt.
Fixes: 382d020f44 ("Staging: rtl8712: Eliminate use of _cancel_timer"
Fixes: 6501c8e7d8 ("Staging: rtl8712: Eliminate use of _cancel_timer_ex")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=97711
Reported-by: Arek Rusniak <arek.rusi@gmail.com>
Tested-by: Arek Rusniak <arek.rusi@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes Warning encounter this by applying checkpatch.pl against this file:
Prefer ether_addr_copy() over memcpy() if the Ethernet addresses
are __aligned(2)
pahole output for respective structures:
- addr->sa_data
struct sockaddr {
sa_family_t sa_family; /* 0 2 */
char sa_data[14]; /* 2 14 */
/* size: 16, cachelines: 1, members: 2 */
/* last cacheline: 16 bytes */
};
- pnetdev->dev_addr
dev_addr is interface address infor from generic net_device structure
which is properly aligned and have some patches with this change as well.
"staging: rtl8712: fix Prefer ether_addr_copy() over memcpy()"
(sha1: 36e4d8826b)
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are all defined as a part of the standard and should not be
duplicated on a per-driver basis. Use the global ones and delete the
local ones.
It seems that ieee80211 was already included everywhere it was needed,
since no explicit include <...> were needed to be added in order to
preserve getting a successful compile.
This isn't the totality of duplicated data removed, but it is a start.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If memdup_user() fails then "pparmbuf" is an error pointer and we can't
pass it to kfree(). I changed the "goto _r871x_mp_ioctl_hdl_exit" to a
direct return.
I changed the earlier goto to a direct return as well for consistency
and removed the "pparmbuf = NULL" initializer since it's no longer
needed.
Fixes: 45de432775 ('Staging: rtl8712: Use memdup_user() instead of copy_from_user()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result of netdev_priv is already implicitly cast to the type of the
left side of the assignment.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T *x;
@@
x =
- (T *)
netdev_priv(...)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete duplicated argument to | for the state argument in
the _clr_fwstate_() function call as it is redundant.
Detected with coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use memdup_user() to avoid its duplicated implementation and simplify
code. memdup_user() uses GFP_KERNEL instead of GFP_ATOMIC,
which is valid because copy_from_user() might sleep and it's useless
to make the allocation atomic. Found with coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following checkpatch.pl warning:
WARNING: __constant_cpu_to_le16 should be cpu_to_le16
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check if kmalloc succeded before using the pointer in memcpy.
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
else after return generally is not useful. This patch removes else after return
statement. Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use timer API function del_timer_sync instead of driver
specific function _cancel_timer as besides deactivating
a timer, it also ensures that the timer is stopped on all
CPUs before the driver exists. Also, variables
timer_cancelled and bool are removed as they are no longer
needed.
@a@
expression x;
identifier y;
@@
- _cancel_timer (&x, &y);
+ del_timer_sync (&x);
@@type T; identifier a.y;@@
- T y;
...when != y
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use timer API function del_timer_sync instead of driver
specific function _cancel_timer_ex as besides deactivating
a timer, it ensures that the timer is stopped on all
CPUs before the driver exists. Also, definition of function
_cancel_timer_ex is removed as it is no longer needed after
this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x; @@
- _cancel_timer_ex (&x);
+ del_timer_sync (&x);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using addressof and then casting to the original type is unneeded.
So these casts can be removed.
Issue detected via Coccinelle script.
Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parentheses around the right side of an assignment statement are
unnecessary and hence removed. Coccinelle was used to produce the
patch:
@rule1@
identifier x,y;
constant c;
@@
(
x =
-(
y << c
-)
;
|
x =
-(
y >> c
-)
;
|
x =
-(
y + c
-)
;
|
x =
-(
y - c
-)
;
)
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that defines the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of API function setup_timer
instead of driver specific function _init_timer as it is
the preferred and standard way to setup and set the timer.
To be compatible with the change, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
