dsa_slave_phy_setup() finds the phy for the port via device tree and
using of_phy_connect(), or it uses the fall back of taking a phy from
the switch internal mdio bus and calling phy_connect_direct(). Either
way, if a phy is found, phy_attach_direct() is called to attach the
phy to the slave device.
In dsa_slave_create(), a second call to phy_attach() is made. This
results in the warning "PHY already attached". Remove this second,
redundant attaching of the phy.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz says:
====================
bonding and mlx4 fixes for the HA/LAG support and mlx4 reset flow
There are two fixes to the boding + mlx4 HA/LAG support from Moni and a patch from Yishai
which does further hardening of the mlx4 reset support for IB kernel ULPs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver exposes interfaces that directly relate to HW state. Upon fatal
error, consumers of these interfaces (ULPs) that rely on completion of
all their posted work-request could hang, thereby introducing dependencies
in shutdown order. To prevent this from happening, we manage the
relevant resources (CQs, QPs) that are used by the device. Upon a fatal error,
we now generate simulated completions for outstanding WQEs that were not
completed at the time the HW was reset.
It includes invoking the completion event handler for all involved CQs so that
the ULPs will poll those CQs. When polled we return simulated CQEs with
IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and
not wait forever for completions upon receiving remove_one.
The above change requires an extra check in the data path to make sure that when
device is in error state, the simulated CQEs will be returned and no further
WQEs will be posted.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When attaching a QP to a multicast address in bonded mode, there was an
assumption that the port of the QP must be #1. This assumption isn't the
case under the flow which enables maximal usage of the physical ports.
Fix it by always checking the port of the original flow and create the
mirrored flow on the other port.
Fixes: c6215745b6 ('IB/mlx4: Load balance ports in port aggregation mode')
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When queuing work to send the NETDEV_BONDING_INFO netdev event, it's
possible that when the work is executed, the pointer to the slave
becomes invalid. This can happen if between queuing the event and the
execution of the work, the net-device was un-ensvaled and re-enslaved.
Fix that by queuing a work with the data of the slave instead of the
slave structure.
Fixes: 69e6113343 ('net/bonding: Notify state change on slaves')
Reported-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This has not been a busy release for the regulator framework, though we
do have the first parts of some ongoing work from Bjorn Andersson to
allow us to support more complex modern systems with dynamic
configuration of regulators in suspend and idle states.
- Support for device-specific properties on regulator nodes when using
simplified DT parsing in the core from Krzysztof Kozlowski.
- Restructuring of the load tracking code, intended to support future
improvements in this area for more complex system designs.
- New drivers for Maxim MAX77843 and Mediatek MT6397.
- Lots of smaller fixes and improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU2GajAAoJECTWi3JdVIfQa/IH/i2Ktdxq6Y5tu1CvUqmGlA+P
tgpL0CAKn5rH3rM4DnAZ5MFNKZ2QgYpEmdkqcO3qunT7V9luQDBIh1CILUDicCla
T+jcHSt2xypnteScxDUOYlzUpjoHhx2Y2L8qneQoYVgMCevbWx8BhSKNSwOnkJrb
1Tl0s3k3CKdU261aIBSdzZ/bipRV0QFG5jSnc70PXrwX+dRd+utKfvXIC1M4pi3E
AbRWY4G5YMrBPviNoTJRpaiZkvOaTwd6riETZWSSQfs3JQ8dpGCfS00gJHgk0A4E
+2cUIhikhKKkDNkNysVRGPZr4D9q3Fnhek9plzQmwHdSb7w7+j4wmB/p6bRR/ME=
=XPki
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has not been a busy release for the regulator framework, though
we do have the first parts of some ongoing work from Bjorn Andersson
to allow us to support more complex modern systems with dynamic
configuration of regulators in suspend and idle states.
- Support for device-specific properties on regulator nodes when
using simplified DT parsing in the core from Krzysztof Kozlowski.
- Restructuring of the load tracking code, intended to support future
improvements in this area for more complex system designs.
- New drivers for Maxim MAX77843 and Mediatek MT6397.
- Lots of smaller fixes and improvements"
* tag 'regulator-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits)
regulator: max77843: Add max77843 regulator driver
regulator: Fix build breakage on !REGULATOR
regulator: Build sysfs entries with static attribute groups
regulator: qcom-rpm: Make it possible to specify supply
regulator: core: Consolidate drms update handling
regulator: qcom-rpm: signedness bug in probe()
regulator: da9211: Add gpio control for enable/disable of buck
regulator: qcom_rpm: Don't update vreg->uV/mV if rpm_reg_write fails
regulator: lp872x: Remove **regulators from struct lp872x
regulator: da9211: fix unmatched of_node
regulator: Update documentation after renaming function argument
regulator: axp20x: Migrate to regulator core's simplified DT parsing code
regulator: axp20x: Fill regulators_node and of_match descriptor fields
regulator: pfuze100-regulator: add pfuze3000 support
regulator: max77686: Document gpio properties
regulator: Allow parsing custom properties when using simplified DT parsing
regulator: max77686: Add GPIO control
regulator: Copy config passed during registration
regulator: tps65023: Constify struct regmap_config and regulator_ops
regulator: max8649: Constify struct regmap_config and regulator_ops
...
The Processor generation code-named Haswell
added MSR_{CORE | GFX | RING}_PERF_LIMIT_REASONS
to explain when and how the processor limits frequency.
turbostat -v
will now decode these bits.
Each MSR has an "Active" set of bits which describe
current conditions, and a "Logged" set of bits,
which describe what has happened since last cleared.
Turbostat currently doesn't clear the log bits.
Signed-off-by: Len Brown <len.brown@intel.com>
For turbostat to run as non-root, it needs to permissions:
1. read access to /dev/cpu/*/msr
via standard user/group/world file permissions
2. CAP_SYS_RAWIO
eg. # setcap cap_sys_rawio=ep turbostat
Yes, running as root still works.
Signed-off-by: Len Brown <len.brown@intel.com>
The major highlight this release is a refactoring of the core to allow
us to run synchronous transfers in the context of the caller when there
is no contention for the bus. This improves performance in the very
common case by eliminating context switches and reducing the number of
hardware setup and teardown operations we need to perform.
Other changes:
- New drivers for DLN-2 USB-SPI adapter and ST SPI controllers.
- A big round of cleanups, performance and feature improvements
for the xilinx driver from Ricardo Ribalda Delgado.
- A wide range of smaller cleanups, fixes and feature improvements
throughout the subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU2GNgAAoJECTWi3JdVIfQLiYH/0uLN43CunPp0gSWllQ2PY1O
R1QiqXg1fr1uZKRuGy59QF0TkU/JlWPY+tpGiOH1jrnDsoecnWsxDx3YEeuYdV6U
c//UrlK2uvESivbc48zVUTwCsgxsE8apG0JgqLjsfUpqZTEFxFpeSskepSJ2kIUz
bsXHU8Xi0WkLalsk/8Ik8aUvOwVi5EtRE9OMvnU6QPqQMCszgv1TH4UbwbhqwwzZ
U23WbNHQ262XDRwY2LKl/QROULeU5pd9F19wrveKMa42fkbu/e+kk6E3n7/Hd4mV
CUjv1wTCpPZvzh3bTk50uXwA9XQOzv6ddw6jqsgLcV6jS8Ju3Z3Beya3fmdhOl0=
=3ZQr
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The major highlight this release is a refactoring of the core to allow
us to run synchronous transfers in the context of the caller when
there is no contention for the bus. This improves performance in the
very common case by eliminating context switches and reducing the
number of hardware setup and teardown operations we need to perform.
Other changes:
- New drivers for DLN-2 USB-SPI adapter and ST SPI controllers.
- A big round of cleanups, performance and feature improvements for
the xilinx driver from Ricardo Ribalda Delgado.
- A wide range of smaller cleanups, fixes and feature improvements
throughout the subsystem"
* tag 'spi-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits)
spi: mxs: cleanup wait_for_completion return handling
spi: ti-qspi: cleanup wait_for_completion return handling
spi: spi-imx: cleanup wait_for_completion handling
spi: sh-msiof: cleanup wait_for_completion return handling
spi: match var type to return type of wait_for_completion
spi: spi-pxa2xx: only include mach/dma.h for legacy DMA
spi: atmel: cleanup wait_for_completion return handling
spi: fsl-dspi: Remove possible memory leak of 'chip'
spi: sh-msiof: Update calculation of frequency dividing
spi: spidev: Convert buf pointers for 32-bit compat SPI_IOC_MESSAGE(n)
spi/xilinx: Fix access invalid memory on xilinx_spi_tx
spi: Revert "spi/xilinx: Remove iowrite/ioread wrappers"
spi/xilinx: Check number of slaves range
spi/xilinx: Use polling mode on small transfers
spi/xilinx: Remove remaining_words driver data variable
spi/xilinx: Remove iowrite/ioread wrappers
spi/xilinx: Convert bits_per_word in bytes_per_word
spi/xilinx: Convert remainding_bytes in remaining words
spi/xilinx: Make spi_tx and spi_rx simmetric
spi/xilinx: Remove rx_fn and tx_fn pointer
...
Richard Alpe says:
====================
tipc: new compat layer for the legacy NL API
This is a compatibility / transcoding layer for the old netlink API.
It relies on the new netlink API to collect data or perform actions
(dumpit / doit).
The main benefit of this compat layer is that it removes a lot of
complex code from the tipc core as only the new API needs to be able
harness data or perform actions. I.e. the compat layer isn't concerned
with locking or how the internal data-structures look. As long as the
new API stays relatively intact the compat layer should be fine.
The main challenge in this compat layer is the randomness of the legacy
API. Some commands send binary data and some send ASCII data, some are
very picky in optimizing there buffer sizes and some just don't care.
Most legacy commands put there data in a single TLV (data container) but some
segment the data into multiple TLV's. This list of randomness goes on and on..
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc_snprintf() was heavily utilized by the old netlink API which no
longer exists (now netlink compat).
In this patch we swap tipc_snprintf() to the identical scnprintf() in
the only remaining occurrence.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TIPC_CMD_NOOP to compat layer and remove the old framework.
All legacy nl commands are now converted to the compat layer in
netlink_compat.c.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_SHOW_STATS to compat layer. This command does not
have any counterpart in the new API, meaning it now solely exists as a
function in the compat layer.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_GET_NETID to compat dumpit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_SET_NETID to compat doit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_SET_NODE_ADDR to compat doit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_GET_NODES to compat dumpit and remove global node
counter solely used by the legacy API.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_GET_MEDIA_NAMES to compat dumpit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert socket (port) listing to compat dumpit call. If a socket
(port) has publications a second dumpit call is issued to collect them
and format then into the legacy buffer before continuing to process
the sockets (ports).
Command converted in this patch:
TIPC_CMD_SHOW_PORTS
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add functionality for printing a dump header and convert
TIPC_CMD_SHOW_NAME_TABLE to compat dumpit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_RESET_LINK_STATS to compat doit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert setting of link proprieties to compat doit calls.
Commands converted in this patch:
TIPC_CMD_SET_LINK_TOL
TIPC_CMD_SET_LINK_PRI
TIPC_CMD_SET_LINK_WINDOW
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert TIPC_CMD_GET_LINKS to compat dumpit and remove global link
counter solely used by the legacy API.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add functionality for safely appending string data to a TLV without
keeping write count in the caller.
Convert TIPC_CMD_SHOW_LINK_STATS to compat dumpit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a framework for transcoding legacy nl action into actions
(.doit) calls from the new nl API. This is done by converting the
incoming TLV data into netlink data with nested netlink attributes.
Unfortunately due to the randomness of the legacy API we can't do this
generically so each legacy netlink command requires a specific
transcoding recipe. In this case for bearer enable and bearer disable.
Convert TIPC_CMD_ENABLE_BEARER and TIPC_CMD_DISABLE_BEARER into doit
compat calls.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a framework for dumping netlink data from the new netlink
API and formatting it to the old legacy API format. This is done by
looping the dump data and calling a format handler for each entity, in
this case a bearer.
We dump until either all data is dumped or we reach the limited buffer
size of the legacy API. Remember, the legacy API doesn't scale.
In this commit we convert TIPC_CMD_GET_BEARER_NAMES to use the compat
layer.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new netlink API is no longer "v2" but rather the standard API and
the legacy API is now "nl compat". We split them into separate
start/stop and put them in different files in order to further
distinguish them.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sample code lacks an example of TRACE_EVENT_CONDITION, and it
has been expressed to me that this feature for TRACE_EVENT is not
well known and not used when it could be.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A very quiet release for regmap this time around:
- Fix an endianness issue for I2C devices connected via SMBus where
we were getting two layers both trying to do endianness handling.
- Use a union to reduce the size of the regmap struct.
- A couple of smaller fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU2GDZAAoJECTWi3JdVIfQId0H/3dsylUYN0uYzDA1fKy0At5E
7dmKbWkp1Ab62wQYC59a5KH1OgdZe/mWf3x9kxEZlqcmS15OPEuqs7g+BNoAi3Fj
ysmIbKRpJIoZs+XrgBGPCunchLq6rOmtcVaQEUQZZnKg31kQCBhMoPip1QCT5Qn7
UGoYgwP3O7TPVxJDZXA3gCGZER/Jr4Bhrkb3qJKzofpoRvzqSeqKuDJdwOTy7dzx
w1xMQWUlrPuCKHe3HA5uD4ZPHtNsN23APd7spmu/HhqXtN1nCIxh5/0z4qKVGvLO
h3xSCTtOTJZI2kYEFDn3/6DFWQokp90fwBKaG8EtixtD/8M9OQA7tuW1mtsUgOE=
=nPfp
-----END PGP SIGNATURE-----
Merge tag 'regmap-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A very quiet release for regmap this time around:
- Fix an endianness issue for I2C devices connected via SMBus where
we were getting two layers both trying to do endianness handling.
- Use a union to reduce the size of the regmap struct.
- A couple of smaller fixes"
* tag 'regmap-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix i2c word access when using SMBus access functions
regmap: Export regmap_get_val_endian
regmap: ac97: Clean up indentation
regmap: correct the description of structure element in reg_field
regmap: Move spinlock_flags into the union
Minor improvements, cleanup and fixes in various drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JZfe
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Explicit support for ina231 added to ina2xx driver.
Minor improvements, cleanup and fixes in various drivers"
* tag 'hwmon-for-linus-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tmp102) add hibernation callbacks
hwmon: (ads2828) Only keep data in device data structure if needed
hwmon: (ads2828) Convert to use regmap
hwmon: (jc42) Allow negative hysteresis temperatures
hwmon: (adc128d818) Do proper sign extension
hwmon: (ad7314) Do proper sign extension
hwmon: (abx500) Fix format string warnings
hwmon: (jc42) Fix integer overflow when writing hysteresis value
hwmon: (jc42) Fix integer overflow
hwmon: (jc42) Use sign_extend32 for sign extension
hwmon: (ina2xx) Add ina231 compatible string
hwmon: (ina2xx) use DIV_ROUND_CLOSEST() to avoid rounding errors
hwmon: (ina2xx) remove an unnecessary dev_get_drvdata() result check
hwmon: (ina2xx) implement update_interval attribute for ina226
hwmon: (ina2xx) make shunt resistance configurable at run-time
hwmon: (ina2xx) don't accept shunt values greater than the calibration factor
hwmon: (ina2xx) remove a stray new line
hwmon: (ina2xx) reinitialize the chip in case it's been reset
hwmon: (nct7802) Constify struct regmap_config
There was a bad typo in commit 43759d4f42 ("random: use an improved
fast_mix() function") and I didn't notice because it "looked right", so
I saw what I expected to see when I reviewed it.
Only months later did I look and notice it's not the Threefish-inspired
mix function that I had designed and optimized.
Mea Culpa. Each input bit still has a chance to affect each output bit,
and the fast pool is spilled *long* before it fills, so it's not a total
disaster, but it's definitely not the intended great improvement.
I'm still working on finding better rotation constants. These are good
enough, but since it's unrolled twice, it's possible to get better
mixing for free by using eight different constants rather than repeating
the same four.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sample code in samples/trace_events/ is extremely out of date and does
not show all the new fields that have been added since the sample code
was written. As most people are unaware of these new fields, adding sample
code and explanations of those fields should help out.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
iwlwifi:
* more work for new devices (4165 / 8260)
* cleanups / improvemnts in rate control
* fixes for TDLS
* major statistics work from Johannes - more to come
* improvements for the fw error dump infrastructure
* usual amount of small fixes here and there (scan, D0i3 etc...)
* add support for beamforming
* enable stuck queue detection for iwlmvm
* a few fixes for EBS scan
* fixes for various failure paths
* improvements for TDLS Offchannel
wil6210:
* performance tuning
* some AP features
brcm80211:
* rework some code in SDIO part of the brcmfmac driver related to
suspend/resume that were found doing stress testing
* in PCIe part scheduling of worker thread needed to be relaxed
* minor fixes and exposing firmware revision information to
user-space, ie. ethtool.
mwifiex:
* enhancements for change virtual interface handling
* remove coupling between netdev and FW supported interface
combination, now conversion from any type of supported interface
types to any other type is possible
* DFS support in AP mode
ath9k:
* fix calibration issues on some boards
* Wake-on-WLAN improvements
ath10k:
* add support for qca6174 hardware
* enable RX batching to reduce CPU load
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJU1fUoAAoJEG4XJFUm622bnjMH/25f2kyLAJSLJmiIhpEcYlNJ
CJMAYsSTcqhKaMEbx742StUUDH3pa1oV4mQ5csVa2QJIsS90WzPpB1eRnNtQ69Nj
89Zfwa6bbX0TXDgw1Aa28NewPY/3xWpCjI03HBQaMIncToWv3/dzNUr0bEmIuBds
wsr5Y+fy80VKnkoXG7XzGFOqmxxFwNS+UF3M1WNtQ+xcr9rK3/LLxyWFy84S9UIe
4lVOb+df91YFIJeLs28/hfTiRhvV0fWIbupGv8UhuBMho+F0dpLvra+3xksEqALu
4+AzI0j9GjqFfMzbmRBcPcT4Rl37nLmvQ+7XokrFgAYS5zp7OGylOMU3nHyvkuY=
=iL8v
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2015-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Major changes:
iwlwifi:
* more work for new devices (4165 / 8260)
* cleanups / improvemnts in rate control
* fixes for TDLS
* major statistics work from Johannes - more to come
* improvements for the fw error dump infrastructure
* usual amount of small fixes here and there (scan, D0i3 etc...)
* add support for beamforming
* enable stuck queue detection for iwlmvm
* a few fixes for EBS scan
* fixes for various failure paths
* improvements for TDLS Offchannel
wil6210:
* performance tuning
* some AP features
brcm80211:
* rework some code in SDIO part of the brcmfmac driver related to
suspend/resume that were found doing stress testing
* in PCIe part scheduling of worker thread needed to be relaxed
* minor fixes and exposing firmware revision information to
user-space, ie. ethtool.
mwifiex:
* enhancements for change virtual interface handling
* remove coupling between netdev and FW supported interface
combination, now conversion from any type of supported interface
types to any other type is possible
* DFS support in AP mode
ath9k:
* fix calibration issues on some boards
* Wake-on-WLAN improvements
ath10k:
* add support for qca6174 hardware
* enable RX batching to reduce CPU load
Conflicts:
drivers/net/wireless/rtlwifi/pci.c
Conflict resolution is to get rid of the 'end' label and keep
the rest.
Signed-off-by: David S. Miller <davem@davemloft.net>
The code seems to work. The protocol looks stable. The kernel's
version defaults can be overridden by rpc.nfsd arguments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case
of dual link. In the dual link implementation, the bit is correctly set
or unset for hardcoded PORT_A, but for bit update the register base value
is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will
read base value from PORT_C and program for PORT_A. Mostly in case of dual
link all other bit values should be same, but logically we should read from
PORT_A. So hardcode to read initial value from PORT_A as well.
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The vfree() function performs input parameter validation.
Thus the NULL pointer test around vfree() calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently the cleanup of all error cases are open-coded. Introduce a
common exit path and labels.
Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The thin-pool target doesn't display the data block size as part of
its table status, unlike the dm-cache target, so there is no need for
dm_pool_get_data_block_size().
This was found using cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the obsolete url in the CONFIG_DM_CRYPT help text.
Signed-off-by: Loic Pefferkorn <loic@loicp.eu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
To be future-proof and for better readability the time comparison
is modified to use time_after_eq() instead of plain, error-prone math.
Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
To be future-proof and for better readability the time comparisons are modified
to use time_in_range() and time_after() instead of plain, error-prone math.
Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
My static checker complains that if "num_raid_params" is UINT_MAX then
the "if (num_raid_params + 1 > argc) {" check doesn't work as intended.
The other change is that I moved the "if (argc != (num_raid_devs * 2))"
condition forward a few lines so it was before the call to
context_alloc(). If we had an integer overflow inside that function
then it would lead to an immediate crash.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Otherwise replacing the multipath target with the error target fails:
device-mapper: ioctl: can't change device type after initial table load.
The error target was mistakenly considered to be target type
DM_TYPE_REQUEST_BASED rather than DM_TYPE_MQ_REQUEST_BASED even if the
target it was to replace was of type DM_TYPE_MQ_REQUEST_BASED.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For blk-mq request-based DM the responsibility of allocating a cloned
request is transfered from DM core to the target type. Doing so
enables the cloned request to be allocated from the appropriate
blk-mq request_queue's pool (only the DM target, e.g. multipath, can
know which block device to send a given cloned request to).
Care was taken to preserve compatibility with old-style block request
completion that requires request-based DM _not_ acquire the clone
request's queue lock in the completion path. As such, there are now 2
different request-based DM target_type interfaces:
1) the original .map_rq() interface will continue to be used for
non-blk-mq devices -- the preallocated clone request is passed in
from DM core.
2) a new .clone_and_map_rq() and .release_clone_rq() will be used for
blk-mq devices -- blk_get_request() and blk_put_request() are used
respectively from these hooks.
dm_table_set_type() was updated to detect if the request-based target is
being stacked on blk-mq devices, if so DM_TYPE_MQ_REQUEST_BASED is set.
DM core disallows switching the DM table's type after it is set. This
means that there is no mixing of non-blk-mq and blk-mq devices within
the same request-based DM table.
[This patch was started by Keith and later heavily modified by Mike]
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For blk-mq request-based DM the responsibility of allocating a cloned
request will be transfered from DM core to the target type.
To prepare for conditionally using this new model the original
request's 'special' now points to the dm_rq_target_io because the
clone is allocated later in the block layer rather than in DM core.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Switch to having request-based DM enqueue all prep'ed requests into work
processed by another thread. This allows request-based DM to invoke
block APIs that assume interrupt enabled context (e.g. blk_get_request)
and is a prerequisite for adding blk-mq support to request-based DM.
The new kernel thread is only initialized for request-based DM devices.
multipath_map() is now always in irq enabled context so change multipath
spinlock (m->lock) locking to always disable interrupts.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Request-based DM support for blk-mq devices requires that
dm_rq_target_io structures not be allocated with an embedded request
structure. The request-based DM target (e.g. dm-multipath) must
allocate the request from the blk-mq devices' request_queue using
blk_get_request().
The unfortunate side-effect of this change is old-style request-based DM
support will no longer use contiguous memory for the dm_rq_target_io and
request structures for each clone.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This looked like an odd regression from
commit ec5cc0f9b0
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 12 10:28:55 2014 +0100
drm/i915: Restrict GPU boost to the RCS engine
but in reality it undercovered a much older coherency bug. The issue that
boosting the GPU frequency on the BCS ring was masking was that we could
wake the CPU up after completion of a BCS batch and inspect memory prior
to the write cache being fully evicted. In order to serialise the
breadcrumb interrupt (and so ensure that the CPU's view of memory is
coherent) we need to perform a post-sync operation in the MI_FLUSH_DW.
v2: Fix all the MI_FLUSH_DW (bsd plus the duplication in execlists).
Also fix the invalidate_domains mask in gen8_emit_flush() for ring !=
VCS.
Testcase: gpuX-rcs-gpu-read-after-write
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
