When we log an inode, we format the "log inode" core and set an LSN
in that inode core. We do that via xfs_inode_item_format_core(),
which calls:
xfs_inode_to_log_dinode(ip, dic, ip->i_itemp->ili_item.li_lsn);
to format the log inode. It writes the LSN from the inode item into
the log inode, and if recovery decides the inode item needs to be
replayed, it recovers the log inode LSN field and writes it into the
on disk inode LSN field.
Now this might seem like a reasonable thing to do, but it is wrong
on multiple levels. Firstly, if the item is not yet in the AIL,
item->li_lsn is zero. i.e. the first time the inode it is logged and
formatted, the LSN we write into the log inode will be zero. If we
only log it once, recovery will run and can write this zero LSN into
the inode.
This means that the next time the inode is logged and log recovery
runs, it will *always* replay changes to the inode regardless of
whether the inode is newer on disk than the version in the log and
that violates the entire purpose of recording the LSN in the inode
at writeback time (i.e. to stop it going backwards in time on disk
during recovery).
Secondly, if we commit the CIL to the journal so the inode item
moves to the AIL, and then relog the inode, the LSN that gets
stamped into the log inode will be the LSN of the inode's current
location in the AIL, not it's age on disk. And it's not the LSN that
will be associated with the current change. That means when log
recovery replays this inode item, the LSN that ends up on disk is
the LSN for the previous changes in the log, not the current
changes being replayed. IOWs, after recovery the LSN on disk is not
in sync with the LSN of the modifications that were replayed into
the inode. This, again, violates the recovery ordering semantics
that on-disk writeback LSNs provide.
Hence the inode LSN in the log dinode is -always- invalid.
Thirdly, recovery actually has the LSN of the log transaction it is
replaying right at hand - it uses it to determine if it should
replay the inode by comparing it to the on-disk inode's LSN. But it
doesn't use that LSN to stamp the LSN into the inode which will be
written back when the transaction is fully replayed. It uses the one
in the log dinode, which we know is always going to be incorrect.
Looking back at the change history, the inode logging was broken by
commit 93f958f9c4 ("xfs: cull unnecessary icdinode fields") way
back in 2016 by a stupid idiot who thought he knew how this code
worked. i.e. me. That commit replaced an in memory di_lsn field that
was updated only at inode writeback time from the inode item.li_lsn
value - and hence always contained the same LSN that appeared in the
on-disk inode - with a read of the inode item LSN at inode format
time. CLearly these are not the same thing.
Before 93f958f9c4, the log recovery behaviour was irrelevant,
because the LSN in the log inode always matched the on-disk LSN at
the time the inode was logged, hence recovery of the transaction
would never make the on-disk LSN in the inode go backwards or get
out of sync.
A symptom of the problem is this, caught from a failure of
generic/482. Before log recovery, the inode has been allocated but
never used:
xfs_db> inode 393388
xfs_db> p
core.magic = 0x494e
core.mode = 0
....
v3.crc = 0x99126961 (correct)
v3.change_count = 0
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jan 1 10:00:00 1970
v3.crtime.nsec = 0
After log recovery:
xfs_db> p
core.magic = 0x494e
core.mode = 020444
....
v3.crc = 0x23e68f23 (correct)
v3.change_count = 2
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jul 22 17:03:03 2021
v3.crtime.nsec = 751000000
...
You can see that the LSN of the on-disk inode is 0, even though it
clearly has been written to disk. I point out this inode, because
the generic/482 failure occurred because several adjacent inodes in
this specific inode cluster were not replayed correctly and still
appeared to be zero on disk when all the other metadata (inobt,
finobt, directories, etc) indicated they should be allocated and
written back.
The fix for this is two-fold. The first is that we need to either
revert the LSN changes in 93f958f9c4 or stop logging the inode LSN
altogether. If we do the former, log recovery does not need to
change but we add 8 bytes of memory per inode to store what is
largely a write-only inode field. If we do the latter, log recovery
needs to stamp the on-disk inode in the same manner that inode
writeback does.
I prefer the latter, because we shouldn't really be trying to log
and replay changes to the on disk LSN as the on-disk value is the
canonical source of the on-disk version of the inode. It also
matches the way we recover buffer items - we create a buf_log_item
that carries the current recovery transaction LSN that gets stamped
into the buffer by the write verifier when it gets written back
when the transaction is fully recovered.
However, this might break log recovery on older kernels even more,
so I'm going to simply ignore the logged value in recovery and stamp
the on-disk inode with the LSN of the transaction being recovered
that will trigger writeback on transaction recovery completion. This
will ensure that the on-disk inode LSN always reflects the LSN of
the last change that was written to disk, regardless of whether it
comes from log recovery or runtime writeback.
Fixes: 93f958f9c4 ("xfs: cull unnecessary icdinode fields")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Before waiting on a iclog in xfs_log_force_lsn(), we don't check to
see if the iclog has already been completed and the contents on
stable storage. We check for completed iclogs in xfs_log_force(), so
we should do the same thing for xfs_log_force_lsn().
This fixed some random up-to-30s pauses seen in unmounting
filesystems in some tests. A log force ends up waiting on completed
iclog, and that doesn't then get flushed (and hence the log force
get completed) until the background log worker issues a log force
that flushes the iclog in question. Then the unmount unblocks and
continues.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
After fixing the tail_lsn vs cache flush race, generic/482 continued
to fail in a similar way where cache flushes were missing before
iclog FUA writes. Tracing of iclog state changes during the fsstress
workload portion of the test (via xlog_iclog* events) indicated that
iclog writes were coming from two sources - CIL pushes and log
forces (due to fsync/O_SYNC operations). All of the cases where a
recovery problem was triggered indicated that the log force was the
source of the iclog write that was not preceeded by a cache flush.
This was an oversight in the modifications made in commit
eef983ffea ("xfs: journal IO cache flush reductions"). Log forces
for fsync imply a data device cache flush has been issued if an
iclog was flushed to disk and is indicated to the caller via the
log_flushed parameter so they can elide the device cache flush if
the journal issued one.
The change in eef983ffea results in iclogs only issuing a cache
flush if XLOG_ICL_NEED_FLUSH is set on the iclog, but this was not
added to the iclogs that the log force code flushes to disk. Hence
log forces are no longer guaranteeing that a cache flush is issued,
hence opening up a potential on-disk ordering failure.
Log forces should also set XLOG_ICL_NEED_FUA as well to ensure that
the actual iclogs it forces to the journal are also on stable
storage before it returns to the caller.
This patch introduces the xlog_force_iclog() helper function to
encapsulate the process of taking a reference to an iclog, switching
its state if WANT_SYNC and flushing it to stable storage correctly.
Both xfs_log_force() and xfs_log_force_lsn() are converted to use
it, as is xlog_unmount_write() which has an elaborate method of
doing exactly the same "write this iclog to stable storage"
operation.
Further, if the log force code needs to wait on a iclog in the
WANT_SYNC state, it needs to ensure that iclog also results in a
cache flush being issued. This covers the case where the iclog
contains the commit record of the CIL flush that the log force
triggered, but it hasn't been written yet because there is still an
active reference to the iclog.
Note: this whole cache flush whack-a-mole patch is a result of log
forces still being iclog state centric rather than being CIL
sequence centric. Most of this nasty code will go away in future
when log forces are converted to wait on CIL sequence push
completion rather than iclog completion. With the CIL push algorithm
guaranteeing that the CIL checkpoint is fully on stable storage when
it completes, we no longer need to iterate iclogs and push them to
ensure a CIL sequence push has completed and so all this nasty iclog
iteration and flushing code will go away.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We force iclogs in several places - we need them all to have the
same cache flush semantics, so start by factoring out the iclog
force into a common helper.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There is a race between the new CIL async data device metadata IO
completion cache flush and the log tail in the iclog the flush
covers being updated. This can be seen by repeating generic/482 in a
loop and eventually log recovery fails with a failures such as this:
XFS (dm-3): Starting recovery (logdev: internal)
XFS (dm-3): bad inode magic/vsn daddr 228352 #0 (magic=0)
XFS (dm-3): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x37c00 xfs_inode_buf_verify
XFS (dm-3): Unmount and run xfs_repair
XFS (dm-3): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (dm-3): metadata I/O error in "xlog_recover_items_pass2+0x55/0xc0" at daddr 0x37c00 len 32 error 117
Analysis of the logwrite replay shows that there were no writes to
the data device between the FUA @ write 124 and the FUA at write @
125, but log recovery @ 125 failed. The difference was the one log
write @ 125 moved the tail of the log forwards from (1,8) to (1,32)
and so the inode create intent in (1,8) was not replayed and so the
inode cluster was zero on disk when replay of the first inode item
in (1,32) was attempted.
What this meant was that the journal write that occurred at @ 125
did not ensure that metadata completed before the iclog was written
was correctly on stable storage. The tail of the log moved forward,
so IO must have been completed between the two iclog writes. This
means that there is a race condition between the unconditional async
cache flush in the CIL push work and the tail LSN that is written to
the iclog. This happens like so:
CIL push work AIL push work
------------- -------------
Add to committing list
start async data dev cache flush
.....
<flush completes>
<all writes to old tail lsn are stable>
xlog_write
.... push inode create buffer
<start IO>
.....
xlog_write(commit record)
.... <IO completes>
log tail moves
xlog_assign_tail_lsn()
start_lsn == commit_lsn
<no iclog preflush!>
xlog_state_release_iclog
__xlog_state_release_iclog()
<writes *new* tail_lsn into iclog>
xlog_sync()
....
submit_bio()
<tail in log moves forward without flushing written metadata>
Essentially, this can only occur if the commit iclog is issued
without a cache flush. If the iclog bio is submitted with
REQ_PREFLUSH, then it will guarantee that all the completed IO is
one stable storage before the iclog bio with the new tail LSN in it
is written to the log.
IOWs, the tail lsn that is written to the iclog needs to be sampled
*before* we issue the cache flush that guarantees all IO up to that
LSN has been completed.
To fix this without giving up the performance advantage of the
flush/FUA optimisations (e.g. g/482 runtime halves with 5.14-rc1
compared to 5.13), we need to ensure that we always issue a cache
flush if the tail LSN changes between the initial async flush and
the commit record being written. THis requires sampling the tail_lsn
before we start the flush, and then passing the sampled tail LSN to
xlog_state_release_iclog() so it can determine if the the tail LSN
has changed while writing the checkpoint. If the tail LSN has
changed, then it needs to set the NEED_FLUSH flag on the iclog and
we'll issue another cache flush before writing the iclog.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Fold __xlog_state_release_iclog into its only caller to prepare
make an upcoming fix easier.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The recent journal flush/FUA changes replaced the flushing of the
data device on every iclog write with an up-front async data device
cache flush. Unfortunately, the assumption of which this was based
on has been proven incorrect by the flush vs log tail update
ordering issue. As the fix for that issue uses the
XLOG_ICL_NEED_FLUSH flag to indicate that data device needs a cache
flush, we now need to (once again) ensure that an iclog write to
external logs that need a cache flush to be issued actually issue a
cache flush to the data device as well as the log device.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We incorrectly flush the log device instead of the data device when
trying to ensure metadata is correctly on disk before writing the
unmount record.
Fixes: eef983ffea ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we encounter a directory that has been configured to pass on an
extent size hint to a new realtime file and the hint isn't an integer
multiple of the rt extent size, we should flag the hint for
administrative review because that is a misconfiguration (that other
parts of the kernel will fix automatically).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During a realtime grow operation, we run a single transaction for each
rt bitmap block added to the filesystem. This means that each step has
to be careful to increase sb_rblocks appropriately.
Fix the integer overflow error in this calculation that can happen when
the extent size is very large. Found by running growfs to add a rt
volume to a filesystem formatted with a 1g rt extent size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Improve the checking at the start of a realtime grow operation so that
we avoid accidentally set a new extent size that is too large and avoid
adding an rt volume to a filesystem with rmap or reflink because we
don't support rt rmap or reflink yet.
While we're at it, separate the checks so that we're only testing one
aspect at a time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 603f000b15 changed xfs_ioctl_setattr_check_extsize to reject an
attempt to set an EXTSZINHERIT extent size hint on a directory with
RTINHERIT set if the hint isn't a multiple of the realtime extent size.
However, I have recently discovered that it is possible to change the
realtime extent size when adding a rt device to a filesystem, which
means that the existence of directories with misaligned inherited hints
is not an accident.
As a result, it's possible that someone could have set a valid hint and
added an rt volume with a different rt extent size, which invalidates
the ondisk hints. After such a sequence, FSGETXATTR will report a
misaligned hint, which FSSETXATTR will trip over, causing confusion if
the user was doing the usual GET/SET sequence to change some other
attribute. Change xfs_fill_fsxattr to omit the hint if it isn't aligned
properly.
Fixes: 603f000b15 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While auditing the realtime growfs code, I realized that the GROWFSRT
ioctl (and by extension xfs_growfs) has always allowed sysadmins to
change the realtime extent size when adding a realtime section to the
filesystem. Since we also have always allowed sysadmins to set
RTINHERIT and EXTSZINHERIT on directories even if there is no realtime
device, this invalidates the premise laid out in the comments added in
commit 603f000b15.
In other words, this is not a case of inadequate metadata validation.
This is a case of nearly forgotten (and apparently untested) but
supported functionality. Update the comments to reflect what we've
learned, and remove the log message about correcting the misalignment.
Fixes: 603f000b15 ("xfs: validate extsz hints against rt extent size when rtinherit is set")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While running xfs/168, I noticed a second source of post-shrink
corruption errors causing shutdowns.
Let's say that directory B has a low inode number and is a child of
directory A, which has a high number. If B is empty but open, and
unlinked from A, B's dotdot link continues to point to A. If A is then
unlinked and the filesystem shrunk so that A is no longer a valid inode,
a subsequent AIL push of B will trip the inode verifiers because the
dotdot entry points outside of the filesystem.
To avoid this problem, reset B's dotdot entry to the root directory when
unlinking directories, since the root directory cannot be removed.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
While running xfs/168, I noticed occasional write verifier shutdowns
involving inodes at the very end of the filesystem. Existing inode
btree validation code checks that all inode clusters are fully contained
within the filesystem.
However, due to inadequate checking in the fs shrink code, it's possible
that there could be a sparse inode cluster at the end of the filesystem
where the upper inodes of the cluster are marked as holes and the
corresponding blocks are free. In this case, the last blocks in the AG
are listed in the bnobt. This enables the shrink to proceed but results
in a filesystem that trips the inode verifiers. Fix this by disallowing
the shrink.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
-----BEGIN PGP SIGNATURE-----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=7Jd9
-----END PGP SIGNATURE-----
Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
-----BEGIN PGP SIGNATURE-----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=74oU
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.14-2021-07-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into this merge.
One fixes a regression introduced in this release, others are just
generic fixes, mostly related to handling fallback task_work"
* tag 'io_uring-5.14-2021-07-09' of git://git.kernel.dk/linux-block:
io_uring: remove dead non-zero 'poll' check
io_uring: mitigate unlikely iopoll lag
io_uring: fix drain alloc fail return code
io_uring: fix exiting io_req_task_work_add leaks
io_uring: simplify task_work func
io_uring: fix stuck fallback reqs
-----BEGIN PGP SIGNATURE-----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=gHse
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().
Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Support for faster packet signing (using GMAC instead of CMAC) can
now be negotiated to some newer servers, including Windows.
See MS-SMB2 section 2.2.3.17.
This patch adds support for sending the new negotiate context
with the first of three supported signing algorithms (AES-CMAC)
and decoding the response. A followon patch will add support
for sending the other two (including AES-GMAC, which is fastest)
and changing the signing algorithm used based on what was
negotiated.
To allow the client to request GMAC signing set module parameter
"enable_negotiate_signing" to 1.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Fix for a race xattr list and modification
- Various minor fixes (spelling, return codes, ...)
-----BEGIN PGP SIGNATURE-----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=2Wk7
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBIFS updates from Richard Weinberger:
- Fix for a race xattr list and modification
- Various minor fixes (spelling, return codes, ...)
* tag 'for-linus-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Set/Clear I_LINKABLE under i_lock for whiteout inode
ubifs: Fix spelling mistakes
ubifs: Remove ui_mutex in ubifs_xattr_get and change_xattr
ubifs: Fix races between xattr_{set|get} and listxattr operations
ubifs: fix snprintf() checking
ubifs: journal: Fix error return code in ubifs_jnl_write_inode()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmDnU2AACgkQ8vlZVpUN
gaOBIAgApIAIeGbppf7aFjRN4h4wxfRpr7w6lux3GVmz7D+6djRi21X5dT5xq01m
u6DkLAcKrCATIidyP6qHlvBbxxcPt2PX1FcQbruj9WcnSng1Ngl7RW8BEqp/eIRo
Nb7MY0pg8HIJVMEniWQcdEjFWKDL3ksWR9+X3V3nhSzp+0kXFF1ySjk+TWi/ZGSn
T/Q1sEyeUOiVfV75cIW5JbKoJEgvCvrclFvGJLYVcIAYeqJfQKQ0+tlkhDeYnWfQ
nZgh1UU350bO629LGIhbRAkLbAloEb0d57mOQCrATo0JFrAZ52+0ZCkrTXtIyoOF
TUILVf3zsqgdO8HLDkbH1G+lGn9WOA==
=qU+W
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 regression and bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: inline jbd2_journal_[un]register_shrinker()
ext4: fix flags validity checking for EXT4_IOC_CHECKPOINT
ext4: fix possible UAF when remounting r/o a mmp-protected file system
ext4: use ext4_grp_locked_error in mb_find_extent
ext4: fix WARN_ON_ONCE(!buffer_uptodate) after an error writing the superblock
Revert "ext4: consolidate checks for resize of bigalloc into ext4_resize_begin"
Xiubo, two patchsets from Jeff that begin to untangle some heavyweight
blocking locks in the filesystem and a bunch of code cleanups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmDnVcgTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+d9CACqbWorDRCksqBB40muthHfgArYAc8A
WZEvrcieymV6P+A3KJj9wtNeRgT8iSdJDweD/5Yl0ZfZUx3i0x78600fe5cls3u3
XiX154G8KZpnAQbuDXnSny+4PiEQMkbfL3Zk++TSClBWb2PqYF/LvEsCfdBIuHYm
BRMTpZ9rGWD+WWnz1iroubhMfmUTdyGzsgA4zjBNr46d2k1gZVviB0TDsEfhC8lP
qio7IABkIWmvVJk9MCwp4JJQMMKuaN9DRddoA2Q/NZzevxHRUWCvW5a6o6vpO1+W
d74Zzf9kbwCy+qbO1YpS0yrpNXP2IBVa0ZPNChOVDluPTmgVyQmrRjnU
=wXsA
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.14-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have new filesystem client metrics for reporting I/O sizes from
Xiubo, two patchsets from Jeff that begin to untangle some heavyweight
blocking locks in the filesystem and a bunch of code cleanups"
* tag 'ceph-for-5.14-rc1' of git://github.com/ceph/ceph-client:
ceph: take reference to req->r_parent at point of assignment
ceph: eliminate ceph_async_iput()
ceph: don't take s_mutex in ceph_flush_snaps
ceph: don't take s_mutex in try_flush_caps
ceph: don't take s_mutex or snap_rwsem in ceph_check_caps
ceph: eliminate session->s_gen_ttl_lock
ceph: allow ceph_put_mds_session to take NULL or ERR_PTR
ceph: clean up locking annotation for ceph_get_snap_realm and __lookup_snap_realm
ceph: add some lockdep assertions around snaprealm handling
ceph: decoding error in ceph_update_snap_realm should return -EIO
ceph: add IO size metrics support
ceph: update and rename __update_latency helper to __update_stdev
ceph: simplify the metrics struct
libceph: fix doc warnings in cls_lock_client.c
libceph: remove unnecessary ret variable in ceph_auth_init()
libceph: fix some spelling mistakes
libceph: kill ceph_none_authorizer::reply_buf
ceph: make ceph_queue_cap_snap static
ceph: make ceph_netfs_read_ops static
ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
Highlights include:
Stable fixes:
- Two sunrpc fixes for deadlocks involving privileged rpc_wait_queues
Bugfixes
- SUNRPC: Avoid a KASAN slab-out-of-bounds bug in xdr_set_page_base()
- SUNRPC: prevent port reuse on transports which don't request it.
- NFSv3: Fix memory leak in posix_acl_create()
- NFS: Various fixes to attribute revalidation timeouts
- NFSv4: Fix handling of non-atomic change attribute updates
- NFSv4: If a server is down, don't cause mounts to other servers to
hang as well
- pNFS: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
- NFS: Fix mount failures due to incorrect setting of the has_sec_mnt_opts
filesystem flag
- NFS: Ensure nfs_readpage returns promptly when an internal error occurs
- NFS: Fix fscache read from NFS after cache error
- pNFS: Various bugfixes around the LAYOUTGET operation
Features
- Multiple patches to add support for fcntl() leases over NFSv4.
- A sysfs interface to display more information about the various
transport connections used by the RPC client
- A sysfs interface to allow a suitably privileged user to offline a
transport that may no longer point to a valid server
- A sysfs interface to allow a suitably privileged user to change the
server IP address used by the RPC client
-----BEGIN PGP SIGNATURE-----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=NaOI
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- Multiple patches to add support for fcntl() leases over NFSv4.
- A sysfs interface to display more information about the various
transport connections used by the RPC client
- A sysfs interface to allow a suitably privileged user to offline a
transport that may no longer point to a valid server
- A sysfs interface to allow a suitably privileged user to change the
server IP address used by the RPC client
Stable fixes:
- Two sunrpc fixes for deadlocks involving privileged rpc_wait_queues
Bugfixes:
- SUNRPC: Avoid a KASAN slab-out-of-bounds bug in xdr_set_page_base()
- SUNRPC: prevent port reuse on transports which don't request it.
- NFSv3: Fix memory leak in posix_acl_create()
- NFS: Various fixes to attribute revalidation timeouts
- NFSv4: Fix handling of non-atomic change attribute updates
- NFSv4: If a server is down, don't cause mounts to other servers to
hang as well
- pNFS: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT
- NFS: Fix mount failures due to incorrect setting of the
has_sec_mnt_opts filesystem flag
- NFS: Ensure nfs_readpage returns promptly when an internal error
occurs
- NFS: Fix fscache read from NFS after cache error
- pNFS: Various bugfixes around the LAYOUTGET operation"
* tag 'nfs-for-5.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (46 commits)
NFSv4/pNFS: Return an error if _nfs4_pnfs_v3_ds_connect can't load NFSv3
NFSv4/pNFS: Don't call _nfs4_pnfs_v3_ds_connect multiple times
NFSv4/pnfs: Clean up layout get on open
NFSv4/pnfs: Fix layoutget behaviour after invalidation
NFSv4/pnfs: Fix the layout barrier update
NFS: Fix fscache read from NFS after cache error
NFS: Ensure nfs_readpage returns promptly when internal error occurs
sunrpc: remove an offlined xprt using sysfs
sunrpc: provide showing transport's state info in the sysfs directory
sunrpc: display xprt's queuelen of assigned tasks via sysfs
sunrpc: provide multipath info in the sysfs directory
NFSv4.1 identify and mark RPC tasks that can move between transports
sunrpc: provide transport info in the sysfs directory
SUNRPC: take a xprt offline using sysfs
sunrpc: add dst_attr attributes to the sysfs xprt directory
SUNRPC for TCP display xprt's source port in sysfs xprt_info
SUNRPC query transport's source port
SUNRPC display xprt's main value in sysfs's xprt_info
SUNRPC mark the first transport
sunrpc: add add sysfs directory per xprt under each xprt_switch
...
In this round, we've improved the compression support especially for Android
such as allowing compression for mmap files, replacing the immutable bit with
internal bit to prohibits data writes explicitly, and adding a mount option,
"compress_cache", to improve random reads. And, we added "readonly" feature to
compact the partition w/ compression enabled, which will be useful for Android
RO partitions.
Enhancement:
- support compression for mmap file
- use an f2fs flag instead of IMMUTABLE bit for compression
- support RO feature w/ extent_cache
- fully support swapfile with file pinning
- improve atgc tunability
- add nocompress extensions to unselect files for compression
Bug fix:
- fix false alaram on iget failure during GC
- fix race condition on global pointers when there are multiple f2fs instances
- add MODULE_SOFTDEP for initramfs
As usual, we've also cleaned up some places for better code readability.
(e.g., sysfs/feature, debugging messages, slab cache name, and docs)
-----BEGIN PGP SIGNATURE-----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=1IHL
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've improved the compression support especially for
Android such as allowing compression for mmap files, replacing the
immutable bit with internal bit to prohibits data writes explicitly,
and adding a mount option, "compress_cache", to improve random reads.
And, we added "readonly" feature to compact the partition w/
compression enabled, which will be useful for Android RO partitions.
Enhancements:
- support compression for mmap file
- use an f2fs flag instead of IMMUTABLE bit for compression
- support RO feature w/ extent_cache
- fully support swapfile with file pinning
- improve atgc tunability
- add nocompress extensions to unselect files for compression
Bug fixes:
- fix false alaram on iget failure during GC
- fix race condition on global pointers when there are multiple f2fs
instances
- add MODULE_SOFTDEP for initramfs
As usual, we've also cleaned up some places for better code
readability (e.g., sysfs/feature, debugging messages, slab cache
name, and docs)"
* tag 'f2fs-for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: drop dirty node pages when cp is in error status
f2fs: initialize page->private when using for our internal use
f2fs: compress: add nocompress extensions support
MAINTAINERS: f2fs: update my email address
f2fs: remove false alarm on iget failure during GC
f2fs: enable extent cache for compression files in read-only
f2fs: fix to avoid adding tab before doc section
f2fs: introduce f2fs_casefolded_name slab cache
f2fs: swap: support migrating swapfile in aligned write mode
f2fs: swap: remove dead codes
f2fs: compress: add compress_inode to cache compressed blocks
f2fs: clean up /sys/fs/f2fs/<disk>/features
f2fs: add pin_file in feature list
f2fs: Advertise encrypted casefolding in sysfs
f2fs: Show casefolding support only when supported
f2fs: support RO feature
f2fs: logging neatening
f2fs: introduce FI_COMPRESS_RELEASED instead of using IMMUTABLE bit
f2fs: compress: remove unneeded preallocation
f2fs: atgc: export entries for better tunability via sysfs
...
Colin reports that Coverity complains about checking for poll being
non-zero after having dereferenced it multiple times. This is a valid
complaint, and actually a leftover from back when this code was based
on the aio poll code.
Kill the redundant check.
Link: https://lore.kernel.org/io-uring/fe70c532-e2a7-3722-58a1-0fa4e5c5ff2c@canonical.com/
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the nice helpers to initialize and the uid/gid/cred_uid when passed as mount arguments.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have requests like IORING_OP_FILES_UPDATE that don't go through
->iopoll_list but get completed in place under ->uring_lock, and so
after dropping the lock io_iopoll_check() should expect that some CQEs
might have get completed in a meanwhile.
Currently such events won't be accounted in @nr_events, and the loop
will continue to poll even if there is enough of CQEs. It shouldn't be a
problem as it's not likely to happen and so, but not nice either. Just
return earlier in this case, it should be enough.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66ef932cc66a34e3771bbae04b2953a8058e9d05.1625747741.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we fail to return an error if the NFSv3 module failed to load
when we're trying to connect to a pNFS data server.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After we grab the lock in nfs4_pnfs_ds_connect(), there is no check for
whether or not ds->ds_clp has already been initialised, so we can end up
adding the same transports multiple times.
Fixes: fc821d5920 ("pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cache the layout in the arguments so we don't have to keep looking it up
from the inode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the layout gets invalidated, we should wait for any outstanding
layoutget requests for that layout to complete, and we should resend
them only after re-establishing the layout stateid.
Fixes: d29b468da4 ("pNFS/NFSv4: Improve rejection of out-of-order layouts")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we have multiple outstanding layoutget requests, the current code to
update the layout barrier assumes that the outstanding layout stateids
are updated in order. That's not necessarily the case.
Instead of using the value of lo->plh_outstanding as a guesstimate for
the window of values we need to accept, just wait to update the window
until we're processing the last one. The intention here is just to
ensure that we don't process 2^31 seqid updates without also updating
the barrier.
Fixes: 1bcf34fdac ("pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Earlier commits refactored some NFS read code and removed
nfs_readpage_async(), but neglected to properly fixup
nfs_readpage_from_fscache_complete(). The code path is
only hit when something unusual occurs with the cachefiles
backing filesystem, such as an IO error or while a cookie
is being invalidated.
Mark page with PG_checked if fscache IO completes in error,
unlock the page, and let the VM decide to re-issue based on
PG_uptodate. When the VM reissues the readpage, PG_checked
allows us to skip over fscache and read from the server.
Link: https://marc.info/?l=linux-nfs&m=162498209518739
Fixes: 1e83b173b2 ("NFS: Add nfs_pageio_complete_read() and remove nfs_readpage_async()")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
A previous refactoring of nfs_readpage() might end up calling
wait_on_page_locked_killable() even if readpage_async_filler() failed
with an internal error and pg_error was non-zero (for example, if
nfs_create_request() failed). In the case of an internal error,
skip over wait_on_page_locked_killable() as this is only needed
when the read is sent and an error occurs during completion handling.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In preparation for when we can re-try a task on a different transport,
identify and mark such RPC tasks as moveable. Only 4.1+ operarations can
be re-tried on a different transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The function jbd2_journal_unregister_shrinker() was getting called
twice when the file system was getting unmounted. On Power and ARM
platforms this was causing kernel crash when unmounting the file
system, when a percpu_counter was destroyed twice.
Fix this by removing jbd2_journal_[un]register_shrinker() functions,
and inlining the shrinker setup and teardown into
journal_init_common() and jbd2_journal_destroy(). This means that
ext4 and ocfs2 now no longer need to know about registering and
unregistering jbd2's shrinker.
Also, while we're at it, rename the percpu counter from
j_jh_shrink_count to j_checkpoint_jh_count, since this makes it
clearer what this counter is intended to track.
Link: https://lore.kernel.org/r/20210705145025.3363130-1-tytso@mit.edu
Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 618f003199 ("ext4: fix memory leak in
ext4_fill_super"), after the file system is remounted read-only, there
is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to
point at freed memory, which the call to ext4_stop_mmpd() can trip
over.
Fix this by only allowing kmmpd() to exit when it is stopped via
ext4_stop_mmpd().
Link: https://lore.kernel.org/r/20210707002433.3719773-1-tytso@mit.edu
Reported-by: Ye Bin <yebin10@huawei.com>
Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 PosixLock. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711520 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 RenameOpenFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711521 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
- add tracepoints for callbacks and for client creation and
destruction
- cache the mounts used for server-to-server copies
- expose callback information in /proc/fs/nfsd/clients/*/info
- don't hold locks unnecessarily while waiting for commits
- update NLM to use xdr_stream, as we have for NFSv2/v3/v4
-----BEGIN PGP SIGNATURE-----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=BQyR
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.14' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
- add tracepoints for callbacks and for client creation and destruction
- cache the mounts used for server-to-server copies
- expose callback information in /proc/fs/nfsd/clients/*/info
- don't hold locks unnecessarily while waiting for commits
- update NLM to use xdr_stream, as we have for NFSv2/v3/v4
* tag 'nfsd-5.14' of git://linux-nfs.org/~bfields/linux: (69 commits)
nfsd: fix NULL dereference in nfs3svc_encode_getaclres
NFSD: Prevent a possible oops in the nfs_dirent() tracepoint
nfsd: remove redundant assignment to pointer 'this'
nfsd: Reduce contention for the nfsd_file nf_rwsem
lockd: Update the NLMv4 SHARE results encoder to use struct xdr_stream
lockd: Update the NLMv4 nlm_res results encoder to use struct xdr_stream
lockd: Update the NLMv4 TEST results encoder to use struct xdr_stream
lockd: Update the NLMv4 void results encoder to use struct xdr_stream
lockd: Update the NLMv4 FREE_ALL arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 SHARE arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 SM_NOTIFY arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 nlm_res arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 UNLOCK arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 CANCEL arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 LOCK arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 TEST arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 void arguments decoder to use struct xdr_stream
lockd: Update the NLMv1 SHARE results encoder to use struct xdr_stream
lockd: Update the NLMv1 nlm_res results encoder to use struct xdr_stream
lockd: Update the NLMv1 TEST results encoder to use struct xdr_stream
...
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 SetFileDisposition (which is used to
unlink a file by setting the delete on close flag). This
changeset doesn't change the address but makes it slightly
clearer.
Addresses-Coverity: 711524 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the header
structure rather than from the beginning of the struct plus
4 bytes) for setting the file size using SMB1. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711525 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Otherwise, writeback is going to fall in a loop to flush dirty inode forever
before getting SBI_CLOSING.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In error cases the dentry may be NULL.
Before 20798dfe24, the encoder also checked dentry and
d_really_is_positive(dentry), but that looks like overkill to me--zero
status should be enough to guarantee a positive dentry.
This isn't the first time we've seen an error-case NULL dereference
hidden in the initialization of a local variable in an xdr encoder. But
I went back through the other recent rewrites and didn't spot any
similar bugs.
Reported-by: JianHong Yin <jiyin@redhat.com>
Reviewed-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 20798dfe24 ("NFSD: Update the NFSv3 GETACL result encoder...")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The double copy of the string is a mistake, plus __assign_str()
uses strlen(), which is wrong to do on a string that isn't
guaranteed to be NUL-terminated.
Fixes: 6019ce0742 ("NFSD: Add a tracepoint to record directory entry encoding")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
