Add a new option and support for Instruction Tracing Snapshot Mode.
When the new option is selected, no AUX area tracing data is captured
until a signal (SIGUSR2) is received.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for making snapshots of AUX area tracing data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the PERF_RECORD_ITRACE_START event type. This event can
be used to determine the pid and tid that are running when Instruction
Tracing starts. Generally that information would come from a
sched_switch event but, at the start, no sched_switch events may yet
have been recorded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the PERF_RECORD_AUX event type.
PERF_RECORD_AUX is a new kernel event that records when new data lands
in the AUX buffer. Currently it is assumed that AUX data follows the
same ring buffer conventions used by the perf events buffer, and
consequently the AUX event is not processed during recording.
It is processed during session processing so that the information in the
'flags' member is made available.
The format of PERF_RECORD_AUX is outlined in the linux/perf_events.h
header file. The 'flags' are also enumerated.
Intel PT and Intel BTS use the flag named PERF_AUX_FLAG_TRUNCATED to
determine if data has been lost because the buffer became full as perf
was not able to empty it fast enough.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add AUX area tracing option 'x' to synthesize events for transactions.
This will be used by Intel PT to synthesize an event record for each TSX
start, commit or abort.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add build option NO_AUXTRACE to exclude compiling support for AUX area
tracing. Support for both recording and processing is excluded and by
implication any future additions such as Intel PT and Intel BTS will
also not be compiled in with this option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to include all buildids when a perf.data file contains AUX area
tracing data because we do not decode the trace for that purpose because
it would take too long.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an index of AUX area tracing events within a perf.data file.
perf record uses a special user event PERF_RECORD_FINISHED_ROUND to
enable sorting of events in chunks instead of having to sort all events
altogether.
AUX area tracing events contain data that can span back to the very
beginning of the recording period. i.e. they do not obey the rules of
PERF_RECORD_FINISHED_ROUND.
By adding an index, AUX area tracing events can be found in advance and
the PERF_RECORD_FINISHED_ROUND approach works as usual.
The index is recorded with the auxtrace feature in the perf.data file.
A session reads the index but does not process it. An AUX area decoder
can queue all the AUX area data in advance using
auxtrace_queues__process_index() or otherwise process the index in some
custom manner.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unwittingly the itrace options for perf report ended up below the
Overhead Calculation section. Move it back with the other options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is 'perf kmem' support caller statistics for page. Unlike slab case,
the tracepoints in page allocator don't provide callsite info. So it
records with callchain and extracts callsite info.
Note that the callchain contains several memory allocation functions
which has no meaning for users. So skip those functions to get proper
callsites. I used following regex pattern to skip the allocator
functions:
^_?_?(alloc|get_free|get_zeroed)_pages?
This gave me a following list of functions:
# perf kmem record --page sleep 3
# perf kmem stat --page -v
...
alloc func: __get_free_pages
alloc func: get_zeroed_page
alloc func: alloc_pages_exact
alloc func: __alloc_pages_direct_compact
alloc func: __alloc_pages_nodemask
alloc func: alloc_page_interleave
alloc func: alloc_pages_current
alloc func: alloc_pages_vma
alloc func: alloc_page_buffers
alloc func: alloc_pages_exact_nid
...
The output looks mostly same as --alloc (I also added callsite column
to that) but groups entries by callsite. Currently, the order,
migrate type and GFP flag info is for the last allocation and not
guaranteed to be same for all allocations from the callsite.
---------------------------------------------------------------------------------------------
Total_alloc (KB) | Hits | Order | Mig.type | GFP flags | Callsite
---------------------------------------------------------------------------------------------
1,064 | 266 | 0 | UNMOVABL | 000000d0 | __pollwait
52 | 13 | 0 | UNMOVABL | 002084d0 | pte_alloc_one
44 | 11 | 0 | MOVABLE | 000280da | handle_mm_fault
20 | 5 | 0 | MOVABLE | 000200da | do_cow_fault
20 | 5 | 0 | MOVABLE | 000200da | do_wp_page
16 | 4 | 0 | UNMOVABL | 000084d0 | __pmd_alloc
16 | 4 | 0 | UNMOVABL | 00000200 | __tlb_remove_page
12 | 3 | 0 | UNMOVABL | 000084d0 | __pud_alloc
8 | 2 | 0 | UNMOVABL | 00000010 | bio_copy_user_iov
4 | 1 | 0 | UNMOVABL | 000200d2 | pipe_write
4 | 1 | 0 | MOVABLE | 000280da | do_wp_page
4 | 1 | 0 | UNMOVABL | 002084d0 | pgd_alloc
---------------------------------------------------------------------------------------------
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1429592107-1807-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Accept multiple filter options. Each filters are combined by logical-or.
E.g. --filter abc* --filter *def is same as --filter abc*|*def
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150424094748.23967.63355.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add strfilter__string to recover rules string from strfilter. This will
be good for debugging.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150424094746.23967.52434.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, perf probe considers patterns including a '.' to be a file.
However, this causes problems on powerpc ABIv1 where all functions have
a leading '.':
$ perf probe -F | grep schedule_timeout_interruptible
.schedule_timeout_interruptible
$ perf probe .schedule_timeout_interruptible
Semantic error :File always requires line number or lazy pattern.
Error: Command Parse Error.
Fix this:
- by checking the probe pattern in more detail, and
- skipping leading dot if one exists when creating/deleting events.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/db680f7cb11c4452b632f908e67151f3aa0f4602.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The YYLTYPE_IS_TRIVIAL is defined in the Build file, but unlike
pmu-bison.c, gcc complained about it for parse-events-bison.c:
CC util/parse-events-bison.o
In file included from util/parse-events.y:16:
util/parse-events-bison.h:101:1: error: "YYLTYPE_IS_TRIVIAL" redefined
<command-line>: error: this is the location of the previous definition
make[3]: *** [util/parse-events-bison.o] Error 1
Comments from Jiri Olsa:
"Reason is the parse error handling that was added just recently: it
adds YYLTYPE type (which is not present in pmu-bison.h), so
YYLTYPE_IS_TRIVIAL gets redefined, which is ok in F20 that handle the
error via '-w' option, but it's not ok for RHEL6 where the '-w' does not
work for this kind of error."
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1430322871-18107-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for decoding an AUX area assuming it contains instruction
tracing data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1429903807-20559-4-git-send-email-adrian.hunter@intel.com
[ Do not use -Z as an alternative to --itrace ]
[ Fixed initialization of itrace_synth_opts struct fields on older gcc versions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a file contains AUX area tracing data then always allow fields 'addr'
and 'cpu' to be selected as options for perf script. This is necessary
because AUX area decoding may synthesize events with that information.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1429903807-20559-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reference counting of the mmap buffer does not work correctly when there
is an AUX area mmap also.
In snapshot mode it is not easy to know if the AUX area mmap buffer
contains usefull information. Equally the evlist does not know if the
recording is in sanpshot mode anyway.
Consequently, for now just assume the AUX area mmap always has data,
which will just cause the mmap buffer to remain mmapped for the duration
of the recording.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1429903807-20559-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On powerpc ABIv2, if no debug-info is found and we use kallsyms, we need
to fixup the function entry to point to the local entry point. Use
offset of 8 since current toolchains always generate 2 instructions (8
bytes).
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/92253021e77a104b23b615c8c23bf9501dfe60bf.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use symbol table lookups by default if DWARF is not necessary, since
powerpc ABIv2 encodes local entry points in the symbol table and the
function entry address in DWARF may not be appropriate for kprobes, as
described here:
https://sourceware.org/bugzilla/show_bug.cgi?id=17638
"The DWARF address ranges deliberately include the *whole* function,
both global and local entry points."
...
"If you want to set probes on a local entry point, you should look up
the symbol in the main symbol table (not DWARF), and check the st_other
bits; they will indicate whether the function has a local entry point,
and what its offset from the global entry point is. Note that GDB does
the same when setting a breakpoint on a function entry."
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/88a10e22f4aaba2aef812824ca4b10d7beeea012.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ppc64 ELF ABIv2 has a Global Entry Point (GEP) and a Local Entry Point
(LEP). For purposes of probing, we need the LEP - the offset to which is
encoded in st_other.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/ab9cc5e2b9de4cbaaf50f6ef2346a6a81100bad1.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow perf probe to work on ppc ABIv1 without the need to specify the
leading dot '.' for functions. 'perf probe do_fork' works with this
patch.
We do this by changing how symbol name comparison works on ppc ABIv1 -
we simply ignore and skip over the initial dot, if one exists, during
symbol name comparison.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/652a8f3bfa919bd02a1836a128370eaed59b4a34.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the proper prefix when ignoring SyS symbols on ppc ABIv1. While at
it, generalize symbol selection so architectures can implement their own
logic.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/adf1f98b121ecaf292777fe5cc69fe1038feabce.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If using the symbol table, symbol addresses are not being fixed up
properly, resulting in probes being placed at wrong addresses:
# perf probe do_fork
Added new event:
probe:do_fork (on do_fork)
You can now use it in all perf tools, such as:
perf record -e probe:do_fork -aR sleep 1
# cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_fork _text+635952
# printf "%x" 635952
9b430
# grep do_fork /boot/System.map
c0000000000ab430 T .do_fork
Fix by checking for ELF type ET_DYN used by ppc64 kernels.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/41392bb856ef62d929995e0b61967689b7915207.1430217967.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In verbose mode perf bench numa shows also GB/s speed, system and user cpu
time for each particular thread. Using of getrusage() can provide much more
per process or per thread stats in future.
Signed-off-by: Petr Holasek <pholasek@redhat.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1429198699-25039-3-git-send-email-pholasek@redhat.com
[ Rename 'usage' variable to not shadow util.h's usage() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parsing /proc/cpuinfo is a fiddly, arch-dependent business and a recent
change to get it working for Sparc broke arm and arm64 platforms.
Use sysconf to determine the number of online CPUs only parsing
/proc/cpuinfo when sysconf is not available.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150423140454.GJ1652@arm.com
[ Made it fall back to parsing /proc when getconf not found ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the --children option changes the output of perf report (and perf
top) it sometimes confuses users. Add more words and examples to help
understanding of the option's behavior - and how to disable it ;-).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1429684425-14987-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating metrics values for guest and host, so we get proper values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing metrics context calculation to allow more than 2 types of
context.
Following patches will add support for the rest of the exclude_* bits so
we need separate array element for all context combinations.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently in perf IPC and other metrics cannot be directly shown
separately for both user and kernel in a single run. The problem was
that the metrics matching code did not check event qualifiers.
With this patch the following case works correctly.
% perf stat -e cycles:k,cycles:u,instructions:k,instructions:u true
Performance counter stats for 'true':
531,718 cycles:k
203,895 cycles:u
338,151 instructions:k # 0.64 insns per cycle
105,961 instructions:u # 0.52 insns per cycle
0.002989739 seconds time elapsed
Previously it would misreport the ratios because they were matching the
wrong value.
The patch is fairly big, but quite mechanic as it just adds context
indexes everywhere.
Reported-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-3-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This comes from the desire of having -e/--expr to have the same meaning
as for 'strace', while other perf tools use it for --event, which
'trace' honours, i.e. all perf tools have --event in common, but trace
uses -e for strace's --expr.
Clarify it in the --help output.
Reported-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5j94bcsdmcbeu2xthnzsj60d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix perf-probe --del option to delete all matched probes in both
of kprobes and uprobes at once.
When we have 2 or more events on different binaries as below,
----
# ./perf probe -l
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.17
----
Trying to remove all event with '*' just removes kprobe events at first.
----
# ./perf probe -d \*
Removed event: probe:vfs_read
----
And in 2nd try, it removes all uprobe events.
----
# ./perf probe -d \*
Removed event: probe_libc:malloc
----
This fixes to remove all event at once as below.
----
# ./perf probe -d \*
Removed event: probe:vfs_read
Removed event: probe_libc:malloc
----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150423134614.26128.18106.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --funcs option should be given exclusively. This adds
PARSE_OPT_EXCUSIVE flag on --funcs (-F) option.
Without this, 'perf probe --funcs -l' just shows the list of probes.
With this, it shows error message correctly.
This also fixes the help message and the documentation.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150423134612.26128.58189.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing symbolic events processing to report back error.
$ perf record -e 'cycles/period=krava/' ls
event syntax error: '../period=krava/'
\___ expected numeric value
$ perf record -e 'cycles/name=1/' ls
event syntax error: '..es/name=1/'
\___ expected string value
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing static terms like 'name,period,config,config1..' processing to
report back error.
$ perf record -e 'cpu/event=1,name=1/' ls
event syntax error: '..=1,name=1/'
\___ expected string value
$ perf record -e 'cpu/event=1,period=krava/' ls
event syntax error: '..,period=krava/'
\___ expected numeric value
$ perf record -e 'cpu/config=krava1/' ls
event syntax error: '../config=krava1/'
\___ expected numeric value
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-8-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing event's term processing to report back error, like:
$ perf record -e 'cpu/even=0x1/' ls
event syntax error: 'cpu/even=0x1/'
\___ unknown term
valid terms: pc,any,inv,edge,cmask,event,in_tx,ldlat,umask,in_tx_cp,offcore_rsp,config,config1,config2,name,period,branch_type
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-7-git-send-email-jolsa@kernel.org
[ Renamed 'error' variables to 'err', not to clash with util.h error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Saving the terms location within term struct, so it could be used later
for report.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing parse_events_add_pmu interface to allow propagating of the
parse_events_error info.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not sure why we allowed the fail state, but it's wrong. Wrong type for
'name' term can cause segfault, and there's probably more fun hidden.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429729824-13932-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>