Commit Graph

227 Commits

Author SHA1 Message Date
Kazuya Mizuguchi
b4bc88a868 ravb: Add fixed-link support
This patch adds support of the fixed PHY.
This patch is based on commit 87009814cd ("ucc_geth: use the new fixed
PHY helpers").

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 12:45:21 -05:00
Kazuya Mizuguchi
6474de5f10 ravb: clear RIC1 in init instead of stop
AVB-DMAC Receive FIFO Warning interrupt is not enabled, so it is not
necessary to disable the interrupt in ravb_close().
On the other hand, this patch disables the interrupt in ravb_dmac_init() to
prevent the possibility that the interrupt is issued by the state that
a boot loader left.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14 14:33:09 -05:00
Sergei Shtylyov
78fa3c5c52 sh_eth: get rid of bb_{set|clr|read}()
After the MDIO bitbang code consolidation, there's no need anymore for
bb_{set|clr}() as well as bb_read() -- just expand them inline, thus
saving more LoCs...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08 21:55:05 -05:00
Sergei Shtylyov
39b4b06b8b sh_eth: factor out common code from MDIO bitbang methods
sh_mm[cd]_ctrl()  and sh_set_mdio() all look mostly the same -- factor out
their common code and put it into sh_mdio_ctrl().

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08 21:55:05 -05:00
Sergei Shtylyov
3242e2b46d sh_eth: remove mask fields from 'struct bb_info'
The MDIO control bits are always mapped to the same bits of the same register
(PIR), so there's no need to store their masks in the 'struct bb_info'...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08 21:55:05 -05:00
Sergei Shtylyov
37742f028b sh_eth: read MAC address registers only once
The code reading the MAHR/MALR registers in read_mac_address() is terribly
ineffective -- it reads MAHR 4 times and MALR 2 times, while it's enough to
read each register only once.  Use the local variables to achieve that,
somewhat beautifying the code while at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 22:45:56 -05:00
Sergei Shtylyov
d966063897 ravb: read MAC address registers only once
The code reading the MAHR/MALR registers in ravb_read_mac_address() is
terribly ineffective -- it reads  MAHR 4 times and MALR 2 times, while
it's enough to read each register only once. Use the local variables to
achieve that, somewhat beautifying the code while at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 22:45:55 -05:00
David S. Miller
f188b951f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/renesas/ravb_main.c
	kernel/bpf/syscall.c
	net/ipv4/ipmr.c

All three conflicts were cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 21:09:12 -05:00
Simon Horman
0e8743611a ravb: add fallback compatibility strings
Add fallback compatibility strings for R-Car Gen 2 & 3 SoC Families.
This is in keeping with the fallback scheme being adopted wherever appropriate
for drivers for Renesas SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 15:01:08 -05:00
Kazuya Mizuguchi
f5d7837f96 ravb: ptp: Add CONFIG mode support
This patch makes PTP support active in CONFIG mode on R-Car Gen3.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 14:28:26 -05:00
Geert Uytterhoeven
1af2729c5e sh_eth: Remove obsolete r8a777x-ether platform_device_id entry
Since commit 3d7608e4c1 ("ARM: shmobile: bockw: remove legacy
board file and config"), R-Car Gen1 SoCs are only supported in generic
DT-only ARM multi-platform builds.  The driver doesn't need to match
platform devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect sh_eth_set_rate_r8a777x() and r8a777x_data by #ifdef CONFIG_OF,
as they're now referenced on DT platforms only.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 16:48:17 -05:00
Geert Uytterhoeven
a0f48be33c sh_eth: Remove obsolete r8a7740-gether platform_device_id entry
Since commit 1fa59bda21 ("ARM: shmobile: Remove legacy board code
for Armadillo-800 EVA"), r8a7740 is only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect r8a7740_data by #ifdef CONFIG_OF as it's now referenced on DT
platforms only. Move it to a more logical position, in front of the
r8a777x support, so we can have a single #ifdef covering all r7s* and
r8a* support soon. This requires moving a few helper functions, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 16:48:17 -05:00
Geert Uytterhoeven
c74a2248f9 sh_eth: Remove obsolete r8a779x-ether platform_device_id entries
Since commit a483dcbfa2 ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect r8a779x_data by #ifdef CONFIG_OF as it's now referenced on DT
platforms only.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 16:48:16 -05:00
Geert Uytterhoeven
99f84be60a sh_eth: Remove obsolete r7s72100-ether platform_device_id entry
Since commit 05104c266a ("ARM: shmobile: r7s72100: genmai: Remove
legacy board file"), r7s72100 is only supported in generic DT-only ARM
multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect r7s72100_data by #ifdef CONFIG_OF as it's now referenced on DT
platforms only. Move it to a more logical position, in front of the
r8a777x support, so we can have a single #ifdef covering all r7s* and
r8a* support soon. This requires moving a helper function, too.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 16:48:16 -05:00
Simon Horman
b3d39a8805 ravb: use clock rate as basis for GTI.TIV
The GTI.TIV may be set to 2GHz^2 / rate, where rate is
that of the clock of the device. Rather than assuming a
rate of 130MHz use the actual rate of the clock.

The motivation for this is to use the correct rate on
the r8a7795/Salvator-X which is advertised as 133MHz but
may differ depending on the extal present on the Salvator-X.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 14:52:37 -05:00
Sergei Shtylyov
508dc0648c ravb: fix WARNING in __free_irq()
When the R8A7795 support was  added to the driver, little attention was paid
to the ravb_open() error path: free_irq()  for the EMAC interrupt was called
uncoditionally, unlike request_irq(), and in  a wrong order as well...
As a result, on the R-Car gen2 SoCs I started getting the following in case
of a device  opening error:

WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1448 __free_irq+0x8c/0x228()
Trying to free already-free IRQ 0
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc1-dirty #1005
Hardware name: Generic R8A7791 (Flattened Device Tree)
Backtrace:
[<c0013818>] (dump_backtrace) from [<c00139b4>] (show_stack+0x18/0x1c)
 r6:c063cdd6 r5:00000009 r4:00000000 r3:00204140
[<c001399c>] (show_stack) from [<c022a578>] (dump_stack+0x74/0x90)
[<c022a504>] (dump_stack) from [<c0025f04>] (warn_slowpath_common+0x8c/0xb8)
 r4:ef04fd38 r3:c0714770
[<c0025e78>] (warn_slowpath_common) from [<c0025fd4>] (warn_slowpath_fmt+0x38/0x40)
 r8:ee8ad800 r7:ef0030a0 r6:00000000 r5:00000000 r4:ef003040
[<c0025fa0>] (warn_slowpath_fmt) from [<c0064cc0>] (__free_irq+0x8c/0x228)
 r3:00000000 r2:c063ce9f
[<c0064c34>] (__free_irq) from [<c0064ecc>] (free_irq+0x70/0xa4)
 r10:0000016b r8:00000000 r7:00000000 r6:ee8ad800 r5:00000000 r4:ef003040
[<c0064e5c>] (free_irq) from [<c033472c>] (ravb_open+0x224/0x274)
 r7:fffffffe r6:00000000 r5:fffffffe r4:ee8ad800
[<c0334508>] (ravb_open) from [<c041ac78>] (__dev_open+0x84/0x104)
 r7:ee8ad830 r6:c0566334 r5:00000000 r4:ee8ad800
[<c041abf4>] (__dev_open) from [<c041af08>] (__dev_change_flags+0x94/0x13c)
 r7:00001002 r6:00000001 r5:00001003 r4:ee8ad800
[<c041ae74>] (__dev_change_flags) from [<c041afe8>] (dev_change_flags+0x20/0x50)
 r7:c072e6e0 r6:00000138 r5:00001002 r4:ee8ad800
[<c041afc8>] (dev_change_flags) from [<c06ec06c>] (ip_auto_config+0x174/0xfb8)
 r8:00001002 r7:c072e6e0 r6:c0703344 r5:00000001 r4:ee8ad800 r3:00000101
[<c06ebef8>] (ip_auto_config) from [<c000a810>] (do_one_initcall+0x100/0x1cc)
 r10:c06fb83c r9:00000000 r8:c06ebef8 r7:c0736000 r6:c0710918 r5:c0710918
 r4:ef2f8f80
[<c000a710>] (do_one_initcall) from [<c06ccddc>] (kernel_init_freeable+0x11c/0x1
ec)
 r10:c06fb83c r9:00000000 r8:0000009a r7:c0736000 r6:c0706bf0 r5:c06fb834
 r4:00000007
[<c06cccc0>] (kernel_init_freeable) from [<c0514c54>] (kernel_init+0x14/0xec)
 r10:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0514c40 r4:c0736000
[<c0514c40>] (kernel_init) from [<c0010458>] (ret_from_fork+0x14/0x3c)
 r4:00000000 r3:ef04e000

Fix up the free_irq() call order and add a new label on the error path.

Fixes: 22d4df8ff3 ("ravb: Add support for r8a7795 SoC")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18 22:03:53 -05:00
Masaru Nagai
d60cf616ec ravb: remove unhandle int cause
This driver does not handle the AVB-DMAC Receive FIFO Warning interrupt
now, so the interrupt should not be enabled.

Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16 15:12:25 -05:00
Masaru Nagai
2452cb0c65 ravb: Fix int mask value overwritten issue
When RX/TX interrupt for Network Control queue and Best Effort queue
is issued at the same time, the interrupt mask of Network Control
queue will be reset when the mask of Best Effort queue is set.
This patch fixes this problem.

Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16 14:44:32 -05:00
Sergei Shtylyov
8e03a5e75c sh_eth: merge sh_eth_free_dma_buffer() into sh_eth_ring_free()
While the ring allocation is done by a single function, sh_eth_ring_init(),
the ring deallocation was split into two functions (almost always called
one after the other) for no good reason. Merge  sh_eth_free_dma_buffer()
into sh_eth_ring_free() which allows us  to save space not only on the
direct calls  of the former function but also on the sh_eth_ring_init()'s
simplified error path...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04 20:59:07 -05:00
Sergei Shtylyov
91d80683fc sh_eth: kill 'ret' variable in sh_eth_ring_init()
The 'ret' local variable in sh_eth_ring_init() serves no useful purpose as
the only  values it gets assigned are 0 and -ENOMEM both of which could be
returned directly...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-04 20:59:07 -05:00
Sergei Shtylyov
f32bfb9a8c sh_eth: use DMA barriers
Commit  7d7355f58b ("sh_eth: Ensure proper ordering of descriptor active
bit write/read") did the right thing  but used too "heavy" barriers while
there were already "lighter" DMA barriers exactly  for this case...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03 15:02:26 -05:00
David S. Miller
73186df8d7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were
fixing the "BH-ness" of the counter bumps whilst in 'net-next'
the functions were modified to take an explicit 'net' parameter.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03 13:41:45 -05:00
Sergei Shtylyov
c238041f51 sh_eth: fix typo in RX descriptor bit name
The correct name of the RX descriptor 0 bit 30 is RDLE (receive descriptor
list end),  not  RDEL.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 23:01:06 -05:00
Simon Horman
c451113291 ravb: use pdev rather than ndev for error messages
This corrects what appear to be typos, making the code consistent with
itself, and allowing meaningful prefixes to be displayed with the errors in
question.

Before:
 (null): failed to initialize MDIO
 (null): Cannot allocate desc base address table (size 176 bytes)

After:
ravb e6800000.ethernet: failed to initialize MDIO
ravb e6800000.ethernet: Cannot allocate desc base address table (size 176 bytes)

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 16:32:37 -05:00
Sergei Shtylyov
b61ed8fdd8 sh_eth: fix WARNING in dma_common_free_remap()
Iff the first dma_alloc_coherent()  call fails in sh_eth_ring_init(), the
following  is printed to the kernel console:

WARNING: CPU: 0 PID: 1 at drivers/base/dma-mapping.c:334 dma_common_free_remap+0x48/0x6c()
trying to free invalid coherent area:   (null)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc7-dirty #969
Hardware name: Generic R8A7791 (Flattened Device Tree)
Backtrace:
[<c0013820>] (dump_backtrace) from [<c00139bc>] (show_stack+0x18/0x1c)
 r6:c0662856 r5:00000009 r4:00000000 r3:00204140
[<c00139a4>] (show_stack) from [<c0227510>] (dump_stack+0x74/0x90)
[<c022749c>] (dump_stack) from [<c0026ef4>] (warn_slowpath_common+0x8c/0xb8)
 r4:ee84dce0 r3:c0712774
[<c0026e68>] (warn_slowpath_common) from [<c0026fc4>] (warn_slowpath_fmt+0x38/0x40)
 r8:ee7f8000 r7:c0734520 r6:00001000 r5:20000008 r4:00000000
[<c0026f90>] (warn_slowpath_fmt) from [<c02df404>] (dma_common_free_remap+0x48/0x6c)
 r3:00000000 r2:c0662871
[<c02df3bc>] (dma_common_free_remap) from [<c001b9fc>] (__arm_dma_free+0xb8/0xd4)
r6:00000001 r5:00000000 r4:00001000 r3:ee8c5584
[<c001b944>] (__arm_dma_free) from [<c001ba68>] (arm_dma_free+0x24/0x2c)
 r10:0000016b r8:00000000 r7:ee9bc830 r6:00000000 r5:00000400 r4:ee9bc800
[<c001ba44>] (arm_dma_free) from [<c032ebf0>] (sh_eth_ring_init+0x110/0x138)
[<c032eae0>] (sh_eth_ring_init) from [<c033179c>] (sh_eth_open+0x94/0x1f4)
 r6:00000000 r5:ee9bcd18 r4:ee9bc800
[<c0331708>] (sh_eth_open) from [<c041bf7c>] (__dev_open+0x84/0x104)
 r6:c0565c50 r5:00000000 r4:ee9bc800
[<c041bef8>] (__dev_open) from [<c041c208>] (__dev_change_flags+0x94/0x13c)
 r7:00001002 r6:00000001 r5:00001003 r4:ee9bc800
[<c041c174>] (__dev_change_flags) from [<c041c2e8>] (dev_change_flags+0x20/0x50)
 r7:c072c8a0 r6:00000138 r5:00001002 r4:ee9bc800
[<c041c2c8>] (dev_change_flags) from [<c06e8d4c>] (ip_auto_config+0x174/0xf7c)
 r8:00001002 r7:c072c8a0 r6:c0700040 r5:00000001 r4:ee9bc800 r3:00000101
[<c06e8bd8>] (ip_auto_config) from [<c000a810>] (do_one_initcall+0x100/0x1c8)
 r10:c06f883c r9:00000000 r8:c06e8bd8 r7:c0734000 r6:c070e918 r5:c070e918
 r4:ee083640
[<c000a710>] (do_one_initcall) from [<c06c9ddc>] (kernel_init_freeable+0x11c/0x1ec)
 r10:c06f883c r9:00000000 r8:00000099 r7:c0734000 r6:c070372c r5:c06f8834
 r4:00000007
[<c06c9cc0>] (kernel_init_freeable) from [<c0514d78>] (kernel_init+0x14/0xec)
 r10:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0514d64 r4:c0734000
[<c0514d64>] (kernel_init) from [<c0010458>] (ret_from_fork+0x14/0x3c)
 r4:00000000 r3:ee84c000

This is because the code jumps to a wrong label and so tries to free yet
unallocated coherent memory.  Fix the *goto* in question.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 15:56:11 -05:00
Sergei Shtylyov
2c94e8567d sh_eth: fix uninitialized arrays in sh_eth_ring_init()
sh_eth_ring_free()  called in the sh_eth_ring_init()'s error path expects
the arrays pointed  to  by 'sh_eth_private::[rt]x_skbuff' to be initialized
with NULLs but they are allocated with just kmalloc_array() and so are left
filled with random data. Use kcalloc() instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 15:56:11 -05:00
David S. Miller
b75ec3af27 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-11-01 00:15:30 -04:00
Sergei Shtylyov
cb3685958d sh_eth: fix RX buffer size calculation
The RX buffer size calulation failed to account for the length granularity
(which is now 32 bytes)...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 18:32:16 -07:00
Sergei Shtylyov
ab8579169b sh_eth: fix RX buffer size alignment
Both  Renesas R-Car and RZ/A1 manuals state that RX buffer  length must be
a multiple of 32 bytes, while the driver  only uses 16 byte granularity...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 18:32:14 -07:00
Kazuya Mizuguchi
22d4df8ff3 ravb: Add support for r8a7795 SoC
This patch supports the r8a7795 SoC by:
- Using two interrupts
  + One for E-MAC
  + One for everything else
  + Both can be handled by the existing common interrupt handler, which
    affords a simpler update to support the new SoC. In future some
    consideration may be given to implementing multiple interrupt handlers
- Limiting the phy speed to 100Mbit/s for the new SoC;
  at this time it is not clear how this restriction may be lifted
  but I hope it will be possible as more information comes to light

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[horms: reworked]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 05:05:21 -07:00
Kazuya Mizuguchi
e2dbb33ad9 ravb: Provide dev parameter to DMA API
This patch is in preparation for using this driver on arm64 where the
implementation of __dma_alloc_coherent fails if a device parameter is not
provided.

Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
[horms: squashed into a single patch]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 05:05:19 -07:00
David S. Miller
06fb4e701b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-08-30 21:45:01 -07:00
Sergei Shtylyov
7a468ac624 sh_eth: propagate platform_get_irq() error upstream
The driver overrides the error returned by platform_get_irq() with -ENODEV
which e.g. precludes the deferred  probing from working. Propagate the real
error code to the driver core instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 22:25:43 -07:00
Sergei Shtylyov
f375339e49 ravb: propagate platform_get_irq() error upstream
The driver overrides the error returned by platform_get_irq() with -ENODEV
which e.g. precludes the deferred  probing from working. Propagate the real
error code to the driver core instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28 22:25:42 -07:00
Sergei Shtylyov
2f45d1902a ravb: minimize TX data copying
Renesas Ethernet AVB controller requires that all data are aligned on 4-byte
boundary.  While it's  easily achievable for  the RX  data with  the help of
skb_reserve() (we even align on 128-byte boundary as recommended by the manual),
we  can't  do the same with the TX data, and it always comes  unaligned from
the networking core. Originally we solved it an easy way, copying all packet
to  a  preallocated  aligned buffer; however, it's enough to copy only up to
3 first bytes from each packet, doing the transfer using 2 TX descriptors
instead of just 1. Here's an implementation of the new  TX algorithm that
significantly reduces the driver's memory requirements.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27 01:22:38 -07:00
David S. Miller
c5e40ee287 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bridge/br_mdb.c

br_mdb.c conflict was a function call being removed to fix a bug in
'net' but whose signature was changed in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-23 00:41:16 -07:00
Sergei Shtylyov
d8b48911fd ravb: fix ring memory allocation
The driver is written as if it can adapt to a low memory situation  allocating
less RX  skbs and TX aligned buffers than the respective RX/TX ring sizes.  In
reality  though  the driver  would malfunction in this case. Stop being overly
smart and just fail in such situation -- this is achieved by moving the memory
allocation from ravb_ring_format() to ravb_ring_init().

We leave dma_map_single() calls in place but make their failure non-fatal
by marking the corresponding RX descriptors  with zero data size which should
prevent DMA to an invalid addresses.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 22:34:27 -07:00
Sergei Shtylyov
06613e38f1 ravb: fix race updating TCCR
The TCCR.TSRQn bit may get clearead after TCCR gets read, so that TCCR write
would get skipped. We don't need to check this bit before setting.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20 20:42:02 -07:00
Sergei Shtylyov
e2370f07cf ravb: do not invalidate cache for RX buffer twice
First, dma_sync_single_for_cpu() shouldn't have been called in the first place
(it's a streaming DMA API), dma_unmap_single() should have been called instead.
Second, dma_unmap_single() call after handing the buffer to napi_gro_receive()
makes little sense.  Moreover desc->dptr might not be valid at this point.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 00:10:47 -07:00
Sergei Shtylyov
aad0d51e93 ravb: kill useless initializers
Some of the local variable intializers in the driver turned out to be pointless,
kill them.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-14 15:37:29 -07:00
Dan Carpenter
5102e23791 renesas: missing unlock on error path
We need to unlock before returning here.

Fixes: a0d2f20650 ('Renesas Ethernet AVB PTP clock driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25 02:13:02 -07:00
Paul Gortmaker
138b15ed87 drivers/net: remove all references to obsolete Ethernet-HOWTO
This howto made sense in the 1990s when users had to manually configure
ISA cards with jumpers or vendor utilities, but with the implementation
of PCI it became increasingly less and less relevant, to the point where
it has been well over a decade since I last updated it.  And there is
no value in anyone else taking over updating it either.

However the references to it continue to spread as boiler plate text
from one Kconfig file into the next.  We are not doing end users any
favours by pointing them at this old document, so lets kill it with
fire, once and for all, to hopefully stop any further spread.

No code is changed in this commit, just Kconfig help text.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 06:50:35 -07:00
Sergei Shtylyov
a0d2f20650 Renesas Ethernet AVB PTP clock driver
Ethernet AVB device includes the gPTP  timer, so we can implement a PTP clock
driver.  We're doing that in a separate file, with  the main Ethernet driver
calling the PTP driver's [de]initialization and interrupt handler functions.
Unfortunately, the clock seems tightly coupled with the AVB-DMAC, so when that
one leaves the operation mode, we have to unregister the PTP clock... :-(

Based on the original patches by Masaru Nagai.

Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11 00:24:12 -07:00
Sergei Shtylyov
c156633f13 Renesas Ethernet AVB driver proper
Ethernet AVB includes an Gigabit Ethernet controller (E-MAC) that is basically
compatible with SuperH Gigabit Ethernet E-MAC.  Ethernet AVB has  a  dedicated
direct memory access controller (AVB-DMAC) that is a new design compared to the
SuperH E-DMAC. The AVB-DMAC is compliant with 3 standards formulated for IEEE
802.1BA: IEEE 802.1AS timing and synchronization protocol, IEEE 802.1Qav real-
time transfer, and the IEEE 802.1Qat stream reservation protocol.

The  driver only supports device tree probing, so the binding document is
included in this patch.

Based on the original patches by Mitsuhiro Kimura.

Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11 00:14:29 -07:00
Ben Hutchings
4398f9c817 sh_eth: Mitigate lost statistics updates
The statistics registers have write-clear behaviour, which means we
will lose any increment between the read and write.  Mitigate this by
only clearing when we read a non-zero value, so we will never falsely
report a total of zero.  This also saves time as we only handle
error statistics here and they won't often be incremented.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 15:40:54 -05:00
Ben Hutchings
e5fd13f476 sh_eth: Optionally log RX and TX status for each completed descriptor
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 15:40:54 -05:00
Ben Hutchings
6b4b4fead3 sh_eth: Implement ethtool register dump operations
There are many different sets of registers implemented by the
different versions of this controller, and we can only expect this to
get more complicated in future.  Limit how much ethtool needs to know
by including an explicit bitmap of which registers are included in the
dump, allowing room for future growth in the number of possible
registers.

As I don't have datasheets for all of these, I've only included
registers that are:

- defined in all 5 register type arrays, or
- used by the driver, or
- documented in the datasheet I have

Add one new capability flag so we can tell whether the RTRATE
register is implemented.

Delete the TSU_ADRL0 and TSU_ADR{H,L}31 definitions, as they weren't
used and the address table is already assumed to be contiguous.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 15:40:54 -05:00
Ben Hutchings
3365711df0 sh_eth: WARN on access to a register not implemented in a particular chip
Currently we may silently read/write a register at offset 0.  Change
this to WARN and then ignore the write or read-back all-ones.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 15:40:54 -05:00
Ben Hutchings
25b77ad774 sh_eth: Implement multicast statistic based on the RFS8 status bit
At least on the R8A7790, RFS8 reflects the RINT8 (multicast) MAC
status flag.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04 15:40:54 -05:00
Ben Hutchings
dacc73e0cf sh_eth: Really fix padding of short frames on TX
My previous fix to clear padding of short frames used skb->len as the
DMA length, assuming that skb_padto() extended skb->len to include the
padding.  That isn't the case; we need to use skb_put_padto() instead.

(This wasn't immediately obvious because software padding isn't
actually needed on the R-Car H2.  We could make it conditional on
which chip is being driven, but it's probably not worth the effort.)

Reported-by: "Violeta Menéndez González" <violeta.menendez@codethink.co.uk>
Fixes: 612a17a54b50 ("sh_eth: Fix padding of short frames on TX")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 21:30:56 -05:00