Instead of iterating over all the available trap policers, only perform
the tests with three policers: The first, the last and the one in the
middle of the range. On a Spectrum-3 system, this reduces the run time
from almost an hour to a few minutes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The nexthop objects tests configure dummy reachable neighbours so that
the nexthops will have a MAC address and be programmed to the device.
Since these are dummy reachable neighbours, they can be transitioned by
the kernel to a failed state if they are around for too long. This can
happen, for example, if the "TIMEOUT" variable is configured with a too
high value.
Make the tests more robust by configuring the neighbours as permanent,
so that the tests do not depend on the configured timeout value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of mlxsw-specific selftests currently detect whether they are run
on a compatible machine, and bail out silently when not. These tests are
however done in a somewhat impenetrable manner by directly comparing PCI
IDs against a blacklist or a whitelist, and bailing out silently if the
machine is not compatible.
Instead, add a helper, mlxsw_only_on_spectrum(), which allows specifying
the supported machines in a human-readable manner. If the current machine
is incompatible, the helper emits a SKIP message and returns an error code,
based on which the caller can gracefully bail out in a suitable way. This
allows a more readable conditions such as:
mlxsw_only_on_spectrum 2+ || return
Convert all existing open-coded guards to the new helper. Also add two new
guards to do_mark_test() and do_drop_test(), which are supported only on
Spectrum-2+, but the corresponding check was not there.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is a bit strange in that it is perhaps more manual than
others: it does not transmit a clear OK/FAIL verdict, because user space
does not have synchronous feedback from the kernel. If a hardware access
fails, it is in deferred context.
Nonetheless, on sja1105 I have used it successfully to find and solve a
concurrency issue, so it can be used as a starting point for other
driver maintainers too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These programs are useful, but not all selftests require them.
Additionally, on embedded boards without package management (things like
buildroot), installing mausezahn or jq is not always as trivial as
downloading a package from the web.
So it is actually a bit annoying to require programs that are not used.
Introduce options that can be set by scripts to not enforce these
dependencies. For compatibility, default to "yes".
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Guillaume Nault <gnault@redhat.com>
Cc: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is a bit strange in that it is perhaps more manual than
others: it does not transmit a clear OK/FAIL verdict, because user space
does not have synchronous feedback from the kernel. If a hardware access
fails, it is in deferred context.
Nonetheless, on sja1105 I have used it successfully to find and solve a
concurrency issue, so it can be used as a starting point for other
driver maintainers too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These programs are useful, but not all selftests require them.
Additionally, on embedded boards without package management (things like
buildroot), installing mausezahn or jq is not always as trivial as
downloading a package from the web.
So it is actually a bit annoying to require programs that are not used.
Introduce options that can be set by scripts to not enforce these
dependencies. For compatibility, default to "yes".
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Guillaume Nault <gnault@redhat.com>
Cc: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and can.
We'll have one more fix for a socket accounting regression, it's still
getting polished. Otherwise things look fine.
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv", there are
valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv abort sessions on
receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails, prevent
stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues"
* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
usbnet: sanity check for maxpacket
net: enetc: make sure all traffic classes can send large frames
net: enetc: fix ethtool counter name for PM0_TERR
ptp: free 'vclock_index' in ptp_clock_release()
sfc: Don't use netif_info before net_device setup
sfc: Export fibre-specific supported link modes
net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
net/mlx5e: IPsec: Fix a misuse of the software parser's fields
net/mlx5e: Fix vlan data lost during suspend flow
net/mlx5: E-switch, Return correct error code on group creation failure
net/mlx5: Lag, change multipath and bonding to be mutually exclusive
ice: Add missing E810 device ids
igc: Update I226_K device ID
e1000e: Fix packet loss on Tiger Lake and later
e1000e: Separate TGP board type from SPT
ptp: Fix possible memory leak in ptp_clock_register()
net: stmmac: Fix E2E delay mechanism
nfc: st95hf: Make spi remove() callback return zero
net: hns3: disable sriov before unload hclge layer
net: hns3: fix vf reset workqueue cannot exit
...
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter fixes for net:
1) Crash due to missing initialization of timer data in
xt_IDLETIMER, from Juhee Kang.
2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum.
3) Skip netdev events on netns removal, from Florian Westphal.
4) Add testcase to show port shadowing via UDP, also from Florian.
5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to
unsafe access to non-linear skbuff, from Xin Long.
6) Make net/ipv4/vs/debug_level read-only from non-init netns,
from Antoine Tenart.
7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh
also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This checks that various qdisc configurations either are or are not
offloaded.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In RHEL's gating selftests we've encountered memory corruption in the
uffd event test even with upstream kernel:
# ./userfaultfd anon 128 4
nr_pages: 32768, nr_pages_per_cpu: 32768
bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729)
bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877)
bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699)
bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196)
testing uffd-wp with pagemap (pgsize=4096): done
testing uffd-wp with pagemap (pgsize=2097152): done
testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963)
ERROR: faulting process failed (errno=0, line=1117)
It can be easily reproduced when global thp enabled, which is the
default for RHEL.
It's also known as a side effect of commit 0db282ba2c ("selftest: use
mmap instead of posix_memalign to allocate memory", 2021-07-23), which
is imho right itself on using mmap() to make sure the addresses will be
untagged even on arm.
The problem is, for each test we allocate buffers using two
allocate_area() calls. We assumed these two buffers won't affect each
other, however they could, because mmap() could have found that the two
buffers are near each other and having the same VMA flags, so they got
merged into one VMA.
It won't be a big problem if thp is not enabled, but when thp is
agressively enabled it means when initializing the src buffer it could
accidentally setup part of the dest buffer too when there's a shared THP
that overlaps the two regions. Then some of the dest buffer won't be
able to be trapped by userfaultfd missing mode, then it'll cause memory
corruption as described.
To fix it, do release_pages() after initializing the src buffer.
Since the previous two release_pages() calls are after
uffd_test_ctx_clear() which will unmap all the buffers anyway (which is
stronger than release pages; as unmap() also tear town pgtables), drop
them as they shouldn't really be anything useful.
We can mark the Fixes tag upon 0db282ba2c as it's reported to only
happen there, however the real "Fixes" IMHO should be 8ba6e86408, as
before that commit we'll always do explicit release_pages() before
registration of uffd, and 8ba6e86408 changed that logic by adding
extra unmap/map and we didn't release the pages at the right place.
Meanwhile I don't have a solid glue anyway on whether posix_memalign()
could always avoid triggering this bug, hence it's safer to attach this
fix to commit 8ba6e86408.
Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com
Fixes: 8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each test")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Li Wang <liwan@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tracing fixes for 5.15:
- Fix defined but not use warning/error for osnoise function
- Fix memory leak in event probe
- Fix memblock leak in bootconfig
- Fix the API of event probes to be like kprobes
- Added test to check removal of event probe API
- Fix recordmcount.pl for nds32 failed build
* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
selftests/ftrace: Update test for more eprobe removal process
tracing: Fix event probe removal from dynamic events
tracing: Fix missing * in comment block
bootconfig: init: Fix memblock leak in xbc_make_cmdline()
tracing: Fix memory leak in eprobe_register()
tracing: Fix missing osnoise tracer on max_latency
The current default does not allowing additional subflows, mostly
as a safety restriction to avoid uncontrolled resource consumption
on busy servers.
Still the system admin and/or the application have to opt-in to
MPTCP explicitly. After that, they need to change (increase) the
default maximum number of additional subflows.
Let set that to reasonable default, and make end-users life easier.
Additionally we need to update some self-tests accordingly.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that applications binding listening sockets to VRFs without
specifying TCP_MD5SIG_FLAG_IFINDEX will work as expected. This would
be broken if __tcp_md5_do_lookup always made a strict comparison on
l3index. See this email:
https://lore.kernel.org/netdev/209548b5-27d2-2059-f2e9-2148f5a0291b@gmail.com/
Applications using tcp_l3mdev_accept=1 and a single global socket (not
bound to any interface) also should have a way to specify keys that are
only for the default VRF, this is done by --force-bind-key-ifindex
without otherwise binding to a device.
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These options allow explicit control over the TCP_MD5SIG_FLAG_IFINDEX
flag instead of always setting it based on binding to an interface.
Do this by converting to getopt_long because nettest has too many
single-character flags already and getopt_long is widely used in
selftests.
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This should not be there.
Fixes: 2de03b4523 ("selftests: netfilter: add flowtable test script")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a variant of ECN test that uses qdisc marked counter (supported on
Spectrum-3 and above) instead of the aggregate ethtool ecn_marked counter.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The output behavior for undefined bits is now directly tested inside the bash
script. Trying to set an undefined bit should be refused.
The input behavior for undefined bits has been removed due to the fact that we
would need another sender allowed to set undefined bits.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add do_mark_test(), which is to do_ecn_test() like do_drop_test() is to
do_red_test(): meant to test that actions on the RED mark qevent block are
offloaded, and executed on ECN-marked packets.
The test splits install_qdisc() into its constituents, install_root_qdisc()
and install_qdisc_tcX(). This is in order to test that when mirroring is
enabled on one TC, the other TC does not mirror.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These variables are cut'n'pasted from other functions in the file and not
actually used.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case that demonstrates port shadowing via UDP.
ns2 sends packet to ns1, from source port used by a udp service on the
router, ns0. Then, ns1 sends packet to ns0:service, but that ends up getting
forwarded to ns2.
Also add three test cases that demonstrate mitigations:
1. disable use of $port as source from 'unstrusted' origin
2. make the service untracked. This prevents masquerade entries
from having any effects.
3. add forced PAT via 'random' mode to translate the "wrong" sport
into an acceptable range.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As part of adding same test for GRE tunnel with IPv6 underlay, missing
bytes for key were found.
mausezahn does not fill zeros between two colons, so send them
explicitly. For example, use "00:00:00:E9:" instead of ":E9:"
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, an
optional improvement was found - call ipip_payload_get from
ecn_payload_get, so do not duplicate the code which creates the payload.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of adding same test for GRE tunnel with IPv6 underlay, wrong
alignments were found, fix them.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 underlay support was added, add test to check that "decap_error" trap
is triggered under the right conditions and that devlink counters increase.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use hierarchical model - the tunnel is bound to a device
in a different VRF.
These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that check IPv6-in-IPv6, IPv4-in-IPv6 and MTU change of GRE
tunnel. The tests use flat model - overlay and underlay share the same VRF.
These tests can be run with TC_FLAG=skip_sw, so then they will verify
that packets go through hardware as part of enacp and decap phases.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add function that checks that at least X packets hit the tc rule.
There are cases that it is not possible to catch only the interesting
packets, so then, it is possible to send many packets and verify that at
least this amount of packets hit the rule.
This function will be used in the next patch for general tc rule that
can be used to test both software and hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TC_FLAG value to tests topology.
This flag supposed to be skip_sw/skip_hw which means do not filter by
software/hardware.
This can be useful for adding tests to forwarding directory, and be able
to verify that packets go through the hardware.
When the flag is not set or set to 'skip_hw', tests can still be executed
with veth pairs.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull Kselftest fixes from Shuah Khan:
"A fix to implicit declaration warns in drivers/dma-buf test"
* tag 'linux-kselftest-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: drivers/dma-buf: Fix implicit declaration warns
This patch adds support for testing the encap (ip6ip6) mode of IOAM.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.
$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1
Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There will be one more VLAN modification selftest added, this time for
egress. Rename the one that exists right now to be more specific.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like when I wrote the selftests I was using a network manager that
brought up the ports automatically. In order to not rely on that, let
the script open them up.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
bpf-next 2021-10-02
We've added 85 non-merge commits during the last 15 day(s) which contain
a total of 132 files changed, 13779 insertions(+), 6724 deletions(-).
The main changes are:
1) Massive update on test_bpf.ko coverage for JITs as preparatory work for
an upcoming MIPS eBPF JIT, from Johan Almbladh.
2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool,
with driver support for i40e and ice from Magnus Karlsson.
3) Add legacy uprobe support to libbpf to complement recently merged legacy
kprobe support, from Andrii Nakryiko.
4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky.
5) Support saving the register state in verifier when spilling <8byte bounded
scalar to the stack, from Martin Lau.
6) Add libbpf opt-in for stricter BPF program section name handling as part
of libbpf 1.0 effort, from Andrii Nakryiko.
7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov.
8) Fix skel_internal.h to propagate errno if the loader indicates an internal
error, from Kumar Kartikeya Dwivedi.
9) Fix build warnings with -Wcast-function-type so that the option can later
be enabled by default for the kernel, from Kees Cook.
10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it
otherwise errors out when encountering them, from Toke Høiland-Jørgensen.
11) Teach libbpf to recognize specialized maps (such as for perf RB) and
internally remove BTF type IDs when creating them, from Hengqi Chen.
12) Various fixes and improvements to BPF selftests.
====================
Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more kvm fixes from Paolo Bonzini:
"Small x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Ensure all migrations are performed when test is affined
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
x86/kvmclock: Move this_cpu_pvti into kvmclock.h
selftests: KVM: Don't clobber XMM register when read
KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
There are several test cases in the bpf directory are still using
exit 0 when they need to be skipped. Use kselftest framework skip
code instead so it can help us to distinguish the return status.
Criterion to filter out what should be fixed in bpf directory:
grep -r "exit 0" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210929051250.13831-1-po-hsu.lin@canonical.com
Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs. The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.
==== Test Assertion Failure ====
rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
pid=10127 tid=10127 errno=4 - Interrupted system call
1 0x00000000004018e5: main at rseq_test.c:227
2 0x00007fcc8fc66bf6: ?? ??:0
3 0x0000000000401959: _start at ??:?
Only performed 4 KVM_RUNs, task stalled too much?
Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210929234112.1862848-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cleanup code uses while (cpu++ < cpu_cnt) for closing fds, which means
it starts iterating from 1 for closing fds. If the first fd is -1, it
skips over it and closes garbage fds (typically zero) in the remaining
array. This leads to test failures for future tests when they end up
storing fd 0 (as the slot becomes free due to close(0)) in ldimm64's BTF
fd, ending up trying to match module BTF id with vmlinux.
This was observed as spurious CI failure for the ksym_module_libbpf and
module_attach tests. The test ends up closing fd 0 and breaking libbpf's
assumption that module BTF fd will always be > 0, which leads to the
kernel thinking that we are pointing to a BTF ID in vmlinux BTF.
Fixes: 025bd7c753 (selftests/bpf: Add test for bpf_get_branch_snapshot)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210927145941.1383001-12-memxor@gmail.com
