When strncpy() is called with source and destination strings the same
length, gcc 8 warns that there may be an unterminated string. Using
strlcpy() rather than strncpy() forces a null at the end and quiets the
warning.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Array iw_operation_mode is defined but is never used hence it is
redundant and can be removed. This array has been like this since
the driver was added back in 2010
Cleans up clang warning:
warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are the big staging/iio patches for 4.19-rc1.
Lots of churn here, with tons of cleanups happening in staging drivers,
a removal of an old crypto driver that no one was using (skein), and the
addition of some new IIO drivers. Also added was a "gasket" driver from
Google that needs loads of work and the erofs filesystem.
Even with adding all of the new drivers and a new filesystem, we are
only adding about 1000 lines overall to the kernel linecount, which
shows just how much cleanup happened, and how big the unused crypto
driver was.
All of these have been in the linux-next tree for a while now with no
reported issues.
Note, you will have a merge problem with a device tree IIO file and the
MAINTAINERS file, both resolutions are easy, just take all changed.
There will be a skein file merge issue as well, but that file got
deleted so just drop that.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g+2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwGACfQZz3Ncvc7thHkZytxxqQnbx5JpkAn0yV5SvF
yVXG9SA9yCTKVjYczZjZ
=6t/x
-----END PGP SIGNATURE-----
Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here are the big staging/iio patches for 4.19-rc1.
Lots of churn here, with tons of cleanups happening in staging
drivers, a removal of an old crypto driver that no one was using
(skein), and the addition of some new IIO drivers. Also added was a
"gasket" driver from Google that needs loads of work and the erofs
filesystem.
Even with adding all of the new drivers and a new filesystem, we are
only adding about 1000 lines overall to the kernel linecount, which
shows just how much cleanup happened, and how big the unused crypto
driver was.
All of these have been in the linux-next tree for a while now with no
reported issues"
* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
staging:rtl8192u: Remove unused macro definitions - Style
staging:rtl8192u: Add spaces around '+' operator - Style
staging:rtl8192u: Remove stale comment - Style
staging: rtl8188eu: remove unused mp_custom_oid.h
staging: fbtft: Add spaces around / - Style
staging: fbtft: Erases some repetitive usage of function name - Style
staging: fbtft: Adjust some empty-line problems - Style
staging: fbtft: Removes one nesting level to help readability - Style
staging: fbtft: Changes gamma table to define.
staging: fbtft: A bit more information on dev_err.
staging: fbtft: Fixes some alignment issues - Style
staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
staging: rtl8188eu: remove unused array dB_Invert_Table
staging: rtl8188eu: remove whitespace, add missing blank line
staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
staging: rtl8188eu: remove whitespace - style
staging: rtl8188eu: cleanup block comment - style
staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
staging: rtlwifi: refactor rtl_get_tcb_desc
...
Do not define again the polynomial but use header with existing define.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer 'nic' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'nic' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support
and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere.
This is derived from my internal patch, parts of which Luca
had sent upstream.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove unnecessary parentheses around variables to conform to the Linux
kernel coding style. Issue found using checkpatch.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '|' to conform to the Linux
kernel coding style. Issue found using checkpatch.
CHECK: spaces preferred around that '|'.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around arithmetic operator '+', to conform to the Linux
kernel coding style. Issue found using checkpatch.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove extra blank line(s) to conform to the Linux
kernel coding style. Issue found using checkpatch.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete/Add tabs and spaces to align the code to fix the
checkpatch issue: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace a mix of tabs and spaces indentation by tabs only.
Fixed checkpatch warning "Statements should start on a tabstop".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtl8717_set_it() takes an unsigned int pointer as length,
fixed signedness in code using it.
Sparse warnings:
drivers/staging/rtl8712/ieee80211.c:191:53: warning: incorrect type in argument 5 (different signedness)
drivers/staging/rtl8712/ieee80211.c:191:53: expected unsigned int [usertype] *frlen
drivers/staging/rtl8712/ieee80211.c:191:53: got int *<noident>
drivers/staging/rtl8712/ieee80211.c:197:57: warning: incorrect type in argument 5 (different signedness)
drivers/staging/rtl8712/ieee80211.c:197:57: expected unsigned int [usertype] *frlen
drivers/staging/rtl8712/ieee80211.c:197:57: got int *<noident>
drivers/staging/rtl8712/ieee80211.c:199:63: warning: incorrect type in argument 5 (different signedness)
drivers/staging/rtl8712/ieee80211.c:199:63: expected unsigned int [usertype] *frlen
drivers/staging/rtl8712/ieee80211.c:199:63: got int *<noident>
drivers/staging/rtl8712/ieee80211.c:202:67: warning: incorrect type in argument 5 (different signedness)
drivers/staging/rtl8712/ieee80211.c:202:67: expected unsigned int [usertype] *frlen
drivers/staging/rtl8712/ieee80211.c:202:67: got int *<noident>
drivers/staging/rtl8712/ieee80211.c:206:73: warning: incorrect type in argument 5 (different signedness)
drivers/staging/rtl8712/ieee80211.c:206:73: expected unsigned int [usertype] *frlen
drivers/staging/rtl8712/ieee80211.c:206:73: got int *<noident>
drivers/staging/rtl8712/ieee80211.c:209:75: warning: incorrect type in argument 5 (different signedness)
drivers/staging/rtl8712/ieee80211.c:209:75: expected unsigned int [usertype] *frlen
drivers/staging/rtl8712/ieee80211.c:209:75: got int *<noident>
Signed-off-by: Stefano Manni <stefano.manni@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed r8712_get_ie, r8712_get_wpa_ie, r8712_get_wpa2_ie
to have a length as unsigned int pointer instead of signed.
Sparse warnings:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:173:27: warning: incorrect type in argument 3 (different signedness)
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:173:27: expected signed int *len
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:173:27: got unsigned int *<noident>
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:613:35: warning: incorrect type in argument 3 (different signedness)
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:613:35: expected signed int *len
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:613:35: got unsigned int *<noident>
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1411:67: warning: incorrect type in argument 3 (different signedness)
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1411:67: expected signed int *len
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1411:67: got unsigned int *<noident>
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1992:33: warning: incorrect type in argument 2 (different signedness)
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1992:33: expected int *rsn_ie_len
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1992:33: got unsigned int *<noident>
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1998:33: warning: incorrect type in argument 2 (different signedness)
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1998:33: expected int *rsn_ie_len
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1998:33: got unsigned int *<noident>
drivers/staging/rtl8712/rtl871x_mlme.c:1701:59: warning: incorrect type in argument 3 (different signedness)
drivers/staging/rtl8712/rtl871x_mlme.c:1701:59: expected signed int *len
drivers/staging/rtl8712/rtl871x_mlme.c:1701:59: got unsigned int *<noident>
Signed-off-by: Stefano Manni <stefano.manni@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value stored to rfPath during initialization is never read, the
following switch statement re-assigns it a new value on all the
case and default paths. Hence the initialization is redundant and
can be removed.
Cleans up clang warning:
drivers/staging/rtl8712/rtl871x_mp.c:544:5: warning: Value stored to
'rfPath' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes various coding style issues in the rtl8712 module as
noted by checkpatch.pl related to dereferencing over multiple lines.
It fixes the following checkpatch.pl warning:
WARNING: Avoid multiple line dereference - prefer %s
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a coding style issues in the rtl8712 module as noted
by checkpatch.pl regarding the returned error code.
It fixes the following checkpatch.pl warning:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a coding style issues in the rtl8712 module as noted
by checkpatch.pl where an unnecessary else is used.
It fixes the following checkpatch.pl warning:
WARNING: else is not generally useful after a break or return
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes various coding style issues in the rtl8712 module as
noted by checkpatch.pl related to indentation.
It fixes the following checkpatch.pl warning:
WARNING: suspect code indent for conditional statements
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes various coding style issues in the rtl8712 module as
noted by checkpatch.pl by reducing the characters per line to under
80.
It fixes the following checkpatch.pl warning:
WARNING: line over 80 characters
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup below checkpatch issues:
ERROR:CODE_INDENT: code indent should use tabs where possible
1409: FILE: rtl871x_security.c:1409:
+ from_timer(padapter, t, securitypriv.tkip_timer);$
WARNING:LEADING_SPACE: please, no spaces at the start of a line
1409: FILE: rtl871x_security.c:1409:
+ from_timer(padapter, t, securitypriv.tkip_timer);$
Signed-off-by: Neil Singh <neil2468@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable val32 is being assigned a zero value that is never read
since val32 is being updated immediately afterwards. Remove this
redundant assignment, cleans up clang warning:
drivers/staging/rtl8712/hal_init.c:339:2: warning: Value stored
to 'val32' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd atomisp
cleanups (take the media tree's version).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
g3ioPBqmqC/2DSbldr2o
=/ebw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the explicit "if (val != NULL)" with if (val).
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checkpatch emits WARNING: Avoid multiple line dereference.
Checkpatch warning is fixed by:
* Trivial indentation improvement and
* Using += instead of + helps shortening the statement.
Signed-off-by: Prasant Jalan <prasant.jalan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the warnings from checkpatch.pl on file rtl8712/mlme_linux.c
Avoided multiple line dereferences in the code
Signed-off-by: Tejaswini Poluri <tejaswinipoluri3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the condition: "pdata->length < 32" first, to be able to return immediately
in case of error and then continue with the rest of the function without one
extra indentation level.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier l;
@@
*if
(e)
S
else
{ rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Invert if statements to be able to return immediately in case of error,
and to avoid additional else branch.
Improve layout of function since there is more horizontal space now.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier l;
@@
*if
(e)
S
else
{ rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Negate if condition to be able to return immediately in case of error,
and then continue with the rest of the function
without extra indentation level.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier
l;
@@
*if
(e)
S
else
{ rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Invert if statements to be able to return immediately in case of error,
and to avoid additional else branch, and then continue with the rest
of the function without excessive indentation.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier l;
@@
*if (e)
S
else { rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
