PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR, just use
PTR_ERR_OR_ZERO directly.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
RHBZ 1336264
When we extend a file we must also force the size to be updated.
This fixes an issue with holetest in xfs-tests which performs the following
sequence :
1, create a new file
2, use fallocate mode==0 to populate the file
3, mmap the file
4, touch each page by reading the mmapped region.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1760879
Fix an oops in match_prepath() by making sure that the prepath string is not
NULL before we pass it into strcmp().
This is similar to other checks we make for example in cifs_root_iget()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounting with "modefromsid" mount parm most servers will require
that some default permissions are given to users in the ACL on newly
created files, files created with the new 'sd context' - when passing in
an sd context on create, permissions are not inherited from the parent
directory, so in addition to the ACE with the special SID which contains
the mode, we also must pass in an ACE allowing users to access the file
(GENERIC_ALL for authenticated users seemed like a reasonable default,
although later we could allow a mount option or config switch to make
it GENERIC_ALL for EVERYONE special sid).
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This is needed for backup/restore scenarios among others.
Add extended attribute "system.cifs_ntsd" (and alias "system.smb3_ntsd")
to allow for setting owner and DACL in the security descriptor. This is in
addition to the existing "system.cifs_acl" and "system.smb3_acl" attributes
that allow for setting DACL only. Add support for setting creation time and
dos attributes using set_file_info() calls to complement the existing
support for getting these attributes via query_path_info() calls.
Signed-off-by: Boris Protopopov <bprotopopov@hotmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
fs/cifs/smb2pdu.c: In function 'SMB2_query_directory':
fs/cifs/smb2pdu.c:4444:26: warning:
variable 'server' set but not used [-Wunused-but-set-variable]
struct TCP_Server_Info *server;
It is not used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Starting from 4a367dc044, we must set the mount options based on the
DFS full path rather than the resolved target, that is, cifs_mount()
will be responsible for resolving the DFS link (cached) as well as
performing failover to any other targets in the referral.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reported-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 4a367dc044 ("cifs: Add support for failover in cifs_mount()")
Link: https://lore.kernel.org/linux-cifs/39643d7d-2abb-14d3-ced6-c394fab9a777@prodrive-technologies.com
Tested-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
static analysis with Coverity detected an issue with the following
commit:
Author: Paulo Alcantara (SUSE) <pc@cjr.nz>
Date: Wed Dec 4 17:38:03 2019 -0300
cifs: Avoid doing network I/O while holding cache lock
Addresses-Coverity: ("Uninitialized pointer read")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
copy_ref_data() may return error, it should be
returned to upstream caller.
Fixes: 03535b72873b ("cifs: Avoid doing network I/O while holding cache lock")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When creating or updating a cache entry, we need to get an DFS
referral (get_dfs_referral), so avoid holding any locks during such
network operation.
To prevent that, do the following:
* change cache hashtable sync method from RCU sync to a read/write
lock.
* use GFP_ATOMIC in memory allocations.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't acquire volume lock while refreshing the DFS cache because
cifs_reconnect() may call dfs_cache_update_vol() while we are walking
through the volume list.
To prevent that, make vol_info refcounted, create a temp list with all
volumes eligible for refreshing, and then use it without any locks
held.
Besides, replace vol_lock with a spinlock and protect cache_ttl from
concurrent accesses or changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Just do the trivial path validation in get_normalized_path().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add helpers for finding TCP connections that are good candidates for
being used by DFS refresh worker.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The DFS cache API is mostly used with heap allocated strings.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Do some renaming and code cleanup.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't use iov_iter::type directly, but rather use the new accessor
functions that have been added. This allows the .type field to be split
and rearranged without the need to update the filesystems.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix two places where we need to adjust down the max response size for
ioctl when it is used together with compounding.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Combine the initial SMB2_Open and the first SMB2_Query_Directory in a compound.
This shaves one round-trip of each directory listing, changing it from 4 to 3
for small directories.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Fixes coccicheck warning:
fs/cifs/cifssmb.c:4622:3-22: WARNING: Assignment of 0/1 to bool variable
fs/cifs/cifssmb.c:4756:3-22: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fixes coccicheck warning:
fs/cifs/smb2ops.c:807:2-36: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When listing a directory with thounsands of files and most of them are
reparse points, we simply marked all those dentries for revalidation
and then sending additional (compounded) create/getinfo/close requests
for each of them.
Instead, upon receiving a response from an SMB2_QUERY_DIRECTORY
(FileIdFullDirectoryInformation) command, the directory entries that
have a file attribute of FILE_ATTRIBUTE_REPARSE_POINT will contain an
EaSize field with a reparse tag in it, so we parse it and mark the
dentry for revalidation only if it is a DFS or a symlink.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Clang warns:
../fs/cifs/smb2file.c:70:3: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
if (oparms->tcon->use_resilient) {
^
../fs/cifs/smb2file.c:66:2: note: previous statement is here
if (rc)
^
1 warning generated.
This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.
Fixes: 592fafe644 ("Add resilienthandles mount parm")
Link: https://github.com/ClangBuiltLinux/linux/issues/826
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_tdis() checks if a root handle is valid in order to decide
whether it needs to close the handle or not. However if another
thread has reference for the handle, it may end up with putting
the reference twice. The extra reference that we want to put
during the tree disconnect is the reference that has a directory
lease. So, track the fact that we have a directory lease and
close the handle only in that case.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Ran into an intermittent crash in
SMB2_open_init+0x2f6/0x970
due to oparms.cifs_sb not being initialized when called from:
smb2_compound_op+0x45d/0x1690
Zero the whole oparms struct in the compounding path before setting up the
oparms so we don't risk any uninitialized fields.
Fixes: fdef665ba4 ("smb3: fix mode passed in on create for modetosid mount option")
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=gey9
-----END PGP SIGNATURE-----
Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:
- one fix for stable (oops during oplock break)
- two timestamp fixes including important one for updating mtime at
close to avoid stale metadata caching issue on dirty files (also
improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
wire)
- two fixes for "modefromsid" mount option for file create (now
allows mode bits to be set more atomically and accurately on create
by adding "sd_context" on create when modefromsid specified on
mount)
- two fixes for multichannel found in testing this week against
different servers
- two small cleanup patches"
* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve check for when we send the security descriptor context on create
smb3: fix mode passed in on create for modetosid mount option
cifs: fix possible uninitialized access and race on iface_list
cifs: Fix lookup of SMB connections on multichannel
smb3: query attributes on file close
smb3: remove unused flag passed into close functions
cifs: remove redundant assignment to pointer pneg_ctxt
fs: cifs: Fix atime update check vs mtime
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.
Add check for that mount flag before calling ad_sd_context in
open init.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When using the special SID to store the mode bits in an ACE (See
http://technet.microsoft.com/en-us/library/hh509017(v=ws.10).aspx)
which is enabled with mount parm "modefromsid" we were not
passing in the mode via SMB3 create (although chmod was enabled).
SMB3 create allows a security descriptor context to be passed
in (which is more atomic and thus preferable to setting the mode
bits after create via a setinfo).
This patch enables setting the mode bits on create when using
modefromsid mount option. In addition it fixes an endian
error in the definition of the Control field flags in the SMB3
security descriptor. It also makes the ACE type of the special
SID better match the documentation (and behavior of servers
which use this to store mode bits in SMB3 ACLs).
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
Basically, the problem is that negative pinned dentries require
careful treatment - unless ->d_lock is locked or parent is held at
least shared, another thread can make them positive right under us.
Most of the uses turned out to be safe - the main surprises as far as
filesystems are concerned were
- race in dget_parent() fastpath, that might end up with the caller
observing the returned dentry _negative_, due to insufficient
barriers. It is positive in memory, but we could end up seeing the
wrong value of ->d_inode in CPU cache. Fixed.
- manual checks that result of lookup_one_len_unlocked() is positive
(and rejection of negatives). Again, insufficient barriers (we
might end up with inconsistent observed values of ->d_inode and
->d_flags). Fixed by switching to a new primitive that does the
checks itself and returns ERR_PTR(-ENOENT) instead of a negative
dentry. That way we get rid of boilerplate converting negatives
into ERR_PTR(-ENOENT) in the callers and have a single place to
deal with the barrier-related mess - inside fs/namei.c rather than
in every caller out there.
The guts of pathname resolution *do* need to be careful - the race
found by Ritesh is real, as well as several similar races.
Fortunately, it turns out that we can take care of that with fairly
local changes in there.
The tree-wide audit had not been fun, and I hate the idea of repeating
it. I think the right approach would be to annotate the places where
we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
catch regressions. But I'm still not sure what would be the least
invasive way of doing that and it's clearly the next cycle fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namei.c: fix missing barriers when checking positivity
fix dget_parent() fastpath race
new helper: lookup_positive_unlocked()
fs/namei.c: pull positivity check into follow_managed()
iface[0] was accessed regardless of the count value and without
locking.
* check count before accessing any ifaces
* make copy of iface list (it's a simple POD array) and use it without
locking.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
With the addition of SMB session channels, we introduced new TCP
server pointers that have no sessions or tcons associated with them.
In this case, when we started looking for TCP connections, we might
end up picking session channel rather than the master connection,
hence failing to get either a session or a tcon.
In order to fix that, this patch introduces a new "is_channel" field
to TCP_Server_Info structure so we can skip session channels during
lookup of connections.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since timestamps on files on most servers can be updated at
close, and since timestamps on our dentries default to one
second we can have stale timestamps in some common cases
(e.g. open, write, close, stat, wait one second, stat - will
show different mtime for the first and second stat).
The SMB2/SMB3 protocol allows querying timestamps at close
so add the code to request timestamp and attr information
(which is cheap for the server to provide) to be returned
when a file is closed (it is not needed for the many
paths that call SMB2_close that are from compounded
query infos and close nor is it needed for some of
the cases where a directory close immediately follows a
directory open.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
close was relayered to allow passing in an async flag which
is no longer needed in this path. Remove the unneeded parameter
"flags" passed in on close.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The pointer pneg_ctxt is being initialized with a value that is never
read and it is being updated later with a new value. The assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
According to the comment in the code and commit log, some apps
expect atime >= mtime; but the introduced code results in
atime==mtime. Fix the comparison to guard against atime<mtime.
Fixes: 9b9c5bea0b ("cifs: do not return atime less than mtime")
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: stfrench@microsoft.com
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently when the client creates a cifsFileInfo structure for
a newly opened file, it allocates a list of byte-range locks
with a pointer to the new cfile and attaches this list to the
inode's lock list. The latter happens before initializing all
other fields, e.g. cfile->tlink. Thus a partially initialized
cifsFileInfo structure becomes available to other threads that
walk through the inode's lock list. One example of such a thread
may be an oplock break worker thread that tries to push all
cached byte-range locks. This causes NULL-pointer dereference
in smb2_push_mandatory_locks() when accessing cfile->tlink:
[598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038
...
[598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs]
[598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs]
...
[598428.945834] Call Trace:
[598428.945870] ? cifs_revalidate_mapping+0x45/0x90 [cifs]
[598428.945901] cifs_oplock_break+0x13d/0x450 [cifs]
[598428.945909] process_one_work+0x1db/0x380
[598428.945914] worker_thread+0x4d/0x400
[598428.945921] kthread+0x104/0x140
[598428.945925] ? process_one_work+0x380/0x380
[598428.945931] ? kthread_park+0x80/0x80
[598428.945937] ret_from_fork+0x35/0x40
Fix this by reordering initialization steps of the cifsFileInfo
structure: initialize all the fields first and then add the new
byte-range lock list to the inode's lock list.
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of things to
convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just need
to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a variety of
systems (and to not take over huge systems entirely in particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need to
load a lot of paper.
- A script and documentation making it easy for maintainers to add Link:
tags at commit time.
Also included is the removal of a bunch of spurious CR characters.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl3j5B0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtBcH/jIN2cO8/0YW2rjVT+1G6ytSdFUKx5WJ/lpf
5uBeCvuCeYhtCB6+BgnXvjykJ7jDW11/NJNjWqz/gsvD5l5FJK1rXarI/oz2Klyi
kcPtDmBF/ki4wz9qXzEpa0vg8LXdjeys50S1vE75qCzxZoPP7YjuRbPnLrlIJukv
JbDVi4p9kxgeHfRB4+BHOe5rFwA3mMmaxKNIX34Y+UUO2KZ0g/yUi1bAaQwQAdt+
PsORmkVQ8Puh3K9xRIr7dYlcWBlBiPqzYdvDgTVxSjrxdK6wjYjSgVk2VjC5MBUN
mTSTWgyfsIcD/76/s8tq7ZRl2fw+SkCSkFo79Rb/hJwDTb7Vnng=
=LPBr
-----END PGP SIGNATURE-----
Merge tag 'docs-5.5a' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"Here are the main documentation changes for 5.5:
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of
things to convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just
need to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a
variety of systems (and to not take over huge systems entirely in
particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need
to load a lot of paper.
- A script and documentation making it easy for maintainers to add
Link: tags at commit time.
Also included is the removal of a bunch of spurious CR characters"
* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
docs: remove a bunch of stray CRs
docs: fix up the maintainer profile document
libnvdimm, MAINTAINERS: Maintainer Entry Profile
Maintainer Handbook: Maintainer Entry Profile
MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
docs, parallelism: Rearrange how jobserver reservations are made
docs, parallelism: Do not leak blocking mode to other readers
docs, parallelism: Fix failure path and add comment
Documentation: Remove bootmem_debug from kernel-parameters.txt
Documentation: security: core.rst: fix warnings
Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
Documentation/translation: Use Korean for Korean translation title
docs/memory-barriers.txt: Remove remaining references to mmiowb()
docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
Documentation/kokr: Kill all references to mmiowb()
docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
docs: Add initial documentation for devfreq
Documentation: Document how to get links with git am
docs: Add request_irq() documentation
...
We accidentally messed up the indenting on this if statement.
Fixes: 16c696a6c300 ("CIFS: refactor cifs_get_inode_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Update signing key of first channel whenever generating the master
sigining/encryption/decryption keys rather than only in cifs_mount().
This also fixes reconnect when re-establishing smb sessions to other
servers.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to skip reconnects on all SMB2_IOCTL commands due to SMB3+
FSCTL_VALIDATE_NEGOTIATE_INFO - which made sense since we're still
establishing a SMB session.
However, when refresh_cache_worker() calls smb2_get_dfs_refer() and
we're under reconnect, SMB2_ioctl() will not be able to get a proper
status error (e.g. -EHOSTDOWN in case we failed to reconnect) but an
-EAGAIN from cifs_send_recv() thus looping forever in
refresh_cache_worker().
Fixes: e99c63e4d8 ("SMB3: Fix deadlock in validate negotiate hits reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Suggested-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We don't care about module aliasing validation in
cifs_compose_mount_options(..., is_smb3) when finding the root SMB
session of an DFS namespace in order to refresh DFS referral cache.
The following issue has been observed when mounting with '-t smb3' and
then specifying 'vers=2.0':
...
Nov 08 15:27:08 tw kernel: address conversion returned 0 for FS0.WIN.LOCAL
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_query((null),FS0.WIN.LOCAL,13,(null))
Nov 08 15:27:08 tw kernel: [kworke] call request_key(,FS0.WIN.LOCAL,)
Nov 08 15:27:08 tw kernel: [kworke] ==> dns_resolver_cmp(FS0.WIN.LOCAL,FS0.WIN.LOCAL)
Nov 08 15:27:08 tw kernel: [kworke] <== dns_resolver_cmp() = 1
Nov 08 15:27:08 tw kernel: [kworke] <== dns_query() = 13
Nov 08 15:27:08 tw kernel: fs/cifs/dns_resolve.c: dns_resolve_server_name_to_ip: resolved: FS0.WIN.LOCAL to 192.168.30.26
===> Nov 08 15:27:08 tw kernel: CIFS VFS: vers=2.0 not permitted when mounting with smb3
Nov 08 15:27:08 tw kernel: fs/cifs/dfs_cache.c: CIFS VFS: leaving refresh_tcon (xid = 26) rc = -22
...
Fixes: 5072010ccf ("cifs: Fix DFS cache refresher for DFS links")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
* show server&TCP states for extra channels
* mention if an interface has a channel connected to it
In this version three of the patch, fixed minor printk format
issue pointed out by the kbuild robot.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Number of requests in_send and the number of waiters on sendRecv
are useful counters in various cases, move them from
CONFIG_CIFS_STATS2 to be on by default especially with multichannel
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
