This patch will evaluate the message length if a dlm opts header can fit
in before accessing it if a node lookup fails. The invalid sequence
error means that the version detection failed and an unexpected message
arrived. For debugging such situation the type of arrived message is
important to know.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes a race between mhandle deletion in case of receiving an
acknowledge and flush of all pending mhandle in cases of an timeout or
resetting node states.
Fixes: 489d8e559c ("fs: dlm: add reliable connection if reconnect")
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch renames DEFAULT_BUFFER_SIZE to DLM_MAX_SOCKET_BUFSIZE and
LOWCOMMS_MAX_TX_BUFFER_LEN to DLM_MAX_APP_BUFSIZE as they are proper
names to define what's behind those values. The DLM_MAX_SOCKET_BUFSIZE
defines the maximum size of buffer which can be handled on socket layer,
the DLM_MAX_APP_BUFSIZE defines the maximum size of buffer which can be
handled by the DLM application layer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are spelling mistake in log messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds functionality to debug midcomms per connection state
inside a comms directory which is similar like dlm configfs. Currently
there exists the possibility to read out two attributes which is the
send queue counter and the version of each midcomms node state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduce to make a tcp lowcomms connection reliable even if
reconnects occurs. This is done by an application layer re-transmission
handling and sequence numbers in dlm protocols. There are three new dlm
commands:
DLM_OPTS:
This will encapsulate an existing dlm message (and rcom message if they
don't have an own application side re-transmission handling). As optional
handling additional tlv's (type length fields) can be appended. This can
be for example a sequence number field. However because in DLM_OPTS the
lockspace field is unused and a sequence number is a mandatory field it
isn't made as a tlv and we put the sequence number inside the lockspace
id. The possibility to add optional options are still there for future
purposes.
DLM_ACK:
Just a dlm header to acknowledge the receive of a DLM_OPTS message to
it's sender.
DLM_FIN:
This provides a 4 way handshake for connection termination inclusive
support for half-closed connections. It's provided on application layer
because SCTP doesn't support half-closed sockets, the shutdown() call
can interrupted by e.g. TCP resets itself and a hard logic to implement
it because the othercon paradigm in lowcomms. The 4-way termination
handshake also solve problems to synchronize peer EOF arrival and that
the cluster manager removes the peer in the node membership handling of
DLM. In some cases messages can be still transmitted in this time and we
need to wait for the node membership event.
To provide a reliable connection the node will retransmit all
unacknowledges message to it's peer on reconnect. The receiver will then
filtering out the next received message and drop all messages which are
duplicates.
As RCOM_STATUS and RCOM_NAMES messages are the first messages which are
exchanged and they have they own re-transmission handling, there exists
logic that these messages must be first. If these messages arrives we
store the dlm version field. This handling is on DLM 3.1 and after this
patch 3.2 the same. A backwards compatibility handling has been added
which seems to work on tests without tcpkill, however it's not recommended
to use DLM 3.1 and 3.2 at the same time, because DLM 3.2 tries to fix long
term bugs in the DLM protocol.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch makes the void pointer handle for lowcomms functionality per
message and not per page allocation entry. A refcount handling for the
handle was added to keep the message alive until the user doesn't need
it anymore.
There exists now a per message callback which will be called when
allocating a new buffer. This callback will be guaranteed to be called
according the order of the sending buffer, which can be used that the
caller increments a sequence number for the dlm message handle.
For transition process we cast the dlm_mhandle to dlm_msg and vice versa
until the midcomms layer will implement a specific dlm_mhandle structure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch prepares hooks to redirect to the midcomms layer which will
be used by the midcomms re-transmit handling.
There exists the new concept of stateless buffers allocation and
commits. This can be used to bypass the midcomms re-transmit handling. It
is used by RCOM_STATUS and RCOM_NAMES messages, because they have their
own ping-like re-transmit handling. As well these two messages will be
used to determine the DLM version per node, because these two messages
are per observation the first messages which are exchanged.
Cluster manager events for node membership are added to add support for
half-closed connections in cases that the peer connection get to
an end of file but DLM still holds membership of the node. In
this time DLM can still trigger new message which we should allow. After
the cluster manager node removal event occurs it safe to close the
connection.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unaligned memory access handling for receiving
midcomms messages. This handling will not fix the unaligned memory
access in general. All messages should be length aligned to 8 bytes,
there exists cases where this isn't the case. It's part of the sending
handling to not send such messages. As the sending handling itself, with
the internal allocator of page buffers, can occur in unaligned memory
access of dlm message fields we just ignore that problem for now as it
seems this code is used by architecture which can handle it.
This patch adds a comment to take care about that problem in a major
bump of dlm protocol.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds an additional check for minimum dlm header size which is
an invalid dlm message and signals a broken stream. A msglen field cannot
be less than the dlm header size because the field is inclusive header
lengths.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch reworks the current receive handling of dlm. As I tried to
change the send handling to fix reorder issues I took a look into the
receive handling and simplified it, it works as the following:
Each connection has a preallocated receive buffer with a minimum length of
4096. On receive, the upper layer protocol will process all dlm message
until there is not enough data anymore. If there exists "leftover" data at
the end of the receive buffer because the dlm message wasn't fully received
it will be copied to the begin of the preallocated receive buffer. Next
receive more data will be appended to the previous "leftover" data and
processing will begin again.
This will remove a lot of code of the current mechanism. Inside the
processing functionality we will ensure with a memmove() that the dlm
message should be memory aligned. To have a dlm message always started
at the beginning of the buffer will reduce some amount of memmove()
calls because src and dest pointers are the same.
The cluster attribute "buffer_size" becomes a new meaning, it's now the
size of application layer receive buffer size. If this is changed during
runtime the receive buffer will be reallocated. It's important that the
receive buffer size has at minimum the size of the maximum possible dlm
message size otherwise the received message cannot be placed inside
the receive buffer size.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license v 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 45 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.342746075@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ls_allocation for memory allocations, which a cluster fs sets to
GFP_NOFS. Use GFP_NOFS for allocations when no lockspace struct is
available. Taking dlm locks needs to avoid calling back into the
cluster fs because write-out can require taking dlm locks.
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
* check that length is large enough to cover the non-variable part of message or
rcom resp. (after checking that it's large enough to cover the header, of
course).
* kill more pointless casts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Teigland <teigland@redhat.com>
gcc does not guarantee that an auto buffer is 64bit aligned.
This change allows sparc64 to work.
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv
threads while working in the dlm. This allows dlm_recv activity to be
suspended when the lockspace transitions to, from and between recovery
cycles.
The specific bug prompting this change is one where an in-progress
recovery cycle is aborted by a new recovery cycle. While dlm_recv was
processing a recovery message, the recovery cycle was aborted and
dlm_recoverd began cleaning up. dlm_recv decremented recover_locks_count
on an rsb after dlm_recoverd had reset it to zero. This is fixed by
suspending dlm_recv (taking write lock on the rwsem) before aborting the
current recovery.
The transitions to/from normal and recovery modes are simplified by using
this new ability to block dlm_recv. The switch from normal to recovery
mode means dlm_recv goes from processing locking messages, to saving them
for later, and vice versa. Races are avoided by blocking dlm_recv when
setting the flag that switches between modes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch). No functional changes in this patch, just naming changes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the core of the distributed lock manager which is required
to use GFS2 as a cluster filesystem. It is also used by CLVM and
can be used as a standalone lock manager independantly of either
of these two projects.
It implements VAX-style locking modes.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
