Commit Graph

39 Commits

Author SHA1 Message Date
Takashi Iwai
60c5772b50 ALSA: pci: Convert to snd_card_new() with a device pointer
Also remove superfluous snd_card_set_dev() calls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12 11:17:52 +01:00
Sarah Bessmer
e240a46965 ALSA: ctxfi - Work around emu20k1 glitch to prevent buffered sound data loss
Occasionally, on playback stream ringbuffer wraparound, the EMU20K1
hardware will momentarily return 0 instead of the proper current(loop)
address. This patch handles that case, fixing the problem of playback
position corruption and subsequent loss of buffered sound data, that
occurs with some common buffering layout patterns(e.g. multiple
simultaneous output streams with differently-sized or
non-power-of-2-sized buffers).

An alternate means of fixing the problem would be to read the ca
register continuously, until two sequential reads return the same
value; however, that would be a more invasive change, has performance
implications, and isn't necessary unless there are also issues with the
value not being updated atomically in regards to individual bits or
something similar(which I have not encountered through light testing).

I have no EMU20K2 hardware to confirm if the issue is present there,
but even if it's not, this change shouldn't break anything that's not
already broken.

Signed-off-by: Sarah Bessmer <aotos@fastmail.fm>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-10 10:10:41 +01:00
Bill Pemberton
e23e7a1436 ALSA: pci: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:20:55 +01:00
Takashi Iwai
ddf83485d7 Merge branch 'for-linus' into for-next
Conflicts:
	sound/pci/hda/hda_codec.c

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20 22:14:26 +02:00
Julia Lawall
4d8ce1c996 ALSA: sound/pci/ctxfi/ctatc.c: fix error return code
Initialize err before returning on failure, as done elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20 10:57:30 +02:00
Takashi Iwai
c7561cd804 ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEP
Otherwise we may get compile warnings due to unused functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14 18:12:04 +02:00
Takashi Iwai
68cb2b5592 ALSA: Convert to new pm_ops for PCI drivers
Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:03 +02:00
Harry Butterworth
b028b81835 ALSA: ctxfi: Implement a combined capabilities query method to replace multiple have_x query methods.
Signed-off-by: Harry Butterworth <heb1001@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-14 07:34:03 +02:00
Harry Butterworth
55309216ba ALSA: ctxfi: Add support for Creative Titanium HD
Initialise model-specific DAC and ADC parts.
Add controls for output and mic source selection.
Rename some mixer controls according to ControlNames.txt.
Remove Playback switches for Line-in and IEC958-in - these
were controlling the input mute/unmute which affected
capture too.  Use the capture switches to control the
input mute/unmute instead - it's less confusing.
Initialise the WM8775 to invert the left-right clock
to swap the left and right channels of the mic and aux
input.

Signed-off-by: Harry Butterworth <heb1001@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-14 07:32:29 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Przemyslaw Bruski
4c1847e884 ALSA: ctxfi - Fix incorrect SPDIF status bit mask
SPDIF status mask creation was incorrect.

Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-14 11:19:30 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jaroslav Kysela
b8f1f5983f Merge branch 'topic/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel 2010-02-16 11:25:03 +01:00
Jaroslav Kysela
21956b61f5 ALSA: ctxfi - fix PTP address initialization
After hours of debugging, I finally found the reason why some source
and runtime combination does not work. The PTP (page table pages)
address must be aligned. I am not sure how much, but alignment to
PAGE_SIZE is sufficient. Also, use ALSA's page allocation routines
to ensure proper virtual -> physical address translation.

Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-04 21:48:00 +01:00
Takashi Iwai
408bffd01c ALSA: ctxfi - Add subsystem option
Added a new option "subsystem" to override the PCI SSID for identifying
the card type.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-14 09:23:10 +01:00
Takashi Iwai
e87a3dd33e Merge branch 'fix/misc' into topic/misc 2009-11-01 11:11:07 +01:00
Roel Kluin
84ed1a1942 ALSA: Cleanup redundant tests on unsigned
The variables are unsigned so the test `>= 0' is always true,
the `< 0' test always fails. In these cases the other part of
the test catches wrapped values.

In dac_audio_write() there does not occur a test for wrapped
values, but the test appears redundant.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-30 12:25:07 +01:00
Sven Eckelmann
3b04691c2b ALSA: ctxfi: Swapped SURROUND-SIDE mute
On Soundblaster X-FI Titenium with emu20k2 the SIDE and SURROUND mute
functions are swapped.
It was checked with 'speaker-test -c 8 -s 3' and (un)mute surround or
'speaker-test -c 8 -s 7' and (un)mute side. The volume seems not
to be affected and works as expected.

Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-02 07:45:55 +02:00
Takashi Iwai
35ebf6e721 ALSA: ctxfi - Simple code clean up
- replace NULL == xxx with !xxx
- replace NULL != xxx with xxx
- similar trivial cleanups

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-22 17:12:34 +02:00
Wai Yew CHAY
29959a09cc ALSA: ctxfi - Add PM support
Added the suspend/resume support to ctxfi driver.

The team tested on the following seems ok:
  AMD Athlon 64 3500+ / ASUS A8N-E / 512MB DDR ATI / Radeon X1300
  20k1 & 20k2 cards

Signed-off-by: Wai Yew CHAY <wychay@ctl.creative.com>
Singed-off-by: Ryan RICHARDS <ryan_richards@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22 14:53:51 +02:00
Takashi Iwai
a8f4310be5 ALSA: ctxfi - Allow unknown PCI SSIDs
Allow unknown PCI SSIDs for emu20k1 and emu20k2 as "unknown" model.
Also, add a black-list check in case any device has to be listed
as "unsupported".  It has a negative value in the pci quirk entry.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-22 07:36:52 +02:00
Takashi Iwai
635c265f32 ALSA: ctxfi - Replace atc lock to mutex
The spinlock in atc can cause a sleep in lock:

Kernel failure message 1:
BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 0, irqs_disabled(): 1, pid: 2537, name: gstreamer-prope
Pid: 2537, comm: gstreamer-prope Tainted: P
2.6.29.4-167.fc11.x86_64 #1
Call Trace:
  [<ffffffff8103ff0f>] __might_sleep+0x10b/0x110
  [<ffffffff810cd734>] __kmalloc+0x73/0x130
  [<ffffffffa0b4b142>] ? daio_rsc_init+0xaa/0x125 [snd_ctxfi]
  [<ffffffffa0b4b212>] dao_rsc_init+0x55/0x1c0 [snd_ctxfi]
  [<ffffffffa0b4b3d2>] dao_rsc_reinit+0x55/0x5d [snd_ctxfi]
  [<ffffffff813abd6c>] ? _spin_lock_irqsave+0x32/0x3b
  [<ffffffffa0b454fe>] atc_spdif_out_passthru+0x92/0x136 [snd_ctxfi]
  ...

Since the lock path is no critical path, it can be gracefully
replaced with a mutex.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-13 10:12:59 +02:00
Takashi Iwai
a5990dc5b9 ALSA: ctxfi - Clear PCM resources at hw_params and hw_free
Currently the PCM resources are allocated only once and ever in prepare
callback, assuming that the PCM parameters are never changed.  But it's
not true.

This patch adds the call of atc->pcm_release_resources() at hw_params
and hw_free callbacks to assure that the PCM setup is done correctly
for each h/w parameter changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-09 08:19:02 +02:00
Takashi Iwai
5242bc7613 ALSA: ctxfi - Check the presence of SRC instance in PCM pointer callbacks
The SRC instances may not exist when PCM pointer callback is called at
the state before initialization is finished.  Add the NULL check just
to be sure.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-09 08:17:14 +02:00
Takashi Iwai
c399f3be82 ALSA: ctxfi - Add missing start check in atc_pcm_playback_start()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-09 08:16:20 +02:00
Takashi Iwai
09521d2e3e ALSA: ctxfi - Fix wrong model id for UAA
CTUAA should be checked instead of CTHENDRIX.  The latter is for 20k2 chip.
Also, fixed the detection of UAA/HENDRIX models by fixing the mask bits.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08 18:30:37 +02:00
Takashi Iwai
9470195a9c ALSA: ctxfi - Clean up probe routines
Clean up probe routines and model detection routines so that the driver
won't call and check the PCI subsystem id at each time.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08 18:10:32 +02:00
Takashi Iwai
514eef9c2a ALSA: ctxfi - Remove useless initializations and cast
Remove useless variable initializations and cast at the beginning of
functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-08 14:57:57 +02:00
Takashi Iwai
2a36f67f8c ALSA: ctxfi - Clean up / optimize
- Use static tables instead of assigining each funciton pointer
- Add __devinit* to appropriate places; pcm, mixer and timer cannot be
  marked because they are kept in the function table that lives long
- Move create_alsa_devs function out of struct ct_atc to mark it
  __devinit

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05 16:44:24 +02:00
Takashi Iwai
b7bbf87608 ALSA: ctxfi - Use native timer interrupt on emu20k1
emu20k1 has a native timer interrupt based on the audio clock, which
is more accurate than the system timer (from the synchronization POV).
This patch adds the code to handle this with multiple streams.

The system timer is still used on emu20k2, and can be used also for
emu20k1 easily by changing USE_SYSTEM_TIMER to 1 in cttimer.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-05 16:44:13 +02:00
Takashi Iwai
c76157d928 ALSA: ctxfi - Support SG-buffers
Use SG-buffers instead of contiguous pages.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02 15:54:47 +02:00
Takashi Iwai
d2b9b96c51 ALSA: ctxfi - Fix supported PCM formats
The device seems supporting only U8, S16, S24_3LE, S32.  Other linear
formats result in bad outputs.

Also, added the support for 32bit float format, which wasn't listed
in the original code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02 15:54:46 +02:00
Takashi Iwai
8372d4980f ALSA: ctxfi - Fix PCM device naming
PCM names for surround streams should be also fixed as well as the mixer
element names.  Also, a bit clean up for PCM name setup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02 15:54:46 +02:00
Takashi Iwai
822fa19b5c ALSA: ALSA: ctxfi - Release PCM resources at each prepare call
The prepare callback can be called multiple times, thus it needs to
release and acquire the resource again by itself at the second or later
call.

Simply add pcm_release_resources() at the beginning of each prepare
callback in ctatc.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02 15:54:46 +02:00
Takashi Iwai
8a4259bf89 ALSA: ctxfi - Fix Oops at mmapping
Replace a spinlock with a mutex protecting the vm block list at
mmap / munmap calls, which caused Oops like below:

BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 0, irqs_disabled(): 1, pid: 32065, name: xine
Pid: 32065, comm: xine Tainted: P           2.6.29.4-75.fc10.x86_64 #1
Call Trace:
  [<ffffffff81040685>] __might_sleep+0x105/0x10a
  [<ffffffff810c9fae>] kmem_cache_alloc+0x32/0xe2
  [<ffffffffa08e3110>] ct_vm_map+0xfa/0x19e [snd_ctxfi]
  [<ffffffffa08e1a07>] ct_map_audio_buffer+0x4c/0x76 [snd_ctxfi]
  [<ffffffffa08e2aa5>] atc_pcm_playback_prepare+0x1d7/0x2a8 [snd_ctxfi]
  [<ffffffff8105ef3f>] ? up_read+0x9/0xb
  [<ffffffff81186b61>] ? __up_read+0x7c/0x87
  [<ffffffffa08e36a6>] ct_pcm_playback_prepare+0x39/0x60 [snd_ctxfi]
  [<ffffffffa0886bcb>] snd_pcm_do_prepare+0x16/0x28 [snd_pcm]
  [<ffffffffa08867c7>] snd_pcm_action_single+0x2d/0x5b [snd_pcm]
  [<ffffffffa08881f3>] snd_pcm_action_nonatomic+0x52/0x6a [snd_pcm]
  [<ffffffffa088a723>] snd_pcm_common_ioctl1+0x404/0xc79 [snd_pcm]
  [<ffffffff810c52c8>] ? alloc_pages_current+0xb9/0xc2
  [<ffffffff810c9402>] ? new_slab+0x1a5/0x1cb
  [<ffffffff810ab9ea>] ? vma_prio_tree_insert+0x23/0xc1
  [<ffffffffa088b411>] snd_pcm_playback_ioctl1+0x213/0x230 [snd_pcm]
  [<ffffffff810b6c20>] ? mmap_region+0x397/0x4c9
  [<ffffffffa088bd9b>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm]
  [<ffffffff810ddc64>] vfs_ioctl+0x2a/0x78
  [<ffffffff810de130>] do_vfs_ioctl+0x462/0x4a2
  [<ffffffff81029cef>] ? default_spin_lock_flags+0x9/0xe
  [<ffffffff81374647>] ? trace_hardirqs_off_thunk+0x3a/0x6c
  [<ffffffff810de1c5>] sys_ioctl+0x55/0x77
  [<ffffffff8101133a>] system_call_fastpath+0x16/0x1b

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-02 08:40:51 +02:00
Takashi Iwai
b3e0afe61e ALSA: ctxfi - Add prefix to debug prints
Added ctxfi: prefix to each debug print.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 15:19:30 +02:00
Takashi Iwai
35b053becb ALSA: ctxfi - Avoid unneeded pci_read_config_*() calls
Use struct pci subsystem_device and revision fields instead of
unneeded calls of pci_read_config_*().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 15:17:16 +02:00
Takashi Iwai
9fc20f030b ALSA: ctxfi - Move PCI ID definitions to linux/pci_ids.h
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 15:14:18 +02:00
Wai Yew CHAY
8cc7236148 ALSA: SB X-Fi driver merge
The Sound Blaster X-Fi driver supports Creative solutions based on
20K1 and 20K2 chipsets.

Supported hardware :

Creative Sound Blaster X-Fi Titanium Fatal1ty® Champion Series
Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
Creative Sound Blaster X-Fi Titanium Professional Audio
Creative Sound Blaster X-Fi Titanium
Creative Sound Blaster X-Fi Elite Pro
Creative Sound Blaster X-Fi Platinum
Creative Sound Blaster X-Fi Fatal1ty
Creative Sound Blaster X-Fi XtremeGamer
Creative Sound Blaster X-Fi XtremeMusic

Current release features:

* ALSA PCM Playback
* ALSA Record
* ALSA Mixer

Note:

* External I/O modules detection not included.

Signed-off-by: Wai Yew CHAY <wychay@ctl.creative.com>
Singed-off-by: Ryan RICHARDS <ryan_richards@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-14 08:24:10 +02:00