Errors like below were produced from test_util.c when compiling the KVM
selftests on my local platform.
lib/test_util.c: In function 'vm_mem_backing_src_alias':
lib/test_util.c:177:12: error: initializer element is not constant
.flag = anon_flags,
^~~~~~~~~~
lib/test_util.c:177:12: note: (near initialization for 'aliases[0].flag')
The reason is that we are using non-const expressions to initialize the
static structure, which will probably trigger a compiling error/warning
on stricter GCC versions. Fix it by converting the two const variables
"anon_flags" and "anon_huge_flags" into more stable macros.
Fixes: b3784bc28c ("KVM: selftests: refactor vm_mem_backing_src_type flags")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20210610085418.35544-1-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Until commit 39fe2fc966 ("selftests: kvm: make allocation of extra
memory take effect", 2021-05-27), parameter extra_mem_pages was used
only to calculate the page table size for all the memory chunks,
because real memory allocation happened with calls of
vm_userspace_mem_region_add() after vm_create_default().
Commit 39fe2fc966 however changed the meaning of extra_mem_pages to
the size of memory slot 0. This makes the memory allocation more
flexible, but makes it harder to account for the number of
pages needed for the page tables. For example, memslot_perf_test
has a small amount of memory in slot 0 but a lot in other slots,
and adding that memory twice (both in slot 0 and with later
calls to vm_userspace_mem_region_add()) causes an error that
was fixed in commit 000ac42953 ("selftests: kvm: fix overlapping
addresses in memslot_perf_test", 2021-05-29)
Since both uses are sensible, add a new parameter slot0_mem_pages
to vm_create_with_vcpus() and some comments to clarify the meaning of
slot0_mem_pages and extra_mem_pages. With this change,
memslot_perf_test can go back to passing the number of memory
pages as extra_mem_pages.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210608233816.423958-4-zhenzhong.duan@intel.com>
[Squashed in a single patch and rewrote the commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UFFD handling of MINOR faults is a new feature whose use case is to
speed up demand paging (compared to MISSING faults). So, it's
interesting to let this selftest exercise this new mode.
Modify the demand paging test to have the option of using UFFD minor
faults, as opposed to missing faults. Now, when turning on userfaultfd
with '-u', the desired mode has to be specified ("MISSING" or "MINOR").
If we're in minor mode, before registering, prefault via the *alias*.
This way, the guest will trigger minor faults, instead of missing
faults, and we can UFFDIO_CONTINUE to resolve them.
Modify the page fault handler function to use the right ioctl depending
on the mode we're running in. In MINOR mode, use UFFDIO_CONTINUE.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-10-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a memory region is added with a src_type specifying that it should
use some kind of shared memory, also create an alias mapping to the same
underlying physical pages.
And, add an API so tests can get access to these alias addresses.
Basically, for a guest physical address, let us look up the analogous
host *alias* address.
In a future commit, we'll modify the demand paging test to take
advantage of this to exercise UFFD minor faults. The idea is, we
pre-fault the underlying pages *via the alias*. When the *guest*
faults, it gets a "minor" fault (PTEs don't exist yet, but a page is
already in the page cache). Then, the userfaultfd theads can handle the
fault: they could potentially modify the underlying memory *via the
alias* if they wanted to, and then they install the PTEs and let the
guest carry on via a UFFDIO_CONTINUE ioctl.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-9-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets us run the demand paging test on top of a shmem-backed area.
In follow-up commits, we'll 1) leverage this new capability to create an
alias mapping, and then 2) use the alias mapping to exercise UFFD minor
faults.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-8-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Each struct vm_mem_backing_src_alias has a flags field, which denotes
the flags used to mmap() an area of that type. Previously, this field
never included MAP_PRIVATE | MAP_ANONYMOUS, because
vm_userspace_mem_region_add assumed that *all* types would always use
those flags, and so it hardcoded them.
In a follow-up commit, we'll add a new type: shmem. Areas of this type
must not have MAP_PRIVATE | MAP_ANONYMOUS, and instead they must have
MAP_SHARED.
So, refactor things. Make it so that the flags field of
struct vm_mem_backing_src_alias really is a complete set of flags, and
don't add in any extras in vm_userspace_mem_region_add. This will let us
easily tack on shmem.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-7-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument which lets us specify a different backing memory type
for the test. The default is just to use anonymous, matching existing
behavior.
This is in preparation for testing UFFD minor faults. For that, we'll
need to use a new backing memory type which is setup with MAP_SHARED.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-6-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a preparatory commit needed before we can use different kinds of
backing pages for guest memory.
Previously, we used perf_test_args.host_page_size, which is the host's
native page size (commonly 4K). For VM_MEM_SRC_ANONYMOUS this turns out
to be okay, but in a follow-up commit we want to allow using different
kinds of backing memory.
Take VM_MEM_SRC_ANONYMOUS_HUGETLB for example. Without this change, if
we used that backing page type, when we issued a UFFDIO_COPY ioctl we'd
only do so with 4K, rather than the full 2M of a backing hugepage. In
this case, UFFDIO_COPY returns -EINVAL (__mcopy_atomic_hugetlb checks
the size).
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-5-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A small cleanup. Our caller writes:
r = setup_demand_paging(...);
if (r < 0) exit(-r);
Since we're just going to exit anyway, instead of returning an error we
can just re-use TEST_ASSERT. This makes the caller simpler, as well as
the function itself - no need to write our branches, etc.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-3-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a KVM selftest is run on a machine without /dev/kvm, it will exit
silently. Make it easy to tell what's happening by printing an error
message.
Opportunistically consolidate all codepaths that open /dev/kvm into a
single function so they all print the same message.
This slightly changes the semantics of vm_is_unrestricted_guest() by
changing a TEST_ASSERT() to exit(KSFT_SKIP). However
vm_is_unrestricted_guest() is only called in one place
(x86_64/mmio_warning_test.c) and that is to determine if the test should
be skipped or not.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210511202120.1371800-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some trivial fixes I found while touching related code in this series,
factored out into a separate commit for easier reviewing:
- s/gor/got/ and add a newline in demand_paging_test.c
- s/backing_src/src_type/ in a comment to be consistent with the real
function signature in kvm_util.c
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-2-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If /dev/kvm is not available then hardware_disable_test will hang
indefinitely because the child process exits before posting to the
semaphore for which the parent is waiting.
Fix this by making the parent periodically check if the child has
exited. We have to be careful to forward the child's exit status to
preserve a KSFT_SKIP status.
I considered just checking for /dev/kvm before creating the child
process, but there are so many other reasons why the child could exit
early that it seemed better to handle that as general case.
Tested:
$ ./hardware_disable_test
/dev/kvm not available, skipping test
$ echo $?
4
$ modprobe kvm_intel
$ ./hardware_disable_test
$ echo $?
0
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210514230521.2608768-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to CPUID.0DH.0H this entry depends on the vCPU's XCR0 register
and IA32_XSS MSR. Since this test does not control for either before
assigning the vCPU's CPUID, these entries will not necessarily match
the supported CPUID exposed by KVM.
This fixes get_cpuid_test on Cascade Lake CPUs.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210519211345.3944063-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_get_max_gfn() casts vm->max_gfn from a uint64_t to an unsigned int,
which causes the upper 32-bits of the max_gfn to get truncated.
Nobody noticed until now likely because vm_get_max_gfn() is only used
as a mechanism to create a memslot in an unused region of the guest
physical address space (the top), and the top of the 32-bit physical
address space was always good enough.
This fix reveals a bug in memslot_modification_stress_test which was
trying to create a dummy memslot past the end of guest physical memory.
Fix that by moving the dummy memslot lower.
Fixes: 52200d0d94 ("KVM: selftests: Remove duplicate guest mode handling")
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210521173828.1180619-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This benchmark contains the following tests:
* Map test, where the host unmaps guest memory while the guest writes to
it (maps it).
The test is designed in a way to make the unmap operation on the host
take a negligible amount of time in comparison with the mapping
operation in the guest.
The test area is actually split in two: the first half is being mapped
by the guest while the second half in being unmapped by the host.
Then a guest <-> host sync happens and the areas are reversed.
* Unmap test which is broadly similar to the above map test, but it is
designed in an opposite way: to make the mapping operation in the guest
take a negligible amount of time in comparison with the unmap operation
on the host.
This test is available in two variants: with per-page unmap operation
or a chunked one (using 2 MiB chunk size).
* Move active area test which involves moving the last (highest gfn)
memslot a bit back and forth on the host while the guest is
concurrently writing around the area being moved (including over the
moved memslot).
* Move inactive area test which is similar to the previous move active
area test, but now guest writes all happen outside of the area being
moved.
* Read / write test in which the guest writes to the beginning of each
page of the test area while the host writes to the middle of each such
page.
Then each side checks the values the other side has written.
This particular test is not expected to give different results depending
on particular memslots implementation, it is meant as a rough sanity
check and to provide insight on the spread of test results expected.
Each test performs its operation in a loop until a test period ends
(this is 5 seconds by default, but it is configurable).
Then the total count of loops done is divided by the actual elapsed
time to give the test result.
The tests have a configurable memslot cap with the "-s" test option, by
default the system maximum is used.
Each test is repeated a particular number of times (by default 20
times), the best result achieved is printed.
The test memory area is divided equally between memslots, the reminder
is added to the last memslot.
The test area size does not depend on the number of memslots in use.
The tests also measure the time that it took to add all these memslots.
The best result from the tests that use the whole test area is printed
after all the requested tests are done.
In general, these tests are designed to use as much memory as possible
(within reason) while still doing 100+ loops even on high memslot counts
with the default test length.
Increasing the test runtime makes it increasingly more likely that some
event will happen on the system during the test run, which might lower
the test result.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <8d31bb3d92bc8fa33a9756fa802ee14266ab994e.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM selftest framework was using a simple list for keeping track of
the memslots currently in use.
This resulted in lookups and adding a single memslot being O(n), the
later due to linear scanning of the existing memslot set to check for
the presence of any conflicting entries.
Before this change, benchmarking high count of memslots was more or less
impossible as pretty much all the benchmark time was spent in the
selftest framework code.
We can simply use a rbtree for keeping track of both of gfn and hva.
We don't need an interval tree for hva here as we can't have overlapping
memslots because we allocate a completely new memory chunk for each new
memslot.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <b12749d47ee860468240cf027412c91b76dbe3db.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs
may not be continuous if same memslot is used for data and page table allocation.
kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs)
because it does not try to read file data page by page. Fix this mismatch
by allocating memory in one step.
Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The extra memory pages is missed to be allocated during VM creating.
perf_test_util and kvm_page_table_test use it to alloc extra memory
currently.
Fix it by adding extra_mem_pages to the total memory calculation before
allocate.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210512043107.30076-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 5.13, take #1
- Fix regression with irqbypass not restarting the guest on failed connect
- Fix regression with debug register decoding resulting in overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
Add a test for the regression, introduced by commit f2c7ef3ba9
("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit"). When
L2->L1 exit is forced immediately after restoring nested state,
KVM_REQ_GET_NESTED_STATE_PAGES request is cleared and VMCS12 changes
(e.g. fresh RIP) are not reflected to eVMCS. The consequent nested
vCPU run gets broken.
Utilize NMI injection to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210505151823.1341678-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
Pull ktest updates from Steven Rostedt:
- Added a KTEST section in the MAINTAINERS file
- Included John Hawley as a co-maintainer
- Add an example config that would work with VMware workstation guests
- Cleanups to the code
* tag 'ktest-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add KTEST section to MAINTAINERS file
ktest: Re-arrange the code blocks for better discoverability
ktest: Further consistency cleanups
ktest: Fixing indentation to match expected pattern
ktest: Adding editor hints to improve consistency
ktest: Add example config for using VMware VMs
ktest: Minor cleanup with uninitialized variable $build_options
In gup_test both gup_flags and test_flags use the same flags field.
This is broken.
Farther, in the actual gup_test.c all the passed gup_flags are erased
and unconditionally replaced with FOLL_WRITE.
Which means that test_flags are ignored, and code like this always
performs pin dump test:
155 if (gup->flags & GUP_TEST_FLAG_DUMP_PAGES_USE_PIN)
156 nr = pin_user_pages(addr, nr, gup->flags,
157 pages + i, NULL);
158 else
159 nr = get_user_pages(addr, nr, gup->flags,
160 pages + i, NULL);
161 break;
Add a new test_flags field, to allow raw gup_flags to work. Add a new
subcommand for DUMP_USER_PAGES_TEST to specify that pin test should be
performed.
Remove unconditional overwriting of gup_flags via FOLL_WRITE. But,
preserve the previous behaviour where FOLL_WRITE was the default flag,
and add a new option "-W" to unset FOLL_WRITE.
Rename flags with gup_flags.
With the fix, dump works like this:
root@virtme:/# gup_test -c
---- page #0, starting from user virt addr: 0x7f8acb9e4000
page:00000000d3d2ee27 refcount:2 mapcount:1 mapping:0000000000000000
index:0x0 pfn:0x100bcf
anon flags: 0x300000000080016(referenced|uptodate|lru|swapbacked)
raw: 0300000000080016 ffffd0e204021608 ffffd0e208df2e88 ffff8ea04243ec61
raw: 0000000000000000 0000000000000000 0000000200000000 0000000000000000
page dumped because: gup_test: dump_pages() test
DUMP_USER_PAGES_TEST: done
root@virtme:/# gup_test -c -p
---- page #0, starting from user virt addr: 0x7fd19701b000
page:00000000baed3c7d refcount:1025 mapcount:1 mapping:0000000000000000
index:0x0 pfn:0x108008
anon flags: 0x300000000080014(uptodate|lru|swapbacked)
raw: 0300000000080014 ffffd0e204200188 ffffd0e205e09088 ffff8ea04243ee71
raw: 0000000000000000 0000000000000000 0000040100000000 0000000000000000
page dumped because: gup_test: dump_pages() test
DUMP_USER_PAGES_TEST: done
Refcount shows the difference between pin vs no-pin case.
Also change type of nr from int to long, as it counts number of pages.
Link: https://lkml.kernel.org/r/20210215161349.246722-14-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We did not have a direct user interface of splitting the compound page
backing a THP and there is no need unless we want to expose the THP
implementation details to users. Make <debugfs>/split_huge_pages accept a
new command to do that.
By writing "<pid>,<vaddr_start>,<vaddr_end>" to
<debugfs>/split_huge_pages, THPs within the given virtual address range
from the process with the given pid are split. It is used to test
split_huge_page function. In addition, a selftest program is added to
tools/testing/selftests/vm to utilize the interface by splitting
PMD THPs and PTE-mapped THPs.
This does not change the old behavior, i.e., writing 1 to the interface
to split all THPs in the system.
Link: https://lkml.kernel.org/r/20210331235309.332292-1-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mika Penttila <mika.penttila@nextfour.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull dma-mapping updates from Christoph Hellwig:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright notice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add unlikely hint to error path in dma_mapping_error
dma-mapping: benchmark: Add support for multi-pages map/unmap
dma-mapping: benchmark: use the correct HiSilicon copyright
dma-mapping: remove a pointless empty line in dma_alloc_coherent
media: uvcvideo: Use dma_alloc_noncontiguous API
dma-iommu: implement ->alloc_noncontiguous
dma-iommu: refactor iommu_dma_alloc_remap
dma-mapping: add a dma_alloc_noncontiguous API
dma-mapping: refactor dma_{alloc,free}_pages
dma-mapping: add a dma_mmap_pages helper
Perl, as with most scripting languages, is fairly flexible in how /
where you can define things, and it will (for the most part) do what you
would expect it to do. This however can lead to situations, like with
ktest, where things get muddled over time.
This pushes the variable definitions back up to the top, followed by
functions, with the main script executables down at the bottom, INSTEAD
of being somewhat mish-mashed together in certain places. This mostly
has the advantage of making it more obvious where things are initially
defined, what functions are there, and ACTUALLY where the main script
starts executing, and should make this a little more approachable.
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This cleans up some additional whitespace pieces that to be more
consistent, as well as moving a curly brace around, and some 'or'
statements to match the rest of the file (usually or goes at the
end of the line vs. at the beginning)
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This is a followup to "ktest: Adding editor hints to improve
consistency" to actually adjust the existing indentation to match
the, now, expected pattern (first column 4 spaces, 2nd tab, 3rd
tab + 4 spaces, etc). This should, at least help, keep things
consistent going forward now.
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Emacs and Vi(m) have different styles of dealing with perl syntax
which can lead to slightly inconsistent indentation, and makes the
code slightly harder to read. Emacs assumes a more perl recommended
standard of 4 spaces (1 column) or tab (two column) indentation.
Vi(m) tends to favor just normal spaces or tabs depending on what
was being used.
This gives the basic hinting to Emacs and Vim to do what is
expected to be basically consistent.
Emacs:
- Explicitly flip into perl mode, cperl would require
more adjustments
Vi(m):
- Set softtabs=4 which will flip it over to doing
indentation the way you would expect from Emacs
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This duplicates the KVM/Qemu config with specific notes for how
to use it with VMware VMs on Workstation, Player, or Fusion.
The main thing to be aware of is how the serial port is exposed
which is a unix pipe, and will need something like ncat to get
into ktest's monitoring
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
