Commit Graph

61 Commits

Author SHA1 Message Date
Jacob Pan
9d90e49da5 x86/mrst: Fix boot crash caused by incorrect pin to irq mapping
Moorestown systems crash on boot because the secondary CPU
clockevent (apbt1) will fail to request irq#1, which does not
have ioapic chip in its irq_desc[] entry.

Background:

Moorestown platform does not have ISA bus nor legacy IRQs. It
reuses the range of legacy IRQs for regular device interrupts.
The routing information of early system device IRQs (timers) are
obtained from firmware provided SFI tables. We reuse/fake MP
configuration table to facilitate IRQ setup with IOAPIC.

Maintaining a 1:1 mapping of IOAPIC pin (RTE entry) and IRQ#
makes routing information clean and easy to understand on
Moorestown. Though optional.

This patch allows SFI timer and vRTC IRQ to be treated as ISA
IRQ so that pin2irq mapping will be 1:1.

Also fixed MP table type and use macros to clearly set MP IRQ
entries. As a result, apbt timer and RTC interrupts on
Moorestown are within legacy IRQ range:

 # cat /proc/interrupts
            CPU0       CPU1
   0:      11249          0   IO-APIC-edge      apbt0
   1:          0      12271   IO-APIC-edge      apbt1
   8:        887          0   IO-APIC-fasteoi   dw_spi
  13:          0          0   IO-APIC-fasteoi   INTEL_MID_DMAC2
  14:          0          0   IO-APIC-fasteoi   rtc0

Further discussion of this patch can be found at:

  https://lkml.org/lkml/2010/6/10/70

Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: http://lkml.kernel.org/r/1302286980-21139-1-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-12 08:38:52 +02:00
Sebastian Andrzej Siewior
30d746c680 x86/ce4100: Add reg property to bridges
without the reg property Ben's new code won't find the PCI & ISA
bridge and the devices won't get the DT-node attached.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: monstr@monstr.eu
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: http://lkml.kernel.org/r/20110407121315.GA9204@linutronix.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11 17:37:02 +02:00
Linus Torvalds
8b9686ff4d Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', 'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, fpu: Fix FPU exception handling on non-SSE systems
  x86, hibernate: Initialize mmu_cr4_features during boot
  x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
  x86: visws: Fixup irq overhaul fallout

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Clean up rebalance_domains() load-balance interval calculation

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
  rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Fix cpumask leak in __setup_irq()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf probe: Fix listing incorrect line number with inline function
  perf probe: Fix to find recursively inlined function
  perf probe: Fix multiple --vars options behavior
  perf probe: Fix to remove redundant close
  perf probe: Fix to ensure function declared file
2011-04-07 12:12:58 -07:00
Feng Tang
09552b2696 x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
The sfi_mrtc_array[] only gets initialized when the sfi mrtc
table is parsed, so the vrtc_paddr should be initalized after it
too.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-07 11:27:42 +02:00
Thomas Gleixner
43a6246f9c x86: visws: Fixup irq overhaul fallout
Reported-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-04 16:51:15 +02:00
Jean Delvare
ca444564a9 x86: Stop including <linux/delay.h> in two asm header files
Stop including <linux/delay.h> in x86 header files which don't
need it. This will let the compiler complain when this header is
not included by source files when it should, so that
contributors can fix the problem before building on other
architectures starts to fail.

Credits go to Geert for the idea.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: James E.J. Bottomley <James.Bottomley@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <20110325152014.297890ec@endymion.delvare>
[ this also fixes an upstream build bug in drivers/media/rc/ite-cir.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-29 09:37:42 +02:00
Daniel Drake
adfa4bd4a8 mfd: OLPC: Clean up names to match what OLPC actually uses
The cs5535-pms cell doesn't actually need to be cloned, so we can drop that
and simply have the olpc-xo1.c driver use "cs5535-pms" directly.

Also, rename the cs5535-acpi clones to what we actually use for the (currently
out-of-tree) SCI driver.  In the process, that fixes a subtle bug in
olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not
something that actually existed.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-27 00:09:31 +01:00
Andres Salomon
fa1df69168 mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to it
Replace mfd_shared_platform_driver_register with mfd_clone_cell.  The
former was called by an mfd client, and registered both a platform driver
and device.  The latter is called by an mfd driver, and registers only a
platform device.

The downside of this is that mfd drivers need to be modified whenever
new clients are added that share a cell; the upside is that it fits
Linux's driver model better.  It's also simpler.

This also converts cs5535-mfd/olpc-xo1 from the old API.  cs5535-mfd
now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to
them via platform drivers.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-27 00:09:30 +01:00
Andres Salomon
f77289ac25 mfd: Rename mfd_shared_cell_{en,dis}able to drop the "shared" part
As requested by Samuel, there's not really any reason to have "shared"
in the name.

This also modifies the only user of the function, as well.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:03 +01:00
Andres Salomon
1310e6d638 mfd: Add sharing for cs5535 acpi/pms cells
This enables sharing of cs5535-mfd cells via the new mfd_shared_* API.
Hooks for enable/disble of resources are added, with refcounting of
resources being automatically handled so that cs5535_mfd_res_enable/disable
are only called when necessary.

Clients of cs5535-mfd (in this case, olpc-xo1.c) are also modified to
use the mfd_shared API.  The platform drivers are also renamed to
olpc-xo1-{pms,acpi}, and resource enabling/disabling is replaced
with mfd_shared API calls.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:58 +01:00
Linus Torvalds
d10902812c Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
  x86: Clean up apic.c and apic.h
  x86: Remove superflous goal definition of tsc_sync
  x86: dt: Correct local apic documentation in device tree bindings
  x86: dt: Cleanup local apic setup
  x86: dt: Fix OLPC=y/INTEL_CE=n build
  rtc: cmos: Add OF bindings
  x86: ce4100: Use OF to setup devices
  x86: ioapic: Add OF bindings for IO_APIC
  x86: dtb: Add generic bus probe
  x86: dtb: Add support for PCI devices backed by dtb nodes
  x86: dtb: Add device tree support for HPET
  x86: dtb: Add early parsing of IO_APIC
  x86: dtb: Add irq domain abstraction
  x86: dtb: Add a device tree for CE4100
  x86: Add device tree support
  x86: e820: Remove conditional early mapping in parse_e820_ext
  x86: OLPC: Make OLPC=n build again
  x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection
  x86: OLPC: Cleanup config maze completely
  x86: OLPC: Hide OLPC_OPENFIRMWARE config switch
  ...

Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
2011-03-15 20:01:36 -07:00
Linus Torvalds
5f6fb45466 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (116 commits)
  x86: Enable forced interrupt threading support
  x86: Mark low level interrupts IRQF_NO_THREAD
  x86: Use generic show_interrupts
  x86: ioapic: Avoid redundant lookup of irq_cfg
  x86: ioapic: Use new move_irq functions
  x86: Use the proper accessors in fixup_irqs()
  x86: ioapic: Use irq_data->state
  x86: ioapic: Simplify irq chip and handler setup
  x86: Cleanup the genirq name space
  genirq: Add chip flag to force mask on suspend
  genirq: Add desc->irq_data accessor
  genirq: Add comments to Kconfig switches
  genirq: Fixup fasteoi handler for oneshot mode
  genirq: Provide forced interrupt threading
  sched: Switch wait_task_inactive to schedule_hrtimeout()
  genirq: Add IRQF_NO_THREAD
  genirq: Allow shared oneshot interrupts
  genirq: Prepare the handling of shared oneshot interrupts
  genirq: Make warning in handle_percpu_event useful
  x86: ioapic: Move trigger defines to io_apic.h
  ...

Fix up trivial(?) conflicts in arch/x86/pci/xen.c due to genirq name
space changes clashing with the Xen cleanups.  The set_irq_msi() had
moved to xen_bind_pirq_msi_to_irq().
2011-03-15 19:23:40 -07:00
Linus Torvalds
869c34f520 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: ce4100: Set pci ops via callback instead of module init
  x86/mm: Fix pgd_lock deadlock
  x86/mm: Handle mm_fault_error() in kernel space
  x86: Don't check for BIOS corruption in first 64K when there's no need to
2011-03-14 15:19:09 -07:00
Sebastian Andrzej Siewior
03150171dc x86: ce4100: Set pci ops via callback instead of module init
Setting the pci ops on subsys initcall unconditionally will break
multi platform kernels on anything except ce4100.

Use x86_init.pci.init ops to call this only on real ce4100 platforms.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: sodaville@linutronix.de
LKML-Reference: <20110314093340.GA21026@www.tglx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-14 15:13:23 +01:00
Thomas Gleixner
9bbbff25b3 x86: Mark low level interrupts IRQF_NO_THREAD
These cannot be threaded.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-12 14:12:01 +01:00
Thomas Gleixner
2c778651f7 x86: Cleanup the genirq name space
genirq is switching to a consistent name space for the irq related
functions. Convert x86. Conversion was done with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-12 14:12:00 +01:00
Linus Torvalds
b5562c9a55 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Initialize the broadcast assist unit base destination node id properly
  x86, numa: Fix numa_emulation code with memory-less node0
  x86, build: Make sure mkpiggy fails on read error
2011-03-10 13:09:26 -08:00
Cliff Wickman
5471262290 x86, UV: Initialize the broadcast assist unit base destination node id properly
The BAU's initialization of the broadcast description header is
lacking the coherence domain (high bits) in the nasid.  This
causes a catastrophic system failure when running on a system
with multiple coherence domains.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1PxKBB-0005F0-3U@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-09 16:36:16 +01:00
Andres Salomon
60cba5a57b x86: OLPC: have prom_early_alloc BUG rather than return NULL
..similar to what sparc's prom_early_alloc does.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-02 13:45:18 -07:00
Thomas Gleixner
a906fdaacc x86: dt: Cleanup local apic setup
Up to now we force enable the local apic in the devicetree setup
uncoditionally and set smp_found_config unconditionally to 1 when a
devicetree blob is available. This breaks, when local apic is disabled
in the Kconfig.

Make it consistent by initializing device tree explicitely before
smp_get_config() so a non lapic configuration could be used as well.
To be functional that would require to implement PIT as an interrupt
host, but the only user of this code until now is ce4100 which
requires apics to be available. So we leave this up to those who need
it.

Tested-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-25 16:18:52 +01:00
Sebastian Andrzej Siewior
1fa4163bdc x86: ce4100: Use OF to setup devices
Use device tree information to setup IO_APIC configuration, interrupt
routing, HPET and everything else which cannot be enumerated by other
means.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:54 +01:00
Sebastian Andrzej Siewior
df2634f43f x86: dtb: Add a device tree for CE4100
History:
v1..v2:
- dropped device_type except for cpu & pci. I have the compatible string
  for pci so I can drop the device_type once it is possible
- I lowercased all compatible types. I will need to resend some patches
  which have upper case intel
- The cpu had the same compatible string as the soc node. So I added to
  the soc node -immr for internel memory mapped registers.
- I added generic names for all parts.
- I reworked the i2c bars matching the way you suggested. I added a
  compatible node for the PCI device which only the PCI ids in its
  compatible string. The bars (each represents a complete i2c
  controller) have a "intel,ce4100-i2c-controller" compatible node. It
  is not used by the driver.
  The driver is probed via PCI ids (by the pci subsystem not OF) and
  matches the bar address against the ressource in the child node. Once
  there is a hit the node is attached.
- The SPI driver is also probed via pci. However I also attached a
  compatible property based on PCI ids

v2..v3:
- intel,ce4100-immr become intel,ce4100-cp. cp stands for core
  peripherals. The Atom data sheet talks here about ACPI devices. Since
  we don't have ACPI this does not apply here.
- The interrupt map is gone. There are now plenty of device nodes.
- The "unit address string" got fixed, it uses not DD,V format.

v3..v4:
- added descriptions for compatible nodes introduced here:
  - intel,ce4100-ioapic
  - intel,ce4100-lapic
  - intel,ce4100-hpet
  - intel,ce4100
  - intel,ce4100-cp
  - intel,ce4100-pci
- added a description about I2C controller magic.
- Added gpio-controller and gpio-cells property to gpio devices. Those
  properties are not (yet) used.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23 22:27:52 +01:00
Thomas Gleixner
c2a941fadb x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection
OLPC_OPENFIRMWARE_DT is just there to be selected by OLPC and selects
OF_PROMTREE. So let OLPC select OF_PROMTREE and remove that extra
config indirection. Fixup code and Makefile and use CONFIG_OF_PROMTREE
instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>
2011-02-23 10:40:45 +01:00
Thomas Gleixner
dc3119e700 x86: OLPC: Cleanup config maze completely
Neither CONFIG_OLPC_OPENFIRMWARE nor CONFIG_OLPC_OPENFIRMWARE_DT are
really necessary.

OLPC selects OLPC_OPENFIRMWARE unconditionally, so move the "select
OF" part under OLPC config option and fixup the dependencies in
Makefiles and code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>
2011-02-23 10:40:45 +01:00
Thomas Gleixner
695884fb8a Merge branch 'devicetree/for-x86' of git://git.secretlab.ca/git/linux-2.6 into x86/platform
Reason: x86 devicetree support for ce4100 depends on those device tree
	changes scheduled for .39.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22 18:41:48 +01:00
Feng Tang
168202c7bf mrst/vrtc: Avoid using cmos rtc ops
If we don't assign Moorestown specific wallclock init and ops function
the rtc/persisent clock code will use cmos rtc for access, this will
crash Moorestown in that the ioports are not present.

Also in vrtc driver, should avoid using cmos access to check UIP status.

[feng.tang@intel.com: use set_fixmap_offset_nocache() to simplify code]
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-14 18:20:43 +01:00
Andres Salomon
419cdc54ea x86: OLPC: convert olpc-xo1 driver from pci device to platform device
The cs5535-mfd driver now takes care of the PCI BAR handling; this
means the olpc-xo1 driver shouldn't be touching the PCI device at all.

This patch uses both cs5535-acpi and cs5535-pms platform devices rather
than a single platform device because the cs5535-mfd driver may be used
by other CS5535 platform-specific drivers; OLPC doesn't get to dictate
that ACPI and PMS will always be used together.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14 12:38:15 +01:00
Linus Torvalds
e691d24e9c Merge branch 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Speed up device tree creation during boot
  x86, olpc: Add OLPC device-tree support
  x86, of: Define irq functions to allow drivers/of/* to build on x86
2011-01-13 10:15:12 -08:00
Linus Torvalds
008d23e485 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13 10:05:56 -08:00
Ingo Molnar
1c2a48cf65 Merge branch 'linus' into x86/apic-cleanups
Conflicts:
	arch/x86/include/asm/io_apic.h

Merge reason: Resolve the conflict, update to a more recent -rc base

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 14:14:15 +01:00
Linus Torvalds
77a0dd54ba Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV, BAU: Extend for more than 16 cpus per socket
  x86, UV: Fix the effect of extra bits in the hub nodeid register
  x86, UV: Add common uv_early_read_mmr() function for reading MMRs
2011-01-06 11:09:57 -08:00
Linus Torvalds
b4c6e2ea5e Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, earlyprintk: Move mrst early console to platform/ and fix a typo
  x86, apbt: Setup affinity for apb timers acting as per-cpu timer
  ce4100: Add errata fixes for UART on CE4100
  x86: platform: Move iris to x86/platform where it belongs
  x86, mrst: Check platform_device_register() return code
  x86/platform: Add Eurobraille/Iris power off support
  x86, mrst: Add explanation for using 1960 as the year offset for vrtc
  x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
  x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
  x86: Ce4100: Add reboot_fixup() for CE4100
  ce4100: Add PCI register emulation for CE4100
  x86: Add CE4100 platform support
  x86: mrst: Set vRTC's IRQ to level trigger type
  x86: mrst: Add audio driver bindings
  rtc: Add drivers/rtc/rtc-mrst.c
  x86: mrst: Add vrtc driver which serves as a wall clock device
  x86: mrst: Add Moorestown specific reboot/shutdown support
  x86: mrst: Parse SFI timer table for all timer configs
  x86/mrst: Add SFI platform device parsing code
2011-01-06 11:06:31 -08:00
Yinghai Lu
cb2ded37fd x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.

It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.

phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.

The variable after phys_cpu_present_map may get corrupted
silently:

 ffffffff828e8420 B phys_cpu_present_map
 ffffffff828e8440 B apic_verbosity
 ffffffff828e8444 B local_apic_timer_c2_ok
 ffffffff828e8448 B disable_apic
 ffffffff828e844c B x2apic_mode
 ffffffff828e8450 B x2apic_disabled
 ffffffff828e8454 B num_processors
 ...

Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.

For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:

	text		data		bss		dec		filename
	21696943	4193748		12787712	38678403	vmlinux.before
	21696943	4193748		12791808	38682499	vmlinux.after

No change on 32bit.

Finally we can remove MAX_APCIS that was rather confusing.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-05 14:09:23 +01:00
Cliff Wickman
cfa60917f0 x86, UV, BAU: Extend for more than 16 cpus per socket
Fix a hard-coded limit of a maximum of 16 cpu's per socket.

The UV Broadcast Assist Unit code initializes by scanning the
cpu topology of the system and assigning a master cpu for each
socket and UV hub. That scan had an assumption of a limit of 16
cpus per socket. With Westmere we are going over that limit.
The UV hub hardware will allow up to 32.

If the scan finds the system has gone over that limit it returns
an error and we print a warning and fall back to doing TLB
shootdowns without the BAU.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # .37.x
LKML-Reference: <E1PZol7-0000mM-77@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03 20:35:03 +01:00
Andres Salomon
b5318d302f x86, olpc: Speed up device tree creation during boot
Calling alloc_bootmem() for tiny chunks of memory over and over is really
slow; on an XO-1, it caused the time between when the kernel started
booting and when the display came alive (post-lxfb probe) to increase
to 44s.  This patch optimizes the prom_early_alloc function by
calling alloc_bootmem for 4k-sized blocks of memory, and handing out
chunks of that to callers.  With this patch, the time between kernel load
and display initialization decreased to 23s.  If there's a better way to
do this early in the boot process, please let me know.

(Note: increasing the chunk size to 16k didn't noticably affect boot time,
and wasted 9k.)

v4: clarify comment, requested by hpa
v3: fix wasted memory buglet found by Milton Miller, and style fix.
v2: reorder prom_early_alloc as suggested by Grant.

Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101129153951.74202a84@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-15 17:11:40 -08:00
Andres Salomon
c10d1e260f x86, olpc: Add OLPC device-tree support
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to
call into OLPC's Open Firmware to build the tree.

v5: fix buglet with root node check (introduced in v4)

v4: address some minor style issues pointed out by Grant, and explicitly cast
    negative phandle checks to s32.

v3: rename olpc_prom to olpc_dt
  - rework Kconfig entries
  - drop devtree build hook from proc, instead adding a call to x86's
    paging_init (similarly to how sparc64 does it)
  - switch allocation from using slab to alloc_bootmem.  this allows
    the DT to be built earlier during boot (during setup_arch); the
    downside is that there are some 1200 bootmem reservations that are
    done during boot.  Not ideal..
  - add a helper olpc_ofw_is_installed function to test for the
    existence and successful detection of OLPC's OFW.

Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101116220952.26526a80@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-15 17:11:30 -08:00
Feng Tang
2d8009ba67 x86: Unify 3 similar ways of saving mp_irqs info
There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.

Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:06 +01:00
Yinghai Lu
53301f36f3 x86, sfi: Use register_lapic_address()
register_lapic_address() and mp_sfi_register_lapic_address() are
almost identical. Use the common function.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF693.6000908@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 21:52:05 +01:00
Thomas Gleixner
51ddafcbc7 Merge branch 'x86/platform' into x86/apic-cleanups
Reason: apic cleanup series depends on x86/apic, x86/amd-nb and x86/platform

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09 18:19:21 +01:00
Feng Tang
991cfffa7c x86, earlyprintk: Move mrst early console to platform/ and fix a typo
Move the code to arch/x86/platform/mrst/. Also fix a typo to use
the correct config option: ONFIG_EARLY_PRINTK_MRST

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: alan@linux.intel.com
LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06 20:52:04 +01:00
Dirk Brandewie
5ec6960f6f ce4100: Add errata fixes for UART on CE4100
This patch enables the UART on the CE4100. The UART has a couple of
issues that need to be worked around. First the UART is mostly PC
compatible except that it is clocked eight times faster than a
standard PC so the default configuration provided in
arch/x86/include/asm/serial.h needs to be overridden. Second the TX
interrupt may not be set correctly all the time. Lastly accessing the
UART via I/O space for early_prink() hangs the chip when the IOAPIC is
enabled.

A custom mem_serial_in() is provided to work around the TX interrupt
issue. The configuration issues are dealt with in the call back
registered with the 8250 driver via serial8250_set_isa_configurator()

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06 15:58:26 +01:00
Thomas Gleixner
9cdca86972 x86: platform: Move iris to x86/platform where it belongs
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-20 10:37:05 +01:00
Vasiliy Kulikov
5ca9afdb9f x86, mrst: Check platform_device_register() return code
platform_device_register() may fail, if so propagate the return
code from mrst_device_create().

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
LKML-Reference: <1290104207-31279-1-git-send-email-segoon@openwall.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-11-18 13:45:46 -08:00
Dimitri Sivanich
8191c9f692 x86: UV: Address interrupt/IO port operation conflict
This patch for SGI UV systems addresses a problem whereby
interrupt transactions being looped back from a local IOH,
through the hub to a local CPU can (erroneously) conflict with
IO port operations and other transactions.

To workaound this we set a high bit in the APIC IDs used for
interrupts. This bit appears to be ignored by the sockets, but
it avoids the conflict in the hub.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20101116222352.GA8155@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
___

 arch/x86/include/asm/uv/uv_hub.h   |    4 ++++
 arch/x86/include/asm/uv/uv_mmrs.h  |   19 ++++++++++++++++++-
 arch/x86/kernel/apic/x2apic_uv_x.c |   25 +++++++++++++++++++++++--
 arch/x86/platform/uv/tlb_uv.c      |    2 +-
 arch/x86/platform/uv/uv_time.c     |    4 +++-
 5 files changed, 49 insertions(+), 5 deletions(-)
2010-11-18 10:41:25 +01:00
Thomas Gleixner
c751e17b53 x86: Add CE4100 platform support
Add CE4100 platform support. CE4100 needs early setup like
moorestown.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-12 00:45:41 +01:00
Feng Tang
6f207e9bb4 x86: mrst: Set vRTC's IRQ to level trigger type
When setting up the mpc_intsrc structure for vRTC's IRQ,
we need to set its irqflag to level trigger, otherwise
it will be taken as edge triggered and the vRTC IRQ will
fire only once, as there is never a EOI issued from the
IA core for it.

The original code worked in previous kernel. This is  because it
was configured to level trigger type by luck. It fell
into the default PCI trigger category which is level triggered.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101111155019.12924.569.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 17:43:18 +01:00
Vinod Koul
86071535f8 x86: mrst: Add audio driver bindings
This patch adds the sound card bindings for Moorestown (pmic_audio) and
the Medfield platform (msic_audio) as IPC devices. This ensures they will be
created at the right time.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110174044.11340.78008.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:28 +01:00
Feng Tang
0146f26145 rtc: Add drivers/rtc/rtc-mrst.c
Provide the standard kernel rtc driver interface on top of the vrtc layer
added in the previous patch.

Signed-off-by: Feng Tang <feng.tang@intel.com>
LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain>
[Fixed swapped arguments on IPC]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
[Cleaned up and the device creation moved to arch/x86/platform]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:27 +01:00
Feng Tang
7309282c90 x86: mrst: Add vrtc driver which serves as a wall clock device
Moorestown platform doesn't have a m146818 RTC device like traditional
x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides
some basic RTC functions like get/set time. vrtc serves as the only
wall clock device on Moorestown platform.

[ tglx: Changed the exports to _GPL ]

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:27 +01:00
Alek Du
cfb505a7eb x86: mrst: Add Moorestown specific reboot/shutdown support
Moorestowns needs to use a special IPC command to reboot or shutdown the
platform.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110164928.6365.94243.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11 11:34:27 +01:00